PRESET

RECALL

MULTI
CONTROL

DOLBY SURROUND
AUDIO/VIDEO MULTI-CHANNEL RECEIVER N∫m¿Û¯.˘ P R O · L O G I C

STANDBY
Î
5-D DOLBY VIRTUAL DSP VCR/ TAPE 2
THEATER PRO LOGIC /SRS MODE TAPE 1 DVD/TV LD/SAT CD FM/AM PHONO MONITOR

DVD
DVD5.1CH
5.1CH

MASTER
STANDBY/ON VOLUME

LOUDNESS MUTING MPX MODE MEMORY CLASS

PHONES

5-CHANNEL EQUAL POWER OUTPUT

SPEAKERS DIRECT
TUNING
SELECT – STATION

– FREQUENCY +
+
SELECT –

L
TONE

BALANCE
+

R
MIN MAX
Î
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT ORDER NO.
RRV2079

AUDIO/VIDEO MULTI-CHANNEL RECEIVER

VSX-D458
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type Power Requirement Remarks
VSX-D458
KUXJI AC120V
KCXJI AC120V

CONTENTS
1. SAFETY INFORMATION ...................................... 2 7. GENERAL INFORMATION ................................. 38
2. EXPLODED VIEWS AND PARTS LIST ................ 3 7.1 PARTS ......................................................... 38
3. SCHEMATIC DIAGRAM ....................................... 8 7.1.1 IC ........................................................... 38
4. PCB CONNECTION DIAGRAM .......................... 22 7.1.2 DISPLAY ............................................... 46
5. PCB PARTS LIST ............................................... 30 7.2 DIAGNOSIS ................................................. 48
6. ADJUSTMENT .................................................... 38 7.3 BLOCK DIAGRAM ....................................... 49
8. PANEL FACILITIES AND SPECIFICATIONS ..... 50

PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER ELECTRONIC CORPORATION 1998
T – ZZK DEC. 1998 Printed in Japan
VSX-D458

1. SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual
do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to
cause cancer, birth defects or other reproductive harm.
Health & Safety Cod e Section 25249.6 – Proposition 65

NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement
parts must be of identical designation.
REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que
les pièces de remplacement doivent avoir la même désignation.

(FOR USA MODEL ONLY)

1. SAFETY PRECAUTIONS ANY MEASUREMENTS NOT WITHIN THE
The following check should be performed for the LIMITS OUTLINED ABOVE ARE INDICATIVE
continued protection of the customer and service
technician.
OF A POTENTIAL SHOCK HAZARD AND
LEAKAGE CURRENT CHECK MUST BE CORRECTED BEFORE RETURN-
Measure leakage current to a known earth ground ING THE APPLIANCE TO THE CUSTOMER.
(water pipe, conduit, etc.) by connecting a leakage
current tester such as Simpson Model 229-2 or 2. PRODUCT SAFETY NOTICE
equivalent between the earth ground and all exposed Many electrical and mechanical parts in the appliance
metal parts of the appliance (input/output terminals, have special safety related characteristics. These are
screwheads, metal overlays, control shaft, etc.). Plug often not evident from visual inspection nor the
the AC line cord of the appliance directly into a 120V protection afforded by them necessarily can be obtained
AC 60 Hz outlet and turn the AC power switch on. Any by using replacement components rated for voltage,
current measured must not exceed 0.5 mA. wattage, etc. Replacement parts which have these
special safety characteristics are identified in this
Service Manual.
Electrical components having such features are
Reading should identified by marking with a on the schematics and
not be above
Leakage 0.5 mA on the parts list in this Service Manual.
current
Device tester The use of a substitute replacement component which
under does not have the same safety characteristics as the
test
PIONEER recommended replacement one, shown in the
Test all parts list in this Service Manual, may create shock, fire,
exposed metal or other hazards.
surfaces
Product Safety is continuously under review and new
instructions are issued from time to time. For the latest
information, always consult the current PIONEER
Also test with Service Manual. A subscription to, or additional copies
plug reversed
(Using AC adapter Earth
of, PIONEER Service Manual may be obtained at a
plug as required) ground nominal charge from PIONEER.
AC Leakage Test

2
 VSX-D458

2. EXPLODED VIEWS AND PARTS LIST

NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Screws adjacent to mark on the product are used for disassembly.

2.1 PACKING

12
1

4 8 (2/2)

8 (1/2)
3

10
9 (2/2)
5

9 (1/2)

11

(1) PACKING PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
1 FM Antenna ADH7004 6 Battery Cover RZN1156
2 AM Loop Antenna ATB7009 NSP 7 Dry Cell Battery(R6P, AA) VEM-013
3 Operating Instructions See Contrast table (2) 8 Left Pad AHA7201
NSP 4 Warranty Card See Contrast table (2) 9 Right Pad AHA7202
5 Remote Control Unit AXD7207 10 Packing Sheet AHG7010
(CU-VSX153)
11 Packing Case AHD7730
12 Polyethylene Bag Z21-038
(0.03×230×340)

(2) CONTRAST TABLE

VSX-D458/KUXJI and KCXJI are constructed the same except for the following :
Part No.
Mark No. Symbol and Description VSX-D458 VSX-D458 Remarks
/KUXJI /KCXJI
3 Operating Instructions (English) ARB7178 Not used
3 Operating Instructions (English/French) Not used ARE7202
NSP 4 Warranty Card ARY7023 ARY7024

3
VSX-D458

2.2 EXTERIOR SECTION

37

37
KCXJI
Types 38
4 35
only
12
3 42
13
5
36
37

37
37
37
37
37
6 38
19 32
14
37 16 37
38 15
23 37
21
8
37 37
37
37
9
41
22
37
37
41
30
30 39
37
11
40
2
1
37 17
34
29
31 33
33 7
37 27
A 31
35
31 37
10
28 37
from No.15 A
Input Button
(Page 6)
37
33
27

26
37
37 18
from No.15
Input Button 25
(Page 6)

37

Refer to
37 "2.3 FRONT PANEL SECTION".

37

4
 VSX-D458

(1) EXTERIOR SECTION PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
1 INPUT Assy AWX7091 20 ······
2 R/C SP & 6CH Assy AWX7092 21 Heat Sink 45 Holder R ANG7174
3 REG Assy AWX7093 22 Heat Sink 45 Holder F ANG7175
NSP 4 REG CONNECTION Assy AWX7157 NSP 23 Heat Sink 45 ANH7070
NSP 5 PS CONNECTION Assy AWX7158 24 ······

6 POWER SUPPLY Assy See Contrast table (2) 25 Insulator AMR7198

7 VIDEO Assy AWX7098 26 Foot Assy REC1263
8 TRANS Assy AWX7099 27 Heat Sink 45 Holder B ANG7176
9 PRIMARY Assy AWX7160 28 Trans Frame ANG7183
10 FM/AM TUNER Unit AXX7046 29 Heat Sink S 45 Holder ANG7185

11 Power Transformer See Contrast table (2) 30 Screw ABA7043

(T1 : AC120V) 31 PCB Mold AMR2533
12 Fuse (FU2 : 6.3A) VEK1026 32 Cord Stopper CM-22C
13 Fuse (FU1 : 10A) REK1087 NSP 33 Card Spacer DEC1770
14 AC Power Cord PDG1064 NSP 34 PCB Holder PNW2100

15 Flat Flexible Cable (13P) ADD7086 NSP 35 Binder RNE1277

16 Flat Flexible Cable (22P) ADD7087 36 Bonnet Case AZN7711
17 Flat Flexible Cable (12P) ADD7090 37 Screw BBZ30P080FZK
NSP 18 Under Base ANA7066 38 Screw BBZ30P200FMC
19 Rear Panel See Contrast table (2) 39 Screw BBZ30P080FMC

40 Spacer AEB7118
41 Screw ABA7044
42 Fuse (FU4 : 10A) See Contrast table (2)

(2) CONTRAST TABLE

VSX-D458/KUXJI and KCXJI are constructed the same except for the following :
Part No.
Mark No. Symbol and Description VSX-D458 VSX-D458 Remarks
/KUXJI /KCXJI
6 POWER SUPPLY Assy AWX7096 AWX7194
11 Power Transformer (T1 : AC120V) ATS7207 ATS7208
19 Rear Panel ANC7795 ANC7796
42 Fuse (FU4 : 10A) Not used REK1087

5
VSX-D458

2.3 FRONT PANEL SECTION

21
22 21
3

21

8 2 21
5 21
14
6 21
22
7
23

12
19
21

13
21
9 1

10

4
CUT
17
18

CUT 20
15

20
16

11

• FRONT PANEL SECTION PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
NSP 1 HP & FAV Assy AWX7094 11 Round Knob L AAB7082
2 FL & UCOM Assy AWX7095 12 Power Button AAD7325
3 POWER SW Assy AWX7100 13 Function Button AAD7328
4 VOLUME Assy AWX7097 14 SFC Button AAD7329
5 Flat Flexible Cable (40P) ADD7084 15 Input Button AAD7438

6 Flat Flexible Cable (7P) ADD7085 16 Sub Panel AAP7038

7 Flat Flexible Cable (7P) ADD7088 17 Front Panel AMB7606
8 Flat Flexible Cable (4P) ADD7089 NSP 18 Getter AAX7628
9 Fl Filter AAK7294 19 PIONEER Badge PAM1776
10 Fl Panel AAK7533 20 Screw BPZ30P080FZK

21 Screw BPZ30P080FMC
22 Screw ABA7009
23 Screw ABA7046

6
VSX-D458

7
 1 2 3 4
VSX-D458

3. SCHEMATIC DIAGRAM
3.1 OVERALL CONNECTIONS
A

G
FL&UCOM
ASSY
M AWX7095
VOLUME
ASSY
AWX7097
E ( E 1/2- E 2/2)
INPUT ASSY
AWX7091
B

VIDEO ASSY
AWX7098
L A
R/C SP&6CH ASSY
AWX7092
FUSE LIST
VSX - D458
KUXJI KCXJI
10A
FU 1 (REK1087)
6.3A
FU 2 (VEK1026)
10A
D FU 4 (REK1087)

8
1 2 3 4
 5 6 7 8
VSX-D458

Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".

