MATERIAL SAFETY DATA SHEET 1.

CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: PRODUCT CODE: 6% COBALT LIN-ALL P.I. DRIER 115102
DATE REVISED: 03/10/2009 DATE PRINTED: 03/10/2009

MANUFACTURING LOCATION:
OMG AMERICAS, INC. TWO MILE RUN ROAD VENANGO COUNTY, FRANKLIN, PA 16323 PLANT TELEPHONE NUMBER: 814-432-2125 CUSTOMER SERVICE, R&D AND SALES: 440-899-2950

CHEMICAL FAMILY/USE: Metal Carboxylate IN CASE OF EMERGENCY CONTACT:

CHEMTREC: 800-424-9300 (24 HOURS A DAY, 7 DAYS A WEEK) OUTSIDE THE US: + (703)-527-3887 (COLLECT CALLS ACCEPTED) HMIS: HEALTH: FLAMMABILITY: REACTIVITY: PERSONAL PROTECTION: *Chronic health hazard 1* 1 0 B

2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: Purple liquid. May cause sensitization by skin contact which may produce allergic contact dermatitis. May cause sensitization by inhalation which may produce occupational asthma. May cause eye, skin and respiratory tract irritation. May be harmful if inhaled or swallowed. May cause eye irritation. Based on data for Cobalt metal powder, may cause allergic contact dermatitis if there is prior sensitization. Most rashes associated with cobalt occur on the hands and appear within the first year of occupational exposure to cobalt. Although no data exists for this product, Cobalt metal powder is a known allergen that produces characteristic symptoms of asthma, such as wheezing, dry cough, and labored breathing. Usually the asthma symptoms appear 4-6 hours after exposure and often worsen again later in the same day. Even later asthma reactions to inhaled cobalt may occur up to 48 hours after exposure. Improvement typically occurs when cobalt exposure ceases, e.g. weekends, vacations. Other cobalt-containing compounds such as hard metal dust, but not cobalt powder itself, are associated with subacute fibrosis alveolitis and chronic diffuse interstitial pulmonary fibrosis. May be harmful if swallowed.

EYE CONTACT: SKIN CONTACT:

INHALATION:

INGESTION:

6% COBALT LIN-ALL P.I. DRIER

PRODUCT CODE: 115102

Page 1 of 6

3. COMPOSITION/INFORMATION ON INGREDIENTS
CHEMICAL NAME: Cobalt Tallate 61789-52-4 Petroleum Hydrocarbon 64741-44-2 Residual Oil, Dewaxed 64742-62-7 Dipropylene Glycol 25265-71-8 PERCENT: ACGIH TLV: ACGIH STEL: 70 20 8 2 0.02 5* NE NE NE 10* NE NE OSHA PEL: OSHA STEL: 0.1+ 5* NE NE NE NE NE NE Units that the TWAs and STELs are in: mg/m3 mg/m3

+For metal dust and fume, as Co *For oil mist, if generated JAPANESE ENCS NUMBER(S): Cobalt Tallate: (8)-340 Heavy Distillates: (9)-1689 Dipropylene Glycol: (2)-413 JAPANESE INDUSTRIAL SAFETY HYGIENE AND LABOR (ISHL): Cobalt Tallate is regulated under ISHL, number 173, as Cobalt Compounds.

4. FIRST AID MEASURES

EYES: Flush immediately with large amounts of water and continue flushing for 15 minutes or until irritation subsides, whichever is longer. SKIN: Wash thoroughly with soap and plenty of clean water. If irritation occurs, contact a physician. INHALATION: Move the exposed person to fresh air at once. If indicated, a qualified pre-hospital medical provider (such as a first responder or EMT) may give oxygen. Contact a physician. INGESTION: Aspiration hazard. Do not induce vomiting or give anything by mouth because this material can enter the lungs and cause severe lung damage. If the victim is drowsy or unconscious, place on left side with head down. If possible, do not leave victim unattended. Seek immediate medical attention. MEDICAL CONDITIONS AGGRAVATED: Conditions aggravated by exposure may include skin disorders and respiratory (asthma-like) disorders. NOTE TO PHYSICIAN: Toxic concentrations of cobalt in urine and blood are not well defined. In the general population, the 95th percentile for cobalt concentration was 8.3 ugl/l in urine (National Health and Nutrition Examination Survey III). Chelation treatments, for example, calcium disodium edetate or dimercaprol, are controversial. Contact a poison control center for current recommendations. Individuals with polymorphism in the HLA-DP gene (presence of glutamate 69 in the beta chain) may be more susceptible to cobalt toxicity.

