6N137, VO2601, VO2611, VO2630, VO2631, VO4661: Vishay Semiconductors

6N137, VO2601, VO2611, VO2630, VO2631, VO4661
Vishay Semiconductors
High Speed Optocoupler, Single and Dual, 10 MBd

Single channel NC 1 A 2 C 3 NC 4 8 V CC 7 V E 6 VO 5 GND
FEATURES
Choice of CMR performance of 15 kV/s, 5 kV/s, and 100 V/s High speed: 10 MBd typical + 5 V CMOS compatibility Pure tin leads Guaranteed AC and DC performance over temperature: - 40 C to + 100 C temperature range Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements Low input current capability: 5 mA Compliant to RoHS Directive to 2002/95/EC and in accordance WEEE 2002/96/EC
6N137, VO2601, VO2611 Dual channel A1 1 C1 2 C2 3 A2

18921-30
8 VCC 7 V O1 6 V O2 5 GND
VO2630, VO2631, VO4661

V D E
18921-15
APPLICATIONS
Microprocessor system interface PLC, ATE input/output isolation Computer peripheral interface Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS High speed A/D and D/A conversion AC plasma display panel level shifting Multiplexed data transmission Digital control power supply Ground loop elimination UL1577, file no. E52744 system code H, double protection cUL - file no. E52744, equivalent to CSA bulletin 5A DIN EN 60747-5-5 (VDE 0884) available with option 1 BSI IEC 60950
DESCRIPTION
The 6N137, VO2601, and VO2611 are single channel 10 MBd optocouplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output. The VO2630, VO2631, and VO4661 are dual channel 10 MBd optocouplers. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/s for the VO2601 and VO2631 and 15 kV/s for the VO2611 and VO4661. The use of a 0.1 F bypass capacitor connected between pin 5 and 8 is recommended.
AGENCY APPROVALS
ORDERING INFORMATION
DIP-8 Option 6
T TAPE AND REEL

7.62 mm Option 7 10.16 mm
PART NUMBER
PACKAGE OPTION
> 0.7 mm
AGENCY CERTIFIED/PACKAGE BSI, UL, cUL DIP-8 DIP-8, 400 mil, option 6 SMD-8, option 7 VDE, BSI, UL, cUL DIP-8, 400 mil, option 6 SMD-8, option 7 0.1 6N137 6N137-X006 6N137-X007T 0.1 -
CHANNELS 1 CMR (kV/s) 5 VO2601 VO2601-X006 5 VO2601-X016 15 VO2611 VO2611-X006 15 VO2611-X016 0.1 VO2630 VO2630-X006 0.1 -
CHANNELS 2 CMR (kV/s) 5 VO2631 VO2631-X006 5 VO2631-X017T 15 VO4661 VO4661-X006 15 -
VO2601-X007T VO2611-X007T VO2630-X007T VO2631-X007T VO4661-X007T
VO2601-X017T VO2611-X017T
Document Number: 84732 Rev. 1.5, 08-Apr-11
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com 1
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6N137, VO2601, VO2611, VO2630, VO2631, VO4661

Vishay Semiconductors High Speed Optocoupler, Single and Dual,
10 MBd
TRUTH TABLE (positive logic)
LED On Off On Off On Off ENABLE H H L L NC NC
(1)
OUTPUT L H H H L H
ABSOLUTE MAXIMUM RATINGS

PARAMETER INPUT Average forward current (single channel) Average forward current (per channel for dual channel) Reverse input voltage Enable input voltage Enable input current Surge current Output power dissipation (single channel) Output power dissipation (per channel for dual channel) OUTPUT Supply voltage Output current Output voltage Output power dissipation (single channel) Output power dissipation (per channel for dual channel) COUPLER Isolation test voltage Storage temperature Operating temperature Lead solder temperature Solder reflow temperature (1)
(Tamb = 25 C, unless otherwise specified)

SYMBOL IF IF VR VE IE t = 100 s IFSM Pdiss Pdiss VALUE 20 15 5 VCC + 0.5 V 5 200 35 25 UNIT mA mA V V mA mA mW mW
TEST CONDITION
1 min maximum
VCC IO VO Pdiss Pdiss
7 50 7 85 60
V mA V mW mW
t=1s
VISO Tstg Tamb
5300 - 55 to + 150 - 40 to + 100 260 260
VRMS C C C C
for 10 s
Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP).
RECOMMENDED OPERATING CONDITIONS

PARAMETER Operating temperature Supply voltage Input current low level Input current high level Logic high enable voltage Logic low enable voltage Output pull up resistor Fanout www.vishay.com 2 TEST CONDITION SYMBOL Tamb VCC IFL IFH VEH VEL RL N MIN. - 40 4.5 0 5 2 0 330 MAX. 100 5.5 250 15 VCC 0.8 4K 5 UNIT C V A mA V V Document Number: 84732 Rev. 1.5, 08-Apr-11
RL = 1 k
6N137, VO2601, VO2611, VO2630, VO2631, VO4661

ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified)

PARAMETER INPUT Input forward voltage Reverse current Input capacitance OUTPUT High level supply current (single channel) High level supply current (dual channel) Low level supply current (single channel) Low level supply current (dual channel) High level output current Low level output voltage Input threshold current VE = 0.5 V, IF = 0 mA VE = VCC, IF = 0 mA IF = 0 mA VE = 0.5 V, IF = 10 mA VE = VCC, IF = 10 mA IF = 10 mA VE = 2 V, VO = 5.5 V, IF = 250 A VE = 2 V, IF = 5 mA, IOL (sinking) = 13 mA VE = 2 V, VO = 5.5 V, IOL (sinking) = 13 mA VE = 2 V VE = 0.5 V ICCH ICCH ICCH ICCL ICCL ICCL IOH VOL ITH 4.1 3.3 6.5 4 3.3 6.5 0.002 0.2 2.4 7 6 12 7 6 12 1 0.6 5 mA mA mA mA mA mA A V mA IF = 10 mA VR = 5 V f = 1 MHz, VF = 0 V VF IR CI 1.1 1.4 0.01 55 1.7 10 V A pF TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
High level enable current IEH - 0.6 - 1.6 mA IEL - 0.8 - 1.6 mA Low level enable current High level enable voltage VEH 2 V Low level enable voltage VEL 0.8 V Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements.
SWITCHING CHARACTERISTICS
PARAMETER Propagation delay time to high output level Propagation delay time to low output level Pulse width disortion Propagation delay skew Output rise time (10 % to 90 %) Output fall time (90 % to 10 %) Propagation delay time of enable from VEH to VEL Propagation delay time of enable from VEL to VEH TEST CONDITION RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V SYMBOL tPLH tPLH tPHL tPHL |tPHL - tPLH| tPSK tr tf tELH tEHL MIN. 20 25 TYP. 48 50 2.9 8 23 7 12 11 MAX. 75 (1) 100 75 (1) 100 35 40 UNIT ns ns ns ns ns ns ns ns ns ns
Notes Over recommended temperature (Tamb = - 40 C to + 100 C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. All typicals at Tamb = 25 C, VCC = 5 V. (1) 75 ns applies to the 6N137 only, a JEDEC registered specification
www.vishay.com 3
6N137, VO2601, VO2611, VO2630, VO2631, VO4661

10 MBd
VCC Single channel Pulse gen. Zo = 50 t f = t r = 5 ns Input IF monitoring node RM 1 IF 2 3 4 GND VCC 8 VE 7 VOUT 6 5 RL 0.1 F bypass Input IF Output VO monitoring node C L = 15 pF t PHL The probe and Jig capacitances are included in C L t PLH
18964-2
IF = 7.5 mA IF = 3.75 mA 0 mA VOH 1.5 V VOL
Output VO
Fig. 1 - Single Channel Test Circuit for tPLH, tPHL, tr and tf

Pulse gen. Zo = 50 t f = t r = 5 ns IF 1 Input monitoring node RM 2 3 4
18963-5
VCC Dual channel VCC 8 7 6 GND 5 0.1 F bypass RL Output VO monitoring node
CL= 15 pF
Fig. 2 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf

Pulse gen. Zo = 50 t f = t r = 5 ns 1 7.5 mA IF 2 3 4 GND Input VE monitoring node Single channel VCC 8 VE 7 VOUT 6 5 RL 0.1 F bypass Output VO monitoring node CL = 15 pF Input VE tEHL tELH Output VO 1.5 V 3V 1.5 V VCC
The probe and Jig capacitances are included in CL
18975-2
Fig. 3 - Single Channel Test Circuit for tEHL, and tELH
COMMON MODE TRANSIENT IMMUNITY

PARAMETER TEST CONDITION |VCM| = 10 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 C (1) |VCM| = 50 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 C (2) Common mode transient immunity (high) |VCM| = 1 kV, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 C (3) |VCM| = 10 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 C (1) |VCM| = 50 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 C (2) |VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 C (3) Notes (1) For 6N137 and VO2630 (2) For VO2601 and VO2631 (3) For VO2611 and VO4661 www.vishay.com 4 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 84732 Rev. 1.5, 08-Apr-11 SYMBOL |CMH| |CMH| |CMH| |CML| |CML| |CML| MIN. 100 5000 15 000 100 5000 15 000 10 000 25 000 10 000 25 000 TYP. MAX. UNIT V/s V/s V/s V/s V/s V/s
6N137, VO2601, VO2611, VO2630, VO2631, VO4661

