Интерфейсные модули 2012

INTERFACE ELECTRONIC
4
Full Line Catalog, Volume 4
Edition: 2012
WAGO Registered Trademarks
CAGE CLAMP
CAGE CLAMP
@
POWER CAGE CLAMP
FIT CLAMP
PUSH WIRE
TOPJOB
TOPJOB
@
WINSTA
WAGO
X-COM
X-COM
@
JUMPFLEX
TO-PASS
ProServe
EPSITRON
picoMAX
WAGO trademarks are brand names or territorial registered marks

of WAGO Kontakttechnik GmbH & Co. KG
WAGO Full Line Catalogs
Volume 1, Rail-Mounted Terminal Block Systems
Volume 2, Connectors and PCB Terminal Blocks
Volume 5, WINSTA
The Connection System

Volume 3, AUTOMATION
Volume 4, INTERFACE ELECTRONIC
Rail-Mounted Terminal Blocks
Modular Connectors (X-COM
-SYSTEM and X-COM
-SYSTEM)
Patchboard Systems
Terminal Strips
PUSH WIRE
Connectors for Junction Boxes

Lighting Connectors
Shield Connecting System
PCB Terminal Blocks
Feedthrough Terminal Blocks
tMULTI CONNECTION SYSTEM
Pluggable PCB Connectors
Specialty Connectors
ll20 Moou|ot l,OSS!LM
W|to|oss !oc|oo|ogy, TO-PASS
Telecontrol Technology
loousit|o| Sw|ic|os, PERSPECTO
ll7 Moou|ot l,OSS!LM, ll7 |oc| l,OSS!LM

ll7 Soosot,^ciuoiot oxos, ll7 Cob|os ooo Coooociots
lowot Supp||os
Relays Optocouplers Special Functions
Interface Modules
Transducers
lowot Supp||os
Overvoltage Protection
Wireless Technology
Empty Housings and Mounting Carriers
WINSTA
MINI Connectors
WINSTA
MINI special Connectors

WINSTA
MIDI Connectors
WINSTA
MIDI special Connectors

WINSTA
MAXI Connectors
WINSTA
RD Cable Assemblies
WINSTA
KNX Connectors
WINSTA
IDC Flat Cables

!
"
'
%
$
Handling of WAGO Connection Technologies *
Universal connection of solid, stranded and
ne-stranded conductors
Handling:
- Open the clamp
- Insert wire
- Release the clamp done!
Universal connection with @PECIAL
Handling:
- Open the clamp
- Insert wire
- Release the clamp done!
- Solid conductors and ne-stranded conductors with
ferrules are connected by simply pushing them in
no operating tool needed.
PUSH WIRE
connection for solid wires and

stranded wires (depending on product used)
Handling:
Solid and stranded conductors that are rigid enough are
connected by simply pushing them in no operating tool
needed.
Insulation displacement connection (IDC)
Handling:
Push unstripped conductor into the IDC contact
using an operating tool.
Universal connection of conductors larger
than 6 AWG (16 mm
2
)
Handling:
- To open the clamp with a standard hex wrench or operating
tool, and turn approximately twice counter-clockwise.
- Latch holds clamp open .
- Insert conductor.
- A small counter-clockwise rotation releases the latch .
1
2
3
4
5
6
7
8
9
10
Power Supplies
Interface Modules
Transducers
Wireless Technology
Technical Section
Accessories
Volume 4
Contents
Search Aids
JUMPFLEX
Transducers / Relay and

Optocoupler Modules
857 Series
An Interface Solution for
Interface Modules
289 Series
288 Series
EPSITRON -
Power Supplies
787 Series
JUMPFLEX
8-Channel Adapter
857 Series
0
4
All Applications
Sockets for Miniature Switching Relay /
Optocoupler
788 Series
Pluggable Function Modules
286 and 289 Series
Sockets with Industrial Relay
858 Series
Relay Modules and
Optocoupler Modules
859 Series
Relay Modules in
DIN-Rail Mounted Enclosure
789 Series
0
5
Relay socket with pluggable
miniature switching relay
Relay module with pluggable
miniature switching relay
Transducer
Pluggable function modules
Pluggable signal conditioning modules
Pluggable function modules
Nowadays when equipment is designed
many scenarios need to be considered.
Some of which are user and maintenance
friendly, limited budgets, safety, availabi-
lity, space requirements and simplicity in
design and usage.

WAGO AUTOMATION offers interface
modules in various shapes and sizes to
overcome any of the restraints posed by
space requirements.

This enables any demands and needs to
be fulfilled using these different designs,
such as pluggable function and interface
modules, relay and optocoupler modules,
etc.
286 / 786 Series Pluggable Function
Modules

The terminal blocks for pluggable modu-
les offer the greatest degree of flexibility
and maintenance-friendly service.
The terminal block for pluggable modules
is mounted on the carrier rail and wired
like a normal terminal block.
If service is required, this element can be
replaced in one step, without having to
deal with the system wiring. This saves
space and additional wiring effort.
788 Series Relay Sockets with
Pluggable Miniature Switching Relay
The WAGO Series 788 relay socket
forms an excellent basis for switching
applications using pluggable miniature
switching relays (1 or 2 changeover
contacts) in industrial and process auto-
mation.
In order to cover all application areas
with one product family, it is intended to
offer five different groups for the trans-
ducers alone: these include fixed and
configurable isolating amplifiers, passive
isolators, power supply isolators (also for
HART applications), signal duplicators
and temperature transducers for Pt100
and thermocouples.
The optocoupler and relay modules
are ideal additions to a comprehensive
function module program, allowing any
required functions to be implemented in a
control cabinet by means of a pluggable
module system. Large enclosures of the
Series 786 are available for more com-
plex functions, such as transducers.
In addition to its compact design
15x53x86mm (W x H x D), the relay
socket also stands out thanks to a number
of user-oriented features, with the asso-
ciated benefits for the user.
The lever facilitates relay replacement
even when the relay sockets are placed
close to each other.
The sockets can be ordered as complete
components including relay and status
indication or as a single component.
857 Series Transducers and
Relay Modules

The new 6mm-wide WAGO isolation
amplifiers and transducers not only share
a common profile, but in addition one
in line jumper can be used to connect
the supply voltages, etc, to all modules,
doing away with the need to wire each
connection. The smaller relay modules
also fit perfectly in this scenario. The
pluggable relays can simply be replaced
from the top.
0
6
Relay modules in DIN-rail-mountable enclosure DIN-rail-mountable modules - relay modules
Relay socket
Relay module
Optocoupler module DIN-rail-mountable modules - relay modules EnOcean radio receiver in DIN-rail-mountable
enclosure
789 Series Relay Modules in
DIN-Rail-Mountable Enclosure
The range of uses for the WAGO lat-
ching relays and switching relays of
Series 789 spans from simple lighting
controls in building services, such as in
construction of apartments, hotels, office
buildings or parking garages, etc., up to
installations in industrial control cabinets.

The 17.5mm-wide design in series bay
enclosures is particularly well-suited for
installation in distribution boards and
meter mounting boards.

The series bay enclosures are used for
installation of other electronics devices
having a large scope of functions and
higher switching capacities; these come
in sizes of
2 module spaces (35mm) and
4 module spaces (70mm).

PCB terminal blocks and connectors
from the extensive WAGO program can
be installed in the enclosures to obtain
customized development of interface
components.
Installation is quick and
reliable on the 35mm carrier rail.

287 / 288 Series DIN-Rail-Mountable
Modules - Relay Modules and Sockets
The relay and PLC interface modules in
the mounting socket that can be fitted
on carrier rails ensure quick and easy
linking of signals from periphery devices.
The fully wired modules, with up to 16
high-performance relay outputs, provide
for direct switching of actuators and other
coupling elements in the field.

The requisite free-wheeling and reverse
voltage protection diodes are also inte-
grated to ensure a long service life of the
products.

Other interface modules available as:
Multiple modules with plugged relays
that are easy to replace, without affecting
existing wiring.

859 Series Relay Modules and
Optocoupler Modules
The Series 859 is a complete product
series that is ideal for the interface level
in any industrial application, thanks to the
wide range of relays and optocouplers.

These units excel in tight spaces, thanks
to their narrow 6mm design. Simple
commoning at the control and load side
enables quick and easy looping through
of common input and output potential.

Its robust design and the shock-proof
CAGE-CLAMP
connecting technology
used ensures continuous and uninterrup-
ted operation of any kind of system.
0
7
WAGO Transducers and Relay Modules
JUMPLFEX
, 857 Series
The perfect match of housing and elec-
tronics is the key to a highly successful
device. This is exactly what has been
achieved by WAGO with the transducers
and relay modules of the 857 Series.

Analog systems technology Basics
Problems can arise in signal processing
in industrial systems of analog standard
signals (such as 0-10V or 0-20mA) which
can have an adverse effect on overall
fault-free signal processing. Problems
such as potential differentials arising
from interlinked measuring circuits can
be efficiently prevented using WAGO
transducers, with their associated electri-
cal isolation.
Decoupling (Isolation) methods
A basic distinction is made between
active and passive isolation.

Active isolation
Depending on the design and model in
use, devices are available that incorpo-
rate electrical 3-way isolation. 4-way iso-
lation is provided in a signal duplicator.
This means that all inputs, outputs and
supply circuits are electrically isolated
from one another with a 2.5 kV proof
voltage.

This ensures that the greatest possible
safety and reliability is achieved for the
system and any devices connected to the
system. For 3-way isolation provides for
electrical isolation between the transduc-
ers and the control system and between
the control system and the control ele-
ments.
At the input side the devices required
active signals, i.e., the sensor signal is
generated by a dedicated supply volt-
age.
These devices provide a filtered and
amplified signal at the output side.

Passive isolation
A passive isolator draws power for signal
transmission from the input circuit. In this
case, the sensor must supply a power
level adequate for the device and must
also drive the working resistance.
As a result, it must be ensured that the
current-driving power of the sensor is suf-
ficient to drive the maximum current of
20mA via the passive isolator (with the
device-specific voltage drop), as well as
the working resistance.

This can be calculated using the follow-
ing equation:
US UE = UV + 20 mA x RB

Typical equation for a passive isolator
(857-451) for a 20mA signal.
US UE = 2.0 V + 20 mA x 600
US UE = 14 V

Temperature measuring techniques
Resistance thermometers, such as Pt100
sensors, alter their resistance level as a
function of temperature. For example,
a rise in temperature will result in an
increase in the resistance level. This
reistance level is registered by the JUMP-
FLEX
devices (for example 857-800) and

transformed into an analog output signal
and simultaneously electrically isolated
using a 2.5kV proof voltage.
The analog standard signal can be a
current signal in the 0-20 mA, 4-20 mA
0-10 mA or 2-10 mA range, or a voltage
signal in the 0-10 V, 2-10 V, 0-5 V or
1-5 V range.

Parameterization, commissioning
and diagnostics using WAGO-frame
A portion of the JUMPFLEX
transducer
can be configured for parameterization,
commissioning and diagnostics of field
devices using WAGOframe, a software
based on the FDT/DTM standard.

The WAGOframe FDT frame applica-
tion provides a wizard, which simplifies
the operation of components, such as
WAGO JUMPFLEX
DTMs. This wizard

guides the user through the different
operating modes of DTM device drivers.

3 different connecting techniques are
employed for acquisition of resis-
tance thermometers:

2-wire connecting technique

The resistance thermometer is connected
to the JUMPFLEX
transducer via a two-

wire conductor. As the feed-in resistance
can directly affect results, which would
invalidate them, it must be ensured that
the distance between the measuring point
and the device is kept as small as pos-
sible. This distance should not exceed
10m in this case. If this distance can
not be ensured, the 857-801 unit can
be used provide compensation for the
incoming resistance using the configura-
tion software.

I I I
__________________>
UV = 2.0 V
_
_
_
_
> UE
US
RB
1
2
3
4
2-wire
2.5 KV
Safe Isolation
0
8
Fe
CuNi Cu
Cu
_
_
_
_
_
>
1 2
Compensation for line resistance
(2-wire)

A resistance value can be input into this
field for compensation of the line resis-
tance for 2-wire sensors within a range of
0-50 .
Adjusting the values for resistance com-
pensation is only possible by setting the
sensor wire connection to 2-wire. Other-
wise the field is displayed in gray and
no values can be entered. Using 3- and
4-wire sensors, the input cable resistance
is compensated via the connection tech-
nology and does not enter into the mea-
suring results.


The 3-wire connecting technique mini-
mizes the effect of line resistance. The
resistance thermometer is gauged via two
measuring circuits implemented in the
JUMPFLEX
transducer. One measuring

circuit serves as the reference circuit. Line
resistance can be compensated for in this
manner.
The measuring results can, however,
nevertheless be affected by different line
lengths or by different ambient tempera-
tures. No further line adjustment is usually
necessary, as the same line lengths and
the same ambient temperatures exist in
most cases.


The most accurate measuring method
employs the 4-wire connecting technique.
This involves feeding in a low supply
current via two fully isolated measur-
ing circuits via two lines and measuring
the voltage drop across the resistance
thermometer via the other two lines. This
method offers the advantage not being
influenced by line resistance or tempera-
ture-induced fluctuations, as the voltage
drop for the incoming and outgoing
lines can be measured separately and
compensation provided for as required.
Again, no line adjustment is required
here.

Thermocouples
In contrast to resistance thermometers,
thermocouples are active sources that
generate output in the microvolts range.
Thermocouples have very low resistance
and are therefore noise-free. Preferred
applications include tasks in environments
with high temperatures, such as in ovens
or machines in the plastics industry.
The joining of two different materials
at the thermocouple results in different
energy of formation of the metal atom
electrons, yielding a thermoelectric volt-
age. The level of this thermoelectric volt-
age is a function of the material and of
temperature.

If the temperature at measuring point 1 is
the same as the temperature at reference
point 2, no current will flow, as the two
component voltages cancel one another out.
However, if the temperatures at the measur-
ing point and at the reference point are dif-
ferent, differing voltage levels are produced
which do not completely cancel one another
out, resulting in a flow of current.
To summarize then, a thermocouple only
measures a difference in temperature. This is
yielded from the difference between the ther-
moelectric voltage levels at the measuring
point and at the reference point. The voltage
fluctuation produced by the thermoelectric
effect is very low and is generally only a few
microvolts per Kelvin. Therefore, only the dif-
ference between the thermoelectric voltages
of the materials used is of significance, for
example, thermocouple type J, iron (Fe) and
constantan (CuNi).

Also of some significance in the connec-
tion point temperature. This temperature
must be known in order to derive the
ambient temperature from the thermoelec-
tric voltage level. This is why the tempera-
ture at the connection point is measured
by JUMPFLEX
transducers. This value,

also referred to as the reference or cold
junction, can then be compensated for.
(cold junction compensation)
Cold-junction compensation can be acti-
vated and de-activated just by a click
using the configuration software (default
setting: ON (activated)).

Table for Thermocouples

Relay modules with mounted minia-
ture switching relays
The JUMPFLEX
product family is
rounded out by the relay modules that fit
perfectly with the transducers.
A logical enclosure concept with options
for linking all levels offers a variety of
synergy and cost-savings potential. This
allows for efficient optimization of instal-
lation efforts.
The pluggable relays can be replaced
quickly and easily when required.

For further information about the relays
go to pages 10 - 12.
Type of
sensor
Thermocouple
materials
Measuring range
J *) Fe-CuNi -210 C ... +1200 C
K *) NiCr-Ni -200 C ... +1372 C
E *) NiCr-CuNi -200 C ... +1000 C
N *) NiCrSi-NiSi -200 C ... +1300 C
R *) Pt13Rh-Pt +250 C ... +1768 C
S *) Pt10Rh-Pt -50 C ... +1664 C
T *) Cu-CuNi -200 C ... +400 C
B *) Pt30Rh-Pt6Rh +250 C ... +1820 C
C 0 C ... +2320 C
*) Thermocouples based on IEC 584 / EN 60584
Other thermocouples available upon request.
1
2
3
4
3-wire
1
2
3
4
4-wire
0
9
WAGO Relay Modules.
The professional interface
between electronics and peripheral
equipment.
Even in modern automation systems,
electromechanical relays guarantee
a safe connection between process
control systems and process and
signalling systems. They provide:
a high isolation level between input
and output circuit
ability to match different signal levels
signal amplification and/or signal
multiplication, especially for different
potentials in the input and output
circuits.
Modernized relays also offer
the following advantages:
unaffected by electromagnetic fields
and surges
high short-term overload capacity for
the input and output sides
small switching power losses
a module for switching of AC or DC
WAGO AUTOMATION offers a
complete range of relay modules that
provide these functions for a wide range
of applications.
Depending on the function and
operating conditions, the relay modules
are available with different contacts, con-
tact materials, housings and shapes.
The following relay types are also
available: bistable switching relays, time-
delay relays, current pulse switching and
safety relays with force-guided contacts.
AC versions of select relays equipped
with series connected rectifiers
(refer to the wiring diagrams) can be
triggered with AC and DC at the stated
nominal voltage.
The free-wheel function is in this case
actuated by the rectifier.
In order to guarantee a safe operation it
has to be observed that residual volta-
ges due to cable capacitance in case of
long connecting lines or leakage currents
of semi-conductor switches and their pro-
tection circuits are lower than the release
voltage of the relay.
For DC relays, the release voltage is spe-
cified with a value of 5% of the nominal
voltage;
for AC relays it is 15% of the nominal
voltage (acc. to VDE 0435).
If a high residual voltage exists, it is
possible that the relay will not reset.

Addition of a parallel connection of an
RC element of:
R = 100-220
C = 220-470nF
could remedy this situation.
Definitions of several
important technical terms

Coil-side information
The relays can be used within the stated
temperature range with nominal voltage
plus tolerance at 100% contin uous duty
rating.
According to the type and application,
the relays are triggered with DC or AC
signal.
The DC versions (residual ripple 6%)
are, unless otherwise stated, equipped
with LED function indicators, a recovery
diode and a reverse voltage protection
diode.
Alternatively, the 286-904 relay
module is available.
This specially developed module
features a defined release point at
110VAC 10% at an operating
voltage (coil volt age) of 230 VAC.
For a nominal voltage of 12VDC,
the LED is connected in parallel to the coil.
For a nominal voltage 24VDC,
the LED isconnected in series with the coil.
WAGO Relay Modules
0
10
+
<
_
_
_
_
_
_
_
_
_
_
<
_
_
_
_
_
_
_
_
_
_
+
<
_
_
_
_
_
_
_
_
_
_
VDR
+
_
_
_
_
_
_
_
_
_
_
>
R
C
+
<
_
_
_
_
_
_
_
_
_
_
+
Contact material Properties and use Range of values

Ag Ni 0.15 + 5 Au High corrosion resistance, low and V . . . 30 V
constant contact resistance at small power A . . . 0.2 A
ratings, for dry circuits
Ag Ni plated Same properties as a 5 gold contact, 100 mV/10 A
with Au Ag + Au however with five times greater resistance
to wear, for all circuits from the W range
up to 100 W/1 kVA
Ag Cd 0 + 1 Au Low tendency to contact weld, high resistance 5 V
to contact burn-out at higher power rating, 10 mA
also suitable for lower power ratings
Ag Cd 0, Low tendency to contact weld, high resistance 12 V
with gold flash to contact burn-out at higher power rating, with 100 mA
gold flash for additional protection during storage
Ag Ni 0.15 + HV High mechanical strength, low tendency to 12 V
contact weld and low contact resistance, universal 5 mA 10 A
application at medium loads
Ag Sn 0
2
Small tendency to contact weld, high resistance to 5 V/100 mA
contact burn-out at higher power rating, small 10 V/10 mA
migration of material, for circuits with high input 24 V/1 mA
and output ratings, DC circuits
Ag alloy, High mechanical strength, small tendency to 10
3
W
with gold flash contact weld, wide scope of application for low to
medium ratings
Contact material
To ensure a long service life and low
contact resistance, various materials may
be used for relay contacts (depending on
the load type, switching current, voltage
and duty cycle).
Possible mate rials, their properties and
advantages are shown in the table.
Contact switching protection
When switching inductive loads
(e.g., for contractors or solenoid valves)
transients with peak voltages up to
thousands of volts will arise.
Suppression is necessary as these
transients frequently exceed admissible
EMC limits.
Moreover, they cause electric arcs at the
switching contact that destroy the
contact and significantly reduce the
relays service life and functional safety.
In practical use the following switching
protections, which are connected directly
at the source in parallel to the load, have
proved to be efficient:
Additional Defined Attenuation Advantages /
Switching of load off-delay limitation of when used disadvantages
inductive with bipolar
voltage circuits
Load U
D
Load U
ZD
Load U
ZD
Load U
VDR
Load U
RC
Circulating diode Advantages:
simple device
cost-effective, reliable
sizing not critical
large yes (V
D
) no small inductive voltages
Disadvantages:
limit only via load
resistance
longer turn-off time
Series of diode /Zener diode Advantages:
sizing not critical
Disadvantages:
limits only above V
ZD

medium yes (V
ZD
) no
to small

Suppressor diode Advantages:
cost-effective
sizing not critical
limitation of positive peaks
suitable for alternating
medium yes (V
ZD
) yes voltages

to small
Disadvantages:
attenuation only
above V
ZD
Varistor Advantages:
high energy absorption
sizing not critical
suitable for AC voltages

medium yes (V
VDR
) yes
Disadvantages:

to small
attenuation only
above V
VDR

R/C combination Advantages:
limiting by energy storage
suitable for
alternating voltages
medium no yes limiting independent
to small of level
Disadvantages:
exact component values
high turn-on current pulse
0
11
B
19
11
14
6
20
12
13
5
A
19
11
14
6
20
12
13
5
a
b
c
d
1000
500
200
100
50
20
10
1 2 3 4 5 6 7 8 9 10
A1
+
A2
+
A3

_
14
12
11
More details upon request.
L
i
v
e

x

1
0
4

s
w
i
t
c
h
i
n
g

o
p
e
r
a
t
i
o
n
s
Switching current A
250VAV, resistive load
250VAC, inductive load
(cos. = 0.4)
Service life
The difference between mechanical life
and electrical life must be distinguished.
Mechanical life consists the amount of
switching operations without contact
load; electrical life at maximum load
refers to the amount of switching
operations with maximum switching capa-
city and resistive load.
Smaller switching capacities increase the
operation at maximum load. The
following illustration shows the typical
course between switching current and
relay's operational life.
Description of select relays
Bistable switching relays
Bistable switching relays have 3 coil con-
tacts. According to the wiring
scheme, the relay is switched into
working condition
(contacts 1114 closed) by the common
connection A 3 and the connection A 1
and into rest position
(contacts 1114 opened) by the con-
nection A 2.
After removing the control signal, the
relay returns to its respective position and
can only be switched over by a control
signal circuit. The bistable
switching relays are only available for
direct voltage with positive or negative
triggering.
Current pulse switching relay
One current pulse is needed to change
the relay from the rest position to the wor-
king position and vice versa.
During the triggering process, one of two
status indicators displays the actual con-
tact position. The current pulse
switching relay is available for direct and
alternating voltage.
Safety relay
Force-guided safety relays, have become
increasingly recommended and specified
for self-regulated systems as they provide
protection for personnel, machines and
installations. Relays with force-guided
contacts are an essentially safety com-
ponent for these circuits, particularly
when defects occur. WAGO offers these
functions in special relay modules with
force-guided contacts as based on to
ZH1/457
(Specification of the employers liability
insurance association).
Example of circuit configuration:
Control of different peripheral equipment (a, b, c, d)
with monitoring
Input interface
CPU
or
control logic
Output interface
Monitoring circuit
WAGO Relay Modules
As shown in the fig. Example of Circuit
Configuration, two SF relays are con-
trolled by one output interface. The NO
contacts 1314/1920 of relay A and
B switch over the peripheral equipment.
After switching off equipment a ... d the
control circuit
(NC contacts 56/1112) verifies that
all main circuits are interrupted.
When the control circuit is closed, the
next operation cycle will be executed by
the CPU or by the control logic.
Depending on the safety requirements,
an open control circuit prevents
operation of either the entire machine or
specified components.
If a partial or complete standstill is
required in the event of a failure
(for ex. in medical technology or chemi-
cal processes) each control contact can
be polled and evaluated.
Independent of a single or complete
control for the NO contact, the SF relay
operates in such a way that the other
equipment is switched off even if a NO
contact is welded. The failure is recogni-
zed by the control contact while the other
contacts are still able to open to interrupt
circuits.
Time delay relays
WAGO time delay relay modules are
electromechanical time relays with an
integrated time response, e.g., acc. to
VDE 0435, part 201/5.83.
The time ranges can be adjusted via
potentiometer for either continuously
variable or linear operation. A status LED
indicates the switching condition of the
relay.
0
12
RL
1
+
2

A1
+
A2

RL
1
+
3

2

A1
+
A2

A2

RL
1
+
3

2

A1
+
A2

A2

RL
1
+
3

2

A1
+
A2

A2

RL
1
+
3

2

A1
+
A2

A2

RL
1
+
3

2

A1
~
A2
~
A2
~
~
RL
1
2

2

A1
+
A2

A2

~

~

~

N
u
lls
p
a
n
n
u
n
g
s
s
c
h
a
lt
e
r

WAGO Optocouplers
WAGO optocouplers: the modern
and efficient alternative
As the connecting element between
process interface and electronic control
and signalling systems, the optocoupler
modules offer the following advantages
compared with mechanical relays:
long service life, because there is no
mechanical wear
high switching frequency because of
fast switching times
unaffected by vibrationn
no contacts
noiseless switching
low driving capacity.
For all interfaces between control and
load circuits that rely on these advan-
tages, WAGO AUTOMATION offers a
complete optocoupler range for the follo-
wing functions:
electrical isolation between input and
output circuit
adaptation to different signal levels
signal amplification.
The optocoupler modules are available
in WAGOs component plug technology
that is designed to plug directly into rail-
mounted carrier terminal blocks.
The terminal blocks are fitted to the carri-
er rail and offer all advantages of CAGE
CLAMP
technology, which provides safe

and maintenance-free connection of the
signal wires for cross sections ranging
from 0.08 mm
2
to 2.5 mm
2
/
AWG 2812.
In addition to optimizing space through
the combination of terminal points and
the function module, maximum flexibili-
ty and ease of service are also achieved.
Due to the low threshold voltages, care
must be taken to ensure malfunctions are
not caused by the capacitance of long
signal lines or the residual off-current of
semiconductor devices.
Output circuit
Depending on the application, an
optocoupler module for the AC or DC
supply may be chosen. In the case of DC
outputs, they can be:
2-wire output
3-wire output positive switching
3-wire output negative switching.
In order to avoid high turn-on currents,
the AC output is equipped with a zero-
voltage switch which turns on the load at
the zero-voltage point. In the current zero-
crossing, the Triac will cut off the load,
in case inductive loads do not exceed
the maximum switching voltage and the
maximum switching current.
In addition to these different functional
outputs, the output voltage range an
the maximum switching current must be
observed. Also note the correct polarity.
In order to protect the output transis tors,
inductive loads must always be equipped
with a protective circuit, e.g., a recove-
ry diode. For other types of protective
measures, the cut-off voltage peaks must
be lower than the indicated cut-off volta-
ge of the output transistors. For the AC
outputs a Triac is used as the switching
element.
Input circuit
According to the type, triggering the
optocoupler modules is performed via
direct voltage (residual ripple RR <6%) or
AC voltage (5060 Hz).
In the DC type, a reverse voltage
protection diode is always provided;
in the AC type optocoupler element,
a rectifier is included.
The optocoupler modules are equipped
with a LED function indication at either
the input side or at the load side, as
shown in the wiring diagram.
2-wire output
3-wire output positive switching
3-wire output negative switching DC triggering with LED function indication in the
triggering circuit
DC triggering with LED function indication in the
load circuit
AC triggering with LED function indication in the
load circuit
0
13
1
2
0V
+ 24V
OUT
ERR.
0V
WAGO Analog Signal Conditioning Modules
Transducers for measurement tech-
nology
The Recording and processing of num-
bers of physical values, such as tempera-
ture, pressure, speed, humidity, etc., form
the basis for modern process control.
Special sensors supply these values as
analog signals, which must be transmit-
ted as standard analog signals to the
processing instruments. These analog
signals may be transmitted over long
or short distances between sensors and
controlling mechanisms, for example PLCs
and computers, or in less sophisticated
systems directly to relays or actuators.
Various standards are used. Normally
recognized signals are
0-10 V, 0-20 mA and 4-20 mA.
The transducer/transmitter may also linea
rize non-linear signals internally, before
transmission. In order to prevent these
relatively low power signals from dis
tortion, WAGO AUTOMATION offers a
complete range of modules for measure-
ment and transmission of these signals,
both with and without isolation between
the modules input/output and the sup-
ply voltage (if necessary). Apart from
the converters for various standardized
signals, WAGO offers a complete selec-
tion of analog/digital and digital/analog
converters with a resolution of 10 bits.
The electronics are protectect by an
enclosure which can be snapped on a
DIN 35 rail. The CAGE CLAMP
connec-
tion ensures a secure, maintenance-free
connection for conductors sized from
0.08 mm
2
to 2.5 mm
2
/AWG 28-12.
Temperature transducers
Temperature sensing in the process
industry is traditionally performed via
Thermocouple or RTD (Platinum Resi-
stance) elements. A popular RTD is the
Pt100 element. Having a nominal resi-
stance of 100 ohm at 0C, and a typical
operating temperature range of 200C
to + 650C, its non-linear characteri-
stics are compensated by the WAGO
signal conditioning module, as the Pt100
element typically meets the IEC 60571
specification.
The WAGO Pt100 signal conditioning
module is suitable for 2- or 3-wire RTD,
with 3-wire RTDs offering greater accura-
cy over longer distances. Thermocouples
consist of two different metals that are
connected at the measuring point and
utilize of the Dissimilar Metal (EMF)
effect, which can be measured at the
open ends of an element.
WAGO analog signal conditioning
modules are designed to work with com-
mon types of J (Iron/Constantan) and
K (Chromel/Alumel) thermocouples,
which comply with IEC standard 60584
Pt. 1, with cold junction compen sation.
WAGO temperature transducers are
available with industry standard output
signals of 0-10 V, 0-20 mA or 4-20 mA.
Additionally, they have an integral wire
break/short circuit detection. Visual
LED fault indication is standard, but the
WAGO modules also include an error
output signal that may be used to initiate
a safe shutdown before serious damage
occurs in the event of a wire break or
short circuit of the measuring sensor.
For this purpose, a transistor switches the
output as soon as the operating voltage
is correct and no error is present in the
measuring circuit on VB-2V. The transistor
blocks the output in the case of an error.
WAGO temperature transducers are
available as follows:
The wire break and short circuit
error output is available on the
Pt100 module.
The wire break function is available-
on the J and K Thermocouple modules.
In the event of wire break, the outputs
switch to the following values:
Output Value
0(4)-20mA 20.5mA
0-10V 14V
With Pt100 modules, and in case of
short circuit, the outputs switch
to 0V or 0mA, respectively.
The mechanical assemble of pluggable
modules for rail-mounted terminal blocks
on DIN 35 rails offers all the advantages
of CAGE CLAMP
connectivity.
Additionally, the separation of wiring and
function levels offer maximum flexibility
and ease of service.
When using insulated thermocouples, terminal 2
has to be connected to 0 V.
In the case of grounded (earthed) thermo couples,
the design is such that terminal 2 is alread connec-
ted to 0 V inside the thermo couple element.
Therefore, it is not necessary to jumper 2 0 V.
For commoning 2 0 V, 4-wire base terminals are
recommended.
0
14
WAGO Interface Modules
WAGO Interface Modules

Interface modules connect electronic to
electromechanical functions at the control
level.
They connect:
signal transmission,
control system field
signal distribution,
control system field.
They allow prefabricated plugs to inter-
face to discrete field wiring.
WAGO AUTOMATION offers a wide
range of interface modules for commonly
used connector types. The use of these
interface modules offers the following
advantages in the system wiring:
easy and time-saving planning and
calculations
rapid wiring, starting and fault
elimination by clearly arranged wiring
and clear pole marking, reduction of
wiring faults
safe and maintenance-free connection
of the signal lines with the
CAGE CLAMP
terminal strips
high packing density creates
space-saving modules
The interface modules are standard in
a universal mounting carrier for DIN 35
carrier rails with the following
connectors:
Subminiature-D connectors
acc. to DIN 41 652 or MIL-C-24308
Interface modules for male and female
connectors are available with 9, 15, 25,
37 or 50 contacts. Compared with the
standard solder connection, the mating
connector with IDC connection offers
additional advantages.
Connectors
acc. to IEC 60603/DIN 41 612,
types C, E and F
These connectors are frequently used for
compact input and output component
groups and are available for
32-, 48- and 64-pole pin and socket con-
nectors, as well as for mating
connectors with solder and IDC contacts.
Ribbon cable connectors
acc. to IEC 60603-1 / DIN 41 651
or MIL-C-83503
Interface modules with 10-, 14-, 16-,
20-, 26-, 34-, 40-, 50- and 64-pole con-
nectors are available for ribbon cable
connectors.
0
15
WAGO EPSITRON 787 Series
High-Performance and Efficient Advanced Power Supplies
PRO Power Supplies
Slimline, 1- and 3-phase, primary switch
mode power supplies feature a wide
input voltage range, stabilized, adjustable
24VDC output voltage and up to 93%
high efficiency. An integrated Power-
Boost (up to 200 % output power for 4
seconds) allows reliable starting of heavy
loads with high inrush currents, eliminating
expensive oversizing of the switch mode
power supply. The TopBoost function,
which provides a much higher output cur-
rent of up to 60A for 50ms, permits use
of standard circuit breakers for protection
on the secondary side. This enables safe
tripping within the time limits required by
the EN 60204 standard.
Select devices utilize the LineMonitor fea-
ture for current and voltage monitoring,
fault memory and parameterization opti-
ons via LCD display, on-unit function keys,
or free monitoring software and available
RS-232 interface from a PC and PLC. This
allows the power supply to replace addi-
tional devices, such as phase failure and
phase sequence monitoring devices or
operational hour meters.
Additionally, the single-phase power sup-
plies have a stand-by mode to switch off
the device output via remote input, while
minimizing power consumption. CAGE
CLAMP
pluggable terminations permit

efficient pre-wiring.
CLASSIC Power Supplies
Single-phase, primary switch mode, indu-
strial power supplies provide a with wide
input voltage range and robust metal
housings. The CLASSIC Power Supplies
have a stabilized, adjustable output volta-
ge and provide short-circuit and overload
protection. The devices achieve high
efficiency and the integrated LED status
indicator conveniently provides operatio-
nal status at a glance. CAGE CLAMP

pluggable terminations permit efficient
pre-wiring.
The CLASSIC Power Supplies are avai-
lable in four nominal output voltages:
12VDC, 24VDC or 48VDC, as well as
30.5VDC for AS-Interface networks.
ECO Power Supplies
Single-phase, primary switch mode
power supplies in sturdy metal housing
offer a wide input voltage range from 90
to 264VAC, without manual switching.
The stabilized, front-panel adjustable
24VDC output voltage is protected
against open and short circuits, and
constant current operation is provided in
the overload range. LEDs quickly provide
operational status at a glance. CAGE
CLAMP
provides fast, vibration-proof

and maintenance-free terminations.
Rail-Mounted Modules
Constant Voltage Sources
Constant voltage sources provide stabili-
zed 24VDC voltage via integrated longi-
tudinal voltage regulator.
CAGE CLAMP
provides fast, vibration-

proof and maintenance-free terminations.
The modules are DIN-rail mountable.
Rail-Mounted Modules
Power Supplies
Conventional transformer power supply
with bridge rectifier, smoothing capa-
citors and stabilized output voltage via
longitudinal voltage regulator. This power
supply is ideal for supplying small loads
with nominal output voltages of 24VDC,
12VDC, 12 VDC and 15 VDC. The
low residual ripple makes the units well
suited to applications using analog tech-
nology.
CAGE CLAMP
provides fast, vibration-

proof and maintenance-free terminations.
The modules are DIN-rail mountable.
0
16
Communication Cable
The communication cable connects the
RS-232 interface for power supplies with
integrated LineMonitor (787-85x) and
electronic circuit breakers (787-86x), as
well as UPS charger and controller units
(787-87x) to the RS-232 interface of a
PC or PLC. When combined with free
software, the cable provides easy para-
meterization and diagnostics for these
WAGO power supply solutions.
Electronic Circuit Breakers
Configurable protection via 4-channel
electronic circuit breakers, for shutting
down faulty 24VDC current paths. Offe-
ring adjustable trip times, the Electronic
Circuit Breakers can respond to short
circuits/overloads quicker than tradi-
tional circuit breakers or melting fuses,
or when unintended start-ups must be
prevent in the event of a ground fault
(see EN 60204). This is particularly
advantageous when using long cables
between a power supply and load where
loop resistance may be very high. Inte-
grated current and voltage monitoring,
as well as parameter setting via display
and on-unit function keys, or via free
software from a PC or PLC, provides easy
operation and diagnosis. Electronic circuit
breakers with active current limitation
(maximum 1.5 times rated current) are
also available as an option. These advan-
ced features enable the Electronic Circuit
Breakers to reliably prevent voltage drops
in the event of a short circuit.
Uninterruptible Power Supplies
(UPS)
The Uninterruptible Power Supply (UPS)
provides reliable power applications
impacted by long-term power outages.
The UPS consists of a charger, controller
and a connected battery (capacities
ranging from 3.2 to 12 Ah are availab-
le). In battery operation, 24VDC can be
provided for several hours depending on
the load current and battery capacity.
The charger and controller are supplied
with 24VDC from an external power
supply capacity must be matched to
the load. Operation, configuration and
diagnosis are simplified by an integrated
LCD with keypad, or free software using
an RS-232 interface (for connection to a
PC or PLC). The battery modules have a
temperature sensor NTC 164 (4k7 ),
allowing for temperature-controlled char-
ging via charger and controller, which
may extend the battery's service life.
Capacitive Buffer Modules
Capacitive buffer modules ensure smooth
operation and protect data during shorter
24VDC power interruptions. Depending
on the output current and buffer capacity,
buffer times up to several seconds can be
achieved. Control units are particularly
sensitive to short power interruptions.
This is why an integrated signal contact
reports buffer operation,offering the
control unit sufficient time for preventive
measures (e.g., saving valuable produc-
tion data or program parameters).
Redundancy Module
The redundancy module has two inte-
grated power diodes (2 x 20A) for par-
allel connection of power supplies, while
improving power supply availability or
increasing the total current (max. 40A)
for the 24VDC loads.
A signal contact reports the failure of one
or both input voltages, which is also dis-
played via LED.
DC/DC Converters
DC/DC converters available in 6.2mm-
wide terminal block housing or DIN-rail
mount carrier. These converters are ideal
for applications where it is not necessary
to use a separate power supply with
special voltage due to low power require-
ments (e.g., when supplying sensors,
actuators or DALI bus devices).
0
17
<__________ T2 = 50ms __________>
(_T _)
T1 = 1,2 ms
%
100
90
50
30
0
(_ _)
_
_
_
_
_
_
_
_
_
_
>
<_____ T2 = 20ms _____>
T1 = 8 ms
%
100
90
50
10
u
WAGO Overvoltage Protection

Voltage pulses 1.2 /50
per IEC 60060-1/DIN VDE 0432 P. 2
Current pulses 8 /20
per IEC 60060-1/DIN VDE 0432 P. 2
Application recommendations

The advantages of gas-filled surge arresters
lie in their high current carrying capacity,
making them ideal for coarse protection. One
disadvantage, particularly in the medium pro-
tection range, is the relatively long response
time, as well as the power follow current.
Varistors have a considerably shorter
response time; however they also have lower
leakage currents. This makes them more
suitable for medium protection, as they offer
limited applications for coarse protection.
If the connection lines of electronic equipment
are already fine protected, general coarse
and medium protection measures are suffici-
ent. If this is not the case, suppressor diodes
with very short response time may be employ-
ed as fine protection.
WAGO AUTOMATION offers a complete
range of modular terminal blocks with inte-
grated surge arresters for coarse, medium
and fine protection.
Depending on the application, one can
choose the appropriate type from the pre-
viously mentioned surge arresters. These are
electrically connected in the modular terminal
blocks between the connection point and
the mounting rail. Snapping the terminal
block onto the grounded (earthed) moun-
ting rail automatically ensures the required
overvoltage protection.

Varistors have a very high resistance until their
threshold voltage is exceeded. Then they drop
to a low resistance and are capable of car-
rying high currents for a short period of time.
They have a fast response time, and have a
current carrying capacity dependent on the
surface area of metal oxide material.
MOVs can be sized to handle currents excee-
ding of 100 kA.
Undersized varistors can age with con tinued
surge conduction, resulting in lower impe-
dance and higher leakage.
When subjected to continuous (AC or DC)
voltages in excess to the device rating, MOVs
can overheat, and even explode, in certain
circumstances. This is why a quality surge pro-
tection device is important, it will incorporate
protective measures to disconnect faulty com-
ponents before safety is compromised.

Suppression diode
(or silicon avalanche diode)
These devices have electrical characteristics
similar to Zener diodes, but are rated for sur-
ge currents.
Once the rated breakdown voltage is excee-
ded (in the non-conductive direction), the
diode becomes a conductor. The suppressor
diode differs from a Zener in its higher current
carrying capability and faster response time
(in the picosecond range).
Test impulse

Surge arresters are subject to standardized
test pulses in order to classify capabilities;
the effectiveness of protection measures with
reference to dissipation capacity and voltage
arresting. The form and level of the test pul-
ses are defined by IEC 60060-1/DIN VDE
0432, part 2. Preference is given to voltage
pulses of 1.2/50 and current pulses of 8/20.
WAGO overvoltage protection
for increased safety and longer
on-line operation

On-the-line overvoltages cause most ope-
rating failures for measuring, control, data
and power lines. Failure of electronic and
semiconductor components due to surges can
cause operating interruptions. The overvolt-
age (also called transients) can be generated
by switching electrical equipment on or off
or by lighting discharges. Devices designed
to protect electrical equipment from these
voltages are called SPDs (Surge Protection
Devices). SPDs may consist of either a single
component or a combination of them. Various
components may be subdivided in use by the
protection type offered:
Cootso ptoioci|oo
Moo|u ptoioci|oo
l|oo ptoioci|oo.
The boundaries between these levels of pro-
tection may not be sharply defined, leading
the devices chosen to vary accordingly. The
following components have proven perfor-
mance in these applications:
Gas-filled surge
arresters and spark gaps

The gas filled surge arrester is comprised of
two electrodes in a ceramic or glass tube
filled with a pressurized inert gas. A spark
gap is simply two electrodes in air, spaced a
predetermined distance apart.
Once the ignition voltage is reached,
resistance drops due to ionization and current
begins to flow. The resist ance of the device
drops from high to low as it conducts. The
voltage across the device after the arc is
struck is typically 10 V ... 30 V. Therefore, the
current will continue to flow until the voltage
drops below this level. As this is not a gua-
ranteed occurrence in typical power situati-
ons, a fuse must precede the device to ensure
disconnection from the supply.
The advantage of a gas-filled arrester:
high current carrying capacity for its size.
However, the key disadvantages:
slow response speed and in AC applications,
the crowbar action across the supply.
Varistor
A varistor is a voltage-dependent resis tor.
A common type of varistor is referred to as
an MOV (Metal Oxide Varistor) due to its
method of construction.
V
V
0
18
0 20 40 60 s
kV
12
10
8
6
4
2
0
1 kV/ms
0 1 2 s
V
600
500
400
300
200
100
0
0 1 2 s
V
600
500
400
300
200
100
0
0 1 2 s
V
600
500
400
300
200
100
0
L
a
L
a
duration of
surge voltage
a)
or R gas-filled surge
arrester
varistor suppression
diode
applicance to
be protected
Function diagram of a multi-stage surge voltage protection module
Frequently, only one surge arrester is fitted for
cost reasons. However, due to the fact that
one surge arrester alone cannot optimally
ensure several protection functions, combinati-
ons are recommended. Care must be taken to
ensure that the single-stage protection devices
are decoupled sufficiently by inductors or
resistors.
In addition to single-stage surge arresters,
WAGO AUTOMATION also offers multi-
stage surge arresters, combining components
for different applications. These pluggable
modules are snapped into carrier terminal
blocks. These are DIN rail-mounted and offer
secure and maintenance-free
CAGE CLAMP
terminations for conductors

0.08mm
2
/AWG 28 to 2.5mm
2
/AWG 14.

Addition of interference suppres sion to surge
suppression devices.
In addition to overvoltage protection, a high
frequency interference fil ter can be added to
the circuitry. This filter cannot only protect the
equipment from high frequency energy trans-
mitted by connecting wires, but also prevents
a transmission of disturbances to the supply
lines. The main component of a filter is an
LC network, which produces a mismatch
between the filter impedance and the
impedance of the disturbance path. This
reflects any disturbance back to its source.
Double-deck terminal block with varistor,
direct connection to the DIN 35 rail
V
DC
= 24 V
Definition of several important
technical terms

Nominal operating voltage (V
BN
)

The nominal operating voltage corres ponds to
the voltage which may be permanently
connected to the appropriate connection
terminals of the overvoltage protection modu-
le. Alternating voltages are quoted as effecti-
ve values.
Max. operating voltage (V
Bmax
)

The maximum operating voltage cor responds
to the voltage which may be permanently
connected to the appropriate connection
terminals without the operating properties
changing or activating the individual module's
protection elements.
Nominal current (I
N
)

The nominal current corresponds to the cur-
rent which may permanently flow through the
connection terminals of the overvoltage
protection device.
Nominal discharge current (I
SN
)

The nominal discharge current is the
maximum value of a current having the
8/20 s waveform
(DIN VDE 0432/10.78 part 3), which can
flow through the surge arrester five times
within a time period of 30 seconds (VDE) wit-
hout destroying it.
Max. surge current (l
Smax
)

The maximum surge current l
Smax
defines
the maximum value of a current having
the 8/20s waveform, which can flow
through the surge arrester once without
destroying it.
Protection level

The protection level is the value of the
residual voltage occurring on the pro-
tected side of the surge arrester when
applying the rated discharge current.
Response time (t
an
)

The response time is primarily based
on the physical properties of the surge
arresters and is dependent upon the
wave front duration of the surge voltage.
WAGO's data refers to a voltage rise of
1kV/s.
Pluggable surge suppression modules with on-unit
warnings
0
19
Nominal voltage 5 V 12 V 24 V 48 V 60 V 115 V 230 V
1 changeover contact Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page
DC
859-302 32 859-303 32 859-304 32 286-304 113 859-305 32 859-306 32 859-307 32 859-308 32
286-302 113 857-303 50 859-314 33 286-394 114 857-305 50 857-306 50 859-317 33 859-318 35
788-303 72 859-390 36 286-380 121 788-305 72 788-306 72 859-391 37 857-308 50
286-303 113 859-398 37 286-381 121 788-342 82 286-306 113 857-307 50 857-318 50
287-853 105 859-392 38 288-304 101 286-305 113 857-317 50 286-308 113
857-304 50 287-774 103 286-395 114 788-307 72
857-314 50 287-804 104 788-344 82
788-304 72 287-824 104 286-307 113
788-404 74 287-854 105
788-324 76 288-380 107
788-354 78 789-304 152
788-341 82 789-1341 156
AC
788-506 73 859-360 34 859-359 34
788-541 83 859-367 35 859-368 36
788-507 73 788-508 73
788-607 75 788-608 75
788-543 83 788-528 77
286-507 113 788-544 83
286-508 113
286-904 120
288-508 101
288-762 102
789-508 152
789-1544 157
AC/DC
286-502 113 859-353 32 859-354 32 286-504 113 859-355 32 286-506 113 859-357 32 859-358 32
286-503 113 857-354 50 286-594 114 286-505 113 857-357 50 857-358 50
857-364 50 288-554 101 857-367 50 857-368 50
288-504 101 288-761 102
288-758 102
287-814 104
287-834 104
789-504 152
2 changeover contacts Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page
DC
286-310 115 788-311 72 788-312 72 286-312 115 788-313 72 788-314 72 788-315 72 286-316 115
286-311 115 788-412 74 286-384 119 788-347 82 286-314 115 788-349 82 858-328 95
788-334 76 288-312 102 858-325 95 858-327 95
788-384 80 288-437 108 286-313 115 286-315 115
788-346 82 789-312 153 789-313 153 789-315 153
858-324 95 789-1346 156
AC
286-510 115 286-511 115 788-512 73 286-512 115 286-513 115 286-514 115 788-515 73 788-516 73
788-546 83 788-615 75 788-616 75
788-548 83 788-538 77
286-515 115 788-549 83
789-515 153 858-528 95
286-516 115
789-516 153
789-1549 157
AC/DC
288-512 102
789-512 153
4 changeover contacts Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page
DC
858-304 92 286-375 118 858-392 94 858-391 94
858-314 92
858-390 94
AC
286-578 118 858-508 93
858-518 93
286-579 118
Overview: Relay Modules
857 Series 859 Series 788 Series 286 Series 288 and 287 Series 789 Series
Relays with Changeover Contacts
858 Series
0
20
1 make contact Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page
DC
286-364 112 286-365 112 286-366 112
788-355 79
288-364 100
288-320 106
287-475 106
287-474 106
286-376 119
789-571 158
AC
286-564 112 286-566 112 286-567 112
789-570 158
AC/DC
857-1330 52 288-565 100 288-567 100
288-564 100
2 make contacts Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page
DC
286-326 116 286-327 116 286-328 116 286-329 116 286-330 116 286-332 116
AC
AC/DC
4 make contacts Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page
DC
286-350 118 286-351 118 286-352 118 286-353 118 286-354 118 286-355 118
789-352 154
AC
286-552 118 286-555 118 286-556 118
AC/DC
789-551 154 789-552 154
1 break contact Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page
DC
286-368 112 286-369 112 286-370 112
AC
286-568 112
AC/DC
288-568 100
1 break contact/
1 make contact
Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page Item No. Page
DC
286-318 116 286-319 116 286-320 116 286-321 116 286-322 116 286-324 116
286-906 120
286-571 121
AC
286-520 116 286-570 121
AC/DC
2 break contacts/
2 make contacts
DC
286-334 117 286-335 117 286-336 117 286-337 117 286-338 117 286-339 117
789-336 155
AC
286-536 117 286-540 117
AC/DC
789-535 155 789-536 155
1 break contact/
3 make contacts
DC
286-342 117 286-343 117 286-344 117 286-345 117 286-346 117 286-347 117
AC
286-544 117 286-547 117 286-548 117
AC/DC
Safety relays
4 break contacts/
4 make contacts
DC
288-412 109 288-413 109 288-435 108
288-422 109 288-423 109
AC
288-418 109
288-428 109
AC/DC
288-414 109 288-415 109 288-416 109
288-424 109 288-425 109 288-426 109
Relays with Make Contacts
Relays with break contacts and make contacts
0
21
Function Input Output
Max. Perm.
Continuous.
Current
859 Series 857 Series 788 Series 286 Series
Item No. Page Item No. Page Item No. Page Item No. Page
2-Wire Optocouplers
5 VDC
24 VDC
100 mA
859-795 40
60 VDC 859-793 39
24 VDC
24 VDC
859-796 40
859-794 41
2 A 857-724 58
3 A
859-730 42
859-740 42
3.5 A 788-700 84
5 A 788-701 84
2 x 24 VDC 0.5 A 857-1432 61
48 VDC 100 mA 857-704 54
60 VDC 100 mA
859-791 39 286-791 133
286-794 134
240 VAC 1 A
857-714 56
788-720 85
2 x 24 VDC 2 x 250 mA
286-790 135
2 x 24 VDC
286-792 134
2 x 3 ... 30 VDC 3 A 857-1430 60
2 x 9 .. 60 VDC 0.1 A 857-1494 60
24 V AC/DC 12 ... 275 VAC 2 A 788-721 85
115 V AC/DC
48 VDC 100 mA 857-707 54
240 VAC 1 A 857-717 56
24 VDC 2 A 857-727 58
230 V AC/DC
48 VDC 100 mA 857-708 55
240 VAC 1 A 857-718 57
24 VDC 2 A 857-728 59
2-Wire Optocouplers
with zero volt switch
5 VDC
230 VAC
0.5 A 859-902 47
1 A
286-732 132
12 VDC 286-733 132
24 VDC 286-734 132
3-Wire Optocouplers
positive switching
5 VDC 24 VDC
0.5 A
859-752 45 286-752/002-000 131
24 VDC
5 VDC 859-756 46 286-750 128
15 VDC 286-751 128
24 VDC
859-758 46 286-752 128
4 A 286-723 131
24 VDC
programmable (L or H)
300 mA 286-938 135
230 VAC
5 VDC
0.5 A
286-754 129
15 VDC 286-756 129
24 VDC 859-772 43 286-758 129
3-Wire Optocouplers
negative switching
5 VDC
24 VDC 0.5 A 859-702 44
110 VDC 1.6 A
286-726 132
12 VDC 286-728 132
24 VDC
5 VDC
0.5 A
859-706 45 286-700 128
15 VDC 286-701 128
24 VDC
859-708 44 286-702 128
2 A 286-720 130
3 A 859-720 41
5 A 286-721 130
110 VDC 1.6 A 286-730 132
230 VAC
5 VDC
0.5 A
286-704 129
15 VDC 286-706 129
24 VDC
859-712 43 286-708 129
10 ... 30 V AC/DC 1 ... 500 mA 286-725 133
Power Optocouplers
S0 current
meter interface
AC Output 286-740 136
DC Output 286-741 136
Supply Module
passive S0 current
meter interfaces
286-742 137
Nominal voltage Timer Range On-Delay O-Delay Pulsing Pulse Lengthening
1 changeover contact Item No. Page Item No. Page Item No. Page Item No. Page
24 VDC
0.1 s ... 1 s 286-600 122 286-440 124 286-460 125 286-426 123
1 s ... 10 s 286-602 122 286-442 124 286-462 125 286-427 123
10 s ... 100 s 286-604 122 286-444 124 286-464 125 286-428 123
230 VAC
0.1 s ... 1 s 286-610 122 286-446 124 286-470 125
1 s ... 10 s 286-612 122 286-448 124 286-472 125
10 s ... 100 s 286-614 122 286-450 124 286-474 125
Multirange Timing Relay
24 VAC, 115 VAC, 230 VAC, 24 VDC
0.3 s ... 3 s; 3 s ... 12 s
286-616 126
10 s ... 100 s; 100 s ... 800 s
Multifunction Timing Relays
24 VDC
0.3 s ... 3 s; 3 s ... 12 s
286-640 127
286-640/004-000 150
10 s ... 100 s; 100 s ... 800 s
Optocouplers
Timing Relay with Changeover Contact
859 Series 286 Series 857 Series 788 Series
Overview: Timing Relays, Optocouplers and Special Functions
0
22
Funktion
289 / 789 Series 286 Series
Item No. Page Item No. Page
NAMUR Switching Amplifiers
with relay output 250 VAC /120 VDC 286-880 138
with transistor output 24 VDC 286-881 138
Current Flow
Monitoring Modules
AC/DC 15 mA DC/35 mA ... 300 mA AC Optocoupler 286-659 140
AC 80 mA ... 6 A Transformer 286-661 140
AC 0.2 A ... 3 A 1 changeover contact 286-664 141
AC 1 A ... 10 A 1 changeover contact 286-665 141
DC 0.4 A ... 1.5 A 1 make contact 286-662 141
Switching Modules
1-pole changeover
with changeover rocker switch 286-895 139
with momentary switch 286-896 139
manual-0-automatic switch
789-323 159
with monitoring contact 789-325 160
with switch position monitoring 789-329 161
Bridge Rectifiers
230 V / 1 A AC 280-804/281-419 143
230 V / 1 A AC
with varistor protection
286-840 142
24 V / 1 A AC 286-830 142
Fuse Module
for replaceable microfuses 5 x 20 mm
Operating voltage 24 V AC/DC Blown fuse indication, LED green 286-890 144
Operating voltage 230 V AC/DC Blown fuse indication, neon lamp 286-891 144
Diode Gate Modules
common anode
3 diodes 286-803 145
5 diodes 286-805 145
7 diodes 286-807 145
9 diodes 286-809 145
common cathode
3 diodes 286-813 145
5 diodes 286-815 145
7 diodes 286-817 145
9 diodes 286-819 145
Polarized Diode Gate
common anode 14 diodes 289-121 212
common cathode 14 diodes 289-111 212
Open Diode Gate
with 8 diodes, individual connection possible
Diode 1 N 4007 289-101 210
Diode P 600 B 289-103 210
with 9 diodes, individual connection possible Diode 1 N 5408 289-105 211
AND Gate Module with 6 inputs, relay output with 1 make contact 286-826 146
Flip-Flop Module Operating voltage 24 VDC 286-825 147
LED Indicator Module with 8 LEDs common cathode 286-822 146
LED Gate Module with 16 LEDs
common anode 289-202 213
common cathode 289-201 213
Lamp Test Circuit with 20 diodes for testing 10 lamps 289-151 213
Open Resistor Gate with 8 resistors, individual connection possible 289-114 214
Resistor Gate with 1 end commoned, 8 resistors 289-113 214
Fault Indicator Modules,
with reset
Auxiliary and fault indication voltage 230 VAC Alarm with continuous light 286-681 148
60 VDC Alarm with continuous light 286-684 148
24 VDC Indication of original fault with single ashing light 286-683 149
Connection Modules
for sensors and actuators
8 x 3-conductor sensors
289-664 208
LED indicator for positive switching 289-665 208
LED indicator for negative switching 289-666 208
8 actuators
289-667 208
with ground (earth) contact 289-671 208
Special Functions
286 Series 289 Series
0
23
Function
Input Signal
(switchable in a calibrated way)
Output Signal
(switchable in a calibrated way)
Conguration Electrical Isolation
Supply
Voltage V
N Item No. Page
Isolation Amplier,
Congurable
0 ... 20 mA, 4 ... 20 mA, 0 ... 5 V,
0 ... 10 V, 2 ... 10 V, 1 ... 5 V
0 ... 20 mA, 4 ... 20 mA, 0 ... 5 V,
0 ... 10 V, 2 ... 10 V, 1 ... 5 V
DIP switch 3 ways, 2.5 kV 24 VDC 857-400 218
Isolation Amplier,
Congurable
with Digital Output
-10...+10 V, -20...+20 mA, 0...+30 V
(31.2 V (V
IN
) 100 mA (I
IN
)
0 ... 20 mA, 4 ... 20 mA,
0 ... 10 V, 2 ... 10 V, 0... 5 V, 1 ... 5 V,
0 ... 10 mA, 2 ... 10 mA
DIP switch or
conguration software
3 ways, 2.5 kV 24 VDC 857-401 220
Universal Isolation
Amplier
Congurable
60/100/150/300/500 mV;
0 ... 60/100/150/300/500 mV
1/5/10/100/200 V
0 ... 1/5/10/100/200 V
1 ... 5 V, 2 ... 10 V
0.3/1/5/10/20/50/100 mA
0 ... 0.3/1/5/10/20/50/100 mA
2 ... 10 mA, 4 ... 20 mA
5 V, 0 ... 5 V, 1 ... 5 V,
10 V, 0 ... 10 V, 2 ... 10 V
10 mA, 0 ... 10 mA, 2 ... 10 mA,
20 mA, 0 ... 20 mA, 4 ... 20 mA
DIP switch or
Push/Slide Switch
3 ways, 2.5 kV 24 VDC 857-402 222
Bipolar
Isolation Amplier
5 V, 0 ... 5 V, 1 ... 5 V, 10 V,
0 ... 10 V,2 ... 10 V, 10 mA,
0 ... 10 mA, 2 ... 10 mA, 20 mA,
0 ... 20 mA, 4 ... 20 mA
5 V, 0 ... 5 V, 1 ... 5 V, 10 V,
0 ... 10 V,2 ... 10 V, 10 mA,
0 ... 10 mA, 2 ... 10 mA,
20 mA, 0 ... 20 mA, 4 ... 20 mA
Isolation ampliers,
xed setting
0(4) ... 20 mA 0(4) ... 20 mA
_ 3 ways, 2.5 kV 24 VDC
857-411
226
0(2) ... 10 V 0(2) ... 10 V 857-412
0 ... 10 V 0 ... 20 mA 857-413
0 ... 10 V 4 ... 20 mA 857-414
0 ... 20 mA 0 ... 10 V 857-415
4 ... 20 mA 0 ... 10 V 857-416
Repeater Power Supply 0 ... 20 mA, 4 ... 20 mA
0 ... 20 mA, 4 ... 20 mA, 0 ... 5 V,
0 ... 10 V, 2 ... 10 V, 1 ... 5 V
Repeater Power Supply
HART
4 ... 20 mA 4 ... 20 mA - 3 ways, 2.5 kV 24 VDC 857-421 230
Signal Splitter
0 ... 20 mA, 4 ... 20 mA, 0 ... 5 V,
0 ... 10 V, 2 ... 10 V, 1 ... 5 V
2 x 0(4) ... 20 mA DIP switch 4 ways, 2.5 kV 24 VDC 857-423 232
Loop-Powered
Isolation Amplier
5/10/20 mA
0 ... 5/10/20 mA
2 ... 10 mA, 4 ... 20 mA
1/5/10/20/2 V
0 ... 1/5/10/20/2 V
1 ... 5 V, 2 ... 10 V
4 ... 20 mA DIP switch 2 ways, 2.5 kV _ 857-450 234
Passive Isolator
1-Channel
0(4) ... 20 mA 0(4) ... 20 mA _ 2 ways, 2.5 kV 24 VDC 857-451 236
Passive Isolator
2-Channel
0(4) ... 20 mA 0(4) ... 20 mA _ 2 ways, 2.5 kV 24 VDC 857-452 237
Function Input Signal Connection Output Signal Conguration
Electrical
Isolation
Supply Voltage
V
N Item No. Page
Temperature
Transducers for RTD
Pt 100, Pt 200, Pt 500, Pt 1000
0 1 k, 0 4.5 k
2 wire, 3 wire,
4 wire
0 ... 20 mA, 4 ... 20 mA,
0 ... 10 V, 2 ... 10 V, 0 ... 5 V,
1 ... 5 V, 0 ... 10 mA, 2 ... 10 mA
Temperature
Transducers for RTD
Pt 100, Pt 200, Pt 500, Pt 1000
0 1 k, 0 4.5 k
2 wire, 3 wire,
4 wire
0 ... 20 mA, 4 ... 20 mA,
0 ... 10 V, 2 ... 10 V, 0 ... 5 V,
1 ... 5 V, 0 ... 10 mA, 2 ... 10 mA
DIP switch or con-
guration Software
3 ways, 2.5 kV 24 VDC 857-801 240
Temperature
Transducers for
Thermocouples
Thermocouples of types J and K
0 ... 20 mA, 4 ... 20 mA,
0 ... 10 V, 2 ... 10 V, 0 ... 5 V,
1 ... 5 V, 0 ... 10 mA, 2 ... 10 mA
Temperature
Transducers for
Thermocouples
Thermocouples of types J and K
0 ... 20 mA, 4 ... 20 mA,
0 ... 10 V, 2 ... 10 V, 0 ... 5 V,
1 ... 5 V, 0 ... 10 mA, 2 ... 10 mA
DIP switch or con-
guration Software
3 ways, 2.5 kV 24 VDC 857-811 244
Ni Transducer Ni sensors
0 ... 10 mA, 2 ... 10 mA, 0 ... 20 mA,
4 ... 20 mA, 0 ... 5 V, 1 ... 5 V,
0 ... 10 V, 2 ... 10 V
Millivolt Transducer
-100 mV ... +100 mV,
0 mV ... 200 mV to 0 mV ... 1000 mV
(in steps of 100)
0 ... 20 mA, 4 ... 20 mA,
0 ... 10 V, 2 ... 10 V, 0... 5 V, 1 ... 5 V,
0 ... 10 mA, 2 ... 10 mA
DIP switchor congu-
ration Software
3 ways, 2.5 kV 24 VDC 857-819 248
KTY Transducer KTY sensors
0 ... 10 mA, 2 ... 10 mA, 0 ... 20 mA,
4 ... 20 mA, 0 ... 5 V, 1 ... 5 V,
0 ... 10 V, 2 ... 10 V
Potentiometer Position
Transducer
Potentiometers and resistors
0 ... 10 V, 2 ... 10 V, 0 ... 5 V,
1 ... 5 V, 0 ... 20 mA, 4 ... 20 mA
0 ... 10 mA, 2 ... 10 mA
DIP switch or
Push/Slide Switch
2 ways, 2.5 kV 24 VDC 857-809 252
Frequency transducer
Frequency generators, NAMUR
sensors, NPN/PNP transistor outputs;
mechanical contacts
0 ... 5 V, 1 ... 5 V, 0 ... 10 V,
2 ... 10 V, 0 ... 10 mA, 2 ... 10 mA,
0 ... 20 mA, 4 ... 20 mA
Threshold Value Switch
-10...+10 V, -20...+20 mA, 0...+30 V
(31.2 V (V
IN
) 100 mA (I
IN
)
1 changeover contact
1 digital switching output
DIP switch, Push/
Slide Switch, congu-
ration Software
4 ways, 2.5 kV 24 VDC 857-531 260
Current transducer 0 ... 1 A AC/DC; 0 ... 5 A AC/DC
0 ... 5 V, 1 ... 5 V, 0 ... 10 V,
2 ... 10 V, 0 ... 10 mA, 2 ... 10 mA,
0 ... 20 mA, 4 ... 20 mA
Rogowski Transducer RC1 500 A; RC2A 2000 A; RC2B
0 ... 5 V, 1 ... 5 V, 0 ... 10 V,
2 ... 10 V, 0 ... 10 mA, 2 ... 10 mA,
0 ... 20 mA, 4 ... 20 mA
DIP switch 2 ways, 2.5 kV _ 857-552 264
Overview: Transducers
JUMPFLEX
Transducers
0
24
Function Input Output Electrical Isolation Supply Voltage V
N
Item No. Page
Signal Conditioning
Modules for Standard Signals
0 10 V
0 10 V
2 ways, 4 kV
24 VDC
786-301 278
3 ways, 4 kV 786-321 278
0 20 mA
2 ways, 4 kV 786-302 278
3 ways, 4 kV 786-322 278
4 20 mA
2 ways, 4 kV 786-303 278
3 ways, 4 kV 786-323 278
0 20 mA
0 10 V
2 ways, 4 kV
24 VDC
786-304 279
3 ways, 4 kV 786-324 280
0 20 mA
2 ways, 4 kV 786-305 279
3 ways, 4 kV 786-325 280
4 20 mA
2 ways, 4 kV 786-306 279
3 ways, 4 kV 786-326 280
4 20 mA
0 10 V
2 ways, 4 kV
24 VDC
786-307 279
3 ways, 4 kV 786-337 280
0 20 mA
2 ways, 4 kV 786-308 279
3 ways, 4 kV 786-338 280
4 20 mA
2 ways, 4 kV 786-309 279
3 ways, 4 kV 786-339 280
Function Input Temperature Range Connection Output Electrical Isolation
Supply Voltage
V
N Item No. Page
Temperature
Transducers
Pt 100
0 C ... 100 C
2 wire
0 10 V
24 VDC
286-860 272
3 wire 286-870 272
2 wire
0 20 mA
286-861 272
3 wire 286-871 272
2 wire
4 20 mA
286-862 272
3 wire 286-872 272
-30 C ... +150 C
2 wire
0 10 V
24 VDC
286-860/150--030 274
3 wire 286-870/150--030 274
2 wire
0 20 mA
286-861/150--030 274
3 wire 286-871/150--030 274
2 wire
4 20 mA
286-862/150--030 274
3 wire 286-872/150--030 274
0 C ... 300 C
2 wire
0 10 V
24 VDC
286-860/000-300 275
3 wire 286-870/000-300 275
2 wire
0 20 mA
286-861/000-300 275
3 wire 286-871/000-300 275
2 wire
4 20 mA
286-862/000-300 275
3 wire 286-872/000-300 275
Pt 1000 0 C ... 100 C 2 wire
0 10 V
24 VDC
286-873 276
0 20 mA 286-874 276
4 20 mA 286-875 276
Thermocouple
Type J
0 C ... 750 C
0 10 V
24 VDC
286-863 273
0 20 mA 286-865 273
4 20 mA 286-867 273
Thermocouple
Type K
0 C ... 1000 C
0 10 V
24 VDC
286-864 273
0 20 mA 286-866 273
4 20 mA 286-868 273
786 Seriea
286 Series
Signal Conditioning Modules
Temperature Transducers
0
25

