Honeywell Diff P Switch DPS
Honeywell Diff P Switch DPS
Honeywell Diff P Switch DPS
Applications
Differential pressure switch e.g. for monitoring filter, fan, fire damper or air flow status of air handling systems.
Benefits
Switching point easily adjustable with scale in Pascal Direction of PG 11 conduit entry rotatable in steps of 120 Only one screw needed for housing cover
Pressure medium
Air, non-inflammable and non-aggressive gases
Specifications
Max. operating pressure: Pressure connections: Switching capacity: 5000 Pa 2 plastic tubes ] 6.0 mm outside. 1.5 A (0.4)/250 V~ AMP connectors 6.3 x 0.8 DIN 46244 or screw terminals PG 11 IP 54 integrated in bottom housing 20 C + 85 C 40 C + 85 C Silicone
Operating ranges
type adjustment range for upper trip pressure from to 20 200 (Pa) 40 400 (Pa) 200 1000 (Pa) 500 2500 (Pa) switching difference (hysteresis) 10 (Pa) 20 (Pa) 100 (Pa)
Electrical connections: Conduit entry Protection class: Mounting lugs: Medium/ambient temp.: Storage temperature: Membrane material:
Approvals
150 (Pa) approval according to low voltage directive EEC 73/23. Switch according to VDE 0630. EN-1854.
The trip pressure refers to vertical mounting. In case of horizontal mounting (with cover position upwards) the range values increase by 20 Pa.
Accessories
DPSK* Duct Kit, including 2 m of siliconehose and 2 joining pipes DPSJ with screws.* Mounting brackets L-shaped Set of 3 push-on screw terminals for AMP connectors.*
Arrangement of contacts
NO
DPSL
CO
NC
DPST*
* Included in delivery of single package Switch off power before removing cover!
EN0B-073 GE51R0298
DPS SERIES
INSTALLATION INFORMATION
Dimensions
Options / Accessories
**
Joining pipe, DPSJ L-shaped mounting brackets (part of DSPK duct kit)
Content of delivery (for single package) 1 1 Pressure Switch DPS-Series * Different cover positions possible Cable fitting removable for installation Use 2 screws only for mounting lugs! Optional accessories DPSL L-shaped mounting bracket, for e.g. vertical installation below ceilings including 2 screws Bulk package available on request 1 DPS Differential Pressure Switch Data Sheet with installation information DPS kit consisting of: 2 m of silicon hose, 2 joining pipes DPSJ with 4 screws, 2 self tapping screws for mounting of housing 3 terminal screws for electrical installation
** Remove transport protection from P2! Don`t install upside down with trip pressures < 50 Pa! P1 P2 higher pressure lower pressure
Home and Building Control Products Honeywell AG Bblinger Strae 17 D-71101 Schnaich Phone (49-7031) 637-01 Fax (49-7031) 637-493 Subject to change without notice.
EN0B-073 GE51R0298
Printed in Germany.