Service

Manual DEH-P3500MP/XM/EW
ORDER NO.
CRT3020
MULTI-CD CONTROL HIGH POWER CD/MP3 PLAYER WITH RDS TUNER

DEH-P3500MP XM/EW

- This service manual should be used together with the following manual(s):
Model No. Order No. Mech. Module Remarks
CX-3057 CRT3026 S10MP3 CD Mech. Module:Circuit Description, Mech.Description, Disassembly

For details, refer to "Important symbols for good services".

PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A.
PIONEER EUROPE NV Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936

C PIONEER CORPORATION 2003 K-ZZY. JAN. 2003 Printed in Japan

 1 2 3 4

SAFETY INFORMATION

A
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely
repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.

1. Safety Precautions for those who Service this Unit.

• When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable
results.

B Caution:
1. During repair or tests, minimum distance of 13cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.

2. A “CLASS 1 LASER PRODUCT” label is affixed to the 3. The triangular label is attached to the mechanism
bottom of the player. unit frame.

C
CLASS 1
LASER PRODUCT

4. Specifications of Laser Diode

Specifications of laser radiation fields to which human access is possible during service.
Wavelength = 800 nanometers

2 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

A
[ Important symbols for good services ]
In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them:
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.

2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.
B
3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.

4. Shipping mode and shipping screws

To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.

5. Lubricants, glues, and replacement parts

Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying C
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used.

DEH-P3500MP/XM/EW 3
5 6 7 8
 1 2 3 4

A CONTENTS
SAFETY INFORMATION ............................................................................................................................................2
1. SPECIFICATIONS .......................................................................................................................................................5
2. EXPLODED VIEWS AND PARTS LIST.......................................................................................................................6
2.1 PACKING...............................................................................................................................................................6
2.2 EXTERIOR.............................................................................................................................................................8
2.3 CD MECHANISM MODULE ...............................................................................................................................10
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...................................................................................................12
3.1 BLOCK DIAGRAM ..............................................................................................................................................12
B
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE) ........................................................................................14
3.3 KEYBOARD UNIT ...............................................................................................................................................20
3.4 CD MECHANISM MODULE ...............................................................................................................................22
4. PCB CONNECTION DIAGRAM ................................................................................................................................32
4.1 TUNER AMP UNIT .............................................................................................................................................32
4.2 PANEL UNIT .......................................................................................................................................................36
4.3 KEYBOARD UNIT ...............................................................................................................................................37
4.4 CD MECHANISM MODULE ...............................................................................................................................38
5. ELECTRICAL PARTS LIST ........................................................................................................................................40
6. ADJUSTMENT .........................................................................................................................................................45
C 6.1 JIG CONNECTION DIAGRAM ...........................................................................................................................45
6.2 CD ADJUSTMENT .............................................................................................................................................46
6.3 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT................................................................48
6.4 ERROR MODE ....................................................................................................................................................50
7. GENERAL INFORMATION .......................................................................................................................................51
7.1 DIAGNOSIS ........................................................................................................................................................51
7.1.1 DISASSEMBLY ..............................................................................................................................................51
7.1.2 CONNECTOR FUNCTION DESCRIPTION ....................................................................................................53
7.2 PARTS .................................................................................................................................................................54
D 7.2.1 IC ....................................................................................................................................................................54
7.2.2 DISPLAY.........................................................................................................................................................63
7.3 OPERATIONAL FLOW CHART...........................................................................................................................64
7.4 CLEANING ..........................................................................................................................................................65
8. OPERATIONS ...........................................................................................................................................................66

- CD Player Service Precautions

1. Before disassembling the unit, be sure to turn off the 3. After replacing the pickup unit, be sure to check the
power. Unplugging and plugging the connectors dur- grating.(See p.48.)
ing power-on mode may damage the ICs inside the
unit.
2. To protect the pickup unit from electrostatic dis-
charge during serviving, take an appropriate treat-
F
ment(shorting-solder) by referring to "the DISAS-
SEMBLY" on page 51.

4 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

1. SPECIFICATIONS
A

DEH-P3500MP/XM/EW 5
5 6 7 8
 1 2 3 4

A 2. EXPLODED VIEWS AND PARTS LIST

2.1 PACKING

6 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

NOTE:
A
- Parts marked by “*” are generally unavailable because they are not in our Master Spare Parts List.
- Screws adjacent to ∇ mark on the product are used for disassembly.
- For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)

- PACKING SECTION PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
1 Cord Assy CDE7059 16 •••••
2 Accessory Assy CEA3376 17 Carton CHG4951 B
3 Spring CBH1650 18 Contain Box CHL4951
4 Screw Assy CEA3445 19 Protector CHP2663
5 Fixing Screw BPZ20P060FZK 20 Protector CHP2664

6 Screw CBA1002 21-1 Owner’s Manual CRD3672

* 7 Polyethylene Bag CEG-127 21-2 Owner’s Manual CRD3673
8 Screw CRZ50P090FTC 21-3 Owner’s Manual CRD3674
9 Screw TRZ50P080FTC 21-4 Installation Manual CRD3675
* 10 Polyethylene Bag CEG-158 * 21-5 Passport CRY1013

11 Handle CNC5395 * 21-6 Warranty Card CRY1157

12 Holder CND1249 22 Case Assy CXB3520
13 Holder CND1250 C
14 Bush CNV3930
15 Polyethylene Bag CEG-162

- Owner's Manual, Installation Manual

Part No. Language
CRD3672 English, Spanish
CRD3673 German, French
CRD3674 Italian, Dutch
CRD3675 English, Spanish, German, French, Italian, Dutch D

DEH-P3500MP/XM/EW 7
5 6 7 8
 1 2 3 4

2.2 EXTERIOR

8 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

- EXTERIOR SECTION PARTS LIST

A
Mark No. Description Part No. Mark No. Description Part No.
1 Screw BMZ30P040FZK 46 Panel CNS7245
2 Screw BSZ26P060FTC 47 Gear CNV5997
3 Screw BSZ30P060FTC 48 Pin CNV6486
4 Screw BSZ30P200FTC 49 Lighting Conductor CNV6487
5 Cord Assy CDE7059 50 Arm CNV7400

6 Cap CKX-003 51 Arm CNV7401

7 Cable CDE7188 52 Arm CNV7402
8 CD Mechanism Module(S10MP3) CXK5660 53 Arm CNV7403
9 Case CNB2870 54 Panel Unit CWM8758 B
10 Earth Plate CNC8915 55 Socket(CN1950) CKS3550

11 Cushion CNM4870 56 Connector(CN1951) CKS4462

12 Insulator CNM7935 57 Holder Unit CXB9501
13 Insulator CNM8174 58 Holder Unit CXB9502
14 Panel CNS6934 59 Damper Unit CXB9503
15 Tuner Amp Unit CWM8652 60 Service Panel Unit CXX1691

16 Screw ASZ26P060FTC 61 Screw IMS20P045FZK

17 Screw BPZ26P080FTC 62 Detach Grille Assy CXB9592
18 Screw BSZ26P160FTC 63 Screw BPZ20P100FZK
19 Fuse(10A) CEK1208 64 Button(CLK, EQ) CAC7778 C
20 FM/AM Tuner Unit CWE1645 65 Button(DISP) CAC7779

21 Holder CND1054 66 Button(PAUSE) CAC7780

22 Pin Jack(CN351) CKB1051 67 Button(AUDIO) CAC7781
23 Plug(CN981) CKM1376 68 Button(OPEN) CAC7782
24 Connector(CN101) CKS3408 69 Button(VOLUME) CAC7809
25 Plug(CN831) CKS3537 70 Button(SELECT) CAC7811

26 Connector(CN721) CKS3837 71 Button(SRC) CAC7785

27 Connector(CN801) CKS4124 72 Button(FUNC) CAC7786
28 Antenna Jack(CN401) CKX1056 73 Button(1-6) CAC7787
D
29 Holder CND1325 74 Spring CBH2630
30 Holder CND1352 75 Cover CNS7269

31 Insulator CNM8245 76 Lighting Conductor CNV7421

32 Heat Sink CNR1668 77 Rubber CNV7422
33 Terminal(CN402) VNF1084 78 Keyboard Unit CWM8632
34 Holder Unit CXB6681 79 LCD(LCD1901) CAW1757
35 Chassis Unit CXB9635 80 Connector(CN1901) CKS4524

36 Button(EJECT) CAC7752 81 Holder CNC9757

37 Screw(M2x2) CBA1176 82 Sheet CNM7647
38 Washer CBF1038 83 Connector CNV6440 E
39 Spring CBH2650 84 Lighting Conductor CNV7710
40 Spring CBH2651 85 Grille Unit CXB9620

41 Spring CBH2652 86 Screw ISS26P055FTC

42 Spring CBH2653 87 Choke Coil(L981) CTH1280
43 Spring CBL1512 88 Transistor(Q752, 901, 911) 2SD2375
44 Holder CND1254 89 IC(IC301) PAL007A
45 Cover CNM6854

DEH-P3500MP/XM/EW 9
5 6 7 8
 1 2 3 4

2.3 CD MECHANISM MODULE

B 1

2
1
C
2
1

2 1

1
2

D 1
3
1
2
2

1 1

1
1
1GEM1024
2GEM1045
3GEM1035
E

10 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

- CD MECHANISM MODULE SECTION PARTS LIST

A

Mark No. Description Part No. Mark No. Description Part No.
1 CD Core Unit(S10MP3) CWX2742 46 Rack CNV7199
2 Connector(CN101) CKS4182 47 Holder CNV7201
3 Connector(CN901) CKS4017 48 Holder CNV7202
4 Screw BMZ20P035FTC 49 Arm CNV7203
5 Screw BSZ20P040FTC 50 Gear CNV7207

6 Screw(M2x4) CBA1362 51 Gear CNV7208

7 Screw(M2x3) CBA1511 52 Gear CNV7209
8 Screw(M2x3) CBA1527 53 Gear CNV7210 B
9 Washer CBF1037 54 Gear CNV7211
10 Washer CBF1038 55 Gear CNV7212

11 Washer CBF1060 56 Rack CNV7214

12 Spring CBH2390 57 Arm CNV7215
13 Spring CBH2606 58 Arm CNV7216
14 Spring CBH2607 59 Guide CNV7217
15 Spring CBH2608 60 Roller CNV7218

16 Spring CBH2609 61 Gear CNV7219

17 Spring CBH2610 62 Arm CNV7221
18 Spring CBH2611 63 Arm CNV7220 C
19 Spring CBH2612 64 Arm CNV7222
20 Spring CBH2613 65 Damper CNV7313

21 Spring CBH2614 66 Damper CNV7314

22 Spring CBH2615 67 Arm CNV7341
23 Spring CBH2616 68 Arm CNV7342
24 Spring CBH2617 69 Guide CNV7360
25 Spring CBH2620 70 Guide CNV7361

26 Spring CBH2621 71 Holder CNV7437

27 Spring CBH2641 72 Arm CNV7444 D
28 Spring CBH2642 73 Gear CNV7595
29 Spring CBH2643 74 Damper CNV7618
30 Spring CBH2659 75 Motor Unit(M1) CXB6007

31 Spring CBH2688 76 Chassis Unit CXB8728

* 32 Spring CBL1614 77 Screw Unit CXB8729
33 Shaft CLA3845 78 Gear Unit CXB8731
34 Frame CNC9962 79 Arm Unit CXB8732
35 Frame CNC9963 80 Arm Unit CXB8735

