722 6
722 6
722 6
329
722.6/NAG 1
Valve Body
Make sure during reassembly that you have the Solenoid covers installed. Failure to install the covers may cause Solenoid codes. The covers protect the solenoids from short circuiting from metal particles
330
MERCEDES
722.6/NAG 1
Solenoid Valves
8 7 6 5
10
1
ID 1 2 3 4 5
2
Description Ohms TCC Solenoid 2.5 2-3 Shift Solenoid 4 P-N Start ATF Temp Float 3-4 Shift Solenoid 4
ID Description 6 1-2/4-5 Shift Solenoid 7 Shift Pressure Regulating Solenoid 8 Modulating Pressure Solenoid 9 N2 Speed Sensor 10 N3 Speed Sensor 2006 ATRA, All Rights Reserved
Ohms 4 5 5
MERCEDES
331
722.6/NAG 1
Valve Body Screen and Latch Point
Screens
During reassembly, check balls should only be retained using Vaseline or TransGel. DO NOT use inappropriate greases (such as wheel bearing or white lithium grease).
Latch Point
Latch Point
2006 ATRA, All Rights Reserved
332
MERCEDES
722.6/NAG 1
Valve Identification
1 2 3 4 1-2/4-5 Bank 5 6 7 13 2-3 Bank 9 10 11 12 8
ID 1 2 3 4 5 6 7 8 9 10 11 12 13
Lower Valve Body Identification Shift Valve Pressure Regulating Valve Pressure Regulating Valve Shift Pressure Regulating Valve 1-2/4-5 Overlap Regulating Valve, Sleeve and Piston 1-2/4-5 Shift Pressure Shift Valve 1-2/4-5 Holding Pressure Shift valve 1-2/4-5 Command Valve B2 Shift Valve 2-3 Holding Pressure Shift Valve 2-3 Command Valve 2-3 Shift Pressure Shift Valve TCC Damper Valve TCC Lock-up Regulating Valve
MERCEDES
333
722.6/NAG 1
Valve Identification
1 2 3 3-4 Bank
4
ID 1 2 3 4 5 6 7 8
5 6
8 3-4 Bank
Upper Valve Body Operating Pressure Regulating Valve Lubricating Pressure Regulating Valve 2-3 Overlap Regulating Valve, Sleeve and Piston 3-4 Overlap Regulating Valve, Sleeve and Piston 3-4 Shift Pressure Shift Valve 3-4 Command valve 3-4 Holding Pressure Shift valve Manual Valve
334
MERCEDES
722.6/NAG 1
Check Ball Locations
Plastic Balls
Steel Balls
Steel Balls
MERCEDES
335
722.6/NAG 1
Filter and Pressure Feed Locations