CH 02
CH 02
2 8
Theory of Machines
Features
1. 1ntroduction.
Kinematics of
2. Plane Motion. 3. Rectilinear Motion. 4. Curvilinear Motion. Motion 5. Linear Displacement. 6. Linear Velocity. 7. Linear Acceleration. 2.1. Introduction 8. Equations of Linear Motion. 9. Graphical Representation of Displacement with respect to Time. 10. Graphical Representation of Velocity with respect to Time. 11. Graphical Representation of Acceleration with respect to
We have discussed in the previous Chapter, that the subject of Theory of Machines deals with the motion and forces acting on the parts (or links) of a machine. In this chap- ter, we shall first discuss the kinematics of motion i.e. the relative motion of bodies without consideration of the forces causing the motion. In other words, kinematics deal with the geometry of motion and concepts like displacement, velocity Time.
and acceleration considered as functions of time. 12. Angular Displacement. 13. Representation of Angular Displacement by a Vector.
plane, the motion is said to be plane motion. The plane mo- tion may be either rectilinear or curvilinear. 16. Equations of Angular Motion.
2.3. Rectilinear Motion 17. Relation Between Linear Motion and Angular Motion. 18. Relation Between Linear and
It is the simplest type of motion and is along a straight line path. Such a motion is also known as translatory motion.
Angular Quantities of Motion. 19. Acceleration of a Particle along a Circular Path.
9
about a fixed shaft or a shaft rotating about its own axis, then the motion is said to be a plane rotational motion. Note: The motion of a body, confined to one plane, may not be either completely rectilinear nor completely rotational. Such a type of motion is called combined rectilinear and rotational motion. This motion is dis- cussed in Chapter 6, Art. 6.1.
= d dt s
... 3 v = ds dt
Notes: 1. The linear acceleration may also be expressed as follows: a = dv dt = ds dt dv ds = v dv ds 2. The negative acceleration is also known as deceleration or retardation. Spindle (axis of rotation)
10
Theory of Machines 2.8.2.8.2.8.2.8.2.8. Equations Equations Equations Equations Equations of of of of of Linear Linear Linear Linear Linear Motion Motion Motion
Motion Motion The following equations of linear motion are important from the subject point of view: 1. v = u + a.t 2. s = u.t +
12
)
t = v av t where u = Initial velocity of the body, v = Final velocity of the body, a = Acceleration of the body, s = Displacement of the body in time t seconds, and v
av = Average velocity of the body during the motion. Notes: 1. The above equations apply for uniform acceleration. If, however, the acceleration is variable, then it must be expressed as a function of either t, s or v and then integrated. 2. In case of vertical motion, the body is subjected to gravity. Thus g (acceleration due to grav- ity) should be substituted for a in the above equa- tions. 3. The value of g is taken as + 9.81 m/s2 for downward motion, and 9.81 m/s2 for upward mo- tion of a body. 4. When a body falls freely from a height h, then its velocity v, with which it will hit the ground is given by
v = 2 g . h 2.9.2.9.2.9.2.9.2.9. GraGraGraGraGraphical phical phical phical phical Repr Repr Representaesentaesentaesentaesentation Repr Repr tion tion tion tion of of of of of Displacement Displacement Displacement Displacement Displacement with with with with with Respect Respect Respect Respect Respect to to to to to TimeTimeTimeTimeTime The displacement of a moving body in a given time may be found by means of a graph. Such a graph is drawn by plotting the displacement as ordinate and the corresponding time as abscissa. We shall discuss the following two cases :
1. When the body moves with uniform velocity. When the body moves with uniform velocity, equal distances are covered in equal intervals of time. By plotting the distances on Y-axis and time on X-axis, a displacement-time curve (i.e. s-t curve) is drawn which is a straight line, as shown in Fig. 2.1 (a). The motion of the body is governed by the equation s = u.t, such that Velocity at instant 1 = s
/t 1 Velocity at instant 2 = s
2
= tan where tan is called the slope of s-t curve. In other words, the slope of the s-t curve at any instant gives the velocity.
t = time v = velocity (downward) g = 9.81 m/s2 = acceleration t = 0 s due to gravity v = 0 m/s t = 1 s v = 9.81 m/s t = 2 s v = 19.62 m/s
11
2. When the body moves with variable velocity. When the body moves with variable velocity, unequal distances are covered in equal intervals of time or equal distances are covered in unequal intervals of time. Thus the displacement-time graph, for such a case, will be a curve, as shown in Fig. 2.1 (b). (a) Uniform velocity. (b) Variable velocity. Fig. 2.1. Graphical representation of displacement with respect to time. Consider a point P on the s-t curve and let this point travels to Q by a small distance s in a small interval of time t. Let the chord joining the points P and Q makes an angle with the horizontal. The average velocity of the moving point during the interval PQ is given by tan = s / t . . . (From triangle PQR ) In the limit, when t approaches to zero, the point Q will tend to approach P and the chord PQ becomes tangent to the curve at point P. Thus the velocity at P, v
p
= tan = ds /dt where tan is the slope of the tangent at P. Thus the slope of the tangent at any instant on the s-t curve gives the velocity at that instant.