36 Bracket CNC9966 81 Arm Unit CXB8852

37 Bracket CNC9967 82 Motor Unit(M2) CXB8933 E
38 Arm CNC9968 83 Bracket CNC9985
39 Arm CNC9973 84 Screw JFZ20P020FTC
40 Lever CNC9983 85 Screw(M2x5) EBA1028

41 Lever CNC9984 86 Screw JFZ20P020FTC

42 Sheet CNM8134 87 Screw JGZ17P022FTC
43 Collar CNV6906 88 Washer YE15FTC
44 Guide CNV6925 89 Washer YE20FTC
45 Arm CNV7198 90 Pickup Unit(Service)(P10) CXX1641

91 Screw IMS26P030FMC
F

DEH-P3500MP/XM/EW 11
5 6 7 8
 1 2 3 4

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM

3.1 BLOCK DIAGRAM
A A TUNER AMP UNIT
VDD

7 6 13 5 10 9 8 11 14 18 19 20 21
FM/AM TUNER UNIT

WC
CE2

ROM_VDD

SL

DI
CK
CE1

LDET

DO

RDS_CK

RDS_DATA

RDS_LOCK

RDS_HSLK
IC 3 EEPROM IC 5
←
5.0V 5V 3.3V

OSC LPF

ANTENNA CN401
B 1
AM ANT FMRF
1 ATT
2 Rch
24
IC 2
IC 1 2.5V
FM ANT
3 3.3V
ATT Lch
23
FMRF MIXER, IF AMP DET, FM MPX,
RDS DECODER
RF adj
ANT adj

T51 CF52
CF51
AUDIOGND
OSCGND

IC 4
VDD_3.3
RFGND

DGND

←
3.3V 3.3V 2.5V 2.5V
VCC

C
NC

2 12 15 22 16 4 17

TUN 3.3V TUN L

SYS 8.4V BUS+L BUS+L

BUS-L BUS-L

CN101 CD L
7
11
5
BUZZER EVST,EVC
1
D CD CORE UNIT(S10MP3) 8

IC 202
IP-BUS DRIVER 100
MSM51V4265EP-70TS
BUS- PEE
5 1 TX 86
PICKUP UNIT DRAM IC 101 TX
6 HA12187FP 2 RX 85 37
mute
(SERVICE)(P10) BUS+
8
RX
16
24 X1
V3R3D IPPW X601
CN101 CN901 IPPW
LASER CN721 15
D DIODE LD-
15 15
Q101
142
LD IC 201 LOUT
35 L-OUT
10 14
X2

MD
UPD63760GJ MUTE Q602 21
141 SYSPW
5 5 PD
Q603 Q101
RF-AMP,CD DECODER,
AC,BD MP3 DECODER,
HOLOGRAM BU
UNIT
F,E
DIGITAL SERVO / DATA PROCESSOR
SYSTEM CONTROLLER
FO+ FOP 58
FOCUS ACT. 1 1 71 KEYD
TO+ TOP ASENBO 75
4 4 IC 601(2/2) KEYAD
MONITOR TRACKING ACT. 38 39 WINT, 42 43
DIODE TD/FD SD/MD WAIT, Q102 PE5338A Q601
LD+
14 14 RFOK 83
AVREF
12 X201 X202
FOP CD Q701
BRST,BRXEN,BSRQ
13
TOP DRIVER 14 VCC adpw
22
VDD BDATA,BSCK
SPINDLE
IC 301
MOTOR M BA5996FM IC 702 FLPILM
9
16 XWINT, 8
SOP TC74VHCT08AFT
15 XWAIT, 80 VDSENS ejectin
SOM FOK
18
LOAD/ CARRIAGE LCOP 33
MOTOR M 17
LCOM LOEJ
22 28 CDMUTE
17
LOEJ
swvdd
ILMPW

ADENA
dsens
KYDT

DPDT

9 26 BRST,BRXEN,BSRQ
CONT CONT BU
BDATA,BSCK
CD CONTROLLER Q752 95 90 96 41 20
VD
E 93
75
CLAMP
IC 701
VD 3 20 BU
VD
DSCSNS PE5352B 4 21
77
HOME
HOME
25
CD3VON VDD
Q751
24
VDCONT
12EJ DISC
CLAMP SENSE 8EJ SENSE VDCONT
SENSE SENSE 19 5

+3.3V REGULATOR
1
1 4,5
V3R3D
4 IC 203 2 VD2 3VDD IC 703 5 19
1 VDD
BA033SFP
S-818A33AUC-BGN
+3.3V REGULATOR
VDD

Q754
VD2
2 22 VD

12 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

RESET CN351
1 IC 651 2 FL FL 4
VDD
BD4834G
Q352

11 RL RL 8

reset
Q351

CE2 32
TUNPCE2
CE1 99
TUNPCE1
DO 94
TUNPDI
DI 98
TUNPDO
CK 97
TUNPCK VDD REGULATOR
88 Q901
ldet
74 SL VDD
Q902 B
SYSTEM CONTROLLER
IC 601(1/2) 10
PE5338A DALMON
CN981
Q401
RDS_DATA 45 BACKUP SENSE BU
RDT
93 FUSE
bsens 16 16
BACK UP

BU
RDS_HSLK 42 10A
RDS57K Q931
92 ACC
asens 14 14
Q402 ACC

RDS_CK 89 ACC SENSE

rck

RDS_LOCK 44
rdslk

15 15
GND

C
BU
ELECTRONIC VOLUME/
SOURCE SELECTOR POWER AMP 20
TUN L 3 IN2-L
23
BUS+L 5 IN4+L FL- 7 7
21 FL-
BUS-L 6 IC 131 10 14 IC 301 FL+ 5 5
IN4-L FL FLIN 3 FL+
PML003AM 12
PAL007A RL- 8 8
11 RL-
RL RLIN 5
CD L 4 IN3-L RL+ 6 6
MUTE STBY RL+
B.REMOTE
22 4 25
11 11
B.REM
EVST,EVCK,EVDT
MUTE
Q502
BU SYS 8.4V REGULATOR
Q911 Q912
SYS 8.4V BU
MUTE
Q301
37

16
Q501 Q913 RR RR
X601 - +
15 BACK FR FR
UP - + D
21 SYSPW B. FL FL
REM - +
TUNER 3.3V REGULATOR RL RL
IC 921 GND ACC
- +
3 1
TUN 3.3V SYS 8.4V
58
75 CN801
BA033FP KEYD 2
Q601 KEYAD 3
83 CN831
VDD
1
BU 5 5
22
Q831
6 6
9

DGND
8 8
S1970
B PANEL UNIT C KEYBOARD UNIT
9 9
EJECT CN1901
Q961
ILB ILB
BU 7 7 4 9
BL+B
10 10 5 8

E
Q962
Q971
SWDVDD SWVDD
VDD 2 2 2 11

REMOTE CONTROL SENSOR

3
DPDT DPDT OPT IN IC 1902
11 11 10 3 TSOP4840SB1 1

S831 17 55 11
RFM

VLCD
VDD

KEY DATA KEY MATRIX

DSENS 18
DPDT LCD DRIVER/
KYDT KYDT KEY CONTROLLER
14 14 8 5
20 IC 1901
KTDT PD6340A LCD

CN1951
CN1950
F

DEH-P3500MP/XM/EW 13
5 6 7 8
 1 2 3 4

3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)

Note: When ordering service parts, be sure to refer to “EXPLODED VIEWS AND PARTS LIST” or “ELECTRICAL
PARTS LIST”.
A A-a
Large size
A-a A-b
SCH diagram

CD:0dBs

A-a A-b Guide page

A-a A-b Detailed page

FM:-27
AM:-27
CD
IP-BUS:+2

D CD CORE UNIT(S10MP3) CN901

IP-BUS:+2.2dBs

FM(30%):-26.0dBs
AM(30%):-26.0dBs

D
FM/AM TUNER UNIT

E
DETACH SENSE
C
KEYBOARD UNIT

EJECT
CN1901

B PANEL UNIT
F

14 A B DEH-P3500MP/XM/EW
3 4
1 2
 5 6 7 8

A-b A

A TUNER AMP UNIT

FM:-4.66dBs
AM:-2.66dBs
CD:+9.34dBs
IP-BUS:+9.54dBs
FRONT
R CH

FRONT
L CH

B
FM:-3.9dBs REAR
AM:-1.9dBs R CH
CD:+10.1dBs
IP-BUS:+10.3dBs REAR
L CH

7.0dBs
7.0dBs
D:0dBs
2.2dBs

600µH >
BACKUP

GND
D
ACC

B.REM

TEL

RL—

FL—

RL+

FL+

RR—

FR—

RR+

FR+

FM:+32dBs
AM:+24dBs
CD:+36dBs
IP-BUS:+36dBs

RR RR
- +
BACK FR FR
UP - +
ILL B. FL FL
REM - +
GND ACC RL
-
RL
+
E

AND

NOTE :
Symbol indicates a resistor. Decimal points for resistor
No differentiation is made between chip resistors and and capacitor fixed values
discrete resistors. are expressed as :
Symbol indicates a capacitor. 2.2 ← 2R2
No differentiation is made between chip capacitors and 0.022 ← R022
discrete capacitors.

The > mark found on some component parts indicates

the importance of the safety factor of the part.
F
Therefore, when replacing, be sure to use parts of
identical designation.

DEH-P3500MP/XM/EW A 15
5 6 7 8
 F
E
B
A

D
C

16
A-a A-b

1
1

A-a
A-b

CD:0dBs
1

2
2

FM:-27.0dBs
AM:-27.0dBs

DEH-P3500MP/XM/EW
CD:0dBs
IP-BUS:+2.2dBs

3
3

D CD CORE UNIT(S10MP3) CN901

4
4

IP-BUS:+2.2dBs
 5 6 7 8

3 4 A-b
A

DETACH SENSE

PANEL UNIT
EJECT

B
C

CN1901

C KEYBOARD UNIT

A-a A-b
D

E
AM(30%):-26.0dBs
FM(30%):-26.0dBs

FM/AM TUNER UNIT

A-a B
DEH-P3500MP/XM/EW 17
5 6 7 8
 F
E
B
A

D
C

18
A-a A-b

1
1

A-b
A TUNER AMP UNIT

1
FM:-4.66dBs
AM:-2.66dBs

2
2

CD:+9.34dBs
IP-BUS:+9.54dBs
FRONT
R CH

FRONT
L CH

FM:-3.9dBs REAR
AM:-1.9dBs R CH
CD:+10.1dBs
IP-BUS:+10.3dBs REAR
L CH

DEH-P3500MP/XM/EW
3
3

4
4
 BACKUP
600µH > GND

5
5

ACC

B.REM

TEL

RL—

FL—

RL+

FL+

RR—

FR—

RR+

FR+

FM:+32dBs
AM:+24dBs
CD:+36dBs
IP-BUS:+36dBs

6
6

RR RR
- +
BACK FR FR
UP

3
- +
B. FL FL
ILL REM - +
GND ACC RL RL
- +

AND

DEH-P3500MP/XM/EW
7
7

NOTE :
Symbol indicates a resistor. Decimal points for resistor
No differentiation is made between chip resistors and and capacitor fixed values
discrete resistors. are expressed as :
Symbol indicates a capacitor. 2.2 ← 2R2
No differentiation is made between chip capacitors and 0.022 ← R022
discrete capacitors.

The > mark found on some component parts indicates

4
the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.