857 Series
JUMPFLEX
Transducers / Relay and

Optocoupler Modules

Connection of conductor

Easy commoning using
adjacent jumpers

Marking using WMB Multi markers

859 Series
Relay Modules and
Optocoupler Modules


adjacent jumpers

Marking using Miniature quick
marking card

Operation of the relay ejector

Conguration of the Transducers with
WAGO-USB-Service-Cable 750-923

Installation Notes
0
26

788 Series
Sockets for Miniature Switching Relay /
Optocoupler


adjacent jumpers

Marking using WMB Multi markers and
group marker carriers

858 Series

adjacent jumpers

Remove jumper with screwdriver

0
27

789 Series Relay Modules in
DIN-Rail Mounted Enclosure


adjacent jumpers

Marking using Miniature quick marking
card

287 / 288 Series Mounting Carriers
with Miniature Switching Relay

front-entry

side-entry

Assembly of a module on the
carrier rail

Removal of a module from the
carrier rail

286 / 786 Series
Pluggable Function Modules

Coding ensures correct polarity

Pluggable electronic modules, for
application on 2- or 4-conductor
carrier terminal blocks

Marking using WMB Multi markers

Easy testing at touchproof contacts
Installation Notes
0
28

289 Series Interface Modules

front-entry

side-entry


Assembly of a module on the
carrier rail

Removal of a module from the
carrier rail


Mounting carrier, gray, snap-t mounting
of universal mounting feet

Fitting of an individual module to the
mounting carrier

Removal of an individual module from the
mounting carrier
0
29
WAGO Application: Cerestar (Cargill GmbH),
Barby, Saxony-Anhalt, Germany
Manufacturer of starches and starch derivatives.
WAGO Products:
Matrix Patchboards and Pluggable Electronic
Modules
1
30
1
1
858 Series
Sockets with Industrial Relay 92 95
Industrial Relays, Sockets 96 97
Accessories, 858 Series 98
857 Series
JUMPFLEX
Relay Socket with Miniature Switching Relay 50 52

JUMPFLEX
Relay Socket with Solid State Relay 54 61

JUMPFLEX
Interface Adapters 62 63
WAGO Ribbon Cables 64 67
Miniature Switching Relays, Solid State Relays, Sockets, Accessories, 857 Series 68 71
788 Series
Sockets with Miniature Switching Relay 72 83
Sockets with Solid State Relay 84 85
Miniature Switching Relays, Sockets 86 89
Accessories, 788 Series 90 91
287/288 Series
Mounting Carriers with Miniature Switching Relay 100 111
286 Series
Pluggable Modules Relays, Time Relays, Optocouplers,
S0 Optocouplers, S0 Supply Module, NAMUR Switching Amplifiers,
Current Flow Monitoring, Switches, Bridge Rectifiers,
Fuses, Diode Gates, AND Gate and LED Indicator,
Flip-Flop, Fault Indication 112 151
859 Series
Rail-Mounted Terminal Blocks with Miniature Switching Relay 32 38
Rail-Mounted Terminal Blocks with Optocoupler 39 47
Rail-Mounted Terminal Blocks with Miniature Switching Relays and Optocouplers
with an Extended Input Voltage and Operating Temperature Rangeh 48
789 Series
Relay Modules in DIN-Rail Mounted Enclosure 152 161
Accessories, Series 789 162
Current Sensor with Bus Connection in DIN-Rail Mountable Enclosure 164 169
3-Channel Rogowski Signal Conditioner 170
4-Channel EnOcean Radio Receiver in DIN-Rail-Mountable Enclosure 172
Manual Control Modules 173
1
31
1
32
Rail-Mounted Terminal Blocks with Miniature Switching Relay
Relay with 1 changeover contact (1u)
for normal switching power
Nominal input voltage V
N

5 V, 12 V, 24 V, 48 V, 60 V, 110 V, 220 V DC
N

12 V, 24 V, 48 V, 115 V, 230 V AC/DC
Note: Inductive loads have to be attenuated by an
appropriate protective circuit in order to protect relay coils
and contacts.
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Rail-mounted terminal blocks with miniature
switching relay, for DIN 35 rail
5 V DC 31 mA 859-302 1 12 V AC/DC 15 mA 859-353 1
12 V DC 17 mA 859-303 1 24 V AC/DC 8 mA 859-354 1
24 V DC 10 mA 859-304 1 48 V AC/DC 5.3 mA 859-355 1
48 V DC 6.5 mA 859-305 1 115 V AC/DC 3.5 mA 859-357 1
60 V DC 5.2 mA 859-306 1 230 V AC/DC 3.5 mA 859-358 1
120 V DC 3.5 mA 859-307 1
220 V DC 3.2 mA 859-308 1
Technical Data Accessories see page 49 Accessories see page 49
Contact material AgSnO
2
AgSnO
2
Input voltage range V
N
-15 % ... +10 % V
N
-15 % ... +10 %
Max. switching voltage 250 V AC 250 V AC
Max. continuous current (terminal blocks in a row) 5 A 5 A
Max. Switching power (resistive) 1250 VA AC ; DC see load limit curve 1250 VA AC ; DC see load limit curve
Recommended minimum load t 100 mA / 12 V AC/DC t 100 mA / 12 V AC/DC
Max. switching rate with / without load 6 min
-1
/ 20 s
-1
6 min
-1
/ 20 s
-1
Operating power < 320 mW < 300 mW
Pull-in/drop-out/bounce time typ. 5 ms / 6 ms / 5 ms 5 ms / 6 ms / 5 ms
Nominal operating mode continuous duty continuous duty
Dielectric strength contact-coil 4 kV 4 kV
Dielectric strength contact-coil (1.2/50 s) 6 kV 6 kV
Surge capacity open contact 1 kV 1 kV
Nominal voltage acc. to VDE 0110 Part 1/4.97,
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Mechanical life 5 x 10
6
switching operations 5 x 10
6
switching operations
Mechanical life at max. load (resistance) 3 x 10
5
4
Ambient operating temperature (V
N
) -25 C ... +50 C -25 C ... +50 C
Ambient operating temperature (1.2 x V
N
) -25 C ... +40 C -25 C ... +40 C
Storage temperature -40 C ... +70 C -40 C ... +70 C
Dimensions (mm) W x H x L 6 x 56 x 91 6 x 56 x 91
Height from upper-edge of DIN 35 rail Height from upper-edge of DIN 35 rail
Wire connection CAGE CLAMP
CAGE CLAMP
Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 14 0.08 mm ... 2.5 mm / AWG 28 ... 14
Stripped lengths 5 ... 6 mm / 0.22 in 5 ... 6 mm / 0.22 in
Approvals VDE 0110 / EN 60664; VDE 0435 / EN 61810-5;
UL 508; EEx nC II T4 / DEMKO 02 ATEX 132280U; g
VDE 0110 / EN 60664; VDE 0435 / EN 61810-5;
A1
+
14
12
11
A2

14
12
11
A1

A2

1
33
1
Contacts 5 m Au hard gold plated
N
24 V DC
with an extended
Input voltage range: V
N
-30 % ... +25 %
Operating temperature range: -25 C ... +70 C
N
115 V DC
* In order to prevent the gold layer from being damaged
these values should not be exceeded. Higher switching
power leads to evaporation of the gold layer. The resulting
deposits in the enclosure may cause sparkovers between
the coil and the contact.
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
24 V DC 10 mA 859-314 1 115 V DC 3.1 mA 859-317 1
2
+ 5 m Au AgSnO
2
+ 5 m Au
N
-15 % ... +20 % V
N
-30 % ... +25 %
Max. switching voltage 36 V DC * 36 V DC *
Max. continuous current (terminal blocks in a row) 50 mA * 50 mA *
Recommended minimum load 10 A / 100 mV 10 A / 100 mV
-1
/ 20 s
-1
6 min
-1
/ 20 s
-1
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
6
6
N
) -25 C ... +50 C -25 C ... +70 C
N
) -25 C ... +40 C
CAGE CLAMP
VDE 0110 / EN 60664; VDE 0435 / EN 61810-5;
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

A1
+
14
12
11
A2

A1
+
14
12
11
A2

1
34
N
230 V AC
N
115 V AC
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
230 V AC 3.5 mA 859-359 1 115 V AC 3.1 mA 859-360 1
2
+ 5 m Au AgSnO
2
+ 5 m Au
N
-15 % ... +10 % V
N
-15 % ... +20 %
Max. switching voltage 36 V DC * 36 V DC *
Max. continuous current (terminal blocks in a row) 50 mA * 50 mA *
Recommended minimum load 10 A / 100 mV 10 A / 100 mV
-1
/ 20 s
-1
6 min
-1
/ 20 s
-1
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
6
6
N
) -25 C ... +50 C -25 C ... +50 C
N
) -25 C ... +40 C -25 C ... +40 C
CAGE CLAMP
VDE 0110 / EN 60664; VDE 0435 / EN 61810-5;
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

14
12
11
A1
~
A2
~
14
12
11
A1
~
A2
~
1
35
1
for low switching power
N
220 V DC
N
115 V AC
* In order to prevent the gold layer from being
damaged these values should not be exceeded.
Higher switching power leads to evaporation of the
gold layer. The resulting deposits in the endosure may
cause sparkover between the coil and the contact.
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
220 V DC 3.2 mA 859-318 1 115 V AC 4.2 mA 859-367 1
2
+ 5 m Au AgSnO
2
N
-15 % ... +20 % V
N
10 %
Turn-on threshold relay/LED 95 V AC/ 80 V AC
Turn-off threshold relay/LED 60 V AC/60 V AC
Max. switching voltage 36 V DC * 250 V AC
Max. continuous current (terminal blocks in a row) 50 mA * 5 A
Max. Switching power (resistive) 1250 VA AC ; DC see load limit curve
Recommended minimum load 50 mW t 100 mA / 12 V AC/DC
-1
/ 20 s
-1
6 min
-1
/ 20 s
-1
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
6
4
switching operation
N
) -25 C ... +50 C -25 C ... +50 C
CAGE CLAMP
Approvals VDE 0435 (corresp. parts); DIN EN 61810;
DIN VDE 0140, DIN EN 61140 E175199, UL 508; g
DIN VDE 0160, DIN EN 50178; VDE 0435
(corresp. parts); DIN EN 61810; VDE 0140,
DIN EN 61140; g
1
36
defined turn-on/turn-off threshold
N
230 V AC
with an extended
N
-30 % ... +25 %
N
24 V DC
and contacts.
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
230 V AC 4.2 mA 859-368 1 24 V DC 12 mA 859-390 1
2
AgSnO
2
N
10 % V
N
-30 % ... +25 %
Turn-on threshold relay/LED 190 V AC / 165 V AC
Turn-off threshold relay/LED 140 V AC / 150 V AC
-1
/ 20 s
-1
6 min
-1
/ 20 s
-1
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
4
switching operation 3 x 10
5
switching operation
N
) -25 C ... +50 C -25 C ... +70 C
CAGE CLAMP
VDE 0110 / EN 60664; VDE 0435 / EN 61810-5;
14
12
11
A1
~
A2
~
14
12
11
A1
+
A2

1
37
1
with an extended
N
30 %
N
110 V DC
with an extended
N
40 %
N
24 V DC
NOTE: Inductive loads have to be attenuated by an
appropriate protective circuit in order to protect relay
coils and contacts.
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
110 V DC 2.7 mA 859-391 1 24 V DC 14.4 mA 859-398 1
2
AgSnO
2
N
30 % V
N
40 %
-1
/ 20 s
-1
6 min
-1
/ 20 s
-1
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
7
4
switching operation 3 x 10
4
switching operation
N
) -25 C ... +70 C -25 C ... +70 C
CAGE CLAMP
DIN VDE 0160 and IEC 60255; VDE 0435
(corresp. parts); DIN VDE 0140, DIN EN 61140;
DIN VDE 0115 Part 200; DIN EN 50155; g
14
12
11
A1
+
A2

1
38
with an extended
N
-30 % ... +25 %
N
24 V DC
Description V
N
I
N
Item No.
Pack.
Unit
24 V DC 10 mA 859-392 1
Technical Data Accessories see page 49
2
+ 5 m Au
N
-30 % ... +25 %
Max. switching voltage 36 V DC *
Max. continuous current (terminal blocks in a row) 50 mA *
Recommended minimum load 10 A / 100 mV
-1
/ 20 s
-1
Operating power < 320 mW
Pull-in/drop-out/bounce time typ. 5 ms / 6 ms / 5 ms
Nominal operating mode continuous duty
Dielectric strength contact-coil 4 kV
Dielectric strength contact-coil (1.2/50 s) 6 kV
Surge capacity open contact 1 kV
IEC 60664-1
250 V / 4 kV / 3
6
7
N
) -25 C ... +70 C
Storage temperature -40 C ... +70 C
Dimensions (mm) W x H x L 6 x 56 x 91
Height from upper-edge of DIN 35 rail
Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 14

Stripped lengths 5 ... 6 mm / 0.22 in
VDE 0115 Part 200 / EN 50155; UL 508;
EEx nC II T4 / DEMKO 02 ATEX 132280U; g
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

14
12
11
A1
+
A2

1
1
39
Rail-Mounted Terminal Blocks with Optocoupler
Optocoupler
Input: 5 V DC
Output: 60 V DC/100 mA
with an extended output voltage and
operating temperature range for use in
railway traffic
Optocoupler
Input: 24 V DC
with an extended output voltage and
operating temperature range for use in
railway traffic
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
Rail-mounted terminal blocks with optocoupler, for
DIN 35 rail
5 V DC 859-793 1 24 V DC 859-791 1
Nominal input voltage (V
N
) 5 V DC 24 V DC
Input voltage range low level 0 V ... 0.8 V DC 0 V ... 5 V DC
Input voltage range high level 2 V ... 6.25 V DC 16 V ... 30 V DC
Input current range 1.3 mA ... 10 mA DC 2 mA ... 5.5 mA DC
Current at nominal voltage 7.5 mA DC 4 mA DC
Output nominal voltage 24 V DC 24 V DC
Output voltage range 3 V ... 60 V DC 7 V ... 60 V DC
Max. continuous current (20C) 100 mA 100 mA
Reverse voltage transistor 100 V 100 V
Switch on /switch off time 20 s / 120 s 20 s / 120 s
Max. operating frequency 1.5 kHz 3 kHz
Leakage current at nominal voltage 25 A 30 A
Voltage drop at output d 2.5 V d 1.5 V
Test voltage input / output 2.5 kV eff. 4 kV eff.
Ambient operating temperature -25 C ... +40 C -25 C ... +40 C
Max. operating temperature with reduced current +70 C +70 C
CAGE CLAMP
VDE 0115 Part 200 / EN 50155; UL 508; EEx nA II T4 /
DEMKO 02 ATEX 132280U
VDE 0110 / EN 60664; VDE 0435 / EN 61810-5;
VDE 0115 Part 200 / EN 50155; UL 508; EEx nA II T4 /
DEMKO 02 ATEX 132280U
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

A1
+
A2
1
+
2
RL
A1
+
A2

1
+
2
RL
1
40
Optocoupler
Input: 24 V DC
Optocoupler
Input: 5 V DC
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 859-796 1 5 V DC 859-795 1
N
) 24 V DC 5 V DC
Input voltage range low level 0 V ... 5 V DC 0 V ... 0.8 V DC
Input voltage range high level 18 V ... 30 V DC 2 V ... 6.25 V DC
Input current range 3.8 mA ... 12.5 mA DC 3.8 mA ... 23 mA DC
Current at nominal voltage 9.2 mA DC 17.5 mA DC
Max. operating frequency 10 kHz 10 kHz
Voltage drop at output d 1 V d 1 V
Test voltage input / output 2.5 kV eff. 2.5 kV eff.
Max. operating temperature with reduced current +70 C +70 C
CAGE CLAMP
UL 508; EEx nA II T4 / DEMKO 02 ATEX 132280U
VDE 0110 / EN 60664; VDE 0435 / EN 61810-5;
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

A1
+
A2

1
+
2
RL
A1
+
A2

1
+
2
RL
1
1
41
Optocoupler
Input: 24 V DC
Optocoupler
Input: 24 V DC
Output: 24 V DC/3 A
Negative switching
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 859-794 1 24 V DC 859-720 1
N
) 24 V DC 24 V DC
Input voltage range 16 V ... 30 V DC
Input voltage range low level 0 V ... 5 V DC
Input voltage range high level 16 V ... 30 V DC
Input current range 2 mA ... 5.5 mA DC 2.5 mA ... 5.5 mA DC
Current at nominal voltage 4.2 mA DC 4 mA DC
Max. continuous current 3 A
Max. continuous current (20C) 100 mA
Peak output current 20 A
Max. operating frequency 1.5 kHz
Switching frequency f < 500 Hz
IL < 2 A / IL < 1 A / IL < 500 mA f < 1 kHz / f < 2 kHz / f < 3 kHz
Leakage current at nominal voltage 25 A < 25 A
Collector / emitter voltage drop Vce sat d 0.5 V
Voltage drop at output d 2 V
CAGE CLAMP
VDE 0110 / EN 60664; VDE 0435 / EN 61810-5;
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

A1
+
A2

1
+
2
RL
A1
+
A2
RL
0V
A
24V
1
42
Optocoupler
Input: 24 V DC
Output: 24 V DC/3 A
Optocoupler
Input: 24 V DC
Output: 3V ... 30 V DC/3A
3 A power optocoupler
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 859-730 1 24 V DC 859-740 1
N
) 24 V DC 24 V DC
Input voltage range low level 0 V ... 5 V DC 0 V ... 9 V DC
Input voltage range high level 15 V ... 27 V DC 19 V ... 27 V DC
Current at nominal voltage 14 mA DC 7 mA DC
Input wiring Status LED (red) status indication LED (yellow), reverse voltage protection
Output circuit 2-wire, isolated 2-wire, isolated, overvoltage protection
Max. continuous current 3 A 3 A
Peak output current 25 A 25 A
Reverse voltage transistor 55 V
Voltage drop < 0.4 V < 0.2 V
Switching frequency f < 350 Hz f < 350 Hz
CAGE CLAMP
IEC 60664 / IEC 60664A / DIN VDE 0110;
degree of pollution 2,
overvoltage category III
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

A1
+
A2

RL
+A
-2
-2
13+
14
A2
A1
+
1
1
43
Optocoupler
Input: 230 V AC
Output: 24 V DC/0.5 A
Positive switching increased input frequency
up to 100 Hz
Input voltage up to 270 V AC
Optocoupler
Input: 230 V DC
Output: 24 V DC/0.5 A
Negative switching
859-772
Increased input frequency up to 100 Hz
Input voltage up to 270 V AC
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
DIN 35 rail
230 V AC 859-772 1 230 V AC 859-712 1
N
) 230 V AC/ 50 Hz ... 60 Hz 230 V AC
Input voltage range low level 0 V ... 90 V AC 0 V ... 90 V AC
Input voltage range high level 175 V ... 270 V AC 175 V ... 250 V AC
Input current range 0.04 mA ... 0.7 mA 0.4 mA ... 0.7 mA
Current at nominal voltage 0.6 mA 0.6 mA
Input wiring Varistor 300 V Varistor 300 V
Output circuit Protection diode, operation indicator Protection diode, operation indicator LED (red)
Max. continuous current 500 mA 500 mA
Switch on /switch off time < 30 ms / < 30 ms < 30 ms / < 30 ms
Collector / emitter voltage drop Vce sat < 1.2 V < 1.2 V
Max. output (reverse current) 12 mA 11 mA
CAGE CLAMP
Approvals VDE 0110 / EN 60664; UL 508;
EEx nA II T4 / DEMKO 02 ATEX 132280U
VDE 0110 / EN 60664; UL 508;
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

RL
1
+
3
2
24 V
A
0 V
A2
~
A1
~
A2
~
A1
~
0 V
+24 V
A
RL
1
44
Optocoupler
Input: 5 V DC
Output: 24 V DC/0.5A/25 kHz
Negative switching
Optocoupler
Input: 24 V DC
Negative switching
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
DIN 35 rail
5 V DC 859-702 1 24 V DC 859-708 1
N
) 5 V DC 24 V DC
Input voltage range high level 4 V ... 6.25 V DC 19 V ... 30 V DC
Input current range 7 mA ... 13 mA 5.7 mA ... 10.2 mA
Input wiring Reverse voltage protection Reverse voltage protection
Output circuit Protection diode, operation indicator LED (red) Protection diode, operation indicator LED (red)
Switch on /switch off time < 7 s / < 15 s < 10 s / < 10 s
Leakage current at nominal voltage < 10 A < 10 A
CAGE CLAMP
VDE 0110 / EN 60664; UL 508;
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

A2

A1
+
0 V
+24 V
A
RL
A2
A1
+
0 V
+24 V
A
RL
1
1
45
Optocoupler
Input: 24 V DC
Negative switching
Optocoupler
Input: 5 V DC
Output: 24 V DC/0.5 A/10 kHz
Positive switching
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 859-706 1 5 V DC 859-752 1
N
) 24 V DC 5 V DC
Input current range 8 mA ... 14 mA 7 mA ... 13 mA
Current at nominal voltage 11 mA DC 10 mA
Output voltage range 4 V ... 6.25 V DC 20 V ... 30 V DC
Max. output (reverse current) 7 mA 12.5 mA
CAGE CLAMP
VDE 0110 / EN 60664; UL 508;
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

A2

A1
+
0 V
+5 V
A
RL
A2

A1
+
0 V
+24 V
A
RL
1
46
Optocoupler
Input: 24 V DC
Positive switching
Optocoupler
Input: 24 V DC
Positive switching
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 859-758 1 24 V DC 859-756 1
N
) 24 V DC 24 V DC
Input current range 5.5 mA ... 10.6 mA 8 mA ... 14.5 mA
Current at nominal voltage 8 mA 11 mA
Output voltage range 20 V ... 30 V DC 4 V ... 6.25 V DC
Max. output (reverse current) 11 mA 4.5 mA
CAGE CLAMP
VDE 0110 / EN 60664; UL 508;
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

A2

A1
+
0 V
+24 V
A
RL
A2

A1
+
0 V
+5 V
A
RL
1
1
47
Optocoupler
Input: 5 V DC
Output: 230 V AC/0.5 A
Description V
N
Item No.
Pack.
Unit
DIN 35 rail
5 V DC 859-902 1
N
) 5 V DC
Input voltage range low level 0 V ... 1 V DC
Input voltage range high level 4 V ... 6.25 V DC
Input current range DC 5.6 mA ... 10.3 mA
Current at nominal voltage 7.7 mA DC
Input wiring Reverse voltage protection
Output circuit varistor /RC module
Output nominal voltage 230 V AC
Output voltage range 24 V ... 260 V AC (50 Hz ... 60 Hz)
Surge current (t=20 ms) 30 A
Min. load current 50 mA
Peak reverse voltage Triac 600 V
Switch on /switch off time 10 ms / 10 ms (1 half-wave)
Leakage current at nominal voltage < 1 mA
Voltage drop at output < 1 V
Test voltage input / output 2.5 kV eff.
Ambient operating temperature -25 C ... +55 C

Approvals IEC 60664 / IEC 60664A / DIN VDE 0110;
degree of pollution 2,
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

1
48
Rail-Mounted Terminal Blocks with Miniature Switching Relays and Optocouplers
with an extended input voltage and operating temperature range V
N
-30 % ... +25 % Ambient operating temperature -25 C ... +70 C
Rail-mounted terminal blocks with miniature switching relay Rail-mounted terminal blocks with optocouplers
Description
Nominal input
voltage (V
N
)
Input voltage range Max. switching capacity
Ambient operating
temperature (V
N
)
Item No.
Pack.
Unit
Relay with 1 changeover contact 115 V DC V
N
-30 % ... +25 % Contact 5 m Au -25 C ... +70 C 859-317 1
N
-30 % ... +25 % Contact 5 m Au -25 C ... +70 C 859-384 1
N
-40 % ... +25 % Contact 5 m Au -25 C ... +70 C 859-386 1
N
-30 % ... +25 % 250 V AC / 3 A -25 C ... +70 C 859-390 1
N
30 % 250 V AC / 3 A -25 C ... +70 C 859-391 1
N
-30 % ... +25 % Contact 5 m Au -25 C ... +70 C 859-392 1
N
-30 % ... +25 % 250 V AC / 3 A -25 C ... +70 C 859-393 1
N
-30 % ... +25 % 250 V AC / 3 A -25 C ... +70 C 859-394 1
N
40 % 250 V AC / 3 A -25 C ... +70 C 859-397 1
N
40 % 250 V AC / 3 A -25 C ... +70 C 859-398 1
N
40 % 250 V AC / 3 A -25 C ... +70 C 859-399 1
Optocoupler, 2-wire output 24 V DC V
N
-25 % ... +25 % 3 V ... 60 V DC / 50 mA -25 C ... +70 C 859-794 1
For additional technical data see: www.wago.com
1
1
49
Accessories, 859 Series
Operating tool Wire connection Marking pen
with fibre tip
Test pin End and
intermediate plate
Description Item No. Pack. Unit
End and intermediate plate; 1 mm / 0.039 in thick, gray 859-525 100 (4x25)
Test pin; 1 mm / 0.039 in; test wire for sold. onto test plug 859-500 1 (1x1)
Marking pen for permanent marking 210-110 1
Operating tool, with partially insulated shaft Type 2, blade (3.5 x 0.5) mm 210-720 1
Push-in type jumper bar Commoning
Push-in type jumper bars, light gray, insulated, 18 A 2-way 859-402 200 (8x25)
3-way 859-403 200 (8x25)
4-way 859-404 200 (8x25)
5-way 859-405 200 (8x25)
6-way 859-406 100 (4x25)
7-way 859-407 100 (4x25)
8-way 859-408 100 (4x25)
9-way 859-409 100 (4x25)
10-way 859-410 100 (4x25)
Item no. suffix for colored push-in type jumper bars yellow ... /000-029
red ... /000-005
blue ... /000-006
Miniature quick marking card Marking
Miniature WSB Quick marking system plain 248-501 5 cards
Marking software and printer/plotter see Section 8
Marking 1 ...10 (10 x) 248-502 5 cards
11 ... 20 (10x) 248-503 5 cards
21 ... 30 (10x) 248-504 5 cards
31 ... 40 (10x) 248-505 5 cards
41 ... 50 (10 x) 248-506 5 cards
1 ... 50 (2 x) 248-566 5 cards
K 1 ... K 10 (10 x) 248-450 5 cards
K 11 ... K 20 (10 x) 248-451 5 cards
K 100 (10 x) 248-452 5 cards
U 1 ... U 10 (10 x) 248-453 5 cards
U 11 ... U 20 (10 x) 248-454 5 cards
U 100 (10 x) 248-455 5 cards
10 strips with 10 markers, white with black printing
1
50
JUMPFLEX
Relay Socket with Miniature Switching Relay

Nominal input voltage
V
N
12 V, 24 V, 48 V, 60 V, 110 V, 220 V DC
V
N
24 V, 115 V, 230 V AC/DC
and contacts.
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
JUMPFLEX
relay socket with miniature switching

relay, for DIN 35 rail
12 V DC 17 mA 857-303 1 24 V AC/DC 8.5 mA 857-354 1
24 V DC 10 mA 857-304 1 115 V AC/DC 4 mA 857-357 1
48 V DC 6.5 mA 857-305 1 230 V AC/DC 3.5 mA 857-358 1
60 V DC 5.2 mA 857-306 1
110 V DC 3.5 mA 857-307 1
220 V DC 3.2 mA 857-308 1
Technical Data Accessories see pages 68 ... 71 Accessories see pages 68 ... 71
2
AgSnO
2
N
-15 % ... +20 % V
N
-15 % ... +20 % (857-354/857-357)
V
N
-15 % ... +10 % (857-358)
Max. Switching power (resistive) 1250 VA AC; DC see load limit curve 1250 VA AC; DC see load limit curve
-1
/ 20 s
-1
6 min
-1
/ 20 s
-1
Operating power < 300 mW / < 700 mW < 300 mVA / < 800 mVA
eff
4 kV
eff
eff
1 kV
eff
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
4
4
N
) -25 C ... +60 C -25 C ... +60 C
S CAGE CLAMP
S
Cross sections solid: 0.08 mm ... 2.5 mm / AWG 28 ... 12
fine-stranded: 0.34 mm ... 2.5 mm / AWG 22 ... 12
solid: 0.08 mm ... 2.5 mm / AWG 28 ... 12
Approvals VDE 0110 / EN 60664; VDE 0435 / EN 61810-1; r VDE 0110 / EN 60664; VDE 0435 / EN 61810-1; r
(857-358: r pending)
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
857-304
<_________ 94 mm/3.68 in _________>
____________
857-354
<_________ 94 mm/3.68 in _________>
____________
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
A2
A1
1
1
51
8
(gold contacts)
V
N
24 V, 110 V, 220 V DC
(gold contacts)
V
N
24 V, 115 V, 230 V AC/DC
these values should not be exceeded. Higher
switching power leads to evaporation of the gold layer.
The resulting deposits in the enclosure may
cause sparkovers between the coil and the contact.
The values in brackets are valid
if the gold layer is damaged.
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
JUMPFLEX
relay socket with miniature switching

24 V DC 10 mA 857-314 1 24 V AC/DC 8.5 mA 857-364 1
110 V DC 3.5 mA 857-317 1 115 V AC/DC 4 mA 857-367 1
220 V DC 3.2 mA 857-318 1 230 V AC/DC 3.5 mA 857-368 1
2
+ 5 Au AgSnO
2
+ 5 Au
N
-15 % ... +20 % V
N
-15 % ... +20 % (857-364/857-367)
V
N
-15 % ... +10 % (857-368)
Max. switching voltage 36 V* DC / (250 V AC/DC) (250 V AC/DC)*
Max. continuous current (terminal blocks in a row) 50 mA* / (6 A ) 50 mA* / (6 A )
Max. Switching power (resistive) (1250 VA AC; DC see load limit curve) (1250 VA AC; DC see load limit curve)
Recommended minimum load t 1 V / 1 mA / 50 mW t 1 V / 1 mA / 50 mW
-1
/ 20 s
-1
6 min
-1
/ 20 s
-1
Operating power < 300 mW / < 700 mW < 300 mVA / < 800 mVA
eff
4 kV
eff
eff
1 kV
eff
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
4
4
N
) -25 C ... +60 C -25 C ... +60 C
S CAGE CLAMP
S
solid: 0.08 mm ... 2.5 mm / AWG 28 ... 12
Approvals VDE 0110 / EN 60664; VDE 0435 / EN 61810-1; r VDE 0110 / EN 60664; VDE 0435 / EN 61810-1; r
(857-368: r pending)
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
857-314
<_________ 94 mm/3.68 in _________>
____________
857-364
<_________ 94 mm/3.68 in _________>
____________
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
A2
A1
S
1
52
JUMPFLEX
Relay
With 2 relays, with 1 make contact (1 a)
V
N
24 V AC/DC
and contacts.
Description V
N
I
N
Item No.
Pack.
Unit
JUMPFLEX
Relais,
for DIN 35 rail
AC/DC 24 V 10 mA 857-1330 1
Technical Data Accessories see pages 68 ... 71
2
N
-15 % ... +20 %
Max. switching voltage 250 V AC
Max. continuous current (terminal blocks in a row) 4 A
Max. Switching power (resistive) AC 1000 VA; DC see load limit curve
Recommended minimum load t 100 mA / 12 V AC/DC
-1
/ 20 s
-1
Operating power < 300 mW / < 700 mW
Dielectric strength contact-coil 2.5 kV
eff
IEC 60664-1
250 V / 4 kV / 3
6
4
N
) -25 C ... +60 C
S
Approvals VDE 0110 / EN 60664; VDE 0435 / EN 61810-1
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
A3
A4
23
24
A1
A2
13
14
1
1
53
1
54
JUMPFLEX
Relay Socket with Solid State Relay

Solid state relay
Input: 24 V DC
Output: 0 V ... 48 V DC / 0.1 A
Solid state relay
Input: 115 V AC/DC
Output: 0 ... 48 V DC / 0.1 A
Description Item No.
Pack.
Unit
Item No.
Pack.
Unit
JUMPFLEX
relay socket with solid state relay, for

DIN 35 rail
857-704 1 857-707 1
Control circuit:
N
) 24VDC 115V AC/DC
Input voltage range (low level) 0 - 10V 0 - 25V
Input voltage range (high level) 18 - 28.8V 100 - 138V
Nominal input current (I
N
) 9 mA 4.2 mA
Load circuit:
Switching voltage 0 V ... 48 V DC 0 V ... 48 V DC
Peak reverse voltage 54 V 54 V
Max. switching current 0.1 A DC 0.1 A DC
Forward voltage at max. switching current < 1VDC < 1VDC
Switch on/switch off time 60s / 800s 15ms / 13ms
Dielectric strength control/switching circuit 2.5 kV 2.5 kV
S CAGE CLAMP
S
solid: 0.08 mm ... 2.5 mm / AWG 28 ... 12
Standards/Specifications EN 61000-6-2 with 859-891 Overvoltage Protection
Module for SSR*, EN 61000-6-4 (* pending)
EN 61000-6-2 with 859-891 Overvoltage Protection
Module for SSR*, EN 61000-6-4, EN 60664-1
(* pending)
Approvals 1*, g*, UL 508
* pending
1, g*, UL 508
* pending
<_________ 94 mm/3.68 in _________>
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
____________
13
N.C.
14
+
R
L
13
14
N.C.
A2
A1
+
R
L
1
1
55
Solid state relay
Input: 230 V AC/DC
Output: 0 V ... 48 V DC / 0.1 A
Pack.
Unit
JUMPFLEX

DIN 35 rail
857-708 1
Control circuit:
N
) 230V AC/DC
Input voltage range (low level) 0 - 30V
Input voltage range (high level) 200 - 253V
N
) 3.25 mA
Load circuit:
Switching voltage 0 V ... 48 V DC
Peak reverse voltage 54 V
Max. switching current 0.1 A DC
Forward voltage at max. switching current < 1VDC
Switch on/switch off time 25ms / 13ms
Dielectric strength control/switching circuit 2.5 kV
S
Standards/Specifications EN 61000-6-2 with 859-891 Overvoltage Protection
Module for SSR*, EN 61000-6-4, EN 60664-1
(* pending)
Approvals 1, g*, UL 508
* pending
<_________ 94 mm/3.68 in _________>
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
____________
13
14
N.C.
A2
A1
+
R
L
S
1
56
JUMPFLEX

Solid state relay
Input: 24 V DC
Output: 24 V ... 240 V AC / 1 A
Solid state relay
Input: 115 V AC/DC
Output: 24 V ... 240 V AC / 1 A
Pack.
Unit
Item No.
Pack.
Unit
JUMPFLEX

DIN 35 rail
857-714 1 857-717 1
Control circuit:
N
) 24VDC 115V AC/DC
N
) 9.2 mA 3.9 mA
Load circuit:
Switching voltage 24 V ... 240 V AC 24 V ... 240 V AC
Max. switching current 1 A AC 1 A AC
Forward voltage at max. switching current < 1 V AC < 1 V AC
S CAGE CLAMP
S
solid: 0.08 mm ... 2.5 mm / AWG 28 ... 12
Standards/Specifications EN 60664-1 EN 60664-1
Approvals 1, UL 508 1, UL 508
<_________ 94 mm/3.68 in _________>
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
____________
13
14
N.C.
+
R
L
A2
A1
13
14
N.C.
+
R
L
1
1
57
Solid state relay
Input: 230 V AC/DC
Output: 24 V ... 240 V AC / 1 A
Pack.
Unit
JUMPFLEX

DIN 35 rail
857-718 1
Control circuit:
N
) 230V AC/DC
N
) 3.2 mA
Load circuit:
Switching voltage 24 V ... 240 V AC
Max. switching current 1 A AC
Forward voltage at max. switching current < 1 V AC
S
Standards/Specifications EN 60664-1
Approvals 1, UL 508
<_________ 94 mm/3.68 in _________>
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
____________
A2
A1
13
14
N.C.
+
R
L
S
1
58
JUMPFLEX

Solid state relay
Input: 24 V DC
Output: 0 V ... 24 V DC / 2 A
Solid state relay
Input: 115 V AC/DC
Output: 0 V ... 24 V DC / 2 A
Pack.
Unit
Item No.
Pack.
Unit
JUMPFLEX

DIN 35 rail
857-724 1 857-727 1
Control circuit:
N
) 24VDC 115V AC/DC
N
) 9.2 mA 3.9 mA
Load circuit:
Switching voltage 0 V ... 24 V DC 0 V ... 24 V DC
Max. switching current 2ADC 2ADC
Forward voltage at max. switching current < 120mV DC < 120mV DC
Switch on/switch off time 0.1ms / 2ms 5ms / 14ms
S CAGE CLAMP
S
solid: 0.08 mm ... 2.5 mm / AWG 28 ... 12
Standards/Specifications EN 61000-6-2*, EN 61000-6-4;
*The operator has to take appropriate measures so as to
meet the requirements of immunity to interference for
electrical and electronic devices (acc. to EN 61000-6-2
and GL) on the output side, such as using the 859-890
Overvoltage Protection Module for SSR.
EN 61000-6-2*, EN 61000-6-4, EN 60664-1;
Approvals 1, g, UL 508 1, g, UL 508
<_________ 94 mm/3.68 in _________>
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
____________
13
14
N.C.
+
R
L
A2
A1
13
14
+
R
L
N.C.
1
1
59
Solid state relay
Input: 230 V AC/DC
Output: 0 V ... 24 V DC / 2 A
Pack.
Unit
JUMPFLEX

DIN 35 rail
857-728 1
Control circuit:
N
) 230V AC/DC
N
) 3.2 mA
Load circuit:
Switching voltage 0 V ... 24 V DC
Max. switching current 2ADC
Forward voltage at max. switching current < 120mV DC
Switch on/switch off time 8ms / 16ms
S
Standards/Specifications EN 61000-6-2*, EN 61000-6-4, EN 60664-1;
Approvals 1, g, UL 508
<_________ 94 mm/3.68 in _________>
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
____________
A2
A1
13
14
N.C.
+
R
L
S
1
60
JUMPFLEX
Optocouplers
Optocoupler
Input: 2 x 24 VDC
Output: 2 x 9 60 VDC / 0.1 A
Optocoupler
Input: 2 x 24 VDC
Output: 2 x 3 30 VDC / 3 A
Pack.
Unit
Item No.
Pack.
Unit
JUMPFLEX
Optocoupler,
for DIN 35 rail
857-1494 1 857-1430 1
Control circuit:
N
) 2 x 24 V DC 2 x 24 V DC
N
-30 % +25 % V
N
-30 % +25 %
Input voltage range (low level) 0 V ... 5 V 0 V ... 5 V
Input voltage range (high level) 16.8 V ... 30 V 16.8 V ... 30 V
Input current range 3 mA ... 7.8 mA 4.25 mA ... 11 mA
N
) 5.6 mA 7.75 mA
Load circuit:
Switching voltage 2 x DC 9 V ... 60 V 2 x DC 3 V ... 30 V
Max. switching current 2 x 0.1 A DC 2 x 3 A DC
Forward voltage at max. switching current < 2 V < 0.2 V
Switch on/switch off time 20 s / 120 s 25 s / 250 s
Max. switching frequency 1.5 kHz 300 Hz
Dielectric strength channel/channel 4 kV 4 kV
S CAGE CLAMP
S
solid: 0.08 mm ... 2.5 mm / AWG 28 ... 12
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
A1
A2
13
14
RL
A3
A4
23
24
RL
A1
A2
13
14
RL
A3
A4
23
24
RL
1
1
61
Optocoupler
Input: 2 x 24 VDC
Output: 2 changeover contacts,
2 x 24 VDC / 0.5 A
Pack.
Unit
JUMPFLEX
Optocoupler,
for DIN 35 rail
857-1432 1
Control circuit:
N
) 24 V DC
N
-30 % +25 %
Input voltage range (low level) 0 V ... 5 V
Input voltage range (high level) 16.8 V ... 30 V
Input current range 5.3 mA ... 6.3 mA
N
) 5.9 mA
Load circuit:
Switching voltage 2 x DC 3 V ... 30 V
Max. switching current 2 x 500 mA
Min. switching current 2 x 0.5 mA
Forward voltage at max. switching current < 1.5 V
Leakage current at nominal voltage 20 A
Switch on/switch off time 25 s / 250 s
Max. switching frequency 1.5 kHz
S
A1
12
11
14
RL
A2
1
22
21
24
RL
1
S
1
62
JUMPFLEX
8-Channel Adapter for System Wiring

8-channel adapter
with 14-pin ribbon cable connector
Input, positive switching
8-channel adapter
Output, positive switching
Pack.
unit
Item No.
Pack.
unit
JUMPFLEX
8-channel adapter for system wiring 857-981 1 857-982 1

Technical Data
Connection type, signal level 14-pin ribbon cable connector
acc. to DIN 41651
14-pin ribbon cable connector
acc. to DIN 41651
Performance level 3 3
Contact resistance d 20 m d 20 m
Current carrying capacity 1 A 1 A
Test voltage 500 V / 50 Hz / 1 min. 500 V / 50 Hz / 1 min.
Voltage supply V
N
24 V DC 24 V DC
Supply voltage range 16.8 V ... 31.2 V 16.8 V ... 31.2 V
Max. total current 3 A 3 A
Operational indication LED, green LED, green
Connection type, supply 231 Series with CAGE CLAMP
231 Series with CAGE CLAMP
1
2
3 +
4
5
6
7
8
9
10
11
12
13
14
Interface
FLK 14
1
2
3 +
4
5
6
7
8
9
10
11
12
13
14
Interface
FLK 14
1
1
63
8-channel adapter
with SUB-D male connector
Input
Pack.
unit
JUMPFLEX
8-channel adapter for system wiring 857-986 1

Technical Data
acc. to DIN 41651
Performance level 2
Contact resistance d 10 m
Current carrying capacity 1 A
Test voltage 500 V / 50 Hz / 1 min.
Voltage supply V
N
24 V DC
Supply voltage range 16.8 V ... 31.2 V
Max. total current 3 A
Operational indication LED, green
Connection type, supply 231 Series with CAGE CLAMP

+ 1
9
Interface
SUB-D
1
64
WAGO Ribbon Cables
The 14-pin cables transmit signals one-to-one from the 14-pole female connector and are
available in 1-, 2- and 3-meter lengths.
Suitable for system wiring when combined with the JUMPFLEX
Interface
Adapter (Item No. 857-981 and 857-982)
The cables provide fast and easy connection of WAGO I/O modules featuring ribbon
cable connectors. The following WAGO I/O modules and adapters are compatible:
750-1500 (16 DO) -- > 857-981 (DO)
750-1502 (8 DO / 8 DI) --> 857-981 (DO) and 857-982 (DI)
The ribbon cables are available in 1-, 2- and 3-meter lengths -- each has one 20-pole or
two 14-pole female connectors on the ends.
Interface
Adapter (Item No. 857-981 and 857-982)
Pack.
Unit
Pack.
Unit
WAGO ribbon cable 14/14, 1m long 706-753/300-100 1 WAGO ribbon cable 20/2x14, 1m long 706-7753/304-100 1
Technical Data Technical Data
Connections 2 x 14-pole female connector
acc. to DIN 41651
Connections 1 x 20-pole female connector /
2 x 14-pole female connector to
DIN 41651 Wire cross-section 0.14 mm
2
LiYY
Color coding acc. to DIN VDE 47100 Wire cross-section 0.14 mm
2
LiYY
Current per channel max. 1 A Color coding acc. to DIN VDE 47100
Operating temperature -25 C ... +70 C Current per channel max. 1 A
Degree of protection IP20 Operating temperature -25 C ... +70 C
Length 1 m (706-753/300-100)
2 m (706-753/300-200)
3 m (706-753/300-300)
Degree of protection IP20
Length 1 m ( 706-7753/304-100)
2 m (706-7753/304-200)
3 m (706-7753/304-300)
14-pole female connector 14-pole female connector
20-pole female connector
1
1
65
WAGO Ribbon Cables
The cables provide fast and easy connection of WAGO I/O modules featuring ribbon
cable connectors. The following WAGO I/O modules and D-sub adapters are
compatible:
750-1500 (16 DO) --> 857-986 (DO)
The ribbon cables are available in 1-, 2- and 3-meter lengths -- each has one 20-pole or
two 15-pole female connectors on the ends.
Interface
Adapter (Item No. 857-986)
Pack.
Unit
WAGO ribbon cable 20/2x15, 1m long 706-7753/306-100 1
Technical Data
Connections 1 x 20-pole female connector to
DIN 41651 / 2 x 15-pole D-sub female
connector to DIN 41652
Wire cross-section 0.14 mm
2
LiYY
Color coding acc. to DIN VDE 47100
Current per channel max. 1 A
Operating temperature -25 C ... +70 C
Length 1 m (706-7753/306-100)
2 m (706-7753/306-200)
3 m (706-7753/306-300)
20-pole female connector
15-pole D-sub female
connector
15-pole D-sub female
connector
1
66
WAGO Ribbon Cables
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
white
brown
green
yellow
grey
pink
blue
red
black
violet
grey/pink
red/blue
white/green
brown/green
white/yellow
yellow/brown
white/grey
grey/brown
white/pink
pink/brown
acc. to DIN VDE 47100
HE 10 20-pole
contact number
Color coding
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
white
brown
green
yellow
grey
pink
blue
red
black
violet
grey/pink
red/blue
white/green
brown/green
white/yellow
yellow/brown
HE 10 16-pole
contact number
Color coding
Pack.
Unit
WAGO ribbon cable, 20-pole/one free
cable end, lenght 2 m
706-100/1300-200 1
Technical Data
Ports 20-pole female connector/one free
cable end
2
LiYY
Length 2 m
Pack.
Unit
706-100/1602-200 1
Technical Data
cable end
2
LiYY
Length 2 m
1
1
67
WAGO Ribbon Cables
1
2
3
4
5
6
7
8
9
10
11
12
13
14
white
brown
green
yellow
grey
pink
blue
red
black
violet
grey/pink
red/blue
white/green
brown/green
HE 10 14-pole
contact number
Color coding
1
2
3
4
5
6
7
8
9
10
white
brown
green
yellow
grey
pink
blue
red
black
violet
HE 10 10-pole
contact number
Color coding
Pack.
Unit
706-100/1303-200 1
Technical Data
cable end
2
LiYY
Length 2 m
Pack.
Unit
706-100/1301-200 1
Technical Data
cable end
2
LiYY
Length 2 m
1
68
Miniature Switching Relay, Series 857
Pluggable miniature switching relays
(gold contacts)
The values in brackets are valid
if the gold layer is damaged.
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
Pluggable miniature switching relays 12 V DC 857-150 20
24 V DC 857-152 20 24 V DC 857-153 20
The 60 V DC replacement relays must be used with
60 V DC, 110 V DC, 220 V DC and 115 V AC/DC,
230 V AC/DC relay modules.
60 V DC 857-155 20 60 V DC 857-157 20
Technical Data
2
AgSnO
2
+ 5 Au
Max. switching voltage 250 V AC/DC 36 V* DC / (250 V AC/DC)
Max. continuous current (terminal blocks in a row) 6 A 50 mA* / (6 A )
Max. Switching power (resistive) 1250 VA AC (1250 VA AC)*
Recommended minimum load t 100 mA / 12 V AC/DC t 1 V / 1 mA / 50 mW
-1
/ 20 s
-1
6 min
-1
/ 20 s
-1
Rated power consumption < 220 mW < 220 mW
Nominal operating mode continuous duty continious duty
eff
4 kV
eff
eff
1 kV
eff
6
6
4
4
N
) -25 C ... +60 C -25 C ... +60 C
Weight 13,5 g 13,5 g
28 mm
1
5

m
m
5 mm
3,8 mm
A1 A2 12 11 14 A1 A2 12 11 14
1
1
69
8
Solid State Relays, 857 Series
Pluggable replacement optocoupler Pluggable replacement optocoupler
Pack.
Unit
Item No.
Pack.
Unit
Item No.
Pack.
Unit
Pluggable optocouplers 857-161 20 857-164 20 857-167 20
Technical Data
Control circuit:
N
) 24 V DC 24 V DC 24 V DC
Input voltage range 18 V ... 30 V DC 16 V ... 30 V DC 18 V ... 30 V DC
N
) 7 mA 7 mA 7 mA
Load circuit:
Switching voltage 0 V ... 24 V DC 0 V ... 48 V DC 24 V ... 240 V AC
Peak reverse voltage 33 V 54 V 600 V
Max. switching current 2 A DC 100 mA DC 1 A AC
Forward voltage at max. switching current < 120 mV DC < 1 V DC < 1 V AC
Dielectric strength control/switching circuit 2.5 kV 2.5 kV 2.5 kV
General Specifications
Ambient operating temperature -20 C ... +60 C -20 C ... +60 C -20 C ... +60 C
Storage temperature -40 C ... +70 C -40 C ... +70 C -40 C ... +70 C
Dimensions (mm) W x H x L 5 x 15 x 28 5 x 15 x 28 5 x 15 x 28
Pack.
Unit
Item No.
Pack.
Unit
Item No.
Pack.
Unit
Pluggable optocouplers 857-162 20 857-165 20 857-168 20
Technical Data
Control circuit:
N
) 60 V DC 60 V DC 60 V DC
Input voltage range 35 V ... 72 V DC 52 V ... 72 V DC 35 V ... 72 V DC
N
) 3 mA 2.8 mA 3.1 mA
Load circuit:
Switching voltage 0 V ... 24 V DC 0 V ... 48 V DC 24 V ... 240 V AC
Peak reverse voltage 33 V 54 V 600 V
Max. switching current 2 A DC 100 mA DC 1 A AC
Forward voltage at max. switching current < 120 mV DC < 1 V DC < 1 V AC
Dielectric strength control/switching circuit 2.5 kV 2.5 kV 2.5 kV
Ambient operating temperature -20 C ... +60 C -20 C ... +60 C -20 C ... +60 C
Storage temperature -40 C ... +70 C -40 C ... +70 C -40 C ... +70 C
Dimensions (mm) W x H x L 5 x 15 x 28 5 x 15 x 28 5 x 15 x 28
1
70
Sockets for Miniature Switching Relay and Optocoupler
Sockets for miniature switching relay and
optocoupler
Pack.
Unit
JUMPFLEX
socket for miniature switching relay

and optocoupler, 24 V AC/DC for DIN 35 rail
857-104 1
JUMPFLEX

857-107 1
JUMPFLEX

857-108 1
Technical Data Accessories see page 52 + 62 ... 63
Status indication LED yellow
S
<_________ 94 mm/3.68 in _________>
<
_
_
_
_
_
_

8
1

m
m
/
3
.
1
8

i
n

_
_
_
_
_
_
>
____________
12 V DC 857-303 857-103 857-150
24 V DC 857-304 857-104 857-152
48 V DC 857-305 857-105 857-154
60 V DC 857-306 857-106 857-155
110 V DC 857-307 857-107 857-155
220 V DC 857-308 857-108 857-155
24 V AC/DC 857-354 857-104 857-152
115 V AC/DC 857-357 857-107 857-155
230 V AC/DC 857-358 857-108 857-155
24 V DC 857-314 857-104 857-153
110 V DC 857-317 857-107 857-157
220 V DC 857-318 857-108 857-157
24 V AC/DC 857-364 857-104 857-153
115 V AC/DC 857-367 857-107 857-157
230 V AC/DC 857-368 857-108 857-157
24 V DC 857-704 857-104 857-164
115 V AC/DC 857-707 857-107 857-165
230 V AC/DC 857-708 857-108 857-165
24 V DC 857-714 857-104 857-167
115 V AC/DC 857-717 857-107 857-168
230 V AC/DC 857-718 857-108 857-168
24 V DC 857-724 857-104 857-161
115 V AC/DC 857-727 857-107 857-162
230 V AC/DC 857-728 857-108 857-162
M
i
n
i
a
t
u
r
e
S
w
i
t
c
h
i
n
g

R
e
l
a
y
s
(
g
o
l
d

c
o
n
t
a
c
t
s
)
M
i
n
i
a
t
u
r
e
S
w
i
t
c
h
i
n
g

R
e
l
a
y
s
S
o
l
i
d

S
t
a
t
e

R
e
l
a
y
s
Input Voltage Item No. Socket Replacement Relays or
Optocouplers
Assignment Socket / Replacement Relay / Replacement Optocoupler
1
1
71
3-way 859-403 200 (8x25)
4-way 859-404 200 (8x25)
5-way 859-405 200 (8x25)
6-way 859-406 100 (4x25)
7-way 859-407 100 (4x25)
8-way 859-408 100 (4x25)
9-way 859-409 100 (4x25)
10-way 859-410 100 (4x25)
red ... /000-005
blue ... /000-006
WMB Multi marking system Marking
WMB Multi marking system plain 793-501 5 cards
Marking 1 ... 10 (10x) 793-502 5 cards
11 ... 20 (10x) 793-503 5 cards
21 ... 30 (10x) 793-504 5 cards
31 ... 40 (10x) 793-505 5 cards
41 ... 50 (10x) 793-506 5 cards
1 ... 50 (2x) 793-566 5 cards
Operating tool Wire connection
Operating tool, with partially insulated shaft, Type 2, blade (3.5 x 0.5) mm 210-720 1
1
72
Sockets with Miniature Switching Relay
Relay with 1 changeover contact
and status indication
(Relay height: 15 mm)
N

12 V, 24 V, 48 V, 60 V, 110 V DC
N

12 V, 24 V, 48 V, 60 V, 110 V DC
Load limit curve for 788-303 to 788-307, 788-506,
788-507 and 788-508
coils and contacts.
Description V
N
I
N
Item No.
Pack.
unit
V
N
I
N
Item No.
Pack.
unit
Relay sockets with pluggable miniature switching
12 V DC 36 mA 788-303 1 12 V DC 36 mA 788-311 1
24 V DC 19.1 mA 788-304 1 24 V DC 19.1 mA 788-312 1
48 V DC 11 mA 788-305 1 48 V DC 11 mA 788-313 1
60 V DC 10.5 mA 788-306 1 60 V DC 10.5 mA 788-314 1
110 V DC 6 mA 788-307 1 110 V DC 6 mA 788-315 1
Contact material AgNi 90/10 AgNi 90/10
N
10 % V
N
10 %
Max. continuous current 16 A 2 x 8 A
Max. make current (resistive) at a 10 % duty cycle 4 s 30 A (AC) 4 s 15 A (AC)
Max. Switching power (resistive) 4 kVA AC, DC see load limit curve 2 x 2 kVA AC, DC see load limit curve
-1
/ 1200 min
-1
6 min
-1
/ 1200 min
-1
Operating power 400 mW typ. 400 mW typ.
Nominal operating mode continious duty continious duty
Dielectric strength open contact 1 kV 1 kV
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
Degree of protection IP20 IP20
S CAGE CLAMP
S
Approvals DIN VDE 0140 part 1, DIN EN 61140; DIN VDE 0160,
EN 50178; degree of protection II; UL 508
DIN VDE 0140 part 1, DIN EN 61140; DIN VDE 0160,
300
200
100
50
40
30
20
10
0.1 0.2 0.5 1 2 5 10 20
Current (A)
resistive load
V
o
l
t
a
g
e

