Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 140 views

    Cf53 DIN 1

    Uploaded by

    empty_
    This document summarizes the specifications of a linear bearing shaft material called CF 53-1.1213, including its: 1) Standard diameters that range from 5mm to 110mm with tolerances of h6 to h16. 2) Good hardening properties and excellent corrosion resistance when induction hardened to a surface hardness of 60-66 HRC. 3) Depth of hardness that ranges from 0.5mm to 3.2mm depending on the diameter of the shaft. 4) Additional information on non-standard sizes, mechanical properties, density, roundness, straightness and a contact address for the manufacturer.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Cf53 DIN 1

    Uploaded by

    empty_
    140 views1 page
    This document summarizes the specifications of a linear bearing shaft material called CF 53-1.1213, including its: 1) Standard diameters that range from 5mm to 110mm with tolerances of h6 to h16. 2) Good hardening properties and excellent corrosion resistance when induction hardened to a surface hardness of 60-66 HRC. 3) Depth of hardness that ranges from 0.5mm to 3.2mm depending on the diameter of the shaft. 4) Additional information on non-standard sizes, mechanical properties, density, roundness, straightness and a contact address for the manufacturer.

    Original Description:

    Original Title

    Cf53_DIN_1

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications of a linear bearing shaft material called CF 53-1.1213, including its: 1) Standard diameters that range from 5mm to 110mm with tolerances of h6 to h16. 2) Good hardening properties and excellent corrosion resistance when induction hardened to a surface hardness of 60-66 HRC. 3) Depth of hardness that ranges from 0.5mm to 3.2mm depending on the diameter of the shaft. 4) Additional information on non-standard sizes, mechanical properties, density, roundness, straightness and a contact address for the manufacturer.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    140 views1 page

    Cf53 DIN 1

    Uploaded by

    empty_
    This document summarizes the specifications of a linear bearing shaft material called CF 53-1.1213, including its: 1) Standard diameters that range from 5mm to 110mm with tolerances of h6 to h16. 2) Good hardening properties and excellent corrosion resistance when induction hardened to a surface hardness of 60-66 HRC. 3) Depth of hardness that ranges from 0.5mm to 3.2mm depending on the diameter of the shaft. 4) Additional information on non-standard sizes, mechanical properties, density, roundness, straightness and a contact address for the manufacturer.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Engineering Components

    O LLER N
    Linear Bearing Shaft with:
    Good hardening properties Excellent corrosion resistance

    Material Data Sheet


    CF 53 1.1213

    Non Standard Sizes


    Other hardness depths and diameter tolerances are available. Please contact us for detailed information, dimensions and minimum order quantities

    Standard Diameters
    Standard in mm 5 6 8 10 12 14 15 16 0 - 11 0 - 18 Tolerance in m h6 h7 0 -8 0 -9 0 -12 0 - 15 Production Length* in mm 3800 5800 6000 6200 6000 7000 6000 7200 0 - 13 0 - 21

    Selected for use in High Quality Linear Bearing Guide-way systems where Induction Hardened materials are required.

    Chemical Analysis:
    Designation Cf 53 C SI MN P S AI 0.50 0.15 0.40 Max. Max 0.02 0.57 0.35 0.70 0.025 0.035 0.05

    Mechanical Properties:
    Diameter mm > 17 > 17 41 > 41 110 Re N/mm = > 360 = > 325 = > 325 Rm N/mm = > 670 = > 630 = > 630 A % =>5 =>6 =>8

    18 20 22 25 30 32 35 36 40 45 50 60 70 80 100 0 - 19 0 - 22 0 - 30 0 - 35

    Density: 785 kg / m Roundness: Diameter tolerance Surface: Polished, surface finish Ra <= 0.30m Straightness: <10mm= < 0,30mm/m (TIR max. 0.6 mm/m) 10 20mm = 0.2 mm/m (TIR max. 0.4 mm/m) =>20mm 110mm = 0.1mm/m (TIR max 0.2 mm/m) Induction hardened: Surface Hardness 60 66 HRC Depth of Hardness at Diameter mm ends Rht 550 HV1 DIN 501 90 =<5 > = 0.50 mm > 5 10 0.50 mm + 0.50 mm > 10 18 0.80 mm + 0.50 mm > 18 28 1.20 mm + 0.80 mm > 28 60 1.50 mm + 1.00 mm > 60 - 80 2.20 mm + 1.00 mm >80 3.20 mm + 1.50 mm

    0 - 16

    0 - 25

    7600

    7000

    *) Length tolerance + 200 mm. At each end of a production bar up to 60mm length may not be fully hardened and up to 150mm not within tolerance. When providing material for stock this may amount to 10%, we do not invoice this.

    ______________________________________
    Your Contact Address for ZOLLERN Engineering Components: ZOLLERN GmbH & Co. KG Werk Aulendorf Postfach 12 65 D-88322 Aulendorf Phone ++49 ( 75 25) 948-0 Telefax ++49 (75 25) 948-100 mailto:zmb@zollern.de http://www.zollern.de

    You might also like