Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 33 views

    Wireless Audio Link IC

    Uploaded by

    motngaymoibatdau1986
    The document provides information about the BH1415F wireless audio link integrated circuit (IC). The IC consists of a stereo modulator that generates a composite signal containing the main, sub, and pilot signals from a 38kHz oscillator. The composite signal is then transmitted via FM radio waves by a FM transmitter circuit that modulates a carrier signal. The IC has features like a pre-emphasis circuit, limiter circuit, low-pass filter circuit, and a built-in pilot-tone FM stereo modulator circuit. An internal phase-locked loop (PLL) system provides a stable transmission frequency. The IC can be controlled via serial input signals and is designed for applications such as car audio systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Wireless Audio Link IC

    Uploaded by

    motngaymoibatdau1986
    33 views4 pages
    The document provides information about the BH1415F wireless audio link integrated circuit (IC). The IC consists of a stereo modulator that generates a composite signal containing the main, sub, and pilot signals from a 38kHz oscillator. The composite signal is then transmitted via FM radio waves by a FM transmitter circuit that modulates a carrier signal. The IC has features like a pre-emphasis circuit, limiter circuit, low-pass filter circuit, and a built-in pilot-tone FM stereo modulator circuit. An internal phase-locked loop (PLL) system provides a stable transmission frequency. The IC can be controlled via serial input signals and is designed for applications such as car audio systems.

    Original Title

    Data Sheet

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information about the BH1415F wireless audio link integrated circuit (IC). The IC consists of a stereo modulator that generates a composite signal containing the main, sub, and pilot signals from a 38kHz oscillator. The composite signal is then transmitted via FM radio waves by a FM transmitter circuit that modulates a carrier signal. The IC has features like a pre-emphasis circuit, limiter circuit, low-pass filter circuit, and a built-in pilot-tone FM stereo modulator circuit. An internal phase-locked loop (PLL) system provides a stable transmission frequency. The IC can be controlled via serial input signals and is designed for applications such as car audio systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    33 views4 pages

    Wireless Audio Link IC

    Uploaded by

    motngaymoibatdau1986
    The document provides information about the BH1415F wireless audio link integrated circuit (IC). The IC consists of a stereo modulator that generates a composite signal containing the main, sub, and pilot signals from a 38kHz oscillator. The composite signal is then transmitted via FM radio waves by a FM transmitter circuit that modulates a carrier signal. The IC has features like a pre-emphasis circuit, limiter circuit, low-pass filter circuit, and a built-in pilot-tone FM stereo modulator circuit. An internal phase-locked loop (PLL) system provides a stable transmission frequency. The IC can be controlled via serial input signals and is designed for applications such as car audio systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    BH1415F

    Audio ICs

    Wireless Audio Link IC


    BH1415F
    The BH1415F is a FM stereo transmitter IC that transmits simple configuration. The IC consists of a stereo modulator for generating stereo composite signals and a FM transmitter for broadcasting a FM signal on the air. The stereo modulator generates a composite signal which consists of the MAIN, SUB, and pilot signal from a 38kHz oscillator. The FM transmitter radiates FM wave on the air by modulating the carrier signal with a composite signal.

    !Applications CD changer, Car TV, Car navigation, Wireless speakers, Personal computer (sound board), Game machine

    !Features 1) It is possible to improve the timbre because it has the pre-emphasis circuit, limiter circuit, and the low-pass filter circuit. 2) Built-in pilot-tone system FM stereo modulator circuit. 3) The transmission frequency is stable because it has a PLL system FM transmitter circuit. 4) PLL data input (CE, CK, DA) by serial input.

    !Absolute maximum ratings (Ta = 25C, In measurement circuit.)


    Parameter Supply voltage Symbol VCC Limits +7.0 0.3 to VCC+0.3 0.3 to VCC+0.3 450

    Unit V V V mW Pin8,12

    Conditions

    Data input voltage Phase comparator output voltage


    Power dissipation Storage temperature

    VIN-D VOUT-P
    Pd Tstg

    Pin15,16,17,18 Pin7

    55 to +125

    Derating : 4.5mW/C for operation above Ta=25C.

    !Recommended operating conditions (Ta = 25C)


    Parameter Operating supply voltage Symbol VCC Min. 4.0 40 20 70 0.8VCC GND Typ. Max. 6.0 +85 10 15k 155 120 VCC 0.2VCC Unit V C dBV Hz sec MHz V V Pin1,22 Pin1,22 Pin2,21 Pin9,11 Pin15,16,17,18 Pin15,16,17,18

    Conditions
    Pin8,12

    Operating temperature Audio input level Audio input frequency band Pre-emphasis time constant set up range Transmission frequency Control terminal "H" level input voltage Control terminal "L" level input voltage

    Topr
    VIN-A

    fIN-A t PRE fTX VIH VIL

    1/3

    Audio ICs

    !Block diagram

    22

    R-ch INPUT
    21 2
    + +

    L-ch INPUT PRE-EMPHASIS TIME CONSTANT LPF TIME CONSTANT PILOT SIGNAL ADJUST AUDIO MUTING

    PRE-EMPHASIS TIME CONSTANT


    20 3
    LPF LPF

    Pre-emphasis and Limiter

    LPF TIME CONSTANT


    19
    VCC 2

    4
    MPX

    FILTER
    18 5 +
    MUTE

    COMPOSITE SIGNAL OUTPUT


    6 7
    1 2 Phase detector VCC GND

    17

    GND PLL PHASE DETECTOR OUTPUT


    8
    1 19

    DATA
    16

    Shift register

    CLOCK
    15

    VCC
    9
    OSC

    CHIP ENABLE
    1 50

    14

    RF OSCILLATOR
    10
    RF

    X'tal OSCILLATOR
    13
    1 4

    Program counter

    RF GND

    RF GND
    11

    X'tal OSCILLATOR
    12
    PLL VCC

    RF OUTPUT

    PLL VCC

    BH1415F

    2/3

    BH1415F
    Audio ICs

    No.

    Control unit / Data

    Contents

    (2)

    MULTIPLEXER

    It changes a stereo and monaural operation. MONO 0 1 Condition of the composite signal Monaural operation L+R , Pilot OFF Stereo operation s L+R+(L-R),sinst+Psin 2 t

    MONO

    (2)

    PHASE DETECTOR

    It controls charge pump output by the phase comparator compulsorily. PD0 0 0 1 1 PD1 0 1 0 1 Charge pump output Usual operation Compulsion by Low Compulsion by High High impedance

    PD0, PD1

    (3)

    TEST MODE

    It is data for the LSI test. Always in T0 Input "1".

    T0, T1

    Always in T1 Input "0".

    !External dimensions (Units : mm)

    13.6 0.2 22 12

    7.8 0.3

    5.4 0.2

    1.8 0.1

    11

    0.11

    1.27

    0.4 0.1

    0.3Min. 0.15

    SOP22

    0.15 0.1

    3/3

    Appendix

    Notes
    No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design.

    The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

    Appendix1-Rev1.0

    You might also like