(
V
)
1
1
73
Zubehr siehe Seite 74 ... 77 + 80 ... 81
N

24 V, 115 V, 230 V AC
N

AC 24 V, 115 V, 230 V
Load limit curve for 788-311 to 788-315, 788-512,
788-515 and 788-516
Description V
N
I
N
Item No.
Pack.
unit
V
N
I
N
Item No.
Pack.
unit
24 V AC 34 mA 788-506 1 24 V AC 34 mA 788-512 1
115 V AC 8 mA 788-507 1 115 V AC 8 mA 788-515 1
230 V AC 4.3 mA 788-508 1 230 V AC 3 mA 788-516 1
N
10 % V
N
10 %
-1
/ 1200 min
-1
6 min
-1
/ 1200 min
-1
Operating power 0.75 VA 0.75 VA
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
S CAGE CLAMP
S
EN 50178; degree of protection II; g ; UL 508
EN 50178; degree of protection II; g ; UL 508
ohmsche Last
Schaltstrom (A)
S
c
h
a
l
t
s
p
a
n
n
u
n
g

(
V
)
S
1
74
with gold contacts and and status indication
N
24 V DC
N
24 V DC
Load limit curve for 788-404, 788-607 and 788-608
Description V
N
I
N
Item No.
Pack.
unit
V
N
I
N
Item No.
Pack.
unit
24 V DC 19 mA 788-404 1 24 V DC 19 mA 788-412 1
Contact material AgNi + 5 AU AgNi + 5 AU
N
10 % V
N
10 %
Max. switching voltage 250 V AC / 36 V DC* 250 V AC / 36 V DC*
Max. continuous current 50 mA* 2 x 50 mA*
Pull-in/drop-out time typ. 7 ms / 3 ms 7 ms / 3 ms
Dielectric strength contact-contact 2.5 kV
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
7
7
S CAGE CLAMP
S
EN 50178; degree of protection II
300
200
100
50
40
30
20
10
0.1 0.2 0.5 1 2 5 10 20
Current (A)
resistive load
V
o
l
t
a
g
e

(
V
)
1
1
75
N
115 V, 230 V AC
N
115 V, 230 V AC
Load limit curve for 788-412, 788-615 and 788-616
Description V
N
I
N
Item No.
Pack.
unit
V
N
I
N
Item No.
Pack.
unit
115 V AC 8.2 mA 788-607 1 115 V AC 8.2 mA 788-615 1
230 V AC 5 mA 788-608 1 230 V AC 5 mA 788-616 1
Contact material AgNi + 5 AU AgNi + 5 AU
N
10 % V
N
10 %
Max. switching voltage 250 V AC / 36 V DC* 250 V AC / 36 V DC*
Max. continuous current 50 mA* 2 x 50 mA*
Dielectric strength contact-contact 2.5 kV 2.5 kV
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
7
7
S CAGE CLAMP
S
EN 50178; degree of protection II; g
EN 50178; degree of protection II; g
2-pole
resistive load
2 contacts in serie
1 contact
Current (A)
V
o
l
t
a
g
e

(
V
)
S
1
76
N
24 V DC
N
24 V DC
Load limit curve for 788-324 and 788-528
Description V
N
I
N
Item No.
Pack.
unit
V
N
I
N
Item No.
Pack.
unit
24 V DC 22 mA 788-324 1 24 V DC 22 mA 788-334 1
Contact material AgCdO AgCdO
N
10 % V
N
10 %
-1
/ 1200 min
-1
10 min
-1
/ 1200 min
-1
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
S CAGE CLAMP
S
EN 50178; degree of protection II; UL 508 (max. 40 C)
EN 50178; degree of protection II; UL 508 (max. 40 C)
300
200
100
50
40
30
20
10
20 ms
40 ms
60 ms
12 A
16 A
8 A
0.1 0.2 0.5 1 2 5 10 20
Current (A)
V
o
l
t
a
g
e

(
V
)
resistive load
1
1
77
N
230 V AC
N
230 V AC
Load limit curve for 788-334 and 788-538
Description V
N
I
N
Item No.
Pack.
unit
V
N
I
N
Item No.
Pack.
unit
230 V AC 5.6 mA 788-528 1 230 V AC 5.6 mA 788-538 1
N
10 % V
N
10 %
-1
/ 1200 min
-1
10 min
-1
/ 1200 min
-1
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
S CAGE CLAMP
S
EN 50178; degree of protection II; g ;
UL 508 (max. 40 C)
EN 50178; degree of protection II; g ;
UL 508 (max. 40 C)
300
200
100
50
40
30
20
10
Current (A)
V
o
l
t
a
g
e

(
V
)
0.1 0.2 0.5 1 2 5 10 20
2 contacts in serie
1 contact
resistive load
S
1
78
N
24 V DC
Description V
N
I
N
Item No.
Pack.
unit
24 V DC 19 mA 788-354 1
Contact material Ag alloy
Input voltage range U
N
-15 % ... +20 %
Max. make current (resistive) at a 10 % duty cycle (50 ms) 120 A at 230 V AC
Recommended minimum load > 100 mA / 12 V AC/DC
Max. Switching power (resistive) 4 kVA AC, DC see load limit curve
Operating power 400 mW
Pull-in/drop-out/bounce time typ. 15 ms / 5 ms / -
Nominal operating mode continious duty
Dielectric strength open contact 1 kV
IEC 60664-1
250 V / 4 kV / 3
6
Mechanical life at max. load (resistance) min. 100.000 switching operations
Service life at lamp load see table lamp loads
Type of relay ALZ
S
10 100 1000
100
10
1
DC resistive load
AC resistive load
Switching voltage (V)
S
w
i
t
c
h
i
n
g

c
u
r
r
e
n
t

(
A
)
Type of load Capability Electrical life
Incandescent lamp 2200 W 20.000
Halogen lamp 230 V AC 1400 W 50.000
Halogen trafo 120 VA 20.000
Fluorescent lamp not comp., CB, cos 0,4-0,6 20 x 58 W 25.000
Fluorescent lamp comp., Conv. ballast, C parallel 9 x 58 W 25.000
Fluorescent lamp comp., Conv. ballast, Duo-circuit 600 W 20.000
Fluorescent lamp with electronic ballast 12 x 58 W 25.000
Energy saving lamp 15 W 25 pcs 20.000
Gas discharge lamp 1000 W 20.000
Dulux-Lamp not compensated 800 W 20.000
Dulux-Lamp compensated 500 W 20.000
Max. capacitance at 230 V AC 60 F min. 5.000
1
1
79
Relay with 1 make contact
N
24 V DC
Description V
N
I
N
Item No.
Pack.
unit
24 V DC 21.8 mA 788-355 1
2
N
-15 % ... +20 %
Max. make current (resistive) at a 10 % duty cycle 4 s 25 A (AC)
Peak inrush current 20 ms / 120 A
Max. Switching power (resistive) 4 kVA AC, DC see load limit curve
IEC 60664-1
250 V / 4 kV / 3
6
Service life at lamp load see table lamp loads
Type of relay RP3SL
S
0,1 0,2 0,5 1 2 5 10 20
300
200
100
50
40
30
20
10
resistive load
DC current (A)
D
C

v
o
l
t
a
g
e

(
V
d
c
)
Contact life at dierent lamp loads
Load Switching operations
12 A, 250 V AC, cos = 1 3 x 10
5
TV 8 acc. to UL 508 25 x 10
3
2500 W, 230 V AC Halogen lamp > 10
4
1000 W, 250 V AC Incandesent lamp 2.3 x 10
5
3000 W, 250 V AC Incandesent lamp 3.6 x 10
4
1500 VA, Fluorescent lamp 163 F 10
4
13
14
S
1
80
Safety relay SR2M (2 changeover contacts)
with forced guided contacts and status
indication
N
24 V DC
In accordance with EN 50205, it is only permitted to use
1 make contact / 1 break contact for safety circuits
(11-14 and 22-21 or 12-11 and 21-24)
Description V
N
I
N
Item No.
Pack.
unit
24 V DC 31 mA 788-384 1
Contact material AgNi
N
10 %
Max. make current (resistive) at a 10 % duty cycle 4 s 14 A (AC)
Recommended minimum load > 50 mW
Max. Switching power (resistive) AC 1500 VA; DC see load limit curve
-1
/ 300 min
-1
Pull-in/drop-out time typ. 10 ms / 4 ms
Dielectric strength open contact 1.5 kV
Dielectric strength contact-contact 3 kV
Clearance and creepage distance contact / coil 8 mm
Adjacent contacts 5.5 mm
IEC 60664-1
250 V / 4 kV / 3
6
S
Approvals EN 50205; UL 508
300
200
100
50
40
30
20
10
0.1 0.2 0.5 1 2 5 10 20
Current (A)
V
o
l
t
a
g
e

(
V
)
resistive load
1
1
81
S
1
82
Electrical and mechanical status indication
Manual operation
N
:
24 V DC, 48 V DC, 110 V DC
Manual operation
N
:
24 V DC, 48 V DC, 110 V DC
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
24 V DC 16.7 mA 788-341 1 24 V DC 16.7 mA 788-346 1
48 V DC 8.3 mA 788-342 1 48 V DC 8.3 mA 788-347 1
110 V DC 3.6 mA 788-344 1 110 V DC 3.6 mA 788-349 1
Contact material AgNi AgNi
N
10 % U
N
10 %
Max. Switching power (resistive) 4 kVA AC 2 x 2 kVA AC
Responce time/Drop-out time max. 15 ms / 8 ms 15 ms / 8 ms
IEC 60664-1 250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
S CAGE CLAMP
S
Standards/Specifications DIN VDE 0140 part 1, DIN EN 61140; DIN VDE 0160,
S
w
i
t
c
h
i
n
g

c
u
r
r
e
n
t

(
A
)
2 change over contacts
1 change over contact
A1
+
A2
-
14
11
12
14
11
12
24
21
22
A1
+
A2
-
1
1
83
Manual operation
N
:
24 V AC, 115 V AC, 230 V AC
Manual operation
N
:
24 V AC, 115 V AC, 230 V AC
Similar to illustration Similar to illustration
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
24 V DC 31.6 mA 788-541 1 24 V DC 31.6 mA 788-546 1
115 V AC 6.6 mA 788-543 1 115 V AC 6.6 mA 788-548 1
230 V AC 3.2 mA 788-544 1 230 V AC 3.2 mA 788-549 1
N
10 % U
N
10 %
Max. Switching power (resistive) 4 kVA AC 2 x 2 kVA AC
Operating power 0.75 VA typ. 0.75 VA typ.
Responce time/Drop-out time max. 15 ms / 8 ms 15 ms / 8 ms
IEC 60664-1 250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
S CAGE CLAMP
S
Standards/Specifications DIN VDE 0140 part 1, DIN EN 61140; DIN VDE 0160,
S
w
i
t
c
h
i
n
g

c
u
r
r
e
n
t

(
A
)
A1
A2
14
11
12
A1
A2
14
11
12
24
21
22
S
1
84
Relay Sockets with Solid State Relay
Solid state relay
Input: 24 V DC
Output: 0 V ... 24 V DC / 3.5 A
Solid state relay
Input: 24 V DC
Output: 0 V ... 24 V DC / 5 A
Pack.
Unit
Item No.
Pack.
Unit
Relay socket with solid state relay, for DIN 35 rail 788-700 1 788-701 1
Control circuit:
N
) DC 24 V DC 24 V
Input voltage range DC 18 V ... 30 V DC 15 V ... 30 V
Control current U
N
(20C) 7 mA 10 % 9.3 mA 10 %
Release voltage DC 8 V DC 2.5 V
Control circuit resistance 3.2 k 2.1 k
Load circuit:
Load switching voltage range DC 0 ... 24 V DC 0 ... 30 V
Max. switching current DC 3.5 A DC12/DC13 (DC 5 A)
Min. switching current DC 1 mA
Pull-in time 50 s
Drop-out time 600 s
Switching frequency (max.) 100 Hz at 5 A
Forward voltage at max. switching current < DC 0.1 V DC 0.3 V
IEC 60664-1
250 V / 2.5 kV / 2 250 V / 2.5 kV / 2
Degree of protection IP 20 IP 20
Ambient operating temperature -20 C ... +60C -40 C ... +60C
S CAGE CLAMP
S
13 +
A1
+
A2
-
14 -
13 +
A1
+
A2
-
14 -
1
1
85
Solid state relay
Input: 24 V DC
Output: 24 V ... 240 V AC / 1 A
Solid state relay
Input: 24 V AC/DC
Output: 12 275 VAC / 2 A
Zero voltage switch
Pack.
unit
V
N
I
N
Item No.
Pack.
Unit
Relay socket with solid state relay, for DIN 35 rail 788-720 1 24 V 10 mA 788-721 1
Control circuit:
N
) 24 V DC 24 V AC/DC
Input voltage range 18 V ... 30 V DC 15 30 VAC
Control current U
N
(20C) 7 mA 10 % 10 mA
Release voltage 4 V DC 2.5 V AC/DC
Control circuit resistance 3.2 k 2.1 k
Load circuit:
Max. switching voltage 240 V AC 275 VAC
Load switching voltage range 24 ... 240 V AC 12 275 VAC (50/60 Hz)
Max. switching current 1 A AC 2A AC
Forward voltage at max. switching current < 1 V AC < 1.1 VAC
Dielectric strength control/switching circuit 3.75 kV 4 kV
IEC 60664-1
250 V / 2.5 kV / 2
250 V / 2.5 kV / 2
Degree of protection IP 20 IP20
Ambient operating temperature -20 C ... +60C -20 C ... +60 C
S CAGE CLAMP S
A1
+
A2
-
13
14
14 ( ) Last
A1
A2
13 (L)
S
1
86
Description V
N
Item No.
Pack.
unit
V
N
Item No.
Pack.
unit
Pluggable miniature switching relays 12 V DC 788-150 20 12 V DC 788-152 20
24 V DC 788-154 20 24 V DC 788-156 20
48 V DC 788-158 20 48 V DC 788-160 20
60 V DC 788-162 20 60 V DC 788-164 20
110 V DC 788-166 20 110 V DC 788-168 20
24 V AC 788-170 20 24 V AC 788-172 20
115 V AC 788-174 20 115 V AC 788-176 20
230 V AC 788-178 20 230 V AC 788-180 20
Technical Data
Switching current 16 A 2 x 8 A
Inrush current 30 A 15 A
Switching power 4 kVA 2 kVA
Min. switching current 10 mA 10 mA
Nominal consumption, typ 400 mW 400 mW
Mechanical life AC coil > 10 x 10
6
switching operations > 5 x 10
6
Mechanical life DC coil > 30 x 10
6
6
Weight approx. 13.5 g approx. 13.3 g
Ambient operating temperature AC coil -40 C ... +70 C -40 C ... +70 C
Ambient operating temperature DC coil -40 C ... +85 C -40 C ... +85 C
Flammability acc. to UL 94 V0 V0
Relay height 15 mm
29.0 12.7
1
5
.
7
3
.
8
Pinning 5 mm Pinning 5 mm
1
1
87
1 changeover contact (gold contacts)
2 changeover contact (gold contacts)
Description V
N
Item No.
Pack.
unit
V
N
Item No.
Pack.
unit
115 V AC 788-175 20 115 V AC 788-177 20
230 V AC 788-179 20 230 V AC 788-181 20
Technical Data
Contact material AgNi + 5 m Au AgNi + 5 m Au
Switching current 50 mA* 2 x 50 mA*
Max. switching voltage 36 V* DC 36 V* DC
Switching power min. 50 mW min. 50 mW
Rated power consumption 200 mW DC 200 mW DC
Rated power consumption 0.422 VA AC 0.422 VA AC
7
7
7
7
Weight approx. 11 g approx. 15 g
Relay height 15 mm
29.0 12.7
1
5
.
7
3
.
8
S
1
88
Description V
N
Item No.
Pack.
unit
V
N
Item No.
Pack.
unit
24 V DC 788-184 20 24 V DC 788-185 20
48 V DC 788-186 20 48 V DC 788-187 20
60 V DC 788-188 20 60 V DC 788-189 20
110 V DC 788-190 20 110 V DC 788-191 20
230 V AC 788-192 20 230 V AC 788-193 20
Technical Data
Contact material AgNi
AgSnO (788-192)
AgNi
AgSnO (788-193)
Switching current 16 A 2 x 8 A
Switching power 4 kVA 2 kVA
Min. switching current 100 mA 10 mA
Rated power consumption 500 mW DC 500 mW DC
Rated power consumption 1.2 VA AC 1.2 VA AC
6
6
6
6
Relay height 25 mm
29.0 12.7
2
5
.
5
3
.
3
1
1
89
Sockets for Miniature Switching Relay
Sockets for miniature switching relay
1 changeover contact / 2 changeover contact
Pack.
unit
Socket without relay, for DIN 35 rail
Relay height 15 mm, 1 changeover contact 788-100 1
Relay height 15 mm, 2 changeover contacts 788-102 1
Relay height 25 mm, 1 changeover contact 788-101 1
Relay height 25 mm, 2 changeover contacts 788-103 1
Technical Data
Max. continuous current 16 A / 2 x 8 A
N
) depending on relay; max. 250 V AC
Dielectric strength 5 kV (depending on relay)
Max. Switching power (resistive) 4000 VA AC
IEC 60664-1
250 V / 4 kV / 3
Ambient operating temperature -25 C ... +70 C (depending on relay)
S
1 changeover contact 2 changeover contacts
View on pins
Pinning
S
1
90
Status indication
Description Power consumption at V
N
Item No. Pack. Unit
Status indication 24 V DC (12 V ... 24 V) 2.4 mA 788-120 50 (2x25)
Status indication 110 V DC 1.9 mA 788-122 50 (2x25)
Status indication 24 V AC 2.1 mA 788-123 50 (2x25)
Push-in type jumper bar
788-113 Commoning Push-in type jumper bar
Push-in type jumper bar, I max. 18 A 2-way (module/module) 788-113 200 (8x25)
3-way 788-114 100 (4x25)
4-way 788-115 100 (4x25)
6-way 788-116 100 (4x25)
8-way 788-117 100 (4x25)
Push-in type jumper bars, light gray, insulated,
18 A
2-way (intern) 859-402 200 (8x25)
WMB Multi marking system Marking Group marker carrier
Marking 1 ... 10 (10x) 793-502 5 cards
11 ... 20 (10x) 793-503 5 cards
21 ... 30 (10x) 793-504 5 cards
31 ... 40 (10x) 793-505 5 cards
41 ... 50 (10x) 793-506 5 cards
1 ... 50 (2x) 793-566 5 cards
Group marker carrier 209-112 50 (1x50)
1
1
91
Ferrule
Description Sleeve for mm
2
/ AWG Item No. Pack. Unit
Ferrule, red insulated, 12 mm 2 x 1 mm
2
/ 2 x 18 216-542 500
1
92
Socket with industrial relay
Coil voltage: 24 V DC
4 changeover contacts
Coil voltage: 24 V DC
4 changeover contacts (gold contacts)
* In order to prevent the gold layer from being damaged,
these values shall not be exceeded. Higher switching
Pack.
Unit
Item No.
Pack.
Unit
Relay socket with industrial relay, for DIN 35 rail 858-304 1 858-314 1
Coil
Coil voltage 24 V DC 24 V DC
Rated power 0.9 W 0.9 W
Coil current 36.9 mA 36.9 mA
Operating range 0.8 ... 1.1 x V 0.8 ... 1.1 x V
Holding voltage 50 % of V
N
50 % of V
N
Release voltage 0.1 x V 0.1 x V
Contacts
Contact material AgCe AgCe + 5 m Au
Continuous current 5 A 50 mA*
Inrush current 15 A / 4 s 15 A / 4 s
Max. switching voltage 250 V AC / 30 V DC 30 V DC*
Switching power (max.) AC1 / AC15 1250 VA / 300 VA 1250 VA / 300 VA
1-phase motor load AC3 0.12 kW 0.12 kW
Switching current (max.) DC1 5 A at 30 V DC 5 A at 30 V DC
Min. switching load 12 V / 100 mA 12 V / 100 mA
Switching frequency under load 20 cycles/min. 20 cycles/min.
6
6
Electrical life 1 x 10
5
5
IEC 60664-1
250 V / 2.5 kV / 2 250 V / 2.5 kV / 2
Dielectric strength contact-coil (AC, 1 min) 1.5 kV 1.5 kV
Ambient operating temperature -25 C ... +70 C (V
L
+ 50 C) -25 C ... +70 C (V
L
+ 50 C)
S CAGE CLAMP
S
Cross sections 2 x 0.34 mm ... 2 x 1.5 mm /
1 x 2.5 mm/
AWG 22 ... 16
2 x 0.34 mm ... 2 x 1.5 mm /
1 x 2.5 mm/
AWG 22 ... 16
14
34
24
44
12
32
22
42
11
31
21
41
A1
-
A2
+
14
34
24
44
12
32
22
42
11
31
21
41
A1
-
A2
+
1
1
93
Coil voltage: 230 V AC
Coil voltage: 230 V AC
4 changeover contacts (gold contacts)
* In order to prevent the gold layer from being damaged,
these values shall not be exceeded. Higher switching
Pack.
Unit
Item No.
Pack.
Unit
Relay socket with industrial relay, for DIN 35 rail 858-508 1 858-518 1
Coil
Coil voltage 230 V AC 230 V AC
Rated power 1.2 VA 1.2 VA
N
80 % of V
N
Contacts
Contact material AgCe AgCe + 5 m Au
Continuous current 5 A 50 mA*
Max. switching voltage 250 V AC / 30 V DC 30 V DC*
6
6
5
5
IEC 60664-1
250 V / 2.5 kV / 2 250 V / 2.5 kV / 2
Ambient operating temperature -25 C ... +70 C (V
L
+ 50 C) -25 C ... +70 C (V
L
+ 50 C)
S CAGE CLAMP
S
1 x 2.5 mm/
AWG 22 ... 16
2 x 0.34 mm ... 2 x 1.5 mm /
1 x 2.5 mm/
AWG 22 ... 16
14
34
24
44
12
32
22
42
11
31
21
41
A1
~
A2
~
14
34
24
44
12
32
22
42
11
31
21
41
A1
~
A2
~
S
1
94
Relay Sockets with Industrial Relay
Relay sockets with industrial relay
Coil voltage:
24 VDC, 110 VDC, 220 VDC
Description V
N
I
N
Item No.
Pack.
Unit
Relay socket with industrial relay,
for DIN 35 rail
24 VDC 31.5 mA 858-390 1
110 VDC 7.7 mA 858-392 1
220 VDC 4.3 mA 858-391 1
Coil
N
-10 % ... +30 %
Contacts
Contact material AgNi 90/10
Max. continuous current 4 x 6 A
Max. make current (resistive) at a 10 % duty cycle 12 A / 20 ms
Max. switching voltage 240 VAC
Max. Switching power (resistive) 4 AC x 1500 VA, DC see load curve
Recommended minimum load 12 V / 10 mA
6
General specifications:
Nominal voltage acc. to IEC 60664-1 250 V / 2.5 kV / 2
eff
Surge capacity open contact 1.2 kV
eff
Dielectric strength contact-contact (AC, 1 min.) 2 kV
eff
N
) -40 C ... +70 C
S
1 x 2,5 mm
AWG 22 ... 16
Standards/Specifications EN 61810-1, EN 60664-1
(OT = On-time)
14
34
24
44
12
32
22
42
11
31
21
41
A1
+
A2
-
1
1
95
Relay Sockets with Industrial Relay
Relay sockets with industrial relay
Coil voltage:
24 VDC, 48 VDC, 110 VDC, 220 VDC
Relay socket with industrial relay
Coil voltage:
AC 230 V
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Relay socket with industrial relay,
for DIN 35 rail
24 VDC 37.5 mA 858-324 1 230 VAC 11 mA 858-528 8
48 VDC 18.5 mA 858-325 8
110 VDC 8.1 mA 858-327 8
220 VDC 4.1 mA 858-328 8
Coil
N
-20 % ... +10 % U
N
-20 % ... +10 %
Contacts
Max. continuous current 2 x 12 A 2 x 12 A
Max. make current (resistive) at a 10 % duty cycle 24 A / 4 s 24 A / 4 s
Max. switching voltage 250 VAC 250 VAC
Max. Switching power (resistive) 2 AC x 3000 VA, DC see load curve 2 AC x 3000 VA, DC see load curve
Recommended minimum load 5 V / 5 mA / 0.3 W 5 V / 5 mA / 0.3 W
Pull-in/drop-out/bounce time typ. 13 ms / 3 ms 10 ms / 8 ms
7
7
Nominal voltage acc. to IEC 60664-1 250 V / 4 kV / 2 250 V / 4 kV / 2
eff
2.5 kV
eff
Surge capacity open contact 1.5 kV
eff
1.5 kV
eff
Dielectric strength contact-contact (AC, 1 min.) 2.5 kV
eff
2.5 kV
eff
N
) -40 C ... +70 C -40 C ... +55 C
31 x 73 x 97
S CAGE CLAMP
S
1 x 2.5 mm/
AWG 22 ... 16
2 x 0.34 mm ... 2 x 1.5 mm /
1 x 2.5 mm/
AWG 22 ... 16
Standards/Specifications EN 61810-1, EN 60664-1 EN 61810-1, EN 60664-1
(OT = On-time)
24
14
22
12
21
11
A1
+
A2
-
24
14
22
12
21
11
A1
A2
S
1
96
Pluggable industrial relays, 4 changeover
contacts with integrated LED and recovery
diode and manual operation
Pluggable industrial relays, 4 changeover
contacts with integrated LED and manual
operation
* In order to prevent the gold layerfrom being
damaged these values should not be exceeded.
Higher switching power leads to evaporation of the
gold layer. The resulting deposits in the endosure may
cause sparkover between the coil and the contact.
Description V
N
Item No.
Pack.
unit
V
N
Item No.
Pack.
unit
Pluggable industrial relay 24 V DC 858-150 1 240 V AC 858-151 1
24 V DC* 858-152 1 240 V AC* 858-153 1
Technical Data
Coil
Coil voltage 24 V DC 240 V AC
Rated power 0.9 W 1.2 VA
N
80 % of V
N
Contacts
Contact material AgCe, AgCe + 5 m Au*AgCe, AgCe + 5 m Au* AgCe, AgCe + 5 m Au*
Continuous current 5 A * 5 A *
Max. switching voltage 250 V AC / 30 V DC 250 V AC / 30 V DC
6
6
5
5
IEC 60664-1
250 V / 2 kV / 2 250 V / 2 kV / 2
Ambient operating temperature -25C ... +70C -25C ... +70C
Mounting distance in a row 6 mm 6 mm
28 max 21,5 max
3
5

m
a
x
5
,8
13.2
4.4
6
.4
1
2
.7
1
6
.8
6
.3
1 2 3 4
5 6 7 8
9 10 11 12
13 14
13.2
4.4
6
.4
1
2
.7
1
6
.8
6
.3
1 2 3 4
5 6 7 8
9 10 11 12
13 14
1
1
97
Socket for industrial relays 2 and 4
changeover contacts
coils and contacts.
Pack.
Unit
Relay socket for industrial relays, for DIN 35 rail 858-100 1
Technical Data
N
) depending on Relay; max. 250 V AC
Max. continuous current 4 x 8 A (4 changeover contacts);
2 x 12 A (2 changeover contacts)
Dielectric strength 4 kV (depending on relay)
IEC 60664-1
250 V / 4 kV / 3
Degree of protection IP 20
Ambient operating temperature -25 C ... +70 C (depending on relay)
S
1 x 2.5 mm/
AWG 22 ... 16
Approvals IEC60664 / IEC60664A / DIN VDE0110
Degree of pollution 2
Overvoltage category 2
41
31
21
11
44
34
24
14
42
32
22
12
A1
A2
1
98
Holding bracket
Description Item No. Pack. unit
Holding bracket for industrial relays (height 33.5 mm ... 35.5 mm) 858-110 1
Push-in type jumper bar
Push-in type jumper bar 858-402 200
Status indication
Description Power consumption at V
N
Item No. Pack. Unit
Status indication 110 V DC 1.9 mA 788-122 50 (2x25)
NOTE:
Only required when using relays without integrated operating indicator!
Operating tool
1
1
99
1
100
Rail Mounted Relay Modules
Relay with 1 make contact Relay direct
soldered with universal mounting carrier
Relay with 1 break contact Relay direct
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 24 V DC 16 mA 288-364 1 24 V DC 16 mA 288-368 1
24 V AC/DC 16 mA 288-564 1 24 V AC/DC 16 mA 288-568 1
48 V AC/DC 9.1 mA 288-565 1
115 V AC/DC 4.4 mA 288-567 1
Technical Data
Contact material AgNi 0.15 + HV AgNi 0.15 + HV
Max. switching voltage 250 V DC / 250 V AC 250 V DC / 250 V AC
Max. make / break current 4 s 16 A / 8 A 4 s 16 A / 8 A
Max. switching power (resistive) 100 W/ 1500 VA 100 W/ 1500 VA
Pull-in / operating power 240 mW / 500 mW 240 mW / 500 mW
Dielectric strength contact-coil (AC, 1 min) 4 kV 4 kV
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
5
5
Dimensions (mm) L x W x H
incl. mounting carrier and relay
13 x 47 x 85 13 x 47 x 85
(WAGO 236 Series) CAGE CLAMP
(WAGO 236 Series)

Accessories
WMB Multi marking system for mounting carrier see page 408 see page 408
Marker strips for mounting carrier white 709-198 / transparent 709-197 white 709-198 / transparent 709-197
A1
+
A2

14
13
A1
~
14
13
A2
~
A1
+
A2

12
11
A1

~
12
11
A2

~
1
1
101
Relay with 1 changeover contact Relay direct
soldered with connectors
Relay with 1 changeover contact Relay direct
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 24 V AC/DC 16 mA 288-554 1 24 V DC 21.8 mA 288-304 1
24 V AC/DC 21.8 mA 288-504 1
230 V AC 6.1 mA 288-508 1
Technical Data
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
5
5
13 x 52 x 85 20.5 x 48 x 85
(WAGO 236 Series)

Accessories
A2

~
12
11
14
11
A1
~
A1

~
A2

~
A2

~
A1
+
A2

11
14
12
A2

11
14
12
1
102
Relay with 2 changeover contacts Relay direct
with 2 relays, 1 changeover contact each
Relay direct soldered with universal mounting
carrier
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 24 V DC 21.8 mA 288-312 1 24 V AC/DC 21.8 mA 288-758 1
24 V AC/DC 21.8 mA 288-512 1 115 V AC/DC 4.8 mA 288-761 1
230 V AC 4.1 mA 288-762 1
Technical Data
Max. make / break current 4 s 14 A / 8 A 20 A / 8 A
Dielectric strength contact-coil (AC, 1 min) 2.5 kV 4 kV
IEC 60664-1
250 V / 2.5 kV / 3 250 V / 4 kV / 3
6
6
5
5
22.5 x 48 x 85 38.5 x 48 x 85
(WAGO 236 Series)

Accessories
A1
+
A2

14
24
21
11
22
12
A1
~
A2
14
24
21
11
22
12
A2
~
A1

~
12
11
14
12
11
14
A1

~
A2

~
A2

~
A2

~
A2

~
1
1
103
Relay in socket with universal mounting
carrier
Description V
N
I
N
Item No.
Pack.
Unit
Switching relay module 24 V DC 21.8 mA 287-774 1
Technical Data
Contact material AgNi 0.15 + HV
Max. switching voltage 300 V DC / 250 V AC
Max. make / break current 20 A / 8 A
Max. switching power (resistive) 192 W/ 1500 VA
Pull-in / operating power 261 mW / 533 mW
Dielectric strength contact-coil (AC, 1 min) 4 kV
IEC 60664-1
250 V / 4 kV / 3
6
5
63.5 x 58 x 85
(WAGO 236 Series)

Accessories
WMB Multi marking system for mounting carrier see page 408
Marker strips for mounting carrier white 709-198 / transparent 709-197
A1
+
A2
+
A4
+
_
_
12
11
14
22
21
24
42
41
44
1
104
carrier
carrier
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 24 V DC 10.2 mA 287-804 1 24 V DC 21.8 mA 287-824 1
24 V AC/DC 10.2 mA 287-814 1 24 V AC/DC 21.8 mA 287-834 1
Technical Data
Max. make / break current 4 s 30 A / 8 A 20 A / 8 A
IEC 60664-1
250 V / 2.5 kV / 3 250 V / 2.5 kV / 3
6
6
5
5
127 x 38 x 85 127 x 58 x 85
(WAGO 236 Series)

Accessories
A1
+
A2
+
A8
+
N
N
A8
~
A2
~
A1
~
N
N
12
14
11
22
24
21
82
84
81
12
14
11
22
24
21
82
84
81
A1
+
A2
+
A8
+
N
N
12
11
14
22
21
24
82
81
84
12
11
14
22
21
24
82
81
84
A8
~
A2
~
A1
~
N
N
1
1
105
carrier
Description V
N
I
N
Item No.
Pack.
Unit
24 V DC 21.8 mA 287-854 1
Technical Data
N
-15 % ...+20 %
Contact material AgNi 0.15
Max. make / break current 4 s 16 A (AC) / 5 A (24 V DC)
Max. switching power (resistive) 1500 VA AC; DC see load limit curve
Recommended minimum load 100 mA / 10 V AC/DC ( 1 W, 1 VA)
Pull-in / operating power 533 mW
IEC 60664-1
250 V / 2.5 kV / 3
6
5
287 x 58 x 85
(WAGO 236 Series)

Approvals DIN VDE 0140, DIN VDE 0160 and IEC 60255, DIN
VDE 0435 (corresponding parts)
Accessories
300
200
100
50
40
30
20
10
20 ms
40 ms
60 ms
8 A
0.1 0.2 0.5 1 2 5 10 20
Current (A)
V
o
l
t
a
g
e

(
V
)
resistive load
A1
+
A2
+
A16
+
N
N
12
11
14
22
21
24
162
161
164
1
106
Relay with 1 make contact Relay direct
Designed for switching high inrush current
loads i.e. filament lamp loads
with 4 relays, 1 make contact each Relay
direct soldered with universal mounting
carrier Designed for switching high inrush
current loads i.e. filament lamp loads
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Technical Data
N
-15 % ...+20 % V
N
-15 % ...+20 %
2
AgSnO
2
Max. make / break current 4 s 25 A 4 s 25 A
Peak inrush current 20 ms/120 A 20 ms/120 A
Max. switching power (resistive) 4000 VA AC; DC see load limit curve 4000 VA AC; DC see load limit curve
Recommended minimum load > 100 mA / 12 V AC/DC > 100 mA / 12 V AC/DC
Pull-in / operating power 500 mW 500 mW
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
Service life at lamp load see lamp load table see lamp load table
20.5 x 47 x 85 64 x 47 x 85
(WAGO 236 Series)

Approvals DIN VDE 0140 Part 18.01 for AC 250 V; DIN VDE 0160
and IEC 60255; DIN VDE 0435 (corresponding parts); UL
508
DIN VDE 0140 Part 18.01 for AC 250 V; DIN VDE 0160
and IEC 60255; DIN VDE 0435 (corresponding parts); UL
508, g
Accessories
300
200
100
50
40
30
20
10
0,1 0,2 0,5 1 2 5 10 20
8A 16A
12A
Current (A)
resistive load V
o
l
t
a
g
e

(
V
)
Contact life at lamp load
Load Switch. oper.
12 A, AC 250 V, cos = 1 3 x 10
5
TV 8 acc. UL 508 25 x 10
3
2500 W, 230 V AC halogen > 10
4
1000 W, 250 V AC incandescent 2.3 x 10
5
3000 W, 250 V AC incandescent 3.6 x 10
4
1500 VA, uorescent 163 F 10
4
A1
+
A2

14
13
A2

A1
+
A2
+
A4
+
13
14
23
24
43
44 N
N
1
1
107
with 4 relays, 1 make contact each Relay
direct soldered with universal mounting
carrier
Bistable relay with 1 changeover contact
carrier
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Technical Data
N
-15 % ...+20 % V
N
-15 % ...+20 %
Contact material AgCdO AgNi 0.15 + HV
Max. make / break current 1 s 25 A (AC) 4 s 20 A / 8 A
Max. switching power (resistive) 4000 VA AC; DC see load limit curve 192 W / 1750 VA
Pull-in / operating power 500 mW 261 mW / 533 mW
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
5
5
64 x 47 x 85 20.5 x 48 x 85
(WAGO 236 Series)

Approvals DIN VDE 0160 and IEC 60255; DIN VDE 0435
(corresponding parts), g
Accessories
300
200
100
50
40
30
20
10
20 ms
40 ms
60 ms
16 A
0.1 0.2 0.5 1 2 5 10 20
Current (A)
V
o
l
t
a
g
e

(
V
)
resistive load
A1
+
A2
+
A4
+
11
14
21
24
41
44 N
N
A2
+
B1

_
11
14
12
A1
+
1
108
Relay with 2 changeover contacts with forced
operated contacts Relay direct soldered with
universal mounting carrier
Switching relay module with 2 pluggable
safety relays with 3 make contacts and 1
break contact with universal mounting carrier
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Technical Data
Contact material AgNi 10 + 5 m Au AgCdO + 0.2 m Au
Contact type 2 changeover contacts 3 make contacts / 1 break contact
Max. switching voltage 380 V 300 V DC / 230 V AC
Max. make / break current 0.3 A 10 A / 7 A
Max. switching power (resistive) 7 W / 7 VA 120 W / 2000 VA
Recommended minimum load 1 mA / 100 mV AC/DC 300 mA / 12 V
Max. switching rate 5 x / s
Pull-in/drop-out/bounce time typ. 15 ms / 12 ms 23 ms / 20 ms
Dielectric strength contact-coil (AC, 1 min) 4 kV 2.5 kV
IEC 60664-1
250 V / 2.5 kV / 3
Test voltage coil - contact 4 kV (1 min) 2500 V eff
Test voltage contact - contact 1 kV (1 min) 2500 V eff
Test voltage contacts - yoke 2500 V eff
7
7
5
Relay fixing mechanism soldered plastic holden with locking latches (by relay manufacturer)
19 x 38 x 85 57 x 90 x 107
(WAGO 736 Series)

Accessories
14
12
11
24
22
21
A2

A1
+
A2

A2
+
_
12 44 34 24
11 43 33 23
12 44 34 24
11 43 33 23
A1
+
_
1
1
109
If required a breathing hole can be made in
the cover. However be aware that the degree
of waterproof protection will reduce from
IP67 to IP30!
Safety relay type SDS SF 4 with 4 break
contacts and 4 make contacts with 1 relay
with universal mounting carrier
Safety relay type SDS SF 4 with 4 break
contacts and 4 make contacts with 2 relays
with universal mounting carrier
If an outer contact (20) should weld then the forced
operated inner contact (12) driven by the actuator (d)
remains open. The rotating armature (c) remains free to
move. The unaffected contact pairs can operate normally,
(i. e. their function to make or break remains unaffected).
If an inner contact should weld (12) then the movement of
the rotating armature (c) is blocked via the operator (d).
Open contacts of all four contact pairs remain open. This
arrangement corresponds to conventional, forced contact
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
12 V DC 41.7 mA 288-413 1 12 V DC 41.7 mA 288-423 1
24 V AC/DC 20.9 mA 288-414 1 24 V AC/DC 20.9 mA 288-424 1
48 V AC/DC 10.5 mA 288-415 1 48 V AC/DC 10.5 mA 288-425 1
60 V AC/DC 8.4 mA 288-416 1 60 V AC/DC 8.4 mA 288-426 1
230 V AC 9.4 mA 288-418 1 230 V AC 9.4 mA 288-428 1
Technical Data
Contact material Ag Sn O 0.1 m Au Ag Sn O 0.1 m Au
Max. make / break current 20 A / 6 A 20 A / 6 A
Max. switching power (resistive) 150 W/ 1500 VA 150 W / 1500 VA
IEC 60664-1
250 V / 2.5 kV / 3 250 V / 2.5 kV / 3
7
7
5
5
63.5 x 40 x 85 127 x 40 x 85
(WAGO 236 Series)

Relay Approvals SEV approvals, no. D 3.31/192; SUVA approvals, no. 36
62 (delayed operation 5 Amp fuse); TV test no. 945/EL
178/88; UL recognized, file no. E 43149
SEV approvals, no. D 3.31/192; SUVA approvals, no. 36
62 (delayed operation 5 Amp fuse); TV test no. 945/EL
178/88; UL recognized, file no. E 43149
Accessories
1
110
Accessories for Rail Mounted Modules
KAMMERRELAIS

is a registered trademark of
the Siemens AG
Socket for European standard industrial relay,
size 1 with 4 changeover contacts
Socket for KAMMRELAIS
Size I with
Pack.
Unit
Item No.
Pack.
Unit
Relay socket, for AC/DC relays 288-111 1 288-131 1
Relay socket, for DC relays with free-wheeling diode 288-112 1 288-132 1
Relay socket, for DC relays with free-wheeling diode
and LED
288-113 1 288-133 1
Technical Data
Relay enclosure 14-pole 8-pole
Operating voltage (dependent on the relay voltage) max. 250 V AC/DC max. 250 V AC/DC
Nominal current 5 A 5 A
Max. coil current of the LED version 25 mA 25 mA
Dimensions (mm) L x W x H incl. mounting carrier and
universal mounting feet
42.5 x 32 x 62.5 42.5 x 32 x 62.5
(WAGO 236 Series)

Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 12 (THHN, THWN) 0.08 mm ... 2.5 mm / AWG 28 ... 12 (THHN, THWN)
Examples of suitable relays Schrack RA4 and ZG4; Siemens V23 100; SDS HC 4; P+B
KH/KHA; Aromat HC+HQ; OMRON MY; IDES RM/RY
Schrack ZL2; Siemens V23 154; Siemens V 23 162; SDS
K2; P+B R 10; Aromat K
Accessories Item No.
Pack.
Unit
Item No.
Pack.
Unit
Mounting carrier, for screw-fixing or DIN-rail mounting
(with snap-fit type universal mounting feet to be ordered
separately)
288-001 1 288-001 1
Universal mounting foot; snap-fit type; suitable for
DIN 15, 32 and 35 rails (also see page 258)
288-002 10 288-002 10
A2 A2 31 41 34 44 42 32
14 14 11 12 7 8 4 3
+13 10 9 6 5 1 2
A1 11 21 14 24 22 12
22 22 24 24 21 21 A2 A2
5 5 7 7 6 6 4 4
9 9 8 8 10 10 +1 +1
11 11 12 12 14 14 A1 A1
1
1
111
KAMMERRELAIS

is a registered trademark of
the Siemens AG
Socket for KAMMRELAIS
Size II with
Pack.
Unit
Relay socket, for AC/DC relays 288-151 1
Relay socket, for DC relays with free-wheeling diode 288-152 1
Relay socket, for DC relays with free-wheeling diode
and LED
288-153 1
Technical Data
Relay enclosure 14-pole
Operating voltage (dependent on the relay voltage) max. 250 V AC/DC
Nominal current 5 A
Max. coil current of the LED version 25 mA
42.5 x 32 x 62.5
(WAGO 236 Series)

Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 12 (THHN, THWN)
Examples of suitable relays Schrack ZL4; Siemens V23 154; Siemens V 23 162; SDS
K4; P+B R 10; Aromat K
Pack.
Unit
separately)
288-001 1
Universal mounting foot; snap-fit type; suitable for
DIN 15, 32 and 35 rails (also see page 258)
288-002 10
A2 A2 31 12 14 22 24 41
1 1 12 5 7 8 10 15
+4 +4 6 11 13 14 16 9
A1 A1 11 32 34 42 44 21
1
112
Pluggable Modules - Relays
Relay with 1 make contact
Module width 10 mm / 0.394 in
Relay with 1 break contact
WSB marker cards
Marking K; Item No.: 209-782
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, 13, 14; Item No.: 209-952
Marking A1, A2, 11, 12; Item No.: 209-953
5 cards, each containing 10 strips with 10 markers
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
48 V DC 8.6 mA 286-365 1 48 V DC 11.1 mA 286-369 1
60 V DC 7.3 mA 286-366 1 60 V DC 10.7 mA 286-370 1
24 V AC 10.2 mA 286-564 1 24 V AC 18.5 mA 286-568 1
115 V AC 10.5 mA 286-566 1
230 V AC 7.3 mA 286-567 1
Contact material Ag Cd O + 1 Au Ag Cd O
Max. Switching power (resistive) 150 W / 1250 VA 150 W / 1250 VA
IEC 60664-1
250 V / 2.5 kV / 3 250 V / 4 kV / 3
7
7
5
5
Pack.
Unit
Item No.
Pack.
Unit
Terminal block for pluggable modules,
with 2-conductor terminal blocks, orange separator 12 mm / 0.472 in 280-618 1 12 mm / 0.472 in 280-618 1
with 4-conductor terminal blocks, marker plate
wire range 0.08 mm ... 2.5 mm / AWG 28 ... 14;
stripped length 8 ... 9 mm / 0.33 in
15 mm / 0.591 in 280-762 1 15 mm / 0.591 in 280-762 1
A1
~
A2
~
13
14
13
14
A1
+
A2

11
12
11
12
A1
~
A2
~
A1
+
A2

1
1
113
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 11, 12, 14, A1, A2, A2;
Item No.: 209-994
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 5/6 V DC 94.3 mA 286-302 1 5/6 V AC/DC 94.3 mA 286-502 1
12 V DC 49.4 mA 286-303 1 12 V AC/DC 49.4 mA 286-503 1
24 V DC 19.4 mA 286-304 1 24 V AC/DC 21.8 mA 286-504 1
48 V DC 11.4 mA 286-305 1 48 V AC/DC 11.4 mA 286-505 1
60 V DC 9.2 mA 286-306 1 60 V AC/DC 9.2 mA 286-506 1
115 V DC 4.8 mA 286-307 1 115 V AC 4.8 mA 286-507 1
220 V DC 6.1 mA 286-308 1 230 V AC 6.1 mA 286-508 1
Max. make / break current 16 A / 8 A (10 % continious duty) 16 A / 8 A (10 % continious duty)
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
6
5
5
Pack.
Unit
Item No.
Pack.
Unit
20 mm/ 0.787 in 280-763 1 20 mm/ 0.787 in 280-763 1
A1
+
A2

A2

14
12
11
A2
~
A2
~
A1
~
14
12
11
1
114
Contact 5 m hard gold plated
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 11, 12, 14, A1, A2, A2;
Item No.: 209-994
Description V
N
I
N
Item No.
Pack.
Unit
48 V DC 11.4 mA 286-395 1
24 V AC/DC 21.8 mA 286-594 1
Contact material AgNi + 5 Au
Max. switching voltage 36 V DC
Max. Switching power (resistive) 25 W / -
Pull-in / operating power 261 mW / 533 mW
IEC 60664-1
250 V / 4 kV / 3
6
5
Pack.
Unit
Item No.
Pack.
Unit
with 2-conductor terminal blocks, orange separator 17 mm / 0.669 in 280-619 1
20 mm/ 0.787 in 280-763 1
14
12
11
A1
~
A2
~
A2
~
A1
+
A2

A2
14
12
11
1
1
115
Relay with 2 changeover contacts
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking 12, A1, A2, 24, 11, 14, 21, 22;
Item No.: 209-995
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 5/6 V DC 82.8 mA 286-310 1 5/6 V AC 174 mA 286-510 1
12 V DC 46.1 mA 286-311 1 12 V AC 89 mA 286-511 1
24 V DC 21.8 mA 286-312 1 24 V AC 47 mA 286-512 1
48 V DC 10.3 mA 286-313 1 48 V AC 23.3 mA 286-513 1
60 V DC 8.8 mA 286-314 1 60 V AC 18.1 mA 286-514 1
115 V DC 4.9 mA 286-315 1 115 V AC 10.5 mA 286-515 1
220 V DC 5 mA 286-316 1 230 V AC 5.5 mA 286-516 1
Contact material Ag Ni 0.15 Ag Ni 0.15
Max. make / break current 0.2 s 30 A / 10 A 0.2 s 30 A / 10 A
Pull-in / operating power 600 mW / 1000 mW 0.8 VA / 1 VA
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
7
7
Mechanical life at max. load (resistance) 2.5 x 10
5
switching operations 2.5 x 10
5
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
A1
+
A2

14
21
22
11
24
12
14
21
22
11
24
12
A1
~
A2
~
1
116
Relay with 1 break and 1 make contact
Relay with 2 make contacts
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A1, A2, A2, 11, 12, 13, 14, 23, 24;
Item No.: 209-693
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 5/6 V DC 47.2 mA 286-318 1 5/6 V DC 47.2 mA 286-326 1
12 V DC 19.9 mA 286-319 1 12 V DC 19.9 mA 286-327 1
24 V DC 7.4 mA 286-320 1 24 V DC 7.4 mA 286-328 1
48 V DC 3.9 mA 286-321 1 48 V DC 3.9 mA 286-329 1
60 V DC 3.9 mA 286-322 1 60 V DC 3.9 mA 286-330 1
220 V DC 3.7 mA 286-324 1 220 V DC 3.7 mA 286-332 1
24 V AC 8.3 mA 286-520 1
Contact material Ag Sn O
2
Ag Sn O
2
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
7
7
5
5
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
14
12
13
11
A1
+
A2

A1
+
A2

14
12
13
11
A1
~
A2
~
A2
~
A1
~
A1
+
A2

14
23
24
13
A2

A1
+
1
1
117
Relay with 2 break contacts and 2 make
contacts
Relay with 1 break contact and 3 make
contacts
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking 12, A1, A2, 23, 24, 11, 13, 14, 21, 22;
Item No.: 209-691
Marking 12, A1, A2, 23, 24, 11, 13, 14, 33, 34;
Item No.: 209-690
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 5/6 V DC 42.3 mA 286-334 1 5/6 V DC 42.3 mA 286-342 1
12 V DC 22.2 mA 286-335 1 12 V DC 22.2 mA 286-343 1
24 V DC 8.5 mA 286-336 1 24 V DC 8.5 mA 286-344 1
48 V DC 5.7 mA 286-337 1 48 V DC 5.7 mA 286-345 1
60 V DC 5.7 mA 286-338 1 60 V DC 5.7 mA 286-346 1
115 V DC 6.6 mA 286-339 1 115 V DC 6.6 mA 286-347 1
24 V AC 11.2 mA 286-536 1 24 V AC 11.2 mA 286-544 1
230 V AC 16.2 mA 286-540 1 115 V AC 10.6 mA 286-547 1
230 V AC 16.2 mA 286-548 1
Contact material AuAg10 over AgNi 15 Au Ag 10 over Ag Ni 15
IEC 60664-1
250 V / 2.5 kV / 3 250 V / 2.5 kV / 3
8
8
5
5
Pack.
Unit
Item No.
Pack.
Unit
Terminal block for pluggable modules, with 2-
conductor terminal blocks, orange separator 27 mm / 1.063 in 280-639 1 27 mm / 1.063 in 280-639 1
30 mm / 1.181 in 280-765 1 30 mm / 1.181 in 280-765 1
23
24
14
21
22
13
12 11
A1
+
A2

A2
~
A1
~
12 11
14
21
22
13
23
24
A1
+
A2

23
24
12 11
14
33
34
13
23
24
12 11
A1
~
A2
~
14
33
34
13
1
118
Relay with 4 make contacts
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking 14, A1, A2, 33, 34, 13, 23, 24, 43, 44;
Item No.: 209-692
Marking A1, A2, 32, 31, 34, 42, 41, 12, 11, 14;
Item No.: 249-656
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 5/6 V DC 42.3 mA 286-350 1 24 V DC 32 mA 286-375 1
12 V DC 22.2 mA 286-351 1 110/120 V AC 9.2 mA 286-578 1
24 V DC 8.5 mA 286-352 1 230 V AC 9.9 mA 286-579 1
48 V DC 5.7 mA 286-353 1
60 V DC 5.7 mA 286-354 1
115 V DC 6.6 mA 286-355 1
24 V AC 11.2 mA 286-552 1
115 V AC 10.6 mA 286-555 1
230 V AC 16.2 mA 286-556 1
Contact material Au Ag 10 over Ag Ni 15 Ag
Max. make / break current 20 A / 5 A 4 A AC / 2 A DC
Max. continuous current 5 A 4 A AC/DC
Pull-in/drop-out/bounce time typ. 10 ms / 5 ms / 2 ms 6 ms / - / 2 ms
IEC 60664-1
250 V / 2.5 kV / 3 250 V / 4 kV / 3
8
7
5
5
Pack.
Unit
Item No.
Pack.
Unit
30 mm / 1.181 in 280-765 1
A1
+
A2

12
11
14
44
22
21
24
42
41
32
31
34
1
1
119
Relay with 1 make contact for higher DC loads
Contacts 5 m Au
* In order to prevent the gold layer from being damaged these
values should not be exceeded. Higher switching power leads to
evaporation of the gold layer. The resulting deposits in the enclosure
may cause sparkovers between the coil and the contact.
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking 12, A1, A2, 24, 11, 14, 21, 22;
Item No.: 209-995
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 24 V DC 20 mA 286-376 1 24 V DC 19.4 mA 286-384 1
Contact material AgNi 0.15 AgCdO + 5 m Au
Max. switching voltage 250 V DC / 250 V AC 36 V DC *
Max. make current (resistive) 4 s 14A
Max. break current 250 V DC/ 110 V DC/ 60 V DC 0.6 A / 1.7 A / 5 A 0.6 A / 1.7 A / 5 A
Recommended minimum load > 12 V / 10 mA AC/DC 10 A / 100 mV
-1
/ 1200 min
-1
Max. continuous current 5 A 50 mA *
Max. Switching power (resistive) 2000 VA
Max. switching power 250 V DC/ 110 V DC/ 60 V DC 150 W / 187 W / 300 W 150 W / 187 W / 300 W
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
6
7
5
Mechanical life at max. load DC (resistive) 2 x 10
5
Mechanical life at max. resistive load AC 3 x 10
5
Approvals DIN VDE 01110/1.89 / DIN VDE 0160 and IEC 60255
/ DIN VDE 0435 (corresponding parts)
Pack.
Unit
Item No.
Pack.
Unit
ire range 0.08 mm ... 2.5 mm / AWG 28 ... 14;
20 mm/ 0.787 in 280-763 1 25 mm / 0.984 in 280-764 1
14
11
11
A2

A1
+
A2

14
21
22
11
24
12
A1
+
A2

1
120
Switching relay with
specified switching treshold:
V
on
180 V 10 %
V
off
150 V 10 %;
Low power (t 7 mW) relay module
Low power drive relay (0.3 mA) through
amplifier Vcc = DC 24 V
1 break and 1 make contact
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 11, 12, 14, A1, A2, A2;
Item No.: 209-994
Marking L+, 1, L-, L-, 11, 12, 13, 14;
Item No.: 209-954
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Switching relay module 230 V AC 4 mA 286-904 1 24 V DC 10 mA 286-906 1
Contact material AgCdO AgCdO, with gold flash
Pull-in / operating power 0.8 VA / 1 VA 150 mW / 240 mW
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
7
7
5
5
Turn-on treshold relay / status indication 180 V 10 % / 122 V 10 %
Turn-off treshold relay / status indication 150 V 10 % / 113 V 10 %
Control voltage output 0 -2 V ... 3 V DC
Control voltage output 1 8 V ... 30 V DC
Pack.
Unit
Item No.
Pack.
Unit
20 mm/ 0.787 in 280-763 1 25 mm / 0.984 in 280-764 1
A1
~
A2
~
A2
~
14
12
11
L
+
L

14
12
13
11
L

1
1
1
121
Latching relay with
1 break contact and 1 make contact
Bistable relay with 1 changeover contact
positive switching, negative switching
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A1, A2, A2, 11, 12, 13, 14, 23, 24;
Item No.: 209-693
Marking A1, A3, A2, 11, 12, 14;
Item No.: 249-607
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
230 V AC 20.9 mA 286-570 1 24 V DC 41.5 mA 286-381 1
Contact material AuAg10 over AgNi 15 AgNi 0.15 + HV
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
8
6
5
5
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 20 mm/ 0.787 in 280-763 1
14
12
13
11
A1

~
A1

~
A2

~
A2

~
14
12
13
11
A1

+
A1

+
A2

A2

A2
+
A3

_
11
14
12
A1
+
A1

_
A2

_
A3
+
14
12
11
1
122
Pluggable Modules - Time Relays
On-delay timing 1 changeover contact
specified time acc. to IEC 255, part 1
On-delay timing 1 changeover contact
specified time acc. to IEC 255, part 1
V
B
= operating voltage; V
St
= control voltage; V
R
= voltage
on relay; t
V
= delay time
On-delay time relay
V
B
on A1+ and A2- applied: relay stays in rest position
delay time t
V
is over: relay switches to working condition
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A1, A2, A2, 12, 11, 11, 14;
Item No.: 209-996
Description Time range Item No.
Pack.
Unit
Time range Item No.
Pack.
Unit
Time relay module 0.1 - 1 s 286-600 1 0.1 - 1 s 286-610 1
1 - 10 s 286-602 1 1 - 10 s 286-612 1
10 - 100 s 286-604 1 10 - 100 s 286-614 1
N
) 24 V DC 230 V AC
Current input at rated voltage (coil 20 C) 12.5 mA 14.4 mA
Contact material AgCdO, with gold flash AgCdO, with gold flash
Operating power 300 mW 3.3 VA
Reset time 100 ms 100 ms
Repeat accuracy 0.5 % 0.5 %
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
7
7
5
5
Dimensions (mm) L x H x W incl. terminal block 20 x 82.5 x 50 20 x 82.5 x 50
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
V
t
v
V
R
V
B
t
A1
+
A2

A1
+
A2

14
11
11
12
A1
~
A1
~
A2
~
A2
~
14
11
11
12
1
1
123
Pulse lengthening, with trigger voltage
V
B
St
R
= voltage
on relay; t
V
= delay time
Pulse lengthening time relay, with auxiliary voltage
V
B
on A1+ and A2- applied: relay stays in rest position; V
St
- pulse on St+:
relay switches to working condition and switches off after t
V
is over.
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A1, St, A2, A2, 12, 11, 11, 14;
Item No.: 209-601
Pack.
Unit
Time relay module 0.1 - 1 s 286-426 1
1 - 10 s 286-427 1
10 - 100 s 286-428 1
N
) 24 V DC
Current input at rated voltage (coil 20 C) 15.0 mA
Contact material AgCdO, with gold flash
Max. make / break current 1 s 15 A / 5 A
Max. Switching power (resistive) 150 W / 2000 VA
Trigger voltage 24 V DC
Reset time 100 ms
Repeat accuracy 0.5 %
IEC 60664-1
250 V / 4 kV / 3
7
5
Dimensions (mm) L x H x W incl. terminal block 20 x 82.5 x 50
Pack.
Unit
25 mm / 0.984 in 280-764 1
V
V
B
V
R
t
v
V
St
t
A1
+
A2

A1
+
14
11
11
12
St
+
1
124
Off-delay timing with trigger voltage
1 changeover contact specified time
acc. to IEC 255, part 1
Off-delay timing with trigger voltage
V
B
St
R
= voltage
on relay; t
V
= delay time
Off-delay time relay with auxiliary voltage
V
B
on A1+ and A2- applied: relay stays in rest position;
V
St
on St+ applied: relay switches to working condition
V
St
interrupted: t
V
is activated; t
V
is over: relay switches off
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A1, St, A2, A2, 12, 11, 11, 14;
Item No.: 209-601
Pack.
Unit
Time range Item No.
Pack.
Unit
1 - 10 s 286-442 1 1 - 10 s 286-448 1
10 - 100 s 286-444 1 10 - 100 s 286-450 1
N
) 24 V DC 230 V AC
Contact material Ag.-Leg., with gold flash Ag.-Leg., with gold flash
Trigger voltage 24 V DC 230 V AC
IEC 60664-1
250 V / 4 kV / 3 250 V / 2.5 kV / 3
7
7
5
5
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
V
V
B
V
R
t
v
V
St
t
V
t
A1
+
A2

A1
+
14
11
11
12
St
+
A1
~
A1
~
A2
~
St
~
14
11
11
12
1
1
125
Pulse time delay relay
V
B
St
R
= voltage
on relay; t
V
= delay time
V
B
on A1+ and A2- applied: relay switches to working condition;
t
V
is over: relay switches off
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A1, A2, A2, 12, 11, 11, 14;
Item No.: 209-996
Pack.
Unit
Time range Item No.
Pack.
Unit
1 - 10 s 286-462 1 1 - 10 s 286-472 1
10 - 100 s 286-464 1 10 - 100 s 286-474 1
N
) 24 V DC 230 V AC
Contact material AgCdO, with gold flash AgCdO, with gold flash
Operating power 910 mW 10 VA
IEC 60664-1
250 V / 4 kV / 3 250 V / 2.5 kV / 3
7
7
5
5
Pack.
Unit
Item No.
Pack.
Unit
ire range 0.08 mm ... 2.5 mm / AWG 28 ... 14;
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
V
V
B
V
R
t
v
t
A1
+
A2