8
8

A-a A-b

A-b
19
F
E
B
A

D
C
 1 2 3 4

A
3.3 KEYBOARD UNIT

C KEYBOARD UNIT
B
CAW1757

C
20 DEH-P3500MP/XM/EW
1 2 3 4
5
5

6
6

150 SML-310PT SML-310PT SML-310PT

150 SML-310PT SML-310PT SML-310PT

DEH-P3500MP/XM/EW
150 SML-310PT SML-310PT SML-310PT

7
7

150 SML-310PT SML-310PT SML-310PT

CEL1651

CEL1651

8
8

B CN1951

C
21
F
E
B
A

D
C
 1 2 3 4

3.4 CD MECHANISM MODULE(GUIDE PAGE)

A D-a

F
T
S

6R8K
6R8K
C

F
T
S
PICKUP UNIT(SERVICE)(P10)

B #

9P 1R8K

F F

F F
T T

T T
F F
T T
T T
F F

T
T
F 0
F

100P
!

SWITCHES:
CD CORE UNIT
S901 : HOME SWITCH.....ON-OFF
S902 : CLAMP SWITCH....ON-OFF
S903 : DSCSNS SWITCH....ON-OFF
S904 : 12EJ SWITCH....ON-OFF
D S905 : 8EJ SWITCH....ON-OFF
The underlined indicates the original switch position.

R756

100K

1 @
R744

S
T

7 5
C
F
6 3
E 8 2
SPINDLE MOTOR
S

M1 CXB6007 S
F
F
C

T
C
C

T
S

M2 CXB8933 C
S

LOADING/CARRIAGE
MOTOR

22 D DEH-P3500MP/XM/EW
3 4
1 2
 5 6 7 8

D CD CORE UNIT (S10MP3)

D-b A

9 R209
R207 $
R205 ^
%

R240
0R0

SIGNAL LINE
F
FOCUS SERVO LINE
T
TRACKING SERVO LINE
C CARRIAGE SERVO LINE
S SPINDLE SERVO LINE
R239

D
MA152WA

*
4R7/25

&
4R7/25

PE5352B

A
CN721
0R0

R755

CD3VON

DEH-P3500MP/XM/EW D 23
5 6 7 8
 F
E
B
A

D
C

24
D-a
A-a D-b

1
1

D-a
D-b

S
6R8K
6R8K

2
2

F
T
C
S

PICKUP UNIT(SERVICE)(P10)

DEH-P3500MP/XM/EW
#

3
3

9P 1R8K

F F

F F
T T

T T
F F
T T
T T
F F

T
T
F 0
F

100P
!

4
4
 1

SWITCHES:
CD CORE UNIT
S901 : HOME SWITCH.....ON-OFF

5
5

S902 : CLAMP SWITCH....ON-OFF

S903 : DSCSNS SWITCH....ON-OFF
S904 : 12EJ SWITCH....ON-OFF
S905 : 8EJ SWITCH....ON-OFF
The underlined indicates the original switch position.

@
R756
100K

1
R744

6
6

S
T

7 5
C
F
6 3

SPINDLE MOTOR
8 2
S

M1 CXB6007 S
F
2

F
C

T
C

C
S

DEH-P3500MP/XM/EW
M2 CXB8933 C
S

LOADING/CARRIAGE
MOTOR

7
7

8
8

D-a
A-a D-b

D-a
D-b

25
F
E
B
A

D
C
 F
E
B
A

D
C

26
D-a D-b

1
1

D-b
D CD CORE UNIT (S10MP3)

2
2

DEH-P3500MP/XM/EW
3
3

9 R209
R207 $
R205 ^
%

4
4

R240
0R0

SIGNAL LINE
F
FOCUS SERVO LINE
T
TRACKING SERVO LINE
C CARRIAGE SERVO LINE
S SPINDLE SERVO LINE
 T
TRACKING SERVO LINE
C CARRIAGE SERVO LINE
S SPINDLE SERVO LINE

R239

5
5

MA152WA

*
4R7/25

&
4R7/25

4
44

6
6

PE5352B

2
A

DEH-P3500MP/XM/EW
CN721

7
7

0R0
R755
CD3VON

8
8

D-a D-b

D-b
27
F
E
B
A

D
C
 1 2 3 4

- Waveforms Note : 1. The encircled numbers denote measuring points in the circuit diagram.
2. Reference voltage REFO1(1.65V)
A
1 DSCSNS 5V/div 500ms/div 1 DSCSNS 5V/div 500ms/div 5 SIN 1V/div 2s/div
2 CLCONT 5V/div 2 CLCONT 5V/div 6 CIN 500mV/div
3 LOEJ 5V/div 3 LOEJ 5V/div 7 TIN 500mV/div
4 VD 10V/div 4 VD 10V/div When setting up after loading a 12cm CD-DA
When loading a 12cm CD When loading an 8cm CD disc

Ref.: Ref.: Ref.:

GND GND REFO

Mode: Mode: Mode:

B Normal Normal Normal

5 SIN 1V/div 2s/div 5 SIN 1V/div 2s/div 8 FIN 200mV/div 500ms/div

6 CIN 500mV/div 6 CIN 500mV/div 9 RFOK 2V/div
7 TIN 500mV/div 7 TIN 500mV/div 5 SIN 2V/div
When setting up after loading a 12cm CD-ROM When setting up after loading a 12cm CD-ROM
disc(1 session) disc(3 session) When setting up "Source On"(12cm CD-DA)

C Ref.: Ref.: Ref.:

REFO REFO REFO

Mode: Mode: Mode:

Normal Normal Normal

0 TE 500mV/div 200ms/div ! FE 500mV/div 20ms/div ! FE 500mV/div 20ms/div

! FE 500mV/div 8 FIN 500mV/div 8 FIN 500mV/div
0 TE 500mV/div 0 TE 500mV/div
7 TIN 500mV/div 7 TIN 500mV/div
During "Play"(CD-ROM)(Track Jump is generated
D When setting up "Source On" During "Play"(CD-DA) periodically)(Refer to Track Jump waveform)

Ref.: Ref.: Ref.:

REFO REFO REFO

Mode: Mode: Mode:

Normal Normal Normal

@ MDX 500mV/div 50ms/div @ MDX 500mV/div 5µs/div # RFAGC 500mV/div 5µs/div

E 5 SIN 200mV/div 5 SIN 1V/div

Spindle waveform during "Play" Spindle waveform during "Play"(Magnified) RF eye pattern

Ref.: Ref.: Ref.:

REFO REFO REFO

Mode: Mode: Mode:

Normal Normal Normal

28 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

A
8 FIN 500mV/div 200ms/div 0 TE 500mV/div 2ms/div # RFAGC 1V/div 500µs/div
! FE 500mV/div # RFAGC 500mV/div 0 TE 500mV/div
7 TIN 500mV/div

Focus Search When "Tracking Open" 1 Track Jump

Ref.: Ref.: Ref.:

REFO REFO REFO

Mode: Mode: Mode:

TEST TEST TEST B

# RFAGC 1V/div 1ms/div # RFAGC 1V/div 5ms/div # RFAGC 1V/div 500µs/div

0 TE 500mV/div 0 TE 500mV/div 7 TIN 1V/div
7 TIN 500mV/div 7 TIN 500mV/div 0 TE 1V/div
8 FIN 1V/div
32 Track Jump 100 Track Jump When passing black dots(800µm)

Ref.: Ref.: Ref.: C

REFO REFO REFO

Mode: Mode: Mode:

TEST TEST Norma

# RFAGC 1V/div 200ms/div $ LRCKIN 2V/div 10µs/div $ LRCKIN 2V/div 2µs/div

% TE 1V/div DIN 2V/div DIN 2V/div
6 CIN 500mV/div ^ SCKIN 2V/div ^ SCKIN 2V/div
5 SIN 2V/div
During inside/outside search
(outer circumference → inner circumference) Digital Audio Digital Audio(Magnified) D

Ref.: Ref.: Ref.:

REFO GND REFO

Mode: Mode: Mode:

Norma Norma Norma

& LOUT 1V/div 200µs/div 1 DSCSNS 5V/div 500ms/div 1 DSCSNS 5V/div 10µs/div
* ROUT 1V/div 5V/div CLCONT 5V/div E
3 LOEJ 5V/div 3 LOEJ 5V/div

Analog Audio(sine wave, 1kHz) When "Eject"(12cm CD) When "Eject"(8cm CD)

Ref.: Ref.: Ref.:

AGND GND GND

Mode: Mode: Mode:

Norma Norma Norma

DEH-P3500MP/XM/EW 29
5 6 7 8
 1 2 3 4

A
5 SIN 1V/div 500ms/div 5 SIN 1V/div 500ms/div
6 CIN 500mV/div 6 CIN 500mV/div
7 TIN 500mV/div 7 TIN 500mV/div

When switching to CD-ROM from CD-DA When switching to CD-DA from CD-ROM
(BAND key) (BAND key)

Ref.: Ref.:
REFO REFO

Mode: Mode:
B Normal Normal

30 DEH-P3500MP/XM/EW
1 2 3 4
5 6 7 8

DEH-P3500MP/XM/EW 31
5 6 7 8
 1 2 3 4

4. PCB CONNECTION DIAGRAM

4.1 TUNER AMP UNIT
A
NOTE FOR PCB DIAGRAMS
1.The parts mounted on this PCB A TUNER AMP UNIT
include all necessary parts for
several destination.
For further information for
CORD ASSY
respective destinations, be sure
to check with the schematic dia-
gram.
2.Viewpoint of PCB diagrams
WIRED 2
Connector Capacitor IP-BUS 16
REMOTE 15 1
CONTROL
SIDE A
B
SIDE B
P.C.Board Chip Part

L981

D
E CN901

DETACH SENSE
F

A
32 DEH-P3500MP/XM/EW
1 2 3 4
5 6 7 8

A
SIDE A
IC,Q

RCA OUT

ANTENNA

FM/AM TUNER UNIT

B CN1950
F
FRONT
A
DEH-P3500MP/XM/EW 33
5 6 7 8
 1 2 3 4

A
A TUNER AMP UNIT
IC,Q

1 1

A
34 DEH-P3500MP/XM/EW
1 2 3 4
5 6 7 8

A
SIDE B

A
DEH-P3500MP/XM/EW 35
5 6 7 8
 1 2 3 4

4.2 PANEL UNIT

B PANEL UNIT SIDE A

C CN1901
EJECT

B PANEL UNIT SIDE B

D

A CN831

B
36 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

4.3 KEYBOARD UNIT

C KEYBOARD UNIT SIDE A C KEYBOARD UNIT SIDE B

A
IC,Q
IC,Q ↓

↓
↓
AUDIO

B CN1951
↓
PAUSE

FUNC
B

BAND/ESC
LOUD

C
6
5
4

D
3
2
1

E
SRC
DISP

↓
↓

EQ

F
CLK

C
DEH-P3500MP/XM/EW 37
5 6 7 8
 1 2 3 4

4.4 CD MECHANISM MODULE

D CD CORE UNIT(S10MP3) SIDE A

M2
LOADING
/CARRIAGE MOTOR
B

M1
SPINDLE MOTOR

A CN721

D
HOME

PICKUP UNIT
(SERVICE)

