Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 708 views

    Anchor Bolt

    Uploaded by

    sherwinpons2003
    This document provides specifications for designing anchor bolts to resist shear and tension forces. It lists allowable stresses for anchor bolts made of ASTM 307 and 325 steel with 7-10 threads per inch. It also provides a sample design check for bolt stresses, required bolt lengths, and checks that actual stresses do not exceed allowable values. The document recommends reducing the grout thickness.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd

    Anchor Bolt

    Uploaded by

    sherwinpons2003
    708 views2 pages
    This document provides specifications for designing anchor bolts to resist shear and tension forces. It lists allowable stresses for anchor bolts made of ASTM 307 and 325 steel with 7-10 threads per inch. It also provides a sample design check for bolt stresses, required bolt lengths, and checks that actual stresses do not exceed allowable values. The document recommends reducing the grout thickness.

    Original Description:

    spreadsheet

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for designing anchor bolts to resist shear and tension forces. It lists allowable stresses for anchor bolts made of ASTM 307 and 325 steel with 7-10 threads per inch. It also provides a sample design check for bolt stresses, required bolt lengths, and checks that actual stresses do not exceed allowable values. The document recommends reducing the grout thickness.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    708 views2 pages

    Anchor Bolt

    Uploaded by

    sherwinpons2003
    This document provides specifications for designing anchor bolts to resist shear and tension forces. It lists allowable stresses for anchor bolts made of ASTM 307 and 325 steel with 7-10 threads per inch. It also provides a sample design check for bolt stresses, required bolt lengths, and checks that actual stresses do not exceed allowable values. The document recommends reducing the grout thickness.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    ANCHOR BOLT DESIGN FOR SHEAR AND TENSION Anchor bolt specs ASTM 307 Yield stress, Fy ASTM

    325 Yield stress, Fy Number of thread per inch, n m (min of 10mm, max of 50mm) Allowable stresses Fb 136.52 Mpa Ft 136.52 Mpa Fv 68.26 Mpa Shear: V fc' D ls Tension T u lt l Check for bolt stresses Ag At Allowable tension stress, Ft fv ft Bending moment due to shear M fb Distance, s from rebar Length of bend

    33 ksi 7 10 mm

    227.527 Mpa

    5.00 20.68 12.70 152.35 5.00 3.58 35.00 187.35

    kN MPa mm mm kN Mpa mm mm

    126.60 mm2 94.95 mm2 39.50 Mpa 52.66 Mpa ok ok

    50.00 kN-mm 248.851 Mpa 62.45 mm 100.00 mm

    reduce grout thickness

    NOMENCLATURE Fy Yield stress of anchor bolt, Mpa Fv Allowable shear stress, Mpa Ft Allowable tensile stress, Mpa Fb Allowable bending stress, Mpa Ac Area of concrete in compression, mm2 D Diameter of anchor bolt, mm V Shear force per anchor bolt, kN T Tensile force per bolt, kN Ag Gross section area of anchor bolt, mm2 At Tensile stress area of anchor bolt, mm2 Fp Allowable bearing stress on concrete, Mpa fc' Compressive strength of concrete at 28 days, Mpa ls Length of anchor bolt required to resist shear force, mm lt Length of anchor bolt required to resist tension force, mm l Total length of embedment required, mm u Allowable bond stress of concrete, Mpa fv Actual shear stress in anchor bolt, Mpa ft Actual tensile stress in anchor bolt, Mpa n Number of threads per inch for anchor bolt m thickness of grout, mm M Shear moment, kN-mm

    You might also like