A1
+
A2

14
11
11
12
A1
~
A1
~
A2
~
A2
~
14
11
11
12
1
126
Multirange timing relay, on-delay
4 selectable time ranges,
4 voltage ranges
* with trimming potentiometer; ** DIL switch
Within these time ranges, time adjustment can be mode with the
timming potentiometer.
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking U1, U2, U3, U4, 0V, 12, 11, 11, 14, 14;
Item No.: 209-951
Pack.
Unit
Multirange timing relay module; on-delay, 4 voltage
ranges 230 V AC, 115 V AC, 24 V AC, 24 V DC;
0.3 s ... 3 s, 3 s ... 12 s, 10 s ... 100 s, 100 s ... 800 s
Time ranges selectable with DIL switch
286-616 1
N
) 230 V AC, 115 V AC, 24 V AC, 24 V DC
Current input at rated voltage (coil 20 C) 30.4 mA, 32.6 mA, 20.2 mA, 17.5 mA
Contact material AgNi with gold flash
Reset time 100 ms
Repeat accuracy 0.5 %
IEC 60664-1
250 V / 4 kV / 3
7
5
Pack.
Unit
30 mm / 1.181 in 280-765 1
1 2
220 V ~
110 V ~
24 V ~
24 V
0 V
Time range 03-3s 3-12s 10-100s 100-800s Switch
Switch- OFF ON ON OFF 1
position ON OFF ON OFF 2
time adjustment* time ranges**
o
on
AC
220V
0V
AC
110V
14
11
14
12
11
AC
24V
DC
24V
1
1
127
Multifunction timing relay
4 selectable time ranges,
4 functions
Fine adjustment of time within these time ranges can be made with
the trimming potentiometer.
St+ will only be connected for the function off-delay with auxiliary
voltage.
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A1, St, A2, A2, 12, 11, 11, 14;
Item No.: 209-601
Pack.
Unit
Multifunction timing relay module; on-delay, off-
delay with auxiliary voltage, pulsing in make
position, flashing; input voltage DC 24 V; 0.3 s ... 3 s,
3 s ... 12 s, 10 s ... 100 s, 100 s ... 800 s
Function and timing range are selected
with a DIL switch
286-640 1
N
) 24 V DC
Current input at rated voltage (coil 20 C) 24 mA
Contact material Ag.-Leg., with gold flash
Trigger voltage 24 V DC
Reset time 100 ms
Repeat accuracy 1 %
IEC 60664-1
250 V / 4 kV / 3
Mechanical life 1.5 x 10
7
5
Pack.
Unit
25 mm / 0.984 in 280-764 1
S1 S2 S3 S4 (s)
OFF OFF o-delay OFF OFF 100 - 800
OFF ON pulsing in make pos. OFF ON 0,3 - 3
ON OFF on-delay ON OFF 3 - 12
ON ON ashing ON ON 10 - 100
Switch position / Function Switch position / Time range
OFF
ON
OFF
ON
OFF
ON
OFF
ON
ashing
on-delay
pulsing
o-delay
with auxiliary
voltage
OFF
ON
OFF
ON
OFF
ON
OFF
ON
10 s ... 100 s
3 s ... 12 s
0.3 s ... 3 s
100 s ... 800 s
S
1
,

S
2
S
3
,

S
4
A1
+
A2

A1
+
14
11
11
12
St
+
1
128
Pluggable Modules - Optocouplers
Optocoupler
Input 24 V DC
Output 5 V, 15 V, 24 V DC/500 mA
Negative switching
Optocoupler
Input 24 V DC
Positive switching
WSB marker cards
Marking U; Item No.: 209-789
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 1, 3, 2, A1, A2, A2;
Item No.: 209-685
Description Output Item No.
Pack.
Unit
Output Item No.
Pack.
Unit
Optocoupler module 5 V DC (3 V ... 6 V DC) 286-700 1 5 V DC (3 V ... 6 V DC) 286-750 1
15 V DC (10 V ... 20 V DC) 286-701 1 15 V DC (10 V ... 20 V DC) 286-751 1
24 V DC (20 V ... 30 V DC) 286-702 1 24 V DC (20 V ... 30 V DC 286-752 1
N
) 24 V DC 24 V DC
Input voltage range 12 V ... 30 V DC 12 V ... 30 V DC
Input current range 5 mA ... 20 mA DC 5 mA ... 20 mA DC
Reverse voltage transistor / Triac 80 V DC 80 V DC
Max. permissible continuous current 500 mA 500 mA
Switch on / Switch off time < 5 s / < 15 s < 7 s / < 15 s
Leakage current at nominal voltage 2.5 A 2.5 A
Collector / emitter voltage drop Vce sat d 1.2 V d 1.2 V
Max. output (reverse current) 5 mA ; 10 mA ; 13 mA 5 mA ; 10 mA ; 12 mA
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
20 mm/ 0.787 in 280-763 1 20 mm/ 0.787 in 280-763 1
RL
1
+
3
2
A1
+
A2
A2
RL
1
+
3
2
A1
+
A2
A2
1
1
129
Optocoupler
Input 230 V AC
Negative switching
Optocoupler
Input 230 V AC
Positive switching
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 1, 3, 2, A1, A2, A2;
Item No.: 209-685
Pack.
Unit
Output Item No.
Pack.
Unit
Optocoupler module 5 V DC (3.5 V ... 7 V DC) 286-704 1 5 V DC (3.5 V ... 7 V DC) 286-754 1
15 V DC (10 V ... 20 V DC) 286-706 1 15 V DC (10 V ... 20 V DC) 286-756 1
24 V DC (20 V ... 30 V DC) 286-708 1 24 V DC (20 V ... 30 V DC) 286-758 1
N
) 230 V AC 230 V AC
Input voltage range 40 V ... 250 V AC 40 V ... 250 V AC
Input current range 0.2 mA ... 2.9 mA AC 0.2 mA ... 2.9 mA AC
Current at nominal voltage 2.6 mA AC 2.6 mA AC
Switch on / Switch off time < 10 ms / < 50 ms < 10 ms / < 40 ms
Max. output (reverse current) 5 mA ; 6 mA ; 5 mA 5 mA ; 7.5 mA ; 7.5 mA
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
20 mm/ 0.787 in 280-763 1 20 mm/ 0.787 in 280-763 1
RL
1
+
3
2
A1
~
A2
~
A2
~
RL
1
+
3
2
A1
~
A2
~
A2
~
1
130
Optocoupler
Input 24 V DC
Output 24 V DC/2 A
Negative switching
Optocoupler
Input 24 V DC
Output 24 V DC/5 A
Negative switching
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 1, 3, 2, A1, A2, A2;
Item No.: 209-685
Pack.
Unit
Item No.
Pack.
Unit
Optocoupler module 286-720 1 286-721 1
N
) 24 V DC 24 V DC
Input current range 7.5 mA ... 18 mA DC 7.5 mA ... 18 mA DC
Max. permissible continuous current 2 A 5 A
Switch on / Switch off time < 15 s / < 40 s < 20 s / < 80 s
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
20 mm/ 0.787 in 280-763 1 20 mm/ 0.787 in 280-763 1
RL
1
+
3
2
A1
+
A2
A2
RL
1
+
3
2
A1
+
A2
A2
1
1
131
Optocoupler
Input 5 V DC
Output 24 V DC/500 mA
Positive switching
Optocoupler
Input 24 V DC
Output 24 V DC/4 A
Positive switching
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 1, 3, 2, A1, A2, A2;
Item No.: 209-685
Pack.
Unit
Item No.
Pack.
Unit
Optocoupler module 286-752/002-000 1 286-723 1
N
) 5 V DC 24 V DC
Input voltage range 2 V ... 6.25 V DC 15 V ... 30 V DC
Input current range 3.3 mA ... > 18.5 mA 7.9 mA ... 18 mA DC
Max. permissible continuous current 500 mA 4 A at 6 R
Switch on / Switch off time < 5 s / < 10 s d 15 s / d 25 s
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Approvals IEC 60664 / IEC 60664A / DIN VDE 0110;
pollution degree 2;
Pack.
Unit
Item No.
Pack.
Unit
Terminal block for pluggable modules, w
ith 2-conductor terminal blocks, orange separator 17 mm / 0.669 in 280-619 1 17 mm / 0.669 in 280-619 1
20 mm/ 0.787 in 280-763 1 20 mm/ 0.787 in 280-763 1
RL
1
+
3
2
A1
+
A2
A2
RL
1
+
3
2
A1
+
A2
A2
1
132
Optocoupler
Input 5 V DC 12 V DC 24 V DC
Output 110 V DC/1.6 A
Negative switching
Optocoupler
Input 5 V DC 12 V DC 24 V DC
Output 230 V AC/50 mA ... 1 A
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 1, 3, 2, A1, A2, A2;
Item No.: 209-685
Marking A1, A2, A2, 1, 2, 2, A1, A2, A2;
Item No.: 209-686
Description Input Item No.
Pack.
Unit
Input Item No.
Pack.
Unit
Optocoupler module 5 V DC (4.5 V ... 6,5 V DC) 286-726 1 5 V DC (3.5 V ... 7.5 V DC) 286-732 1
12 V DC (10 V ... 20 V DC) 286-728 1 12 V DC (9 V ... 18 V DC) 286-733 1
24 V DC (15 V ... 30 V DC) 286-730 1 24 V DC (10 V ... 30 V DC) 286-734 1
Input current range 6.5 mA ... 20 mA DC
4 mA ... 12 mA DC
3.5 mA ... 8 mA DC
0.5 mA ... 17 mA DC
4 mA ... 11 mA DC
2 mA ... 8 mA DC
Current at nominal voltage 6.5 mA DC
6.4 mA DC
6.2 mA DC
6 mA DC
Output nominal voltage 110 V DC 230 V AC
Output voltage range 99 V ... 121 V DC 24 V ... 280 V AC
Reverse voltage transistor / Triac 150 V DC 600 V AC
Max. permissible continuous current 1.6 A at 69 R 1 A
Switch on / Switch off time d 20 s / d 0.5 ms 1 half-wave ms / 1 half-wave ms
Max. operating frequency 350 Hz
Leakage current at nominal voltage 3 A 5 mA
Collector / emitter voltage drop Vce sat d 0.5 V
Voltage drop at output < 1.7 V AC
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
20 mm/ 0.787 in 280-763 1 20 mm/ 0.787 in 280-763 1
RL
1
+
3
2
A1
+
A2
A2
~
RL
1
2

2

A1
+
A2

A2

~

~

~

Z
e
r
o

V
o
lt

s
w
i
t
c
h
1
1
133
Optocoupler
Input 10 V ... 30 V AC/DC
Output 24 V DC/1 mA ... 0.5 A
Negative switching
Optocoupler
Input 24 V DC
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 1, 3, 2, A1, A2, A2;
Item No.: 209-685
Marking A1, A2, A2, 1, 2, 2, A1, A2, A2;
Item No.: 209-686
Pack.
Unit
Item No.
Pack.
Unit
N
) 10 V ... 30 V AC/DC 24 V DC
Input voltage range 10 V ... 30 V AC/DC 15 V ... 30 V DC
Input current range 2 mA ... 7 mA AC/DC 7.5 mA ... 18 mA DC
Current at nominal voltage 14 mA
Switch on / Switch off time < 5 ms / < 30 ms 10 s / 50 s
Max. operating frequency 3 kHz
Leakage current at nominal voltage max. 2.5 A 2.5 A
Collector / emitter voltage drop Vce sat d 1 V
Max. output (reverse current) 6.5 mA ... 10 mA DC
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
20 mm/ 0.787 in 280-763 1 15 mm / 0.591 in 280-762 1
RL
1
+
3
2
A1
~
A2
~
A2
~
RL
1
+
2
A1
+
A2

1
134
Optocoupler
Input 24 V DC
Dual channel optocoupler
2 inputs 2 x 24 V DC
2 outputs 2 x 24 V DC/2 x 250 mA
WSB marker cards
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, A2, 1, 2, 2, A1, A2, A2;
Item No.: 209-686
Marking A1+, A1+, A2-, A2-, 1, RL1, Rl2, 2;
Item No.: 209-955
Marking A1+, A1+, A2-, A2-, 1+, 1+, A, 2-;
Item No.: 249-651
Pack.
Unit
Item No.
Pack.
Unit
N
) 24 V DC 24 V DC
Input voltage range 18 V ... 30 V DC 7.5 V ... 30 V DC
Switch on / Switch off time 80 s / 100 s < 60 s / < 120 s
Max. operating frequency 1.5 kHz 1.5 kHz
Collector / emitter voltage drop Vce sat < 2.5 V
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
15 mm / 0.591 in 280-762 1 25 mm / 0.984 in 280-764 1
RL
1
+
2
A1
+
A2

RL
RL
A1
+
A2

A2

A1
+
1
+
2
3
+
4
1
1
135
Optocoupler with 2 inverted outputs
Input 24 V DC
Output 2 x 24 V DC/500 mA
Optocoupler with bridge plug and
programmable outputs
Input 24 V DC
Output 24 V DC,
Short-circuit protected, positive switching
Module width 20 mm/ 0.787 in
286-938:
Optocoupler module with short-circuit protected, positive
switching output.
Two sockets with plug for programming the output.
Independent of the input signal the output can be switched
over to H (high) or L (low) by means of a bridge plug
(supplied with the module).
The short-circuit protected output is equipped with a current
limiter which limits load currents above 800 mA to
200 mA.
The maximum operating time of the current limiter is 60 s.
Status indication:
Input green LED
Output yellow LED
Short circuit red LED
Pack.
Unit
Item No.
Pack.
Unit
N
) 24 V DC 24 V DC
Max. permissible continuous current 500 mA 300 mA (800 mA max. 30 s)
Switch on / Switch off time 4 s / 15 s < 5 s / < 25 s
Max. operating frequency 2.5 kHz 20 kHz at 80 R
Leakage current at nominal voltage 2.5 A < 1 A
Max. output (reverse current) 5.5 mA (Input high, output low);
3 mA (Input low, output low);
11 mA (Output high) programmed
with bridge plug
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
1+
A1
+
1
A2
A1
+
A2
RL1
RL2
2
RL
1
+
A1
+
A2
A1
+
A2
1
+
A
H
L
1
136
Pluggable Modules - S0 Optocouplers
Power optocoupler
for S0 current meter interface
with AC output
Power optocoupler
for S0 current meter interface
with DC output
The optocoupler for the S0 current meter interface sends
counter pulses from the supply lines.
Via this interface the user has the possibility to access data
which is created by pulse generating current meters with a
S0 current meter interface in accordance with DIN 43
864. The user can extract the data without affecting the S0
circuit and use them for their own evaluations, for example,
optimizing energy consumption by reducing peak
demands.
Pack.
Unit
Item No.
Pack.
Unit
S0 interface 286-740 1 286-741 1
Terminal block for pluggable modules, with shunt
resistance
22 mm /
0.866 in wide
286-740/001-000 1 22 mm /
0.866 in wide
286-740/001-000 1
Input current 1-Signal (H) > 10 mA ... < 27 mA > 10 mA ... < 27 mA
Input current 0-Signal (L) < 2 mA < 2 mA
Switch-on treshold > 8.5 mA > 8.5 mA
Switch-off treshold < 7 mA < 7 mA
Transmission frequency <100 Hz
Input wiring reverse protection diode reverse protection diode
Operating voltage range 24 V ... 280 V (50 Hz ... 60 Hz) AC 15 V ... 120 V DC
Peak reverse voltage 600 V AC 200 V DC
Continuous current 2 x 1 A 2 x 750 mA
Surge current t = 20 ms 60 A 3 A
Min. load current 30 mA
Voltage drop at I max < 1.2 V < 1.2 V
Leakage current when turned off < 2 mA
Switch on / Switch off time 10 ms / 10 ms 5 ms / 3 ms
Output circuit RC module / varistor suppressor diode
CAGE CLAMP
Ambient operating temperature -25 C ... +60 C (at 0.4 A continuous current) -25 C ... +60 C (at 200 mA continuous current)
Approvals DIN VDE 0110 DIN VDE 0110
Mounting position any any
1
3
14
A1
+
A2
23
24
1
3
14
A1
+
A2
23
24
1
1
137
Pluggable Modules - S0 Optocouplers
Supply module
for passive S0 current meter interface
This compact module supplies power to passive S0 current
meter interfaces.
Pack.
Unit
S0 supply module 286-742 1
N
) 230 V AC
Frequency 50 Hz
Max. output voltage DC (acc. to DIN 43 864) 27 V
Max. output current (acc. to DIN 43 864) 27 mA
Switch on / Switch off time
Test voltage input / output 2.5 kV eff.
Ambient operating temperature 0 C ... +70 C
Approvals IEC 60664/ IEC 60664A/ DIN VDE 0110;
IEC 60742/ EN 60742/ VDE 0551
Mounting position any
Pack.
Unit
with 4-conductor terminal blocks, orange separator 27 mm /
1.063 in wide
280-629 1
Wire range 0.08 mm ... 2.5 mm / AWG 28 ... 14;
WSB marker card with marking: +/- 209-552 5
Current meter
Power
supply
Passive
S0 interface
Module for
S0 interface
Supply line
(pulse counted)
Power supply
for passiv
S0 interface
L1 N
Supply voltage
Display
PLC
2 electri-
cally isola-
ted outputs
L
N
+
1
138
Pluggable Modules - NAMUR Switching Amplifiers
NAMUR switching amplifier with relay output
(the switching amplifier has got an isolated
output, e.g. for the connection of a PLC)
NAMUR switching amplifier with relay output
(the electronic output VA provides the status of
the NAMUR sensor)
NAMUR switching amplifier for the supply of NAMUR
sensors and the evaluation and amplification of the sensor
signals in accordance with DIN 19234 and DIN 50 227.
A line break or a sensor short circuit are monitored by the
module and indicated via LEDs.
LED 1 yellow: Line break
LED 2 yellow: Short circuit
LED 3 red: Output active
Pack.
Unit
Item No.
Pack.
Unit
NAMUR switching amplifier 286-880 1 286-881 1
Supply voltage V
B
24 V DC ( 10 %) 24 V DC ( 10 %)
Nominal input current 20 mA 20 mA
Input 2-wire NAMUR proximity sensor 2-wire NAMUR proximity sensor
Nominal voltage 8 V DC 8 V DC
Current limitation 8 mA 8 mA
Signal current (1) t 2 mA t 2 mA
Signal current (0) d 1.7 mA d 1.7 mA
Switching delay 10 ms 10 ms
Short circuit monitoring I t 7 mA I t 7 mA
Line break monitoring I d 0.2 mA I d 0.2 mA
Output relay 1 changeover contact transistor
Max. switching voltage 250 V AC / 120 V DC 24 V DC
Switching current 3 A 0.5 A
Output voltage VA 22 V 10 %
Max. breaking capacity (resistive) 750 VA AC; DC see load limit curve
Recommended minimum load 100 mA / 10 V AC/DC ( 1 W, 1VA)
IEC 60664-1
250 V / 4 kV / 3
8
5
Approvals DIN VDE 0160 and IEC 60255, DIN VDE 0435
(corresponding parts) DIN 19234, DIN 50227
DIN VDE 0160 and IEC 60255, DIN VDE 0435
(corresponding parts) DIN 19234, DIN 50227
0 1 2 3 4 5 6
120
100
80
60
40
20
0
Current (A)
V
o
l
t
a
g
e

(
V
)
24 V
12
+

1 2 3
UV
14
11
11
0 V
Sensor
24 V
+
UA
+
0 V
0 V
1 2 3
UV
Sensor
1
1
139
Pluggable Modules - Switches
1-pole changeover
with changeover rocker switch
1-pole changeover
with momentary switch
WSB marker card
Marking S; Item No.: 209-682
Marking 1 ... 10; Item No.: 209-702
Pack.
Unit
Item No.
Pack.
Unit
Switching module 286-895 1 286-896 1
Switching current, resistive 6 A AC 6 A AC
Switching current, inductive 4 A AC 4 A AC
Electrical life t 50.000 switching operations t 50.000 switching operations
Contact gap t 3 mm t 3 mm
Isolation voltage 1250 V 1250 V
Approvals Switch tested acc. to EN 61058-1 Switch tested acc. to EN 61058-1
Pack.
Unit
Item No.
Pack.
Unit
with 2-conductor terminal blocks, orange separator 17 mm / 0.669 in wide 280-619 1 17 mm / 0.669 in wide 280-619 1
20 mm/ 0.787 in wide 280-763 1 20 mm/ 0.787 in wide 280-763 1
1
2
3
1
2
3
1
2
3
1
2
3
1
140
Pluggable Modules - Current Flow Monitoring
AC/DC current flow monitoring module
15 mA DC/35 mA ... 300 mA AC
AC current flow monitoring module
80 mA ... 6 A
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Marking Lin, Lin, Lout, Lout, 24V, UA, UA, 0V;
Item No.: 209-957
Pack.
Unit
Item No.
Pack.
Unit
Current flow monitoring module 286-659 1 286-661 1
Current monitoring range 15 mA DC / 35 mA ... 300 mA AC
Current < 15/35 mA Output 24 V DC
Current > 15/35 mA Output 0 V
80 mA ... 6 A AC
Current < 80 mA Output 24 V DC
Current > 80 mA Output 0 V
Voltage range 10 V ... 250 V AC/DC 5 V ... 250 V AC
Nominal power consumption min / max 45 mW / 900 mW 1 mVA / 2.8 VA
Voltage drop 3 V 13 mV ... 460 mV
Response time 5 ms 40 ms
Operating voltage 24 V DC 24 V DC
Power consumption 61 mA 41 mA
Switching current 50 mA 50 mA
Switching voltage 24 V DC 24 V DC
Switching power 1.2 W 1.2 W
Dielectric strength input / output 2 kV 2 kV
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Status indication Operation: LED = green output LOW, current interruption:
LED = red output HIGH
Operation: LED = green output LOW, current interruption:
LED = red output HIGH
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in wide 280-764 1 25 mm / 0.984 in wide 280-764 1
L
IN
DC/AC
L
OUT
U
I
I
+24V
0V
Output
I
AC
L
OUT
L
IN
+24V
0V
Output
1
1
141
Pluggable Modules - Current Flow Monitoring
DC current flow monitoring module
0.4 A ... 3.5 A 1 make contact
AC current flow monitoring module
0.2 A ... 3 A, adjustable (286-664)
1 A ... 10 A, adjustable (286-665)
1 changeover contact (1 u)
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Marking Lin, Lin, Lout, 11, 14, 14, Lin, Lin, Lout;
Item No.: 249-654
Marking Lin, Lin, Lout, Lout, 24V, 11, 12, 14, 0V;
Item No.: 209-997
Pack.
Unit
Item No.
Pack.
Unit
Current flow monitoring module 286-662 1 286-664 1
286-665 1
Current monitoring range 0.4 A ... 3.5 A DC (-20 C ... +40 C);
0.4 A ... 3 A DC (-20 C ... +60 C);
0.4 A ... 2 A DC (-20 C ... +70 C)
0.2 A ... 3 A AC (286-664)
1 A ... 10 A AC (286-665)
Voltage range 12 V ... 28 V DC
Nominal power consumption min / max 45 mW / 630 mW 9 mVA / 1.3 VA (286-664)
23 mVA / 8.5 VA (286-665)
Switching treshold min. 0.2 A (adjustable) (286-664)
min. 1 A (adjustable) (286-665)
Turn on / off point 0.35 A / 0.07 A
Voltage drop 24 mV ... 210 mV 44 mV ... 430 mV (286-664)
23 mV ... 850 mV (286-665)
Response time 0.5 ms 300 ms (286-664)
200 ms (286-665)
Output 1 make contact 1 changeover contact
Operating voltage 24 V DC
Power consumption 17 mA (286-664)
28 mA (286-665)
Switching current 0.5 A 5 A
Switching voltage 200 V DC 250 V AC
Switching power 10 W 1250 VA
Dielectric strength input / output 1.5 kV 1.5 kV
IEC 60664-1
250 V / 2.5 kV / 2
Status indication Current < switching treshold LED red, Relay switched
Pack.
Unit
Item No.
Pack.
Unit
20 mm/ 0.787 in wide 280-763 1 30 mm / 1.181 in wide 280-765 1
I
I
I
11
14
14
I
I
I
I
+24V
11
12
14
0V
I
U
1
142
Pluggable Modules - Bridge Rectifiers
Bridge with varistor protection for input
voltage 24 V AC/1 A
Bridge with varistor protection for input
voltage 250 V AC/1 A
WSB marker card
Marking V; Item No.: 209-784
Marking 1 ... 10; Item No.: 209-702
Marking +/-; Item No.: 209-652
Pack.
Unit
Item No.
Pack.
Unit
Bridge rectifiers 286-830 1 286-840 1
Input voltage 24 V AC 250 V AC
Current pulse limit 10 A (10 ms) 10 A (10 ms)
Max. charging capacitor 2200 F 500 F
Max. nominal operating voltage input (Varistor) 35 V 250 V
Max. nominal operating voltage output (Varistor) 60 V 300 V
Pack.
Unit
Item No.
Pack.
Unit
20 mm/ 0.787 in wide 280-763 1 20 mm/ 0.787 in wide 280-763 1
~
~
+
~
~
+
1
1
143
Bridge rectifier for input voltage
250 V AC/1 A
Pack.
Unit
Bridge rectifiers 280-804/281-419 1
Input voltage 250 V AC
Nominal current 1 A
Max. charging capacitor 500 F
Pack.
Unit
with 2-conductor terminal blocks, orange separator 12 mm / 0.472 in wide 280-618 1
15 mm / 0.591 in wide 280-762 1
~
~
+

1
144
Pluggable Modules - Fuses
Fuse modules for replaceable microfuses
5 x 20 mm; max. 6.3 A
with blown fuse indication LED green
24 V AC/DC
Fuse modules for replaceable microfuses
5 x 20 mm; max. 6.3 A
with blown fuse indication Neon lamp
230 V AC/DC
WSB marker card
Marking F1 ... F10; Item No.: 209-787
Marking 1 ... 10; Item No.: 209-702
Pack.
Unit
Item No.
Pack.
Unit
Fuse module, with blown fuse indication 286-890 1 286-891 1
Operating voltage 24 V AC/DC 230 V AC/DC
Max. fuse capacity 6.3 A 6.3 A
Operating power 100 mW 100 mW
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Leakage current in case of blown fuse 5 mA 0.5 mA
Test voltage 2.5 kV 2.5 kV
Pack.
Unit
Item No.
Pack.
Unit
+
1
1
145
Pluggable Modules - Diode Gates
Diode gate module
with 3, 5, 7 or 9 diodes 1 N 4007,
common anode
Module width see Item No.
Diode gate module
with 3, 5, 7 or 9 diodes 1 N 4007,
common cathode
Module width see Item No.
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Description Module width Item No.
Pack.
Unit
Module width Item No.
Pack.
Unit
Diode gate module with 3 diodes 10 mm / 0.394 in 286-803 1 10 mm / 0.394 in 286-813 1
with 5 diodes 15 mm / 0.591 in 286-805 1 15 mm / 0.591 in 286-815 1
Rectified current for each diode, resistive 1 A 1 A
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
with 4-conductor terminal blocks, marker plate 15 mm / 0.591 in wide 280-762 1 15 mm / 0.591 in wide 280-762 1
with 4-conductor terminal blocks, marker plate 20 mm / 0.787 in wide 280-763 1 20 mm/ 0.787 in wide 280-763 1
with 4-conductor terminal blocks, marker plate 25 mm / 0.984 in wide 280-764 1 25 mm / 0.984 in wide 280-764 1
1
2
5
6
9
10
1
2
5
6
9
10
1
146
Pluggable Modules - AND Gate and LED Indicator
AND gate module
with 6 inputs
Relay output with 1 make contact
LED indicator module
with 8 LED, common cathode
WSB marker card
Marking D; Item No.: 209-783
Marking 1 ... 10; Item No.: 209-702
Marking +, -, 1, 2, 3, 13, 14, 4, 5, 6;
Item No.: 249-608
Pack.
Unit
Item No.
Pack.
Unit
Gate module 286-826 1 286-822 1
Operating voltage range 24 V ... 27.5 V DC 20 V ... 26 V DC
Gate voltage - input DC 24 V
Power consumption at V
N
max. 34.6 mA 5.1 mA each LED
Relay output make contact
Max. switching voltage 250 V AC / 120 V DC
Dielectric strength input / output 2.5 kV
IEC 60664-1
250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
+
1
2
3
13
14
4
5
6
E1
E6
& A
1

2

3

4

0

5

6

7

8

0

1
1
147
Pluggable Modules - Flip-Flop
Flip-Flop
Pack.
Unit
Item No.
Pack.
Unit
Flip Flop module 286-825 1
Input voltage 24 V DC ( 10 %)
Input current 0.25 mA
Input voltage (High Signal) > 7 V
Input voltage (Low Signal) < 3 V
Pulse frequency 5 kHz
Min. output voltage V
B
- 1.5 V
Max. output current 0.5 A
Operating voltage range 20 V ... 30 V DC
Power consumption 7.5 mA
Reverse voltage transistor 80 V
Test voltage input/output 2.5 kV
IEC 60664-1
250 V / 4 kV / 3
Pack.
Unit
20 mm/ 0.787 in wide 280-763 1
0V
IN
0V
OUT
24V
1
148
Pluggable Modules - Fault Indication
Fault indicator module with reset
Alarm with continuous light with outputs for
visible and audible warning
Auxiliary and fault indication voltage 230 V
AC
Alarm with continuous light with outputs for
visible and audible warning
Extensible to collective fault indicator by
means of diode gates Auxiliary and fault
indication voltage 60 V DC
Accessories for collective fault indication (for 286-684)
Diode gate 286-813 to 286-819
Diode gate 289-111 with common cathode,
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Marking L, N, Quitt, Str, A1, A2, Test, N, 14, 24;
Item No.: 249-606
Pack.
Unit
Item No.
Pack.
Unit
Fault indicator module with reset 286-681 1 286-684 1
Nominal voltage 230 V AC 60 V DC / RW d 6%
Tolerance -10 % ... +5 % 10 %
Power consumption 15 mA 9 mA
Output for visible warning 230 V AC / 0.5 A 60 V DC / 0.5 A
Output for audible warning 230 V AC/2 A electrically isolated make contact
Max. switching current 2 A
Max. switching capacity 500 VA
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
Explanation of signs
Audiable warning
Visible warning
out on
out permanent
light
Fault
Visible warning
Audiable warning
Reset
Test
AC 230 V
L
N N
14
24
Reset
Fault
Test
DC 60 V
DC 60 V
L
N
Test
from
diode gate
Reset
Fault
1
1
149
Indication of original fault with single flashing
light
Output for audible warning
Visible warning by LED Extensible to collective
fault indicator by means of diode gates
Accessories for collective fault indication
Diode gate 286-813 to 286-819
Diode gate 289-111 with common cathode
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Marking A1, A2, Quitt, Str, 12, 11, 11, 14;
Item No.: 249-653
Pack.
Unit
Fault indicator module with reset 286-683 1
Nominal voltage 24 V DC / RW d 6%
Tolerance 10 %
Power consumption 25 mA
Flashing frequency LED (yellow) 1 Hz
Relay output 1 electrically isolated changeover contact
Max. switching current 5 A
Max. switching capacity 120 W / 1250 VA
Dielectric strength contact-coil (AC, 1 min) 2.5 kV
IEC 60664-1
250 V / 4 kV / 3
Pack.
Unit
25 mm / 0.984 in wide 280-764 1
12
11
14
Fault
LED yellow
LED red
Relay
Reset
Explanation of signs
Visible warning
out permanent ashing
light
can be used with diode gate
A1
A2
Reset
Fault
Fault 1

Fault n
14
DC 24 V
11
12 A1+
A2-
from
diode gate
Reset
Fault
1
150
Overview Pluggable Modules Switching Relays
with an extended input voltage and operating temperature range V
N
-30 % ... +25 % Ambient operating temperature -25 C ... +70 C
Switching relay module
Description
Nominal Input
Voltage (V
N
)
Input Voltage Range Max. Switching Voltage Module Width Item No.
Pack.
Unit
Switching relay module, Relay
with 1 changeover contact
24 V DC V
N
-30 % ...+25 % 250 V AC/DC 15 mm / 0.591 in 286-304/004-000 1
N
-30 % ...+25 % 250 V AC/DC 15 mm / 0.591 in 286-307/004-000 1
Relay with 2 changeover
contacts
24 V DC V
N
-30 % ...+25 % 250 V AC / 200 V DC 20 mm / 0.787 in 286-312/004-000 1
Relay with 1 break contact and 1
make contact 24 V DC V
N
-30 % ...+25 % 250 V AC / 200 V DC 20 mm / 0.787 in 286-320/004-000 1
Relay with 2 make contacts 24 V DC V
N
-30 % ...+25 % 250 V AC / 200 V DC 20 mm / 0.787 in 286-328/004-000 1
Relais with 2 make contacts and
2 make contacts 24 V DC V
N
-30 % ...+25 % 250 V AC / 200 V DC 25 mm / 0.984 in 286-336/001-000 1
Relay with 3 make contacts and
1 break contact 24 V DC V
N
-30 % ...+25 % 250 V AC / 200 V DC 25 mm / 0.984 in 286-344/004-000 1
Relay with 4 make contacts 24 V DC V
N
-30 % ...+25 % 250 V AC / 30 V DC 25 mm / 0.984 in 286-352/004-000 1
Relay with 1 make contact 24 V DC V
N
-30 % ...+25 % 250 V AC 10 mm / 0.394 in 286-364/004-000 1
N
-30 % ...+25 % 36 V DC 15 mm / 0.591 in 286-394/004-000 1
Time relay (on-delay timing) with
1 changeover contact 24 V DC V
N
-30 % ...+25 % 250 V AC / 200 V DC 20 mm / 0.787 in 286-604/004-000 1
Multifunction timing relay with1
changeover contact 24 V DC V
N
-30 % ...+25 % 250 V AC / 120 V DC 20 mm / 0.787 in 286-640/004-000 1
Relay with 1 break contact and 1
make contact 24 V DC V
N
-30 % ...+25 % 250 V AC / 250 V DC 15 mm / 0.591 in 286-906/004-000 1
For additional technical data see: www.wago.com
2-conductor terminal block 4-conductor terminal block
with 4-conductor terminal blocks, marker plate 15 mm / 0.591 in wide 280-762 1
Wire range 0.08 mm ... 2.5 mm / AWG 28 ... 14; Stripped lengths 8 ... 9 mm / 0.33 in
1
1
151
WSB Marker Cards
Miniature quick marking card
Marking: K 209-782 5 cards
1 ... 10 (10 x) 209-702 5 cards
A1, A2, 13, 14 209-952 5 cards
A1, A2, 11, 12 209-953 5 cards
11, 12, 14, A1, A2, A2, 11, 12, 14 209-994 5 cards
12, A1, A2, 24, 11, 14, 21, 22 209-995 5 cards
A1, A1, A2, A2, 11, 12, 13, 14, 23, 24 209-693 5 cards
12, A1, A2, 23, 24, 11, 13, 14, 21, 22 209-691 5 cards
12, A1, A2, 23, 24, 11, 13, 14, 33, 34 209-690 5 cards
14, A1, A2, 33, 34, 13, 23, 24, 43, 44 209-692 5 cards
A1, A2, 32, 31, 34, 42, 41, 12, 11, 14, 22, 21, 24, 44 249-656 5 cards
L+, 1, L-, L-, 11, 12, 13, 14 209-954 5 cards
A1, A2, A3, 11, 12, 14 249-607 5 cards
A1, A1, A2, A2, 12, 11, 11, 14 209-996 5 cards
A1, A1, St, A2, A2, 12, 11, 11, 14 209-601 5 cards
U1, U2, U3, U4, 0V, 12, 11, 11, 14, 14 209-951 5 cards
U 209-789 5 cards
A1, A2, A2, 1, 3, 2 209-685 5 cards
A1, A2, A2, 1, 2, 2 209-686 5 cards
A1+, A1+, A2-, A2-, 1, RL1, RL2, 2 209-955 5 cards
A1+, A1+, A2-, A2-, 1+, 1+, A, 2- 249-651 5 cards
+/- 209-552 5 cards
1, 2, 3, 0V, +UB, OUT, ERR., 0V 249-622 5 cards
1, 2, 0V, +UB, OUT, ERR., 0V 249-623 5 cards
Lin, Lin, Lout, Lout, 24V, UA, UA, 0V 209-957 5 cards
Lin, Lin, Lout, 11, 14, 14, Lin, Lin, Lout 249-654 5 cards
Iin, Iin, Iout, Iout, 24V, 11, 12, 14, 0V 209-997 5 cards
S 209-682 5 cards
V 209-784 5 cards
F1 ... F10 209-787 5 cards
D 209-783 5 cards
+, -, 1, 2, 3, 13, 14, 4, 5, 6 249-608 5 cards
L, N, Quitt, Strung, Test, N, 14, 24 249-606 5 cards
A1, A2, Quitt, Strung, 12, 11, 11, 14 249-653 5 cards
Colored marker cards
Marker cards and tags WSB 4 mm/0.157 in (plain) white 209-701 5 cards
Marking software and printer/plotter see Section 8 yellow 209-701/000-002 5 cards
red 209-701/000-005 5 cards
blue 209-701/000-006 5 cards
gray 209-701/000-007 5 cards
orange 209-701/000-012 5 cards
light green 209-701/000-017 5 cards
green 209-701/000-023 5 cards
violet 209-701/000-024 5 cards
1
152
Relay Modules in DIN-Rail Mounted Enclosure
Relay with 1 changeover contact (1 u)
N

24 V DC
Relay with 1 changeover contact (1 u)
N

24 V DC, 230 V AC/DC
Other coil voltages contact factory
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Relay modules in DIN-rail mounted enclosure, for
DIN 35 rail
24 V DC 19 mA 789-304 1 24 V AC/DC 20 mA 789-504 1
230 V AC 4.2 mA 789-508 1
N
-15 % ... +10 % V
N
-15 % ... +10 %
Max. switching voltage 250 V AC/DC 250 V AC/DC
Max. Switching power (resistive) 3000 VA AC, DC see load limit curve 3000 VA AC, DC see load limit curve
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Mechanical life at 1000 W, AC 250 V 30 x 10
6
6
Service life at lamp load 1.2 x 10
3
switching operations 1.2 x 10
3
Dimensions (mm) W x H x L 17.5 x 55 x 90 17.5 x 55 x 90
CAGE CLAMP
Approvals DIN VDE 0160 and IEC 60255;
DIN VDE 0435 (corresp. parts)
DIN VDE 0160 and IEC 60255;
300
200
100
50
40
30
20
10
0.1 0.2 0.5 1 2 5 10 20
Current (A)
resistive load
V
o
l
t
a
g
e

(
V
)
11
12
14
A2

A1
+
A2

A2
~
A1
~
A2
~
11
12
14
1
1
153
Relay with 2 changeover contacts (2 u)
N

24 V, 48 V, 110 V DC
Relay with 2 changeover contacts (2 u)
V
N
24 V AC/DC, 115 V, 230 V AC
Other coil voltages contact factory
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 21 mA 789-312 1 24 V AC/DC 22 mA 789-512 1
48 V DC 13 mA 789-313 1 115 V AC 7.6 mA 789-515 1
110 V DC 6 mA 789-315 1 230 V AC 4.2 mA 789-516 1
N
-15 % ... +10 % V
N
-15 % ... +10 %
Max. switching voltage 250 V AC/DC 250 V AC/DC
Max. make current (resistive) at a 10 % duty cycle 4 s / 15 A 4 s / 15 A
Max. Switching power (resistive) 2000 VA AC, DC see load limit curve 2000 VA AC, DC see load limit curve
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
7
6
switching operation
CAGE CLAMP
300
200
100
50
40
30
20
10
Current (A)
2-pole
resistive load
2 contacts in serie
1 contact
V
o
l
t
a
g
e

(
V
)
0.1 0.2 0.5 1 2 5 10 20
A1
+
A2

A2

11
24
14
12
22
21
A2

~
A1
~
A2

~
11
24
14
12
22
21
1
154
Relay with 4 make contacts (4 a)
N

24 V DC
Relay with 4 make contacts (4 a)
N

12 V, 24 V AC/DC
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 12 mA 789-352 1 12 V AC/DC 21 mA 789-551 1
24 V AC/DC 12 mA 789-552 1
Contact material AuAg10 over AgNi 15 AuAg10 over AgNi 15
N
-15 % ... +10 % V
N
-15 % ... +10 %
Max. switching current 4 A AC / 3 A DC 4 A AC / 3 A DC
Max. Switching power (resistive) 1000 VA / 90 W, resistive see load limit curve 1000 VA / 90 W, resistive see load limit curve
Recommended minimum load > 100 A / 100 mV DC > 100 A / 100 mV DC
Max. switching frequency with load 6 min
-1
6 min
-1
Dielectric strength open contact 0.75 kV 0.75 kV
Dielectric strength contact-contact 1 kV 1 kV
IEC 60664-1
230 V / 2.5 kV / 3 230 V / 2.5 kV / 3
CAGE CLAMP
Approvals DIN VDE 0110 Part1 / 4.97 IEC 60 664-1;
DIN VDE 0435 (corresp. parts), EN 61 810
DIN VDE 0110 Part1 / 4.97 IEC 60 664-1;
10
0.1 1 10
100
1000
C
o
n
t
a
c
t

v
o
l
t
a
g
e

(
V
)
Contact current (A)
DC resistive load AC resistive load
A1
+
A2

A2

14 24 34 44
13 23 33 43
14 24 34 44
13 23 33 43
A2

~
A1

~
A2

~
1
1
155
Relay with 2 break and
2 make contacts (2 ar)
N

24 V DC
Relay with 2 break and
2 make contacts ( 2 ar)
N

12 V, 24 V AC/DC
Note:Inductive loads have to be attenuated by an
and contacts!
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 12 mA 789-336 1 12 V AC/DC 21 mA 789-535 1
24 V AC/DC 12 mA 789-536 1
Contact material AuAg10 over AgNi 15 AuAg10 over AgNi 15
N
-15 % ... +10 % V
N
-15 % ... +10 %
Max. switching current 4 A AC / 3 A DC 4 A AC / 3 A DC
Max. Switching power (resistive) 1000 VA / 90 W, resistive see load limit curve 1000 VA / 90 W, resistive see load limit curve
Recommended minimum load > 100 A / 100 mV DC > 100 A / 100 mV DC
-1
6 min
-1
Dielectric strength open contact 0.75 kV 0.75 kV
IEC 60664-1
230 V / 2.5 kV / 3 230 V / 2.5 kV / 3
CAGE CLAMP
Approvals DIN VDE 0110 Part1 / 4.97 IEC 60 664-1;
DIN VDE 0110 Part1 / 4.97 IEC 60 664-1;
10
0.1 1 10
100
1000
C
o
n
t
a
c
t

v
o
l
t
a
g
e

(
V
)
Contact current (A)
DC resistive load AC resistive load
14 24 12 22
13 23 11 21
A2

A1
+
A2

A1

~
A2

~
A2

~
14 24 12 22
13 23 11 21
1
156
Relay Modules in DIN-Rail Mount Enclosure
Relay with 1 changeover contact (1 u),
manual configuration,
electrical and mechanical activation indicator
Relay with 2 changeover contacts (2 u),
Similiar to picture Similiar to picture
and contacts.
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Relay module in DIN 35-rail mount enclosure 24 VDC 789-1341 24 VDC 789-1346
Coil
N
-10% ... +10 % U
N
-10% ... +10 %
Contacts
Max. make current (resistive) at a 10 % duty cycle 16 A 8 A
Max. Switching power (resistive) 3000 VA AC 2 x 2000 VA AC
Pull-in/drop-out/bounce time typ. 15 ms / 8 ms / - 15 ms / 8 ms / -
6
6
Nominal voltage to EN 60664 250 V / 4 kV / 3 250 V / 4 kV / 3
eff
5 kV
eff
eff
1 kV
eff
Dielectric strength contact-contact (AC, 1 min.) - 1.5 kV
eff
N
) -25 C ... +50 C -25 C ... +50 C
CAGE CLAMP
(OT = On-time)
S
w
i
t
c
h
i
n
g

c
u
r
r
e
n
t

(
A
)
11
12
14
A1
+
A2
A1
+
A2

11
24
14
12
22
21
1
1
157
Relay Modules in DIN-Rail Mount Enclosure
Relay with 2 changeover contacts (2 u),
Similiar to picture
and contacts.
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
Relay module in DIN 35-rail mount enclosure 230 789-1544 230 789-1549
Coil
N
-10% ... +10 % U
N
-10% ... +10 %
Contacts
Max. make current (resistive) at a 10 % duty cycle 16 A 8 A
Max. Switching power (resistive) 3000 VA AC 2 x 2000 VA AC
Pull-in/drop-out/bounce time typ. 15 ms / 8 ms / - 15 ms / 8 ms / -
6
6
Nominal voltage to EN 60664 250 V / 4 kV / 3 250 V / 4 kV / 3
eff
5 kV
eff
eff
1 kV
eff
Dielectric strength contact-contact (AC, 1 min.) - 1.5 kV
eff
N
) -25 C ... +50 C -25 C ... +50 C
CAGE CLAMP
(OT = On-time)
S
w
i
t
c
h
i
n
g

c
u
r
r
e
n
t

(
A
)
11
12
14
A1
~
A2

~
11
24
14
12
22
21
A1
~
A2

~
1
158
Latching relay with 1 make contact (1 a)
N

24 V DC
Latching relay with 1 make contact (1 a)
N

230 V AC
Lamp load: max. load 1500 W
Fluorescent lamp, dual circuit:
max. load 20 x 58 W series compensated
Electronic ballasts: 10 x 58 W
Description V
N
I
N
Item No.
Pack.
Unit
V
N
I
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 42 mA 789-571 1 230 V AC 10 mA 789-570 1
N
-15 % ... +10 % V
N
-15 % ... +10 %
Min. switching current 0.1 A 0.1 A
Max. switching current 50 A (20 ms) 50 A (20 ms)
Max. Switching power (resistive) 4000 VA AC / 300 W DC 4000 VA AC / 300 W DC
Minimum switch-on time 40 ms 40 ms
Minimum break time 180 ms 180 ms
Coil control Impuls Impuls
Fuse protection circuit breaker max. 16 A B-charakteristic circuit breaker max. 16 A B-charakteristic
-1
6 min
-1
Max. switching frequency without load 4 s
-1
4 s
-1
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
5
5
4
4
CAGE CLAMP
DIN VDE 0435 (corresp. parts); DIN VDE 0632
DIN VDE 0435 (corresp. parts); DIN VDE 0632
A1
+
A2

13
14
A1

~
A2

~
13
14
1
1
159
Relay with 1 make contact (1a),
Capability of different lamp loads:
(switching operations acc. to EN 60669)
Note:Inductive loads have to be attenuated by an
and contacts!
Description V
N
Item No.
Pack.
Unit
DIN 35 rail
24 V DC 789-323 1
Contact material Ag-Legierung
N
-15 % ... +20 %
Current input at rated voltage (coil 20 C) 19 mA
Max. make current 120 A at 230 V AC (50 ms)
Max. Switching power (resistive) 4000 VA AC, resistance see load limit curve
Pull-in/drop-out/bounce time typ. 15 ms / 5 ms
Dielectric strength contact-coil 4
Surge capacity open contact 1
IEC 60664-1
250 V / 4 kV / 3
6
Mechanical life at max. lamp load see "Lamp loads" table
Dimensions (mm) W x H x L 17,5 x 55 x 90

Approvals DIN VDE 0140 part 1, DIN EN 61140;
DIN VDE 0160, EN 50178;
degree of protection II
10 100 1000
100
10
1
AC resistive load
Voltage (V)
C
u
r
r
e
n
t

(
A
)
14
13 13
A2
-
A2
-
A1
+
A
A = Automatisk
0 = OFF
1 =
0
1
A3
+
(+24V)
Manuell PA
1
160
Relay with 1 make contact (1 a),
with monitoring contact
Note:
Inductive loads have to be attenuated by an appropriate
protective circuit in order to protect relay coils and
contacts!
Description V
N
Item No.
Pack.
Unit
Relay modules in DIN-rail mounted enclosure,
for DIN 35 rail
24 V DC 789-325 1
N
-15 % ... +20 %
Current input at rated voltage (coil 20 C) 19mA
eff
eff
Nominal voltage acc. to IEC 60664-1 250 V / 4 kV / 3
6
Signaling Isolated monitoring contact
(B1/B2 closed in automatic mode;
max. 1 A, 250 V AC)

Standards/Specifications DIN VDE 0160 EN 50178, degree of protection II
(OT = On-time)
10 100 1000
100
10
1
DC resistive load
AC resistive load
S
w
i
t
c
h
i
n
g

c
u
r
r
e
n
t

(
A
)
0
1
A3
+
n.c.
B2
(+24V)
14
13 13
A2
-
A2
-
A1
+
B1
A
A = Automatic (AUTO)
0 = OFF
1 = Manual ON (MAN)
1
1
161
with switch position monitoring
Note:
Inductive loads have to be attenuated by an appropriate
protective circuit in order to protect relay coils and
contacts!
Description V
N
Item No.
Pack.
Unit
Relay modules in DIN-rail mounted enclosure,
for DIN 35 rail
24 V DC 789-329 1
N
-15 % ... +20 %
Current input at rated voltage (coil 20 C) 19mA
eff
eff
Nominal voltage acc. to IEC 60664-1 250 V / 4 kV / 3
6
Signaling Switch position monitoring
(B1 = automatic, B3 = manual;
max. 1 A, 24 V DC)

Standards/Specifications DIN VDE 0160 EN 50178, degree of protection II
(OT = On-time)
10 100 1000
100
10
1
DC resistive load
AC resistive load
S
w
i
t
c
h
i
n
g

c
u
r
r
e
n
t

(
A
)
A2
-
A2
-
A1
+
B1
A
0
1
A3
+
B3
(+24V)
14
11
12
A = Automatic (AUTO)
0 = OFF
1 = Manual (MAN)
1
162
Push-in type jumper bars
Commoning
Push-in type jumper bars uninsulated, 12-way, to be cut to the required length 789-112 100 (4x25)
Marking pen with fibre tip
Marking 1 ...10 (10 x) 248-502 5 cards
11 ... 20 (10x) 248-503 5 cards
21 ... 30 (10x) 248-504 5 cards
31 ... 40 (10x) 248-505 5 cards
41 ... 50 (10 x) 248-506 5 cards
1 ... 50 (2 x) 248-566 5 cards
K 1 ... K 10 (10 x) 248-450 5 cards
K 11 ... K 20 (10 x) 248-451 5 cards
K 100 (10 x) 248-452 5 cards
U 1 ... U 10 (10 x) 248-453 5 cards
U 11 ... U 20 (10 x) 248-454 5 cards
U 100 (10 x) 248-455 5 cards
1
1
163
789-620
1
164
Current Sensor with Bus Connection in DIN-Rail Mountable Enclosure
Measuring range 0 ... 80 A

100
32767
- 10
90
I/A
- 32768
- 3641
29128
Digital
Digital = Ix364,077
Short description:
Intelligent current sensor for monitoring solar plants or
inverters for DC measurements within a large current measuring range.
Pack.
Unit
Current sensor with bus connection 789-620 1
Pack.
Unit
Accessories for data and auxiliary power supply
RJ-45 interface module 289-965 1
RJ-45 interface module with shield
(screen) clamping saddle 289-966 1
Approvals
Conformity marking 1
Standards/Specifications DIN EN 50178; EN 61000-6-2 ;
EN 61000-6-4
Ambient operating temperature -20C ... +70C
Technical Data
Electrical data:
Measuring range 0 ... 80 A DC
Voltage supply 12 - 34V
Max. current consumption 8 mA at 24 V
Transmission error 0.5 % of upper range value
(at room temperature)
Temperature coefficient 0.01 % /K
Time frame for polling by master < 30 ms
Hot plugging possible
Terminating resistor 150 (can be activated via DIP switch 1)
Status indication Green: power
Red: measured current < -3 A or > 83 A
Mechanical data:
Power cable feed-through 15 mm
Communication:
Interface RS-485
Transmission channels Half duplex 8-bit data, 1 stop bit
Protocols MODBUS over serial line
Connector RJ-45
Addressing 1 ... 32
Max. length of bus line 1200m
Baud rate 19,200 baud
Parity Even
1
1
165
= ON
789-620
Adress DIP Switch
2 3 4 5 6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Terminating resistor DIP Switch 1
-
150 Ohm
Pin Function
1
Ub
2
3 n.c.
4 A (Data+)
5 B (Data-)
6 n.c.
7
GND
8
RJ-45-Connector Pin Assignment:
DIP Switch Adjustability
MODBUS Function Read Holding Registers (0x03) Data Type Measurement
Device Type 0x0000 Char
Firmware 0x0001 Char
Error Code 0x0002 Integer
Measurement 0x0004 Integer
Exception Code 0x0006 Integer
Communication Description:
Error Numbers:
id Description
01 Illegal Function
03 Illegal Data
101 Overow (Current > +83 A)
102 Underow (Current < -3 A)
RS-485 Uart:
half duplex
Communication settings required for
transducer:
Baud rate: 19200 bd
Data bits: 8
Parity: even
Stop bits: 1
NOTICE:
Only set the MODBUS address in the
OFF state.
789-621
1
166
Measuring range: 0 140 A

140
- 10
I/A
- 32768
- 3641
29128
Digital
Digital = I x 208,06
Short description:
Intelligent current sensor for monitoring solar plants or
inverters for DC measurements within a large current measuring range.
Pack.
Unit
Pack.
Unit
Approvals
EN 61000-6-4
Technical Data
Electrical data:
Measuring range 0 - 140A DC
Voltage supply 12 - 34V
Transmission error 0 - 80A: 0.5% of upper range value (at
room temperature);
80 - 140A: 1% of upper range value (at
room temperature)
Temperature coefficient 0.05% /K
(at ambient operating temperature:
-20C ... +60C);
0.1% /K
(at ambient operating temperature:
+60C ... +70C)
Status indication Green: power;
Red: measured current < -3A
or > 143A
Mechanical data:
Communication:
Interface RS-485
Transmission channels Half duplex, 8-bit data, 1 stop bit
Protocols MODBUS RTU Slave over serial line
Connector RJ-45
Addressing 1 ... 32
Max. length of bus line 1200m
Baud rate 19200 baud
Parity Even
1
1
167
789-622
= ON
Adress DIP Switch
2 3 4 5 6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
-
150 Ohm
MODBUS Function Read Holding Registers (0x03)
Address of Measured Value 0x0004
Data Type Measurement Integer
NOTICE:
OFF state.
Pin Function
1
Ub
2
3 n.c.
4 A (Data+)
5 B (Data-)
6 n.c.
7
GND
8
RS-485 Uart:
half duplex
transducer:
Baud rate: 19200 bd
Data bits: 8
Parity: even
Stop bits: 1
789-622
1
168
Measuring range: 0 50 A
eff.
0
50
I/A (AC)
18205
Process Value
Short description:
Intelligent DIN 35-rail mount current sensor
for monitoring AC currents.
Pack.
Unit
Accessories Description Item No.
Pack.
Unit
Approvals
EN 61000-6-4
Technical Data
Electrical data:
Measuring range 0 50 A AC
eff.
Voltage supply 12 34 V
Transmission error typ. 1%, max. 3% of upper range value (at
room temperature)
Status indication Green: Power
Red: Measured current > 55 A
eff.
Mechanical data:
Communication:
Interface RS-485
Transmission channels Half duplex, 8-bit data, 1 stop bit
Protocols MODBUS RTU slave over serial line
Connector RJ-45
Addressing 1 32
Max. length of bus line 1200 m
Baud rate 19200 baud
Parity Even
1
1
169
789-622
= ON
Adress DIP Switch
2 3 4 5 6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
-
150 Ohm
MODBUS Function Read Holding Registers (0x03)
Address of Measured Value 0x0004
Data Type Measurement Integer
NOTICE:
OFF state.
Pin Function
1
Ub
2
3 n.c.
4 A (Data+)
5 B (Data-)
6 n.c.
7
GND
8
RS-485 Uart:
half duplex
transducer:
Baud rate: 19200 bd
Data bits: 8
Parity: even
Stop bits: 1
789-652
1
170
3-Channel Rogowski Signal Conditioner
U2
GND
U1
GND
U3
GND
IN (U)
OUT (I)
POWER
I
L1
I
N
24 V
0 V
I
L2
I
L3
Short description:
The 789-652 Rogowski Signal Conditioner acquires 5500A alternating
currents in a three-phase system.
The magnetic field produced around each conductor is sensed via three
non-contact Rogowski coils and provided as a proportional voltage signal to
the signal conditioner. The 789-652 adjusts the phase of each of the three
voltage signals, converting them into 100mA alternating current signals. These
are then transmitted to the 750-493 3-Phase Power Measurement Module.
The 750-493 3-Phase Power Measurement Module within the WAGO-I/O-
SYSTEM measures electrical data (e.g., voltages, currents, effective power and
energy consumption) in a three-phase supply network. Thus, the user is always
able to determine the load condition (imbalance, capacitive components), to
optimize consumption and protect machines or systems from damage and
breakdowns. Easy installation of Rogowski coils also allows existing systems to
be retrofitted without process interruption.
Pack.
Unit
3-Channel Rogowski Signal Conditioner 789-652 1
Pack.
Unit
Rogowski Coils RT500 0758-0950/
0000-0500
1
3-Phase Power Measurement Module (1 A) 750-493 1
Technical Data
Input:
Input signal 3 x RT500 (500 A)
Sensitivity 10.05 mV
50 Hz sinus
Output:
Output signal 3 x 100 mA AC
Rated output current 100 mA AC (for direct connection to
750-493 Phase Power Measurement
Module)
Overcurrent 750 A (max. 150 mA per output)
Load impedance 5
Technical Data
Supply voltage range 16.8 32 V
max. power consumption 4000 mW
Operational indication LED, green
Phase error < 1
Max. operating frequency 300 Hz (phase accuracy at 50 Hz only)
Linearity 0.1 %
Temperature coefficient 0.1 %/K
Transmission error < 1.1 %
Response threshold 2A
Environmental requirements:
Safety and protection:
Test voltage (input/output/supply) AC 2.5 kV, 50 Hz, 1 Min.
Connection and type of mounting:

Dimensions and weight:
Weight 105 g
Standards and approvals:
r UL 508 (pending)
1
1
171
1
172
4-Channel EnOcean Radio Receivers in DIN-Rail Mount Enclosure
4-channel EnOcean radio receiver
with 4 changeover contacts, 8 A
with 4 make contacts, 16 A
The 4-channel radio receiver in DIN-rail mount enclosure is
used to switch 4 independent electrical devices or loads.
The radio receiver processes telegrams transmitted by
sensors (binary information) using EnOcean radio
technology (PTM + STM modules).
The outputs are switched via relay contacts.
Radio receiver for battery-less and wireless sensors
LED indication of switch status
External antenna for optimum transmission range
(required)
Frequency band 868 MHz
Transmitter-to-receiver assignment via learn mode
Pack.
unit
Item No.
Pack.
unit
4-channel EnOcean radio receiver 789-602 1 789-601 1
Technical Data
Voltage supply 24 V DC 24 V DC
Voltage range -15 % ... + 20 % -15 % ... + 20 %
Current consumption (internal) max. 90 mA max. 90 mA
Number of receive channels 40 (10 per output) 40 (10 per output)
Number of channels 4 (relay outputs) 4 (relay outputs)
Output current (per channel) max. 8 A, AC1 max. 16 A, AC1
Type of load resistive / motor load resistive / lamp load
Switching frequency max. < 5 Hz max. < 5 Hz
Delay time transmitter /output command < 100 ms; 40 ms ... 70 ms typ. < 100 ms; 40 ms ... 70 ms typ.
Switching voltage 230 V AC 230 V AC
Fuse protection Loads: wire breaker, max.16 A Loads: wire breaker, max.16 A
Isolation potential free contacts potential free contacts
Ambient operating temperature 0 C ... +55 C 0 C ... +55 C
Relative air humidity (no condensation) 85 % 85 %
Degree of pollution 2 2
(WAGO 236 Series)

Approvals Vibration and shock resistance acc. to IEC 60068-2-6 and
IEC 60068-2-27
Vibration and shock resistance acc. to IEC 60068-2-6 and
IEC 60068-2-27
Accessories: RF magnetic antenna incl. 3m connecting
cable with SMA connector
758-910 758-910
24V DC
+ -
4-channel radio receiver
K1...K4
K1...K4
...
14 12 11 ... 44 42 41
LRN
Us
EnOcean
Receiver
24V DC
+ -
K1...K4
K1...K4
...
14 13 ... 44 43
LRN
Us
EnOcean
Receiver
1
1
173
Manual Control Modules
Manual control module, digital, 4 outputs Manual control module, analog, 4 outputs
The digital manual control module 789-810 controls the
different outputs 0 ... 3 and indicates their status via green
LEDs and the changeover contact of the power relay.
Depending on both the manual/automatic switch and
watchdog input, the states 0 or 1 are transmitted in an
electrically isolated from to the output via a relay.
The analog manual control module 789-811 controls the
different analog outputs 0 ... 3.
Depending on both the manual/automatic switch and
watchdog input, the voltages set between 0 ... 10 V are
transmitted to the output.
Pack.
unit
Item No.
Pack.
unit
Hand / Auto module 789-810 1 789-811 1
Technical Data
Voltage supply 24 V DC 20 % 24 V DC 20 %
Dielectric strength input / output 4 kV
(WAGO 734 and 231 Series) CAGE CLAMP
(WAGO 734 and 231 Series)