H POWER SW
ASSY
AWX7100

HP&FAV ASSY
C AWX7094

J
PRIMARY
ASSY
AWX7160
B

K
TRANS
ASSY
AWX7099

D
REG ASSY REG CONNECTION
AWX7093
B ASSY
AWX7157
C
I
POWER SUPPLY
ASSY
AWX7096(KUXJI)
AWX7194(KCXJI)
F
AC POWER CORD : PDG1064
PS CONNECTION
ASSY
AWX7158

9
5 6 7 8
 1 2 3 4
VSX-D458

3.2 R/C SP&6CH ASSY

A

A I 713
R/C SP&6CH ASSY
AWX7092

AKE7020
E 2/2
CN352

L
CN902

REAR/CENTER SPEAKER OUT& 6CH INPUT BLOCK

10 A
1 2 3 4
 1 2 3 4
VSX-D458

3.3 REG, HP&FAV AND REG CONNECTION ASSEMBLIES

A

C HP&FAV ASSY
AWX7094
D HEADPHONE OUTPUT
BLOCK
REG CONNECTION
ASSY
AWX7157

I CN715 B

G CN603

REGULATOR BLOCK

E 1/2
102

REG ASSY
B AWX7093

3
B C D 11
1 2 4
 1 2 3 4
VSX-D458

3.4 INPUT ASSY(1/2)

A G CN601
E 1/2
INPUT ASSY
AWX7091

C
100p
SL

SMALL SIGNAL BLOCK L CN901

12 E 1/2
1 2 3 4
 5 6 7 8
VSX-D458

B 502 A

: AUDIO SIGNAL ROUTE

Direct OFF
PRO Logic OFF
5-D OFF
DSP Mode OFF
CD Input

M CN801
C
2.7k
15k

E 2/2 M CN802
15k

F 581 D

L CN901

7
E 1/2 13
5 6 8
 1 2 3 4
VSX-D458

3.5 INPUT ASSY(2/2) AND PS CONNECTION ASSY

14 E 2/2
1 2 3 4
5 6 7 8
VSX-D458

E 2/2
INPUT ASSY
AWX7091

POWER AMP BLOCK

E 1/2 I CN714
105

A 401

F
PS CONNECTION
ASSY
AWX7158
D

7
E 2/2 F 15
5 6 8
 1 2 3 4
VSX-D458

3.6 FL&UCOM AND POWER SW ASSEMBLIES

A
E 1/2 CN101

M CN803

C
C CN551

POWER SW ASSY
S981 : 5-D THERTER
S982 : POWER STANDBY/ON
S983 : DOLBY PRO LOGIC
S984 : DSP MODE
S985 : VIRTUAL/SRS

D
H POWER SW
ASSY
AWX7100

16 G H
1 2 3 4
5 6 7 8
VSX-D458

G
FL&UCOM FRONT BLOCK
ASSY
AWX7095

FL&UCOM ASSY C
S601 : TONE/BALANCE +/R
S602 : TONE/BALANCE –/L
S603 : TAPE2 MONITOR
S604 : PHONO
S605 : FM/AM
S606 : CD
S607 : LD/SAT
S608 : DVD/TV
S609 : VCR/TAPE1
S610 : TONE/BALANCE SELECT
S611 : CLASS
S612 : ST/FEQ. –
S613 : ST/FEQ. TUNING SELECT
S614 : MEMORY
S615 : ST/FEQ. +
S616 : MUTING
S617 : MPX MODE
S618 : DIRECT
S619 : SPEAKERS
S620 : LOUDNESS

G 17
5 6 7 8
 1 2 3 4
VSX-D458

3.7 POWER SUPPLY, PRIMARY AND TRANS ASSEMBLIES

A

POWER SUPPLY ASSY

S711 : IMPEDANCE SELECTOR

10/50
F

C739
CN582

A CN404

KM200TA13
POWER SUPPLY BLOCK

D CN572

• NOTE FOR FUSE REPLACEMENT

CAUTION - FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.
REPLACE WITH SAME TYPE AND RATINGS ONLY.

18 I
1 2 3 4
 5 6 7 8
VSX-D458

A
POWER SUPPLY
I ASSY
AWX7096(KUXJI)
AWX7194(KCXJI)

TRANS
K ASSY
AWX7099
KUXJI
ONLY

KCXJI H707 H708

ONLY
AKR1004

FU4
REK1087
(10A/125V)
B

H707 H708 FU4

AWX7096 JP
AWX7194

CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.

REPLACE ONLY WITH SAME TYPE NO. 49103.5 MFD, BY
LITTELFUSE INK. FOR IC951, 952 (AEK7017).

PRIMARY
ASSY
J AWX7160
VEK1026
(6.3A/125V)
ASR7016

REK1087
(10A/125V) LIVE

NEUTRAL
D

I J K 19
5 6 7 8
 1 2 3 4
VSX-D458

3.8 VIDEO ASSY

A

VIDEO ASSY
L AWX7098

VIDEO & SR BLOCK

D A CN401 E 1/2 CN106

20 L 1 2 3 4
 1 2 3 4
VSX-D458

3.9 VOLUME ASSY

A

VOLUME
M ASSY
VOLUME CONTROL BOLCK

AWX7097

YY
0.01 0.01
YY
G

1.5k
CN602

1.5k
B

470

R850
2.7
220/10

E 1/2 CN104
E 1/2 CN103 D

3
M 21
1 2 4
VSX-D458

4. PCB CONNECTION DIAGRAM

NOTE FOR PCB DIAGRAMS :
1. Part numbers in PCB diagrams match those in the schematic 3. The parts mounted on this PCB include all necessary parts for
diagrams. several destinations.
2. A comparison between the main parts of PCB and schematic For further information for respective destinations, be sure to
diagrams is shown below. check with the schematic diagram.
Symbol In PCB Symbol In Schematic 4. View point of PCB diagrams.
Part Name
Diagrams Diagrams
B C E B C E
Connector Capacitor
Transistor
B C E

B C E B C E SIDE A
Transistor
B C E with resistor

D G S D G S
Field effect
D G S transistor
P.C.Board Chip Part SIDE B

Resistor array

3-terminal
regulator

22
 1 2 3 4
VSX-D458

4.1 R/C SP&6CH, REG, HP&FAV AND REG CONNECTION ASSEMBLIES

A R/C SP&6CH ASSY (ANP7234-B)
A

IC422
SIDE A
L CN902
IC421

Q401
Q405
Q402
D REG CONNECTION
ASSY

E 2/2 CN352

I CN715

B REG ASSY

I 713
C

C HP&FAV ASSY
IC501 IC502 IC503

E 1/2 102

Q551

Q552

G CN603

1 2 3
A B C D 4
23
 1 2 3 4
VSX-D458

4.2 INPUT AND PS CONNECTION ASSEMBLIES

L CN901 TO TUNER UNIT
A
G CN601

B 502

F PS CONNECTION
ASSY
I
D CN714

24 E F
1 2 3 4
 5 6 7 8
VSX-D458

UNIT SIDE A
A

IC202

IC101,Q181,Q182

IC182,IC141,IC222

Q293

Q291

Q292

M CN802
M CN801
B
IC102
IC252,IC181

IC251,IC201

IC151,IC253,IC221

Q351-356

Q102,Q1304

Q1352,Q362

Q361,Q1303

Q1302
C
Q303,Q1351,Q1301,Q1305

Q301,Q302,Q304,Q1306

Q305,Q306

IC301,IC302

4 D

E INPUT ASSY
(ANP7234-B)

5 6 7
E
8
25
 1 2 3 4
VSX-D458

4.3 FL&UCOM AND POWER SW ASSEMBLIES

Q607
Q603
Q602
A Q601 Q606 IC601 Q60

C CN551
G FL&UCOM ASSY
(ANP7235-C)

26 G
1 2 3 4
 5 6 7 8
VSX-D458

E 1/2 CN101 M CN803

Q605 Q604 A

SIDE A

H POWER SW ASSY

7
G H 27
5 6 8
 1 2 3 4
VSX-D458

4.4 POWER SUPPLY, PRIMARY AND TRANS ASSEMBLIES

A CN404 SIDE A
A F CN582
I POWER SUPPLY ASSY

C
Q701 Q712 Q711 Q713
AC POWER CORD

IC701 IC712 Q714

D 572 Q715 IC711

NEUTRAL
LIVE
J PRIMARY
ASSY

IC951
IC952

D (ANP7235-C)

K TRANS ASSY
28 I J K
1 2 3 4
 1 2 3 4
VSX-D458

4.5 VIDEO AND VOLUME ASSEMBLIES

(ANP7235-C) L VIDEO ASSY SIDE A
A

IC901

Q901
E 1/2 CN106
Q902

A CN401

Q932
B

Q931

Q933

E 1/2 CN103 E 1/2 CN104

M VOLUME ASSY

IC804 IC802 Q806 Q804 Q802

IC803 Q808 Q803 Q801
Q807
G CN102 Q805
IC801

3
L M 29
1 2 4
VSX-D458

5. PCB PARTS LIST

NOTES: ¶Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
¶The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
¶When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω = 56 × 101 = 561 ........................................................ RD1/4PU 5 6 1 J
47k Ω = 47 × 103 = 473 ........................................................ RD1/4PU 4 7 3 J
0.5 Ω = R50 ..................................................................................... RN2H Â 5 0 K
1Ω = 1R0 ..................................................................................... RS1P 1 Â 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω = 562 × 101 = 5621 ...................................................... RN1/4PC 5 6 2 1 F

LIST OF ASSEMBLIES
Part No.
Mark PCB Assemblies VSX-D458 Remarks
KUXJI KCXJI
NSP MOTHER ASSY AWK7429 AWK7429
INPUT ASSY AWX7091 AWX7091
R/C SP&6CH ASSY AWX7092 AWX7092
REG ASSY AWX7093 AWX7093
NSP HP&FAV ASSY AWX7094 AWX7094
NSP REG CONNECTION ASSY AWX7157 AWX7157
NSP PS CONNECTION ASSY AWX7158 AWX7158

NSP FRONT&PS ASSY AWK7430 AWK7466

FL&UCOM ASSY AWX7095 AWX7095
POWER SUPPLY ASSY AWX7096 AWX7194
VOLUME ASSY AWX7097 AWX7097
VIDEO ASSY AWX7098 AWX7098
TRANS ASSY AWX7099 AWX7099
POWER SW ASSY AWX7100 AWX7100

PARTS LIST
Mark No. Description Parts No. Mark No. Description Parts No.

A R/C SP&6CH ASSY C407

C421
CERAMIC CAPACITOR
ELECT. CAPACITOR
CGCYX473M16
CEAT2R2M50
SEMICONDUCTORS C422 ELECT. CAPACITOR CEAT2R2M50
C423 ELECT. CAPACITOR CEAT2R2M50
IC421 OP-AMP IC NJM4558D-D C424 ELECT. CAPACITOR CEAT2R2M50
IC422 OP-AMP IC NJM4558D-D
Q401 TRANSISTOR KRA103M C425 CERAMIC CAPACITOR CKPUYY103M16
Q402 TRANSISTOR 2SC1740S C426 CERAMIC CAPACITOR CKPUYY103M16
Q405 TRANSISTOR 2SC2878 C427 CERAMIC CAPACITOR CKPUYY103M16
C428 CERAMIC CAPACITOR CKPUYY103M16
D401 DIODE 1SS254 C431 CERAMIC CAPACITOR CGCYX473M16
D402 DIODE 1SS254

RESISTORS
COILS AND FILTERS
R401 CARBON FILM RESISTOR RD1/4PMF100J
L401 COIL (0.7µH) ATH1004 R403 CARBON FILM RESISTOR RD1/4PMF100J
L403 COIL (0.7µH) ATH1004 R404 CARBON FILM RESISTOR RD1/4PMF100J
L404 COIL (0.7µH) ATH1004 R405 METAL OXIDE RESISTOR RS1LMF4R7J
R407 METAL OXIDE RESISTOR RS1LMF4R7J
SWITCHES AND RELAYS
RY401 RELAY ASR7001 R408 METAL OXIDE RESISTOR RS1LMF4R7J
RY402 RELAY ASR7001 Other Resistors RD1/4PU&&&J

CAPACITORS OTHERS
C401 FILM CAPACITOR CFTLA104J50 401 CABLE HOLDER (3P) 51052-0300
C403 FILM CAPACITOR CFTLA104J50 403 PIN JACK (6P) AKB7089
C404 FILM CAPACITOR CFTLA104J50 CN401 CONNECTOR 52045-1245
C405 CERAMIC CAPACITOR CGCYX473M16 CN402 SPEAKER TERMINAL 6-P AKE7020
C406 CERAMIC CAPACITOR CGCYX473M16 CN404 6PJUMPERCONNECTOR KPD6

J17 JUMPER WIRE DYY03-200-2651

30
 VSX-D458

Mark No. Description Parts No. Mark No. Description Parts No.