D
38 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

D CD CORE UNIT(S10MP3) SIDE B

8EJ 12EJ

CLAMP

DSCSNS
B

D
DEH-P3500MP/XM/EW 39
5 6 7 8
 1 2 3 4

A 5. ELECTRICAL PARTS LIST

NOTES:
- Parts whose parts numbers are omitted are subject to being not supplied.
- The part numbers shown below indicate chip components.
Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
=====Circuit Symbol and No.===Part Name Part No. =====Circuit Symbol and No.===Part Name Part No.
B --- ------ ------------------------------------------ ------------------------- --- ------ ------------------------------------------ -------------------------
D 982 Diode MPG06G-6415G50
A Unit Number
Unit Name
: CWM8652
: Tuner Amp Unit ZNR
L
401
101
Arrester
Inductor
DSP-201M
LAU2R2K
L 131 Inductor LCTA2R2J2520
MISCELLANEOUS L 401 Ferri-Inductor LAU4R7K
IC 101 IC HA12187FP L 402 Inductor LAU1R0K
IC 131 IC PML003AM L 403 Inductor LAU2R2K
IC 301 IC PAL007A L 404 Inductor LAU1R0K
IC 601 IC PE5338A L 601 Inductor LAU2R2K
IC 651 IC BD4834G L 721 Inductor LAU2R2K
IC 921 IC BA033FP L 951 Inductor LAU2R2K
Q 101 Transistor 2SA1037K L 971 Inductor LAU2R2K
Q 102 Transistor DTC124EK L 981 Choke Coil 600µH CTH1280
C Q 301 Transistor DTC124EK X 601 Radiator 12.58291MHz CSS1402
Q 351 Transistor IMH3A S 831 Switch(DETACH SENSE) CSN1039
Q 352 Transistor IMH3A SP 601 Buzzer CPV1062
Q 401 Transistor IMH1A FM/AM Tuner Unit CWE1645
Q 402 Transistor IMH1A
Q 501 Transistor 2SC2412K RESISTORS
Q 502 Transistor IMD2A
R 101 RS1/16S150J
Q 601 Transistor DTA114EK R 102 RS1/16S470J
Q 751 Transistor IMD2A R 103 RS1/16S101J
Q 752 Transistor 2SD2375 R 104 RS1/16S101J
Q 754 Transistor 2SD1760F5 R 105 RS1/16S181J
Q 831 Transistor DTC143EK
R 106 RS1/16S181J
Q 901 Transistor 2SD2375 R 107 RS1/16S223J
D Q 902 Transistor IMD2A R 108 RS1/16S223J
Q 911 Transistor 2SD2375 R 109 RS1/16S102J
Q 912 Transistor 2SB1238 R 110 RS1/16S102J
Q 913 Transistor DTC114EK
R 111 RS1/16S222J
Q 931 Transistor IMX1 R 112 RS1/16S103J
Q 951 Transistor 2SA1037K R 113 RS1/16S332J
Q 961 Transistor 2SB1238 R 114 RS1/16S562J
Q 962 Transistor DTC114EK R 131 RS1/16S471J
Q 971 Transistor 2SA1036K
R 132 RS1/16S471J
D 501 Diode DAN202U R 133 RAB4C102J
D 502 Diode HZS9L(A2) R 137 RS1/16S101J
D 571 Diode MPG06G-6415G50 R 138 RS1/16S101J
D 572 Diode MPG06G-6415G50 R 139 RS1/16S101J
D 751 Diode HZS9L(B1)
E
R 140 RS1/16S101J
D 753 Diode HZS6L(C1) R 141 RS1/16S0R0J
D 831 Diode DAN202U R 142 RS1/16S0R0J
D 832 Diode DAN202U R 301 RS1/16S153J
D 833 Diode DAP202U R 302 RS1/16S103J
D 834 Diode DAP202U
R 303 RS1/16S103J
D 901 Diode HZS6L(B1) R 304 RS1/16S331J
D 902 Diode MPG06G-6415G50 R 351 RS1/16S821J
D 911 Diode HZS9L(B3) R 352 RS1/16S821J
D 921 Diode 1SR154-400 R 353 RS1/16S821J
D 922 Diode 1SR154-400
R 354 RS1/16S821J
D 923 Diode 1SR154-400 R 359 RS1/16S223J
D 931 Diode HZS7L(C3) R 360 RS1/16S223J
D 932 Diode HZS7L(A1) R 361 RS1/16S223J
F
D 951 Diode DAN202U R 362 RS1/16S223J
D 981 Diode MPG06G-6415G50

40 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

=====Circuit Symbol and No.===Part Name Part No. =====Circuit Symbol and No.===Part Name Part No.
--- ------ ------------------------------------------ ------------------------- --- ------ ------------------------------------------ ------------------------- A
R 401 RS1/16S681J R 901 RD1/4PU221J
R 402 RS1/16S681J R 902 RS1/16S223J
R 403 RS1/16S122J R 903 RS1/16S821J
R 404 RS1/16S681J R 904 RS1/16S821J
R 405 RS1/16S681J R 905 RS1/16S0R0J

R 406 RS1/16S681J R 911 RS1/16S223J

R 409 RAB4C223J R 914 RS1/16S152J
R 501 RS1/16S103J R 915 RD1/4PU152J
R 502 RS1/16S473J R 916 RS1/16S223J
R 504 RS1/16S102J R 921 RD1/4PU1R8J

R 601 RS1/16S102J R 931 RS1/16S104J

R 603 RS1/16S473J R 932 RS1/16S473J
R 604 RS1/16S473J R 933 RS1/16S103J B
R 605 RS1/16S102J R 934 RS1/16S473J
R 606 RS1/16S473J R 935 RS1/16S472J

R 607 RS1/16S104J R 951 RS1/16S102J

R 609 RS1/16S103J R 952 RS1/16S472J
R 612 RS1/16S0R0J R 953 RS1/16S472J
R 615 RS1/16S103J R 954 RS1/16S153J
R 622 RS1/16S473J R 961 RS1/16S223J

R 623 RS1/16S473J R 962 RS1/16S182J

R 624 RS1/16S473J R 963 RD1/4PU1R0J
R 625 RS1/16S473J R 965 RS1/16S182J
R 626 RS1/16S681J R 971 RS1/16S153J
R 627 RS1/16S681J R 972 RS1/16S153J

R 628 RS1/16S681J R 973 RS1/16S222J C

R 640 RS1/16S0R0J R 981 RD1/4PU102J
R 651 RS1/16S102J R 9405 RD1/4PU0R0J
R 652 RS1/16S183J
R 711 RS1/16S682J CAPACITORS
R 718 RS1/16S473J C 101 CKSRYB104K25
R 721 RS1/16S0R0J C 131 CEJQ1R0M50
R 722 RS1/16S682J C 132 CEJQ1R0M50
R 723 RS1/16S682J C 133 CKSRYB104K25
R 724 RS1/16S682J C 134 CKSRYB104K25

R 726 RS1/16S0R0J C 135 CEJQ1R0M50

R 727 RS1/16S821J C 136 CEJQ1R0M50
R 728 RS1/16S821J C 137 CEJQ1R0M50
R 734 RS1/16S102J C 138 CEJQ1R0M50
R 738 RS1/16S0R0J C 139 CEJQ470M16 D
R 739 RS1/16S0R0J C 140 CKSRYB104K25
R 743 RS1/16S221J C 141 CCSRCH102J25
R 744 RS1/16S221J C 143 CEJQ100M16
R 745 RS1/16S221J C 145 CKSRYB105K10
R 746 RS1/16S221J C 146 CKSRYB105K10

R 747 RS1/16S221J C 147 CKSRYB153K50

R 748 RS1/16S221J C 148 CKSRYB153K50
R 751 RD1/4PU821J C 172 CCSRCH102J25
R 752 RD1/4PU221J C 301 CKSRYB474K10
R 755 RS1/16S331J C 302 CKSRYB474K10

R 757 RD1/4PU0R0J C 303 CKSRYB474K10

R 801 RS1/16S102J C 304 CKSRYB474K10
R 802 RS1/16S102J C 305 CKSRYB474K10 E
R 831 RS1/16S222J C 306 CKSRYB474K10
R 832 RS1/16S222J C 307 CKSRYB474K10

R 833 RS1/16S222J C 308 CKSRYB474K10

R 834 RS1/16S222J C 309 CEHAR330M10
R 835 RS1/16S473J C 310 3300µF/16V CCH1486
R 836 RS1/16S473J C 311 CKSRYB104K25
R 837 RD1/4PU391J C 312 CEHAR100M16

R 838 RS1/16S102J C 313 CKSQYB225K10

R 839 RS1/16S102J C 314 CKSQYB225K10
R 840 RS1/16S102J C 316 CKSQYB105K16
R 841 RS1/16S102J C 351 CEJQ100M16
R 845 RS1/16S102J C 352 CEJQ100M16

DEH-P3500MP/XM/EW 41
5 6 7 8
 1 2 3 4

=====Circuit Symbol and No.===Part Name Part No. =====Circuit Symbol and No.===Part Name Part No.
A --- ------ ------------------------------------------ ------------------------- --- ------ ------------------------------------------ -------------------------
C 353 CEJQ100M16 RESISTORS
C 354 CEJQ100M16
C 401 CKSRYB103K50 R 1801 RS1/16S151J
C 402 CEJQ470M6R3 R 1802 RS1/16S151J
C 403 CKSRYB103K50 R 1803 RS1/16S151J
R 1804 RS1/16S181J
C 404 CKSRYB103K50 R 1805 RS1/16S151J
C 405 CEJQ101M16
C 407 CKSYB475K10 R 1806 RS1/16S181J
C 601 CKSRYB473K50 R 1807 RS1/16S181J
C 602 CKSRYB105K10 R 1808 RS1/16S151J
R 1809 RS1/16S181J
C 603 CCSRCH200J50 R 1810 RS1/16S181J
C 604 CCSRCH200J50
B C 605 CEJQ4R7M35 R 1811 RS1/16S151J
C 606 CKSRYB104K25 R 1812 RS1/16S181J
C 608 CCSRCH101J50 R 1813 RS1/16S181J
R 1814 RS1/16S151J
C 609 CCSRCH470J50 R 1815 RS1/16S181J
C 611 CKSRYB104K25
C 652 CKSRYB105K10 R 1903 RS1/16S473J
C 725 CCSRCH102J25 R 1904 RS1/16S222J
C 726 CCSRCH102J25 R 1905 RS1/16S222J
R 1906 RS1/16S473J
C 727 470µF/16V CCH1331
C 751 CKSRYB224K10 CAPACITORS
C 752 CKSRYB102K50
C 753 CEJQ101M16 C 1801 CKSRYB104K16
C 754 CKSRYB473K50 C 1802 CKSRYB104K16
C 1901 CKSRYB224K10
C C 755 CEJQ101M16
C 901 CEJQ470M10
C
C
902
903
CKSRYB103K50
CKSRYB472K50 B Unit Number
Unit Name
: CWM8758
: Panel Unit
C 904 470µF/16V CCH1331
MISCELLANEOUS
C 911 CEJQ221M10
C 912 CKSRYB103K50 D 1970 LED CL220PGC
C 913 CEJQ101M16 S 1970 Push Switch(EJECT) CSG1112
C 921 CEJQ220M10
C 922 CKSRYB103K50 RESISTORS

