Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 167 views

    Active Monopole Antenna: EMC Antennas

    Uploaded by

    Fakhrul Risal Djumingin
    ETS-Lindgren's Model 3301C Active Monopole antenna is designed to provide reception of an electric field throughout its frequency range, in a single band, without tuning or bandswitching. Between 250 Hz and 20 MHz, the antenna factor is flat within + / - 1 dB. The antenna is able to sense fields of +7 dB (uV / m) at 1 MHz with a 1 Kz bandwidth and 10 dB signal

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Active Monopole Antenna: EMC Antennas

    Uploaded by

    Fakhrul Risal Djumingin
    167 views2 pages
    ETS-Lindgren's Model 3301C Active Monopole antenna is designed to provide reception of an electric field throughout its frequency range, in a single band, without tuning or bandswitching. Between 250 Hz and 20 MHz, the antenna factor is flat within + / - 1 dB. The antenna is able to sense fields of +7 dB (uV / m) at 1 MHz with a 1 Kz bandwidth and 10 dB signal

    Original Title

    3301C

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ETS-Lindgren's Model 3301C Active Monopole antenna is designed to provide reception of an electric field throughout its frequency range, in a single band, without tuning or bandswitching. Between 250 Hz and 20 MHz, the antenna factor is flat within + / - 1 dB. The antenna is able to sense fields of +7 dB (uV / m) at 1 MHz with a 1 Kz bandwidth and 10 dB signal

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    167 views2 pages

    Active Monopole Antenna: EMC Antennas

    Uploaded by

    Fakhrul Risal Djumingin
    ETS-Lindgren's Model 3301C Active Monopole antenna is designed to provide reception of an electric field throughout its frequency range, in a single band, without tuning or bandswitching. Between 250 Hz and 20 MHz, the antenna factor is flat within + / - 1 dB. The antenna is able to sense fields of +7 dB (uV / m) at 1 MHz with a 1 Kz bandwidth and 10 dB signal

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Active Monopole Antenna Model 3301C

    FEATURES: n 30 Hz - 50 MHz Frequency Range n MIL-STD 461F Compliant n ESD Protected Front End n Internal Switch to Adjust Sensitivity and Frequency Roll-offs n Audible/Visual Alarm for Saturation and Low Battery Conditions n 30 Hours of Continuous Operation on a Single Charge n Two Year Warranty
    ETS-Lindgrens Model 3301C Active Monopole Antenna

    EMC Antennas

    The 3301C Active Monopole Antenna is designed to provide reception of an electric field throughout its frequency range, in a single band, without tuning or bandswitching, with an antenna factor of 3 dB rolloff points at 170 Hz and 35 MHz. Between 250 Hz and 20 MHz, the antenna factor is flat within +/- 1 dB. To prevent saturation by the low frequency signals, the lower 3 dB point is switch-selectable at 170 Hz, 1.9 kHz or 22 kHz. The Model 3301C is able to sense fields of +7 dB (uV/m) at 1 MHz with a 1 Kz bandwidth and 10 dB signalto-noise ratio. Saturation will not occur below a field strength of 0.8 V/m resulting in an extremely wide dynamic range. The saturation alarms (audible alarm and light indicator) alert you of the need to use the internal attenuators.

    The Model 3301C Active Monopole Antenna consists of an adjustable rod, a counterpoise 61 cm x 61 cm (24 in x 24 in), a broadband high input impedance amplifier built into the base, and an internal battery charger. The front panel controls and indicators include a power switch and power-on indicator, a receptacle for the DC adapter for battery recharging, a female BNC output connector, and a signal saturation indicator. Power is supplied by internal rechargeable nickel-metal hydride batteries. The Model 3301C Active Monopole antenna has builtin electrostatic discharge protection at the antenna circuit front end to protect the amplifier circuitry. The Model 3301C complies with MIL-STD-461F requirements, with grounded RF outputs, a ferrite loaded cable, and a grounding bracket included with each unit.

    STANDARD CONFIGURATION n Adjustable Monopole Element n Antenna Base with a Built-in Preamplifier and a Female BNC Connector n Antenna Base Mount with -20 UNC Internal Thread n AA NiMH Batteries and AC/DC Adapter Charger n Counterpoise n MIL-STD 461F RF Cable and Grounding Kit n Certificate of Calibration Conformance per ANSI C63.5 and SAE, ARP-958 n User Manual OPTIONS n Custom Carrying Case n Non-metallic, Non-Reflective Tripod n Model 3301CAL Calibration Block for Antenna Factor Calibrations

    www.ets-lindgren.com

    Active Monopole Antenna


    Model 3301C

    EMC Antennas

    Electrical Specifications
    MODEL 3301C FREQUENCY RANGE 30 Hz - 50 MHz IMPEDANCE (NOMINAL) 50 CONNECTORS POLARIZATION BNC (F) Linear CHARGER INPUT 5v DC/4 amp BATTERIES 8 x NiMH AA 2000 mAHr (typical) FAST CHARGE CURRENT 600 mA (typical) OPERATION TIME 30 hours (typical)

    Physical Specifications
    MODEL 3301C BASE DEPTH 19.0 cm 7.5 in BASE HEIGHT 8.8 cm 3.5 in BASE WIDTH 19.0 cm 7.5 in ROD LENGTH (EXTENDED) 104.0 cm 41.0 in. WEIGHT 1.4 kg 3.1 lb.

    Model 3301C Antenna Factor Typical Performance

    Phone + 1.512.531.6400 l info@ets-lindgren.com l www.ets-lindgren.com Offices in the US, Finland, UK, France, India, Singapore, Japan, China, Taiwan
    Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 8/09 - PDF R 2009 ETS-Lindgren REV A

    You might also like