B REG ASSY IC251

IC252
DSP IC
SRAM
AK7712A-VQ
KM62256DLG-7L
IC253 IC AK4310-VM
SEMICONDUCTORS IC254 HEX INVERTER TC74HC04AF
IC501 REGULATOR IC NJM78M12FA IC301 AUDIO IC PAC007A
IC502 REGULATOR IC NJM79M12FA
IC503 REGULATOR IC NJM78M05FA IC302 AUDIO IC PAC007A
IC303 AUDIO IC PAC008A
CAPACITORS Q1301 TRANSISTOR 2SC2878
C501 CERAMIC CAPACITOR CKCYF103Z50 Q1302 TRANSISTOR 2SC2878
C502 CERAMIC CAPACITOR CKCYF103Z50 Q1303 TRANSISTOR 2SC2240
C503 ELECT. CAPACITOR CEAT101M16
C504 ELECT. CAPACITOR CEAT101M16 Q1304 TRANSISTOR 2SC2240
C505 CERAMIC CAPACITOR CKCYF103Z50 Q1305 TRANSISTOR 2SC2705
Q1306 TRANSISTOR 2SC2705
C506 ELECT. CAPACITOR CEAT101M10 Q1351 TRANSISTOR 2SC2878
C507 ELECT. CAPACITOR CEAT471M25 Q1352 TRANSISTOR 2SC2240

Q181 TRANSISTOR 2SC1740S

RESISTORS Q182 TRANSISTOR 2SC1740S
R501 METAL OXIDE RESISTOR RS3LMF330J Q291 TRANSISTOR 2SA933S
Q292 TRANSISTOR DTC124TS
Q293 TRANSISTOR 2SC1740S
OTHERS
501 13P CABLE HOLDER 51048-1300 Q301 TRANSISTOR 2SC2878
502 12P CABLE HOLDER 51048-1200 Q302 TRANSISTOR 2SC2878
Q303 TRANSISTOR 2SC2240
Q304 TRANSISTOR 2SC2240
C HP&FAV ASSY Q305 TRANSISTOR 2SC2705

SEMICONDUCTORS Q306 TRANSISTOR 2SC2705

Q551 TRANSISTOR 2SC2878 Q351 TRANSISTOR KRA103M
Q552 TRANSISTOR 2SC2878 Q352 TRANSISTOR KRC101M
Q355 TRANSISTOR KRA103M
Q356 TRANSISTOR KRC101M
CAPACITORS
C551 CERAMIC CAPACITOR CGCYX104M16 Q361 TRANSISTOR 2SC1740S
Q362 TRANSISTOR 2SC1740S
D1301 DIODE 1SS254
RESISTORS D1302 DIODE 1SS254
R551 CARBON FILM RESISTOR RD1/2PM470J D1303 DIODE 1SS254
R552 CARBON FILM RESISTOR RD1/2PM470J
R555 CARBON FILM RESISTOR RD1/2PM680J D1304 DIODE 1SS254
R556 CARBON FILM RESISTOR RD1/2PM680J D1305 DIODE 1SS254
Other Resistors RD1/4PU&&&J D1306 DIODE 1SS254
D1307 DIODE 1SS254
OTHERS D1308 DIODE 1SS254
551 GROUND PLATE VNF-091
CN551 CONNECTOR 52045-0445 D1309 DIODE 1SS254
JA553 JACK RKN1002 D1310 DIODE 1SS254
D1311 DIODE 1SS254
D1312 DIODE 1SS254
D1351 DIODE 1SS254
D REG CONNECTION ASSY
D1352 DIODE 1SS254
OTHERS D1353 DIODE 1SS254
571 13P CABLE HOLDER 51048-1300 D1354 DIODE 1SS254
CN572 13P SOCKET KP200TA13L D1355 DIODE 1SS254
D151 DIODE 1SS254

E INPUT ASSY D152

D153
DIODE
DIODE
1SS254
1SS254
D154 DIODE 1SS254
SEMICONDUCTORS D201 ZENER DIODE MTZJ10B
IC101 IC UPC4570C D301 DIODE 1SS254
IC102 ANALOG SWITCH IC TC9273N-007
IC141 E-SW IC TC9163AN D302 DIODE 1SS254
IC151 OP-AMP IC NJM4558D-D D303 DIODE 1SS254
IC181 OP-AMP IC NJM4558D-D D304 DIODE 1SS254
D305 DIODE 1SS254
IC182 E-VR IC M62420FP D306 DIODE 1SS254
IC201 OP-AMP IC NJM4558D-D
IC202 DIGI. SOUND CONTROLL M62429P
IC221 OP-AMP IC NJM4558D-D
IC222 DIGI. SOUND CONTROLL M62429P

31
VSX-D458

Mark No. Description Parts No. Mark No. Description Parts No.
D307 DIODE 1SS254 C1354 ELECT. CAPACITOR CEANP2R2M2A
D308 DIODE 1SS254 C1355 ELECT. CAPACITOR CEAT101M25
D309 DIODE 1SS254 C1356 CERAMIC CAPACITOR CCCSL180J50
D310 DIODE 1SS254 C1357 CERAMIC CAPACITOR CCCCH101J50
D311 DIODE 1SS254 C1358 CERAMIC CAPACITOR CCCSL221K2H

D312 DIODE 1SS254 C1359 CERAMIC CAPACITOR CKCYB102K50

D352 DIODE 1SS254 C1360 CERAMIC CAPACITOR CCCSL101K2H
D353 DIODE 1SS254 C1361 CERAMIC CAPACITOR CCCSL470J50
C1362 ELECT. CAPACITOR CEAT1R0M2A
C1363 ELECT. CAPACITOR CEAT4R7M2A
COILS AND FILTERS
L181 AXIAL INDUCTOR LAU220J C1364 ELECT. CAPACITOR CEAT4R7M2A
L182 AXIAL INDUCTOR LAU220J C1365 ELECT. CAPACITOR CEANP2R2M50
L251 AXIAL INDUCTOR LAU220J C1366 FILM CAPACITOR CFTLA334J50
L252 AXIAL INDUCTOR LAU2R2J C141 CERAMIC CAPACITOR CGCYX473M16
L253 AXIAL INDUCTOR LAUR22J C142 CERAMIC CAPACITOR CGCYX473M16
L254 AXIAL INDUCTOR LAUR22J C145 CERAMIC CAPACITOR CCCSL101J50
L301 COIL (0.7µH) ATH1004 C151 ELECT. CAPACITOR CEAT2R2M50
L302 COIL (0.7µH) ATH1004 C152 ELECT. CAPACITOR CEAT2R2M50
C153 ELECT. CAPACITOR CEAT221M16
SWITCHES AND RELAYS C154 ELECT. CAPACITOR CEAT221M16
RY352 RELAY ASR7001
RY353 RELAY ASR7001 C155 ELECT. CAPACITOR CEAT101M10
C156 ELECT. CAPACITOR CEAT101M10
C157 FILM CAPACITOR CQMBA102J50
CAPACITORS C158 FILM CAPACITOR CQMBA102J50
C101 ELECT. CAPACITOR CEAT100M50 C159 CERAMIC CAPACITOR CGCYX103M16
C102 ELECT. CAPACITOR CEAT100M50
C103 ELECT. CAPACITOR CEAT470M16 C160 CERAMIC CAPACITOR CGCYX103M16
C104 ELECT. CAPACITOR CEAT470M16 C161 ELECT. CAPACITOR CEAT4R7M50
C105 FILM CAPACITOR CQMBA822J50 C162 ELECT. CAPACITOR CEAT4R7M50
C163 ELECT. CAPACITOR CEAT101M16
C106 FILM CAPACITOR CQMBA822J50 C164 ELECT. CAPACITOR CEAT101M16
C107 MYLAR FILM CAPACITOR CQMA242J50
C108 MYLAR FILM CAPACITOR CQMA242J50 C165 FILM CAPACITOR CQMBA471J50
C109 ELECT. CAPACITOR CEAT2R2M50 C166 FILM CAPACITOR CQMBA471J50
C110 ELECT. CAPACITOR CEAT2R2M50 C179 CERAMIC CAPACITOR CKPUYX682M16
C180 CERAMIC CAPACITOR CKPUYX682M16
C111 CERAMIC CAPACITOR CGCYX103M16 C181 ELECT. CAPACITOR CEAT4R7M50
C112 CERAMIC CAPACITOR CGCYX103M16
C113 CERAMIC CAPACITOR CGCYX103M16 C182 ELECT. CAPACITOR CEAT4R7M50
C114 CERAMIC CAPACITOR CGCYX103M16 C183 FILM CAPACITOR CQMBA152J50
C115 CERAMIC CAPACITOR CCCSL101J50 C184 FILM CAPACITOR CQMBA152J50
C185 FILM CAPACITOR CQMBA561J50
C1301 CERAMIC CAPACITOR CKCYB821K50 C186 FILM CAPACITOR CQMBA561J50
C1302 CERAMIC CAPACITOR CKCYB821K50
C1303 ELECT. CAPACITOR CEAT2R2M50 C187 FILM CAPACITOR CQMBA152J50
C1304 ELECT. CAPACITOR CEAT2R2M50 C188 FILM CAPACITOR CQMBA152J50
C1305 ELECT. CAPACITOR CEANP2R2M2A C189 ELECT. CAPACITOR CEAT4R7M50
C190 ELECT. CAPACITOR CEAT4R7M50
C1306 ELECT. CAPACITOR CEANP2R2M2A C191 FILM CAPACITOR CFTLA223J50
C1307 CERAMIC CAPACITOR CKCYB102K50
C1308 CERAMIC CAPACITOR CKCYB102K50 C192 FILM CAPACITOR CFTLA223J50
C1311 ELECT. CAPACITOR CEAT101M25 C193 FILM CAPACITOR CFTLA474J50
C1312 ELECT. CAPACITOR CEAT101M25 C194 FILM CAPACITOR CFTLA474J50
C195 FILM CAPACITOR CFTLA103J50
C1313 ELECT. CAPACITOR CEAT1R0M50 C196 FILM CAPACITOR CFTLA103J50
C1314 ELECT. CAPACITOR CEAT1R0M50
C1315 CERAMIC CAPACITOR CCCSL470J50 C197 ELECT. CAPACITOR CEAT4R7M50
C1316 CERAMIC CAPACITOR CCCSL470J50 C198 ELECT. CAPACITOR CEAT4R7M50
C1317 CERAMIC CAPACITOR CCCSL180J50 C199 CERAMIC CAPACITOR CGCYX473M16
C200 CERAMIC CAPACITOR CGCYX473M16
C1318 CERAMIC CAPACITOR CCCSL180J50 C201 ELECT. CAPACITOR CEAT100M50
C1321 ELECT. CAPACITOR CEAT4R7M2A
C1322 ELECT. CAPACITOR CEAT4R7M2A C202 ELECT. CAPACITOR CEAT4R7M50
C1323 ELECT. CAPACITOR CEANP2R2M50 C203 ELECT. CAPACITOR CEAT221M10
C1324 ELECT. CAPACITOR CEANP2R2M50 C204 CERAMIC CAPACITOR CKCYB102K50
C207 ELECT. CAPACITOR CEAT101M16
C1325 FILM CAPACITOR CFTLA334J50 C211 ELECT. CAPACITOR CEAT4R7M50
C1326 FILM CAPACITOR CFTLA334J50
C1351 CERAMIC CAPACITOR CKCYB821K50
C1352 ELECT. CAPACITOR CEAT2R2M50
C1353 ELECT. CAPACITOR CEANP2R2M2A

32
 VSX-D458

Mark No. Description Parts No. Mark No. Description Parts No.
C212 ELECT. CAPACITOR CEAT4R7M50 C274 CERAMIC CAPACITOR CGCYX104M16
C213 FILM CAPACITOR CQMBA152J50 C275 ELECT. CAPACITOR CEAT100M50
C214 FILM CAPACITOR CQMBA152J50 C276 CERAMIC CAPACITOR CGCYX103M16
C215 FILM CAPACITOR CQMBA561J50 C277 CERAMIC CAPACITOR CGCYX104M16
C216 FILM CAPACITOR CQMBA561J50 C278 ELECT. CAPACITOR CEAT100M50

C217 FILM CAPACITOR CQMBA152J50 C279 CERAMIC CAPACITOR CGCYX104M16

C218 FILM CAPACITOR CQMBA152J50 C280 CERAMIC CAPACITOR CGCYX104M16
C219 ELECT. CAPACITOR CEAT4R7M50 C281 CERAMIC CAPACITOR CGCYX104M16
C220 ELECT. CAPACITOR CEAT4R7M50 C283 CERAMIC CAPACITOR CCCSL100D50
C221 ELECT. CAPACITOR CEAT4R7M50 C284 CERAMIC CAPACITOR CCCSL100D50