C 923 CKSYB475K10 R 1970 RS1/16S101J

C 931 CKSRYB104K25 R 1971 RS1/16S101J
C 961 CKSRYB473K50 R 1972 RS1/16S0R0J

CAPACITORS
D Unit Number : CWM8632
C Unit Name : Keyboard Unit C 1970 CKSRYB104K16
MISCELLANEOUS
IC 1901 IC PD6340A D Unit Number
Unit Name
: CWX2742
: CD Core Unit(S10MP3)
D 1801 LED NSSW440-9159
D 1802 LED NSSW440-9159 MISCELLANEOUS
D 1803 LED SML-310PT
D 1804 LED SML-310PT IC 201 IC UPD63760GJ
IC 202 IC MSM51V4265EP-70TS
D 1805 LED SML-310PT IC 203 IC BA033SFP
D 1806 LED SML-310PT IC 301 IC BA5996FM
D 1807 LED SML-310PT IC 701 IC PE5352B
D 1808 LED SML-310PT
D 1809 LED SML-310PT IC 702 IC TC74VHCT08AFT
E IC 703 IC S-818A33AUC-BGN
D 1810 LED SML-310PT Q 101 Transistor 2SB1132
D 1811 LED SML-310PT Q 601 Transistor DTC323TK
D 1812 LED SML-310PT Q 602 Transistor DTC323TK
D 1813 LED SML-310PT
D 1814 LED SML-310PT Q 603 Transistor 2SB709A
Q 701 Transistor UN2111
D 1901 Diode DAN202U D 101 Diode 1SS355
D 1902 Diode DAP202U D 201 Diode 1SR154-400
X 1901 Ceramic Resonator 4.97MHz CSS1422 D 601 Diode MA152WA
IL 1801 Lamp 14V 40mA CEL1651
IL 1802 Lamp 14V 40mA CEL1651 L 201 Inductor CTF1386
L 202 Inductor CTF1386
LCD1901 LCD CAW1757 L 204 Inductor CTF1386
L 205 Inductor CTF1386
L 206 Inductor CTF1386
F

42 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

=====Circuit Symbol and No.===Part Name Part No. =====Circuit Symbol and No.===Part Name Part No.
--- ------ ------------------------------------------ ------------------------- --- ------ ------------------------------------------ ------------------------- A
L 207 Inductor CTF1386 R 310 RS1/16SS822J
L 208 Inductor CTF1386 R 311 RS1/16SS0R0J
L 209 Inductor CTF1386 R 601 RS1/16S101J
L 211 Inductor CTF1386 R 602 RS1/16S101J
L 212 Inductor CTF1386 R 603 RS1/16S223J

L 701 Inductor CTF1386 R 604 RS1/16S223J

L 702 Inductor LCYBR22J1608 R 605 RS1/16SS103J
L 703 Inductor CTF1386 R 707 RS1/16SS0R0J
L 704 Inductor CTF1386 R 708 RS1/16SS102J
TH 701 Thermistor CCX1037 R 710 RS1/16SS102J

X 201 Ceramic Resonator 16.934MHz CSS1603 R 711 RS1/16SS102J

X 701 Ceramic Resonator 16.00MHz CSS1616 R 712 RS1/16SS102J
S 901 Switch(HOME) CSN1051 R 713 RS1/16SS102J B
S 902 Switch(CLAMP) CSN1051 R 714 RS1/16SS473J
S 903 Spring Switch(DSCSNS) CSN1052 R 715 RAB4CQ221J

S 904 Switch(12EJ) CSN1051 R 716 RAB4CQ221J

S 905 Switch(8EJ) CSN1051 R 717 RAB4CQ221J
R 718 RAB4CQ221J
RESISTORS R 719 RAB4CQ221J
R 720 RS1/16SS471J
R 101 RS1/10S1R5J
R 102 RS1/10S1R5J R 721 RS1/16SS471J
R 103 RS1/10S1R5J R 722 RAB4CQ221J
R 104 RS1/10S1R5J R 723 RS1/16SS102J
R 105 RS1/10S1R5J R 724 RN1/16SE1302D
R 725 RS1/16SS222J
R 201 RS1/16SS102J
R 202 RS1/16SS333J R 726 RS1/16SS103J C
R 203 RS1/16SS333J R 727 RS1/16SS473J
R 205 RS1/16SS0R0J R 728 RS1/16SS473J
R 207 RS1/16SS0R0J R 729 RS1/16SS223J
R 730 RS1/16SS473J
R 209 RS1/16SS0R0J
R 212 RS1/16SS221J R 731 RS1/16SS104J
R 213 RS1/16SS1002D R 732 RS1/16SS104J
R 214 RS1/16SS1002D R 733 RS1/16SS104J
R 215 RS1/16SS6801D R 737 RAB4CQ473J
R 739 RAB4CQ473J
R 216 RS1/16SS6801D
R 217 RS1/16SS1002D R 740 RS1/16SS473J
R 218 RS1/16SS1002D R 742 RS1/16SS104J
R 219 RS1/16SS1002D R 744 RS1/16SS104J
R 220 RS1/16SS1002D R 745 RS1/16SS473J
R 746 RS1/16SS104J D
R 221 RS1/16SS103J
R 222 RS1/16SS103J R 747 RS1/16SS104J
R 223 RS1/16SS103J R 748 RS1/16SS104J
R 224 RS1/16SS103J R 754 RS1/16SS102J
R 225 RS1/16SS103J R 755 RS1/16SS102J
R 756 RS1/16SS104J
R 226 RS1/16SS393J
R 227 RS1/16SS103J R 801 RS1/16SS104J
R 228 RS1/16SS182J R 802 RS1/16SS473J
R 229 RS1/16SS103J R 803 RS1/16SS273J
R 231 RS1/16SS0R0J R 901 RS1/16SS221J
R 902 RS1/16SS221J
R 232 RS1/16SS182J
R 233 RS1/16SS0R0J R 903 RS1/16SS221J
R 237 RS1/16SS104J R 904 RS1/16SS221J
R 238 RS1/16SS473J R 905 RS1/16SS221J E
R 239 RS1/16SS333J R 906 RS1/16SS221J

R 240 RS1/16SS0R0J CAPACITORS

R 301 RS1/16SS183J
R 302 RS1/16SS822J C 101 CKSSYB104K10
R 303 RS1/16SS0R0J C 102 CKSSYB104K10
R 304 RS1/16SS183J C 103 CEV101M16
C 104 CEV101M4
R 305 RS1/16SS822J C 105 CKSSYB104K10
R 306 RS1/16SS0R0J
R 307 RS1/16SS183J C 106 CCSRCH101J50
R 308 RS1/16SS822J C 108 CKSSYB104K10
R 309 RS1/16SS183J C 109 CEV100M16
C 201 CKSSYB471K50
C 202 CKSSYB104K10
F

DEH-P3500MP/XM/EW 43
5 6 7 8
 1 2 3 4

=====Circuit Symbol and No.===Part Name Part No.

A --- ------ ------------------------------------------ -------------------------
C 203 CKSSYB104K10
C 204 CEV220M6R3
C 205 CKSSYB103K16
C 206 CKSSYB103K16
C 207 CEV221M4

C 208 CKSSYB104K10
C 209 CKSSYB104K10
C 210 CKSSYB104K10
C 211 CKSSYB104K10
C 216 CKSSYB332K50

C 217 CKSSYB104K10
C 218 CKSSYB223K16
C 219 CKSSYB104K10
B
C 220 CKSSYB103K16
C 221 CKSSYB104K10

C 222 CCSSCH270J50
C 223 CCSSCJ3R0C50
C 224 CKSSYB104K10
C 225 CKSSYB103K16
C 226 CCSSCH680J50

C 227 CCSSCH470J50
C 228 CKSSYB682K25
C 230 CKSSYB104K10
C 232 CKSSYB104K10
C 233 47µF/6.3V CCH1436

C C 234 CEV221M4
C 235 CKSRYB224K16
C 237 CKSSYB104K10
C 238 CKSSYB104K10
C 239 CCSSCH9R0D50

C 242 CKSSYB104K10
C 243 CKSSYB104K10
C 245 CKSSYB104K10
C 246 CKSSYB104K10
C 301 CKSSYB331K50

C 302 CKSSYB331K50
C 303 CKSSYB472K25
C 304 CKSSYB472K25
C 305 CEV101M16
D C 306 CKSRYB224K16

C 601 CCSRCH102J50
C 602 CCSRCH102J50
C 603 4.7µF/25V CCH1508
C 604 4.7µF/25V CCH1508
C 701 CKSSYB104K10

C 702 CKSSYB471K50
C 703 CKSSYB103K16
C 704 CEV1R0M50
C 705 CKSSYB104K10
C 706 CKSSYB471K50

C 707 CKSSYB104K10
C 708 CKSSYB104K10
E C 709 CKSSYB103K16
C 710 CKSSYB104K10
C 711 10µF/10V CCH1349

C 712 CKSRYB224K16
C 713 CKSSYB104K10
C 714 CKSSYB104K10
C 715 CKSSYB103K16
C 716 CKSSYB103K16

C 901 CKSSYB104K10
C 903 CCSRCH101J50

Miscellaneous Parts List

Pickup Unit(Service)(P10) CXX1641
F M 1 Motor Unit(SPINDLE) CXB6007
M 2 Motor Unit(LOADING/CARRIAGE) CXB8933

44 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

6. ADJUSTMENT A

6.1 JIG CONNECTION DIAGRAM

RUBBER BAND

CN1951
B

TUNER AMP UNIT

PANEL UNIT (SIDE A)

GGD1316

CN1901

KEYBOARD UNIT (SIDE B)

D

RUBBER BAND

DEH-P3500MP/XM/EW 45
5 6 7 8
 1 2 3 4

A
6.2 CD ADJUSTMENT
1) Cautions on adjustments 2) Test mode
• In this product the single voltage (3.3V) is used for the This mode is used to adjust the CD mechanism module.
regulator. The reference voltage is the REFO1 (1.65V) • To enter the test mode.
instead of the GND. While pressing the 4 and 6 keys at the same time, reset.
If you should mistakenly short the REFO1 with the GND • To exit from the test mode.
during adjustment, accurate voltage will not be obtained, Turn off the ACC and back up.
and the servo’s misoperation will apply excessive shock
to the pickup. To avoid such problems: Notes:
a. Do not mix up the REFO1 with the GND when a. During ejection, do not press any other keys than the
connecting the (-) probe of measuring instruments. EJECT key until the loaded disc is ejected.
B Especially on an oscilloscope, avoid connecting the (-) b. If you have pressed the (→) key or (←) key during focus
probe for CH1 to the GND. search, turn off the power immediately to protect the
b. In many cases, measuring instruments have the same actuator from damage caused by the lens stuck.
potential as that for the (-) probe. Be sure to set the c. For the TR jump modes except 100TR, the track jump
measuring instruments to the floating state. operation will continue even if the key is released.
c. If you have mistakenly connected the REFO1 to the GND, d. For the CRG move and 100TR jump modes, the tracking
turn off the regulator or the power immediately. loop will be closed at the same time when the key is
released.
• Before mounting and removing filters or leads for e. When the power is turned off and on, the jump mode
adjustment, be sure to turn off the regulator. is reset to the single TR (91), the RF amp gain is set to 0dB,
and the auto-adjustment values are reset to the default
C
• For stable circuit operation, keep the mechanism settings.
operating for about one minute or more after the
regulator is turned on.

• In the test mode, any software protections will not

work. Avoid applying any mechanical or electrical
shock to the mechanism during adjustment.

• The RFI and RFO signals with a wide frequency range

are easy to oscillate. When observing the signals,
insert a resistor of 1k ohms in series.

D • The load and eject operation is not guarantied with the

mechanism upside down. If the mechanism is blocked
due to mistaken eject operation, reset the product or
turn off and on the ACC to restore it.