0.08 mm ... 2.5 mm / AWG 28 ... 12
0.08 mm ... 1.5 mm / AWG 28 ... 14
0.08 mm ... 2.5 mm / AWG 28 ... 12
Stripped lengths 7 mm / 0.28 in
8 ... 9 mm / 0.33 in
7 mm / 0.28 in
8 ... 9 mm / 0.33 in
Approvals VDE 0110 (corresponding parts) VDE 0110 (corresponding parts)
Inputs
No. 1/10 24 V Operating voltage supply 24 V Operating voltage supply
No. 2 GND ground GND ground
No. 3 ... 6 DI-0 ... 3; Input 0 ... 3; 24 V/max. 20 mA AI-0 ... 3; Input 0 ... 3; 0-10 V/max. 20 mA
No. 11 WD-IN; Watchdog input; 24 V/max. 20 mA WD-IN; Watchdog input; 24 V/max. 20 mA
Outputs
No. 7 H-C; Manual operation "closed" H-C; Manual operation "closed"
No. 8 H-CM; Manual operation "common" H-CM; Manual operation "common"
No. 9 H-O; Manual operation "open" H-O; Manual operation "open"
No. 12/15/18/21 DO-0 ... 3-NC; Break contact; channel 0 ... 3 GND
No. 13/16/19/22 DO-0 ... 3-CM; Common; channel 0 ... 3 AO-0 ... 3; Output 0 ... 3; 0-10 V/max. 20 mA
No. 14/17/20/23 DO-0 ... 3-NO; Make contact; channel 0 ... 3 GND
Max. switching voltage channel nos. 12 ... 23 250 V AC / 30 V DC
Max. switching current channel nos. 12 ... 23 8 A AC / 8 A DC
DI 0..3 24 V WD-IN
Watchdog
W
Auto/Hand
0..3
0..3
H 0..3
24 V
24 V
0 V
24 V
0 V
H-O
H-C
H-CM
Watchdog-
Input
Manual Input
Manual Input
Status
DO 0..3-NC
DO 0..3-NO
DO 0..3-CM
AI 0..3 24 V WD-IN
Watchdog
W
Auto/Hand
H
24 V
10 V
H-O
H-C
H-CM
Watchdog-
Input 0..3
Manual Input 0..3
Manual Input Status
AO 0..3
WAGO Application: Trac Control System in
Canton of Tessin (Gotthard Route), Switzerland
WAGO Products:
WAGO-I/O-SYSTEM (ETHERNET, CANopen),
WAGO X-COM
-SYSTEM,
MULTICONNECTION SYSTEM,
TOPJOB
S Rail-Mounted Terminal Blocks

2
174
2
289 Series
RJ-45 Interface Modules 204 206
289 Series
Interface Modules for Ribbon Cable Connectors 184 189
Interface Module with High Density D-Sub Header for 19" Racks 190
289, 704, 706 Series
Interface Modules for System Wiring
- Interface Modules for Siemes-SIMATIC 191 194
- Relay Output Module with Miniature Switching Relay 196 202
WAGO Ribbon Cables 203
289 Series
Connection Modules for Sensors and Actuators 208 209
289 Series
Rail-Mounted Modules - Diode Gates 210 213
Rail-Mounted Modules - Resistor Gates 214
289 Series
Interface Modules with D-Subminiature Male and Female Connector 176 183
289 Series
Rail-Mounted Modules for Building Custom Circuits 215
Interface Modules
2
2
175
2
2
176
Interface Modules
Interface module
with D-subminiature male connector,
for mating connectors with solder connection,
mating direction vertical
Mounting carrier for DIN 35 rail
Interface module
for mating connectors with IDC,
289-440 to 289-444
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
Interface module 9 38 289-445 1 9 38 289-440 1
15 53.5 289-446 1 15 53.5 289-441 1
25 79 289-447 1 25 79 289-442 1
37 120 289-448 1 37 120 289-443 1
50 157 289-449 1 50 157 289-444 1
Technical Data
Operating voltage 125 V AC / DC 125 V AC / DC
Connector contact plating, 0.5 m ... 0.8 m Au over 2 m Ni plating, 0.5 m ... 0.8 m Au over 2 m Ni
Performance level 2 / 200 mating cycles 2 / 200 mating cycles
IEC 60664-1
50 V / 0.8 kV / 2 50 V / 0.8 kV / 2
Dimensions (mm) W x H x L incl.
mounting feet or mounting carrier
W x 19 x 63,5 W x 19 x 63,5
(WAGO 236 Series)

(1) (2) (3) (4)
(14) (15) (16)
1 2 3 4 5 6 7 8
at cable
25 poles
conductor no.
Sub-Min-D-
connector
25 poles
terminal strip
terminal strip
locking thread - strain relief UNC 4-40
etc.
(no. of pins
in brackets)
1 2 3 ...
1 2 3 ...
... 50 max.
26 27 28 ...
1 3 5 ...
1 3 5 ...
2 4 ... 50 max.
2 4 6 ...
2
177
2
Interface module
Interface module
289-540 to 289-544
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
15 46 289-546 1 15 46 289-541 1
25 72 289-547 1 25 72 289-542 1
37 102 289-548 1 37 102 289-543 1
50 94 289-549 1 50 94 289-544 1
Technical Data
IEC 60664-1
125 V / 0.8 kV / 2 125 V / 0.8 kV / 2
W x 34 x 85 W x 34 x 85
(WAGO 236 Series)

Accessories
(1) (2) (3) (4)
(14) (15) (16)
1 2 3 4 5 6 7 8
Flachbandkabel
25 pol.
Ader-Nr.
Sub-Min-D-
Stecker, 25 pol.
Klemmenleiste
Klemmenleiste
Verriegelungsgewinde Zugentlastung UNC 4-40
usw.
(in Klammern die
Stiftnummern)
1 2 3 ...
1 2 3 ...
... 50 max.
26 27 28 ...
1 3 5 ...
1 3 5 ...
2 4 ... 50 max.
2 4 6 ...
2
178
Interface Modules
Interface module
with D-subminiature female connector,
Interface module
289-450 to 289-454
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
15 53.5 289-456 1 15 53.5 289-451 1
25 79 289-457 1 25 79 289-452 1
37 120 289-458 1 37 120 289-453 1
50 157 289-459 1 50 157 289-454 1
Technical Data
IEC 60664-1
50 V / 0.8 kV / 2 50 V / 0.8 kV / 2
W x 19 x 63,5 W x 19 x 63,5
(WAGO 236 Series)

(1) (2) (3) (4)
(14) (15) (16)
1 2 3 4 5 6 7 8
at cable
25 poles
conductor no.
Sub-Min-D-
connector
25 poles
terminal strip
terminal strip
locking thread - strain relief UNC 4-40
etc.
(no. of pins
in brackets)
1 2 3 ...
1 2 3 ...
... 50 max.
26 27 28 ...
1 3 5 ...
1 3 5 ...
2 4 ... 50 max.
2 4 6 ...
2
179
2
Interface module
Interface module
with D-Subminiature female connector,
289-550 to 289-554
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
15 46 289-556 1 15 46 289-551 1
25 72 289-557 1 25 72 289-552 1
37 102 289-558 1 37 102 289-553 1
50 94 289-559 1 50 94 289-554 1
Technical Data
IEC 60664-1
125 V / 0.8 kV / 2 125 V / 0.8 kV / 2
W x 34 x 85 W x 34 x 85
(WAGO 236 Series)

Accessories
(1) (2) (3) (4)
(14) (15) (16)
1 2 3 4 5 6 7 8
Flachbandkabel
25 pol.
Ader-Nr.
Sub-Min-D-
Stecker, 25 pol.
Klemmenleiste
Klemmenleiste
Verriegelungsgewinde Zugentlastung UNC 4-40
usw.
(in Klammern die
Stiftnummern)
26 27 28 ...
1 2 3 ...
... 50 max.
1 2 3 ...
2 4 6 ...
1 3 5 ...
2 4 ... 50 max.
1 3 5 ...
2
180
Interface Modules
Interface module
mating direction vertical,
shield (screen) connection
Interface module
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
Interface module 9 33 289-575 1 9 38.5 289-585 1
15 43 289-576 1 15 46 289-586 1
25 68.5 289-577 1 25 71.5 289-587 1
37 99 289-578 1 37 102 289-588 1
Technical Data
IEC 60664-1
125 V / 0.8 kV / 2 125 V / 0.8 kV / 2
W x 34 x 85 W x 34 x 85
(WAGO 236 Series)

Accessories
26 27 28 ...
1 2 3 ...
... 50 max.
1 2 3 ...
S 1 2 3 ...
1 2 3 ...
... 50 max.
26 27 28 ... s
2
181
2
Interface module
Interface module
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
37 74 289-624 1 37 74 289-621 1
Technical Data
IEC 60664-1
125 V / 0.8 kV / 2 125 V / 0.8 kV / 2
Mounting direction vertical
Pull relief stud bolt UNC 4-40
W x 62 x 85 W x 62 x 85
(WAGO 737 Series)

Accessories
2
182
Interface Modules
Interface module
with D-subminiature female connector
with shield (screen) connection
Description
No. of
Poles
Width Item No.
Pack.
Unit
Interface module 9 33 289-650 1
25 68.5 289-652 1
Technical Data
Operating voltage 125 V AC / DC
Nominal current 2 A
Connector contact plating, 0.5 m ... 0.8 m Au over 2 m Ni
Contact resistance < 10 m
Performance level 2 / 200 mating cycles
IEC 60664-1
125 V / 0.8 kV / 2
W x 48 x 85
(WAGO 736 Series)

Accessories
14 15 16 ...
... 25 max.
1 2 3 ...
S
2
183
2
Interface module
with D-subminiature male connector
Interface module
with D-subminiature female connector
1 solder pin per pole is available for testing and patching
(except for shield (screen) contact)
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
Interface module 9 33.5 289-720 1 9 33.5 289-725 1
15 43.5 289-721 1 15 43.5 289-726 1
25 69 289-722 1 25 69 289-727 1
37 99.5 289-723 1 37 99.5 289-728 1
Technical Data
IEC 60664-1
125 V / 0.8 kV / 2 125 V / 0.8 kV / 2
Mounting direction vertical vertical
Pull relief stud bolt UNC 4-40 UNC 4-40
W x 48 x 85 W x 48 x 85
(WAGO 736 Series)

Accessories
1 2 3 . . . 37
1 2 3 ... ... ... ... 19
20 21 22 ... ... ... 37 S
1 2 3 . . . 37
20 21 22 ... ... ... 37 S
1 2 3 ... ... ... ... 19
2
184
Interface Modules
Interface module
for ribbon cable connectors
acc. to DIN 41651
Interface module
for ribbon cable connectors
acc. to DIN 41651
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
14 40 289-612 1 26 55 289-615 1
16 45 289-613 1 34 65 289-616 1
40 74 289-617 1
50 88 289-618 1
64 114 289-619 1
Technical Data
Connector contact phosphor-bronze, 0.38 m Au selectively over 1.3 m Ni phosphor-bronze, 0.38 m Au selectively over 1.3 m Ni
IEC 60664-1
125 V / 0.8 kV / 2 125 V / 0.8 kV / 2
Mounting direction vertical vertical
W x 48 x 85 W x 62 x 85
(WAGO 737 Series)

Approvals IEC 60603-1 / DIN 41651 Part 1 and 2 IEC 60603-1 / DIN 41651 Part 1 and 2
Accessories
1
1 3 5 ...
16
15
2 4 6 ...
1
1 4 7 ...
64
63
nc
2 5 8 ...
3 6 9 ...
2
185
2
Interface module
with header
acc. to DIN 41 651
Interface module
with header
acc. to DIN 41 651
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
14 51.5 289-402 1 14 43 289-502 1
16 56.5 289-403 1 16 46 289-503 1
20 66.5 289-404 1 20 53.5 289-504 1
26 81 289-405 1 26 71 289-505 1
34 102 289-406 1 34 94 289-506 1
40 126 289-407 1 40 114 289-507 1
50 151 289-408 1 50 132 289-508 1
64 187 289-409 1 64 170 289-509 1
64 120 289-510 1
Technical Data
IEC 60664-1
50 V / 0.8 kV / 2 50 V / 0.8 kV / 2
W x 28 x 63,5 W x 36 x 85
(WAGO 236 Series)

Accessories
2 4 6 ...
1
1 3 5 ...
2 4 6 ...
1
1 3 5 ...
2
186
Interface Modules
Interface module
for connectors acc. to DIN 41 612,
with male connector, type E,
with strain relief device
for ERNI mating connector
Interface module
with male connector, type F,
with strain relief device
for Harting mating connector
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
Technical Data
Connector contact Copper alloy, gold plated Copper alloy, gold plated
IEC 60664-1
250 V / 1.5 kV / 2 250 V / 1.5 kV / 2
W x 55 x 85 W x 39 x 85
(WAGO 236 Series)

Accessories
ERNI 333
050
2
5
0
V

4
A
Harting 09 06 0482905
2
5
0
V

4
A
2
187
2
Interface module
with male connector, type C,
Interface module
with male connector, type C,
mating direction horizontal
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
Interface module, for female connector
with IDC 64 187 289-422 1 64 187 289-423 1
with solder contact 32 97 289-424 1 32 97 289-425 1
with solder contact 64 187 289-426 1 64 187 289-427 1
Technical Data
IEC 60664-1
50 V / 0.8 kV / 2 50 V / 0.8 kV / 2
W x 21 x 63,5 W x 21 x 63,5
(WAGO 236 Series)

1 3 ...
2 4 ...
1 3 ...
2 4 ...
a
c
a
c
2 4 6 ...
2 4 6 ...
2 4 6 ...
2 4 6 ...
a
c
a
c
289-422
1 2 3 ...
1 2 3 ...
1 2 3 ...
1 2 3 ...
a
c
a
c
289-424 289-426
1 3 ...
2 4 ...
1 3 ...
2 4 ...
a
c
a
c
2 4 6 ...
2 4 6 ...
2 4 6 ...
2 4 6 ...
a
c
a
c
289-423
1 2 3 ...
1 2 3 ...
1 2 3 ...
1 2 3 ...
a
c
a
c
289-425 289-427
2
188
Interface Modules
Interface module
with female connector, type C,
mating direction vertical, for male connector
with solder contact
Interface module
mating direction vertical, for female connector
with IDC connection or with solder contact
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
64 187 289-431 1 64 171 289-526 1
Technical Data
IEC 60664-1
50 V / 0.8 kV / 2 125 V / 0.8 kV / 2
W x 21 x 63,5 W x 34 x 85
(WAGO 236 Series)

Accessories
2 4 6 ...
2 4 6 ...
2 4 6 ...
2 4 6 ...
c
a
c
a
1 2 3 ...
1 2 3 ...
1 2 3 ...
1 2 3 ...
c
a
c
a
289-430 289-431
1 3 ...
2 4 ...
1 3 ...
2 4 ...
a
c
a
c
1 2 3 ...
1 2 3 ...
1 2 3 ...
1 2 3 ...
a
c
a
c
289-522 289-526
2
189
2
Interface module
mating direction horizontal, for female
connector with IDC connection or with solder
contact
Interface module
mating direction vertical, for male connector
with solder contact
Description
No. of
Poles
Width Item No.
Pack.
Unit
No. of
Poles
Width Item No.
Pack.
Unit
64 171 289-527 1
Technical Data
IEC 60664-1
125 V / 0.8 kV / 2 125 V / 0.8 kV / 2
W x 34 x 85 W x 34 x 85
(WAGO 236 Series)

Accessories
1 3 ...
2 4 ...
1 3 ...
2 4 ...
a
c
a
c
1 2 3 ...
1 2 3 ...
1 2 3 ...
1 2 3 ...
a
c
a
c
289-523 289-527
1 2 3 ...
1 2 3 ...
1 2 3 ...
1 2 3 ...
c
a
c
a
2
190
Interface Modules
Interface module
with high density D-sub header
for 19" racks
Description
No. of
Poles
Width Item No.
Pack.
Unit
Interface module for 19" racks 62 80 289-822 1
Technical Data
Operating voltage 125 V AC / DC
Nominal current 1 A
Connector contact Copper alloy, gold-plated 0.8 m
Contact resistance d 10 m
Performance level 2 to DIN 41652 400 mating cycles, without corrosion
IEC 60664-1
125 V / 0.8 kV / 2
Touch-proof terminal strip IP20
Touch-proof HD D-sub header IP00
W x 27 x 132
(WAGO 739 Series)

Cross sections 0.08 mm ... 1.5 mm / AWG 28 ... 14 *
* (AWG14: THHN, THWN)
Approvals EN 60664
2
191
2
2
192
Interface Modules
for Siemens-SIMATIC
S5-95 U to 155 U, S7-300/ET 200 M and S7-400

SIMATIC

is a registered trademark of the
Siemens AG
Interface module, 8-pole,
for Siemens-SIMATIC
S5-95 U to 155 U,
S7-300/ET 200 M und S7-400
Single-wire connection,
without LED
for Siemens-SIMATIC
S5-95 U to 155 U,
S7-300/ET 200 M und S7-400
with LED
Description Width Item No.
Pack.
Unit
Width Item No.
Pack.
Unit
Interface module 44 289-680 1 44 289-681 1
Technical Data
Operating voltage 125 V AC/DC 24 V DC
Nominal current per signal wire 1 A 1 A
Max. total current (supply) 2 A 2 A
IEC 60664-1
125 V / 0.8 kV / 2
W x 48 x 85 W x 48 x 85
(WAGO 736 Series)

Accessories
2
193
2
SIMATIC

Siemens AG
for Siemens-SIMATIC
S5-95 U to 155 U,
S7-300/ET 200 M und S7-400
3-wire sensors,
without LED
for Siemens-SIMATIC
S5-95 U to 155 U,
S7-300/ET 200 M und S7-400
3-wire sensors,
with LED
Pack.
Unit
Width Item No.
Pack.
Unit
Technical Data
Max. total current (supply) 2 A 2 A
IEC 60664-1
125 V / 0.8 kV / 2
W x 62 x 85 W x 62 x 85
(WAGO 737 Series)

Accessories
2
194
Interface Modules
for Siemens-SIMATIC
S5-95 U to 155 U, S7-300/ET 200 M and S7-400

SIMATIC

Siemens AG
for Siemens-SIMATIC
S5-95 U to 155 U,
S7-300/ET 200 M und S7-400
without LED
for Siemens-SIMATIC
S5-95 U to 155 U,
S7-300/ET 200 M und S7-400
with LED
Pack.
Unit
Width Item No.
Pack.
Unit
Technical Data
Max. total current (supply) 2 A / byte 2 A / byte
IEC 60664-1
125 V / 0.8 kV / 2
W x 48 x 85 W x 48 x 85
(WAGO 736 Series)

Accessories
2
195
2
SIMATIC

Siemens AG
for Siemens-SIMATIC
S5-95 U to 155 U,
S7-300/ET 200 M und S7-400
3-wire sensors,
without LED
for Siemens-SIMATIC
S5-95 U to 155 U,
S7-300/ET 200 M und S7-400
3-wire sensors,
with LED
Pack.
Unit
Width Item No.
Pack.
Unit
Technical Data
Max. total current (supply) 2 A / byte 2 A / byte
IEC 60664-1
125 V / 0.8 kV / 2
W x 62 x 85 W x 62 x 85
(WAGO 737 Series)

Accessories
2
196
The new 750-14xx and 750-15xx Series
I/O Modules with at ribbon cable
connection oer 16 digital channels in a
module less than 12 inch (12mm) wide.
Oering quick connections and a space-
ecient design, the DIN-rail mount interface
modules simplify installation in conned
areas and relocate the termination point.
When combined with WAGO interface
modules (e.g., item no. 289-614, 289-
611), a switch cabinet can be pre-wired
before install to minimize wiring time
and errors. This is benecial as wiring
can be performed independently of a
plants construction. Pre-wired electronics
can be installed right before start-up,
saving valuable time during nal stages
of project completion. The modules are
also ideal for connecting series machines
or relay modules tasked with the higher
loads common to buildings and industrial
applications. The interface module also
combines the advantages of relays (e.g.,
manual operation or rapid replacement
with socked-mounted versions) with the
benets of a modern I/O system.
Another ideal application would be the
integration of pneumatic controllers into a
eldbus network.
Most pneumatic modules have an
appropriate connector and can be
controlled by the WAGO-I/O-SYSTEM.
Five variants are available: two 16-channel
input or output modules (one high-side and
one low-side switching variant), as well as a
version combining 8 inputs and 8 outputs.
16-Channel I/O Module with Interface Module
2
197
2
Item. No. Designation PLC Card
704-5024
704-5044
704-5004
704-5014
704-5034
704-5054
704-5074
704-5064
T16S
Siemens S7-300
6ES7 313-5BE01-0AB0 6ES7 314-6CG03-0AB0
6ES7 313-5BF03-0AB0 6ES7 322-1BH01-0AA0
6ES7 313-6BE01-0AB0 6ES7 322-1BH10-0AA0
6ES7 313-6BF03-0AB0 6ES7 322-1BH80-0AA0
6ES7 313-6CE01-0AB0 6ES7 322-1BL00-0AA0
6ES7 313-6CF03-0AB0 6ES7 322-1BP00-0AA0
6ES7 314-6BF01-0AB0 6ES7 322-1EH01-0AA0
6ES7 314-6BG03-0AB0 6ES7 323-1BL00-0AA0
6ES7 314-6CF01-0AB0
GEFANUC 90-30 / ALSPA 80-35
IC693 MDL740 IC693 MDL753
IC693 MDL742
SCHNEIDER TSX 37 ( Micro )
TSX DMZ 28DT TSX DMZ 64DTK
TSX DMZ 28DTK
SCHNEIDER TSX 57 ( Premium )
TSX DSY 16T2 TSX DMY 28FK
TSX DSY 32T2K TSX DMY 28RFK
TSX DSY 64T2K
SCHNEIDER M340
BMX DDO 1602 BMX DDO 6402K
BMX DDO 3202K BMX DDM 3202K
SCHNEIDER QUANTUM
140 DDO 353 00 140 DDO 843 00
140 DDO 353 01 140 DVO 853 00
140 DDO 364 00
ROCKWELL COMPACT-LOGIX (1769)
1769 - OB16 1769 - OB32
1769 - OB16P 1769 - OB32T
ROCKWELL CONTROL-LOGIX (1756)
1756 - OB16D 1756 - OB32
1756 - OB16E
WAGO-I/O-SYSTEM 750/753
753-530 (x2)
750-1500
704-5003
704-5013
T8S
SIEMENS S7-300
6ES7 312-5BD01-0AB0 6ES7 322-8BF00-0AB0
6ES7 312-5BE03-0AB0 6ES7 323-1BH01-0AA0
6ES7 322-1BF01-0AA0 6ES7 327-1BH00-0AB0
GEFANUC 90-30 / ALSPA 80-35
IC693 MDL730 TSX DSZ 08T2
IC693 MDL732 TSX DSZ 08T2K
TSX DSZ 04T22 TSX DMZ 16DTK
SCHNEIDER TSX 57 ( Premium ) TSX DSY 08T2
SCHNEIDER M340 BMX DDM 16022
SCHNEIDER QUANTUM 140 DDM 390 00
ROCKWELL COMPACT LOGIX (1769) 1769 - OB8
ROCKWELL CONTROL LOGIX (1756)
1756 - OB8 1756 - OB8I
1756 - OB8EI
WAGO-I/O-SYSTEM 750/753
753-530
750-1502, -1500
Application Examples
2
198
Relay output module with miniature switching
relay for 16 channels, 1 changeover contact
each (1 u) with integrated status indication,
20-pole ribbon cable connector to DIN 41651
each (1 u) with integrated status indication
and manual operation,
Pack.
Unit
Item No.
Pack.
Unit
Switching relay module,
for DIN 35 rail
704-5024 1 704-5044 1
Technical Data
Contact type 1 changeover contact 1 changeover contact
Operating voltage 24 V DC ( 10 %) 24 V DC ( 10 %)
Max. switching power (resistive) 1250 VA / 50 W 1250 VA / 50 W
Status indication LED green : Channel
LED yellow : Power supply
LED green : Channel
6
6
Fuse Supply: 1 A
Relay output:
Supply: 1 A
Relay output:
Dimensions (mm) L x W x H incl. mounting carrier and relay 111 x 65 x 105 121 x 65 x 105
Wire connection Input: 20-pole ribbon cable connector to DIN 41651
Output: CAGE CLAMP
Input: 20-pole ribbon cable connector to DIN 41651

Output: CAGE CLAMP
Application examples see page 197 see page 197
Accessories Spare relay 857-152 Spare relay 857-152
1 16
Rel. 1 Rel. 16

18 20 17 19
F

=

1
A
+F +
11 14 12 161 164 162
1 16
Rel. 1 Rel. 16

18 20 17 19
F

=

1
A
O
N
O
F
F
A
U
T
O
+F +
11 14 12 161 164 162
O
N
O
F
F
A
U
T
O
2
199
2
and output fuse,
Pack.
Unit
Item No.
Pack.
Unit
for DIN 35 rail
704-5004 1 704-5034 1
Switching relay module without miniature switching
704-5014 1
Technical Data
Inrush current 2 s 16 A 2 s 16 A
LED green : Channel
6
6
Fuse Supply: 1 A
Relay output:
Supply: 1 A
Relay output: 5 A
Output: CAGE CLAMP

Output: CAGE CLAMP
1 16
Rel. 1 Rel. 16

18 20 17 19
F

=

1
A
+F +
11 14 12 161 164 162
1 16
5
A
5
A
Rel. 1 Rel. 16

18 20 17 19
F

=

1
A
+F +
11 14 12 161 164 162
2
200
relay for 16 channels, 1 make contact each
(1 a) with integrated status indication,
disconnect terminal block and output fuse,
relay for 16 channels, 1 make contact each
(1 a) with integrated status indication, double
disconnect terminal block and output fuse,
Pack.
Unit
Item No.
Pack.
Unit
for DIN 35 rail
704-5054 1 704-5074 1
Technical Data
Contact type 1 make contact 1 make contact
LED green : Channel
6
6
Fuse Supply: 1 A
Relay output: 2 A
Supply: 1 A
Relay output: 5 A
Output: CAGE CLAMP

Output: CAGE CLAMP

C1 C1 C2 C2 1F 1K 8F 8K
2
A
2
A
Rel. 1 Rel. 8
F

=

1
A
+F +

2
A
2
A
Rel. 9 Rel. 16
C3 C3 C4 C4 9F 9K 16F 16K
1 8

18 20 17 19 9 16

5
A
5
A
1

11 14
16
Rel. 1 Rel. 16
161 164

18 20 17 19
F

=

1
A
+F +
2
201
2
relay for 16 channels, 2 changeover contacts
Pack.
Unit
for DIN 35 rail
704-5064 1
Technical Data
Contact material AgNi 90/10
Contact type 2 changeover contact
Operating voltage 24 V DC ( 10 %)
Inrush current 2 s 8 A
Max. switching power (resistive) 1000 VA / 50 W
6
Dielectric strength contact-contact 1 kV
Fuse Supply: 1 A
Relay output:
Dimensions (mm) L x W x H incl. mounting carrier and relay 247 x 50 x 105
Output: CAGE CLAMP

Application examples see page 197
Accessories Spare relay 788-156

1
1
4
1
1
2
1
2
1
1
2
4
1
2
2
1
1
1
1
6
1
1
1
6
1
4
1
6
1
2
1
6
2
1
1
6
2
4
1
6
2
2
1 16
Rel. 1 Rel. 16

18 20 17 19
F

=

1
A
+F +
2
202
and manual operation,
Pack.
Unit
Item No.
Pack.
Unit
for DIN 35 rail
704-5003 1 704-5013 1
Technical Data
LED green : Channel
6
6
Fuse Supply: 1 A
Relay output:
Supply: 1 A
Relay output:
Output: CAGE CLAMP

Output: CAGE CLAMP
1 8
Rel. 1 Rel. 8

10 9
F

=

1
A
+F +
11 14 12 81 84 82
1 8
Rel. 1 Rel. 8

10 9
F

=

1
A
O
N
O
F
F
A
U
T
O
+F +
11 14 12 81 84 82
O
N
O
F
F
A
U
T
O
2
203
2
WAGO Ribbon Cables
WAGO ribbon cables provide fast and easy connection of WAGO I/O modules
equipped with a ribbon cable connector (750-1400, -1402, -1500, -1501, 1502) to
appropriate interface or relay modules (16-channel) featuring a 20-pole female
connector. The cables are available in 1-, 2- and 3-meter lengths; each has one 20-pole
female connector at both ends.
WAGO ribbon cables provide fast and easy connection of WAGO I/O modules
equipped with a ribbon cable connector (750-1400, -1402, -1500, -1501, 1502) to
appropriate interface or relay modules featuring a 10-pole female connector. For
example, this cable connects 2 relay modules (8-channel) to a WAGO I/O module. The
cables are available in 1- and 2-meter lengths; each has one 20-pole and two 10-pole
female connectors on the ends.
Pack.
Unit
Pack.
Unit
WAGO ribbon cable 20/20, lenght 1 m 706-3057/300-100 1 WAGO ribbon cable 20/2x10, lenght 1 m 706-7753/302-100 1
WAGO ribbon cable 20/20, lenght 2 m 706-3057/300-200 1 WAGO ribbon cable 20/2x10, lenght 2 m 706-7753/302-200 1
WAGO ribbon cable 20/20, lenght 3 m 706-3057/300-300 1
Connections 2 x 20-pole female connector
acc. to DIN 41651
Connections 1 x 20-pole / 2 x 10-pole female
connector
2
LiYY Wire cross-section 0.14 mm
2
LiYY
Color coding acc. to DIN VDE 47100 Color coding acc. to DIN VDE 47100
Current per channel max. 1 A Current per channel max. 1 A
Operating temperature -25 C ... +70 C Operating temperature -25 C ... +70 C
Degree of protection IP20 Degree of protection IP20
Length 1 m (706-3057/300-100)
2 m (706-3057/300-200)
3 m (706-3057/300-300)
Length 1 m (706-7753/302-100)
2 m (706-7753/302-200)
2
204
Interface Modules
RJ-45 interface module
with shield clamping unit
for WAGO shield (screen) clamping saddle
cross-over connection
Pack.
Unit
Item No.
Pack.
Unit
Interface module 289-178 1 289-177 1
Technical Data
Connecting cable min. CAT5 min. CAT5
Max. transmission length 100 m 100 m
Connector RJ-45 shielded RJ-45 shielded
Min. mating cycles 1000 1000
Current load d 2.1 A d 2.1 A
Voltage load 35 V AC / 50 V DC 35 V AC / 50 V DC
Insulation resistance > 500 M > 500 M
Dielectric strength contact-contact 1 kV eff. 1 kV eff.
Contact resistance typ. 40 m typ. < 40 m
WAGO shield (screen) clamping saddle 11 mm wide; cable diameter up to 8 mm
30 x 67 x 85 30 x 51 x 85
(WAGO 739 Series)

Approvals ISO/IEC 11801: 2002-09; EN 55022 ISO/IEC 11801: 2002-09; EN 55022
Accessories
2
205
2
Pack.
Unit
Item No.
Pack.
Unit
Technical Data
Voltage load 30V AC / 42 V DC 35 V AC / 50 V DC
Contact resistance typ. < 20 m < 40 m
20,5 x 51 x 85 30 x 51 x 85
Accessories
1 2 3 4 5 6 7 8
S
1 2 3 4 5 6 7 8
S
A 1 2 3 4 5 6 7 8 B
S
A 1 2 3 4 5 6 7 8 B
S
2
206
Interface Modules
Pack.
Unit
Item No.
Pack.
Unit
Technical Data
Contact resistance typ. < 20 m typ. < 20 m
24 x 40 x 85 24 x 40 x 85
(WAGO 739 Series)

Accessories
WAGO shield (screen) clamping saddle 790-108 (11 mm wide; cable diameter up to 8 mm) 790-108 (11 mm wide; cable diameter up to 8 mm)
2
207
2
2
208
Connection Modules for Sensors and Actuators
Front-entry
Connection module
for 8 x 3-conductor sensors
Connection module
for 8 x 3-conductor sensors
LED indicator for positive or negative
switching
Graphic 289-665
Pack.
Unit
Item No.
Pack.
Unit
Connection module 289-664 1 289-665 1
289-666 1
Technical Data
Operating voltage 125 V AC/DC 24 V DC ( 10 %)
Max. current per connection 1 A 1 A
Power consumption LED 5.2 mA
IEC 60664-1
125 V / 1.5 kV / 2
56 x 34 x 85 56 x 34 x 105
(WAGO 236 Series)

Accessories
+
+
+
+
+
+
+
+
+
+
8
7
6
5
4
3
2
1
1
2
3
4
5
6
7
8
<__________ 85 _________>
<
_
_
_
_
_
_

5
6

_
_
_
_
_
_
>
8
7
6
5
4
3
2
1
1
2
3
4
5
6
7
8
<_____________105 ______________>
+
+
+
+
+
+
+
+
+
+
<
_
_
_
_
_
_

5
6

_
_
_
_
_
_
>
2
209
2
Connection module
for 8 actuators
Connection module
for 8 actuators with ground (earth) contact
Pack.
Unit
Item No.
Pack.
Unit
Connection module 289-667 1 289-671 1
Technical Data
Max. current per connection 1 A 1 A
IEC 60664-1
125 V / 1.5 kV / 2 125 V / 1.5 kV / 2
56 x 34 x 85 56 x 34 x 85
(WAGO 236 Series)

Accessories
8
7
6
5
4
3
2
1
1
2
3
4
5
6
7
8
<_________ 85 _________>
<
_
_
_
_
_
_

5
6

_
_
_
_
_
_
>
8
7
6
5
4
3
2
1
1
2
3
4
5
6
7
8
<__________ 85 _________>
<
_
_
_
_
_
_

5
6

_
_
_
_
_
_
>
2
210
Rail-Mounted Modules - Diode Gates
Open diode gate
with 8 diodes 1 N 4007
can be connected individually
Open diode gate
with 8 diodes P 600 B
* Max. admissible current acc. to the manufacters data
sheet. With all diodes loaded, the continuous current must
be reduced.
Pack.
Unit
Item No.
Pack.
Unit
Open diode gate 289-101 1 289-103 1
Technical Data
Rectified current for each diode * 1 A 6 A
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
47 x 31.5 x 65.5 47 x 31.5 x 65.5
(WAGO 236 Series)

Pack.
Unit
Item No.
Pack.
Unit
separately)
288-001 1 288-001 1
Universal mounting foot; snap-fit type; suitable for DIN 15,
32 and 35 rails (also see page 258)
288-002 10 288-002 10
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
2
211
2
Open diode gate
with 9 diodes 1 N 5408
2 inputs/2 outputs per diode including
be reduced.
Pack.
Unit
Open diode gate 289-105 1
Technical Data
Operating voltage 250 V AC/DC
Rectified current for each diode * 3 A
Rectified current for each diode 10 A
Forward voltage for each Diode 1.3 V
Forward current (resistent) for each diode 3 A
IEC 60664-1
250 V / 4 kV / 3
51 x 48 x 85
(WAGO 736 Series)

Accessories
2 4 6 8 10 12 14 16 18
1 3 5 7 9 11 13 15 17
2
212
Rail-Mounted Modules - Diode Gates
Polarized diode gate
with 14 diodes 1 N 4007 common cathode
Polarized diode gate
with 14 diodes 1 N 4007 common anode
be reduced.
Pack.
Unit
Item No.
Pack.
Unit
Polarized diode gate 289-111 1 289-121 1
Technical Data
Rectified current for each diode * 1 A 1 A
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
47 x 31.5 x 65.5 47 x 31.5 x 65.5
(WAGO 236 Series)

Pack.
Unit
Item No.
Pack.
Unit
separately)
288-001 1 288-001 1
288-002 10 288-002 10
+
+
1 2 3 4 5 6 7
8 9 10 11 12 13 14
+
+
1 2 3 4 5 6 7
8 9 10 11 12 13 14
2
213
2
Lamp test circuit module
with 20 diodes for testing 10 lamps with
Mounting feet for DIN 35 rail
LED gate module
with 16 LEDs, common anode or cathode
Pack.
Unit
Item No.
Pack.
Unit
Gate module 289-151 1 289-202 1
289-201 1
Technical Data
Operating voltage range 0 V ... 250 V AC/DC 20 V ... 26 V DC
Power consumption at V
N
5.6 mA each LED
Rectified current for each diode, resistive 1 A
IEC 60664-1
250 V / 4 kV / 3
69 x 21 x 50 47 x 31.5 x 65.5
(WAGO 236 Series)

Pack.
Unit
separately)
288-001 1
288-002 10
1 3 5 7 9 11 13 15 17 19 21
2 4 6 8 10 12 14 16 18 20 22
8 7 6 5 4 3 2 1
16 15 14 13 12 11 10 9
+
8 7 6 5 4 3 2 1
16 15 14 13 12 11 10 9
+
+
2
214
Rail-Mounted Modules - Resistor Gates
Resistor gate
with 1 end commoned,
8 resistors 2 k 2; 1 W
Open resistor gate
with 8 resistors 2 k 7; 0.6 W
individual connection possible
other resistors contact factory
* Max. admissible power dissipation of a single resistor.
With all resistors loaded, the max. admissible power
dissipation must be reduced.
Pack.
Unit
Item No.
Pack.
Unit
Resistor gate 289-113 1 289-114 1
Technical Data
Resistor type DIN 0414 DIN 0207
Temperature coefficient 50 ppm 50 ppm
Tolerance 1% 1%
Power dissipation * 1 W 0.6 W
47 x 31.5 x 65.5 47 x 31.5 x 65.5
(WAGO 236 Series)

Pack.
Unit
Item No.
Pack.
Unit
separately)
288-001 1 288-001 1
288-002 10 288-002 10
2
215
2
Rail-Mounted Modules for Building Custom Circuits
Module with 2 x 8 drilled holes
Diameter of drilled holes 1 mm,
Pin spacing 3.83 mm x 16 mm
Module with 2 x 8 soldering points
Pin spacing 5 mm x 12 mm
Pack.
Unit
Item No.
Pack.
Unit
Module for building custom circuits 289-102 1 289-131 1
Technical Data
42.5 x 32 x 62.5 42.5 x 32 x 62.5
(WAGO 236 Series)

Pack.
Unit
Item No.
Pack.
Unit
separately)
288-001 1 288-001 1
288-002 10 288-002 10
WAGO Application: Danone Group,
Ochsenfurt Plant, Germany
Producer of yogurt and other dairy-based products
WAGO Products:
WAGO-I/O-SYSTEM with PROFIBUS Couplers
3
216
3
3
286 Series
Pluggable Modules - Temperature Transducers 272 276
786 Series
Pluggable Modules - Analog Signal Conditioning 278 280
Accessories 281
857 Series
JUMPFLEX
Transducers 218 267

WAGOframe 268
WAGO USB Service Cable 269
JUMPFLEX
Interface-Adapters, WAGO Ribbon Cables 270

Transducers
3
217
857-400
3
218
JUMPFLEX
Transducers
Isolation amplifier, with zero/span adjustment
OUT IN
POWER
5
6
1
2
3
4
7
8
OUT+
GND 2
Us+
GND 3
IN+
GND 1
Us+
GND 3
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
Conguration via:
DIP Switches
Short description:
The configurable 857-400 Isolation Amplifier is used to convert, amplify, filter
and electrically isolate analog standard signals.
Characteristics:
Zero/span adjustment across the entire measuring range
Calibrated scale switching
Switchable max. operating frequency
Safe 3-way isolation with 2.5kV test voltage to EN 61140
Pack.
Unit
JUMPFLEX
transducers, for DIN 35 rail 857-400 1

Isolation amplifier, with zero/span adjustment
Technical Data
Configuration:
Configuration DIP switch
Input:
Input signal 0 ... 20 mA, 4 ... 20 mA,
0... 5 V, 0 ... 10 V, 2 ... 10 V, 1 ... 5 V
(calibrated switchable)
Input resistance 50 (In = mA)
100 k (In = V)
Output:
Output signal 0 ... 20 mA, 4 ... 20 mA,
0... 5 V, 0 ... 10 V, 2 ... 10 V, 1 ... 5 V
Load impedance 600 (Out = mA)
2 k (Out = V)
Voltage supply V
N
24 V DC
Current consumption at 24 V DC 25 mA
Max. operating frequency 100 Hz / > 5 kHz
(switchable via DIP switch)
Response time (T
10-90
) < 3.5 ms / < 100 s
Transmission error 0.1 % of the full scale value
Zero/span adjustment 3% of upper range value
Technical Data
Test voltage (input/output/supply) 2.5 kV AC, 50 Hz, 1 min
S
Cross sections solid:
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Strip lengths 9 ... 10 mm / 0.37 in
Weight 36.8 g
r UL 508
r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4
Shipbuilding g (pending)
Accessories see pages 268 ... 271
3
219
3
= ON 857-400 DIP Switch Adjustability
Dip Switch S1 (2-fold) Dip Switch S2 (6-fold)
Input Signal Output Signal
Max. Operating
Frequency
1 2 1 2 3 4 5 6
0 ... 20 mA 0 ... 20 mA 100 Hz
4 ... 20 mA > 5 kHz
0 ... 10 V
2 ... 10 V
0 ... 5 V
1 ... 5 V
4 ... 20 mA 0 ... 20 mA
4 ... 20 mA
0 ... 10 V
2 ... 10 V
0 ... 5 V
1 ... 5 V
0 ... 10 V 0 ... 20 mA
4 ... 20 mA
0 ... 10 V
2 ... 10 V
0 ... 5 V
1 ... 5 V
2 ... 10 V 0 ... 20 mA
4 ... 20 mA
0 ... 10 V
2 ... 10 V
0 ... 5 V
1 ... 5 V
0 ... 5 V 0 ... 20 mA
4 ... 20 mA
0 ... 10 V
2 ... 10 V
0 ... 5 V
1 ... 5 V
1 ... 5 V 0 ... 20 mA
4 ... 20 mA
0 ... 10 V
2 ... 10 V
0 ... 5 V
1 ... 5 V
Default Settings
Input 0 ... 20 mA
Output 0 ... 20 mA
Max. Operating Frequency 100 Hz
857-401
3
220
JUMPFLEX
Transducers
Isolation amplifier, configurable with digital output
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT+
GND 2
OUT
U,I
Us+
GND 3
POWER
IN+
GND 1
DO
GND 3
5
6
IN
U,I
1
2
DO
3
4
7
8
Conguration via:
DIP Switches Conguration
Software
Short description:
The software-configurable 857-401 Isolation Amplifier converts standard signals and
amplifies, filters and electrically isolates analog standard signals.
Characteristics:
FDT/DTM configuration interface
Digital switching output
Analog, unipolar and bipolar, standard signals at input
Clipping capability allows analog standard signal limitation to upper range values.
Pack.
Unit
JUMPFLEX

Isolation amplifier, configurable
with digital output
Technical Data
Configuration:
Configuration DIP switch or configuration software
Input:
Input signal -20 ... +20mA, -10 ... +10V, 0 ... +30V *
Input resistance 200 (I input)
> 100 k (U input)
Max. input signal (31.2 V (U
IN
) 100 mA (I
IN
)
Output:
Output signal 0 - 20mA, 4 - 20mA,
0 - 5V, 1 - 5V, 0 - 10V, 2 - 10V,
0 - 10mA, 2 - 10mA*
Load impedance 600 (I output)
2 k (U output)
Step response 8ms
Output - Digital
Max. switching voltage Supply voltage applied
Max. continuous current 500 mA (up to 60 C)
100 mA (60 C ... 70 C)
Voltage supply V
N
24 V DC
Min. measuring span 1 V, 2 mA (configurable)
Max. Messspanne 30 V, 40 mA
Technical Data
Test voltage (input/output/supply) 2.5 kV AC, 50 Hz, 1 min.
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 42 g
r UL 508
r ANSI/ISA 12.12.01 Class I Div2 ABCD T4
( * Additional setting options are possible via FDT-/DTM configuration tool.)
3
221
3
= ON 857-401
Input Signal
Start Value
DIP S1
1 2 3 4 5 6 7 V mA 2 3 4 5 6 7 V mA
Voltage 0 0 5.5 11
Current -10 -20 6 12
-9.5 -19 6.5 13
-9 -18 7 14
-8.5 -17 7.5 15
-8 -16 8 16
-7.5 -15 8.5 17
-7 -14 9 18
-6.5 -13 9.5 19
-6 -12 10 20
-5.5 -11 10.5
-5 -10 11
-4.5 -9 11.5
-4 -8 12
-3.5 -7 13
-3 -6 14
-2.5 -5 15
-2 -4 16
-1.5 -3 17
-1 -2 18
-0.5 -1 19
0 0 20
0.5 1 21
1 2 22
1.5 3 23
2 4 24
2.5 5 25
3 6 26
3.5 7 27
4 8 28
4.5 9 29
5 10 30
Input Signal
End Value
DIP S1 DIP S2 DIP S1 DIP S2
8 9 10 1 2 3 V mA 8 9 10 1 2 3 V mA
10 20 5.5 11
-10 -20 6 12
-9.5 -19 6.5 13
-9 -18 7 14
-8.5 -17 7.5 15
-8 -16 8 16
-7.5 -15 8.5 17
-7 -14 9 18
-6.5 -13 9.5 19
-6 -12 10 20
-5.5 -11 10.5
-5 -10 11
-4.5 -9 11.5
-4 -8 12
-3.5 -7 13
-3 -6 14
-2.5 -5 15
-2 -4 16
-1.5 -3 17
-1 -2 18
-0.5 -1 19
0 0 20
0.5 1 21
1 2 22
1.5 3 23
2 4 24
2.5 5 25
3 6 26
3.5 7 27
4 8 28
4.5 9 29
5 10 30
DIP Switch S2
Output Signal
Measuring Range Underow Measuring Range Overow
Digital Output DO
Signaling
4 5 6 7 8 9 10
0 20 mA
Lower limit of output range
- 5 % *
Upper limit of output range
+ 2,5 % *
DO not active
4 20 mA
0 10 mA
+ 2,5 %
GND U
N
(switching)
2 10 mA
0 10 V
Lower limit of output range Upper limit of output range U
N
GND

(switching)
2 10 V
0 5 V
Lower limit of output range Upper limit of output range
1 5 V
*acc. to NAMUR NE 43
Default Settings
All DIP switches are in OFF position for delivery.
This is the position used to parameterize the device via FDT/DTB conguration software.
Input
Input signal Voltage
Start value 0 V
End value 10 V
Output
Output signal Current
Start value 0 mA
End value 20 mA
Measuring range underow 0 mA
Measuring range overow 20.5 mA
Digital output DO not active
857-402
3
222
JUMPFLEX
Transducers
Universal Isolation Amplifier
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
U; I
IN
U; I
POWER
5
6
1
2
3
4
7
8
OUT+
OUT-
Us+
GND 3
U+
I+
I+
I-/U-
Conguration via:
DIP Switches Push/Slide Switch
Short description:
The universal 857-402 Isolation Amplifier converts unipolar and bipolar standard signals
and amplifies, filters and electrically isolates analog standard signals.
Characteristics:
Overload protection of current input using reversible fuse
Zero/span adjustment across the entire measuring range (slide switch)
Calibrated scale switching for all 456 signals
Standard analog unipolar and bipolar signals, input/output
Pack.
Unit
JUMPFLEX
Transducer, for DIN 35 rail 857-402 1

Universal isolation amplifier
Technical Data
Configuration:
Configuration DIP switches, push/slide switch
Input:
Input signal Voltage:
60 mV, 0 60 mV, 100 mV,
0 100 mV, 150 mV, 0 150 mV,
300 mV, 0 300 mV, 500 mV,
0 500 mV, 1 V, 0 1 V, 5 V,
0 ... 5 V, 1 ... 5 V, 10 V, 0 ... 10 V,
2 ... 10 V, 100 V, 0 100 V, 200 V,
0 200 V
Current:
0.3 mA, 0 ... 0.3 mA, 1 mA, 0 ... 1 mA,
5 mA, 0 ... 5 mA, 10 mA, 0 ... 10 mA,
2 ... 10 mA, 20 mA, 0 ... 20 mA,
4 ... 20 mA, 50 mA, 0 ... 50 mA,
100 mA, 0 ... 100 mA
Input resistance approx. 1 M (U input)
5 mA approx. 100 ;
> 5 mA approx. 10 (I input)
Output:
Output signal Voltage:
5 V, 0 ... 5 V, 1 ... 5 V,
10 V, 0 ... 10 V, 2 ... 10 V
Current:
10 mA, 0 ... 10 mA, 2 ... 10 mA,
20 mA, 0 ... 20 mA, 4 ... 20 mA
1 k (U output)
Technical Data
Voltage supply V
N
24 V DC
Response time (T
10-90
) < 3.5 ms / < 100 s
Zero/span adjustment Adjustable via push/slide switch
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 54.3 g
r UL 508
r ANSI/ISA 12.12.01 (pending)
3
223
3
= ON 857--402 DIP Switch Adjustability
DIP Switch S2
Output Signal Ranges Reserve Clipping Rocker Switch Lock
1 2 3 4 5 6 7 8
Default setting*
inactive
(analog response)
switched o
0 10 V
active
(limiting response)
switched on
10 V
2 10 V
0 5 V
5 V
1 5 V
0 20 mA
20 mA
4 20 mA
0 10 mA
10 mA
2 10 mA
DIP Switch S1
Input Signal Ranges Zero/Span Adjustment
Max. Operating
Frequency
1 2 3 4 5 6 7 8
Default setting* Inactive < 100 Hz
0 60 mV Active 5 kHz
60 mV
0 100 mV
100 mV
0 150 mV
150 mV
0 300 mV
300 mV
0 500 mV
500 mV
0 1 V
1 V
0 5 V
5 V
0 10 V
10 V
0 ... 50 V
50 V
0 100 V
100 V
0 200 V
200 V
DIP Switch S1
Input Signal Ranges
1 2 3 4 5 6
0 0.3 mA
0.3 mA
0 1 mA
1 mA
0 5 mA
5mA
0 10 mA
10 mA
0 20 mA
20 mA
0 50 mA
50 mA
0 100 mA
100 mA
1 5 V
2 10 V
2 10 mA
4 20 mA
*Default setting
Input 10 V
Output 10 V
Max. operating frequency > 5 kHz
* The input and output range DIP switches must be readjusted when changing the default setting.
More information on measurement range setting is available in 857-402 instruction leaet.
857-409
3
224
JUMPFLEX
Transducers
Bipolar isolation amplifier
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
IN
POWER
5
6
1
2
3
4
7
8
OUT+
OUT-
Us+
GND
U+
U
I+
I
U; I
U; I
Conguration via:
DIP Switches
Short description:
The 857-409 Bipolar Isolation Amplifier converts unipolar and bipolar standard signals
and amplifies, filters and electrically isolates analog standard signals.
Characteristics:
Overload protection of current input using reversible fuse
Zero/span adjustment across the entire measuring range
Standard analog unipolar and bipolar signals, input/output
Pack.
Unit
JUMPFLEX

Bipolar isolation amplifier
Technical Data
Configuration:
Input:
Input signal Voltage:
5V, 0 - 5V, 1 - 5V,
10V, 0 - 10V, 2 - 10V
Current:
10mA, 0 - 10mA, 2 - 10mA,
20mA, 0 - 20mA, 4 - 20mA
Input resistance approx. 1M (U input) approx. 50 (I
input)
Output:
5V, 0 - 5V, 1 - 5V,
10V, 0 - 10V, 2 - 10V,
Current:
10mA, 0 - 10mA, 2 - 10mA,
20mA, 0 - 20mA, 4 - 20mA
2 k (U output)
Overload capacity 32 V / 50 mA
Residual ripple < 10mV eff
Voltage supply V
N
24 V DC
Response time (T
10-90
) < 3.5ms / < 60s
Zero/span adjustment 5 % of upper range value
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 42 g
r UL 508
3
225
3
Dip Switch S1 (4-fold) Dip Switch S2 (6-fold)
Max. Operating
Frequency
Code IN 1 2 3 4 Code OUT 1 2 3 4 5 6
a 20 mA A 20 mA 100 Hz
b 10 mA B 10 mA > 5 kHz
c 10 V C 10 V
d 5 V D 5 V
e 0 20 mA E 0 20 mA
f 4 20 mA F 4 20 mA
g 0 10 mA G 0 10 mA
h 2 10 mA H 2 10 mA
j 0 10 V J 0 10 V
k 2 10 V K 2 10 V
l 0 5 V L 0 5 V
m 1 5 V M 1 5 V
Default Settings
Input 10 V
Output 10 V
Max. Operating Frequency > 5 kHz
857-411, 857-412, 857-413, 857-414, 857-415, 857-416
3
226
JUMPFLEX
Transducers
Isolation amplifiers, fixed setting for voltage or current signals
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT IN
POWER
5
6
1
2
3
4
7
8
OUT+
GND 2
Us+
GND 3
IN+
GND 1
Us+
GND 3
Short description:
The pre-configured isolation amplifiers convert, amplify, filter and electrically
isolate standard analog signals.
Characteristics:
Input/Output: current/voltage signal
Description Input signal Output signal Item No.
Pack.
Unit
JUMPFLEX
Transducer, for DIN 35 rail

Isolation amplifier 0(4) ... 20 mA 0(4) ... 20 mA 857-411 1
Isolation amplifier 0(2) ... 10 V 0(2) ... 10 V 857-412 1
Isolation amplifier 0 ... 10 V 0 ... 20 mA 857-413 1
Isolation amplifier 0 ... 10 V 4 ... 20 mA 857-414 1
Isolation amplifier 0 ... 20 mA 0 ... 10 V 857-415 1
Isolation amplifier 4 ... 20 mA 0 ... 10 V 857-416 1
Technical Data
Input:
Input signal 857-411: 0(4) ... 20 mA
857-412: 0(2) ... 10 V
857-413: 0 ... 10 V
857-414: 0 ... 10 V
857-415: 0 ... 20 mA
857-416: 4 ... 20 mA
100 k (U input)
Output:
Output signal 857-411: 0(4) ... 20 mA
857-412: 0(2) ... 10 V
857-413: 0 ... 20 mA
857-414: 4 ... 20 mA
857-415: 0 ... 10 V
857-416: 0 ... 10 V
2 k (U output)
Voltage supply V
N
24 V DC
Response time (T
10-90
) < 3.5 ms
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 49.2 g
r UL 508
Shipbuilding g
3
227
3
857-420
3
228
JUMPFLEX
Transducers
Repeater power supply, configurable with current and voltage output
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
IN
POWER
5
6
1
2
3
4
7
8
OUT+
GND 2
Us+
GND 3
USensor+
IN
GND 1
GND 1
Conguration via:
DIP Switches
Short description:
The 857-420 Repeater Power Supply links 2- or 3-wire transmitters located in
the field. It provides the power required and transmits the analog signals in an
electrically isolated way.
Characteristics:
Power supply to SMART transmitters
Pack.
Unit
JUMPFLEX

Repeater power supply, configurable with current and voltage output
Technical Data
Configuration:
Input:
Input signal 0 ... 20 mA, 4 ... 20 mA
Input resistance 50
Max. input current 50 mA
Transmitter supply V
v
= 18 V at 30 mA
Output:
0... 5 V, 0 ... 10 V, 2 ... 10 V, 1 ... 5 V
2 k (Out = V)
Offset < 20 A / < 10 mV
Voltage supply V
N
24 V DC
Response time (T
10-90
) < 3.5 ms
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 46.7 g
r UL 508
3
229
3
Default Settings
Input 0 20 mA
Output 0 20 mA
DIP 6 n.c.
Dip Switch S1 (6-fold)
1 2 3 4 5 6
n.c. 0 20 mA 0 20 mA
n.c. 0 20 mA 4 20 mA
n.c. 0 20 mA 0 10 V
n.c. 0 20 mA 2 10 V
n.c. 0 20 mA 0 5 V
n.c. 0 20 mA 1 5 V
n.c. 4 20 mA 0 20 mA
n.c. 4 20 mA 4 20 mA
n.c. 4 20 mA 0 10 V
n.c. 4 20 mA 2 10 V
n.c. 4 20 mA 0 5 V
n.c. 4 20 mA 1 5 V
+
2
3
2
1
3
2
1
3
+
1
2
5
6
+
8
7 +
= =
=
857-420
IN OUT
POWER
24 V DC
3-wire
2-wire
Transmitter
active
Transmitter
passive
Cong
24 V DC
U/I
OUT
+Us
GND
+IN
+Us
GND
Connection assignment
857-421
3
230
JUMPFLEX
Transducers
Repeater power supply, HART
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
IN
POWER
5
6
1
2
3
4
7
8
OUT +
GND 2
Us+
GND 3
USensor+
IN
GND 1
GND 1
Short description:
The 857-421 HART Repeater Power Supply links SMART transmitters located
in the field. It provides the power required and transmits the analog signals in
an electrically isolated way.
Characteristics:
HART communication
Power supply to SMART transmitters
Pack.
Unit
JUMPFLEX

Repeater power supply, HART
Technical Data
Input:
Input signal 4 ... 20 mA
Input resistance 50
Transmitter supply V
v
= 18 V at 30 mA
Max. Eingangsstrom Max. Speisestrom
Output:
Output signal 4 ... 20 mA
Load impedance 230 - 600
Offset < 20 A
Voltage supply V
N
24 V DC
Max. operating frequency 100 Hz signal / 2.5 kHz HART
Response time (T
10-90
) < 3.5 ms signal
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 47.8 g
r UL 508
3
231
3
20
4
mA
t
857-421 Simultaneous transmission of analog and digital signals
analog signal
HART - signal (digital)
857-423
3
232
JUMPFLEX
Transducers
Signal splitter with 2 configurable current outputs
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT 1 IN
POWER
5
6
1
2
3
4
7
8
OUT 1+
GND 2
Us+
GND 3
IN+
GND 1
OUT 2+
GND 4
OUT 2
Conguration via:
DIP Switches
Short description:
The 857-423 Signal Splitter converts standard signals and amplifies, filters and
electrically isolates analog standard signals.
Characteristics:
Two configurable current outputs
Pack.
Unit
JUMPFLEX

Signal splitter with 2 configurable current outputs
Technical Data
Configuration:
Input:
Input signal 0 ... 20 mA, 4 ... 20 mA, 0... 5 V,
0 ... 10 V, 2 ... 10 V, 1 ... 5 V
Input resistance 50 (In = mA)
100 k (In = V)
Output:
Output signal 2 x 0(4) ... 20 mA
Load impedance 2 x 300
Voltage supply V
N
24 V DC
Max. operating frequency 100 Hz / 1 kHz
Response time (T
10-90
) < 3.5 ms / < 300 s
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 40.6 g
r UL 508
3
233
3
Default Settings
Input 0 20 mA
Output 1 0 20 mA
Output 2 0 20 mA
Max. Operating Frequency > 1 kHz
Dip Switch S1 (6-fold)
Input Signal
Max. Operating
Frequency
Output Signal 1 Output Signal 2
Code IN 1 2 3 4 Code OUT 5 Code OUT 6
e 0 20 mA > 1 kHz E 1 0 20 mA E 2 0 20 mA
f 4 20 mA 100 Hz F 1 4 20 mA F 2 4 20 mA
j 0 10 V
k 2 10 V
l 0 5 V
m 1 5 V
857-450
3
234
JUMPFLEX
Transducers
Loop-Powered Isolation Amplifier
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
4-20 mA
IN
U, I
N.C.
5
6
1
2
3
4
7
8
Us+
OUT 1
N.C.
N.C.
U+
U --
I+
I --
Conguration via:
DIP Switches
Short description:
The 857-450 Loop-Powered Isolation Amplifier converts analog, unipolar and bipolar,
standard signals. It is also designed to amplify, filter and electrically isolate standard
analog signals.
Characteristics:
No additional supply voltage required
Zero/span adjustment
Analog, unipolar and bipolar, standard signals at input
Safe 2-way isolation with 2.5 kV test voltage to EN 61140
Pack.
Unit
JUMPFLEX

Loop-Powered Isolation Amplifier
Technical Data
Configuration:
Input:
Input signal Current:
5 mA, 0 ... 5 mA,
10 mA, 0 ... 10 mA, 2 ... 10 mA,
20 mA, 0 ... 20 mA, 4 ... 20 mA
Voltage:
1 V, 0 1 V,
5 V, 0 ... 5 V, 1 ... 5 V,
10 V, 0 ... 10 V, 2 ... 10 V,
20 V, 2 V, 0 2 V
Input resistance approx. 1 M (U input)
approx. 50 (I input)
Output:
Output signal 4 ... 20 mA
Load impedance 600
Overload capacity 30 V / 50 mA
Supply voltage 8 ... 30 V, power is derived from the output
circuit
Max. operating frequency 100 Hz / 30 Hz
Response time (T
10-90
) 3.5 ms
Zero/span adjustment 5 % of upper range value
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 12
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 5 g
r UL 508
3
235
3
_
+
_
+
4 ... 20 mA
4 ... 20 mA
8 ... 30 V
8 ... 30 V
DIP switch (6 positions)
Max. Operating
Frequency
1 2 3 4 5 6
4 ... 20 mA
C
u
r
r
e
n
t
4 ... 20 mA
100 Hz
0 ... 20 mA 30 Hz
20 mA
2 10 mA
0 ... 10 mA
10 mA
0 ... 5 mA
5 mA
0 ... 20 V
V
o
l
t
a
g
e
20 V
2 ... 10 V
0 ... 10 V
10 V
1 ... 5 V
0 ... 5 V
5 V
0 ... 2 V
2 V
0 ... 1 V
1 V
Default setting
Input 4 ... 20 mA
Output 4 ... 20 mA
Wiring Material
e.g. 0 ... 10 V
e.g. 0 ... 10 mA
e.g. 787-1002
PLC
Input card, passive
R
Load impedance
PLC
Input card, active
R
Load impedance
230 V AC
857-451
3
236
JUMPFLEX
Transducers
Passive isolator, 1 channel, 2 channels
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT IN
5
6
1
2
3
4
7
8
OUT+
GND 2
N.C.
N.C.
IN+
GND 1
N.C.
N.C.
Short description:
The 1- and 2-channel passive isolators filter and electrically isolate 0(4) - 20mA
analog standard signals.
Characteristics:
Pack.
Unit
JUMPFLEX