C222 ELECT. CAPACITOR CEAT4R7M50 C285 CERAMIC CAPACITOR CCCSL100D50

C223 CERAMIC CAPACITOR CGCYX473M16 C286 CERAMIC CAPACITOR CGCYX104M16
C224 CERAMIC CAPACITOR CGCYX473M16 C287 CERAMIC CAPACITOR CGCYX104M16
C225 CERAMIC CAPACITOR CGCYX103M16 C288 CERAMIC CAPACITOR CGCYX104M16
C227 ELECT. CAPACITOR CEAT4R7M50 C289 CERAMIC CAPACITOR CGCYX103M16

C228 ELECT. CAPACITOR CEAT4R7M50 C291 ELECT. CAPACITOR CEAT101M16

C229 CERAMIC CAPACITOR CCCSL101J50 C293 CERAMIC CAPACITOR CCCSL101J50
C230 CERAMIC CAPACITOR CCCSL101J50 C294 CERAMIC CAPACITOR CCCSL221J50
C231 ELECT. CAPACITOR CEAT4R7M50 C301 CERAMIC CAPACITOR CKCYB821K50
C232 ELECT. CAPACITOR CEAT4R7M50 C302 CERAMIC CAPACITOR CKCYB821K50

C233 FILM CAPACITOR CQMBA152J50 C303 ELECT. CAPACITOR CEAT2R2M50

C234 FILM CAPACITOR CQMBA152J50 C304 ELECT. CAPACITOR CEAT2R2M50
C235 FILM CAPACITOR CQMBA561J50 C305 ELECT. CAPACITOR CEANP2R2M2A
C236 FILM CAPACITOR CQMBA561J50 C306 ELECT. CAPACITOR CEANP2R2M2A
C237 FILM CAPACITOR CQMBA152J50 C307 CERAMIC CAPACITOR CKCYB102K50

C238 FILM CAPACITOR CQMBA152J50 C308 CERAMIC CAPACITOR CKCYB102K50

C239 ELECT. CAPACITOR CEAT4R7M50 C311 ELECT. CAPACITOR CEAT101M25
C240 ELECT. CAPACITOR CEAT4R7M50 C312 ELECT. CAPACITOR CEAT101M25
C241 ELECT. CAPACITOR CEAT4R7M50 C313 ELECT. CAPACITOR CEAT1R0M50
C242 ELECT. CAPACITOR CEAT4R7M50 C314 ELECT. CAPACITOR CEAT1R0M50

C243 CERAMIC CAPACITOR CGCYX473M16 C315 CERAMIC CAPACITOR CCCSL470J50

C244 CERAMIC CAPACITOR CGCYX473M16 C316 CERAMIC CAPACITOR CCCSL470J50
C245 CERAMIC CAPACITOR CGCYX103M16 C317 CERAMIC CAPACITOR CCCSL180J50
C247 ELECT. CAPACITOR CEAT4R7M50 C318 CERAMIC CAPACITOR CCCSL180J50
C248 ELECT. CAPACITOR CEAT4R7M50 C321 ELECT. CAPACITOR CEAT4R7M2A

C249 CERAMIC CAPACITOR CCCSL101J50 C322 ELECT. CAPACITOR CEAT4R7M2A

C250 CERAMIC CAPACITOR CCCSL101J50 C323 ELECT. CAPACITOR CEANP2R2M50
C251 CERAMIC CAPACITOR CGCYX104M16 C324 ELECT. CAPACITOR CEANP2R2M50
C252 CERAMIC CAPACITOR CGCYX104M16 C325 FILM CAPACITOR CFTLA104J50
C253 CERAMIC CAPACITOR CGCYX104M16 C326 FILM CAPACITOR CFTLA104J50

C254 CERAMIC CAPACITOR CCCCH150J50 C327 FILM CAPACITOR CFTLA334J50

C255 CERAMIC CAPACITOR CCCCH150J50 C328 FILM CAPACITOR CFTLA334J50
C256 CERAMIC CAPACITOR CGCYX104M16 C361 ELECT. CAPACITOR CEAT221M10
C257 CERAMIC CAPACITOR CGCYX104M16 C362 CERAMIC CAPACITOR CKCYB102K50
C258 CERAMIC CAPACITOR CGCYX104M16

C259 CERAMIC CAPACITOR CGCYX104M16

RESISTORS
C260 ELECT. CAPACITOR CEAT101M10 R1311 FUSIBLE REGISTOR ACN7036
C261 CERAMIC CAPACITOR CGCYX104M16 (560Ω/ 1/6W)
C262 CERAMIC CAPACITOR CGCYX104M16 R1312 FUSIBLE REGISTOR ACN7036
C263 CERAMIC CAPACITOR CGCYX104M16 (560Ω/ 1/6W)
R1315 CARBON FILM RESISTOR RD1/4PMF331J
C264 ELECT. CAPACITOR CEAT100M50
C265 ELECT. CAPACITOR CEAT101M10 R1316 CARBON FILM RESISTOR RD1/4PMF331J
C266 CERAMIC CAPACITOR CGCYX104M16 R1319 CARBON FILM RESISTOR RD1/4PMF820J
C267 CERAMIC CAPACITOR CGCYX104M16 R1320 CARBON FILM RESISTOR RD1/4PMF820J
C268 ELECT. CAPACITOR CEAT100M50 R1323 RESISTOR (0.22Ω/5W) ACN7035
R1324 RESISTOR (0.22Ω/5W) ACN7035
C269 ELECT. CAPACITOR CEAT101M10
C270 CERAMIC CAPACITOR CGCYX104M16 R1355 FUSIBLE REGISTOR ACN7036
C271 CERAMIC CAPACITOR CGCYX104M16 (560Ω/ 1/6W)
C272 CERAMIC CAPACITOR CCCSL221J50 R1359 CARBON FILM RESISTOR RD1/4PMF331J
C273 ELECT. CAPACITOR CEAT101M10 R1360 CARBON FILM RESISTOR RD1/4PMF331J
R1362 RESISTOR (0.22Ω/5W) ACN7035

33
VSX-D458

Mark No. Description Parts No. Mark No. Description Parts No.
R1368 CARBON FILM RESISTOR RD1/4PMF4R7J D603 DIODE 1SS254
R311 FUSIBLE REGISTOR ACN7036 D604 DIODE 1SS254
(560Ω/ 1/6W) D605 DIODE 1SS254
R312 FUSIBLE REGISTOR ACN7036 D606 DIODE 1SS254
(560Ω/ 1/6W) D607 DIODE 1SS254

R315 CARBON FILM RESISTOR RD1/4PMF331J D608 DIODE 1SS254

R316 CARBON FILM RESISTOR RD1/4PMF331J D609 DIODE 1SS254
R319 CARBON FILM RESISTOR RD1/4PMF820J D610 DIODE 1SS254
R320 CARBON FILM RESISTOR RD1/4PMF820J D611 DIODE 1SS254
R323 RESISTOR (0.22Ω/5W) ACN7035 D612 DIODE 1SS254

R324 RESISTOR (0.22Ω/5W) ACN7035 D613 DIODE 1SS254

R335 CARBON FILM RESISTOR RD1/4PMF100J D614 DIODE 1SS254
R336 CARBON FILM RESISTOR RD1/4PMF100J D615 DIODE 1SS254
R337 METAL OXIDE RESISTOR RS1LMF4R7J D616 DIODE 1SS254
R338 METAL OXIDE RESISTOR RS1LMF4R7J

R351 CARBON FILM RESISTOR RD1/4PMF103J

COILS AND FILTERS
R352 CARBON FILM RESISTOR RD1/4PMF103J L601 AXIAL INDUCTOR LAU2R2J
Other Resistors RD1/4PU&&&J L602 AXIAL INDUCTOR LAU2R2J
L603 AXIAL INDUCTOR LAU2R2J
L604 AXIAL INDUCTOR LAU2R2J
OTHERS
102 12P CABLE HOLDER 51048-1200
105 CABLE HOLDER (11P) 51052-1100
SWITCHES AND RELAYS
115 5P CABLE HOLDER 51048-0500 S601 SWITCH ASG1034
116 5P CABLE HOLDER 51048-0500 S602 SWITCH ASG1034
117 PCB BINDER VEF1040 S603 SWITCH ASG1034
S604 SWITCH ASG1034
118 PCB BINDER VEF1040 S605 SWITCH ASG1034
119 PCB BINDER VEF1040
121 PCB BINDER VEF1040 S606 SWITCH ASG1034
122 PCB BINDER VEF1040 S607 SWITCH ASG1034
CN101 CONNECTOR 52045-4045 S608 SWITCH ASG1034
S609 SWITCH ASG1034
CN103 11P PLUG KM200TA11 S6010 SWITCH ASG1034
CN104 12P PLUG KM200TA12
CN106 22P CONNECTOR 52045-2245 S6011 SWITCH ASG1034
CN107 CONNECTOR 52045-1345 S6012 SWITCH ASG1034
CN111 PIN JACK (4P) AKB7015 S6013 SWITCH ASG1034
S6014 SWITCH ASG1034
CN112 PIN JACK (4P) AKB7015 S6015 SWITCH ASG1034
CN113 PIN JACK (4P) AKB7015
CN114 PIN JACK (4P) AKB7015 S6016 SWITCH ASG1034
CN351 SPEAKER TERMINAL 8-P AKE7006 S6017 SWITCH ASG1034
CN352 3PJUMPERCONNECTOR KPD3 S6018 SWITCH ASG1034
S6019 SWITCH ASG1034
J18 JUMPER WIRE D20PYY0515E SS620 SWITCH ASG1034
X251 XTAL RES (OSC) PSS1008
(19.9344MHz) CAPACITORS
C601 CERAMIC CAPACITOR CKPUYY103M16
C602 CAPACITOR ACH7058
F PS CONNECTION ASSY C603
C604
ELECT. CAPACITOR
CERAMIC CAPACITOR
CEAT221M10
CKPUYY103M16
OTHERS C605 CERAMIC CAPACITOR CKPUYF473Z16
581 11P CABLE HOLDER 51052-1100
CN582 11P PULG KM250NA11L C606 CERAMIC CAPACITOR CKPUYF473Z16
C607 CERAMIC CAPACITOR CGCYX104M16
C608 ELECT. CAPACITOR CEAT2R2M50
C609 ELECT. CAPACITOR CEAT2R2M50
G FL&UCOM ASSY C610 AXIAL CAPACITOR CKPYF103Z50

SEMICONDUCTORS C611 ELECT. CAPACITOR CEAT470M10

IC601 CONTROL MCU PD5442A C612 CERAMIC CAPACITOR CGCYX103M16
Q601 TRANSISTOR KRC101M C613 CERAMIC CAPACITOR CKPUYY103M16
Q602 TRANSISTOR 2SC1740S C614 CERAMIC CAPACITOR CKPUYY103M16
Q603 TRANSISTOR 2SC1740S C615 CERAMIC CAPACITOR CKPUYY103M16
Q604 TRANSISTOR 2SA933S
C616 CERAMIC CAPACITOR CCCSL101J50
Q605 TRANSISTOR 2SA933S C617 CERAMIC CAPACITOR CCCSL101J50
Q606 TRANSISTOR KRC101M C618 ELECT. CAPACITOR CEAT470M10
Q607 TRANSISTOR KRC103M C619 CERAMIC CAPACITOR CCCSL101J50
D601 DIODE 1SS254 C620 CERAMIC CAPACITOR CCCSL101J50
D602 DIODE 1SS254

34
 VSX-D458

Mark No. Description Parts No. Mark No. Description Parts No.
C621 CERAMIC CAPACITOR CCCSL101J50 Q712 POWER MOS FET IRF540A
C622 ELECT. CAPACITOR CEAT101M35 Q713 TRANSISTOR 2SC1845
C623 ELECT. CAPACITOR CEAT470M35 Q714 TRANSISTOR 2SA992
C651 CERAMIC CAPACITOR CCCSL101J50 Q715 TRANSISTOR KRC101M
C652 CERAMIC CAPACITOR CCCSL101J50 D701 ZINER DIODE MTZJ5.1A