46 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

- Flow Chart

[KEY] [4]+[6]+Reset or
[4]+[6]+BU+ACC
Contents Test Mode In A
Display

[CD]or[SOURCE]
Source On

TRK MIN SEC

[BAND] [3] [2] [4]

Power On Power On RF AMP *1 SPINDLE *9
(T.Offset is adjusted) (T.Offset is not adjusted) Gain switching Speed switching
TRK 00 MIN00 SEC 00 TRK 99 MIN 99 SEC 99 TRK GGMIN GGSEC GG TRK SP MIN SP SEC SP

B
[BAND] [3] [6] [1] [→] [←] [2]
Focus Close Focus Mode *2 Tracking Servo *8 *8 Automatic adjustment
Power Off CRG+ CRG-
S curve check switching Close switching *3
TRK MIN SEC TRK MIN SEC TRK
91 91 91 0x MIN0x SEC 0x TRK MIN
00 00 00 SEC TRK MIN
00 00 00 SEC TRK MIN
00 00 00 SEC TRK
?? MIN?? SEC ??
TRK
or 99 MIN99 SEC99 or TRK
99 MIN99 SEC 99 or TRK
99 MIN 99 SEC 99

[BAND] [1] [6] [3] [→] [←] [2]

T.Close and AGC T.Close RF AGC / CRG+ CRG- T.Balance adjustment /
Power Off Applicable servomechanism Applicable servomechanism RF AGC coefficient display T.BAL coefficient display
TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK ?? MIN ?? SEC ?? TRK8x MIN8x SEC8x TRK8x MIN8x SEC8x TRK ?? MIN?? SEC ??
?tr ?min ?sec ?tr ?min ?sec TRK 9x MIN 9x SEC 9x TRK 9x MIN 9x SEC 9x
or or

C
[BAND] [1] [3] [6] [→] [←] [2]
F,T,RF AGC *7 F,T AGC / F.Bias CRG/TR Jump *5 *4 *4
Tracking Open
Power Off F.Bias display switching
CRG/TR Jump + CRG/TR Jump -
RF AGC value switching
TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK MIN SEC TRK
?? ?? ?? ?tr ?min ?sec ?tr ?min ?sec ?tr ?min ?sec ?tr ?min ?sec 8x MIN8x SEC 8x
TRK
or 9xMIN 9xSEC 9x
*6

[BAND] [2]

Power Off Tracking Open

TRK MIN SEC TRK8x MIN8x SEC8x

or TRK 9x MIN 9x SEC 9x

*1) TYP → -6dB → -12dB Operation

TRK MIN SEC TRK 06 MIN 06 SEC 06 TRK 12 MIN 12 SEC 12 [Key]
Test Mode

*2) Focus Close → S.Curve check setting → F EQ measurement setting [BAND] Power On / Off
TRK 00 MIN 00 SEC 00 TRK 01 MIN 01 SEC 01 TRK 02 MIN 02 SEC 02
(TRK 99 MIN 99 SEC 99) CRG + / TR Jump +
[→]
(Direction of the external surface)
*3) F.Offset Display → T.Offset Display → Switch to the order of the original display CRG - / TR Jump -
[←]
(Direction of the internal surface)
U.CLS and AGC and Applicable servomechanism /
[1]
*4) 1TR / 32TR / 100TR AGC, AGC display setting
RF Gain switching / Offset adjustment display /
[2]
T.Balance adjustment / T.Open E
*5) Single TR → 32TR → 100TR → CRG Move Close, S.Curve / Rough Servo and RF AGC /
[3]
9x(8x) : 91(81) 92(82) 93(83) 94(84) F, T, RF AGC
SPDL 1X / 2X switching
[4]
*6) Only at the time of CRG move, 100TR jump As for the double speed (2x), audio output cannot be supported.
1st - ON : ERR count Beginning (30Sec)
[5] Error Rate measurement
2nd - ON : BER display data [%]
*7) TRK/MIN/SEC → F.AGC → T.AGC → F Bias → RF AGC F.Mode switching / Tracking Close /
[6]
CRG • TR Jump switching

*8) CRG motor voltage = 2[V]

*9) Applicability : A, B, C, D, E, F Applicability : G

TYP(1X) → 2X → 1X TYP(2X) → 1X → 2X
TRK MIN SEC TRK 22 MIN 22 SEC 22 TRK 11 MIN 11 SEC 11 TRK MIN SEC TRK 11 MIN 11 SEC 11 TRK 22 MIN 22 SEC 22
F
As for the double speed (2x), audio output cannot be supported

DEH-P3500MP/XM/EW 47
5 6 7 8
 1 2 3 4

A 6.3 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT

• Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism
module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU
unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the
PU unit must be changed, the grating should be checked using the procedure below.

• Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.
B
• Symptoms of Mal-adjustment :
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
track search operations, or taking a long time for track searching.

• Method :
• Measuring Equipment • Oscilloscope, Two L.P.F.
• Measuring Points • E, F, REFO1
• Disc • ABEX TCD-782
• Mode • TEST MODE

C CD CORE UNIT(S10MP3)

L.P.F.
REFO1
Xch Ych
E 100kΩ
Oscilloscope
VREF 390pF

F 100kΩ

VREF 390pF
D
L.P.F.
F
E

• Checking Procedure
1. In test mode, load the disc and switch the 3V regulator on.
2. Using the → and ← buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance
adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the
E fourth press.
4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase
difference is within 75° . Refer to the photographs supplied to determine the phase angle.
5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the
mechanism should be judged to be at fault.
• Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the
average angle.
• Hint
Reloading the disc changes the clamp position and may decrease the "wobble".
F

48 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

Grating waveform Ech → Xch 20mV/div, AC A

Fch → Ych 20mV/div, AC

0° 30°

45° 60°
C

75° 90°

DEH-P3500MP/XM/EW 49
5 6 7 8
 1 2 3 4

6.4 ERROR MODE

- Error Messages
Error is displayed with number for Error cause when CD is inoperative or stops with Error during operation.
A The purpose is to reduce nonsense calls from users as well as to assist all related analysis and repair for defects
at service station.

(1) Basic Display Method

1) When CSMOD (CD mode area for system) is SERRORM, Error code will be written in DMIN (minutes area for
display), DSEC (seconds area for display). The same data shall be written in DMIN and DSEC. DTNO is blank as
usual.
2) Display Example of Head Unit
The following is about LCD display ability. xx is Error number.

8 digits 6 digits 4 digits

B ERROR–xx ERR–xx E–xx
OR
Err–xx

*) In case of OEM, Error display will follow the specification defined by OEM makers.

(2) Error Code List

No. Classification Contents Details • Cause
10 Electricity Carriage Home NG CRG can’t move to the inner.
CRG can’t move from the inner.
C → HOME SW failure, CRG movement failure.
11 Electricity Focus Search NG Focus can’t be caught.
→ Back of Disc / Severe dirt and vibration.
12 Electricity Spindle Lock NG Not spindle, lock. Wrong subcode (can’t read).
Subcode NG → Defective Spindle. Scratch and dirt on Disc. Intense vibration.
RF-amp NG The appropriate gain of the RF amp cannot be obtained.
→ Defective spindle.
→ Scratched or dirty disc. Severe vibration. Abnormal CD signals.
→ Blanc CD-R disc. Disc inserted upside down.
D 17 Electricity Setup NG AGC protection doesn’t work, out of Focus soon.
→ Scratch on Disc/Severe dirt and vibration.
22 Disc Impossible to play There is no playable MP3 or WMA file present in a disc.
→ No MP3 or WMA file exists in a CD-ROM disc inserted.
23 Disc File Format NG Contents are stored in an incompatible file format.
→ The contents in a CD-ROM disc inserted are recorded in a file format
other than ISO9660 Level-1 and 2.
30 Electricity Search Time Out Can’t reach the target address.
→ Defective CRG/tracking, or scratch on Disc.
44 Disc Impossible to play There is no playable TRK No. present in a disc.
E
→ All TRK Nos. In a disc inserted are specified as a track which should
be skipped, in the track skip information.
50 Mecha Disc Load / Eject NG Disc loading/ejection cannot be complete.
→ Foreign objects entered into the mechanism. Disc caught in between
during loading/ejection.
A0 System Power NG Power supply (VD) isn’t connected to the ground.
→ Defective SW transistor. Abnormal power (failed connector)
Note : Error doesn’t display in mechanism only. (CD off causes mechanism off)
If TOC can’t be read, error wouldn’t occur, but mechanism still continues its operation.
When newly design head unit, be sure to apply as the display examples above.
F The upper digits of error code is mainly classified by 3 kinds as follows:
1x: Setup related error, 3x: Search related error, Ax: Other errors.

50 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

7. GENERAL INFORMATION
7.1 DIAGNOSIS A

7.1.1 DISASSEMBLY
- Removing the Case (not shown)

1. Remove the Case.

- Removing the CD Mechanism Module (Fig.1) CD Mechanism Module

1 Remove the four screws. B

Disconnect the connector and then remove the

1
CD Mechanism Module.
1

- Removing the Grille Assy (Fig.1)

2 Remove the two screws and then remove

the Grille Assy. C
1

2 1 2

Grille Assy
Fig.1

- Removing the Tuner Amp Unit (Fig.2)

D

1 Remove the screw. 2

2
2

2 Remove the three screws.

3 Straight the tabs at three locations

indicated.
4
4 Remove the screw and then remove E
1
the Tuner Amp Unit.

3 3 3

F
Tuner Amp Unit Fig.2

DEH-P3500MP/XM/EW 51
5 6 7 8
 1 2 3 4

- How to hold the Mechanism Unit

1. Hold the top and bottom frame.
2. Do not squeeze top frame's front portion too tight,
because it is fragile.

Do not squeeze.

- Removing the Upper and Lower Frames

1. With a disc clamped, remove the four springs (A),
Upper Frame
the two springs (B), the two springs (C), and the A
four screws. A
2. To remove the upper frame, open it on the fulcrum C
A.
3. While lifting the carriage mechanism, remove the A
C three dampers.
4. With the frames removed, insert the connectors
coming from the main unit and eject the disc.
Caution: Before installing the carriage mechanism in
the frames, be sure to apply some alcohol to the A
dampers and set the mechanism to the clamp mode.

Carriage Mechanism
B C
A
Damper
Lower Frame
Damper

D B Damper

- Removing the Pickup Unit Washer

1. Set the mechanism to the clamp mode.
Pickup Lock Arm
2. Remove the lead wires from the inner holder. Change
3. Remove the two washers, styling holder, change Arm
arm, and pickup lock arm. Styling Holder
4. While releasing from the hook of the inner holder,
lift the end of the feed screw.
Feed Screw
Caution: In assembling, move the planet gear to the
load/eject position before setting the feed screw
E in the inner holder.