12
Theory of Machines
Let u = Initial velocity of a moving body, and v = Final velocity of a moving body after time t. Then, tan = BC AC = v t Change u = Time in velocity = Acceleration ( a )
(a) Uniform velocity. (b) Variable velocity.
Fig. 2.2. Graphical representation of velocity with respect to time. Thus, the slope of the v-t curve represents the acceleration of a moving body. Now a = tan = BC AC = vt u or v = u + a.t Since the distance moved by a body is given by the area under the v-t curve, therefore distance moved in time (t), s = Area OABD = Area OACD + Area ABC =u.t+12(vu)t=u.t+
12
at . 2
... (3 v u = a.t)
Fig. 2.3. Graphical representation of acceleration with respect to time. We shall consider the following two cases : 1. When the body moves with uniform acceleration. When the body moves with uniform acceleration, the acceleration-time curve (a-t curve) is a straight line, as shown in Fig. 2.3(a). Since the change in velocity is the product of the acceleration and the time, therefore the area under the a-t curve (i.e. OABC) represents the change in velocity.
2. When the body moves with variable acceleration. When the body moves with variable acceleration, the at curve may have any shape depending upon the values of acceleration at various instances, as shown in Fig. 2.3(b). Let at any instant of time t, the acceleration of moving body is a. Mathematically, a = dv / dt or dv = a.dt
13
Integrating both sides,
22 11
a dt or v v = t
t 1 2
a . dt where v
1
.
21
and v
2
and t
2
respectively. The right hand side of the above expression represents between represents the the time change intervals in velocity t
1
and of t 2 the . Thus the area under the the a-t area curve (PQQ between 1 P
1
) under any two the ordinates a-t curve moving body. If the initial and final velocities of the body are u and v, then the above expression may be written as vu=0t adt . = Area under a-t curve AB = Area OABC Example 2.1. A car starts from rest and accelerates uniformly to a speed of 72 km. p.h. over a distance of 500 m. Calculate the acceleration and the time taken to attain the speed.
If a further acceleration raises the speed to 90 km. p.h. in 10 seconds, find this acceleration and the further distance moved. The brakes are now applied to bring the car to rest under uniform retardation in 5 seconds. Find the distance travelled during braking. Solution. Given : u = 0 ; v = 72 km. p.h. = 20 m/s ; s = 500 m First of all, let us consider the motion of the car from rest. Acceleration of the car Let a = Acceleration of the car. We know that v2 = u2 + 2 a.s (20)2 = 0 + 2a 500 = 1000 a or a = (20)2/ 1000 = 0.4 m/s2 Ans. Time taken by the car to attain the speed Let t = Time taken by the car to attain the speed. We know that v = u + a.t 20 = 0 + 0.4 t or t = 20/0.4 = 50 s Ans. Now consider the motion of the car from 72 km.p.h. to 90 km.p.h. in 10 seconds. Given : * u = 72 km.p.h. = 20 m/s ; v = 96 km.p.h. = 25 m/s ; t = 10 s Acceleration of the car Let a = Acceleration of the car. We know that v = u + a.t 25 = 20 + a 10 or a = (25 20)/10 = 0.5 m/s2 Ans. Distance moved by the car We know that distance moved by the car, s = ut . + 1 2 at . 2 = 20 10 + 1 2 0.5(10) 2 = 225m Ans.
* It is the final velocity in the first case.