5. FIRE FIGHTING MEASURES

FLASH POINT ( F) 230 OSHA FLAMMABILITY CLASSIFICATION: Combustible Liquid-Class III B EXTINGUISHING MEDIA: Dry chemical, carbon dioxide, Halon, or foam. Water spray is recommended to cool or protect exposed materials or structures. Water may be ineffective for extinguishment, unless used under favorable conditions by experienced fire fighters. Halon may decompose into toxic materials. Carbon dioxide can displace oxygen. Use caution when applying Halon or carbon dioxide in confined spaces. Avoid spraying water directly into storage containers due to danger of boilover. SPECIAL FIREFIGHTING PROCEDURES: Water may be ineffective but can be used to cool containers exposed to heat or flame. Caution should be exercised when using water or foam as frothing may occur, especially if sprayed into containers of hot, burning liquid. 6% COBALT LIN-ALL P.I. DRIER PRODUCT CODE: 115102

Page 2 of 6

5. FIRE FIGHTING MEASURES

EXPLOSION LIMITS IN AIR - LOWER (%) Unknown EXPLOSION LIMITS IN AIR - UPPER (%) Unknown AUTOIGNITION TEMP ( F) Unknown UNUSUAL FIRE AND EXPLOSION HAZARDS: Dense smoke may be generated while burning. Carbon monoxide, carbon dioxide, and other oxides may be generated as products of combustion.

6. ACCIDENTAL RELEASE MEASURES

ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Eliminate all ignition sources. Spilled material may be absorbed into an appropriate absorbent material. Prevent spilled material from entering sewers, storm drains, other authorized treatment drainage systems, and natural waterways. Stop spill/release if it can be done with minimal risk. Stay upwind and away from spill/release. Isolate danger and keep unauthorized personnel out. Use non-sparking tools and explosion-proof equipment. Recover by pumping (use an explosion-proof or hand pump) or with a suitable absorbent. Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations.

7. HANDLING AND STORAGE

HANDLING: Cobalt carboxylates may cause the ignition of rags or paper goods or other oxidizable materials. As with all unsaturated fats and oils, some porous materials such as rags, paper, insulation, or organic clay when wetted with this product may undergo spontaneous combustion. Keep such wetted materials well ventilated to prevent possible heat buildup. Avoid skin contact. Avoid heat, sparks and open flames. Maintain good housekeeping. STORAGE: Store in a cool, well ventilated area in closed containers away from heat, sparks, open flame or oxidizing materials.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

ENGINEERING CONTROLS: If current ventilation practices are not adequate to maintain airborne concentrations below the established exposure limits, additional ventilation or exhaust systems may be required. Where explosive mixtures may be present, electrical systems safe for such locations must be used. RESPIRATORY PROTECTION EQUIPMENT: When exposures are not adequately controlled, use respirator approved for protection from organic vapors. If workplace exposure limit(s) of product or any component is exceeded, a NIOSH approved air supplied respirator is advised in absence of proper environmental control. OSHA regulations also permit other NIOSH respirators (negative pressure type) under specified conditions (See your industrial hygienist). Engineering or administrative controls should be implemented to reduce exposure. PROTECTIVE GLOVES: Appropriate disposable gloves are acceptable. Resistant gloves such as Nitrile rubber can be worn. Consult your safety equipment supplier. EYE AND FACE PROTECTION: Wear safety glasses or goggles to protect against exposure. Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other types of safety glasses. Consult your safety representative. OTHER PROTECTIVE EQUIPMENT: Eye wash and quick-drench shower facilities. Impervious clothing and boots are recommended. Thoroughly clean shoes and wash contaminated clothing before reuse. VENTILATION: If vapor or mist is generated when the material is heated or handled, adequate ventilation in accordance with good engineering practice must be provided to maintain concentrations below the specified exposure or flammable limits.