F
Inner Holder

Planet Gear
52 DEH-P3500MP/XM/EW
1 2 3 4
5
5

1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
8 9 10 11
5 6 7

6
6

1 2 3 4
10A

POWER SUPPLY IP-BUS

ANTENNA JACK 1. FR+ 9. TEL MUTE 1. BUS+ WIRED
REMOTE
7.1.2 CONNECTOR FUNCTION DESCRIPTION

REAR OUTPUT 2. RR+ 10. NC 2. GND

3. FR- 11. B.REM 3. GND CONTROL
FRONT OUTPUT
4. RR- 12. NC 4. NC

DEH-P3500MP/XM/EW
5. FL+ 13. NC 5. BUS-
6. RL+ 14. ACC 6. GND

7
7

7. FL- 15. GND 7. BUS L+ INPUT

8. RL- 16. BACK UP 8. ASENB
9. BUS R+ INPUT
10. BUS R- INPUT
11. BUS L- INPUT

8
8

53
F
E
B
A

D
C
 1 2 3 4

7.2 PARTS
7.2.1 IC
A
- Pin Functions(PE5338A)
Pin No. Pin Name I/O Format Function and Operation
1 swvdd O C Grille : Chip enable output
2-4 NC Not used
5 TESTIN I Test program mode input
6 LCDPW O C LCD back light power supply control output
7 TELIN I Telephone mute input
8 ejectin I Eject sense input
9 FLPILM I Flap illumination input
10 DALMON I/O C For consumption low-current
11 reset I Reset input
12 XT2 Not used
B 13 XT1 I Clock connection pin
14 VSS GND
15 X2 Crystal oscillator connection pin
16 X1 I Crystal oscillator connection pin
17 REGOFF I Regulator operation specification signal
18 REGC Capacitor for regulator connect pin
19 VDD Power supply
20 ILMPW O Illumination power supply control output
21 SYSPW O C System power control output
22 adpw O C A/D converter power supply control output
23 NC Not used
24 IPPW O C Power supply control output for IP BUS interface IC
C
25 NC Not used
26 ROMDATA O C ROM correction data output
27 NC Not used
28 NC Not used
29-31 NC Not used
32 tunpce@ O PLL chip enable output2
33 VST O E.VOL : Strobe output
34 VCK O E.VOL : Clock output
35 VDT O E.VOL : Data output
36 ANTPW O Antenna power output
37 MUTE O C System mute output
D 38, 39 NC Not used
40 VSS GND
41 VDD Power supply
42 RDS57K I 57kHz count pulse input
43 NC Not used
44 rdslk I C RDS : Decoder clock input
45 RDT I RDS : Decoder data input
46 DORAON O C TUNER : 3V power supply
47-57 NC Not used
58 STRKEY2 I Steering remote controller input
59 CDLOEJ O C CD : Load Moter Load/Eject output
60 CLCONT O CD : Driver input switch output
E 61 CONT O C CD : Servo driver power supply control output
62 PCL O C Clock adjustment
63 CLAMPSW I Clamp SW input
64 VDCONT O C CD : VD power control output
65 xsck(TSCK) O CD LSI clock output
66 XSI(TSI) I CD LSI data input
67 XSO(TSO) O C CD LSI data output
68 XAO O C CD LSI command/data control output
69 xrst O C CD : LSI reset control output
70 xstb O CD LSI strobe output
71 ASENBO O IP-BUS : Slave power supply control output
72 NC Not used
F
73 TEST GND
74 SL I C TUNER : Signal level input
75 STRKEY1 I C Steering remote controller input

54 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

Pin No. Pin Name I/O Format Function and Operation A

76 NC Not used
77 CSENS I Flap close sense input
78 NC Not used
79 DSCSNS I CD : Disc insert sense input
80 VDSENS I CD : VD voltage sense input
81 TEMP I CD : Temperature sense input
82 AVDD A/D converter power supply terminal
83 AVREF A/D converter reference voltage terminal
84 AVSS GND
85 RX I IP-BUS : Data input
86 TX O IP-BUS : Data output
87 NMI GND B
88 ldet I PLL lock sense input
89 rck I RDS : Clock input
90 dsens I Grille detach sense input
91 PACK I PACK input
92 asens I ACC power sense input
93 bsens I Back up power sense input
94 TUNPDI I PLL IC data input
95 KYDT I Grille data input
96 DPDT O C Grille data output
97 TUNPCK O PLL clock output
98 TUNPDO O C PLL data output
C
99 TUNPCE O C PLL chip enable output
100 PEE O C Beep tone output

* PE5338A Format Meaning

50

31

C CMOS
51 30 IC's marked by * are MOS type.
Be careful in handling them because they are very
liable to be damaged by electrostatic induction.

80 1
BD4834G
100
81

N.C.

N.C.

5 4

Vref

1 2 3
VOUT

VDD

GND

DEH-P3500MP/XM/EW 55
5 6 7 8
 1 2 3 4

PAL007A
A

sw_vcc
Protector;
Over voltage

1
TAB Reference
amp_vcc

Stand-by

2
P-GND2 Circuit

+-
3
OUT2-
B
Offset Protector;
4

STBY Detection Thermal

-+
5

OUT2+
6

VCC

+-
7

OUT1-
Offset
8

P-GND1 Detection

-+
9

OUT1+
10

SVR
C
11

IN1
12 13

IN2

amp_vcc
Protector;
S-GND Short circuit
14

IN4
15

IN3
16

AC-GND
17

+-

OUT3+
18

Offset
D P-GND3 Detection
19

-+

OUT3-
20 21

VCC
+-

OUT4+
22

Offset
MUTE Detection
23

-+

OUT4-
24 25

P-GND4

SWITCH
E
sw_vcc
stby

Protector;
Over current limit

Mute circuit

56 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

- Pin Functions (PD6340A)

A
Pin No. Pin Name I/O Function and Operation
1-5 SEG4-0 O LCD segment output
6-9 COM3-0 O LCD common output
10 VLCD LCD drive power supply
11-14 KST3-0 O Key strobe output
15,16 KDT0,1 I Key data input (analogue input)
17 REM I Remote control reception input
18 DPDT I Display data input
19 NC Not used
20 KYDT O Key data output
21 MODA GND
22 X0 Crystal oscillator connection pin B
23 X1 Crystal oscillator connection pin
24 VSS GND
25,26 KDT2,3 I Key data input
27 NC Not used
28 KST4 O Key strobe output
29-32 NC Not used
33-55 SEG35-13 O LCD segment output
56 VDD Power supply
57-64 SEG12-5 O LCD segment output

*PD6340A C

48 33

49 32

D
64 17

1 16

DEH-P3500MP/XM/EW 57
5 6 7 8
 1 2 3 4

- Pin Functions (UPD63760GJ)

A Pin No. Pin Name I/O Function and Operation
1 R.GND GND for DRAM I/F
2 rst I Input of reset
3-7 AB12-8 I Address bus 12-8 from the microcomputer
8-15 AD7-0 I/O Address/data bus 7-0 to the microcomputer
16 cs I Chip selection
17 ASTB I Address strobe
18 read I Control signals (read)
19 write I Control signals (write)
20 wait O Control signals (wait)
21 INTQ Interruption signals to the external microcomputer
22 IFMODE I Switching between the data buses (16bit/8bit)
B
23 D.VDD Power supply for digital circuits
24 xtalen! I Permission to oscillate 16.9344MHz
25 xtalen@ I Permission to oscillate 24.576MHz
26 DA.VDD Power supply for DAC
27 ROUT O Output of audio for the right channel
28 DA.GND GND for DAC
29 R+ O Output of the right channel audio PWM
30 R- O Output of the right channel audio PWM
31 REGC Connected to the capacitor for band gap
32 L- O Output of the left channel audio PWM
33 L+ O Output of the left channel audio PWM
C 34 DA.GND GND for DAC
35 LOUT O Output of audio for the left channel
36 DA.VDD Power supply for DAC
37 X.VDD Power supply for the crystal oscillator
38 XTAL1 Connected to the crystal oscillator (16.9344MHz)
39 xtal! Connected to the crystal oscillator (16.9344MHz)
40, 41 X.GND Ground for the crystal oscillator
42 xtal@ Connected to the crystal oscillator (24.576MHz)
43 XTAL2 Connected to the crystal oscillator (24.576MHz)
44 X.VDD Power supply for the crystal oscillator
45 D.GND GND for digital circuits
46 DIN I Input of audio data
D 47 DOUT O Output of audio data
48 SCKIN I Clock input for audio data
49 SCKO O Clock output for audio data
50 LRCKIN I Input of LRCK for audio data
51 LRCK O Output LRCK for audio data
52 TESTX O Output for tests
53 RFOK O Output of RFOK
54 C16M O Output of 16.9344MHz
55 TESTEN I Connected to GND
56 TEST4 I Connected to GND
57 D.VDD Power supply for digital circuits
E 58 RFCK/HOLD O Output of RFCK/HOLD signal
59 WFCK/MIRR O Output of WFCK/MIRR signal
60 PLCK O Output of PLCK
61 LOCK O Output of LOCK
62 C1D1 O Information on error correction
63 C1D2 O Information on error correction
64 C2D1(RMUTE) O Information on error correction (mute for Rch)
65 C2D2(LMUTE) O Information on error correction (mute for Lch)
66 C2D3 O Information on error correction
67 D.GND Ground for digital circuits
68 ras O Output of DRAM RAS
69 cas) O Output of DRAM Lower CAS
F 70 cas! O Output of DRAM Upper CAS
71 we O Output of DRAM WE
72 oe O Output of DRAM OE

58 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

Pin No. Pin Name I/O Function and Operation

A
73-88 RDB0-15 I/O Input/output of DRAM Data0-15
89 D.GND Ground for digital circuits
90-99 RA0-9 O Output of DRAM Address0-9
100 D.VDD Power supply for digital circuits
101-104 TEST0-3 I Connected to GND
105 FD O Output of focus drive PWM
106 TD O Output of tracking drive PWM
107 SD O Output of thread drive PWM
108 MD O Output of spindle drive PWM
109 A.VDD Power supply for the analog system
110 ATEST O Analog tests
111 EFM O Output of EFM signals B
112 ASY I Input of asymmetry
113 C3T Connection to the capacitor for detecting 3T
114 A.GND Ground for the analog system
115 RFI I Input of RF
116 AGCO O Output of RF
117 AGCI I Input of AGC
118 RFO O Output of RF(AGC)
119, 120 EQ2, 1 Equalizer 2, 1
121 RF2- I Reversal input of RF2
122 RF- I Reversal input of RF
123 A.GND Ground for the analog system
124 A I Input of A C
125 C I Input of C
126 B I Input of B
127 D I Input of D
128 F I Input of F
129 E I Input of E
130 A.VDD Power supply for the analog system
131 REFOUT O Output of reference voltage
132 REFC Connected to the capacitor for output of REFOUT
133 FE- I Reversal input of FE
134 FEO O Output of FE
135 TE- I Reversal input of TE D
136 TEO O Output of TE
137 TE2 O TE2
138 TEC I TEC
139 A.GND Ground for the analog system
140 LDREGO O Output of REG voltage for APC
141 PD I Input of PD
142 LD O Output of LD
143 PN I Assignment of pickup polarity
144 A.VDD Power supply for the analog system

* UPD63760GJ
E
72

37

73 36

108 1 F
109

144

DEH-P3500MP/XM/EW 59
5 6 7 8
 1 2 3 4

- Pin Functions (PE5352B)