Passive isolator, 1 channel
Technical Data
Input:
Input signal 0(4) ... 20 mA
Max. input signal 40 mA
Voltage drop intput < 2.0 V at 20 mA (output)
Responce current 100 A
Output:
Output signal 0(4) ... 20 mA
Load impedance 600
Response time (T
10-90
) < 3.5 ms
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 33.8 g
r UL 508
Shipbuilding g
857-452
3
237
3
JUMPFLEX
Transducers
Passive isolator, 1 channel, 2 channels
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT 1 IN 1
5
6
1
2
3
4
7
8
OUT 1+
GND 2
OUT 2+
GND 4
IN 1+
GND 1
IN 2+
GND 3
OUT 2 IN 2
Short description:
The 1- and 2-channel passive isolators filter and electrically isolate 0(4) - 20mA
analog standard signals.
Characteristics:
Pack.
Unit
JUMPFLEX

Passive isolator, 2 channels
Technical Data
Input:
Input signal 2 x 0(4) ... 20 mA
Max. input signal 40 mA
Voltage drop intput < 2.0 V at 20 mA (output)
Responce current 100 A
Output:
Output signal 2 x 0(4) ... 20 mA
Load impedance 600
Response time (T
10-90
) < 3.5 ms
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 37.8 g
r UL 508
Shipbuilding g
857-800
3
238
JUMPFLEX
Transducers
Temperature transducer for Pt 00, Pt200, Pt500 and Pt1000 as well as resistors 0 ... 1 k; 0 ... 4.5 k
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
IN
5
6
1
2
3
4
7
8
OUT+
GND 1
Us+
GND 2
POWER
Conguration via:
DIP Switches
Short description:
The 857-800 Temperature Transducer records Pt100, Pt200, Pt500 and Pt1000 sensors,
as well as resistors up to 4.5 kOhm, converting the temperature signal into a standard
analog signal on the output side.
Characteristics:
For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm
2-, 3-, and 4-wire connection technology
Sensor's wire break/short circuit
Measuring range underflow/overflow
Clipping capability allows analog standard signal limitation to upper range values
Pack.
Unit
JUMPFLEX

Temperature transducer for Pt 100, Pt 200, Pt 500 und Pt 1000
as well as resistors 0 ... 1 k; 0 ... 4.5 k
Technical Data
Configuration:
Input:
Input signal PT sensors and resistors
Sensor types Pt100, Pt200, Pt500, Pt1000
Sensor connection 2-wire, 3-wire, 4-wire (switchable)
Temperature range -200 C ... +850 C
Sensorspeisestrom < 0.5 mA
Resistor input 0 ... 1 k , 0 ... 4.5 k
Output:
0 ... 10 V, 2 ... 10 V,
0... 5 V, 1 ... 5 V,
0 ... 10 mA, 2 ... 10 mA
2 k (Out = V)
Step response 180 ms (360 ms at 3-wire)
Voltage supply V
N
24 V DC
Current consumption at 24 V DC < 40 mA
Min. measuring span 50 K (50 )
Transmission error 0.1 % at max. measuring span
Transmission error of set
measuring span ((10 K / set measuring span [K]) + 0.1) %
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 42 g
r UL 508
Shipbuilding g
3
239
3
DIP Switch S2
Start temperature End temperature
1 2 3 4 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F
75 167 210 410 475 887
-200 -328 0 32 80 176 220 428 500 932
-175 -283 5 41 85 185 230 446 525 997
-150 -238 10 50 90 194 240 464 550 1022
-125 -193 15 59 95 203 250 482 575 1067
-100 -148 20 68 100 212 260 500 600 1022
-90 -130 25 77 110 230 270 518 625 1112
-80 -112 30 86 120 248 280 536 650 1202
-70 -94 35 95 130 266 290 554 675 1247
-60 -76 40 104 140 284 300 572 700 1292
-50 -58 45 113 150 302 325 617 725 1337
-40 -40 50 122 160 320 350 662 750 1382
-30 -22 55 131 170 338 375 707 775 1427
-20 -4 60 140 180 356 400 752 800 1472
-10 14 65 149 190 374 425 797 825 1517
0 32 70 158 200 392 450 842 850 1562
The minimum distance from the start temperature to the end temperature may not fall short of 50K degrees on the Celsius (C) scale or 122K degrees on the Fahrenheit (F) scale.
DIP Switch S1
Wire connection Sensor type Output signal
Measuring range
underow
Measuring range
overow
Wire break Short circuit
1 2 3 4 5 6 7 8 9 10
2-wire Pt100 0 20 mA
- 5 % *
+ 2,5 % *
+ 5 % *
- 12,5 % *
+ 2,5 %
+ 5 %
Pt1000 2 10 mA
1 k 0 10 V
+ 5 %
+ 5 %
4.5 k 2 10 V
0 5 V
Lower limit of output range Upper limit of output range Lower limit of output range Lower limit of output range
1 5 V
* acc. to NAMUR NE 43
Default Settings
Sensor connection 2-wire
Sensor type Pt 100
Start temperature 0 C
End temperature 100 C
Output signal 0 20 mA
Wire break 21 mA
Short circuit 0 mA
857-801
3
240
JUMPFLEX
Transducers
Temperature transducer for Pt100, Pt200, Pt500 and Pt1000 * as well as resistors 0 ... 1 k; 0 ... 4.5 k
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
IN
5
6
1
2
3
4
7
8
OUT+
GND 1
Us+
GND 2
POWER
Conguration via:
Software
Short description:
The 857-801 Temperature Transducer records Pt100, Pt200, Pt500 and Pt1000 sensors, as well
as resistors up to 4.5 kOhm, converting the temperature signal into a standard analog signal on
the output side..
Characteristics::
For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm
2-, 3-, and 4-wire connection technology
Sensor's wire break/short circuit
Pack.
Unit
JUMPFLEX

Temperature transducer for Pt 100, Pt 200, Pt 500 und Pt 1000 *
as well as resistors 0 ... 1 k; 0 ... 4.5 k
Technical Data
Configuration:
Input:
Input signal PT sensors and resistors
Sensor types Pt100, Pt200, Pt500, Pt1000 *
Temperature range -200 C ... +850 C
Sensorspeisestrom < 0.5 mA
Resistor input 0 ... 1 k , 0 ... 4.5 k
Output:
0 ... 10 V, 2 ... 10 V,
0... 5 V, 1 ... 5 V,
0 ... 10 mA, 2 ... 10 mA
2 k (Out = V)
Step response 180 ms (360 ms at 3-wire)
Voltage supply V
N
24 V DC
Current consumption at 24 V DC < 40 mA
Min. measuring span 50 K (50 )
Transmission error 0.1 % at max. measuring span
measuring span ((10 K / set measuring span [K]) + 0.1) %
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 49.2 g
r UL 508
Shipbuilding g
( * Setting of other types of sensors as well as output signal inversion using the
configuration software)
3
241
3
= ON 857-801
DIP Switch S2
1 2 3 4 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F
75 167 210 410 475 887
-200 -328 0 32 80 176 220 428 500 932
-175 -283 5 41 85 185 230 446 525 997
-150 -238 10 50 90 194 240 464 550 1022
-125 -193 15 59 95 203 250 482 575 1067
-100 -148 20 68 100 212 260 500 600 1022
-90 -130 25 77 110 230 270 518 625 1112
-80 -112 30 86 120 248 280 536 650 1202
-70 -94 35 95 130 266 290 554 675 1247
-60 -76 40 104 140 284 300 572 700 1292
-50 -58 45 113 150 302 325 617 725 1337
-40 -40 50 122 160 320 350 662 750 1382
-30 -22 55 131 170 338 375 707 775 1427
-20 -4 60 140 180 356 400 752 800 1472
-10 14 65 149 190 374 425 797 825 1517
0 32 70 158 200 392 450 842 850 1562
Default Settings
Sensor connection 2-wire
Sensor type Pt 100
Wire break 21 mA
Short circuit 0 mA
DIP Switch S1
Wire connection Sensor type Output signal
Measuring range
underow
Measuring range
overow
Wire break Short circuit
1 2 3 4 5 6 7 8 9 10
- 5 % *
+ 2,5 % *
+ 5 % *
- 12,5 % *
+ 2,5 %
+ 5 %
Pt1000 2 10 mA
1 k 0 10 V
+ 5 %
+ 5 %
4.5 k 2 10 V
0 5 V
1 5 V
* acc. to NAMUR NE 43
857-810
3
242
JUMPFLEX
Transducers
Temperature transducer for thermocouples of types J and K
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
IN
POWER
5
6
1
2
3
4
7
8
OUT+
GND 1
Us+
GND 2
TC+
TC
Conguration via:
DIP Switches
Short description:
The 857-810 Thermocouple Temperature Transducer is suitable for the connection of type
J and K thermocouples. On the output side, the thermocouple temperature transducer
converts the temperature signal into an analog standard signal.
Characteristics:
For thermocouples of type J and K
Cold junction compensation (on/off)
Sensor's wire break
Pack.
Unit
JUMPFLEX

Temperature transducer for thermocouples of types J and K
Technical Data
Configuration:
Input:
Input signal Thermocouples
Sensor types Thermocouples of types J and K
Temperature range Type J: -150 C ... +1200 C
Type K: -150 C ... +1350 C
Output:
0 ... 10 V, 2 ... 10 V,
0... 5 V, 1 ... 5 V,
0 ... 10 mA, 2 ... 10 mA
2 k (Out = V)
Cold junction compensation on / off (default: on)
Cold junction error 3 K (typ. 2 K )
Step response 60 ms without cold junction compensation/
120 ms with cold junction compensation
Voltage supply V
N
24 V DC
Min. measuring span 100 K (configurable)
Transmission error 0.1 % at max. measuring span (Typ J, K)
measuring span (150 K / set measuring span [K]) %
Technical Data
S
0.08 mm ... 2.5 mm / AWG 24 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 44.7 g
r UL 508
Shipbuilding g
3
243
3
Default Settings
Cold junction compensation on
Thermocouple Type J
Wire break 21 mA
DIP Switch S1
Cold junction compensation Sensor type Output signal
Measuring range
underow
Measuring range
overow
Wire break
1 2 3 Code OUT 4 5 6 7 8
on J E 0 20 mA
- 5 % *
+ 2,5 % *
+ 5 % *
o K F 4 20 mA
G 0 10 mA
+ 2,5 %
+ 5 %
H 2 10 mA
J 0 10 V
+ 5 %
K 2 10 V
L 0 5 V
Lower limit of output range Upper limit of output range Lower limit of output range
M 1 5 V
DIP 9 and 10 n.c. * acc. to NAMUR NE 43
DIP Switch S2
1 2 3 4 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F
225 437 625 1157 1025 1877
-200 -328 0 32 250 482 650 1202 1050 1922
-175 -283 10 50 275 527 675 1247 1075 1967
-150 -283 20 68 300 572 700 1292 1100 2012
-125 -193 30 86 325 617 725 1337 1125 2057
-100 -148 40 104 350 662 750 1382 1150 2102
-90 -130 50 122 375 707 775 1427 1175 2147
-80 -112 60 140 400 752 800 1472 1200 2192
-70 -94 70 158 425 797 825 1517 1225 2237
-60 -76 80 176 450 842 850 1562 1250 2282
-50 -58 90 194 475 887 875 1607 1275 2327
-40 -40 100 212 500 932 900 1652 1300 2372
-30 -22 125 257 525 977 925 1697 1325 2417
-20 -4 150 302 550 1022 950 1742 1350 2462
-10 14 175 347 575 1067 975 1787 1375 2507
0 32 200 392 600 1112 1000 1832 1400 2552
857-811
3
244
JUMPFLEX
Transducers
Temperature transducer for thermocouples of types J and K *
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT 1
IN
POWER
5
6
1
2
3
4
7
8
OUT+
GND 1
Us+
GND 2
TC+
TC
Conguration via:
Software
Short description:
The 857-811 Thermocouple Temperature Transducer is suitable for the connection of type J and
K thermocouples. On the output side, the thermocouple temperature transducer converts the
temperature signal into an analog standard signal.
Characteristics:
For thermocouples of type J and K (E, R, N, S, T, B, C)
Cold junction compensation (on/off)
Sensor's wire break
Pack.
Unit
JUMPFLEX

Temperature transducer for thermocouples of types J and K *
Technical Data
Configuration:
Input:
Input signal Thermocouples
Sensor types Thermocouples of types J and K *
Temperature range Type J: -150 C ... +1200 C
Type K: -150 C ... +1350 C
Output:
0 ... 10 V, 2 ... 10 V,
0... 5 V, 1 ... 5 V,
0 ... 10 mA, 2 ... 10 mA
2 k (Out = V)
Cold junction compensation on / off (default: on)
Cold junction error 3 K (typ. 2 K )
Step response 60 ms without cold junction compensation/
120 ms with cold junction compensation
Voltage supply V
N
24 V DC
Min. measuring span 100 K (configurable)
Transmission error 0.1 % at max. measuring span (Typ J, K)
measuring span (150 K / set measuring span [K]) %
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 49.2 g
r UL 508
Shipbuilding g
( * Setting of other types of sensors as well as output signal inversion using the
configuration software)
3
245
3
= ON 857-811
Default Settings
Cold junction compensation on
Thermocouple Type J
Wire break 21 mA
DIP Switch S2
1 2 3 4 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F 5 6 7 8 9 10 C F
225 437 625 1157 1025 1877
-200 -328 0 32 250 482 650 1202 1050 1922
-175 -283 10 50 275 527 675 1247 1075 1967
-150 -283 20 68 300 572 700 1292 1100 2012
-125 -193 30 86 325 617 725 1337 1125 2057
-100 -148 40 104 350 662 750 1382 1150 2102
-90 -130 50 122 375 707 775 1427 1175 2147
-80 -112 60 140 400 752 800 1472 1200 2192
-70 -94 70 158 425 797 825 1517 1225 2237
-60 -76 80 176 450 842 850 1562 1250 2282
-50 -58 90 194 475 887 875 1607 1275 2327
-40 -40 100 212 500 932 900 1652 1300 2372
-30 -22 125 257 525 977 925 1697 1325 2417
-20 -4 150 302 550 1022 950 1742 1350 2462
-10 14 175 347 575 1067 975 1787 1375 2507
0 32 200 392 600 1112 1000 1832 1400 2552
DIP Switch S1
Cold junction compensation Sensor type Output signal
Measuring range
underow
Measuring range
overow
Wire break
1 2 3 Code OUT 4 5 6 7 8
on J E 0 20 mA
- 5 % *
+ 2,5 % *
+ 5 % *
o K F 4 20 mA
G 0 10 mA
+ 2,5 %
+ 5 %
H 2 10 mA
J 0 10 V
+ 5 %
K 2 10 V
L 0 5 V
Lower limit of output range Upper limit of output range Lower limit of output range
M 1 5 V
DIP 9 and 10 n.c. * acc. to NAMUR NE 43
857-818
3
246
JUMPFLEX
Transducers
Ni Transducer for Ni 100, Ni 120, Ni 200, Ni 500, Ni 1000
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
IN
5
6
1
2
3
4
7
8
OUT+
GND 1
Us+
GND 2
POWER
Conguration via:
DIP Switches
Short description:
The 857-818 Ni Transducer (Ni = nickel) records signals from Ni sensors
featuring all standard characteristics. On the output side, the NI temperature
transducer converts the temperature signal into a standard analog signal.
Characteristics:
For Ni100, Ni120, Ni200, Ni500 and Ni1000 sensors
Clipping capability allows analog standard signal limitation to upper range
values
Pack.
Unit
JUMPFLEX

Ni transducer for Ni100, Ni120, Ni200, Ni500, Ni1000
with temperature coefficients: 6178 ppm/K (DIN 43760)
5000 ppm/K; 6720 ppm/K; 6370 ppm/K
Technical Data
Configuration:
Input:
Input signal Ni sensors
Max. input signal 31.2 V DC
Sensor types Ni 100, Ni 120, Ni 200, Ni 500,
Ni 1000
Output:
0 ... 20 mA, 4 ... 20 mA,
0... 5 V, 1 ... 5 V,
0 ... 10 V, 2 ... 10 V
2 k (U output)
Step response < 60 ms at 2- and 4-conductor
measurement
< 120 ms at 3-conductor measurement
Voltage supply V
N
24 V DC
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 50 g
r UL 508
3
247
3
DIP Switch S1
Start Temperature End Temperature
8 9 10 C 1 2 3 4 5 T / C 1 2 3 4 5 T / C 1 2 3 4 5 T / C
-60 0 100 200
-50 10 110 210
-40 20 120 220
-30 30 130 230
-20 40 140 240
-10 50 150 250
0 60 160 260
70 170 270
80 180 280
90 190 290
300
DIP Switch S1
Connection Technology Temperature Coe cient Sensor Type
1 2 3 4 5 6 7
2-conductor 6178 ppm/K Ni 100
Reserve Ni 500
Ni 1000
DIP Switch S2
Output Signal
Measuring Range
Underow
Measuring Range
Overow
Wire Break Short Circuit
6 7 8 Code OUT 9 10
0 20 mA E
-5 % **
2
+2.5 %*
2
5 %*
2
-12.5 % **
2
4 20 mA F
0 10 mA G
+2.5 %
5 %
2 10 mA H
0 10 V J
Upper limit of output
range
5 %
5 %
2 10 V K
0 5 V L
range
Lower limit of output range Lower limit of output range
1 5 V M
* but not when lower limit of output range = 0V or 0mA
*
2
acc. to NAMUR NE 43
Default Setting
Sensor connection 2-conductor
Sensor type NI 100
Temperature coe cient 6178 ppm/K
Wire break 21 mA
Short circuit 0 mA
857-819
3
248
JUMPFLEX
Transducers
Millivolt transducer; Records all mV signals ranging from -100 mV to +100 mV; 0 mV ... 1000 mV. Application: Recording of lambda probes
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
U,I
IN
mV
POWER
5
6
1
2
3
4
7
8
OUT+
GND 1
Us+
GND 2
IN+
IN
N.C.
N.C.
Conguration via:
Software
Short description:
The 857-819 Millivolt Transducer converts input millivolt signals into an analog
standard signal on the output side.
Characteristics:
values
Pack.
Unit
JUMPFLEX

Millivolt transducer, with millivolt input as well as current and voltage output
Technical Data
Configuration:
Input:
Input signal -100 mV ... +100 mV,
0 mV ... 200 mV, 0 mV ... 1000 mV
(in 100 mV increments)
Input resistance > 1M
Max. input signal 31.2V
Output:
Output signal 0 - 10mA, 2 - 10mA,
0 - 20mA, 4 - 20mA,
0 - 5V, 1 - 5V,
0 - 10V, 2 - 10V
2 k (U output)
Step response 50ms
Voltage supply V
N
24 V DC
Min. measuring span 10 mV (configurable)
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 50 g
r UL 508
Shipbuilding g
3
249
3
= ON 857-819
Input
Start value
DIP S1
1 2 3 4 5 6 7 mV 1 2 3 4 5 6 7 mV 1 2 3 4 5 6 7 mV
-34 34
-100 -32 36
-98 -30 38
-96 -28 40
-94 -26 42
-92 -24 44
-90 -22 46
-88 -20 48
-86 -18 50
-84 -16 52
-82 -14 54
-80 -12 56
-78 -10 58
-76 -8 60
-74 -6 62
-72 -4 64
-70 -2 66
-68 0 68
-66 2 70
-64 4 72
-62 6 74
-60 8 76
-58 10 78
-56 12 80
-54 14 82
-52 16 84
-50 18 86
-48 20 88
-46 22 90
-44 24 92
-42 26 94
-40 28 96
-38 30 98
-36 32 100
Input
End value
DIP S1 DIP S2 DIP S1 DIP S2 DIP S1 DIP S2 DIP S1 DIP S2
8 9 10 1 2 3 4 mV 8 9 10 1 2 3 4 mV 8 9 10 1 2 3 4 mV 8 9 10 1 2 3 4 mV
-34 34 100
-100 -32 36 200
-98 -30 38 300
-96 -28 40 400
-94 -26 42 500
-92 -24 44 600
-90 -22 46 700
-88 -20 48 800
-86 -18 50 900
-84 -16 52 1000
-82 -14 54
-80 -12 56
-78 -10 58
-76 -8 60
-74 -6 62
-72 -4 64
-70 -2 66
-68 0 68
-66 2 70
-64 4 72
-62 6 74
-60 8 76
-58 10 78
-56 12 80
-54 14 82
-52 16 84
-50 18 86
-48 20 88
-46 22 90
-44 24 92
-42 26 94
-40 28 96
-38 30 98
-36 32 100
DIP Switch S2
Output signal
Code OUT 6 7 8 9 10
E 0 20 mA Lower limit of output range - 5 % * Upper limit of output range + 2,5 % *
F 4 20 mA (0 mA / 1,9 mA / 3,8 mA / 0 V / 0,95 V / 1,9 V) (10,25 mA / 20,5 mA / 5,125 V / 10,25 V)
G 0 10 mA
Lower limit of output range Upper limit of output range + 2,5 %

H 2 10 mA (0 mA / 2 mA / 4 mA / 0 V / 1 V / 2 V) (10,25 mA / 20,5 mA / 5,125 V / 10,25 V)
J 0 10 V

K 2 10 V (0 mA / 2 mA / 4 mA / 0 V / 1 V / 2 V) (10 mA / 20 mA / 5 V / 10 V)
L 0 5 V

M 1 5 V (0 mA / 2 mA / 4 mA / 0 V / 1 V / 2 V) (10 mA / 20 mA / 5 V / 10 V)
*acc. to NAMUR NE 43
Default Settings
This is the position used to parameterize the device
via FDT/DTB conguration software.
Input signal 0 100 mV
857-820
3
250
JUMPFLEX
Transducers
KTY Transducer
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
U; I
POWER DO
KTY
5
6
1
2
3
4
7
8
OUT+
GND 1
Us+
GND 2
IN+
IN-
DO
GND 2
Conguration via:
DIP Switches
Short description:
The 857-820 KTY Transducer records signals from KTY sensors featuring all
standard characteristics. On the output side, the KTY temperature transducer
converts the temperature signal into a standard analog signal.
Characteristics:
Supports all standard KTY sensors
values
Pack.
Unit
JUMPFLEX

KTY Transducer
Technical Data
Configuration:
Input:
Input signal KTY sensors
Max. input signal 30 V DC
Sensor types KTY81-110, KTY81-120, KTY81-150
KTY82-110, KTY82-120, KTY82-150,
KTY81-121, KTY82-121, KTY81-122,
KTY82-122, KTY81-210, KTY81-220,
KTY82-210, KTY82-220, KTY81-221,
KTY82-221, KTY81-222, KTY82-222,
KTY81-250, KTY82-250, KTY83-110,
KTY83-120, KTY83-150, KTY83-121,
KTY83-122, KTY83-151, KTY84-130,
KTY84-150, KTY84-151, KTY16, KTY19,
ST13, ST20
Sensor connection 2-conductor
Output:
0 ... 20 mA, 4 ... 20 mA,
0... 5 V, 1 ... 5 V,
0 ... 10 V, 2 ... 10 V
2 k (U output)
Step response < 50 ms
Output - Digital
100 mA (60 C ... 70 C)
Technical Data
Voltage supply V
N
24 V DC
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 50 g
r UL 508
3
251
3
DIP Switch S1
Sensor Type
1 2 3 4
KTY81-110, KTY81-120, KTY82-110, KTY82-120
KTY81-121, KTY82-121
KTY81-122, KTY82-122
KTY81-150, KTY82-150
KTY81-210, KTY81-220, KTY82-210, KTY82-220
KTY81-221, KTY82-221
KTY81-222, KTY82-222
KTY81-250, KTY82-250
KTY83-110, KTY83-120,
KTY83-121
KTY83-122
KTY83-150
KTY83-151
KTY84-130, KTY84-150
KTY84-151
KTY16, KTY19, ST13, ST20
DIP Switch S1
Output Signal
Measuring Range
Underow
Measuring Range
Overow
Wire Break Short Circuit
6 7 8 Code OUT 9 10
0 20 mA E
-5 % **
2
+2.5 %*
2
5 %*
2
-12.5 % **
2
4 20 mA F
0 10 mA G
+2.5 %
5 %
2 10 mA H
0 10 V J
range
5 %
5 %
2 10 V K
0 5 V L
range
Lower limit of output range Lower limit of output range
1 5 V M
* but not when lower limit of output range = 0V or 0mA
*
2
acc. to NAMUR NE 43
Default Setting
Sensor type KTY81-110, KTY81-120, KTY82-110, KTY82-120
Wire break 21 mA
Short circuit 0 mA
Digital output not active
DIP Switch S2
Digit Output DO Signaling
9 10
DO not active
DO Us+ switching
DO GND switching
DIP Switch S2
Start Temperature End Temperature
1 2 3 C 4 5 6 7 8 C 4 5 6 7 8 C 4 5 6 7 8 C
-55 0 100 200
-50 10 110 210
-40 20 120 220
-30 30 130 230
-20 40 140 240
-10 50 150 250
0 60 160 260
70 170 270
80 180 280
90 190 290
300
857-809
3
252
JUMPFLEX
Transducers
Potentiometer Position Transducer
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
1 0%
100%
2
3
4 DO
5
6
7
8
OUT
OUT+
GND 1
Us+
GND 2 DO (GND 2)
POWER
IN
Conguration via:
DIP Switches Push/Slide Switch
Short description:
The 857-809 Potentiometer Position Transducer records resistance signals (e.g.,
from potentiometers), converting them into an analog standard signal. The de-
vice is supplied with 24VDC (nominal voltage). Configuration is performed via
DIP switches.
Pack.
Unit
JUMPFLEX

Potentiometer Position Transducer
Technical Data
Configuration:
Configuration DIP switches, push/slide switch
Input:
Input signal Potentiometer und Widerstnde
Input range
Potentiometer 100 100 k
Resistors 10 100 k
Min. measuring range 100
Output:
0 10 V, 2 10 V, 0 5 V, 1 5 V
Current:
0 20 mA, 4 20 mA,
0 10 mA, 2 10 mA
2 k (U output)
Step response < 32 ms
Output - Digital
Max. continuous current 100 mA
Voltage supply V
N
24 V DC
Operational indication LED, output behavior, DO
Technical Data
S
0.08 mm 2.5 mm / AWG 28 14
fine-stranded:
0.34 mm 2.5 mm / AWG 22 14
Strip lengths 9 10 mm / 0.37 in
Weight 49.2 g
r UL 508 (pending)
3
253
3
Start Value
DIP S1 Resistor
2 3 4 5 6
0
*
0
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
40
50
60
70
80
90
End Value
DIP S1 DIP S2 Resistor
7 8 9 10 1
100000
*
0
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
40
50
60
70
80
90
Factor of Initial Value Factor of End Value Output Output Signal Range
2 3 4 5 6 7 8
x1
*
x1
*
Current* 0 10 V/0 20 mA
*
x10 x10 Voltage 2 10 V/4 20 mA
x100 x100 0 5 V/0 10 mA
x1000 x1000 1 5 V/2 10 mA
DIP Switch S2
9 10 Measuring Range Underow Measuring Range Overow Wire Break
*1
+2.5 %
*1
-5 %
*1
+5 %

+2.5 %
+5 %
Upper limit of output range Lower limit of output range
+5 %
Upper limit of output range Lower limit of output range Lower limit of output range
1 Input
Potentiometer
Resistor
DIP Switch S1
*
Default setting
*
Default setting
*1
acc. to NAMUR NE 45
DIP Switch S1 and S2
3
254
Out
In
max.
min.
Out
In
max.
min.
Operating push/slide switch:
The following switching thresholds (SP1 and SP2) are set via
push/slide switch. The switch is located under the front-side
transparent cover and can be operated manually.
- Press PSS down until the yellow LED is flashing
- Set potentiometer to the minimum value
- Briefly push PSS to the left
- Red LED flashes briefly
- Set potentiometer to the maximum value
- Briefly push PSS to the right
- Red LED flashes briefly
- Briefly press PSS downward
- The yellow LED stops flashing
PSS = Push/slide switch
Press for
1 sec.
Parameterization mode Exit
parameterization mode
Yellow
LED
flashes
SP1 SP2
Red
LED
flashes
briefly
No flashing
Transmission function Configuration instructions
SP 1 SP 2
press
right left
Press for
1 sec.
Parameterization mode
Yellow
LED
flashes
SP2 SP1
Red
LED
flashes
briefly
SP 1 SP 2
No flashing
Exit
No flashing
Red
LED
flashes
briefly
Press for
3 sec.
Yellow
LED
flashes
Press for
1 sec.
Press for
1 sec.
Yellow
LED
flashes
Parameterization mode
No flashing
Exit
Exit parameterization
mode without
saving value.
SP = Switching points
Delete set
switching points
Parameterization mode SP1
Exit
Push/Slide Switch Operation:
3
255
3
4...20 mA 4...2
LED indication
24 V/500 mA
e.g 787-1002
PLC/
LED indication
AC 230 V
16.8...31.2 V
Application example:
857-500
3
256
JUMPFLEX
Transducers
Frequency transducer 0.1 Hz ... 120 kHz
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

in

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT
U, I
IN
f
POWER
5
6
1
2
3
4
7
8
OUT+
GND 2
Us+
GND 3
+8,2 V(Namur)
f
IN
GND 1
NPN/PNP
Conguration via:
DIP Switches
Short description:
The 857-500 Frequency Transducer collects 0.1120kHz signals from
NAMUR, NPN or PNP sensors and converts them into analog standard signals.
Characteristics:
Signal acquisition from NAMUR, NPN or PNP sensors
Pack.
Unit
JUMPFLEX

Frequency transducer
Technical Data
Configuration:
Input:
Sensor types -Frequency generators
-NAMUR sensors
-NPN/PNP transistor outputs
without pull-up or pull-down resistor
-mech. contact (dry contact)
Technical Data
Input for frequency generators or NPN/PNP transistor outputs with pull-up or
pull-down resistor
Frequency range 0.1 Hz ... 120 kHz
Signal level 1.5 V, 10 V, 20 V (switchable)
Max. input signal DC 31.2 V
Pulse length 1 s
Signal form Any
Coupling AC/DC (AC above 10 Hz)
(adjustable)
Min. measuring span 10 Hz
Input resistance 10 k
Input for NAMUR sensors per DIN EN 50227
Sensor supply DC 8.2 V
Signal current (0) 1.2 mA
Signal current (1) 2.1 mA
Hysteresis 0.45 mA
Input resistance < 600
Pulse length 500 s
Short-circuit current 14 mA
Short-circuit monitoring > 4.7 mA
Wire break monitoring < 0.2 mA
Input for NPN/PNP transistor outputs without pull-up or pull-down resistor or
mech. contact (dry contact)
Pulse length 25 s
Open-circuit voltage 5 VDC
NPN_Residual voltage < 1.5 V
PNP Switching voltage > 7.5 V + residual voltage U
CE
sat
3
257
3
Technical Data
Output:
0 ... 5 V, 1 ... 5 V, 0 ... 10 V, 2 ... 10 V
Current:
0 ... 10 mA, 2 ... 10 mA,
0 ... 20 mA, 4 ... 20 mA
2 k (U output)
Conversion time Gate time measurement method
(> 400 Hz): < 20 ms
Pulse time measurement method
(< 400 Hz): < 200 s + T
Cycle duration
Voltage supply V
N
24 V DC
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 38.7 g
r UL 508
Refer to following pages for DIP Switch Table and Pin Assignments.
3
258
= ON 857-500
AC/DC
AC
U
t
DIP Switch Adjustability = ON
DIP Switch S1
Source Input Coupling
Operation with disturbed frequency signals for acceptable signal level
(applies only to f
IN
input)
1 2 3 4 5
Frequency generator or NPN/PNP transistor
outputs with pull-up or pull-down resistor
AC/DC High Low
NAMUR AC (without DC), see Figure 1 > 1.5 V < 0.4 V
NPN/PNP transistor outputs without pull-up or

pull-down resistor input
Dry Contact
> 10 V < 8 V
> 20 V <16 V
> 1.5 V < 0.4 V
DIP Switch S1 DIP Switch S2
Input
Start Value
Frequency/Hz
Input
End Value
Frequency/Hz
6 7 8 9 10 1 2 3 4 5
0.1 0.1
1 1
100 100
200 200
300 300
400 400
500 500
600 600
700 700
800 800
900 900
1000 1000
2000 2000
3000 3000
4000 4000
5000 5000
6000 6000
7000 7000
8000 8000
9000 9000
10000 10000
20000 20000
30000 30000
40000 40000
50000 50000
60000 60000
70000 70000
80000 80000
90000 90000
100000 100000
120000 120000
DIP Switch S2
Output Signal
Measuring Range
Underow
Measuring Range
Overow
Only for NAMUR Sensors
6 7 8 9 10 Wire Break Short Circuit
0 20 mA
Lower limit of output range*
-5 %
Upper limit of output range*
+2.5 %
Upper limit of output range*
5 %
Lower limit of output range *
-12.5 %
4 20 mA
0 10 mA
+2.5 %
5 %
2 10 mA
0 10 V
5 %
5 %
2 10 V
0 5 V
1 5 V
Default Setting
Input:
Input source Frequency generator/transistor output
with pull-up or pull-down resistor
Coupling AC/DC
Signal level > 1.5 V
Start value 100 Hz
End value 1000 Hz
Measuring technique Gate time measurement method
Output:
Output signal Current
Start value 0 mA
End value 20 mA
857-500
AC/DC
AC
U
t
Figure 1: Coupling
3
259
3
24 V
0 V
IN OUT
POWER
24 V
0 V
OUT
POWER
BN
BK
BU
+
IN
24 V
0 V
OUT
POWER
BN
BK
BU
+
IN
IN
R
R
24 V
0 V
OUT
POWER
BN
BK
BU
+
IN
24 V
0 V
OUT
POWER
BN
BK
BU
+
24 V
0 V
IN
OUT
POWER
BN
BU
24 V
0 V
IN
OUT
POWER
BN
BU
2-Conductor DC (Mechanical Contact)
857-500, Wiring Material
2-Conductor DC NAMUR Sensor
NPN Transistor Output with Pull-Up Resistor NPN Transistor Output
PNP Transistor Output PNP Transistor Output with Pull-Down Resistor
Frequency Generator
3
260
JUMPFLEX
Transducers
Threshold value switch with analog input and changeover relay output
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
IN+
GND 1
IN
U,I
Us+
GND 2
POWER
DO DO
12
11
14
1
2
3
4
5
6
7
8
Conguration via:
Software
Push/Slide Switch
Short description:
The threshold value switch for analog signals monitors analog standard signals and
reports signals exceeding a preset threshold.
Characteristics:
Digital switching output
Changeover contact relay output
Threshold value configuration via DIP switches and teach-in function via push/sli-
de switch
Pack.
Unit
JUMPFLEX

Threshold value switch with analog input,
changeover relay output and digital output
Technical Data
Configuration:
Configuration DIP switch, push/slide switch or
configuration software
Input:
Input signal -10...+10V, -20...+20mA, 0...+30V
> 100 k (U input)
Max. input signal (31.2 V (U
IN
) 100 mA (I
IN
)
Output:
Output - Relay
Contact type 1 changeover contact
Max. continuous current (terminal
blocks in a row)
max. 6 A (to 60 C),
2 A (60 to 70 C)
Anzahl der Schaltschwellen 1 bzw. 2 (adjustable)
Configurable rise and fall delay
time 0 ... 10 s (via DIP switch),
0 ... 30 s (via software) *
Output - Digital
Max. continuous current 500 mA (to 60 C)
100 mA (60 to 70 C)
Response time 16ms
Voltage supply V
N
24 V DC
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 49 g
r UL 508
Shipbuilding g
857-531
3
261
3
DIP Switch S1
Congurable rise/fall delay time in sec.
Digital output DO
Signaling
6 7 8 9 10
0 DO not active
1 GND U
N
(switching)
2 U
N
GND

(switching)
3
4
5
8
10
DIP Switch S1
Input signal limits
0.25 V; 0.5 mA
Hysteresis
Code IN 1 2 3 4 5
c 10 V 5 mV; 10 A
j 0 10 V 10 mV, 20 A
k 2 10 V
l 0 5 V
m 1 5 V
d 5 V
0 15 V
0 30 V
a 20 mA
e 0 20 mA
f 4 20 mA
g 0 10 mA
h 2 10 mA
b 10 mA
Default Settings
Input
Input range 10 V
Hysteresis 5 mV
Output
Congurable rise/fall delay time 0 s
Digital output DO not active
Push/Slide Switch Operation:
SP1 SP2
SP1 SP2
SP1 SP2
SP1
SP1
SP1 SP2
SP1 SP2
SP1 SP2
SP1 SP2
SP1 SP2
SP1
SP1
Leave param. mode without
storing a value
Param. mode
Param. mode
Param. mode
Param. mode
Param. mode
Param. mode
Param. mode
Leave
param. mode
Leave
param. mode
Leave
param. mode
Leave
param. mode
Leave
param. mode
Leave
param. mode
Leave
param. mode
Press
for
1 sec.
Yellow
LED
ashes
Red
LED
ashes
briey
No
ashing
LED
857-550
3
262
JUMPFLEX
Transducers
Current transducer AC/DC 0 ... 1 A, 0 ... 5 A
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT IN
POWER
5
6
1
2
3
4
7
8
OUT+
GND 2
Us+
GND 3
IN 1A
(GND 1)
IN 5A
(GND 1)
DO
(GND 3)
GND 1
DO
Conguration via:
DIP Switches
Short description:
The 857-550 Current Transducer measures 01A and 05A AC/DC currents and
converts the input signal to a standard analog signal at the output.
Characteristics:
True RMS measurement or arithmetic mean value
Switchable filter function
Switching between measuring ranges is calibrated
Extremely fast response times
Measuring range overflow indication
Pack.
Unit
JUMPFLEX

Current transducer
Technical Data
Configuration:
Input:
Input signal 0 ... 1 A AC/DC; 0 ... 5 A AC/DC
Input resistance 10 m (5 A); 47 m (1 A)
Frequency range 16 Hz ... 150 Hz
Output:
0 ... 5 V, 1 ... 5 V, 0 ... 10 V, 2 ... 10 V
Current:
0 ... 10 mA, 2 ... 10 mA,
0 ... 20 mA, 4 ... 20 mA
Load impedance 600 (I output)*
2 k (U output)
*Temperature range restrictions
may occur.
Filter (T
10-90
) 260 ms (DC), 600 ms (AC 50 Hz)
Output - Digital
100 mA (60 C ... 70 C)
Measuring procedure Arithmetic mean value
True RMS measurement
Response time 1.5 ms + signal cycle duration
Max. response time 60 ms
Voltage supply V
N
DC 24 V
Min. measuring span 2 mA ... 1 A; 4 mA ... 5 A
Transmission error 0.1 % typ. ( 0.2 % max.)
Technical Data
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 50 g
r UL 508
HW/SW 03/02
3
263
3
DIP Switch S1
Input Signal Measuring Method Filter Output Signal
1 2 3 4 5 6
5 A Mean square value o 0 ... 20 mA
1 A Arithmetic mean value active 4 ... 20 mA
0 ... 10 V
2 ... 10 V
0 ... 10 mA
2 ... 10 mA
0 ... 5 V
1 ... 5 V
DIP Switch S1
Overcurrent
(Input Signal - End Value + 20%)
Digit Output DO
Signaling
7 8 9 10
Lower limit of measuring range - 5 %
*
Upper limit of measuring range + 2.5 %
*
Upper limit of measuring range + 5 %
*
DO not active
Lower limit of measuring range Upper limit of measuring range + 2.5 % Upper limit of measuring range + 5 % DO Us+ switching
Lower limit of measuring range Upper limit of measuring range Lower limit of measuring range DO GND switching
Lower limit of measuring range Upper limit of measuring range Upper limit of measuring range
*
acc. to NAMUR NE 43
Default Setting
Input
Input Signal 0 ... 5 A
Measuring Method Mean square value
Output
Output Signal 0 ... 20 mA
Measuring Range Underow 0 mA
Measuring Range Overow 20.5 mA
Overcurrent 21 mA
Digital Output DO not active
Filter not active
The digital output (DO) signals error messages and can be congured as follows: 24 V 0 V/0 V 24 V.
In order to increase the switching current of the DO, the latter may be expanded by a relay. Thanks to the contour uniformity of Series 857, for example, a 857-304
Relay can be snapped in next to it. This output can be quickly and easily expanded to a switching current of 6A by simply using an adjacent jumper (859-402).
Digital Output DO/Signaling
L1
Current
transformer
250 A/ 1 A
LED indication
24 V/500 mA
PLC/
LED indication
e.g. 787-1002
16.8 ... 31.2 V
AC 230 V
857-552
3
264
JUMPFLEX
Transducers
Rogowski-Messumformer
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
OUT IN
POWER
5
6
1
2
3
4
7
8
OUT+
GND 2
Us+
GND 3
RC1+
(GND 1)
RC2+
(GND 1)
DO
(GND 3)
GND 1
DO
DIP Switches
Conguration via:
Short description:
The Rogowski transducer records RMS values from alternating currents via a Rogowski
coil, converting the input signal into a standard analog signal on the output side.
Characteristics:
Supports different types of Rogowski coils
True RMS measurement (TRMS)
Configurable output signal
Configuration via DIP switch
No current bar interruption during installation
Measuring range overflow indication
Pack.
Unit
Height from upper-edge of DIN 35 rail 857-552 1
Rogowski-Messumformer
Technical Data
Configuration:
Input:
Input signal RC1 500 A: Sensitivity 10.05 mV
RC2A 2000 A: Sensitivity 40.2 mV
RC2B: Sensitivity 100 mV
50/60 Hz sinusoidal and distorted
sinusoidal signals (e.g. leading edge and
trailing edge)
Frequency range 16 Hz ... 100 Hz
Output:
0 ... 5 V, 1 ... 5 V, 0 ... 10 V, 2 ... 10 V
Current:
0 ... 10 mA, 2 ... 10 mA,
0 ... 20 mA, 4 ... 20 mA
Overcurrent 0 % or +5 % (e. g. 10.5 V/21 mA)
Overrange / measuring range 0 % or +2.5 %
Load impedance Current 600 , Voltage 1000
Measuring procedure True RMS measurement
Filter (T
10-90
) 600 ms
Output - Digital
Max. continuous current 500 mA
Resolution 500A measuring range: 250 mA,
2000A measuring range: 1000 mA
Measuring procedure True RMS measurement
Response time 1.5 ms + signal cycle duration
Voltage supply V
N
24 V DC
Max. operating frequency < 1 kHz
Response time (T
10-90
) max. 60 ms
Technical Data
Linearity 0,1 %
Messabweichung < 1 %
Leitungslnge < 3 m (to the Rogowski coil)
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 36.2 g
r UL 508 (pending)
Rogowski coils:
RT500: 0758-0950/0000-0500
RT2000: 0758-0950/0000-2000
HW/SW 01/01
3
265
3
= ON 857-552
L1
Default Setting
Input
Input Signal RC1 500 A
Measuring Method Mean square value
Output
Output Signal 0 ... 20 mA
Measuring Range Underow 0 mA
Measuring Range Overow 20.5 mA
Overcurrent 21 mA
Digital Output DO not active
Filter not active
DIP Switch S1
DIP-Schalter S1
Overcurrent
(Input Signal - End Value + 20%)
Digit Output DO
Signaling
7 8 9 10
(+20 %) Upper limit of measuring range + 2.5 %
*
Upper limit of measuring range + 5 %
*
DO not active
Lower limit of measuring range Upper limit of measuring range + 2.5 % Upper limit of measuring range + 5 % DO Us+ switching
Lower limit of measuring range Upper limit of measuring range Lower limit of measuring range DO GND switching
Lower limit of measuring range Upper limit of measuring range Upper limit of measuring range
Input Signal RC Conguration Input Filter Output Signal
1 2 3 4 5 6
RC1 = RT500 from LEM RC2 = RT2000 from LEM o 0 ... 20 mA
RC2 RC2 = 100 mV e. => 1 kA active 4 ... 20 mA
0 ... 10 V
2 ... 10 V
0 ... 10 mA
2 ... 10 mA
0 ... 5 V
1 ... 5 V
*
acc. to NAMUR NE 43
The digital output (DO) signals error messages and can be congured as follows: 24 V 0 V/0 V 24 V.
In order to increase the switching current of the DO, the latter may be expanded by a relay. Thanks to the contour uniformity of Series 857, for example, a 857-304
Relay can be snapped in next to it. This output can be quickly and easily expanded to a switching current of 6A by simply using an adjacent jumper (859-402).
Digital Output DO/Signaling
LED indication
24 V/500 mA
PLC/
LED indication
e.g. 787-1002
16.8 ... 31.2 V
AC 230 V
857-979
3
266
JUMPFLEX
Supply and Through Module

Supply and Through Module
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<
_
_
_
_
_
_
_
_
_

9
6

m
m
/
3
.
7
6

i
n

_
_
_
_
_
_
_
_
_
>
____________
_>
_ >
5
6
1
2
3
4
7
8
Signal+
GND
Us+
GND
Signal+
GND
Us+
GND
Short description:
The 857-979 Supply and Through Module transmits electrically isolated sig-
nals (e.g., in conjunction with the 857-980 JUMPFLEX
Interface Adapter for

analog signals). When used as a supply module, it transmits the power from the
clamping points to the adjacent JUMPFLEX
modules via push-in type jumper

bars.
Pack.
Unit
JUMPFLEX
Supply and Through Module 857-979 25

Technical Data
Max. voltage 33 V AC/DC
Current carrying capacity 8 A
Contact resistance < 10 m
S
0.08 mm ... 2.5 mm / AWG 28 ... 14
fine-stranded:
0.34 mm ... 2.5 mm / AWG 22 ... 14
Weight 30 g
r UL 508
Shipbuilding g
Technical Data
3
267
3
857-979
2
1
Power supply for 8 JUMPFLEX modules with plugged interface adapter
WAGO interface adapter, 857-980
WAGO ribbon cable, 706-100/1602-200, 16-pole socket/open-ended
Push-in type jumper bar, 9-way, 859-409
759-370
3
268
WAGOframe
FDT frame application for parameterization, commissioning and diagnostics of devices with DTM device driver
WAGOframe: Parameterizing a JUMPLEX
transducer WAGOframe: Wizard function

WAGOframe is an FDT/DTM-based software used for parameterization,
commissioning and diagnostics of field devices.
DTM device drivers for the devices employed are required to use the
WAGOframe FDT frame application.
The WAGOframe FDT frame application provides a wizard, which simplifies
the operation of components, such as WAGO JUMPFLEX
DTMs.
For example, this wizard guides the user through the different operating modes
of DTM device drivers.
Depending on the PC communication interface used, an appropriate communi-
cation cable including DTM is required.
Pack.
Unit
WAGOframe 759-370 1
Pack.
Unit
857 Series JUMPFLEX
WAGO USB service cable 750-923 1

767 Series SPEEDWAY configuration
USB communication cable 756-4101/042-030 1
Technical Data
System requirements:
Operating system Windows XP (SP3 or later), Windows 7
Processor 1 GHz or higher, with 32 bits (x86) or
64 bits (x64)
RAM memory min. 1 GB RAM (recommended:
2 GB RAM or more)
Hard disk storage min. 300 Mbytes
CD-ROM required
Graphics resolution min. 1024 x 786 (recommended:
1280 x 1024 or higher)
Mouse required
Other Free interface in PC for communication
with the device (e.g., USB, Serial,
ETHERNET, ...)
Included: CD ROM with software and documentation
Additional requirements: Cable between PC communication
interface and device.
DTM software for the
communication interface used in the PC.
DTM software of the device.
Windows
is a registered trademark of Microsoft Corporation

750-923
3
269
3
WAGO USB Service Cable
The WAGO USB Service Cable connects a PC (notebook) to either the service
Interface of the 857 Series Signal Conditioners and Relay Modules
(JUMPFLEX
) or to WAGO-I/O-SYSTEM buscouplers/controllers.
Notice:
Using the WAGO 759-923 USB Service Cable in combination with some of
the programmable fieldbus controllers requires a certain firmware version or
higher:
750-841 as from firmware version 12
750-872/0020-0000 as from firmware version 2
Pack.
Unit
WAGO USB Communication Cable,
length 2.5 m 750-923 1
WAGO USB Communication Cable,
length 5 m 750-923/000-001 1
Technical Data
USB specification 2.0 compatible/full-speed device
Operating system Microsoft
Windows
2000;
Microsoft
Windows
XP Professional;
Microsoft
Windows
Vista
;
Microsoft
Windows
7
Interface USB Type A/m
Length 2.5 m (750-923)
5 m (750-923/000-001)
Connector dimensions (WxHxD) 15 x 50 x 19
Test voltage 2.5 kV, 50 Hz, 1 min.
EMC: 1 - immunity to interference acc. to EN 61000-4-3, EN 61000-4-6
EMC: 1 - emission of interference acc. to EN 55022
3
270
JUMPFLEX
8-Channel Adapter for System Wiring

WAGO-Flachbandkabel
The 16-pin cables transmit signals one-to-one from the 16-pole female connector and are
available in 1-, 2- and 3-meter lengths. Signal transmission from the 857-980 Interface
Adapter is also possible.
Interface
Adapter (Item No. 857-980)
Pack.
Unit
Pack.
Unit
8-channel adapter
Analog
857-980 1 WAGO ribbon cable 16/16, 1m long 706-753/301-100 1
WAGO ribbon cable 16/16, 2m long 706-753/301-200 1
WAGO ribbon cable 16/16, 3m long 706-753/301-300 1
acc. to DIN 41651
Ports 2 x 16-pole female connector
acc. to DIN 41651
Performance level 3 Wire cross-section 0.14 mm
2
LiYY
Contact resistance 20m Color coding acc. to DIN VDE 47100
Current carrying capacity 1A Current per channel max. 1 A
Test voltage 500 V / 50 Hz / 1 min. Operating temperature -25 C ... +70 C
Overvoltage category III Degree of protection IP20
Degree of pollution 2 Length 1 m (706-753/301-100)
2 m (706-753/301-200)
3 m (706-753/301-300)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Interface
FLK 16
3
271
3
3-way 859-403 200 (8x25)
4-way 859-404 200 (8x25)
5-way 859-405 200 (8x25)
6-way 859-406 100 (4x25)
7-way 859-407 100 (4x25)
8-way 859-408 100 (4x25)
9-way 859-409 100 (4x25)
10-way 859-410 100 (4x25)
red ... /000-005
blue ... /000-006
WMB Multi marking system Marking
Marking 1 ... 10 (10x) 793-502 5 cards
11 ... 20 (10x) 793-503 5 cards
21 ... 30 (10x) 793-504 5 cards
31 ... 40 (10x) 793-505 5 cards
41 ... 50 (10x) 793-506 5 cards
1 ... 50 (2x) 793-566 5 cards
WAGO USB
service cable Configuration
WAGO USB service cable 750-923 1
3
272
Pluggable Modules - Temperature Transducers
Input: Pt100 type RTD element
2-wire, with error output for broken wire and
short circuit of sensor
Other temperature ranges contact factory.
LED indication of broken wire or short circuit
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Marking 1, 2, 3, 0V, +UB, OUT, ERR., 0V;
Item No.: 249-622
Marking 1, 2, 0V, +UB, OUT, ERR., 0V;
Item No.: 249-623
Pack.
Unit
Output Item No.
Pack.
Unit
Temperature transducer 0 - 10 V 286-860 1 0 - 10 V 286-870 1
0 - 20 mA 286-861 1 0 - 20 mA 286-871 1
4 - 20 mA 286-862 1 4 - 20 mA 286-872 1
Temperature range 0 C ... 100 C 0 C ... 100 C
Nominal current I
BN
30 mA I
BN
30 mA
Load impedance t 2 k (Out = V)
d 500 (Out = mA)
t 2 k (Out = V)
d 500 (Out = mA)
Error output - low upon error (fail safe) V
B
/ max. 20 mA V
B
/ max. 20 mA
Transmission error (measuring range) d 0.3 % d 0.3 %
Temperature coefficient 0.02 %/K 0.02 %/K
Electromagnetic compatibility test acc. to IEC 801-2/4/5 B acc. to EN 50082 T2 (E3.94) B acc. to EN 50082 T2 (E3.94)
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
U, I
+UB
OUT
ERROR
0V
U, I
+UB
OUT
ERROR
0V
3
273
3
Input: Thermocouple J (Fe-CuNi)
with error output for broken wire
Input: Thermocouple K (NiCr-Ni)
with error output for broken wire
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Item No.: 249-622
Item No.: 249-623
Pack.
Unit
Output Item No.
Pack.
Unit
Temperature transducer 0 - 10 V 286-863 1 0 - 10 V 286-864 1
0 - 20 mA 286-865 1 0 - 20 mA 286-866 1
4 - 20 mA 286-867 1 4 - 20 mA 286-868 1
Nominal current I
BN
d 30 mA (Out = V)
I
BN
d 50 mA (Out = mA)
I
BN
d 30 mA (Out = V)
I
BN
d 50 mA (Out = mA)
d 500 (Out = mA)
t 2 k (Out = V)
d 500 (Out = mA)
Error output - low upon error (fail safe) V
B
/ max. 20 mA V
B
/ max. 20 mA
Transmission error (measuring range) d 2 % d 2 %
Temperature coefficient 0.02 %/K 0.02 %/K
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
U, I
+UB
OUT
ERROR
0V
U, I
+UB
OUT
ERROR
0V
3
274
-30 C ... +150 C
-30 C ... +150 C
Linear temperature curve
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Item No.: 249-622
Item No.: 249-623
Pack.
Unit
Output Item No.
Pack.
Unit
Temperature transducer 0 ... 10 V 286-860/150-030 1 0 ... 10 V 286-870/150-030 1
0 ... 20 mA 286-861/150-030 1 0 ... 20 mA 286-871/150-030 1
4 ... 20 mA 286-862/150-030 1 4 ... 20 mA 286-872/150-030 1
Temperature range -30 C ... 150 C -30 C ... 150 C
Nominal current I
N
30 mA I
N
30 mA
d 500 (Out = mA)
t 2 k (Out = V)
d 500 (Out = mA)
Error output (closed-current principle) V
B
/ 20 mA V
B
/ 20 mA
Transmission error (full scale) d 0.2 % d 0.2 %
Temperature coefficient d 0.02 %/K d 0.02 %/K
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
+24V
OUT
ERROR
0V
+24V
OUT
ERROR
0V
3
275
3
0 C ... +300 C
0 C ... +300 C
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Item No.: 249-622
Item No.: 249-623
Pack.
Unit
Output Item No.
Pack.
Unit
Temperature transducer 0 ... 10 V 286-860/000-300 1 0 ... 10 V 286-870/000-300 1
0 ... 20 mA 286-861/000-300 1 0 ... 20 mA 286-871/000-300 1
4 ... 20 mA 286-862/000-300 1 4 ... 20 mA 286-872/000-300 1
Nominal current I
N
30 mA I
N
30 mA
d 500 (Out = mA)
t 2 k (Out = V)
d 500 (Out = mA)
B
/ 20 mA V
B
/ 20 mA
Temperature coefficient d 0.02 %/K 0.02 %/K
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
+24V
OUT
ERROR
0V
+24V
OUT
ERROR
0V
3
276
0 C ... +100 C
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Item No.: 249-623
Pack.
Unit
Temperature transducer 0 ... 10 V 286-873 1
0 ... 20 mA 286-874 1
4 ... 20 mA 286-875 1
Temperature range 0 C ... 100 C
Operating voltage 24 V DC ( 10 %)
Nominal current I
N
30 mA
d 500 (Out = mA)
B
/ 20 mA
Transmission error (full scale) d 0.3 %
Electromagnetic compatibility test acc. to IEC 801-2/4/5 B acc. to EN 50082 T2 (E3.94)
Pack.
Unit
+24V
OUT
ERROR
0V
3
277
3
3
278
Pluggable Modules - Analog Signal Conditioning
Separate supply voltage for input/output
Isolation voltage input/output 4 kV
Input signal 0 V ... 10 V
Electrically isolated supply of input/output via
DC/DC converter Isolation voltage input/
output/supply voltage 4 kV
Input signal 0 V ... 10 V
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Description Output signal Item No.
Pack.
Unit
Output signal Item No.
Pack.
Unit
Analog signal conditioning modules, for signal
transformation, amplification and transmission with
electrical isolation of input and output of standard
signals.
0 - 10 V 786-301 1 0 - 10 V 786-321 1
0 - 20 mA 786-302 1 0 - 20 mA 786-322 1
4 - 20 mA 786-303 1 4 - 20 mA 786-323 1
Input signal 0 V ... 10 V 0 V ... 10 V
Max. input voltage 13 V 13 V
Input resistance 100 k 100 k
Load impedance t 2 k (Out = V); d 750 (Out = mA) t 2 k (Out = V); d 750 (Out = mA)
Line break detection Measuring output (LED green = off) Measuring output (LED green = off)
Error of transmission typ. d 0.1 % d 0.1 %
Temperature coefficient (full scale) d 0.02 %/K d 0.02 %/K
Critical frequency (sinus) 1 kHz 1 kHz
Isolation voltage input / output 4 kV, 50 Hz, 1 min 4 kV, 50 Hz, 1 min
Supply voltage RR d 6 % input/output 20 V ... 30 V DC 20 V ... 28 V DC
Power consumption input 8 mA ... 20 mA 60 mA
Power consumption output 15 mA ... 40 mA 60 mA
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Ambient operating temperature 0 C ... + 55 C 0 C ... + 55 C
Approvals EMC testing IEC 60801-2/4/5,
Grade B met acc. to EN 50 082 Part 2 (suppl. 3.94)
EMC testing IEC 60801-2/4/5,
Grade B met acc. to EN 50 082 Part 2 (suppl. 3.94)
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
85 mm / 3.35 in u
1
1
2

m
m

/

4
.4
1

in
U
+24V
IN+
0V
U/I
+24V
OUT+
0V
OUT-
7
5
6
8
3
4
1
2
IN-
U U/I
IN+
OUT+
0V +24V
OUT-
NC
IN-
NC
1
2
3
4
5
6
7
8
3
279
3
Input signal 0 mA ... 20 mA
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Pack.
Unit
Pack.
Unit
signals.
0 - 10 V 786-304 1 0 - 10 V 786-307 1
0 - 20 mA 786-305 1 0 - 20 mA 786-308 1
4 - 20 mA 786-306 1 4 - 20 mA 786-309 1
Input signal 0 mA ... 20 mA 4 mA ... 20 mA
Max. input current 22 mA 22 mA
Input resistance d 50 d 400
Max. voltage drop at input d 8 V
Line break detection Measuring output (LED green = off) Measuring input (LED green = off) and
Measuring output (LED green = off) (786-309)
Power consumption input 7 mA ... 18 mA 7 mA ... 18 mA
Power consumption output 9 ... 16 mA; 13 ... 35 mA; 22 ... 40 mA 25 mA; 50 mA; 50 mA
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
85 mm / 3.35 in u
1
1
2

m
m

/

4
.4
1

in
I
+24V
IN+
0V
U/I
+24V
OUT+
0V
OUT-
7
5
6
8
3
4
1
2
IN-
I
IN+
IN+
IN-
U/I
+24V
OUT+
0V
OUT-
7
5
6
8
1
4
2
3
IN-
3
280
Pluggable Modules - Analog Signal Conditioning
DC/DC converter
Isolation voltage input/output/supply voltage
4 kV
DC/DC converter
Isolation voltage input/output/supply voltage
4 kV
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Pack.
Unit
Pack.
Unit
signals.
0 - 10 V 786-324 1 0 - 10 V 786-337 1
0 - 20 mA 786-325 1 0 - 20 mA 786-338 1
4 - 20 mA 786-326 1 4 - 20 mA 786-339 1
Input signal 0 mA ... 20 mA 4 mA ... 20 mA
Max. input current 22 mA 22 mA
Input resistance d 50 d 400
Max. voltage drop at input d 8 V
Line break detection Measuring input (LED green = off) Measuring input (LED green = off) and
Measuring output (LED green = off) (786-339)
Power consumption input 70 mA; 90 mA; 95 mA 35 mA; 60 mA; 60 mA
Power consumption output 70 mA; 90 mA; 95 mA 35 mA; 60 mA; 60 mA
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
85 mm / 3.35 in u
1
1
2