C653 CERAMIC CAPACITOR CCCSL101J50 D702 DIODE S5688G

C654 CERAMIC CAPACITOR CCCSL101J50 D703 DIODE 1SS254
C655 CERAMIC CAPACITOR CCCSL101J50 D704 DIODE 1SS254
C656 CERAMIC CAPACITOR CCCSL101J50 D705 DIODE S5688G
C657 CERAMIC CAPACITOR CCCSL101J50 D706 DIODE S5688G

C658 CERAMIC CAPACITOR CCCSL101J50 D707 DIODE S5688G

D708 DIODE S5688G
D709 ZENER DIODE MTZJ22A
RESISTORS D710 ZENER DIODE MTZJ4.3C
All Resistors RD1/4PU&&&J D711 DIODE D5SBA20

OTHERS D712 DIODE D5SBA20

601 REMOTE RECEIVER UNIT GP1U28X D713 ZENNER DIODE MTZJ18B
CN601 CONNECTOR 52045-4045 D714 ZENNER DIODE MTZJ18B
CN602 CONNECTOR XKP3007 D715 DIODE 1SS254
CN603 CONNECTOR XKP3004 D716 DIODE 1SS254
CN604 CONNECTOR XKP3007
COILS AND FILTERS
V601 FL TUBE AAV7054 L701 LINE FILTER ATF1006
X601 CERAMIC RESONATOR ASS1018
(4.19MHz)
TRANSFORMERS
T701 POWER TRANSFORMER ATT1223

H POWER SW ASSY
SWITCHES AND RELAYS
SEMICONDUCTORS S711 SLIDE SWITCH ASH1027
D981 LED(RED) AEL1065 RY701 LOWPOWER RELAY ASR7016

SWITCHES AND RELAYS CAPACITORS

S981 SWITCH ASG1034 C701 ELECT. CAPACITOR CEAT470M10
S982 SWITCH ASG1034 C702 ELECT. CAPACITOR CEAT471M16
S983 SWITCH ASG1034 C703 CERAMIC CAPACITOR CGCYX103M25
S984 SWITCH ASG1034 C704 CKA (10000pF/AC250V) ACG7020
S985 SWITCH ASG1034 C705 CKA (0.022µF/AC400V) ACG1030

C707 ELECT. CAPACITOR CEAT472M25

RESISTORS C708 ELECT. CAPACITOR CEAT472M25
All Resistors RD1/4PU&&&J C709 ELECT. CAPACITOR CEAT101M35
C710 ELECT. CAPACITOR CEAT101M10
OTHERS C711 CKA (0.01µF/AC250V) ACG1005
CN981 CONNECTOR XKP3007
C712 CKA (0.01µF/AC250V) ACG1005
C713 ELECT. CAPACITOR CEAT101M2A
C714 ELECT. CAPACITOR CEAT101M2A
I POWER SUPPLY ASSY C715 ELECTROLYTIC CAPACITOR
(8200pF)
ACH7018

(1) CONTRAST TABLE

AWX7096 and AWX7194 are constructed the same except C716 ELECTROLYTIC CAPACITOR ACH7018
for the following : (8200pF)
C717 ELECT. CAPACITOR CEAT1R0M50
Part No. C718 ELECT. CAPACITOR CEAT1R0M50
Mark Symbol and Description Remarks C719 ELECT. CAPACITOR CEAT4R7M50
AWX7096 AWX7194
H707, H708 FUSE CLIP Not used AKR1004
C731 ELECT. CAPACITOR CEAT470M16
C732 ELECT. CAPACITOR CEAT470M16
C733 ELECT. CAPACITOR CEAT470M16
(2) PARTS LIST FOR AWX7096 C734 ELECT. CAPACITOR CEAT470M16
C739 ELECT. CAPACITOR CEAT100M50
SEMICONDUCTORS
IC701 REGULATOR IC NJM78M56FA
IC711 OP-AMP IC NJM4558D-D
IC712 OP-AMP IC NJM4558D-D
Q701 TRANSISTOR KRC101M
Q711 POWER MOS FET IRF9540A

35
VSX-D458

Mark No. Description Parts No. Mark No. Description Parts No.

RESISTORS CAPACITORS
R703 CARBON FILM RESISTOR RD1/2PM270J C901 ELECT. CAPACITOR CEAT4R7M50
R704 RESISTOR (2.2MΩ/ 1/2W) RCN1080 C902 ELECT. CAPACITOR CEAT4R7M50
R705 METAL OXIDE RESISTOR RS3LMF472J C903 ELECT. CAPACITOR CEAT4R7M50
R711 CARBON FILM RESISTOR RD1/4PMF101J C904 CERAMIC CAPACITOR CCCSL470J50
R712 CARBON FILM RESISTOR RD1/4PMF101J C905 CERAMIC CAPACITOR CCCSL470J50

Other Resistors RD1/4PU&&&J C906 CERAMIC CAPACITOR CCCSL470J50

C907 CERAMIC CAPACITOR CGCYX473M16
C908 CERAMIC CAPACITOR CGCYX473M16
OTHERS C909 ELECT. CAPACITOR CEAT470M10
703 AC SOCKET 1-P AKP1060 C910 ELECT. CAPACITOR CEAT470M10
711 CABLE HOLDER (11P) 51052-1100
712 5P CABLE HOLDER 51048-0500 C911 CERAMIC CAPACITOR CGCYX473M16
713 CABLE HOLDER (6P) 51052-0600 C931 CERAMIC CAPACITOR CGCYX103M16
CN714 11P SOCKET KP250NA11

CN715 13P PLUG KM200TA13 RESISTORS

H701 FUSE CLIP AKR1004 R907 CARBON FILM RESISTOR RD1/2PM151J
H702 FUSE CLIP AKR1004 R908 CARBON FILM RESISTOR RD1/2PM151J
H703 FUSE CLIP AKR1004 Other Resistors RD1/4PU&&&J
H704 FUSE CLIP AKR1004

J15 JUMPER WIRE DYY06-150-2651

OTHERS
KN704 EARTH METAL FITTING VNF1084 901 2P RCA PINJACK AKB7017
CN901 22P CONNECTOR 52045-2245
CN902 CONNECTOR 52045-1245
JA902 PIN JACK(4P)YELLOW AKB7099
J PRIMARY ASSY JA931 JACK RKN1004

PRIMARY assembly has no service part.

M VOLUME ASSY
K TRANS ASSY SEMICONDUCTORS
IC801 IC UPC4570C
SEMICONDUCTORS IC802 IC UPC4570C
IC951 PROTECTOR (3.5A) AEK7017 IC803 IC UPC4570C
IC952 PROTECTOR (3.5A) AEK7017 IC804 OP-AMP IC M5216P
D951 DIODE S5688G Q801 N-FET 2SK246
D952 DIODE S5688G
Q802 N-FET 2SK246
Q803 TRANSISTOR KRA103M
CAPACITORS Q804 TRANSISTOR KRC103M
C951 ELECT. CAPACITOR CEAT101M50 Q805 TRANSISTOR 2SA1115
C952 ELECT. CAPACITOR CEAT101M50 Q806 TRANSISTOR 2SC2603

RESISTORS Q807 TRANSISTOR 2SA1115

All Resistors RD1/4PU&&&J Q808 TRANSISTOR 2SC2603
D801 DIODE 1SS254
D802 DIODE 1SS254
OTHERS
951 CABLE HOLDER (11P) 51052-1100
952 5P CABLE HOLDER 51048-0500
CAPACITORS
C801 CERAMIC CAPACITOR CKCYB561K50
C802 CERAMIC CAPACITOR CKCYB561K50
C803 FILM CAPACITOR CFTLA104J50
L VIDEO ASSY C804
C805
FILM CAPACITOR
ELECT. CAPACITOR
CFTLA104J50
CEAT4R7M50
SEMICONDUCTORS
IC901 VIDEO SW IC NJM2296D C806 ELECT. CAPACITOR CEAT4R7M50
Q901 TRANSISTOR 2SC1740S C807 AXIAL CAPACITOR CKPUYB561K50
Q902 TRANSISTOR 2SA933S C808 AXIAL CAPACITOR CKPUYB561K50
Q931 TRANSISTOR 2SA933S C809 ELECT. CAPACITOR CEAT4R7M50
Q932 TRANSISTOR KRC103M C810 ELECT. CAPACITOR CEAT4R7M50

D901 ZENER DIODE MTZJ5.6B C811 CERAMIC CAPACITOR CGCYX104M16

D902 ZENER DIODE MTZJ5.6B C812 CERAMIC CAPACITOR CGCYX104M16
D932 DIODE 1SS254 C813 ELECT. CAPACITOR CEAT4R7M50
D933 DIODE 1SS254 C814 ELECT. CAPACITOR CEAT4R7M50
C815 AXIAL CAPACITOR CKPUYB681K50

36
 VSX-D458

Mark No. Description Parts No. Mark No. Description Parts No.
C816 AXIAL CAPACITOR CKPUYB681K50
C817 ELECT. CAPACITOR CEAT4R7M50
C818 ELECT. CAPACITOR CEAT4R7M50
C819 CERAMIC CAPACITOR CGCYX104M16
C820 CERAMIC CAPACITOR CGCYX104M16

C821 ELECT. CAPACITOR CEAT4R7M50

C822 ELECT. CAPACITOR CEAT4R7M50
C823 AXIAL CAPACITOR CKPUYB821K50
C824 AXIAL CAPACITOR CKPUYB681K50
C825 ELECT. CAPACITOR CEAT4R7M50

C826 ELECT. CAPACITOR CEAT4R7M50

C827 CERAMIC CAPACITOR CGCYX104M16
C828 CERAMIC CAPACITOR CGCYX104M16
C829 ELECT. CAPACITOR CEANP100M50
C830 ELECT. CAPACITOR CEAT221M10

C831 ELECT. CAPACITOR CEAT4R7M50

C832 ELECT. CAPACITOR CEAT4R7M50
C833 CERAMIC CAPACITOR CKPUYB151K50
C834 CERAMIC CAPACITOR CKPUYB151K50
C835 ELECT. CAPACITOR CEAT101M16

C836 ELECT. CAPACITOR CEAT101M16

C837 CERAMIC CAPACITOR CGCYX104M16
C838 CERAMIC CAPACITOR CGCYX104M16
C839 CERAMIC CAPACITOR CGCYX104M16
C840 CERAMIC CAPACITOR CGCYX473M16

C841 CERAMIC CAPACITOR CKPUYY103M16

C842 CERAMIC CAPACITOR CKPUYY103M16

RESISTORS
VR801 VARIABLE RESISTOR ACX7033
(50KΩ)
Other Resistors RD1/4PU&&&J

OTHERS
CN801 11P SOCKET KP200TA11L
CN802 12P SOCKET KP200TA12L
CN803 CONNECTOR 52045-0745

37
VSX-D458

6. ADJUSTMENT
There is no information to be shown in this chapter.

7. GENERAL INFORMATION
7.1 PARTS
7.1.1 IC
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.

AK7712A-VQ (INPUT ASSY : IC251)