9. PHYSICAL AND CHEMICAL PROPERTIES

Boiling Range/Point Vapor Pressure Vapor Density (AIR=1) Freezing Point Melting Point Physical State Color 6% COBALT LIN-ALL P.I. DRIER >510 F for petroleum hydrocarbon 0 mm Hg @ 20 C for petroleum hydrocarbon Heavier than air Unknown Unknown Viscous liquid Purple PRODUCT CODE: 115102

Page 3 of 6

9. PHYSICAL AND CHEMICAL PROPERTIES

% Volatile by Weight %Volatile by Volume Evaporation Rate ( Butyl Acetate=1) Specific Gravity @ 25C Weight per gallon 5 5 Slower than ether 0.99 8.3 lbs.

10. STABILITY AND REACTIVITY

STABILITY: Stable. HAZARDOUS POLYMERIZATION: Will not occur. HAZARDOUS THERMAL DECOMPOSITION/COMBUSTION PRODUCTS: Carbon monoxide. Carbon dioxide. Toxic fumes of cobalt oxide. INCOMPATIBILITY (MATERIALS TO AVOID): May react with strong oxidizing agents. CONDITIONS TO AVOID: Avoid excess heat and incompatibles.

11. TOXICOLOGICAL INFORMATION

TOXICITY DATA: There is no specific data for this product. The following information exists for Cobalt powder: Cobalt has not been shown to be carcinogenic to humans. The National Toxicological Program (NTP) does not recognize cobalt as an animal or human carcinogen. The International Agency for Research on Cancer (IARC) classifies cobalt as "possibly carcinogenic" to humans (Class 2B) based on animal studies. Refer to the IARC website (www.iarc.fr) for most recent information. ACGIH has given Cobalt and Cobalt Inorganic Compounds a rating of A3, animal carcinogen. They state that available epidemiologic studies do not confirm an increased risk of cancer in exposed humans. Workers with occupational asthma arising from cobalt powder are sensitized as may be demonstrated by a positive bronchoprovocation challenge test with cobalt chloride. However, this test is not widely available and should only be performed by physicians experienced in the procedure. This latter test is not widely available. Cobalt-related asthma may include early, late and dual reactions. The late reaction may appear up to 48 hours after exposure. Improvement typically occurs with cessation of exposure, such as weekends and vacations. Patch test and intradermal skin tests do not discriminate patients with cobalt-related asthma from controls in the general population. Cobalt-induced allergic contact dermatitis is characterized by erythematous papules occurring commonly on the hands. The prevelance of this condition in the workplace may be 10-15%. Most cobalt-related rashes begin in the first year of employment where cobalt is used. Risk factors include prior nickel sensitization and irritant dermatitis. 25% of nickel-sensitive individuals develop cobalt allergy compared with 5% of the general population. Sensitization to nickel and cobalt result from co-exposure rather than crossreactivity. The diagnosis of cobalt sensitivity may be made by patch testing. However, the diagnosis of cobalt sensitivity is complicated by the fact that nickel contamination of cobalt patch tests may produce false positive skin tests for cobalt in patients who are highly sensitive to nickel. ACUTE ORAL LD50: No data at this time. ACUTE DERMAL LD50: No data at this time. ACUTE INHALATION LC50: No data at this time.

12. ECOLOGICAL INFORMATION

ECOTOXICOLOGICAL INFORMATION: No data at this time. CHEMICAL FATE INFORMATION: No data at this time.

6% COBALT LIN-ALL P.I. DRIER

PRODUCT CODE: 115102

Page 4 of 6

13. DISPOSAL CONSIDERATIONS

DISPOSAL METHOD: All disposals must comply with federal, state and local regulations. The material, if spilled or discarded, may be regulated waste. Refer to state and local regulations. Department of Transportation (DOT) Regulations may apply for transporting this material when spilled. Waste material may be landfilled or incinerated at an approved facility. Material should be recycled if possible.

14. TRANSPORT INFORMATION

DOT SHIPPING NAME: DOT HAZARD CLASS: UN/NA NUMBER: DOT PACKING GROUP: AIR TRANSPORTATION: OCEAN TRANSPORTATION: Not Regulated None None None Not Regulated Not Regulated