VCC IF 1 B A VFF 2 3 4 GND Single channel VCC 8 VE 7 6 5 VO 0.5 V RL 0.1 F bypass Output VO monitoring node V CM 0 V VO 5 V VCM (PEAK) Switch AT A: IF = 0 mA VO (min.) Switch AT A: IF = 7.5 mA VO (max.) CMH
VOUT
CML
VCM + Pulse generator ZO = 50
18976-2
Fig. 4 - Single Channel Test Circuit for Common Mode Transient Immunity
IF Dual channel B 1 A 2 VFF 3 4 GND VCM + Pulse generator Z O = 50 7 6 5 VCC 8 VCC RL 0.1 F bypass Output VO monitoring node
18977-1
Fig. 5 - Dual Channel Test Circuit for Common Mode Transient Immunity
SAFETY AND INSULATION RATINGS

PARAMETER Climatic classification Comparative tracking index Peak transient overvoltage Peak insulation voltage Safety rating - power output Safety rating - input current Safety rating - temperature Creepage distance Clearance distance Creepage distance Clearance distance Insulation thickness, reinforced rated Standard DIP-8 Standard DIP-8 400 mil DIP-8 400 mil DIP-8 per BSI 60950 TEST CONDITION according to IEC 68 part 1 CTI VIOTM VIORM PSO ISI TSI 7 7 8 8 0.2 175 8000 890 500 300 175 SYMBOL MIN. TYP. 55/100/21 399 V V mW mA C mm mm mm mm mm MAX. UNIT
Note As per IEC 60747-5-5, 7.4.3.8.1, this optocoupler is suitable for safe electrical insulation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of prodective circuits.
www.vishay.com 5
6N137, VO2601, VO2611, VO2630, VO2631, VO4661

10 MBd
TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified)
ICCI - Low Level Supply Current (mA)
1.7
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 - 40 - 20 0 20 40 60 80 100 VCC = 5 V IF = 10 mA VCC = 7 V IF = 10 mA
VF - Forward Voltage (V)
1.6 1.5 1.4 1.3 1.2 1.1 1.0 - 40 - 20 IF = 10 mA
IF = 50 mA IF = 20 mA
IF = 1 mA
20
40
60
80
100
17610
Tamb - Ambient Temperature (C)
17614
Fig. 6 - Forward Voltage vs. Ambient Temperature
Fig. 9 - Low Level Supply Current vs. Ambient Temperature
1.60 1.55
ICCH - High Level Supply Current (mA)
3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 - 40 - 20 VCC = 5 V IF = 0.25 mA VCC = 7 V IF = 0.25 mA
VF - Forward Voltage (V)
1.50 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 0 5 10 15 20 25 30 35 40 45 50
20
40
60
80
100
17611
IF - Forward Current (mA)
17615
Fig. 7 - Forward Voltage vs. Forward Current
Fig. 10 - High Level Supply Current vs. Ambient Temperature
ITH - Input Threshold On Current (A)
2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 - 40 - 20 RL = 4 k RL = 1 k RL = 350
IR - Reverse Current (nA)
6 5 4 3 2 1 0 - 40 - 20 VR = 5 V
20
40
60
80
100
20
40
60
80
100
17613-1
17616
Fig. 8 - Reverse Current vs. Ambient Temperature
Fig. 11 - Input Threshold On Current vs. Ambient Temperature
www.vishay.com 6
6N137, VO2601, VO2611, VO2630, VO2631, VO4661

ITH - Input Threshold Off Current (A)
2.6 2.5 2.4 2.3 2.2 RL = 4 k 2.1 RL = 1 k 2.0 - 40 - 20 0 20 40 60 80 100 RL = 350
IOH - High Level Output Current (nA)
50 45 40 35 30 25 20 15 10 5 0 - 40 - 20 0 20 40 60 80 100
17617
17620
Fig. 12 - Input Threshold Off Current vs. Ambient Temperature
Fig. 15 - High Level Output Current vs. Ambient Temperature
VOL - Low Level Output Voltage (V)
0.30
5.5
Vo - Output Voltage (V)
0.25 0.20 0.15
VCC = 5.5 V IF = 5 mA
IL = 16 mA IL = 13 mA
5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 RL = 4 k 0
17621
IL = 10 mA 0.10 0.05 0.00 - 40 - 20 IL = 6 mA
RL = 350 RL = 1 k
0.0 0 20 40 60 80 100 1 2 3 4 5
17618
IF - Forward Input Current (mA)
Fig. 13 - Low Level Output Voltage vs. Ambient Temperature
Fig. 16 - Output Voltage vs. Forward Input Current
IOL - Low Level Output Current (mA)
tP - Propagation Delay Time (ns)
60 50 40 30 20 10 0 - 40 - 20 IF = 5 mA IF = 10 mA
120 tPLH, 4 k 100 80 60 40 20 0 - 40 - 20 tPLH, 350 tPLH, 1 k
tPHL, 350
tPHL, 1 k tPHL, 4 k
20
40
60
80
100
17622
20
40
60
80
100
17619
Fig. 14 - Low Level Output Current vs. Ambient Temperature
Fig. 17 - Propagation Delay vs. Ambient Temperature
www.vishay.com 7
6N137, VO2601, VO2611, VO2630, VO2631, VO4661