A Pin No. Pin Name I/O Format Function and Operation
1 BSO O C P-Bus serial data output
2 bsck I/O /C P-Bus serial clock input/output
3, 4 DFS1, 2 O C DA I/F IC sampling frequency setting output 1, 2
5 DCKS O C DA I/F IC clock subharmonic number selection output
6 EVDD E power supply Positive power supply
7 EVSS E power supply GND
8 dspok I DSP microcomputer initialization OK input
9 DCOPY O C DA I/F IC copy flag setting output
10 crst O C Compression IC reset control output
11, 12 NC Not used
13 EMPH O C Emphasis information output
B 14 emph O C Emphasis information output
15 DSPMUTE O C DOUT mute output
16 DSET O C Disc set indicator lighting output
17 adena O C A/D reference voltage supply control output
18 IC/VPP IC : VSS direct connection/VPP : Pull-down
19 BRXEN I/O /C P-Bus reception is possible
20 bsrq I/O /C P-Bus service request demand
21 xtalen! O C CD LSI 16.9344MHz oscillation permission output
22 xtalen@ O C CD LSI 24.576MHz oscillation permission output
23 xrst O C CD LSI reset control output
24 VDCONT O C VD power supply control output
C 25 CD3VON O C CD +3.3V power supply control output
26 CONT O C Servo driver power supply control output
27 xwait I CD LSI wait control signal input
28 LOEJ O C The direction change output of LOAD/EJECT
29 CLCONT O C Driver input change output
30 CDMUTE O C CD mute control output
31 reset I System reset input
32 XT1 I Connected to the oscillator for subclock
(connected to VSS via the resistor)
33 XT2 Connected to the oscillator for subclock (Open)
34 REGC Connected to the capacity stabilizing output of the regulator
(an electrolytic capacitor of about 1µF)
D 35 X2 Oscillator connection for mainclock
36 X1 I Oscillator connection for mainclock
37 VSS GND
38 VDD Positive power supply (5V)
39 CLKOUT O C Internal system clock output (Open)
40 xwrite O CD LSI write control signal output
41 uben O Not used (Open)
42 WR/W O WMA decoder Read/Write control signal output
43 xread O CD LSI read control signal output
44 XASTB O CD LSI address strobe output
45 LOCK I Spindle lock input
46 wrst O C WMA decoder reset control output
E
47-54 AD0-7 I/O /C Address/Data bus 0-7
55 BVDD B power supply Positive power supply (3.3V)
56 BVSS B power supply GND
57-64 AD8-15 I/O /C Address/Data bus 8-15
65 xcs O C CD LSI chip selection output
66 wcs O C WMA decoder chip selection output
67, 68 DBBWRDY0, 1 I Input of write-ready flag with WMA decoder DBBI0, 1
69, 70 DBBRRDY0, 1 I Input of read-ready flag with WMA decoder DBBO0, 1
71 AVDD A power supply Positive power supply (5V)
72 AVSS A power supply GND
73 AVREF The reference voltage input for A/D converter
F 74 VDSENS VD power supply short sense input
75 DSCSNS Disc state sense input
76 TEMP Temperature information sense input

60 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

Pin No. Pin Name I/O Format Function and Operation

A
77 HOME I Home SW sense input
78 csens I Flap closing sense input
79 RFOKIN I RFOK input chatter count input
80-82 NC Connected to AVDD or AVSS via the resistor
83 WMAARI I Input of sensing existence of WMA decoder and DA I/F IC
84 TYPE_A/D I CD-DA Analog/Digital output change setup
85 testin I Chip check test program starting input
86 NC Connected to EVDD or EVSS via the resistor
87 xint CD LSI interruption signal input
88 wint WMA decoder interruption signal input
89 brst I P-Bus reset input
90 ejsw I Eject key input B
91, 92 NC Open
93 CLAMP I C CLAMP SW sense input
94 ROMDATA I/O /C E2PROM data input/output
95 ROMCS O C E2PROM chip selection output
96 ROMCK O C E2PROM clock output
97 FRXD I For flash rewriting (received signal)
98 FTXD O C For flash rewriting (transmitted signal)
99 AO/DO O C The output for Analog/Digital voice output distinction
100 BSI I P-Bus serial data input

* PE5352B
Format Meaning C
50

26

C CMOS
51 25

75 1 D
100
76

MSM51V4265EP-70TS
DQ14
42 DQ15

40 DQ13

38 DQ12
37 DQ11
36 DQ10
43 DQ16

30 hcas
31 lcas
35 DQ9
39 VSS

23 VSS
44 VSS

32 NC

28 A8
27 A7
26 A6
25 A5
24 A4
29 oe
41

ucas : Upper column address strobe

lcas : Lower column address strobe

DQ1-DQ16 : Data input/data output

E
ras : Row address strobe
A0-A8 :Address input

VCC : Power supply

NC : No connection
oe : Output enable
we : Write enable

VSS : GND

22
14

17

20
21
10

13

15

18

19
16
2

7
1

3
4

8
9
VCC
DQ1
DQ2
DQ3
DQ4
VCC
DQ5
DQ6
DQ7
DQ8

NC
NC
we
ras
NC
A0
A1
A2
A3
VCC

DEH-P3500MP/XM/EW 61
5 6 7 8
 1 2 3 4

- FM/AM Tuner Unit

A
7 6 13 5 10 9 8 11 14 18 19 20 21

WC
CE2

ROM_VDD

SL

DI
CK
CE1

LDET

DO

RDS_CK

RDS_DATA

RDS_LOCK

RDS_HSLK
IC 3 EEPROM IC 5
←
5.0V 5V 3.3V

OSC LPF

AM ANT FMRF
1 ATT
Rch
24
IC 2
B IC 1 2.5V
FM ANT
3 3.3V
ATT Lch
23
FMRF MIXER, IF AMP DET, FM MPX,
RDS DECODER
RF adj
ANT adj

T51 CF52
CF51
AUDIOGND

IC 4
OSCGND

VDD_3.3

←
RFGND

3.3V 3.3V 2.5V 2.5V

DGND

VCC
NC

2 12 15 22 16 4 17
C

No. Symbol I/O Explain

1 AMANT I AM antenna input AM antenna input high impedance AMANT pin is connected with
an all antenna by way of 4.7µH. (LAU type inductor) A series circuit
including an inductor and a resistor is connected with RF ground for
the countermeasure against the ham of power transmission line.
2 RFGND RF ground Ground of antenna block
3 FMANT I FM antenna input Input of FM antenna 75Ω Surge absorber(DSP-201M-S00B) is necessary.
4 VCC power supply The power supply for analog block. D.C 8.4V ± 0.3V
5 SL O signal level Output of FM/AM signals level
6 CE2 I chip enable-2 Chip enable for EEPROM ”Low” active
D 7 WC I write control You can write EEPROM, when EEPROM write control is “Low”.
Ordinary non connection
8 CE1 I chip enable-1 Chip enable for AF•RF ”High” active
9 CK I clock Clock
10 DI I data in Data input
11 LDET O lock detector “Low” active
12 OSCGND osc ground Ground of oscillator block
13 ROM_VDD power supply Power supply for EEPROM pin 13 is connected with a power supply of
micro computer.
14 DO O data out Data output
15 DGND digital ground Ground of digital block
16 NC non connection Not used
E
17 VDD_3.3 power supply The power supply for digital block. 3.3V ± 0.2V
18 RDS_CK O RDS clock Output of RDS clock(2.5V)
19 RDS_DATA O RDS data Output of RDS data(2.5V)
20 RDS_LOCK O RDS lock Output unit “High” active(2.5V) (RDS_LOCK turns over by the
external transistor. “Low” active)
21 RDS_HSLK O RDS high speed Output unit “High” active(2.5V)(RDS_HSLK turns over by the
lock external transistor. “Low” active)
22 AUDIOGND audio ground Ground of audio block
23 L ch O L channel output FM stereo “L-ch” signal output or AM audio output
24 R ch O R channel output FM stereo “R-ch” signal output or AM audio output

62 DEH-P3500MP/XM/EW
1 2 3 4
 8 7 6 5
63 DEH-P3500MP/XM/EW
SEG39
SEG38
F
SEG37
SEG36
COMMON
SEGMENT

COM3 COM3
COM2 COM2
COM1 COM1
COM0 COM0
SEG35
SEG34
E SEG33
SEG32
SEG31
SEG30
SEG29
SEG28
SEG27
SEG26
SEG25
D
SEG24
SEG23
SEG22
SEG21
SEG20
SEG19
SEG18
SEG17
C
SEG16
SEG15
SEG14
SEG13
SEG12
SEG11
SEG10
SEG9
B SEG8
SEG7
SEG6
SEG5
SEG4
SEG3
SEG2
SEG1
SEG0
A
- LCD (CAW1757)
7.2.2 DISPLAY
8 7 6 5
 1 2 3 4

7.3 OPERATIONAL FLOW CHART

A Power ON

VDD=5V
Pin 41

bsens
Pin 93
B
bsens=L

asens
Pin 92

asens=L

dsens
Pin 90

C
dsens=L

ASENBO←H
Pin 71

CSENS
- CSENS <= 2V, 3V <
= CSENS
Pin 77
Last source returns.
2V < CSENS < 3V CD loading functions are available.
D Starts Keys except for EJECT key are not available.
communication
with Grille
microcomputer. 300ms

swvdd←H
Pin 1 300ms

In case of the above signal, the communication

with Grille microcomputer may fail.
Source keys
If the time interval is not 300msec, the oscillator
operative
may be defective.
E

Source ON

SYSPW←H
Pin 21

F
Completes power-on operation.
(After that, proceed to each source operation)

64 DEH-P3500MP/XM/EW
1 2 3 4
 5 6 7 8

7.4 CLEANING

Before shipping out the product, be sure to clean the

A
following portions by using the prescribed cleaning
tools:
Portions to be cleaned Cleaning tools
CD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008

DEH-P3500MP/XM/EW 65
5 6 7 8
 1 2 3 4

A 8. OPERATIONS

66 DEH-P3500MP/XM/EW
1 2 3 4
5 6 7 8

DEH-P3500MP/XM/EW 67
5 6 7 8
 1 2 3 4

A
Fixing the Front Panel
If you do not operate the Detaching and Replacing the Front Panel Function, use the supplied fixing screws
and fix the front panel to this unit.

1. Attach the holders to both sides of the front panel.

Holder
CND1250

B
Holder
CND1249

2. Replace the front panel to the unit.

3. Flip the holders into upright positions.

4. Fix the front panel to the unit using fixing screws.

Fixing screw
BPZ20P060FZK
E

68 DEH-P3500MP/XM/EW
1 2 3 4
 - CONNECTION DIAGRAM

8. Multi-CD player 21. Connecting cords with RCA pin plugs

10. Note: (sold separately)
Depending on the kind of vehicle, the function (sold separately)

5
5

5. IP-BUS cable
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*. 22. Power amp
1. This Product (sold separately)
1*

3* 2* 22. Power amp

(sold separately)
2. Rear output 6. IP-BUS input (Blue)

4. Antenna jack 9. Fuse 7. Jack for Wired Remote Control

5* 4*
3. Front output Please see the Instruction Manual for the
11. Connect leads of the same Wired Remote Control (sold separately).
color to each other.
23.Blue/white
To system control terminal of the power
12. Cap (1*)
When not using this terminal, amp (max. 300 mA 12 V DC).

6
6

do not remove the cap.

24. System remote control
25. Blue/white (7*)
To Auto-antenna relay control terminal
13. Yellow (3*) 14. Yellow (2*)
(max. 300 mA 12 V DC).
Back-up To terminal always supplied
(or accessory) with power regardless of
26. Blue/white (6*)
ignition switch position.
27. The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
15. Red (5*) 16. Red (4*) when Pin 5 is an antenna control type. In another
Accessory To electric terminal controlled type of vehicle, never connect 6* and 7*.
(or back-up) by ignition switch (12 V DC)

DEH-P3500MP/XM/EW
ON/OFF.

7
7

28. Front Speaker 28. Front Speaker

29. Left 30. Right
17. Black (ground)
To vehicle (metal) body.

31. Rear Speaker 31. Rear Speaker

20. Speaker leads

White : Front left + 32. Perform these connections when using
White/black : Front left ≠ the optional amplifier.
Gray : Front right +
18. ISO connector
Gray/black : Front right ≠
Note:
19. Yellow/black Green : Rear left +
In some vehicles, the ISO connector may be
Green/black : Rear left ≠
divided into two. In this case, be sure to If you use a cellular telephone, connect it via the

8
8

Violet : Rear right +

connect to both connectors. Audio Mute lead on the cellular telephone. If not,
Violet/black : Rear right ≠
keep the Audio Mute lead free of any connections.

69
F
E
B
A

D
C