m
m

/

4
.4
1

in
I
IN+
U/I
OUT+
0V +24V
OUT-
NC
IN-
NC
1
2
3
4
5
6
7
8
I U/I
IN+
OUT+
0V +24V
OUT-
NC
IN-
NC
1
2
3
4
5
6
7
8
3
281
3
WSB Marker Cards
Miniature quick marking card
Marking: K 209-782 5 cards
1 ... 10 (10 x) 209-702 5 cards
A1, A2, 13, 14 209-952 5 cards
A1, A2, 11, 12 209-953 5 cards
11, 12, 14, A1, A2, A2, 11, 12, 14 209-994 5 cards
12, A1, A2, 24, 11, 14, 21, 22 209-995 5 cards
A1, A1, A2, A2, 11, 12, 13, 14, 23, 24 209-693 5 cards
12, A1, A2, 23, 24, 11, 13, 14, 21, 22 209-691 5 cards
12, A1, A2, 23, 24, 11, 13, 14, 33, 34 209-690 5 cards
14, A1, A2, 33, 34, 13, 23, 24, 43, 44 209-692 5 cards
A1, A2, 32, 31, 34, 42, 41, 12, 11, 14, 22, 21, 24, 44 249-656 5 cards
L+, 1, L-, L-, 11, 12, 13, 14 209-954 5 cards
A1, A2, A3, 11, 12, 14 249-607 5 cards
A1, A1, A2, A2, 12, 11, 11, 14 209-996 5 cards
A1, A1, St, A2, A2, 12, 11, 11, 14 209-601 5 cards
U1, U2, U3, U4, 0V, 12, 11, 11, 14, 14 209-951 5 cards
U 209-789 5 cards
A1, A2, A2, 1, 3, 2 209-685 5 cards
A1, A2, A2, 1, 2, 2 209-686 5 cards
A1+, A1+, A2-, A2-, 1, RL1, RL2, 2 209-955 5 cards
A1+, A1+, A2-, A2-, 1+, 1+, A, 2- 249-651 5 cards
+/- 209-552 5 cards
1, 2, 3, 0V, +UB, OUT, ERR., 0V 249-622 5 cards
1, 2, 0V, +UB, OUT, ERR., 0V 249-623 5 cards
Lin, Lin, Lout, Lout, 24V, UA, UA, 0V 209-957 5 cards
Lin, Lin, Lout, 11, 14, 14, Lin, Lin, Lout 249-654 5 cards
Iin, Iin, Iout, Iout, 24V, 11, 12, 14, 0V 209-997 5 cards
S 209-682 5 cards
V 209-784 5 cards
F1 ... F10 209-787 5 cards
D 209-783 5 cards
+, -, 1, 2, 3, 13, 14, 4, 5, 6 249-608 5 cards
L, N, Quitt, Strung, Test, N, 14, 24 249-606 5 cards
A1, A2, Quitt, Strung, 12, 11, 11, 14 249-653 5 cards
Colored marker cards
Marker cards and tags WSB 4 mm/0.157 in (plain) white 209-701 5 cards
Marking software and printer/plotter see Section 8 yellow 209-701/000-002 5 cards
red 209-701/000-005 5 cards
blue 209-701/000-006 5 cards
gray 209-701/000-007 5 cards
orange 209-701/000-012 5 cards
light green 209-701/000-017 5 cards
green 209-701/000-023 5 cards
violet 209-701/000-024 5 cards
WAGO Application: Steag, Power Plant in Voerde,
Germany
WAGO Products:
WAGO-I/O-SYSTEM with MODBUS Couplers
4
282
4
4
Power Supplies
787 Series
EPSITRON Electronic Circuit Breaker 328 330
EPSITRON Electronic Circuit Breaker 331 332
787 Series
EPSITRON CLASSIC Power Supplies 310 320
787 Series
EPSITRON ECO Power Supplies 290 292
787 Series
EPSITRON Redundancy Module 336 337
EPSITRON Communication Cable, Wall Mount Adapter, Carrier Rail Adapter 338 341
288, 289 Series
Rail-Mounted Modules Constant Voltage Sources 342 343
Rail-Mounted Modules Power Supplies 344 347
Serie 787
EPSITRON PRO Power Supplies 293 309
Serie 859, 289, 288
Rail-Mounted Terminal Blocks with DC/DC Converters 348 349
Rail-Mounted Modules DC/DC Converter 350
Back-Up Capacitor Module 351
787 Series
EPSITRON UPS Charger and Controller 321 327
288, 787 Series
EPSITRON Capacitive Buffer Modules 334 335
787 Series
EPSITRON COMPACT Power Supplies 284 289
4
283
787-1001
4
284
Switched-Mode Power Supply
EPSITRON
COMPACT Power
L
N
DC+
DC+
DC -
DC -
Primary switch mode power supply unit
Prepared for class II equipment
Natural convection cooling when horizontally mounted
Stage profile, ideal for distribution boards or distribution boxes
At reduced output current, any type of mounting positions are possible (e.g.,
horizontal, overhead mounting)
Pack.
Unit
Switched-Mode Power Supply,
12 VDC / 2A
787-1001 1
Technical Data
Input:
Nominal input voltage Vi nom 100 ... 240 VAC
Input voltage range 85 ... 264 VAC; 120 ... 373 VDC
Input voltage derating < 100 VAC: Ia max. 1.5 A
Frequency 44 ... 66 Hz; 0 Hz
Input current Ii 0.6 A at 110 VAC / 0.4 A at 230 VAC
Discharge current 1mA typ.
Inrush current < 30 A, NTC
Mains failure hold-up time > 10 ms at 110 VAC /
> 80 ms at 230 VAC
Output:
Nominal output voltage Vo nom 12 VDC
Output voltage range 10.8 ... 18 VDC adjustable
Output current Io 2 A at 12 VDC
0.75 A at 18 VDC
max. 1.4 A (12 VDC) in any mounting
position
Factory preset 12 VDC
Adjustment accuracy 2 %
Residual ripple < 150 mVpp at 20 MHz
Current limitation 1.1 x Io typ.
Overload behavior Constant current
Operational indication LED green (Va)
Efficiency / power losses:
Efficiency 80 % typ.
Power loss P
V
2.6 W (230 VAC/no load),
6.0 W (230 VAC/rated load)
Max. power loss P
V
6 W typ. (100 VAC / 12 VDC, 2 A)
Fuse protection:
Internal fuse 2 AT
External fuse Circuit breakers 10 A, 16 A,
characteristic: B or C
An external DC fuse is required for the DC
input voltage
Technical Data
Rel. humidity 30 % ... 85 % (no condensation)
Derating -3 % / K (> 45 C)
Degree of pollution 2 (acc. to EN 50178)
Climatic category 3K3 (acc. to EN 60721)
Enclosure Plastic, light gray,
Flammability class V0 acc. to UL94
Test voltage pri. - sec. 4.2 kV DC
Protection class Prepared for class II equipment
Degree of protection IP20 (acc. to EN 60529)
Overvoltage protection < 30 VDC (in the event of a fault)
Short circuit protection yes
No-load proof yes
Feedback voltage max. 20 VDC
Parallel operation yes
Series connection yes
MTBF 500000 h
Wire connection Input/Output: WAGO 740 Series
Cross sections Input/Output:
0.08 ... 2.5 mm / AWG 28 ... 12
Strip lengths Input/Output:
6 ... 7 mm / 0.24 ... 0.28 in
Type of mounting DIN-rail mount (EN 60715)
Length: 55 mm, from upper-edge of DIN 35 rail
Weight 180 g
Standards/Specifications EN 60950 (SELV), EN 61204-3,
UL 60950, UL 508, GL
787-1011
4
285
4
EPSITRON
COMPACT Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
12 VDC / 4A
787-1011 1
Technical Data
Input:
> 80 ms at 230 VAC
Output:
Output voltage range 10.5 ... 15.5 VDC adjustable
max. 2.4 A in any mounting position
Power loss P
V
Max. power loss P
V
9 W typ. (100 VAC / 12 VDC, 4 A)
Fuse protection:
Internal fuse 2 AT
input voltage
Technical Data
Derating -3 % / K (> 45 C)
No-load proof yes
MTBF 500000 h
0.08 ... 2.5 mm / AWG 28 ... 12
6 ... 7 mm / 0.24 ... 0.28 in
Weight 255 g
UL 60950*, UL 508*, GL
(* pending)
787-1021
4
286
EPSITRON
COMPACT Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
12 VDC / 6.5A
787-1021 1
Technical Data
Input:
Input voltage derating max. 6 A (< 100 VAC) /
5.5 A (< 90 VAC)
> 100 ms at 230 VAC
Output:
Output current Io 6.5 A at 12 VDC
0.75 A at 18 VDC
max. 3.9 A (12 VDC) in any mounting
position
Power loss P
V
< 1 W (no load) /
15 W (rated load)
Max. power loss P
V
15 W typ. (100 VAC / 12 VDC, 6.5 A)
Fuse protection:
Internal fuse 4 AT
input voltage
Technical Data
Derating -3 % / K (> 45 C)
No-load proof yes
MTBF 500000 h
0.08 ... 2.5 mm / AWG 28 ... 12
6 ... 7 mm / 0.24 ... 0.28 in
Weight 300 g
Standards/Specifications EN 60950 (SELV), EN 61204-3, GL,
UL 60950*, UL 508*
(* pending)
787-1002
4
287
EPSITRON
COMPACT Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
24 VDC / 1.3A
787-1002 1
Technical Data
Input:
Input voltage derating < 100 VAC: Ia max. 1 A
Frequency 44 ... 66 Hz; 0H z
> 80 ms at 230 VAC
Output:
Power loss P
V
Max. power loss P
V
7.3 W typ. (100 VAC / 24 VDC, 1.3 A)
Fuse protection:
Internal fuse 2 AT
input voltage
Technical Data
Derating -3 % / K (> 45 C)
No-load proof yes
MTBF 500000 h
0.08 ... 2.5 mm / AWG 28 ... 12
6 ... 7 mm / 0.24 ... 0.28 in
Weight 180 g
UL 60950, UL 508, GL
787-1012
4
288
EPSITRON
COMPACT Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
24 VDC / 2.5A
787-1012 1
Technical Data
Input:
< 90 VAC: Ia max. 1.8 A
> 80 ms at 230 VAC
Output:
Power loss P
V
Max. power loss P
V
10.5 W typ. (100 VAC / 24 VDC, 2.5 A)
Fuse protection:
Internal fuse 2 AT
input voltage
Technical Data
Derating -3 % / K (> 45 C)
No-load proof yes
MTBF > 500000 h
0.08 ... 2.5 mm / AWG 28 ... 12
6 ... 7 mm / 0.24 ... 0.28 in
Weight 255 g
UL 60950, UL 508, GL
787-1022
4
289
4
EPSITRON
COMPACT Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
24 VDC / 4A
787-1022 1
Technical Data
Input:
Input voltage derating on request
> 100 ms at 230 VAC
Output:
Power loss P
V
Max. power loss P
V
14.8 W typ. (264 VAC / 24 VDC, 4 A)
Fuse protection:
Internal fuse 4 AT
input voltage
Technical Data
Derating -3 % / K (> 45 C)
No-load proof yes
MTBF 500000 h
0.08 ... 2.5 mm / AWG 28 ... 12
6 ... 7 mm / 0.24 ... 0.28 in
Weight 310 g
UL 60950*, UL 508*, GL
(* pending)
787-712
4
290
EPSITRON
ECO Power
L
N
3
DC+
DC+
DC
DC
prepared for class I equipment
natural convection cooling when horizontally mounted
encapsulated, for use in switchgear cabinets
Pack.
Unit
for DIN 35 rail
787-712 1
Technical Data
Input:
(use of DC requires external protection)
Frequency 47 - 63 Hz
Input current Ii 0.7 A typ. at 230 VAC;
1.2 A at 115 VAC
Discharge current < 1 mA
Inrush current < 30 A
Mains failure hold-up time > 20 ms at 230 VAC
Output:
Nominal output voltage Vo nom 24 VDC, SELV
Output voltage range 22 ... 28 VDC adjustable
Output current Io 2.5 A at 24 V DC
Residual ripple < 100 mVpp to 20 MHz
Overload behavior Constant power (in overload range:
1.15 ... 1.4 x Ia); shutdown and automatic
restart in the event of a short circuit
Operational indication LED green (24 V DC o.k.),
LED red (overload)
Power loss P
V
8.3 W (at 230 VAC and 2.5 ADC)
Max. power loss P
V
11.5 W (at 110 VAC and 2.75 ADC)
Fuse protection:
Internal fuse F 3.15 A / 250 V
External fuse C10 or B16 circuit breakers
input voltage
Transient overvoltage protection: NTC
Technical Data
Ambient operating temperature -10 C ... +70C
Rel. humidity 95 % (no condensation)
Derating -3.3 % / K (> 55 C at 230 VAC)
Test voltage pri.-sec./ pri.-gr. / sec.-gr. 3 kV AC / 1.5 kV AC / 0.5 kV AC
Protection class Prepared for class I equipment
Degree of protection IP20 acc. to EN 60529
Overvoltage protection via varistor at primary circuit
No-load proof yes
Feedback voltage 28 VDC
MTBF 480000 h (acc. IEC 61709)
(WAGO 745 Series)

Cross sections 0.08 ... 4 mm / AWG 28 ... 12
(THHN, THWN)
Type of mounting DIN-rail mounting (DIN EN 50022)
Weight 596 g
Standards/Specifications EN 60950, EN 61000-6-2,
EN 61000-6-3, UL 60950, UL 508,
ANSI/ISA 12.12.01 (Class I Div.2)*,
ATEX*
(* pending)
787-722
4
291
4
EPSITRON
ECO Power
L
N
3
DC+
DC+
DC
DC
Pack.
Unit
for DIN 35 rail
787-722 1
Technical Data
Input:
2.0 A at 115 VAC
Discharge current < 3.5mA
Output:
Output current Io 5 A at 24 V DC
LED red (overload)
Power loss P
V
19.5 W (at 230 VAC and 5 ADC)
Max. power loss P
V
23.5 W (at 110 VAC and 5.5 ADC)
Fuse protection:
Internal fuse F 5 A / 250 V
input voltage
Technical Data
No-load proof yes
MTBF 480000 h (acc. IEC 61709)
(WAGO 745 Series)

Cross sections 0.08 mm ... 4 mm / AWG 28 ... 12
(THHN, THWN)
Weight 850 g
EN 61000-6-3, UL 60950, UL 508,
ATEX*
(* pending)
787-732
4
292
EPSITRON
ECO Power
L
N
3
DC+
DC+
DC
DC
Pack.
Unit
for DIN 35 rail
787-732 1
Technical Data
Input:
Frequency 47 Hz ... 63 Hz
3.0 A at 115 VAC
Discharge current < 3.5mA
Output:
LED red (overload)
Power loss P
V
37.5 W (at 230 VAC and 10 ADC)
Max. power loss P
V
53 W (at 110 VAC and 11 ADC)
Fuse protection:
Internal fuse F 5 A / 250 V
input voltage
Technical Data
No-load proof yes
MTBF 480000 h (acc. IEC 61709)
(WAGO 745 Series)

Cross sections 0.08 mm ... 4 mm / AWG 28 ... 12
(THHN, THWN)
Weight 1200 g
EN 61000-6-3, UL 60950, UL 508,
ATEX*
(* pending)
787-819
4
293
4
EPSITRON
PRO Power
L
N
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
Primary switch mode power supply with PowerBoost and TopBoost
Stand-by input for switching off the output and minimizing power
consumption
DC OK contact for output monitoring
Parallel operation, series connection possible
Prepared for class I equipment
Enclosed for use in switchgear cabinets
Pack.
Unit
12 V DC / 6 A
787-819 1
Technical Data
Input:
Input voltage derating -5 % / V AC < 95 VAC
Input current Ii 0.51 A at 230 VAC and 6 ADC
Discharge current 1 mA typ.
Inrush current < 30 A (peak)
Mains failure hold-up time 70 ms typ. at 230 VAC
Output:
PowerBoost 12 ADC (for 4 s); 9 ADC (for 8 s)
TopBoost 21 ADC (for 25 ms)
Residual ripple < 70 mV (peak-peak)
Overload behavior TopBoost / PowerBoost /Constant current
Operational indication LED green (Vo), LED red (error)
Signaling Relay contact DC O.K. (changeover
contact)
Power loss P
V
0.5 W (stand-by) / 3.0 W (no load) /
9.4 W (rated load)
Fuse protection:
Internal fuse 2 AT
External fuse Circuit breakers 6 A, 10 A, 16 A,
input voltage
Technical Data
Derating -3 % / K (> +50 C)
Test voltage pri.-sec./ pri.-gr. / sec.-gr. 4.2 kV DC / 2.2 kV DC / 0.7 kV DC
No-load proof yes
Signalising: WAGO 733 Series
0.08 mm ... 2.5 mm / AWG 28 ... 12
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
Strip lengths Input/Output: 8 ... 9 mm / 0.33 in
Signalising: 5 ... 6 mm / 0.22 in
Type of mounting DIN-rail mounting (EN 60715) in
2 positions
(incl. female connector)
Length from upper-edge of DIN 35 rail
Weight 800 g
Standards/Specifications EN 60950, EN 61204-3, UL 60950,
UL 508
787-821
4
294
EPSITRON
PRO Power
L
N
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
12 V DC / 10 A
787-821 1
Technical Data
Input:
Output:
TopBoost 60 ADC (for 25 ms);
40 ADC at V
IN
< 110 VAC (for 25 ms)
contact)
Efficiency 87.8 % typ.
Power loss P
V
14.6 W (rated load)
Fuse protection:
Internal fuse 4 AT
input voltage
Technical Data
Derating -3 % / K (> +50 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
2 positions
Weight 1295 g
UL 508
787-831
4
295
4
EPSITRON
PRO Power
L
N
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
12 V DC / 15 A
787-831 1
Technical Data
Input:
Input voltage derating -1.5 % / V AC < 110 VAC
Inrush current < 8 A (active inrush current limitation)
Output:
PowerBoost 30 ADC (for 4 s); 22.5 ADC (for 8 s)
contact)
Power loss P
V
23.4 W (rated load)
Fuse protection:
Internal fuse 6.3 AT
input voltage
Technical Data
Derating -3 % / K (> +50 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
2 positions
Weight 1480 g
UL 508
787-818
4
296
EPSITRON
PRO Power
L
N
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
24 V DC / 3 A
787-818 1
Technical Data
Input:
Output:
Output voltage range 22 ... 29.5 VDC adjustable
PowerBoost 6 ADC (for 4 s); 4.5A DC(for 8 s)
TopBoost 14 A DC (for 25 ms)
contact)
Power loss P
V
8.8 W (rated load)
Fuse protection:
Internal fuse 2 AT
input voltage
Technical Data
Derating -3 % / K (> +50 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
2 positions
Weight 960 g
UL 508
787-822
4
297
4
EPSITRON
PRO Power
L
N
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
24 V DC / 5 A
787-822 1
Technical Data
Input:
Output:
Output voltage range 22... 29.5 VDC adjustable
PowerBoost 10 ADC(for 4 sec.);
7.5 ADC (for another 2 sec.)
Residual ripple < 70mVpp
contact)
Power loss P
V
14.6 W (rated load)
Fuse protection:
Internal fuse 4 AT
input voltage
Transient overvoltage protection: Varistor
Technical Data
Derating -2.5 % / K (> 55 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
2 positions
Weight 1268 g
UL 508
787-832
4
298
EPSITRON
PRO Power
L
N
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
24 V DC / 10 A
787-832 1
Technical Data
Input:
Inrush current Ie (active inrush current limitation)
Output:
Output voltage range 22... 29.5 VDC adjustable
PowerBoost 20 ADC(for 4 sec.);
15 ADC (for another 2 sec.)
contact)
Power loss P
V
19.7 W (rated load)
Fuse protection:
input voltage
Technical Data
Derating -2.5 % / K (> 55 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
2 positions
Weight 1485 g
UL 508
787-834
4
299
4
EPSITRON

PRO Power
L
N
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
24 V DC / 20 A
787-834 1
Technical Data
Input:
Output:
contact)
Power loss P
V
50.2 W (rated load)
Fuse protection:
Internal fuse 10 AT
input voltage
Technical Data
Derating -3 % / K (> +50 C)
No-load proof yes
Wire connection Input: WAGO 231 Series
Output: WAGO 831 Series
Cross sections Input:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output:
0.5 mm ... 10 mm / AWG 20 ... 8
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
Strip lengths Input: 8 ... 9 mm / 0.33 in
Output: 13 ... 15 mm / 0.55 in
2 positions
Weight 2300 g
Standards/Specifications EN 60950, EN 61204-3, UL 60950*,
UL 508* (* pending)
787-833
4
300
EPSITRON
PRO Power
L
N
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
48 V DC / 5 A
787-833 1
Technical Data
Input:
Output:
contact)
Power loss P
V
21.6 W (rated load)
Fuse protection:
input voltage
Technical Data
Derating -3 % / K (> +50 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
2 positions
Weight 1475 g
Standards/Specifications EN 60950, EN 61204-3,
UL 60950, UL 508
787-835
4
301
4
EPSITRON
PRO Power
L
N
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
48 V DC / 10 A
787-835 1
Technical Data
Input:
Output:
PowerBoost 17.5 ADC (for 4 s); 15 ADC (for 8 s)
contact)
Power loss P
V
43.2 W (rated load)
Fuse protection:
Internal fuse 10 AT
input voltage
Technical Data
Derating -3 % / K (> +50 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output:
0.5 mm ... 10 mm / AWG 20 ... 8
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
Output: 13 ... 15 mm / 0.55 in
2 positions
Weight 2460 g
UL 508* (* pending)
787-840
4
302
EPSITRON
PRO Power
L1
L2
L3
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
24 V DC / 10 A
787-840 1
Technical Data
Input:
Nominal input voltage Vi nom 3x (2x) 400 ... 500 VAC
Input current Ii 3 x 0.6 A at 340 VAC and 10 ADC
Mains failure hold-up time 22 ms typ. at 3 x 400 VAC
Output:
Power loss P
V
7.9 W (stand-by) / 19.9 W (rated load)
Fuse protection:
Internal fuse 3 x 1.6 AT
External fuse 3 x circuit breakers 6 A, 10 A, 16 A,
characteristic: B or C;
or motor circuit breakers,
setpoint: 1.6 A, setting range: 1.6 ... 2.5 A
input voltage
Technical Data
Derating -3 % / K (> 50 C)
No-load proof yes
0.08 ... 2.5 mm / AWG 28 ... 12
2 positions
Weight 1000 g
UL 60950, UL 508
787-842
4
303
4
EPSITRON
PRO Power
L1
L2
L3
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
24 V DC / 20 A
787-842 1
Technical Data
Input:
Output:
Power loss P
V
Fuse protection:
input voltage
Technical Data
Derating -3 % / K (> 50 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output:
0.5 mm ... 10 mm / AWG 20 ... 8
Output: 13 ... 15 mm / 0.55 in
2 positions
Weight 1300 g
UL 60950, UL 508
787-844
4
304
EPSITRON
PRO Power
L1
L2
L3
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
24 V DC / 40 A
787-844 1
Technical Data
Input:
Output:
Power loss P
V
Fuse protection:
input voltage
Technical Data
Derating -5 % / K ( 45 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output:
0.5 mm ... 10 mm / AWG 20 ... 8
Output: 13 ... 15 mm / 0.55 in
2 positions
Weight 2500 g
UL 60950, UL 508
787-845
4
305
4
EPSITRON
PRO Power
L1
L2
L3
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
48 V DC / 10 A
787-845 1
Technical Data
Input:
Output:
Power loss P
V
38 W (rated load)
Fuse protection:
Technical Data
Derating -3 % / K (> +50 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output:
0.5 mm ... 10 mm / AWG 20 ... 8
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
Output: 13 ... 15 mm / 0.55 in
2 positions
Weight 1900 g
UL 508* (* pending)
787-847
4
306
EPSITRON
PRO Power
L1
L2
L3
DC+
DC+
DC -
DC -
DC O.K.
Stand-by
consumption
Pack.
Unit
48 V DC / 20 A
787-847 1
Technical Data
Input:
Output:
Power loss P
V
59.2 W (rated load)
Fuse protection:
Technical Data
Derating -5 % / K (> +45 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output:
0.5 mm ... 10 mm / AWG 20 ... 8
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
Output: 13 ... 15 mm / 0.55 in
2 positions
Weight 3270 g
UL 60950, UL 508
787-850
4
307
4
EPSITRON
PRO Power
L1
L2
L3
DC+
DC+
DC -
DC -
LineMonitor for parameter setting and monitoring
RS-232 serial interface
4 signal outputs
Pack.
Unit
24 V DC / 10 A
787-850 1
Technical Data
Input:
Output:
Overload behavior adjustable (constant current / fuse mode)
Operational indication LED green (Vo), LED yellow (warning),
LED red (error)
Signaling LED, LCD, 4 x signal output 24 V DC,
25 mA
LineMonitor, parameter setting via LCD and RS-232 serial interface
Power loss P
V
Fuse protection:
input voltage
Technical Data
Derating -3 % / K (> 50 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
2 positions
Weight 1000 g
UL 60950, UL 508
787-852
4
308
EPSITRON
PRO Power
L1
L2
L3
DC+
DC+
DC -
DC -
4 signal outputs
Pack.
Unit
24 V DC / 20 A
787-852 1
Technical Data
Input:
Output:
LED red (error)
25 mA
Power loss P
V
Fuse protection:
input voltage
Technical Data
Derating -3 % / K (> 50 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output:
0.5 mm ... 10 mm / AWG 20 ... 8
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
Output: 13 ... 15 mm / 0.55 in
2 positions
Weight 1300 g
UL 60950, UL 508
787-854
4
309
4
EPSITRON
PRO Power
L1
L2
L3
DC+
DC+
DC -
DC -
4 signal outputs
Pack.
Unit
24 V DC / 40 A
787-854 1
Technical Data
Input:
Input current Ii 2.0 A at 340 VAC
Output:
LED red (error)
25 mA
Power loss P
V
Fuse protection:
input voltage
Technical Data
Derating -5 % / K (> 45 C)
No-load proof yes
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output:
0.5 mm ... 10 mm / AWG 20 ... 8
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
Output: 13 ... 15 mm / 0.55 in
2 positions
Weight 2300 g
UL 60950, UL 508
787-601
4
310
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
12 V DC / 2 A
787-601 1
Technical Data
Input:
Nominal input voltage Vi nom 100 ... 240 VAC; 140 ... 300 VDC
Input current Ii 0.3 A typ. at 230 VAC
Discharge current 900 A typ.
Output:
Current limitation from approx. 1.5 x Io
Overload behavior Hiccup
Operational indication LED green (12 V o.k.)
Power loss P
V
4.8 W typ. (230 VAC / 12 VDC, 2 A)
Max. power loss P
V
5.7 W typ. (90 VAC / 12 VDC 2 A)
Fuse protection:
Internal fuse 2 AT / 250 VAC
input voltage
Technical Data
Derating -3 % / K (> 50 C)
Overvoltage protection max. 24 VDC (output)
Overload protection via thermal protective circuit
Short circuit protection yes ("hiccup")
No-load proof yes
Parallel operation no
(WAGO 231 Series)

Cross sections 0.08 ... 2.5 mm / AWG 28 ... 12
(THHN, THWN)
Weight 300 g
Standards/Specifications EN 60950-1, EN 61204-3,
EN 61204-7, GL
787-611
4
311
4
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
parallel operation, series connection possible
Pack.
Unit
12 V DC / 4 A
787-611 1
Technical Data
Input:
Output:
Power loss P
V
7.6 W typ. (230 VAC / 12 VDC, 4 A)
Max. power loss P
V
8.4 W typ. (90 VAC / 12 VDC 4 A)
Fuse protection:
input voltage
Technical Data
Derating -3 % / K (> 50 C)
No-load proof yes
(WAGO 231 Series)

(THHN, THWN)
Weight 760 g
EN 61204-7, GL
787-621
4
312
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
12 V DC / 8 A
787-621 1
Technical Data
Input:
Output:
Power loss P
V
12 W typ. (230 VAC / 12 VDC, 8 A)
Max. power loss P
V
17 W typ. (90 VAC / 12 VDC 8 A)
Fuse protection:
input voltage
Technical Data
Derating -3 % / K (>50 C)
No-load proof yes
(WAGO 231 Series)

(THHN, THWN)
Weight 952 g
EN 61204-7, GL
787-602
4
313
4
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
24 V DC / 1.3 A
787-602 1
Technical Data
Input:
Output:
Overload behavior Hiccup
Power loss P
V
4.9 W typ. (230 VAC / 24 VDC, 1.3 A)
Max. power loss P
V
7 W typ. (90 VAC / 24 VDC 1.3 A)
Fuse protection:
input voltage
Technical Data
Short circuit protection yes ("hiccup")
No-load proof yes
(WAGO 231 Series)

(THHN, THWN)
Weight 300 g
Standards/Specifications EN 60950-1, EN 61204-3, EN 61204-7,
UL 60950, UL 508, GL
787-612
4
314
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
24 V DC / 2.5 A
787-612 1
Technical Data
Input:
Output:
Power loss P
V
7 W typ. (230 VAC / 24 VDC, 2.5 A)
Max. power loss P
V
8 W typ. (90 VAC / 24 VDC 2.5 A)
Fuse protection:
Internal fuse 1.6 AT / 250 VAC
input voltage
Technical Data
No-load proof yes
(WAGO 231 Series)

(THHN, THWN)
Weight 612.7 g
UL 60950, UL 508, GL
787-622
4
315
4
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
24 V DC / 5 A
787-622 1
Technical Data
Input:
Output:
Nominal output voltage Vo nom 24 V DC, SELV
Power loss P
V
10 W typ. (230 VAC / 24 VDC, 5 A)
Max. power loss P
V
13 W typ. ( 90 VAC / 24 VDC 5 A)
Fuse protection:
input voltage
Technical Data
No-load proof yes
(WAGO 231 Series)

(THHN, THWN)
Weight 790 g
UL 60950, UL 508, GL
787-632
4
316
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
Switched-Mode Power Supply,,
24 V DC / 10 A
787-632 1
Technical Data
Input:
Input current Ii 2 A typ. at 230 VAC
Inrush current < 60 Ap
Output:
Current limitation from 1.2 x Ia
Operational indication LED green (24 V o.k.), LED red (overload)
Efficiency 88% typ.
Power loss P
V
26.9 W typ. (230 VAC / 24 VDC, 10 A)
Max. power loss P
V
32.6 W typ. (90 VAC / 24 VDC 10 A)
Fuse protection:
input voltage
Technical Data
Derating -3 % / K (>50 C); -2 % / K (Ve < 97 VAC)
Overvoltage protection max. 33 VDC
No-load proof yes
(WAGO 231 Series)

(THHN, THWN)
Weight 950 g
UL 60950, UL 508, GL
787-613
4
317
4
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
thermal overload protection
Pack.
Unit
48 V DC / 1 A
787-613 1
Technical Data
Input:
Output:
Power loss P
V
7 W typ. (230 VAC / 48 VDC, 1 A)
Max. power loss P
V
7.8 W typ. (264 VAC / 48 VDC 1 A)
Fuse protection:
input voltage
Technical Data
No-load proof yes
(WAGO 231 Series)

(THHN, THWN)
Weight 690 g
EN 61204-7, GL
787-623
4
318
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
48 V DC / 2 A
787-623 1
Technical Data
Input:
Output:
Efficiency 90% typ.
Power loss P
V
8.8 W typ. (230 VAC / 48 VDC, 2 A)
Max. power loss P
V
11.4 W typ. (90 VAC / 48 VDC 2 A)
Fuse protection:
input voltage
Technical Data
No-load proof yes
(WAGO 231 Series)

0.5 ... 10 mm / AWG 20 ... 8
(THHN, THWN)
Weight 800 g
EN 61204-7, GL
787-633
4
319
4
EPSITRON
CLASSIC Power
L
N
DC+
DC+
DC -
DC -
Pack.
Unit
48 V DC / 5 A
787-633 1
Technical Data
Input:
Output:
Operational indication LED green (48 V o.k.), LED red (overload)
Efficiency 89% typ.
Power loss P
V
25.9 W typ. (230 VAC / 48 VDC, 5 A)
Max. power loss P
V
31.2 W typ. (90 VAC / 48 VDC 5 A)
Fuse protection:
input voltage
Technical Data
Derating -3 % / K (>50 C); -2 % / K (Ve < 97 VAC)
No-load proof yes
(WAGO 231 Series)

(THHN, THWN)
Weight 940 g
EN 61204-7, GL
787-692
4
320
EPSITRON
CLASSIC Power
L
N
ASI+
ASI -
min. cond. cross section acc. to AS-Interface specification: 1.5 mm
2
Pack.
Unit
for DIN 35 rail
787-692 1
Technical Data
Input:
Input voltage range (85) 97 ... 264 VAC /
(120) 140 ... 300 VDC
Output:
Nominal output voltage Vo nom 30.5 VDC, SELV
Output current Io 3 A at 30.5 VDC
Factory preset 30.5 VDC
Residual ripple < 300 mVpp (< 10 kHz) /
< 50 mVpp (10 kHz ... 20 MHz)
Operational indication LED green (operating condition at Vo)
Power loss P
V
9 W typ. (230 VAC / 30.5 VDC, 3 A)
Max. power loss P
V
14.2 W typ. (264 VAC / 30.5 VDC 3 A)
Fuse protection:
input voltage
Technical Data
No-load proof yes
Series connection no
(WAGO 231 Series)

(THHN, THWN)
Weight 650 g
UL 60950, UL 508, GL
787-1675
4
321
4
Switched-Mode Power Supply with Integrated UPS Charger and Controller
EPSITRON
L
N
3
DC+ DC TEMP REMOTE
DC+
DC+
DC
DC
ACCU
IN OUT
Primary switch mode power supply with integrated charger and controller for
uninterruptible power supply (UPS)
Battery control technology for smooth charging and predictive maintenance
applications
Potential-free contacts provide function monitoring
Buffer time can be set on-site via rotary switch
Parameter setting and monitoring via RS-232 interface
Pack.
Unit
with Integrated UPS Charger and
Controller, 24VDC / 5A
787-1675 1
Technical Data
Input:
Input voltage range 85 V ... 264 V AC
Frequency 45 Hz ... 65 Hz; 0 Hz
Input current Ii 1,1 A at 230 VAC and 5 ADC
Output:
Output voltage range 23.0 28.5 VDC (mains operation)
18.5 27.5 VDC (battery operation)
Output current Io 5 A
Current limitation 1.1 x Io; TopBoost 24 A
Buffer time 0.5 20 min, IPC mode or constant
(adjustable)
Switch-on threshold (adjustable) 22 VDC (pre-configured),
20 25.5 VDC (configurable via software)
Final load voltage 26 29.5 VDC temperature-controlled
(fixed or adjustable)
Charging current 0.3 A ... 0.6 A
Recommended battery modules 787-876, 787-871, 787-872, 787-873
Operational indication Green LED (DC OK), yellow LED (battery
mode), red LED (warning/fault)
Signaling 3 x 24 VDC signal output, 25 mA and
1 x 30 VDC isolated relay contact, 1 A
Remote input to switch off buffer operation
LineMonitor, parameter setting via RS-232 serial interface
Power loss P
V
4 W (battery operation, 24 VDC, 5 A) /
15 W (mains operation,
240 VAC/24 VDC, 5 A)
Fuse protection:
Internal fuse 4 AT (input side)
Technical Data
Derating -3 % / K (> +50 C)
Protection class I
Reverse voltage protection yes
Feedback voltage max. 35 V DC
Parallel operation yes, max. 3 battery modules for buffer time
extension
Wire connection Input/Output/Signals: WAGO 721 Series
Interface: WAGO 733 Series
Cross sections Input/Output/Signals:
0.5 mm ... 10 mm / AWG 20 ... 10
Interface:
0.08 mm ... 2.5 mm / AWG 28 ... 20
Strip lengths Input/Output/Signals:
13 ... 15 mm / 0.55 in
Interface: 8 ... 9 mm / 0.33 in
Dimensions (mm) W x H x L 60 x 127 x 135.5
Weight 440 g
Standards/Specifications EN 60950, UL 60950*, UL 508*,
EN 61000-6-2, EN 61000-6-3
(* pending)
787-870
4
322
EPSITRON
- UPS Charger and Controller

DC+
DC
3
DC+ DC TEMP REMOTE
DC+
DC+
DC
DC
ACCU
IN OUT
Charger and controller for uninterruptible power supply (UPS)
Current and voltage monitoring, as well as parameter setting via LCD and
RS-232 interface
Active signal outputs for watchdog functions
Remote input for switching off buffered output
Input for temperature control of connected battery
With battery control** for detecting the type of connected battery module
and monitoring both battery operating temperature and battery life.
** from manufacturing no. 215563
Pack.
Unit
UPS charger and controller,
24 V DC / 10 A
787-870 1
Technical Data
Input:
Nominal input voltage Vi nom 24 V DC
Input current Ii 0.1 A (no-load running); 0.8 A (charging);
10.8 A (max.)
Inrush current < 4 A (no load)
Switch-on threshold (adjustable) 20 V ... 25.5 V DC
Output:
Nominal output voltage Vo nom 24 V DC
Output voltage range Vi - 0.5 V DC (below switch-on threshold);
20 V ... 25.5 V DC (during buffer
operation)
Current limitation typ. 11 - 14 A
Buffer time 10 s ... 600 s or constant (adjustable)
Final load voltage 26 V ... 29.5 V DC or temperature
controlled (adjustable)
Charging current max. 0.6 A
Recommended battery modules 787-871, 787-872, 787-873, 787-876
LED red (error)
Signaling LCD, 3 x signal output 24 V DC,
25 mA and 1 x floating relay contact
30 V DC, 1 A
Power loss P
V
15 W (stand-by) / 20 W (rated load)
Fuse protection:
Internal fuse 15AT
Technical Data
Rel. humidity 30 % ... 85 % (no condensation))
Test voltage 500 V DC (terminals to enclosure)
Protection class III
Parallel operation yes, for buffer time extension (temperature
measurement evaluation is only possible via
one battery module)
0.08 ... 2.5 mm / AWG 28 ... 12
2 positions
Weight 800 g
Standards/Specifications EN 60950, UL 60950, UL 508,
EN 61000-6-2, EN 61000-6-3
787-875
4
323
4
EPSITRON
- UPS Charger and Controller

DC+
DC
3
DC+ DC TEMP REMOTE
DC+
DC+
DC
DC
ACCU
IN OUT
Charger and controller for uninterruptible power supply (UPS)
Current and voltage monitoring, as well as parameter setting via LCD and
RS-232 interface
Active signal outputs for watchdog functions
Remote input for switching off buffered output
Input for temperature control of connected battery
With battery control** for detecting the type of connected battery module
and monitoring both battery operating temperature and battery life.
Pack.
Unit
UPS charger and controller,
24 V DC / 20 A
787-875 1
Technical Data
Input:
Input current Ii 0.1 A (no-load running); 1.5 A (charging);
21.5 A (max.)
Inrush current < 4 A (no load)
Switch-on threshold (adjustable) 20 V ... 25.5 V DC
Output:
Output voltage range Vi - 1 V DC (below switch-on threshold);
20 V ... 25.5 V DC (buffer mode)
Current limitation typ. 22 - 26A
Buffer time 10 s ... 600 s or constant (adjustable)
Final load voltage 26 V... 29.5 V DC or temperature
controlled (adjustable)
Recommended battery modules 787-871, 787-872, 787-873
LED red (error)
30 V DC, 1 A
Power loss P
V
Fuse protection:
Internal fuse 25 AT
Technical Data
Rel. humidity 30 % ... 85 % (no condensation))
Parallel operation yes, for buffer time extension (temperature
measurement evaluation is only possible via
one battery module)
0.5 mm ... 10 mm / AWG 20 ... 8
Signalising:
0.08 mm ... 0.5 mm / AWG 28 ... 20
Type of mounting DIN-rail mounting (EN 60715) in 2
positions
Weight 1200 g
EN 61000-6-2, EN 61000-6-3
(* pending)
787-876
4
324
EPSITRON
- Lead Gel Battery Modules

DC
Temp
Temp
DC+
N
T
C
1
5

A
T
Lead-acid Absorbed Glass Mat (AGM) battery module for uninterruptible
power supply (UPS)
Can be connected to both 787-870 UPS Controller and power supply with
integrated UPS charger and controller
Parallel connections to increase the buffer time*
With built-in NTC K164 (4.7 kOhm) temperature sensor
DIN 35 mountable rail fastener
Also available with battery control** for battery life monitoring
Pack.
Unit
Lead Gel Battery Module 787-876 1
Technical Data
Input:
Output:
Output current Io max. 7.5 A
Final load voltage max. 27 V DC (at 25 C)
Capacity 1.2 Ah
Fuse protection:
Internal fuse 15 AT (Type FK 2)
* for parallel connection, please switch battery capacity setting to OFF in the UPS
charger and controller.
Technical Data
Service life typ. 5/ 4/ 2 years
at 20 C/ 30 C/ 40 C
Temperature sensor NTC K164 (4.7 k)
Temperature sensor: WAGO 231 Series
0.08 mm ... 2.5 mm / AWG 28 ... 12
Temperature sensor:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Temperature sensor: 8 ... 9 mm / 0.33 in
Height, incl. female connector,
Weight 1800 g
Standards/Specifications Battery is tested to VdS
787-871
4
325
4
EPSITRON

DC+
DC
TEMP
TEMP
power supply (UPS)
Can be connected to 787-873 or 787-875 UPS Controller and power sup-
ply with integrated UPS charger and controller
Parallel connection to increase the buffer time*
Features built-in NTC K164 (4.7 kOhm) temperature sensor
Pack.
Unit
Technical Data
Input:
Output:
Capacity 3.2 Ah
Fuse protection:
Internal fuse 25 AT
Technical Data
at 20 C/ 30 C/ 40 C
0.08 mm ... 2.5 mm / AWG 28 ... 12
Temperature sensor:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Type of mounting Screw mount
Dimensions (mm) W x H x L 76.2 x 168 x 175.5
Weight 3975 g
Standards/Specifications battery is tested to VdS
787-872
4
326
EPSITRON

DC+
DC
TEMP
TEMP
power supply (UPS)
Pack.
Unit
Technical Data
Input:
Output:
Capacity 7Ah
Fuse protection:
Internal fuse 25 AT
Technical Data
at 20 C/ 30 C/ 40 C
0.5 mm ... 10 mm / AWG 20 ... 8
Temperature sensor:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Weight 6500 g
Standards/Specifications battery is tested to VdS
787-873
4
327
4
EPSITRON

DC+
DC
TEMP
TEMP
power supply (UPS)
Pack.
Unit
Technical Data
Input:
Output:
Charging current max. 3A
Capacity 12 Ah
Fuse protection:
Internal fuse 25 AT
Technical Data
at 20 C/ 30 C/ 40 C
0.5 mm ... 10 mm / AWG 20 ... 8
Temperature sensor:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Dimensions (mm) W x H x L 120.5 x 239 x 217.5
Weight 10830 g
Standards/Specifications Battery is tested to VdS
787-860
4
328
Electronic Circuit Breaker
EPSITRON
Electronic circuit breaker with 4 channels, parametrizable

Time-delayed switching of channels
Floating switch contact
Current and voltage monitoring via RS-232 interface and LCD
Watchdog functions with active signal ports
Pack.
Unit
Electronic Circuit Breaker,
24 VDC / 4 x 6 A
787-860 1
Technical Data
Input:
Input voltage range 18 ... 30 V DC
Output:
Nominal output voltage Vo nom 4 x 24 V DC
Nominal current 4 x 1 ... 6 A DC
(adjustable for each channel in 1 A steps)
Voltage drop 140 mV at 6 A
Trip time 100 s (100 ms .. 600 s; adjustable)
Switch-on capacity 1000 F per 1 A DC (max. 7000 F)
Switch-on behavior time-delayed channel switching (250 ms
each)
Operational indication LED green (all channels o.k.),
LED yellow (warning),
LED red (at least one channel has tripped)
30 V DC, 1 A
Remote input Reactivation of all tripped channels via
18 V 30 V DC impulse for min. 50 ms
Power loss P
V
2 W (stand-by) / 5.5 W (rated load)
Fuse protection:
Technical Data
Reverse voltage protection no
Overload protection via suppressor diode at input
Series connection of several devices not permitted
Parallel operation of single channels not permitted
0.5 mm ... 10 mm / AWG 20 ... 8
Output:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output: 8 ... 9 mm / 0.33 in
2 positions
Weight 800 g
Standards/Specifications EN 60950, UL 508, EN 61000-6-2,
EN 61000-6-3
787-862
4
329
4
EPSITRON

Floating switch contact
Pack.
Unit
24 VDC / 4 x 10 A
787-862 1
Technical Data
Input:
Output:
Voltage drop 140 mV at 6 A, 240 mV at 10 A
Trip time 100 s (100 ms .. 600 s; adjustable)
Switch-on capacity 1000 F per 1 A DC (max. 7000 F)
each)
LED yellow (warning),
30 V DC, 1 A
18 V 30 V DC impulse for min. 50 ms
Power loss P
V
Fuse protection:
Internal fuse 15 AT
Technical Data
0.5 mm ... 10 mm / AWG 20 ... 8
Output:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output: 8 ... 9 mm / 0.33 in
2 positions
Weight 800 g
EN 61000-6-3
787-861
4
330
EPSITRON

Features active current limitation, reliably prevents voltage drops
Pack.
Unit
24 VDC / 4 x 8 A
787-861 1
Technical Data
Input:
Output:
Trip time 100 ms (100 ms .. 1.5 s;
adjustable, depending on nominal current)
Switch-on capacity max. 20,000 F
each)
Trip current 1.1 x nominal current typ.
Current limitation 1.5 x nominal current typ.
LED yellow (warnings),
Signaling LCD, 4 x signal output 24 V DC, 25 mA
Power loss P
V
2 W (stand-by) / 8.2 W (rated load)
Fuse protection:
Internal fuse 15 AT
Technical Data
0.5 mm ... 10 mm / AWG 20 ... 8
Output:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Output: 8 ... 9 mm / 0.33 in
2 positions
Weight 800 g
EN 61000-6-3
787-1664
4
331
4
EPSITRON
13 14
ON
OUT1 (+) DC 24V (+)
0 V
OUT1 (+)
OUT1 (+)
OUT1 (+)
0 V
2..10A
2..10A
2..10A
2..10A
Compact 4-channel electronic circuit breaker
210 A nominal current, adjustable for each channel via sealable selector
switch
Switch-on capacity > 50000 F per channel
One illuminated bi-color button per channel simplifies switching (on/off),
resetting and on-site diagnosing
24 VDC output as group message (triggered channel)
24 VDC output as channel status message (pulse sequence)
Remote input resets tripped channels or switching on/off any number of
channels via pulse sequence
Pack.
Unit
24 VDC / 4 x 10 A
787-1664 1
Technical Data
Input:
Output:
Nominal current max. 4 x 10 ADC
(2, 3, 4, 6, 8, 10 A adjustable for each
channel via selector switch)
Trip time Load-dependent (20 ms 100 s)
Switch-on behavior Time-delayed channel switching
(50 100 ms each)
Operational indication Green LED (channel OK),
Red LED (channel triggered)
Signaling 4 x LED (green/red), 1 x 24 VDC group
message , 1 x 24 VDC status message
(pulse sequence)
15 30 VDC pulse for min. 500 ms.
Switching on/off any number of channels
via pulse sequence.
Power loss P
V
1.3 W (stand-by) / 20 W (nominal load)
Fuse protection:
Internal fuse 15 AT per channel
Technical Data
Derating -3 % / K (> +50 C)
Overload protection via 33 V suppressor diode at input
Input/Output: WAGO 721 Series
0.5 mm ... 10 mm / AWG 20 ... 8
Input/Output:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Input/Output: 8 ... 9 mm / 0.33 in
Weight 170 g
Standards/Specifications UL 60950*, UL 508*, UL 2367*, GL*,
EN 60950, EN 61000-6-2,
EN 61000-6-3 (* pending)
787-1668
4
332
EPSITRON
13 14
ON
OUT1 (+) DC 24V (+)
0 V
OUT2 (+)
OUT3 (+)
OUT4 (+)
0 V
2..10A
2..10A
2..10A
2..10A
OUT5 (+)
OUT6 (+)
OUT7 (+)
OUT8 (+)
2..10A
2..10A
2..10A
2..10A
Compact 8-channel electronic circuit breaker
210 A nominal current, adjustable for each channel via sealable selector
switch
One illuminated bi-color button per channel simplifies switching (on/off), re-
setting and on-site diagnosing
24 VDC output as group message (triggered channel)
24 VDC output as channel status message (pulse sequence)
Remote input resets tripped channels or switching on/off any number of
channels via pulse sequence
Pack.
Unit
24 VDC / 8 x 10 A
787-1668 1
Technical Data
Input:
Output:
Nominal output voltage Vo nom 8x 24 V DC
Nominal current max. 8 x 10 ADC
(2, 3, 4, 6, 8, 10 A adjustable for each
channel via selector switch)
Trip time Load-dependent (20 ms 100 s)
Switch-on behavior Time-delayed channel switching
(50 100 ms each)
Operational indication Green LED (channel OK),
Red LED (channel triggered)
Signaling 8 x LED (green/red), 1 x 24 VDC group
message , 1 x 24 VDC status message
(pulse sequence)
15 30 VDC pulse for min. 500 ms.
Switching on/off any number of channels
via pulse sequence.
Power loss P
V
1.3 W (stand-by) / 20 W (nominal load)
Fuse protection:
Internal fuse 15 AT per channel
Technical Data
Derating -3 % / K (> +50 C)
Overload protection via 33 V suppressor diode at input
Input/Output: WAGO-Serie 721
0.5 mm ... 10 mm / AWG 20 ... 8
Input/Output:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Input/Output: 8 ... 9 mm / 0.33 in
Weight 800 g
Standards/Specifications UL 60950*, UL 508*, UL 2367*, GL*,
EN 60950, EN 61000-6-2,
EN 61000-6-3 (* pending)
4
333
4
787-880
4
334
EPSITRON
- Capacitive Buffer Modules

DC+
DC
DC+
DC+
DC
DC
IN OUT
Capacitive buffer module bridges short duration voltage drops
For uninterruptible power supply
Potential-free contact for charge condition monitoring
Pack.
Unit
Capacitive buffer modules,
for DIN 35 rail
787-880 1
Technical Data
Input:
Input current Ii 60 mA (no-load running); 1 A (charging);
11 A (max.)
Switch-on threshold (adjustable) 20 V ... 24 V DC
Output:
Output voltage range Vi - 0.5 V DC (below switch-on threshold);
20.4 V ... 24 V DC (during buffer
operation)
Current limitation electronic, typ. 11 A
Buffer time 0.06 s ... 7.2 s
(depends on load current and switch-on
threshold)
Charging time typ. 5 minutes
Operational indication LED green (Va > 20 V),
LED yellow (charging),
LED red (Va < 20 V)
Signaling 1 x floating relay contact 30 V DC, 1 A
Power loss P
V
1.5 W open circuit
6.5 W nominal load
Technical Data
Service life typ. 87.600 h (at 25 C ambient
operating temperature); typ. 30.500 h (at
40 C ambient operating temperature)
Relay: WAGO 231 Series
0.08 mm ... 2.5 mm / AWG 28 ... 12
Relay:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Relay: 8 ... 9 mm / 0.33 in
2 positions
Weight 1000 g
EN 61000-6-3
787-881
4
335
4
EPSITRON
- Capacitive Buffer Modules

DC+
DC
DC+
DC+
DC
DC
IN OUT
Capacitive buffer module bridges short duration voltage drops
For uninterruptible power supply
Potential-free contact for charge condition monitoring
Pack.
Unit
Capacitive buffer modules,
for DIN 35 rail
787-881 1
Technical Data
Input:
Input current Ii 60 mA (no-load running); 1 A (charging);
22 A (max.)
Switch-on threshold (adjustable) 20 V ... 24 V DC
Output:
Output voltage range Vi - 1 V DC (below switch-on threshold);
20.4 V ... 24 V DC (during buffer
operation)
Current limitation electronic, typ. 22 A
Buffer time 0.17 s ... 16.5 s
(depends on load current and switch-on
threshold)
Charging time typ. 5 minutes
Operational indication LED green (Va > 20 V),
LED yellow (charging),
LED red (Va < 20 V)
Power loss P
V
1.5 W open circuit
15 W nominal load
Technical Data
Service life typ. 87.600 h (at 25 C ambient
operating temperature); typ. 30.500 h (at
40 C ambient operating temperature)
0.5 mm ... 10 mm / AWG 20 ... 8
Relay:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Relay: 8 ... 9 mm / 0.33 in
2 positions
Weight 1000 g
EN 61000-6-3
787-885
4
336
EPSITRON
- Redundancy Module
IN
1
+
2
OUT
Redundancy module with 2 inputs for decoupling 2 power supplies
For redundant or uninterruptible power supply
With potential-free contact for input voltage monitoring
Pack.
Unit
Redundancy Module
24 VDC, 2 x 20 A / 1 x 40 A
787-885 1
Technical Data
Input:
Nominal input voltage Vi nom 2 x 24 V DC
Input current Ii 2 x 20 A, max. 1 x 40 A
Output:
Output voltage range Ve - 1 V DC
Output current Io 20 A, max. 40 A
Operational indication LED green (Vo), 2 x LED yellow (Vi)
Power loss P
V
1.5 W open circuit
14 W nominal load (20 A) /
26 W nominal load (40 A)
Fuse protection:
Internal fuse no
Technical Data
0.5 mm ... 10 mm / AWG 20 ... 8
Relay:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Relay: 8 ... 9 mm / 0.33 in
2 positions
Height from upper-edge of DIN 35 rail,
T=127mm without pluggable female
Weight 870 g
Standards/Specifications EN 60950, UL 60950, UL 508,
EN 61000-6-2, EN 61000-6-3
787-886
4
337
4
EPSITRON
- Redundancy Module
IN
1
+
2
OUT
Redundancy module with 2 inputs for decoupling 2 power supplies
For redundant or uninterruptible power supply
With potential-free contact for input voltage monitoring
Pack.
Unit
Redundancy Module
48 VDC, 2 x 20 A / 1 x 40 A
787-886 1
Technical Data
Input:
Nominal input voltage Vi nom 2 x 48 V DC
Input current Ii 2 x 20 A, max. 1 x 40 A
Output:
Output voltage range Ve - 1 V DC
Output current Io 20 A, max. 40 A
Operational indication LED green (Vo), 2 x LED yellow (Vi)
Power loss P
V
1.7 W (48 VDC/no load) /
20 W (48 VDC/rated load) (20 A) /
40 W (48 VDC/rated load) (40 A)
Fuse protection:
Internal fuse no
Technical Data
0.5 mm ... 10 mm / AWG 20 ... 8
Relay:
0.08 mm ... 2.5 mm / AWG 28 ... 12
Relay: 8 ... 9 mm / 0.33 in
2 positions
Weight 860 g
EN 61000-6-2, EN 61000-6-3
(* pending)
787-890
4
338
EPSITRON - RS-232 Communication Cable
1 2 3 4 5 6 7 8
RxD
PC
Pin 2 = RxD PC
Pin 3 = TxD PC
Pin 5 = GND
TxD
PC
The 787-890 Communication Cable is used for configuration and
visualization via PC or controller.
It is suitable for all 787 Series devices equipped with an RS-232
serial interface.
PC software for 787 Series devices can be downloaded
at: www.wago.com/epsitron
Function blocks for communication with WAGO-I/O-SYSTEM 750
are also available.
NOTE:
The 787-890 Communication Cable is not electrically isolated.
Pack.
Unit
RS-232 communication cable 787-890 1
Technical Data
Type of signal RS-232
Ports 1 x 8-pole 734-108 Female Connector
with strain relief
(787-8xx Module side),
1x 9-pole SUB-D female connector
(PC/controller side)
Isolation No
Cross sections 3 x 0.34 mm (AWG 22), shielded
Length 1.8 m
4
339
4
EPSITRON
Wall Mounting Adapter

Wall mounting adapter,
for screw fixing of 787-8xx devices on
mounting plate or wall
without DIN 35 rail.
Wall mounting adapter, for screw fixing of 787-8xx
devices on mounting plate or wall without DIN 35 rail.
The wall mounting adapter replaces the rail support of the
787-8xx device.
The adapter is screwed to the 787-8xx device using one of
the provided screws.
Pack.
Unit
Wall Mount Adapter 787-895 5
Technical Data
Material Galvanized sheet steel
Fixing Fixing holes: 4 slots, 5.3 mm x 9 mm
Fixing hole spacing: 143 mm x 19.5 mm
Included Wall mounting adapter
1x screw M4 x 16
1x screw M4 x 20
1x screw M4 x 30
4
340
EPSITRON
Carrier Rail Adapter

Carrier rail adapter
for mounting 787-8xx devices
to a DIN 35 rail
Carrier rail adapter for mounting 787-8xx devices to a DIN
35 rail.
The 787-896 Carrier Rail Adapter allows both vertical and
horizontal mounting of 787-8xx devices.
Mounting the adapter to the device is performed by sliding
both single parts into the guide slots of the cooling element
and then screwing, allowing the position to be changed
easily.
Pack.
Unit
Carrier Rail Adapter 787-896 1
Technical Data
Material Galvanized sheet metal
Dimensions (mm) W x H x L 35 x 136.5 x 15.5
Fixing by sliding both single parts into the guide slot and then
screwing
Included Carrier rail adapter
Assembly instructions
4
341
4
EPSITRON
Carrier Rail Adapter

Carrier rail adapter
made of zinc die-cast
for mounting 787-8xx devices
to a DIN 35 rail
Carrier rail adapter made of zinc die-cast for mounting
787-8xx devices to a DIN 35 rail.
The 787-897 Carrier Rail Adapter allows horizontal
mounting of 787-8xx devices.
Mounting the adapter to the device is performed by sliding
both single parts into the guide slots of the cooling element
and then screwing, allowing the position to be changed
easily.
Pack.
Unit
Carrier Rail Adapter 787-897 1
Technical Data
Material Zinc die-cast
Dimensions (mm) W x H x L 37 x 102.5 x 10.5
Fixing by pressing the adapter into the guide slot
Included Carrier rail adapter
Assembly instructions
4
342
Rail-Mounted Modules - Constant Voltage Sources
24 VDC; 3 A
Input 27 ... 35 VDC
24 VDC; 3 A
Input 24 VAC +10 %, 50 ... 60 Hz
Pack.
Unit
Item No.
Pack.
Unit
Constant voltage source 24 VDC 289-907 1 288-800 1
Technical Data
Input voltage 27 ... 35 VDC 24 VAC +10%
Output voltage 24 VDC ( 10 %) 24 VDC ( 10 %)
Nominal output current 3 A 3 A
Weight 88 g 209 g
Dimensions (mm) W x H x L 78.5 x 39 x 66 140 x 44 x 85
(236 Series) CAGE CLAMP
(236 Series)
Cross sections 0.08 ... 2.5 mm / AWG 28 ... 12 (THHN, THWN) 0.08 ... 2.5 mm / AWG 28 ... 12 (THHN, THWN)
Accessories
Marker strips for mounting carrier white 709-198 / translucent 709-196
U
E
0V
U
A
0V
Constant
voltage source
U
A2
0V
U
A1
~
~
Constant
voltage source
4
343
4
24 VDC; 5 A
Input 24 VAC +10 %
Electronic overload protection
Output voltage indication by LED
Pack.
Unit
Constant voltage source 24 VDC 288-801 1
Technical Data
Input voltage 24 VAC +10%
Output voltage 24 VDC ( 10 %)
Nominal output current 5 A
Overload protection electronic
Voltage returns after removal of overload after 4 s
Weight 600.5 g
(236 Series)
Cross sections 0.08 ... 2.5 mm / AWG 28 ... 12 (THHN, THWN)
Accessories
0V
U
A
~
~
Constant
voltage source
with overload
protection
4
344
Rail-Mounted Modules - Power Supplies
115 VAC / 24 VDC; 0.5 A
230 VAC / 24 VDC; 0.5 A
Pack.
Unit
Item No.
Pack.
Unit
Power supply, with universal mounting carrier 288-809 1 288-810 1
Technical Data
Nominal input voltage Vi nom 115 VAC 230 VAC
Input voltage range 10 % 10 %
Frequency 50 Hz ... 60 Hz 50 Hz ... 60 Hz
Power consumption at nominal load 30 VA 30 VA
Nominal output voltage Vo nom 24 VDC 24 VDC
Output voltage range 4 % 4 %
Output current Io 0.5 A 0.5 A
Residual ripple d 10 mVss d 10 mVss
Output fuse 0.8 A slow 0.8 A slow
Weight 579 g 552 g
(236 Series)
Approvals Transformer acc. to VDE 0551 Transformer acc. to VDE 0551
Accessories
Marker strips for mounting carrier white 709-198 / translucent 709-196 white 709-198 / translucent 709-196
+

0,8 A T
L
N
regulator
gray
light gray
orange
blue
+

0,8 A T
L
N
regulator
gray
light gray
orange
blue
4
345
4
230 VAC / 12 VDC; 0.5 A
115 VAC / 24 VDC; 2 A
Pack.
Unit
Item No.
Pack.
Unit
Technical Data
Nominal output voltage Vo nom 12 VDC 24 VDC
Output current Io 0.5 A 2 A
Input fuse 0.8 A medium-slow
Output fuse 0.8 A slow electronic, short-circuit protected
Short-circuit current 2.5 A
Weight 574 g 1969 g
(256 Series)
Accessories
+