10 MBd
tP - Propagation Delay Time (ns)
120 100 80 tPLH, 350 60 40 20 0 5 7 9 11 13 15 tPHL, 350 tPHL, 1 k tPHL, 4 k tPLH, 1 k
300
tr, f - Rise and Fall Time (ns)
tPLH, 4 k
tr, RL = 4 k 250 200 150 100 tr, RL = 1 k 50 tr, RL = 350 0 20 40 60 80 100 tf, RL = 350 tf, RL = 1 k tf, RL = 4 k
0 - 40 - 20
17626
17623
Fig. 18 - Propagation Delay vs. Forward Current
Fig. 21 - Rise and Fall Time vs. Ambient Temperature
PWD - Pulse Width Distortion (ns)
50 40 30 20 RL = 1 k 10 0 - 40 - 20 RL = 350 RL = 4 k
300
tr, f - Rise and Fall Time (ns)
tr, RL = 4 k 250 200 150 100 tr, RL = 1 k 50 0 tr, RL = 350 5 7 9 11 13 15 tf, RL = 350 tf, RL = 1 k tf, RL = 4 k
20
40
60
80
100
17627
17624
Fig. 19 - Pulse Width Distortion vs. Ambient Temperature
Fig. 22 - Rise and Fall Time vs. Forward Current
PWD - Pulse Width Distortion (ns)
tE - Enable Propagation Delay (ns)
60 50 RL = 4 k 40 30 20 10 0 5 7 9 11 RL = 350 13 15 RL = 1 k
60 50 tELH = 4 k 40 30 20 10 tEHL = 1 k 0 - 40 - 20 0 tEHL = 4 k 20 40 60 80 100 tELH = 1 k tELH = 350 tEHL = 350
17625
17628
Fig. 20 - Pulse Width Distortion vs. Forward Current
Fig. 23 - Enable Propagation Delay vs. Ambient Temperature
www.vishay.com 8
6N137, VO2601, VO2611, VO2630, VO2631, VO4661

PACKAGE DIMENSIONS in millimeters
Pin one ID 4 6.645 0.165 3 2 1
ISO method A
9.77 0.14 0.95 0.19 7.62 typ. 0.79 4 typ. 3.555 0.255 6.095 0.255 1.27 0.70 0.19 0.51 0.05 2.54 typ.
i178006
10 3.045 0.255 3 to 9
0.25 0.05
Option 6
10.36 9.96 7.8 7.4
Option 7
7.62 typ.
Option 9
9.53 10.03
7.62 ref. 0.7
4.6 4.1 8 min.
0.102 0.249 0.25 typ. 0.51 1.02 15 max.
0.35 0.25 10.16 10.92
8.4 min. 8 min. 10.3 max.
18450
PACKAGE MARKING
VO2601 X017 V YWW H 68
21764-44
Notes Option 1 and VDE logos are only marked on option 1 parts. Tape and reel suffix (T) is not part of the package marking.
www.vishay.com 9
Legal Disclaimer Notice

Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customers technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1

6N137, VO2601, VO2611, VO2630, VO2631, VO4661: Vishay Semiconductors

Uploaded by

Copyright:

Available Formats

6N137, VO2601, VO2611, VO2630, VO2631, VO4661: Vishay Semiconductors

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

6N137, VO2601, VO2611, VO2630, VO2631, VO4661: Vishay Semiconductors

Uploaded by

Copyright:

Available Formats

6N137, VO2601, VO2611, VO2630, VO2631, VO4661

High Speed Optocoupler, Single and Dual, 10 MBd

6N137, VO2601, VO2611 Dual channel A1 1 C1 2 C2 3 A2

VO2630, VO2631, VO4661

T TAPE AND REEL

CHANNELS 2 CMR (kV/s) 5 VO2631 VO2631-X006 5 VO2631-X017T 15 VO4661 VO4661-X006 15 -

VO2601-X007T VO2611-X007T VO2630-X007T VO2631-X007T VO4661-X007T

Document Number: 84732 Rev. 1.5, 08-Apr-11

For technical questions, contact: optocoupleranswers@vishay.com