• 24-bit DSP with AD/DA

• Block Diagram
XTI XTO
28 29

XTI XTO
CLKO 24 CLKO
LRCK 23 LRCK Divider
BCLK 22 BCLK AD/DA
DSPCLK CLK

A0-A16 43-50,
53-61 A0-A16 MCLK MCLK AINL+ 94 AINL+
IO0-IO7 63-70 IO0-IO7 BCLK AINL− 93 AINL−
RASCE 41 RASCE LRCK AINR+ 92 AINR+
CASRF 40 CASRF BCLK SDATA AINR− 91 AINR−
WE 42 WE LRCK VREFH 99 VRADH
ADC
OE 62 OE DSP VREFL 96 VRADL
SDIN2
SI 36 SI SDIN1
SO 39 SO SDOUT2
SCLK 35 SCLK SDOUT3 80 DZF1
SDOUT1 DZF
WRDY 37 RDY SMODE MCLK AOUTL 85 AOUTL1
CS 31 CS BCLK AOUTR 84 AOUTR1
WRQ 32 RQ LRCK VREFH 89 VRDAH
DRDY 38 DRDY SDATA VREFL 86 VRDAL
DAC1
SMODE 21
SDOUT1 19
SDIN1 20
79 DZF2
DZF
MCLK AOUTL 83 AOUTL2
PD 7
BCLK AOUTR 82 AOUTR2
RST 8
LRCK VREFH
PDAD 5
SDATA VREFL
PDDA 6
DAC2
OPCL 4

95 VCOM

25,34, 26,33,
3,30 9-11 88,98 87,97 81,100 52,72,75 51,71,74 12,76,77
TSTI1,2 TSTIO1-3 AVDD AVSS AVB DVDD DVSS DVB

38
 VSX-D458

•Pin Function
No. Pin Name I/O Function No. Pin Name I/O Function
1 NC − Non connection 26 DVSS − Digital ground
2 NC − Non connection 27 NC − Non connection
Clock input Connect a crystal resonator
Test input 1
3 TSTI1 I 28 XTI I between this pin and XTO pin, or input
Use for L or open
external CMOS clock to XTI.
Crystal resonator output Connect a crystal
ADC and DAC connection selection
4 OPCL I 29 XTO O resonator between this pin and XTI pin. Set to
L: connect H: Disconnect
open when using external clock.
CLKO (pin 24) output control
5 PDAD I AD reset control 30 TSTI2 I
L or open: CLKO pin output, H: CLKO pin to L
6 PDDA I DA reset control 31 CS I Chip select input for microprocessor interface
Command register reset input for
7 PD I Power down 32 WRQ I
microprocessor interface
8 RST I Reset input (L: reset) 33 DVSS − Digital ground
9 TSTIO1 I/O Test input/output 1 Use for L or open. 34 DVDD − Digital power supply
Clock input for serial data input of
10 TSTIO2 I/O Test input/output 2 Use for L or open. 35 SCLK I
microprocessor interface
11 TSTIO3 I/O Test input/output 3 Use for L or open. 36 SI I Serial data input for microprocessor interface
Data writing ready output for microprocessor
12 DVB − Digital board power supply 37 WRDY O
interface It becomes Hi-Z with CS = H.
Serial data input 2 (OPCL: H) Output data ready output for microprocessor
13 SDIN2 I 38 DRDY O
Correspond to 16 or 20 bit by front close. interface
Serial data output 2 (OPCL: H)
Serial data output for microprocessor interface
14 SDAD O Correspond to 16 or 20 bit by front close and 39 SO O
It becomes Hi-Z with CS = H.
common setting with SDIN2.
Serial data output 3 (OPCL: H)
15 SDOUT2 O 40 CASRF O CAS/quasi-SRAM refresh for external DRAM
Correspond to 16 or 20 bit by front close.
Serial data input 3 (OPCL: H)
16 SDDA I Correspond to 16 or 20 bit by front close and 41 RASCE O RAS/quasi-SRAM-CE pin for external DRAM
common setting with SDOUT2.
Serial data input 4 (OPCL: H) Correspond to Write signal output for external SRAM/quasi-
17 SDDA2 I 42 WE O
20 bit by front close (16bit at BCLK:32fs). SRAM/DRAM
Serial data output 4 (OPCL: H) Correspond
18 SDOUT3 O 43 A16
to 20 bit by front close (16bit at BCLK:32fs).
Serial data output 1 (Correspond to 16 or 24
19 SDOUT1 O 44 A15
bit by front close and 16 bit by rear close.)
Serial data input 1 (Correspond to 16 or 24
20 SDIN1 I 45 A14
bit by front close and 16 bit by rear close.)
Interface clock selection
Address output for external RAM
Input/output setting of LRCK and BCLK clocks O
21 SMODE I 46 A13 (A16:MSB)
L: Slave mode (22 and 23 pins input)
H: Master mode (output)
22 BCLK I/O Clock input/output for serial data input 47 A12
23 LRCK I/O L/R channel discrimination signal input/output 4 8 A1 1
24 CLKO O Master clock output 49 A10
25 DVDD − Digital power supply 50 A9

39
VSX-D458

No. Pin Name I/O Function No. Pin Name I/O Function
51 DVSS − Digital ground 7 6 DV B − Digital board power supply
52 DVDD − Digital power supply 77 DVB − Digital board power supply
53 A8 78 NC − Non connection
54 A7 79 DZF2 O Zero input detection for DAC2
55 A6 80 DZF1 O Zero input detection for DAC1
56 A5 81 AVB − Analog board power supply
57 A4 Address output for external RAM 82 AOUTR2 O Analog output 2 of DAC2 R ch
O
(A0:LSB)
58 A3 83 AOUTL2 O Analog output 2 of DAC2 L ch
59 A2 84 AOUTR1 O Analog output 1 of DAC1 R ch
60 A1 85 AOUTL1 O Analog output 1 of DAC1 L ch
Reference voltage input of DAC section
61 A0 86 VRDAL I
Normally, connect to analog ground.
Output enable signal output for external
62 OE O 87 AVSS − Analog ground
SRAM/quasi-SRAM/DRAM
63 IO0 88 AVDD − Analog power supply
Reference voltage input of DAC section
Normally, connect to AVDD (pin 88) and
64 IO1 89 VRDAH I
connect two capacitors (0.1µF and 10µF)
between this pin and VRDAL.
65 IO2 90 NC − Non connection
66 IO3 I/O Data input/output for external RAM 91 AINR – I Analog inverting input of ADC R ch
67 IO4 92 AINR + I Analog non-inverting input of ADC R ch
68 IO5 93 AINL – I Analog inverting input of ADC L ch
69 IO6 94 AINL + I Analog non-inverting input of ADC L ch
Common voltage pin Connect two capacitors
70 IO7 95 VCOM O
(0.1µF and 10µF) with analog ground.
Reference voltage input of ADC section
71 DVSS − Digital ground 96 VRADL I
Normally, connect to analog ground.
72 DVDD − Digital power supply 9 7 AVS S − Analog ground
Zero point detection setting
73 DZFSET I 98 AVDD − Analog power supply
H: DZF output L: DZF output to L
Reference voltage input of ADC section
Normally, connect to AVDD (pin 98) and
74 DVSS − Digital ground 99 VRADH I
connect two capacitors (0.1µF and 10µF)
between this pin and VRADL.
75 DVDD − Digital power supply 100 AVB − Analog board power supply

40
 VSX-D458

AK4310-VM (INPUT ASSY : IC253)

• 16-bit 2ch ∆Σ SYSTEM D/A CONVERTER with ANALOG FILTER

• Block Diagram
DVDD DVSS AVDD AVSS
2 3 18 19

LRCK 10 Serial Input

BICK 8 17 VCOM
SDATA 9 Interface

8× ∆Σ
SCF 16 AOUTL
Interpolator Modulator
DZF 24
8× ∆Σ
SCF 15 AOUTR
Interpolator Modulator
PD 4
Clock Divider
RST 5

6 7 23 22
MCLK CKS VREFL VREFH

•Pin Function
No. Pin Name I/O Function No. Pin Name I/O Function
1 TST1 I Test pin (pull down) Connect to open or L. 13 NC
− Non connection
2 DVDD − Digital power supply pin 14 NC
3 DVSS − Digital ground pin 15 AOUTR O R ch analog output pin
4 PD I Power down pin 16 AOUTL O L ch analog output pin
5 RST I Reset pin 17 VCOM O Common voltage pin, AVDD/2
6 MCLK I Master clock input pin 18 AVDD − Analog power supply pin
Clock selection pin
7 CK S I 19 AVSS − Analog ground pin
L: CLK=256fs H: CLK=384fs
8 BICK I Serial bit clock pin 20 NC
− Non connection
9 SDATA I Serial data input pin 21 NC
10 LRCK I L/R clock pin 22 VREFH I "H" reference voltage input pin
11 N C 23 VREFL I "L" reference voltage input pin
− Non connection
12 NC 24 DZF O Zero input detection pin

41
VSX-D458

PAC007A (INPUT ASSY : IC301, IC302)

• 2ch AF POWER AMP

• Block Diagram
14 13

TR4 TR5 R17 R18 TR18 TR17

C3 C5
1 TR6 TR19 22
TR8 TR21
C1 R5 R14 C2
2 TR9 TR22 21
R2 R6 R15 R11
3 TR1 TR2 TR7 TR20 TR15 TR14 20
R3 R12
4 D2 D3 19
R4 R13
TR3 TR10 TR23 TR16
TR11 TR24
C4 R7 R16 C6
R1 D1 R10

TR12
9
R9
R8
TR13

5 7 8 10 11 12 15 16 6 17 18

PAC008A (INPUT ASSY : IC303)

• 1ch POWER AMP

• Block Diagram
15 7

TR1 TR2 R3
14
8 TR6 TR9
11 R7 TR10
1 TR3 TR4 C1 R9
R4
2 TR7 13
6 R5
4 D2
R8
R2
3 TR5 TR8 TR11
TR12
R1 D1 R6 R10
12
SUB
5 9 10

42
 VSX-D458

PD5442A (FL&UCOM ASSY : IC601)

• CONTROL MCU

• Pin Function
No. Pin Name Function Name I/O Function
1 P75/AN5 R/C RY O Turn on and off the transistor switch of RY for rear and center speakers
2 P74/AN4 V-SW 2 O
3 P73/AN3 V-SW 1 O
Control the VIDEO FUNCTION IC.
4 P72/AN2 V-SW 4 O
5 P71/AN1 V-SW 3 O
Turn on and off the transistor switch of LOUDNESS
6 P70/AN0 LOUDNESS O
ON: lights up "LOUDNESS" indicator DIRECT ON: forced OFF
7 P61/CNT0/CNT2 A-MUTE O Control the audio system mute
8 P60/CNT1 MR IN (ELITE) I MR in (Hi: 37)
9 P47/INT2 REMOCON I SR remote control input
10 RESET RESET I Reset input
11 P91/Xcout VOL. UP O Motor volume control L for VOL. UP
12 P90/Xcin VOL. DOWN O Motor volume control L for VOL. DOWN
13 Vss GND − Ground
14 Xin Oscillation I
Connect a 4.19MHz oscillator
15 Xout Oscillation O
16 Vcc +5V − +5V Power supply
17 P46/SCL1/T3OUT ———— − —————
18 P45/SDA1/T1OUT T-POWER O Turn on and off the transistor switch for power supply when Tuner function is selected
19 P44/PWM1 T-MUTE O Mute control of Tuner output
20 P43/BUZ01 STEREO I Input L when Tuner receives stereo broadcasting.
21 P42/INT3 TUNED I Input L when Tuner is TUNE state.
22 P41/INT1 DO (for TUNER) I Serial data input from the TUNER PLL IC
23 P40/INT0 AC WAKE UP I AC wake up input
P87/PWM0/FLD3- Control the PLL IC, A. FUNC IC, E. VOL IC and E.TONE IC with the clock of serial
24 CLOCK O
9 control.
25 P86/RTP1/FLD38 DA0 (fot TX. TC) O Control the PLL IC and A. FUNC IC with the data of serial control.
26 P85/RTP0/FLD37 PLL CE O Chip enable of serial control of TUNER PLL IC
27 P84/FLD36 DA3 (for E-VOL. 2) O Serial control data output of E. VOL (for rear, center and sub woofer) IC M62429 (X2)
28 Vee – VF − -VF (-45V)
29 P83/FLD35 DA2 (for E-VOL. 1) O Serial control data output of E. VOL (for rear, center and sub woofer) IC M62429 (X2)
30 P82/FLD34 DA1 (for E-TONE) I/O Serial control data input/output (by I2C bus) of E. TONE IC M62420
31 P81/FLD33 ST1 (for TC9273) O Serial control strobe of FUNCTION IC TC9273
32 P80/FLD32 ST2 (for TC9163) O Serial control strobe of FUNCTION IC (for 6ch IN) TC9163
33 P37/FLD31 Grid 1
34 P36/FLD30 Grid 2
35 P35/FLD29 Grid 3
36 P34/FLD28 Grid 4
37 P33/FLD27 Grid 5 O FL drive grid output
38 P32/FLD26 Grid 6
39 P31/FLD25 Grid 7
40 P30/FLD24 Grid 8
41 P17/FLD23 Grid 9