14
Theory of Machines
Now consider the motion of the car during the application of brakes for brining it to rest in 5 seconds. Given : *u = 25 m/s ; v = 0 ; t = 5 s We know that the distance travelled by the car during braking, s=u+2v t = 25 2 + 0 5 = 62.5m Ans. Example 2.2. The motion of a particle is given by a = t3 3t2 + 5, where a is the acceleration in m/s2 and t is the time in seconds. The velocity of the particle at t = 1 second is 6.25 m/s, and the displacement is 8.30 metres. Calculate the displacement and the velocity at t = 2 seconds. Solution. Given : a = t3 3t2 + 5 We know that the acceleration, a = dv/dt. Therefore the above equation may be written as dv dt =t33t
2
4
t3
=++=++ is the first constant of integration. We know that when t = 1 s, v = 6.25 m/s. Therefore substituting these values of t and v in equation (i), 6.25 = 0.25 1 + 5 + C
1
= 4.25 + C
or C
1
in equation (i), v=t 4 34 t + 5 t + 2 ...(ii) Velocity at t = 2 seconds Substituting the value of t = 2 s in the above equation, v=244 23 + 5 2 + 2 = 8 m/s Ans. Displacement at t = 2 seconds We know that the velocity, v = ds/dt, therefore equation (ii) may be written as ds dt
4 t3 +5t+2
is these the second values constant of of integration. We know that when t = 1 s, s = 8.30 m. Therefore
=4
* It is the final velocity in the second case.
15
Substituting the value of C
2
in equation (iii), s = t 5 20 t 4 4 + 5 2t
2
+ 2 2 + 4 = 15.6m Ans. Example 2.3. The velocity of a train travelling at 100 km/h decreases by 10 per cent in the first 40 s after applica- tion of the brakes. Calculate the velocity at the end of a further 80 s assuming that, during the whole period of 120 s, the re- tardation is proportional to the velocity. Solution. Given : Velocity in the beginning (i.e. when t = 0), v
0
= 100 km/h Since the velocity decreases by 10 per cent in the first 40 seconds after the application of brakes, therefore velocity at the end of 40 s, v
40
= Velocity at the end of 120 s (or further 80s). Since the retardation is proportional to the velocity, therefore, a = dv dt = k.v dv v k dt where k is a constant of proportionality, whose value may be determined from the given conditions. Integrating the above expression, log
or = . v = k.t + C ... (i) where C is the constant of integration. We know that when t = 0, v = 100 km/h. Substituting these values in equation (i), log
e
100 = C or C = 2.3 log 100 = 2.3 2 = 4.6 We also know that when t = 40 s, v = 90 km/h. Substituting these values in equation (i), log
e
90 = k 40 + 4.6 ...( 3 C = 4.6 ) 2.3 log 90 = 40k + 4.6 or k = 4.6 2.3log90 40 = 4.6 2.3 40 1.9542 = 0.0026 Substituting the values of k and C in equation (i), log
e
v = 0.0026 t + 4.6 or 2.3 log v = 0.0026 t + 4.6 ... (ii) Now substituting the value of t equal to 120 s, in the above equation, 2.3 log v
120
16
Theory of Machines
Example 2.4. The acceleration (a) of a slider block and its displacement (s) are related by the expression, a = k s , where k is a constant. The velocity v is in the direction of the displacement and the velocity and displacement are both zero when time t is zero. Calculate the displacement, velocity and acceleration as functions of time. Solution. Given : a = k s We know that acceleration, a=v dv ds or ks=v dv ds
... 3 dv dt = ds dt dv ds = v dv ds
v22k. s
3/2
3/2
C1
v
v . dv = k s ds or =+ is the first constant of integration whose value is to be determined from the given conditions of motion. We know that s = 0, when v = 0. Therefore, substituting the values of s and v in equation (i), we get C
1
= 0.
2 3/2
v4 k3 s ... (ii) Displacement, velocity and acceleration as functions of time We know that v2= 23 k. s or =
3/4
ds dt =v=4 k3 s
3/4 ... [From equation (ii)]
ds s 3/4
=4 3k dt or
s 3/4
ds = 4 k3
0 t dt s 1/4 1/4 4 k3 tC2 ...(iii) where C
2
=+ is the second constant of integration. We know that displacement, s = 0 when t = 0. There- fore, substituting the values of s and t in equation (iii), we get C
2
k 144 2 . t4
t 36 Ans. a = dv dt = 36 k 2 3 t
2
= k2. t
2
12 Ans.
k 36 2 . t3
17
Example 2.5. The cutting stroke of a planing machine is 500 mm and it is completed in 1 second. The planing table accelerates uniformly during the first 125 mm of the stroke, the speed remains constant during the next 250 mm of the stroke and retards uniformly during the last 125 mm of the stroke. Find the maximum cutting speed. Solution. Given : s = 500 mm ; t = 1 s ; s
1
= 250 mm ; s
3
= 125 mm Fig. 2.4 shows the acceleration-time and veloc- ity-time graph for the planing table of a planing machine. Let v = Maximum cutting speed in mm/s. Average velocity of the table during acceleration and retardation,
v av
=vs
av 1
=s
v2
=vs
av 3
= 125 v /2 = 250 v s Fig. 2.4 Since the time taken to complete the stroke is 1 s, therefore
t1+t2+t3