15. REGULATORY INFORMATION

TSCA STATUS: All components of this product are on the US TSCA Inventory. CALIFORNIA PROPOSITION 65: This product is not known to contain any chemicals known to the state of California to cause cancer or birth defects. However, we do not conduct routine analysis for all listed materials. SARA 302 EXTREMELY HAZARDOUS SUBSTANCE LIST: This product does not contain greater than 1.0% of any chemical substance on the SARA Extremely Hazardous Substance List. CLEAN AIR ACT S112 HAZARDOUS AIR POLLUTANTS: Cobalt Compounds. SARA (311, 312) HAZARD CLASS: Acute health hazard. Chronic health hazard. SARA SECTION 313 TOXIC CHEMICALS: Cobalt Compounds 70% AUSTRALIAN INVENTORY CHEMICAL SUBSTANCES: All components are listed on the Australian Core Inventory of Chemical Substances (ACOIN). CANADIAN INVENTORY: All components are on the Domestic Substance List (DSL). EINECS REGULATIONS: All components are on the European Inventory of Existing Commercial Chemical Substances (EINECS). JAPAN: All components are listed on the Japanese Existing and New Chemical Substances (ENCS). KOREAN CHEMICAL INVENTORY: All components are on the Korean List of Existing Chemical Substances. PHILIPPINE INVENTORY: All components are listed on the Philippines Inventory of Chemicals and Chemical Substances (PICCS). JAPANESE POLLUTANT RELEASE TRANSFER REGISTER (PRTR): Cobalt Tallate is a Class 1 regulated substance, number 100, as Cobalt Compounds. The annual threshold quantity is 1.0 tons.

16. OTHER INFORMATION

DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES: The information in this document is believed to be correct as of the date issued. However, no warranty of merchantability, fitness for any particular purpose, or any other warranty is expressed or is to be implied regarding the accuracy or completeness of this information, the results to be obtained from the use of this information or the product, the safety of this product, or the hazards related to its use. This information and product are furnished on the condition that the person receiving them shall make his own determination as to the suitability of the product for his particular purpose and on the condition that he assume the risk of his use thereof.

6% COBALT LIN-ALL P.I. DRIER

PRODUCT CODE: 115102

Page 5 of 6

17. LABEL INFORMATION

SIGNAL WORD: CAUTION TARGET ORGANS: May cause sensitization by skin contact which may produce allergic contact dermatitis. May cause sensitization by inhalation which may produce occupational asthma. May cause eye, skin, or respiratory irritation. May be harmful if inhaled or swallowed. EYES: Flush immediately with large amounts of water and continue flushing for 15 minutes or until irritation subsides, whichever is longer. SKIN: Wash thoroughly with soap and plenty of clean water. If irritation occurs, contact a physician. INHALATION: Move the exposed person to fresh air at once. If indicated, a qualified pre-hospital medical provider (such as a first responder or EMT) may give oxygen. Contact a physician. INGESTION: Aspiration hazard. Do not induce vomiting or give anything by mouth because this material can enter the lungs and cause severe lung damage. If the victim is drowsy or unconscious, place on left side with head down. If possible, do not leave victim unattended. Seek immediate medical attention. HANDLING: Cobalt carboxylates may cause the ignition of rags or paper goods or other oxidizable materials. Keep container closed. Handle and open containers with care. Bond and ground all equipment when transferring from one vessel to another. Material will accumulate static charges which may cause an electrical spark (ignition source). Use proper grounding procedures. Do NOT pressurize, cut, heat, or weld containers. Empty product containers may contain product residue. Do NOT reuse empty containers without commercial cleaning or reconditioning. All other containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations. Use good personal hygiene practice. STORAGE: Store in a cool, well ventilated area in closed containers away from heat, sparks, open flame or oxidizing materials. ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Eliminate all ignition sources. Spilled material may be absorbed into an appropriate absorbent material. Prevent spilled material from entering sewers, storm drains, other authorized treatment drainage systems, and natural waterways. Stop spill/release if it can be done with minimal risk. Stay upwind and away from spill/release. Isolate danger and keep unauthorized personnel out. Use non-sparking tools and explosion-proof equipment. Recover by pumping (use an explosion-proof or hand pump) or with a suitable absorbent. Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations. EXTINGUISHING MEDIA: Dry chemical, carbon dioxide, Halon, or foam. Water spray is recommended to cool or protect exposed materials or structures. Water may be ineffective for extinguishment, unless used under favorable conditions by experienced fire fighters. Halon may decompose into toxic materials. Carbon dioxide can displace oxygen. Use caution when applying Halon or carbon dioxide in confined spaces. Avoid spraying water directly into storage containers due to danger of boilover.

6% COBALT LIN-ALL P.I. DRIER

PRODUCT CODE: 115102

Page 6 of 6