43
VSX-D458

No. Pin Name Function Name I/O Function

42 P16/FLD22 Seg. 1/KEY 1
43 P15/FLD21 Seg. 2/KEY 2
44 P14/FLD20 Seg. 3/KEY 3
45 P13/FLD19 Seg. 4/KEY 4
46 P12/FLD18 Seg. 5/KEY 5 FL drive segment output
O
47 P11/FLD17 Seg. 6/KEY 6 Key scan output

48 P10/FLD16 Seg. 7/KEY 7

49 P07/FLD15 Seg. 8/KEY 8
50 P06/FLD14 Seg. 9/KEY 9
51 P05/FLD13 Seg. 10/KEY 10
52 P04/FLD12 Seg. 11
53 P03/FLD11 Seg. 12
54 P02/FLD10 Seg. 13
55 P01/FLD9 Seg. 14 O FL drive segment output
56 P00/FLD8 Seg. 15
57 P27/FLD7 Seg. 16
58 P26/FLD6 Seg. 17
59 P25/FLD5 KEY IN 1
60 P24/FLD4 KEY IN 2 I Key scan input
61 P23/FLD3 KEY IN 3
62 P22/FLD2 ——— — − ————
63 P21/FLD1 ——— — − ————
64 P20/BUZ02/FLD0 ———— − ————
65 P57/Srdy2/Sclk22 ———— − ————
66 P56/Sclk21 Power down (DSP) O Power down state at L
67 P55/TxD Reset (DSP) O Reset the DSP
68 P54/RxD CS (DSP) O Outputs for reset the DSP command register
69 P53/Sclk12 REQ (DSP) O Chip select output of the DSP serial control
70 P52/Sclk11 Clock (DSP) O Clock output of the DSP serial control
71 P51/Sout1 Data out (DSP) O Data output of the DSP serial control
72 P50/Sin1 Data in (DSP) I Serial data output from the DSP
73 AVss GND − Ground
74 Vref 5V − Reference voltage
DC detector input of the protection circuit When Lo is input, Open the relay excepting
75 P65/Sstb1/AN11 DC DET I
AC relay. L : 8-figures of FL flash "POWEROFF".
Overload detector input of the protection circuit When Lo is input, Open the relay
76 P64/INT4/Sbusy1 AMP OL I
excepting AC relay. L : 8-figures of FL flash "OVERLOAD".
Turn on and off the transistor switch of relay for AC powe
77 P63/AN9 AC RY I
Stand by : L Power on : H
78 P62/Srdy1/AN8 FRONT RY O
Turn on and off the transistor switch of relay for the front speaker which connecting with
79 P77/AN7 SP-A RY O
series .
80 P76/AN6 SP-B RY O

44
 VSX-D458

NJM2296D (VIDEO ASSY : IC901)

• VIDEO SW IC

• Block Diagram
V+ SW2 SW1 SW5
16 10 14 2

Vin1 13
20k
S1
S5
Vin2 9 6.2dB 75Ω
Amp driver 1 Vout1
20k 20k
S2
Vin3 7
S6
20k 75Ω
6.2dB
S4 Amp driver 15 Vout2
Vin4 5 20k
20k
S3 S7
Vin5 3 6.2dB 75Ω
driver 11 Vout3
Amp
20k 20k

4 6 12 8
SW3 SW4 GND V−

45
VSX-D458

7.1.2 DISPLAY
7 AAV7054
FL Tube

Pin Assignment

Grid Assignment

46
 VSX-D458

Anode Connection

47
VSX-D458

7.2 DIAGNOSIS
How to Diagnose the P-PACK (IC301, IC302 AND IC303) (At Bottom Side)

1 Cut six portions on the Under Base by nipper 3 Turn the Cover.
and remove a Cover.
Front
A B

B A

4 Fix the Cover with the three screws

(BBZ30P080FMC) and stick the UL Caution Card
(AAX-313).

2 Diagnose the P-PACK (IC301, IC302 and IC303).

Front Front AAX - 313

IC302

22

IC303

15

IC301

22

CAUTION :
After performing the above operation, be sure to stick the UL caution card(Part No. : AAX-313) to the prescribed position.
(It is required by the UL regulations.)

48
 VSX-D458

7.3 BLOCK DIAGRAM

TUNER

IC102 IC141
PHONO MASTER POWER
TC9273N-007 TC9163AN
CD
VOL. AMP
LOUDNESS Section
VCR
DVD TONE &
Lch DSP Section
LD (Include PRO LOGIC) BALANCE
(IC) SP-A
Rch

SP-B
Cch
TAPE2 REC
VCR REC
S.WF.
TAPE2
CENT
SLch

SL
6ch CENT. SRch

6ch LFE
SR
6ch SL
6ch SR E. VOL × 2 SUB
PRE WOOFER
AMP OUT
CENTER
PREOUT

IC901
NJM2296D
VCR
DVD
LD
To
POWER AMP

VCR REC
POWER AMP DETECT
MONITOR1 OUTPUT
COMPARATOR
MONITOR2 VL

REGULATOR

FL
REMOTE KEY
CONTROL MICRO CONTROLLER
MATRIX
IN
STANDBY
POWER

FL

49
VSX-D458

8. PANEL FACILITIES AND SPECIFICATIONS

8.1 PANEL FACILITIES
Front panel
• The size of characters in the figure may different from that
on the actual product.
1 2 3 4 5 6 7 8 9 0 -

DOLBY SURROUND
AUDIO/VIDEO MULTI-CHANNEL RECEIVER N∫m¿Û¯.˘ P R O · L O G I C

STANDBY
Î
5-D DOLBY VIRTUAL DSP VCR/ TAPE 2
THEATER PRO LOGIC /SRS MODE TAPE 1 DVD/TV LD/SAT CD FM/AM PHONO MONITOR

DVD
DVD5.1CH
5.1CH

MASTER
STANDBY/ON VOLUME

LOUDNESS MUTING MPX MODE MEMORY CLASS

PHONES
SELECT – TONE +
TUNING – STATION +
SPEAKERS DIRECT SELECT
5-CHANNEL EQUAL POWER OUTPUT

L BALANCE R
– FREQUENCY + MIN MAX

= ~! @# $ % ^
1 (power) STANDBY/ON button @ DIRECT button
Use to play back sound without going through the tone
2 5-D THEATER button and balance control circuits. DOLBY PRO LOGIC, DSP
3 STANDBY indicator MODE, 5-D THEATER, DOLBY VIRTUAL/SRS and
LOUDNESS also turn off.
4 DOLBY PRO-LOGIC button
# MUTING button
5 VIRTUAL/SRS button Press to mute the volume.
6 DSP MODE button $ TUNING SELECT, STATION (–, +) and
7 Display FREQUENCY (–, +) buttons
8 MPX MODE button TUNING SELECT:
Use to select the STATION mode and FREQUENCY
Use to switch the auto stereo/monaural mode for
mode when operating the tuner.
receiving FM broadcasts.
STATION (–, +):
When the received broadcast signal is weak, press this
Use to select the station number when operating the
button to set the monaural mode.
tuner.
9 MEMORY button FREQUENCY (–, +):
0 CLASS button Use to select the frequency when operating the tuner.

- Function buttons % SELECT, TONE (–, +) and BALANCE (L, R)

buttons
= PHONES jack (Headphone terminal) SELECT:
~ LOUDNESS button Use to select the TONE (TREBLE, BASS) and BALANCE
Press this button when the volume is low to raise the control.
low and high range levels so that the sound can be heard 3 TREBLE control 3 BASS control
more easily. BALANCE control 2
TONE (–, +):
! SPEAKERS button Use to adjust tone.
Use to switch the A and B speaker systems. BALANCE (L, R):
Use to adjust volume balance.
^ MASTER VOLUME

50
 VSX-D458

Display

1 2 3 4 5 6 7 8 9 0

SP AB SRS VIRTUAL PRO LOGIC TAPE 2 MONO TUNED

DIRECT LOUD 5–D THEATER DSP MODE STEREO

1 DIRECT indicator 8 DSP MODE indicator

Lights when DIRECT is ON. Lights when DSP MODE is selected.

2 SP (Speaker) A, B indicator 9 TAPE 2 indicator

The indicator of the speaker system (A, B) selected will Lights when TAPE 2 MONITOR is ON.
light.
0 TUNER indicator
3 LOUD (Loudness) indicator MONO:
Lights when LOUDNESS is ON. Lights when the monaural mode is set using the MPX
MODE button.
4 SRS indicator STEREO:
Lights when SRS 1 or SRS 2 (one of the virtual surround Lights when stereo broadcasts are received during auto
mode) is selected. stereo mode.
TUNED:
5 VIRTUAL indicator Lights when broadcasts are being received.
Lights when DOLBY VIRTUAL is selected.
- CHARACTER display
6 5-D THEATER indicator
Lights in the 5-D THEATER mode.

7 PRO LOGIC indicator

Lights when Dolby Pro Logic is selected.

51
VSX-D458

When connecting or changing equipment, be sure to turn OFF

CONNECTING DEVICES the POWER switch, and disconnect the power cord from the
wall outlet.

7 For better reception of signals, 7 When AM broadcast reception is poor

use an FM external antenna. Connect a 5 to 6 meter long vinyl-coated wire to the AM antenna. If possible,
draw horizontally outdoors to achieve better reception.
ANTENNA

AM AM outdoor antenna
LOOP
ANTENNA

AM indoor antenna
(Vinyl-coated wire) ANTENNA

AM
FM
UNBAL
75Ω
5 to 6 m LOOP
ANTENNA

Don't detach the AM GND

75 Ω coaxial cable
loop antenna. FM
UNBAL
75Ω

Stretch out the antenna fully and se- PIONEER projection TV

* Can also be
cure onto the wall using pins. (Center channel)
connected to a
cassette deck.

7 Assembling the AM TV monitor

FM antenna
loop antenna
SIGNAL GND is VCR
used to decrease VCR
the noises when an VIDEO AUDIO/
VIDEO AUDIO/
analog player, etc. IN VIDEO L-AUDIO
OUT (MONO)
is connected. This IN
is not a ground for
safety. DVD 5.1CH
ANTENNA INPUT
SURROUND CENTER CENTER
L PRE OUT
AM
LOOP
ANTENNA

VIDEO OUT
TO MONITOR TV
1 2 SURROUND SUB PRE OUT
R WOOFER SUB
WOOFER

7 When attached onto a FM

UNBAL
CONTROL
OUT
75Ω
wall, etc. VIDEO

IN IN IN IN IN OUT IN OUT
Turntable
L

R
DVD/ PLAY REC PLAY REC
PHONO CD TV LD/ VCR/TAPE1 TAPE2 MONITOR
DVD 5.1CH SAT
FRONT
SIGNAL GND
CD player OUTPUT
PLAY
CD OUTPUT
VIDEO
OUT AUDIO OUT REC INPUT
VIDEO
OUT
Sub woofer with
L
built-in amplifier
AUDIO
DVD player OUT LD player Cassete deck * The sub woofer can be
* Can also be connected in a different
Face towards the direction with the connected to a way. For details, refer to
best reception. satellite system. the instructions on the
sub woofer.

52
 VSX-D458

7 Antenna terminal 7 Input/output plug 7 Speaker terminal

VID

○
EO

○
○
L L 10 mm

○
10 mm
1

○
○
3

○
1 R R

○
○
ª

○
2

○
2

○
3 ·

○
Connect the white plug to L, red plug to R, and yellow plug to
VIDEO. Be sure to insert completely.

÷ The size of characters and terminal positions in the figures may differ from those on the actual product.

AC OUTLET
Speaker system Speaker system
[SWITCHED 100 W (0.8 A) MAX]
(Center) (Surround) Power supplied through this outlet is
C R L turned on and off by the receiver’s
POWER switch. Total electrical power
consumption of connected equipment
should not exceed 100 W (0.8 A).

9 ( 9 ( 9 (
¶ This unit should be disconnected by
removing the power plug from the wall
socket when not in regular use, e.g.,
R L when on vacation.
¶ Do not connect appliances with high
power consumption such as heaters,
CAUTION: SPEAKER IMPEDANCE
8Ω ~16Ω/SPEAKER
ATTENTION: IMPEDANCE DE HAUT-PARLEURS
irons, or television sets to this AC
R L
8Ω ~16Ω/HAUT - PARLEUR
OUTLET in order to avoid overheating
CENTER SURROUND and fire risk. This can also cause the
SPEAKER SPEAKERS
receiver to malfunction.
R L AC 120V 60Hz
CAUTION:
A A DO NOT CONNECT A MONITOR
CAUTION:SEE INSTRUCTION MANUAL CAUTION:
8 ~16Ω / SPEAKER
DO NOT CONNECT
TV SET OR MONITOR.
OR TV SET TO THIS UNIT’S AC
B ATTENTION: 8 ~16Ω / HAUT-PARLEUR
B SE REPORTER AU ATTENTION: OUTLET.
MODE D'EMPLOI
R L 6 ~LESS THAN 8Ω / SPEAKER
NE RELIEZ PAS
A L'APPAREIL
SWITCHED
100W MAX
FRONT SPEAKERS 6 ~MOINS DE 8Ω / HAUT-PARLEUR DE TELEVISION 0.8A MAX
IMPEDANCE OU AU MONITEUR.
SELECTOR AC OUTLET

9 ( 9 (
Use speakers with nominal imped-
ance of 6 Ω to 8 Ω or 8 Ω to 16 Ω.
÷ When using speakers with imped-
ance of 6 Ω or more and less than
8 Ω, set the IMPEDANCE
R SELECTOR to the “6 ~ LESS
L
THAN 8 Ω” position.
Speaker system (Front) ÷ When using 8 Ω to 16 Ω, set the
IMPEDANCE SELECTOR to “8 ~
16 Ω” position.

53
VSX-D458

Remote control unit

8 FUNC. button
Switches the function.

9 PRESET RECALL indicator

PRESET

MULTI
RECALL

9 0 [Tuner Operations]
CONTROL
CD STANDBY/ON
CHANNEL
STATION (power) STANDBY/ON, STATION –/+, BAND, FREQ
–/+, MPX, CLASS, D.ACCESS and number buttons
TV FUNC. TV VOL.
TAPE BAND FREQ.
[TV Operations]
DVD MPX CLASS D.ACCESS
(power) STANDBY/ON, CHANNEL –/+, TV FUNC.,
TV VOL. –/+ and number buttons
1 LD
SW LEVEL

[CD Operations]
VCR
1
5.1CH
2
REAR
R. LEVEL
3
0 (power) STANDBY/ON, 4, ¢, 1, ¡, 8, 7, 3,
4 5 6 DISC, +10 and number buttons
TEST REAR
TV TONE

7 8
L. LEVEL

9
[CASSETTE DECK Operations]
(power) STANDBY/ON, 2, 1, ¡, 8, 7 and 3
2 TUNER
CENTER
MODE

0 +10
CENTER
LEVEL

DISC buttons
3 SURROUND
DELAY TIME
PRO LOGIC
EFFECT
DSP MODE MUTING
- [DVD and LD Operations]
4 PRESET VIRTUAL
5-D
THEATER
= (power) STANDBY/ON, 4, ¢, 1, ¡, 8, 7, 3,
DISC, +10 and number buttons
5 ~
RECEIVER
STANDBY/ON FUNC. DIRECT
MASTER
VOLUME
[VCR Operations]
6 (power) STANDBY/ON, CHANNEL –/+, 1, ¡, 8,
Î ! 7 and 3 buttons
7 AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
@ [When setting surround (operations)]
8 5.1 CH: Use to turn ON/OFF the 5.1 CH INPUT mode.
TEST TONE: When turned ON (while in surround mode),
volume balance adjustment signals are output in order
from the speakers and can be adjusted.
CENTER MODE: Switches the center mode (only when
setting the Dolby Pro Logic).
DELAY TIME: Use to set the delay time (only when
setting the Dolby Pro Logic).
1 MULTI CONTROL function buttons SW LEVEL –/+: Adjusts the sub woofer level.
Use to set and operate the MULTI CONTROL. REAR R. LEVEL –/+: Adjusts the rear level (R channel).
REAR L. LEVEL –/+: Adjusts the rear level (L channel).
CENTER LEVEL –/+: Adjusts the center level.
2 TUNER button EFFECT –/+: Adjusts DSP effects.
Use to set the TUNER function.
- MUTING button
3 SURROUND button Press to mute the volume.
Press when performing surround operations.
= DSP MODE button
4 PRO LOGIC button Switches the surround effects.
Use to turn ON/OFF the DOLBY PRO LOGIC surround.
~ MASTER VOLUME –/+ buttons
5 PRESET button Use to adjust the volume.
To preset other brand devices, press any one of the
MULTI CONTROL function buttons together with this
button.
! DIRECT button
Use to play back sound without going through the tone
and balance control circuits. DOLBY PRO LOGIC, DSP
6 VIRTUAL button MODE, 5-D THEATER, DOLBY VIRTUAL/SRS and
Use to switch the VIRTUAL/SRS mode. LOUDNESS also turn off.

7 RECEIVER (power) STANDBY/ON button @ 5-D THEATER button

Use to switch the RECEIVER power to ON or STANDBY. Use to turn ON/OFF the 5-D THEATER mode.

54
 VSX-D458

8.2 SPECIFICATIONS
Amplifier section FM Tuner Section
Continuous average power output of 100 Frequency Range ......................................... 87.5 MHz to 108 MHz
Usable Sensitivity ....................... Mono:13.2 dBf, IHF (1.3 µV/75 Ω)
watts* per channel, min., at 8 ohms, from 20 50 dB Quieting Sensitivity ....................................... Mono: 20.2 dBf
Hz to 20,000 Hz with no more than 0.09 %** Stereo: 38.6 dBf
total harmonic distortion (front). Signal-to-Noise Ratio ................................ Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Continuous Power Output Distortion ....................................................... Stereo: 0.5 % (1 kHz)
Front ...................................... 100 W + 100 W (1kHz, 0.8 %, 8 Ω) Alternate Channel Selectivity ................................. 60 dB (400 kHz)
Center ................................................... 100 W (1kHz, 0.8 %, 8 Ω) Stereo Separation ...................................................... 40 dB (1 kHz)
Rear ....................................... 100 W + 100 W (1kHz, 0.8 %, 8 Ω) Frequency Response ................................ 30 Hz to 15 kHz (±1) dB
Antenna Input ....................................................... 75 Ω unbalanced
Input (Sensitivity/Impedance)
PHONO MM ............................................................ 2.8 mV/47 kΩ
AM Tuner Section
LD/SAT, CD, VCR/TAPE 1, TAPE 2
Frequency Range ......................................... 530 kHz to 1,700 kHz
DVD/TV .................................................................. 200 mV/47 kΩ
Sensitivity (IHF, Loop antenna) ........................................ 350 µV/m
Phono Overload level (T.H.D. 0.1 %, 1kHz)
Selectivity ............................................................................... 25 dB
PHONO MM ..................................................................... 100 mV
Signal-to-Noise Ratio ............................................................. 50 dB
Frequency Response
Antenna ...................................................................... Loop antenna
PHONO MM .................................... 20 Hz to 20,000 Hz ± 0.3 dB
LD/SAT, CD, VCR/TAPE 1, TAPE 2
DVD/TV ................................................. 5 Hz to 100,000 Hz –3 dB
+0 Miscellaneous
Output (Level/Impedance) Power Requirements ............................................ AC 120 V, 60 Hz
VCR/TAPE 1 REC, TAPE 2 REC .......................... 200 mV/2.2 kΩ Power Consumption .............................................................. 280 W
Tone Control Power consumption in standby mode ................................... 2.5 W
BASS ................................................................... ± 8 dB (100 Hz) AC Outlet
TREBLE ............................................................... ± 8 dB (10 kHz) SWITCHED ................................................. 100 W (0.8 A) MAX
LOUDNESS .................................. + 7 dB/+ 6 dB (100 Hz/10 kHz) Dimensions .................................. 420 (W) × 158 (H) × 374 (D) mm
Signal-to-Noise Ratio (IHF, short circuited, A network) Weight (without package) ....................................................... 9.0 kg
PHONO MM ........................................................................ 72 dB
LD/SAT, CD, VCR/TAPE 1, TAPE 2, DVD/TV ..................... 96 dB Furnished Parts
Signal-to Noise Ratio [EIA, at 1 W (1 kHz)] FM Antenna .................................................................................... 1
PHONO MM ........................................................................ 75 dB AM Loop Antenna .......................................................................... 1
LD/SAT, CD, VCR/TAPE 1, TAPE 2, DVD/TV ..................... 79 dB Dry Cell Batteries [size "AA" (IEC R6P)] ........................................ 2
Remote Control Unit ...................................................................... 1
* Measured pursuant to the Federal Trade Commission's Trade Operating Instructions .................................................................... 1
Regulation rule on Power Output Claims for Amplifier. Warranty card ................................................................................. 1
** Measured by Audio Spectrum Analyzer.
NOTE:
VIDEO Section Specifications and the design are subject to possible modifications
Input (Sensitivity/Impedance) without notice, due to improvements.
VCR, DVD/TV, LD/SAT .............................................. 1 Vp-p/75 Ω
Output (Level/Impedance)
VCR REC, MONITOR TV .......................................... 1 Vp-p/75 Ω
Frequency Response PRESET
RECALL

LD/SAT, VCR, DVD/TV MULTI

FM antenna : ADH7004
+0 CONTROL

= MONITOR ................................................ 5 Hz to 7 MHz –3 dB

CHANNEL
CD STANDBY/ON STATION

Signal-to-Noise Ratio ............................................................. 55 dB TAPE

TV FUNC.
BAND
TV VOL.
FREQ.

Cross Talk .............................................................................. 55 dB DVD MPX CLASS D.ACCESS

SW LEVEL
LD

1 2 3
5.1CH REAR
VCR R. LEVEL

4 5 6
TEST REAR
TV TONE L. LEVEL

Manufactured under license from the Dolby Laboratories Licensing 7 8 9

CENTER CENTER

Corporation. “DOLBY”, the double-D symbol and “PRO LOGIC” TUNER MODE

0 +10
LEVEL

DISC

are trademarks of Dolby Laboratories Licensing Corporation. SURROUND

DELAY TIME
PRO LOGIC
EFFECT
DSP MODE MUTING
AM loop antenna : ATB7009
5-D
PRESET VIRTUAL THEATER

RECEIVER MASTER
STANDBY/ON FUNC. DIRECT VOLUME

"DTS" is a tradmark of Digital Theater System, Inc.

Î
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT

The words “TRUSURROUND”, “SRS”, “Sound Retrieval System”

and SRS symbol are trademarks of SRS Labs, Inc. Made
under license from SRS Labs, Inc. Patented in the USA and
selected countries. Purchase of this product does not convey the Dry cell battery
right to sell recordings made with the Sound Retrieval System. Remote control unit : (size “AA” IEC R6P) × 2
AXD7207 (CU-VSX153)

55