0,8 A T
L
N
regulator
gray
light gray
orange
blue
+

0,5 A MT
L
N
gray
light gray
orange
blue
regulator
4
346
Rail-Mounted Modules - Power Supplies
230 VAC / 24 VDC; 2 A
230 VAC / 12 VDC; 0.5 A
230 VAC / 15 VDC; 0.5 A
Pack.
Unit
Item No.
Pack.
Unit
288-815 1
Technical Data
Nominal output voltage Vo nom 24 VDC 12 VDC (288-814)
15 VDC (288-815)
Output current Io 2 A 2 x 0.5 A
Input fuse 0.5 A medium-slow
Output fuse electronic, short-circuit protected 2 x 0.8 A slow
Short-circuit current 2.5 A
Weight 1900 g 675 g (288-814)
665 g (288-815)
(256 Series)
Accessories
+

0,5 A MT
L
N
gray
light gray
orange
blue
regulator
+

T
L
N
gray
light gray
orange
blue
dark gray
regulator
regulator
4
347
4
230 VAC / 15 VDC;
2 x 1 A short-circuit proof
Pack.
Unit
Power supply, with universal mounting carrier 288-816 1
Technical Data
Nominal input voltage Vi nom 230 VAC
Input voltage range 10 %
Power consumption at nominal load 53 VA
Output voltage range 4 %
Output current Io 2 x 1 A
Residual ripple d 10 mVss
Short-circuit current approx. 1.5 A
Weight 1011 g
(256 Series)
Cross sections 0.08 ... 2.5 mm / AWG 28 ... 12 (THHN, THWN)
Approvals Transformer acc. to VDE 0551
Accessories
+

T
L
N
gray
light gray
orange
blue
dark gray
regulator
regulator
4
348
Rail-Mounted Terminal Blocks with DC/DC Converter
DC/DC converter
24 V / 5 V, 0.5 ADCADC
DC/DC converter
24 V / 10 V, 0.5 ADC
Description V
N
/ V
O
Item No.
Pack.
Unit
V
N
/ V
O
Item No.
Pack.
Unit
DC/DC converter, for DIN 35 rail 24 VDC / 5 VDC 2 % 859-801 1 24 VDC / 10 VDC 2 % 859-802 1
Technical Data
N
) 24 VDC 24 VDC
Input voltage range 10 ... 30 VDC 15 ... 30 VDC
Output voltage 5 VDC 2 % 10 VDC 2 %
Output current (max.) 500 mA 500 mA
Line regulation, max. (full load, over input voltage range) 2 % 0.5 %
Max. load regulation (no load to full load, nominal input 0.5 % 0.7 %
Efficiency at full load (24 VDC in) 70 % 85 %
Output noise peak-to-peak max. (20 MHz bandwidth) 150 mV 20 mV
Switching frequency 200 kHz (nominal) 200 kHz (nominal)
Isolation non-isolated non-isolated
Reverse voltage protection, input yes yes
Minimum load requirement no no
Max. transient recovery time (recovery time for load
change from 25 % to 75% of full load)
40 s 500 s
Max. startup time (24 VDC in, full load) 3 ms 3 ms
Max. hold time (nominal input voltage, full load) 1 ms 500 s
Input fuse TVS diode TVS diode
Output short circuit protection temporary (short-circuit of the output for 1 minute without
damage to the device)
temporary (short-circuit of the output for 1 minute without
Temperature coefficient 70 ppm/C 100 ppm/C
Ambient operating temperature 0 C ... +40 C -25 C ... +55 C
CAGE CLAMP
Cross sections 0.08 ... 2.5 mm / AWG 28 ... 14 0.08 ... 2.5 mm / AWG 28 ... 14
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

4
349
4
DC/DC converter
12 V / 24 V, 250 mADC
DC/DC converter
24 V / 12 V, 0.5 ADC
Description V
N
/ V
O
Item No.
Pack.
Unit
V
N
/ V
O
Item No.
Pack.
Unit
DC/DC converter, for DIN 35 rail 12 VDC / 24 VDC 1 % 859-804 1 24 VDC / 12 VDC 2 % 859-805 1
Technical Data
N
) 12 VDC 24 VDC
Input voltage range 8 ... 16 VDC 15 ... 30 VDC
Output voltage 24 VDC 1 % 12 VDC 2 %
Output current (max.) 250 mA 500 mA
Line regulation, max. (full load, over input voltage range) 0.5 % 0.5 %
Max. load regulation (no load to full load, nominal input 0.5 % 0.7 %
Efficiency at full load (24 VDC in) 83 % 85 %
Output noise peak-to-peak max. (20 MHz bandwidth) 40 mV 20 mV
Switching frequency 1.2 MHz (nominal) 200 kHz (nominal)
Isolation non-isolated non-isolated
Reverse voltage protection, input yes yes
Minimum load requirement no no
Max. transient recovery time (recovery time for load
change from 25 % to 75% of full load)
50 s 500 s
Max. startup time (24 VDC in, full load) 8 ms 3 ms
Max. hold time (nominal input voltage, full load) 500 s 500 s
Input fuse TVS diode TVS diode
Output short circuit protection fuse temporary (short-circuit of the output for 1 minute without
Temperature coefficient 100 ppm/C 100 ppm/C
CAGE CLAMP
Cross sections 0.08 ... 2.5 mm / AWG 28 ... 14 0.08 ... 2.5 mm / AWG 28 ... 14
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

4
350
Rail-Mounted Modules - DC/DC Converter
24 V / 24 V; 0.21 ADC
24 V / 18 V; 0.4 ADC
Pack.
Unit
Item No.
Pack.
Unit
DC/DC converter 289-913 1 288-895 1
Technical Data
Input voltage 24 VDC 24 VDC
Input voltage range 10 % 18 ... 36 VDC
Output voltage 24 VDC ( 3 %) 18 VDC ( 1 %)
Nominal output current 210 mA 400 mA
Peak output current 315 mA
Efficiency 65 % ... 75 % 82 %
Test voltage input/output 500 VDC 1500 VDC
Short circuit protection Thermal cut-out permanent
Weight 77 g 75.9 g
(256 Series)
EMC 1-Immunity to interference acc. to EN 50082-2 (1996) * * Only in conjunction with
DALI/DSI Master Module 750-641
EMC 1-Emission of interference acc. to EN 50081-1 (1993) * * Only in conjunction with
DALI/DSI Master Module 750-641
Accessories
O
U
T

O
U
T

O
U
T
+
O
U
T
+
IN
+
IN

O
U
T
+
O
U
T

289-913
288-895
IN
+
IN
+
IN

IN

S
DC
DC
+
DC 24V DC 24V
DC
DC
+
DC 24V DC 18 V
4
351
4
EPSITRON - Back-Up Capacitor Module
Back-up capacitor module
smoothes unstable
24 VDC power supplies
This module is equipped with a capacitor which smoothes
unstable 24 VDC power supplies in case the voltage
tolerances mentioned in our data sheets cannot be
ensured. Reasons for voltage transients could be:
Voltage disconnections (switching transients) on primary
side
Overloads on secondary side
Switching of inductive or capacitive loads
The back-up capacitor module is connected between the
24 V power supply and the electronic device which has to
be protected.
Notice:
If using a non-filtered single-phase power supply, the
capacitor causes a voltage increase.
Pack.
Unit
Back-up capacitor module 288-824 1
Technical Data
Nominal voltage 24 VDC (+25 %)
Nominal current 1 A
Nominal capacity 10000 F
Weight 104.4 g
(236 Series)
Accessories
24V 0V
IN OUT GND
0 V
24V 0V
Power supply
Supply via power
jumper contacts
24 V
WAGO Application: Lighting Control System,
easyCredit Stadium in Nuremberg, Germany
WAGO Products:
WAGO-I/O-SYSTEM with ETHERNET Controllers,
Power Supplies Units and
5
352
5
5
280/870 Series
Rail-Mounted Terminal Blocks with Overvoltage Protection 358 361
286 Series
Pluggable Modules - Surge Suppression Devices 362 363
Pluggable Modules - Surge Suppression Devices 364 366
792 Series
Rail-Mounted Terminal Blocks with Overvoltage Protection 354 356
5
353
5
354
Rail-Mounted Terminal Blocks with Overvoltage Protection
Overvoltage protection for information
technology systems ME24 24 V DC; for
protection of 2 single lines (line/protected
ground), unbalanced interfaces as well as
RS-485 and RS-422 interfaces
technology systems MD24 24 V DC; for
protection of balanced interfaces (line/line)
with electrical isolation (telecommunications)
The coordination characteristics give information about the
let-through energy of the overvoltage protector and the
protection capacity.
Description Nominal Voltage Item No.
Pack.
Unit
Nominal Voltage Item No.
Pack.
Unit
Overvoltage protection in terminal block,
for DIN 35 Rail
24 V DC 792-800 1 24 V DC 792-801 1
Nominal voltage DC 24 V DC 24 V
Max. cont. operating voltage 33 V DC / 23 V AC 33 V DC / 23 V AC
Nominal current 0.5 A 0.5 A
Nominal discharge current I
SN
(8/20) s 5 kA per line ; 10 kA total 5 kA per line ; 10 kA total
Voltage protection level at I
N
category C2 d 65 V (line/protected ground); d 110 V (line/line) d 50 V (line/line); d 750 V (line/protected ground)
Voltage protection level at 1 kV/s category C3 d 45 V (line/protected ground); d 90 V (line/line) d 45 V (line/line); d 650 V (line/protected ground)
Coordination characteristics X / 1 X / 1
Series impedance R / line 1.8 1.8
Response time t
a
d 1 ns d 100 ns (line/protected ground); d 1 ns (line/line)
Limiting frequency 6 MHz line/protected ground 6 MHz line/protected ground
Capacitance C d 1.0 nF (line/protected ground); d 0.5 nF (line/line) d 5 pF (line/protected ground); d 1 nF (line/line)
Degree of protection with end and intermediate plate IP20 IP20
Operating temperature -40 C ... +80 C -40 C ... +80 C
CAGE CLAMP
Approvals IEC 61643-21 IEC 61643-21
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

1 3
4 2
1 3
4 2
5
355
5
technology systems SD24 24 V DC; for
protection of supply lines (power supply units)
technology systems MDEX24 24 V DC; for
protection in intrinsically safe circuits
Pack.
Unit
Pack.
Unit
for DIN 35 Rail
24 V DC 792-802 1 24 V DC 792-803 1
Max. cont. operating voltage 33 V DC / 23 V AC 33 V DC / 23 V AC
Max. Input voltage acc. to EN 50020 U
i
30 V
Max. input current acc. to EN 50020 I
i
0.5 A
Nominal current 10 A 0.5 A
SN
(8/20) s 5 kA (line/protected ground); 300 A (line/line) 5 kA per line ; 10 kA total
N
category C2 d 50 V (line/line); d 750 V (line/protected ground) d 1500 V (line/protected ground); d 50 V (line/line)
Voltage protection level at 1 kV/s category C3 d 45 V (line/line); d 650 V (line/protected ground) d 1400 V (line/protected ground); d 45 V (line/line)
Series impedance R / line 1.8
Response time t
a
d 100 ns (line/protected ground); d 1 ns (line/line) d 100 ns (line/protected ground); d 1 ns (line/line)
Limiting frequency 7 MHz 6 MHz
Capacitance C d 12 pF (line/protected ground); d 1 nF (line/line) d 6 pF (line/protected ground); d 1 nF (line/line)
CAGE CLAMP
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

1 3
4 2
1 3
4 2
5
356
technology systems MD48LON 48 24 V DC;
for protection of LON networks
(FTT 10 or LPT 10)
technology systems MDHF5 5 V DC; for
protection of PROFIBUS networks
Pack.
Unit
Pack.
Unit
for DIN 35 Rail
48 V DC 792-804 1 5 V DC 792-805 1
Max. cont. operating voltage 55 V DC / 38.5 V AC 6 V DC / 4.2 V AC
Nominal current 1.7 A 0.1 A
SN
(8/20) s 5 kA per line ; 10 kA total 5 kA per line ; 10 kA total
N
category C2 d 100 V (line/line); d 750 V (line/protected ground) d 27 V (line/line); d 50 V (line/protected ground)
Voltage protection level at 1 kV/s category C3 d 70 V (line/line); d 650 V (line/protected ground) d 14 V (line/line); d 14 V (line/protected ground)
Series impedance R / line 0.4 1
Response time t
a
d 100 ns (line/lineound); d 1 ns (line/protected ground) d 1 ns
Limiting frequency 10 MHz 250 MHz / 180 MHz line/protected ground
Capacitance C d 0.6 pF (line/protected ground); d 10 pF (line/line) d 16 pF (line/protected ground); d 19 pF (line/line)
CAGE CLAMP
91 mm/3.58 in

5
6

m
m
/
2
.
2

i
n

1 3
4 2
1 3
4 2
5
357
5
Operating tool Wire connection Marking pen
with fibre tip
Test pin End and
intermediate plate
Push-in type jumper
bar Commoning
3-way 859-403 200 (8x25)
4-way 859-404 200 (8x25)
5-way 859-405 200 (8x25)
6-way 859-406 100 (4x25)
7-way 859-407 100 (4x25)
8-way 859-408 100 (4x25)
9-way 859-409 100 (4x25)
10-way 859-410 100 (4x25)
red ... /000-005
blue ... /000-006
Marking 1 ...10 (10 x) 248-502 5 cards
11 ... 20 (10x) 248-503 5 cards
21 ... 30 (10x) 248-504 5 cards
31 ... 40 (10x) 248-505 5 cards
41 ... 50 (10 x) 248-506 5 cards
1 ... 50 (2 x) 248-566 5 cards
K 1 ... K 10 (10 x) 248-450 5 cards
K 11 ... K 20 (10 x) 248-451 5 cards
K 100 (10 x) 248-452 5 cards
U 1 ... U 10 (10 x) 248-453 5 cards
U 11 ... U 20 (10 x) 248-454 5 cards
U 100 (10 x) 248-455 5 cards
5
358
With varistor
V
BN
AC/DC 24 V ... 110/120 V;
I
SN
60 A ... 130 A
Rated current 20 A
Terminal block width 5 mm/0.197 in
With suppressor diode
V
BN
AC/DC 24 V ... AC 230 V;
I
SN
11 A ... 122 A
Rated current 20 A
Through terminal blocks with the same shape
see Full Line Catalog Volume 1
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
Terminal block with surge suppression device and
direct connection to DIN 35 rail
24 V DC 280-502/281-609 50 24 V DC 280-502/281-602 50
48 V DC 280-502/281-610 50 48 V DC 280-502/281-603 50
60 V DC 280-502/281-611 50 60 V DC 280-502/281-604 50
115 V DC 280-502/281-612 50 115 V DC 280-502/281-605 50
24 VAC 280-502/281-613 50 24 VAC 280-502/281-606 50
110/120 VAC 280-502/281-614 50 110/120 VAC 280-502/281-607 50
230 VAC 280-502/281-608 50
Technical Data V
N
Max. Operating
Voltage V
B max.
Nominal Discharge
Current I
SN
Max. Surge
Current I
S max.
Capacity
Protection
Level
Terminal blocks with
varistor
24 V DC 31 V DC 60 A 250 A d 1.25 nF 77 V DC
48 V DC 65 V DC 60 A 250 A d 0.72 nF 135 V DC
60 V DC 85 V DC 130 A 1.2 kA d 0.48 nF 165 V DC
115 V DC 150 V DC 130 A 1.2 kA d 0.22 nF 300 V DC
24 VAC 30 V AC 60 A 250 A d 1.05 nF 93 V AC
110/120 VAC 140 V AC 130 A 1.2 kA d 0.18 nF 360 V AC
suppressor diode
24 V DC 30.8 V DC 122 A d 1 nF 64 V DC
48 V DC 58 V DC 59 A d 0.63 nF 111 V DC
60 V DC 77 V DC 44 A d 0.55 nF 162 V DC
115 V DC 136 V DC 25 A d 0.4 nF 282 V DC
24 VAC 28 V AC 86 A d 0.8 nF 84 V AC
110/120 VAC 133 V AC 18 A d 0.35 nF 388 V AC
230 VAC 253 V AC 11 A d 0.36 nF 706 V AC
Technical Data
CAGE CLAMP
Accessories Item No. Pack. Unit Item No. Pack. Unit
End and Intermediate Plate, 2.5 mm/0.098 in thick orange 280-341 100 (4*25) orange 280-341 100 (4*25)
gray 280-340 100 (4*25) gray 280-340 100 (4*25)
<_________ 64 mm/2.52 in __________>
(
_
_
_
_
_
_
_
_
_

5
8
,
5
m
m
/
2
.
3
0

i
n

_
_
_
_
_
_
_
_
)
<_________ 64 mm/2.52 in __________>
(
_
_
_
_
_
_
_
_
_

5
8
,
5
m
m
/
2
.
3
0

i
n

_
_
_
_
_
_
_
_
)
5
359
5
With varistor
V
BN
AC/DC 24 V ... AC 230 V;
I
SN
300 A ... 1 kA
Rated current 20 A
V
BN
AC/DC 24 V ... AC 230 V;
I
SN
37 A ... 305 A
Rated current 20 A
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
24 V DC 280-502/281-582 25 24 V DC 280-502/281-589 25
48 V DC 280-502/281-583 25 48 V DC 280-502/281-590 25
60 V DC 280-502/281-584 25 60 V DC 280-502/281-591 25
115 V DC 280-502/281-585 25 115 V DC 280-502/281-592 25
24 V AC 280-502/281-586 25 24 V AC 280-502/281-593 25
110/120 V AC 280-502/281-587 25 110/120 V AC 280-502/281-594 25
230 V AC 280-502/281-588 25 230 V AC 280-502/281-595 25
Technical Data V
N
Max. Operating
Voltage V
B max.
Nominal Discharge
Current I
SN
Max. Surge
Current I
S max.
Capacity
Protection
Level
varistor andend plate
24 V DC 31 V DC 300 A 1 kA d 4.6 nF 77 V DC
60 V DC 85 V DC 1 kA 4.5 kA d 1.7 nF 165 V DC
24 V AC 30 V AC 300 A 1 kA d 3.5 nF 93 V AC
110/120 V AC 150 V AC 1 kA 4.5 kA d 0.57 nF 360 V AC
230 V AC 275 V AC 1 kA 4.5 kA d 0.32 nF 710 V AC
varistor and end plate
24 V DC 28 V DC 305 A d 2.7 nF 59 V DC
48 V DC 53 V DC 162 A d 1.7 nF 111 V DC
60 V DC 70 V DC 123 A d 1.35 nF 146 V DC
115 V DC 128 V DC 68 A d 0.85 nF 265 V DC
24 V AC 26 V AC 258 A d 2.4 nF 70 V AC
110/120 V AC 133 V AC 46 A d 0.63 nF 388 V AC
230 V AC 253 V AC 37 A d 0.4 nF 706 V AC
Technical Data
CAGE CLAMP
<_________ 64 mm/2.52 in __________>
(
_
_
_

3
9
,
5

m
m
/
1
.
5
6

i
n

_
_
_
)
<_________ 64 mm/2.52 in __________>
(
_
_
_

3
9
,
5

m
m
/
1
.
5
6

i
n

_
_
_
)
5
360
With gas filled surge arrester
V
BN
AC 24 V ... 230 V;
I
SN
5 kA
Rated current 20 A
With gas filled surge arrester
V
BN
AC 24 V ... 230 V;
I
SN
5 kA
Rated current 20 A
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
24 V AC/DC 280-503/281-579 25 24 V AC/DC 870-523/281-579 25
110/120 V AC/DC 280-503/281-580 25 110/120 V AC/DC 870-523/281-580 25
230 V AC/DC 280-503/281-581 25 230 V AC/DC 870-523/281-581 25
Technical Data
Max. operating voltage V
B max.
70 V AC/90 V DC
180 V AC/230 V DC
450 V AC/600 V DC
70 V AC/90 V DC
180 V AC/230 V DC
450 V AC/600 V DC
SN
5 kA 5 kA
Capacity d 2 pF d 2 pF
Protection level 600 V AC
650 V AC
1100 V AC
600 V AC
650 V AC
1100 V AC
CAGE CLAMP
Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 14 0.08 mm ... 2.5 mm / 4 mm "f" / AWG 28 ... 14
Accessories Item No. Pack. Unit
End and Intermediate Plate, 2 mm/0.079 in thick gray 870-518 100 (4*25)
orange 870-519 100 (4*25)
<_________ 64 mm/2.52 in __________>
(
_
_
_

3
9
,
5

m
m
/
1
.
5
6

i
n

_
_
_
)
<___________ 70 mm/2.76 in ___________>
(
_
_
_
_

4
0

m
m
/
1
.
5
7

i
n

_
_
_
_
)
5
361
5
With varistor
V
BN
AC/DC 24 V ... AC 230 V;
I
SN
300 A ... 1 kA
Rated current 20 A
V
BN
AC/DC 24 V ... AC 230 V;
I
SN
37 A ... 305 A
Rated current 20 A
Description V
N
Item No.
Pack.
Unit
V
N
Item No.
Pack.
Unit
24 V DC 870-523/281-582 25 24 V DC 870-523/281-589 25
48 V DC 870-523/281-583 25 48 V DC 870-523/281-590 25
60 V DC 870-523/281-584 25 60 V DC 870-523/281-591 25
115 V DC 870-523/281-585 25 115 V DC 870-523/281-592 25
24 V AC 870-523/281-586 25 24 V AC 870-523/281-593 25
110/120 V AC 870-523/281-587 25 110/120 V AC 870-523/281-594 25
230 V AC 870-523/281-588 25 230 V AC 870-523/281-595 25
Technical Data V
N
Max. Operating
Voltage V
B max.
Nominal Discharge
Current I
SN
Max. Surge
Current I
S max.
Capacity
Protection
Level
Terminal block with
varistor
24 V AC 30 V AC 300 A 1 kA d 3.5 nF 93 V AC
110/120 V AC 150 V AC 1 kA 4.5 kA d 0.57 nF 360 V AC
230 V AC 275 V AC 1 kA 4.5 kA d 0.32 nF 710 V AC
Terminal block with
suppressor diode
24 V DC 28 V DC 169 A d 2.7 nF 59 V DC
48 V DC 53 V DC 90 A d 1.7 nF 111 V DC
60 V DC 70 V DC 69 A d 1.35 nF 146 V DC
115 V DC 128 V DC 68 A d 0.85 nF 265 V DC
24 V AC 26 V AC 258 A d 2.4 nF 70 V AC
110/120 V AC 133 V AC 46 A d 0.63 nF 388 V AC
230 V AC 253 V AC 37 A d 0.4 nF 706 V AC
Technical Data
CAGE CLAMP
Cross sections 0.08 mm ... 2.5 mm / 4 mm "f" / AWG 28 ... 14 0.08 mm ... 2.5 mm / 4 mm "f" / AWG 28 ... 14
<___________ 70 mm/2.76 in ___________>
(
_
_
_
_

4
0

m
m
/
1
.
5
7

i
n

_
_
_
_
)
<___________ 70 mm/2.76 in ___________>
(
_
_
_
_

4
0

m
m
/
1
.
5
7

i
n

_
_
_
_
)
5
362
Pluggable Modules - Surge Suppression Devices
Single stage suppression for 3-wire control,
signal or power circuits
No interruption of current flow when
changing module 24 V AC/DC
changing module 110 V / 120 V AC; 230 V AC
Note:
For isolation measurements the ground (earth) contact at
the transient suppression module must be disconnected.
WSB marker card
Marking F; Item No.: 209-791
Marking 1 ... 10; Item No.: 209-702
Marking Lin, N, PE Lout, N, PE, Lin, N, PE;
Item No.: 249-655
Description U
BN
Item No.
Pack.
Unit
U
BN
Item No.
Pack.
Unit
Surge suppression module 24 V AC/DC 286-836 1 230 V AC 286-835 1
115 V AC 286-835/115-000 1
Nominal operating voltage V
BN
24 V AC/DC 230 V AC; 115 V AC
Operating voltage 35 V AC / 45 V DC 275 V AC; 150 V AC
Nominal discharge current between L/N and PE 300 A 1 kA
Nominal discharge current between L and N 300 A 1 kA
Max. surge current between L/N and PE 1 kA 4.5 kA
Max. surge current between L and N 1 kA 4.5 kA
Protection level between L/N and PE 700 V 1,3 kV; 1 kV
Protection level between L and N 100 V 700 V; 400 V
Response time between L/N and PE 1 s 1 s
Response time between L and N 25 ns 25 ns
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
L
IN
N
PE
L
OUT
N
PE
L
IN
N
PE
L
OUT
N
PE
5
363
5
changing module with fault indication
110 V / 120 V AC
changing module with fault indication
230 V AC
Note:
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Marking Lin, N, PE Lout, N, PE, Lin, N, PE;
Item No.: 249-655
Description U
BN
Item No.
Pack.
Unit
U
BN
Item No.
Pack.
Unit
Surge suppression module 230 V AC 286-838 1 115 V AC 286-838/115-000 1
BN
230 V AC 115 V AC
Operating voltage 300 V AC 150 V AC
Nominal discharge current between L/N and PE 1 kA 1 kA
Nominal discharge current between L and N 1 kA 1 kA
Max. surge current between L/N and PE 2.5 kA 2.5 kA
Max. surge current between L and N 2.5 kA 2.5 kA
Protection level between L/N and PE 1 kV 800 V
Protection level between L and N 800 V 400 V
Response time between L/N and PE 1 s 1 s
Response time between L and N 25 ns 25 ns
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
L
IN
N
PE
L
OUT
N
PE

L
IN
N
PE
L
OUT
N
PE

5
364
Three-stage suppression for 2-wire data,
measuring and control circuits 24 V DC
Note:
For isolation measurements the ground (earth) contact at the
transient suppression module must be disconnected.
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Marking Lin, PE, PE, N, Lout, PE, PE, N;
Item No.: 249-652
Description U
BN
Item No.
Pack.
Unit
U
BN
Item No.
Pack.
Unit
Surge suppression module 24 V DC 286-833 1 12 V DC 286-834 1
BN
24 V DC 12 V DC
Nominal current 0.1 A 6 A
Nominal discharge current between L/N and PE 1.5 kA
Nominal discharge current between L and N 5 kA
Max. surge current between L/N and PE 1.5 kA
Max. surge current between L and N 5 kA
Protection level between L/N and PE d 22 V
Protection level between L and N d 59 V
Response time between L/N and PE d 10 ns
Response time between L and N d 10 ns
Through resistance / inductivity 20 m / 2 x 7 H 50 m / 14 H
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
+
U
B
L
IN
PE
N
L
OUT
PE
N
5
365
5
Two-stage suppression for 3-wire control,
signal or power circuits 24 V AC/DC
Note:
For isolation measurements the ground (earth) contact at the
transient suppression module must be disconnected.
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Marking Lin, PE, PE, N, Lout, PE, PE, N;
Item No.: 249-652
Marking PE, N, Lin, PE, N, Lout;
Item No.: 209-911
Description U
BN
Item No.
Pack.
Unit
U
BN
Item No.
Pack.
Unit
Surge suppression module 24 V DC 286-834/024-000 1 24 V AC/DC 286-831 1
BN
24 V DC 24 V AC/DC
Operating voltage 30 V DC 30 V AC / 38 V DC
Nominal discharge current between L/N and PE 1.5 kA 200 A
Nominal discharge current between L and N 1.5 kA
Max. surge current between L/N and PE 1.5 kA 500 A
Max. surge current between L and N 1.5 kA
Protection level between L/N and PE d 59 V d 93 V
Protection level between L and N d 93 V
Response time between L/N and PE d 10 ns d 25 ns
Response time between L and N d 25 ns
Through resistance / inductivity 50 m / 14 H 25 m / 2 x 7 H
IEC 60664-1
250 V / 4 kV / 3
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 25 mm / 0.984 in 280-764 1
L
IN
PE
N
L
OUT
PE
N
L
IN
N
PE
L
OUT
N
PE
5
366
signal or power circuits 24 V AC/DC
signal or power circuits with filter 115 V DC,
230 V DC, 110 V / 120 V AC, 230 V AC/DC
Note:
WSB marker card
Marking 1 ... 10; Item No.: 209-702
Marking PE, N, Lin, PE, N, Lout;
Item No.: 209-911
Description U
BN
Item No.
Pack.
Unit
U
BN
Item No.
Pack.
Unit
Surge suppression module 24 V AC/DC 286-832 1 115 V DC 286-844 1
110 V/120 V AC 286-843 1
230 V DC 286-841 1
230 V AC 286-842 1
BN
24 V AC/DC 115 V DC; 110 V/120 V AC
230 V DC; 230 V AC
Operating voltage AC 30 V / 38 V DC 180 V DC; 140 V AC
320 V DC; 250 V AC
Nominal discharge current between L/N and PE 200 A 600 A
Nominal discharge current between L and N 1.5 kA 600 A
Max. surge current between L/N and PE 500 A 1.5 kA
Max. surge current between L and N 1.5 kA 1.5 kA
Protection level between L/N and PE d 93 V d 900 V
Protection level between L and N d 59 V d 650 V
Response time between L/N and PE d 25 ns d 1 s
Response time between L and N d 5 ns d 25 ns
Through resistance / inductivity 25 m / 2 x 7 H - / 2 x 0.8 mH
IEC 60664-1
250 V / 4 kV / 3 250 V / 4 kV / 3
Insertion loss 20 dB ... 40 dB / 0.15 MHz ... 30 MHz
Pack.
Unit
Item No.
Pack.
Unit
25 mm / 0.984 in 280-764 1 30 mm / 1.181 in 280-765 1
L
IN
N
PE
L
OUT
N
PE
L
IN
N
PE
L
OUT
N
PE
5
367
5
WAGO Application: Plastic Technology
Center (SKZ) in Wrzburg, Germany
WAGO Products:
WAGO-I/O-SYSTEM with ETHERNET
Controllers, DALI and EnOcean Components
6
368
6
6
770 Series
WINSTA
- Radio Receiver 373

758 Series
Radio Receiver and Transmitter 374
789 Series
EnOcean Radio Receivers in DIN-Rail-Mount Enclosure 372
Wireless Technology
6
369
Process energy from
(push-buttons, vibration, motion,
heat, light)
Ultra low
power
prozessor and
transmitter
Energy converter
Sensors
Receiver
Signal processing
Interface or
actuator
Power
KNX
LonWorks
ETHERNET
BACnet
The Benefits for Electronic and Radio Technology
Radio connection:
30m in the building, 300m in open field
WAGO Radio Receiver with EnOcean Technology
Radio Receiver in I/O Module
For the seamless integration of EnOcean
technology into the
WAGO-I/O-SYSTEM 750
The module can be used with any controller
of the WAGO-I/O-SYSTEM 750.
Pre-programmed function blocks make
integration easy
The number of sensors is almost illimited
Item No. 750-642
6
370
66
External Antenna
The antenna fits to all WAGO
products shown here and is
connected using an SMA socket.
The antenna has a magnetic stand
and a 2.5m long coax cable.
Item No. 758-910
Radio Receiver in DIN-Rail Mount Enclosure
The stand-alone solution for DIN-rail mounting:
4-channel radio receiver module in 70mm
DIN-rail mount enclosure.
Version 1: 4 make contacts,
up to 16 A load carrying capacity
Version 2: 4 changeover contacts,
up to 8 A load carrying capacity per channel.
Item No. 789-601 (make contacts)
Item No. 789-602 (changeover contacts)
Radio Receiver in WINSTA
Box
All integrated: e.g. a complete blinds control (2-way
sunblind outputs for 230V/2A) or a 4-channel module
for lighting control (4-way switch output 230V/16A)
with receiver and all required switching relay.
The WINSTA
boxes are suitable for wall-, floor- and

ceiling-mounting.
Item No. 770-629/102-000 (sunblinds control)
Item No. 770-629/101-000 (lighting control)
Radio Transmitter
Radio transmitter integrated in
universal switch insert.
Item No.
758-940/001-000 (2-channel light)
758-940/003-000 (4-channel light)
758-940/002-000 (2-channel roller blinds)
758-940/004-000 (4-channel roller blinds)
6
371
6
372
4-Channel EnOcean Radio Receivers in DIN-Rail Mount Enclosure
with 4 make contacts, 16 A
with 4 changeover contacts, 8 A
The 4-channel radio receiver in DIN-rail mount enclosure is
used to switch 4 independent electrical devices or loads.
The radio receiver processes telegrams transmitted by
sensors (binary information) using EnOcean radio
technology (PTM + STM modules).
The outputs are switched via relay contacts.
(required)
Pack.
Unit
Item No.
Pack.
Unit
4-channel EnOcean radio receiver 789-601 1 789-602 1
Technical Data
Voltage supply 24 V DC 24 V DC
Voltage range -15 % ... + 20 % -15 % ... + 20 %
Number of receive channels 40 (10 per output) 40 (10 per output)
Number of channels 4 (relay outputs) 4 (relay outputs)
Output current (per channel) max. 16 A, AC1 max. 8 A, AC1
Type of load resistive / lamp load resistive / motor load
Switching frequency max. < 5 Hz max. < 5 Hz
Delay time transmitter /output command < 100 ms; 40 ms ... 70 ms typ. < 100 ms; 40 ms ... 70 ms typ.
Switching voltage 230 V AC 230 V AC
Fuse protection Loads: wire breaker, max.16 A Loads: wire breaker, max.16 A
Isolation potential free contacts potential free contacts
Ambient operating temperature 0C ... +55C 0C ... +55C
CAGE CLAMP
Standards/Specifications Vibration and shock resistance acc. to IEC 60068-2-6 and
IEC 60068-2-27
IEC 60068-2-27
758-910 758-910
24V DC
+ -
K1...K4
K1...K4
...
14 13 ... 44 43
LRN
Us
EnOcean
Receiver
24V DC
+ -
K1...K4
K1...K4
...
14 12 11 ... 44 42 41
LRN
Us
EnOcean
Receiver
6
373
6
WINSTA
Radio Receivers
with 4 make contacts
with sunblind outputs
The 4-channel radio receiver is used to switch 4
independent electrical devices. The 2-channel radio
receiver has 2 sunblind outputs that can be controlled
independently from each other. The radio receiver
processes telegrams transmitted by switches using
EnOcean radio technology (STM modules). The outputs
are switched via relay contacts.
(required)
The state of outputs can be predefined for a power
failure scenario
Wire connection using WINSTA connectors
Illustration and block diagram for 770-629/101-000
Pack.
Unit
Item No.
Pack.
Unit
WINSTA
radio receiver 770-629/101-000 1 770-629/102-000 1

Technical Data
Voltage supply 230 V AC, 50 Hz ... 60 Hz, max. 16 A 230 V AC, 50 Hz ... 60 Hz, max. 16 A
Voltage range 10 % 10 %
Number of channels 4 2
Output current (per channel) max. 16 A / 4 A 2 A motor load
Total current max. 16 A max. 4 A
Inrush current max. 120 A / 50 ms 25 A
Type of load resistive / lamp load resistive / inductive
Switching frequency max. 5 Hz max. 5 Hz
Isolation isolated internal voltage supply
2500 V impulse withstand voltage
isolated internal voltage supply
2500 V impulse withstand voltage
Fuse protection External, 16 A max. External, 16 A max.
Ambient operating temperature 0C ... +55C 0C ... +55C
Type of mounting Wall screw adapter Wall screw adapter
Standards/Specifications Vibration and shock resistance acc. to IEC 60068-2-6 and
IEC 60068-2-27
IEC 60068-2-27
758-910 758-910
Connection accessories WINSTA connectors Input: socket, 3 poles, e.g. 770-103;
4-channel output: plug, 3 poles, e.g. 770-113
Input: socket, 3 poles, e.g. 770-103;
2-channel output: plug, 4 poles, e.g. 770-114
166
2
2 3
0
1
6
1
4
5
150
190
6
.2
9
.6
WINSTA

K1...K4
A1...A4
...
L PE N L PE N
LRN
EnOcean
Receiver
L PE N
6
374
Radio Receiver and Transmitter
External antenna, GSM 900/1800 External antenna, WLAN/Bluethooth 2.4 GHz
Description Item No. Pack. Unit Technical Data
External antenna GSM 900/1800 758-910 1 Frequency band: 870 MHz ... 960 MHz; 1710 MHz ... 1880 MHz
VSWR: 870 MHz ... 960 MHz < 1.5; 1710 MHz ... 1880 MHz < 1.5
Gain: 870 MHz ... 960 MHz 0 dB; 1710 MHz ... 1880 MHz 0 dB
Max. Power: 20 W
Cable length: 250 cm
Connector: SMA right angle plug + ferrite bead
External antenna WLAN/Bluetooth 2.4 GHz 758-912 1 Frequency band: 2400 MHz ... 2485 MHz
Gain: 2 dBi
Cable length: 250 cm
Connector: SMA right angle plug
Notes on operating the antenna with WAGO EnOcean radio receivers: The antenna is to be mounted on a plate measuring at least 9.8 x 9.8 inches (25 x 25 mm)
The distance of interfering sources to the antenna and antenna line must be at least 11.8 inches (30 mm) and the free space between the antenna and the next wall must be at least
13.78 inches (35 mm). The antenna cable should, under no circumstances, be bent sharply, since irreversible damage may result to the antenna (RG 174 bend radius > 0.6 inches/
15mm)
Radio transmitter, EnOcean easyfit PTM 250
2-channel light 758-940/001-000 1 Integrated radio transmitter: EnOcean PTM 200
Energy harvesting source: electrodynamic energy generator, maintenance free
Radio technology /range: EnOcean 868 MHz, RPS Type 2; 300 m free field, typ. 30 m within buildings
Total installation height: 14 mm (frame lies directly against the wall)
Dimensions of rocker /frame cut-out /central plate: 50 x 50 mm / 55 x 55 mm / 71 x 71 mm
Color: white
4-channel light 758-940/003-000 1
2-channel roller blind 758-940/002-000 1
4-channel roller blind 758-940/004-000 1
The universal switch insert can be integrated into numerous control programmes by different manufacturers, e.g.: BERKER, GIRA, JUNG and MERTEN. Delivery is without frame. Frames
of the desired control programm have been orderen separately.
6
375
6
WAGO Application: Bellinzona Business
Center (Tessin), Switzerland
WAGO Products:
WAGO-I/O-SYSTEM with ETHERNET Controllers,
Power Supplies and Interface Modules
7
376
7
7
789 Series
DIN-Rail Mounted Enclosures 382
859 Series
Empty Electronic Terminal Block Housing 381
209, 210, 288 Series
Mounting Carrier for DIN-Rail Mounting PCBs 384 385
Mounting Carrier and Feet for DIN-Rail Mounting PCBs 386 387
280, 286, 786 Series
Empty Component Plug Housings for Building Custom Circuits 378 379
Empty Component Plug Housings for Building Custom Circuits 380
7
377
7
378
Empty Component Plug Housings for Building Custom Circuits
286 Series, empty component plug
Empty component plug, type 9 4-pole, 10 mm / 0.394 in wide 286-110 1
250 V/ 4 KV/ 3 (rated voltage/ rated surge voltage/ pollution degree);
6 A per contact;
Module height 82.5 mm/3.25 in (from upper-edge of DIN 35 rail);
PCB dimensions and component height see drawing and table
PCB dimensions
786 Series, empty component plug
6 A per contact;
Module height 82.5 mm/3.25 in (from upper-edge of DIN 35 rail);
PCB dimensions and component height see drawing and table
PCB dimensions
<___13,4___>
<_________24_________>
<____________________47,6____________________>
<___________________ 45,6___________________>
<
_
_
_
_
_
_
_
_
_
_
_
_
2
8
,
8
_
_
_
_
_
_
_
_
_
_
>
<
_
_
_
_
_
_
_
_
_
_
_
_
_
3
0
_
_
_
_
_
_
_
_
_
_
_
>
20
1
<___________________45,8___________________>
<
_
_
_
_
_
_
_
X
_
_
_
_
_
>
<__________________42,1__________________>

1
,1
>

<
_
2
,3
>

<
_

5
>

<
_
>

<
1
,5
1,3
No components should be mounted in this area
When mounting a PCB vertically, do not mount
components on or over the top edge of the PCB
Module width
Component height
X = total height of PCB
15
9.2
13
10
4.2
8
20
14.2
18
25
19.2
23
<____________________ 79,3____________________>
<
_
_
_
_
_
_
_
_
_
_
_
_
_
5
2
,9
_
_
_
_
_
_
_
_
_
_
_
>
20
1
<____________________78 ____________________>
<
_
_
_
_
_
_
_
X
_
_
_
_
_
>
<__________________ 74,3__________________>

1
,1
>

<
_
2
,
3
>

<
_

5
>

<
_
>

<
1
,
5
1,3
<____________________77,3____________________>
No components should be mounted in this area
When mounting a PCB vertically, do not mount
components on or over the top edge of the PCB
Module width
Component height
X = total height of PCB
15
9.2
13
20
14.2
18
25
19.2
23
7
379
7
Accessories
Unlocking pliers for component plug housing WSB-marker cards
Unlocking pliers for component plug housing 210-492 1
WSB Quick marking system for module width 5 - 17.5 mm plain 209-501 5 cards
Marking 1 ... 10 (10 x) 209-702 5 cards
Adjust the pliers to the proper housing
width
Insert the pliers into the locking slots . . . . . . by compressing the pliers . . . . . . the cover is removed.
2-conductor terminal block 4-conductor terminal block
Other Terminal blocks see Full Line Catalog, Volume 1, Rail-Mounted Terminal Block Systems
7
380
Empty Component Plug Housings for Building Custom Circuits
280 Series, empty component plug housings for building custom circuits
Empty component plug, type 1 2-pole, 5 mm / 0.197 in wide; Inside dimensions of plug W/H/D 3.2/15/15 mm (0.126/0.591/0.591 in) 280-801 100
2-conductor terminal 3-conductor terminal 4-conductor terminal
2-conductor terminal block gray, terminal block width 5 mm /0.197 in, marking on both sides 280-616 100
2-conductor terminal block gray, terminal block width 5 mm /0.197 in, marking in center position 280-916 100
3-conductor terminal block gray, terminal block width 5 mm /0.197 in 280-610 100
4-conductor terminal block gray, terminal block width 5 mm /0.197 in, marking on both sides 280-606 100
4-conductor terminal block gray, terminal block width 5 mm /0.197 in, marking in center position 280-686 100
For accessories like end plates, jumpers etc. see Full Line Catalog, Volume 1, Rail-Mounted Terminal Block Systems
Empty Component Plug Housings for Building
Custom Circuits, 280 Series
2-conductor terminal
block
block
block
block
Pack.
Unit
Empty component plug, type 4 2-pole, 10 mm / 0.394 in wide; Inside dimensions of plug W/H/D 8.2/15/15 280-803 50
6 A max.
Front-entry 2-conductor terminal block gray, terminal block width 5 mm /0.197 in, marking on both sides 280-601 100
Front-entry 2-conductor terminal block gray, terminal block width 5 mm /0.197 in, marking in center position 280-901 100
Front-entry 3-conductor terminal block gray, terminal block width 5 mm /0.197 in 280-681 100
Wire range 0.08 mm ... 2.5 mm / AWG 28 ... 12 (THHN, THWN); Stripped lengths 8 ... 9 mm / 0.33 in
Front-entry 4-conductor terminal block gray, terminal block width 5 mm /0.197 in, marking on both sides 280-621 100
Front-entry 4-conductor terminal block gray, terminal block width 5 mm /0.197 in, marking in center position 280-833 100
Side-entry 2-conductor terminal block gray, terminal block width 5 mm /0.197 in 280-101 100
Wire range .,08 mm ... 2.5 mm / AWG 28 ... 14; Stripped lengths 8 ... 9 mm / 0.33 in,
For accessories like end plates, jumpers etc. see Full Line Catalog, Volume 1, Rail-Mounted Terminal Block Systems
Press screwdriver into appropriate
slot (1) and remove cover with
levering action (2).
Introduce cover in the outer groove
of the plug and press completely
down until snap-fit engaged.
<
_

1
5
,
6
_
>
>
B
<
<_15,8_>
>
A
<
Typ 2,3,4
<
_

1
5
,
6
_
>
<___ >
2,6
<__18,4__>
>
B
<
>
A
<
Typ 1
2
10
8,2
1
5
3,2
Typ
A
B
3
10
8,2
4
10
8,2
7
381
7
Empty Electronic Terminal Block Housing
859-110 859-501 859-110 and 859-501
Modular housing for mounting electronic
components in a rail-mounted terminal block
859-110 1 Housing material: PA 6.6
Flammability rating: V0
Color: gray (similar to RAL 7038)
Degree of protection: IP20
Perm. ambient temperature: -25 C ... +70 C
Storage temperature: -40 C ... +85 C
Width: 6 mm (859-110), 8 mm (859-501)
Mounting position: any
Dimensions (W x H x L): (6 x 56 x 91) mm Height from upper-edge of DIN 35 rail
Wire connection: CAGE CLAMP

Cross sections: 0.08 mm
2
... 2.5 mm
2
/AWG 28 ... 14
Stripped lenghts: 5 ... 6 mm / 0.22 in
Frame to enlarge the terminal block width 859-501 1
PCB dimensions PCB dimensions
End and intermediate
plate
Push-in type jumper bar Commoning Test pin
3-way 859-403 200 (8x25)
4-way 859-404 200 (8x25)
5-way 859-405 200 (8x25)
6-way 859-406 100 (4x25)
7-way 859-407 100 (4x25)
8-way 859-408 100 (4x25)
9-way 859-409 100 (4x25)
10-way 859-410 100 (4x25)
blue ... /000-006
red ... /000-005
> <_2,9
<_____ 16,1_____><_____ 17,1_____>
<__________________ 42,2 __________________>
<__________________________ 57,3__________________________>
<____________________________________ 74,3____________________________________>
<_____16,5_____>
<_ 8,3_>
<___________28,3___________>
<
_
8
,3
_
>
<
_
8
,3
_
>
<
_
1
0
,
8
_
>
<
_
_
_
_
1
5
,1
_
_
_
_
>

4
,6
>
<
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
5
0
,1
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
>
13
7
382
DIN-Rail Mounted Enclosures
Housing 55 mm/2.17 in Pos. 1 789-120 1 Rated voltage acc. to VDE 0110 Part 1 /4.97 IEC 60664-1: 250 V /4 kV /3
Housing material: PA 6.6
Flammability rating: V0
Color: gray (similar to RAL 7038)
Perm. ambient temperature: -25 C ... +70 C
Storage temperature: -40 C ... +85 C
Mounting position: any
Dimensions (W x H x L): (17.5 x 55 x 90) mm Hight from upper-edge of DIN 35 rail
Wire connection: CAGE CLAMP

Cross sections: 0.08 mm
2
... 2.5 mm
2
/AWG 28 ... 14
Stripped lenghts: 5 ... 6 mm / 0.22 in
Top cover 55 mm/2.17 in Pos. 2 789-122 1
Transparent cover Pos. 4 789-124 1
Release mechanism Pos. 3 789-126 1
3-pole terminal block: CCC* Pos. 5 789-127 1
3-pole terminal block: COC* Pos. 5 789-128 1
3-pole terminal block: CCO* Pos. 5 789-129 1
3-pole terminal block: OCC* Pos. 5 789-130 1
3-pole terminal block: OCO* Pos. 5 789-131 1
3-pole terminal block: OOO* Pos. 5 789-132 1
3-pole terminal block: OOC* Pos. 5 789-133 1
3-pole terminal block: COO* Pos. 5 789-134 1
* C = with clamping spring, O = without clamping spring, enclosure open on the right side
PCB dimensions, horizontal mounting
* less 4.5mm when mounting a vertical PCB on level 1
PCB dimensions vertical mounting (max. PCB thickness 1.5 mm) in level 1;
(max. PCB thickness 1 mm) in level 2 and 3
Pos. 2
Pos. 5
Pos. 5
Pos. 3
Pos. 1
Pos. 4
<__________ __________>
<_________________________ _________________________>
<
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
>
<
_
_
_
_
_
_
_
_
_
_
_
_
_
_
>
> <1
29,2
50,2
4
7
,
5
*
1
9
,
5
*
<__________________35__________________>
<
_
_
_
_
1
4
,9
_
_
_
_
>
<___________________________________76,4___________________________________>
<______________________________67,25______________________________>
>

<
5
<
_
_
1
0
_
_
>
<
_
_
_
_
1
4
,9
_
_
_
_
>
<________________________54________________________>
<__________________44,85__________________>
1,2
>

<
5
<
_
_
1
0
_
_
>
<
_
_
_
_
1
4
,9
_
_
_
_
>
1,2
Level 3
Level 2
Level 1
Level 3
Level 2
Level 1
7
383
7
Push-in type jumper bars Commoning
Push-in type jumper bars uninsulated, 12-way, to be cut to the required length 789-112 100 (4x25)
Operating tool Wire connection Marking pen with fiber tip
Marking 1 ...10 (10 x) 248-502 5 cards
11 ... 20 (10x) 248-503 5 cards
21 ... 30 (10x) 248-504 5 cards
31 ... 40 (10x) 248-505 5 cards
41 ... 50 (10 x) 248-506 5 cards
1 ... 50 (2 x) 248-566 5 cards
K 1 ... K 10 (10 x) 248-450 5 cards
K 11 ... K 20 (10 x) 248-451 5 cards
K 100 (10 x) 248-452 5 cards
U 1 ... U 10 (10 x) 248-453 5 cards
U 11 ... U 20 (10 x) 248-454 5 cards
U 100 (10 x) 248-455 5 cards
7
384
Mounting Carrier for DIN-Rail Mounting PCBs
Mounting carrier size 1
Lateral cover, size 1, small, 6.35 mm /0.25 in thick 288-601 1
Fixing foot for mounting on DIN 35 rails 288-602 1
Track section, size 1, 1 m /33 long 288-600 1
In order to determine the length of a complete mounting carrier:
Length of PCB: L1
Length of track section: L2 = L1 11 mm /0.433 in
Length of mounting carrier: L3 = L1 + 1.7 mm/0.067 in
with lateral cover size 1, 6.35 mm/0.25 in thick.
Distance between PCB and upper groove of track section is 5 mm/0.197 in PCB tolerances: thickness 1.5 mm 0.2 mm, length/width 0.2 mm; -0.1/+0.3 for milling contours
Marker strips
Phillips screw 2.9 x 13* * To be used from a module length of 35 mm/1.378 in. For smaller modules
the lateral covers have to be riveted. Rivet length depends on module length.
Rivets not in the WAGO product range.
210-533 25
7.5x0.5mm on roll 5x1m, white 709-198 1
7.5x0.5mm on roll 5x1m, translucent 709-196 1
<____________ 71,2____________>
<_______________ 85 _______________>
<
_
2
5
,
2

_
>
1
1
1
2
,
7
<
<
L
2
<
_
L
3

_
>
<
_

L
1

_>
<
>
<
>
210-533
288-622
288-620
288-621
7
385
7
Mounting Carrier for DIN-Rail Mounting PCBs
Lateral cover, size 2, small*, 8.75 mm /0.344 in thick 288-621 1
Fixing foot for mounting on DIN 35 rails 288-622 1
Track section, size 2, 1 m /33 long 288-620 1
Mounting carrier size 2, with covering section
Lateral cover, size 2, big* 8.75 mm /0.344 in thick 288-626 1
Covering section, size 2, 1 m /33 long 288-627 1
In order to determine the length of a complete mounting carrier:
Length of PCB: L1
Length of track section: L2 = L1 15,8 mm/0.622 in
Length of mounting carrier: L3 = L1 + 1.7 mm/0.067 in
Length of covering section: L4 = L1
with lateral cover, size 2, 8.75 mm/0.344 in thick
Distance between PCB and upper groove of track section is 5 mm/0.197 in PCB
tolerances: thickness 1.5 mm 0.2 mm, length/width 0.2 mm; -0.1/+0.3 for milling
contours
<__________________________ 100 __________________________>
<____________________________ 106 ____________________________>
<
_
_
_

2
5
,2
_
_
_
>
<

1
5
,8
>
<
_
1
7
,5
_
>
<
_
_
_
L
2

_
_
_
>
<
_
_
_
_
_
_
_

L
3

_
_
_
_
_
_
_
>
<
_
_
_
_
_
_
_
L
1
_
_
_
_
_
_
_
>
<__________________________ 100 __________________________>
<____________________________ 106 ____________________________>
<
__
1
7

__
>
<
_
_
_
2
2
_
_
_
>
<
_
_
_
_

2
7

_
_
_
_
>
<
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
7
0

_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
>
<
_
_
_
_
_
_
_
_
_
_
4
6

_
_
_
_
_
_
_
_
_
_
>
<__________________________ 100 __________________________>
Abdeckprol
210-533
288-622
288-620
288-621
7
386
Mounting Carrier and Feet for DIN-Rail Mounting PCBs
Mounting carrier For screw-fixing or DIN-rail mounting with snap-fit type universal mounting feet
(then needs 2 x mounting feet) 288-001 1
Universal mounting foot Snap-fit type, suitable for DIN 15, 32 and 35 rails 288-002 10
Universal mounting foot Suitable for Europa card (100 x 160) mm 288-003 1
Mounting foot For screw-fixing to relay modules, holes for fixing screws 2 mm/0.079 in,
PCB hole 3.2 mm/0.126 in, distance 18 mm/0.709 in, 209-120 25
Fixing screw For mounting foot 209-120 209-119 50
Mounting foot For snap-fit mounting to relay modules, for fixing hole 3.5 mm/0.138 in,
distance 18 mm/0.709 in, for mounting on DIN 35 rail 209-188 25
>
3
<
2
3
,
5
>
<
_
_
_
3
8
,
5
_
_
_
>
<
_
_
_
_

4
2
,
5
_
_
_
_
>
(
_
1
5
_
)
<
_
_
_
_
4
5
,
5
_
_
_
_
>
<_________65,5 _________>
<__________62,5 __________>
Sockelbefestigung
mit Schraube (M 4)
Positionsanschlag
4 mm
<__________________ 42,4 __________________>
>
0,6
<___
<
_
1
0
,
7
_
>
>
4
,
6
<
>
3
,
2
<
>
6
,
4
<
<_______________34,6 _______________>
<_______18_______>
<______18______>
>
0,6
<___
<
_
1
0
,2
_
>
(_5_)
(
_
5
_)
4
,
5
3
,5

0
,0
5
<__________ 38+0,5 __________>
<__ 18 0,1__>
<_______________34,6 _______________>
<___________________ 42,4 ___________________>
xing holes
screw driver removal holes
printed circuit board
7
387
7
WAGO Application: Stockholm-Arlanda Airport,
Sweden
Automated Passenger Boarding Bridges
WAGO Products:
WAGO-I/O-SYSTEM with DeviceNet Couplers and
8
388
8
8
211 Series
WAGO Wire and Cable Marking 410 411
ProServe
Designing, Assembling and Marking 394 399
Mobile Printer, Thermal Transfer Printers and Accessories 400 403
Engraving Plotters with Engraver and Accessorie 404 407
Marking Accessories
WMB Multi Marking System, Miniature Quick Marking Card,
WMB Inline, Marker Cards and Group Marker Carriers 408
210, 249 and 209 Series
Carrier Rails 412
Accessories for Carrier Rails 413
206, 210 Series
Tools, Test and Measurement Tools 414 419
790, 791 Series
Shield (Screen) Connecting System 390 393
Accessories
8
389
Shield (Screen) Connecting System
Description and Handling
Carrier with grounding foot
45 mm/1.772 in long, busbar 90 to the rail
Item No. 790-113
for all sizes of shield (screen) clamping saddles
Using a stand off
with a special slotted carrier rail
Addition of a shield (screen) clamping saddle.
45 mm/1.772 in long, busbar parallel to the rail
Item No. 790-114
Carrier with 2 grounding feet
125 mm/4.921 in long, busbar parallel to the rail
Item No. 790-115
Tightenning/releasing a shield (screen) clamping saddle. To attach the clamping saddle, tighten the knurled screw. To remove, unscrew until ratcheted
mechanism is released, then slightly tip saddle and remove the clamping saddle.
8
390
Hole dimensions for panel mounting
Mounting Options Based on Application
carrier with grounding foot, busbar parallel to the rail isolated mounting carriers for a common shield (screen) reference potential,
independent of the housing potential
U-shaped copper busbar 10 mm (0.394 in) x 3 mm (0.118 in)
The WAGO shield (screen) connecting system is highly effective
because the clamping unit can be brought very close to the
unshielded part of the cable. Additionally, the spring material is
part of the clamping saddle, giving good electrical connection
and compensating for any deformation in the braiding. The system
also acts as a partial strain relief.
snap into any metal plate up to max. thickness 3 mm/0.118 in
<_ _>
<
_
_

_
_
>

<________ ________>
> <

>

<

<
_
_
_
_
_

>
2
1
4
4 X
Y
m
a
x
.

3
Shield (screen)
clamping saddle size
Distance X
11 mm 9.5 mm
Distance Y
19 mm 17.5 mm
27 mm 25.5 mm
43 mm 41.5 mm
MHz
100 10 1
-100
- 90
- 80
- 70
- 60
- 50
- 40
- 30
- 20
- 10
0
dB
0.1 0.01
Admissible limiting value
Negative shield (screen) attenuation
8
391
8
8
392
Shield (Screen) Clamping Saddles and Shield (Screen) Clamps
Shield (screen)
clamping saddles
Description Diameter of Connectable Conductor Item No. Pack. Unit
Shield (screen) clamping saddle,
incl. knurled screw
11 mm/0.433 in wide up to 8 mm/0.315 in 790-108 50 (5x10)
19 mm/0.748 in wide 7 mm/0.276 in to 16 mm/0.63 in 790-116 50 (5x10)
27 mm/1.063 in wide 6 mm/0.236 in to 24 m /0.944 in 790-124 50 (5x10)
43 mm/1.693 in wide 22 mm/0.866 in to 40 mm/1.575 in 790-140 50 (5x10)
Note: Not for ground connections!
Recommended tightening torque: 0.5 Nm
Assembly: The shield (screen) clamping saddle is shipped ready for direct connection to the busbar 10 mm (0.394 in) x 3 mm (0.118 in) or to a drilled mounting plate. After
connection, tighten the knurled screw to complete the installation.
Removal: To remove a shield (screen) clamping saddle, unscrew until ratcheted mechanism is released, then slightly tip saddle and remove the clamping saddle.
Assembly Removal
Installation
position delivery
Closed position Removal position
Shield (screen) clamps
Description Diameter of Connectable Conductor Item No. Pack. Unit
Shield (screen) camps H
max
40 mm, B 10 mm 1.5 mm/0.059 in to 6.5 mm/0.256 in 791-107 50
H
max
47 mm, B 17 mm 5 mm/0.197 in to 11 mm/0.434 in 791-111 50
H
max
H
max
Note: Not for ground connections!
<
_
_
_
_
_
_
_
_
_
_
_
_
_
A
_
_
_
_
_
_
_
_
_
_
_
_
_
>
(_10_)
<__B__>
(_C_)
(_C+3 _)
(_10,1_)
<__17__>
<
_
_
_
_
_
_
_
_
_
_
F
_
_
_
_
_
_
_
_
_
_
>
<__D__>
<
_
_
_
_
_
_
_
_
_
_
_
_
_
_
E
_
_
_
_
_
_
_
_
_
_
_
_
_
_
>
790-108
790-116
790-124
790-140
A
51
53
78
97
B
15
15
15
15
C
8
16
24
40
D
16
16
16
16
E
55
57
83
100
F
42
45
58
73
Dimensions in mm
Item No.
<___ _ B____>
<
_
_
_
_
_
_
_
_
_
_
_
_
_
H
m
a
x
. _
_
_
_
_
_
_
_
_
_
_
_
_
>
3
>
<
<________25________>
393
8
8
Accessories for Shield (Screen) Clamping Saddles and Shield (Screen) Clamps
Pack.
Unit
Carrier with grounding foot bar 90 to the rail, 10 mm (0.394 in) x 3 mm (0.118 in), bar a. foot Cu with tin plating, 45 mm/1.774 in long 790-113 25
Carrier with grounding foot bar parallel to the rail, 10 mm (0.394 in) x 3 mm (0.118 in), bar a. foot Cu with tin plating, 15 mm/0.591 in long 790-110 25
Carrier with 2 grounding feet bar parallel to the rail, 10 mm (0.394 in) x 3 mm (0.118 in), bar a. foot Cu with tin plating, 125 mm/4.929 in long 790-115 25
Suitable shield (screen) clamping saddle or shield (screen)
clamps for carrier with grounding foot 790-110 = 790-108;
Carrier with grounding foot 790-112 = 790-108, 790-116, 791-111, 791-117;
Carrier with grounding foot 790-114 = 790-108, 790-116, 790-124, 790-140, 791-107, 791-111, 791-117, 791-124
Carrier rail Stand off Shield termination
Carrier rail special slotted, 1000 mm/3.3 long, Cu with tin plating, special lengths on request 790-145 1
Stand off for special slotted carrier rail, use M 5 size screw 790-144 200 (2x100)
Shield termination including cable tie for shield
diameter 5 mm /0.197 in to 10 mm /0.394 in 55 mm/2.169 in long 709-350 100 (4x25)
150 mm/ 5.914 in long 709-352 100 (4x25)
Straight busbar Isolated mounting foot Isolated mounting foot U-shaped busbar
Straight busbar, 10 mm (0.394 in) x 3 mm (0.118 in), bar Cu with tin plating 1000 mm/3.3 long 210-133 20 (20x1)
30 mm/1.181 in long 790-133 20 (20x1)
50 mm/1.969 in long 790-134 20 (20x1)
Isolated mounting foot for busbar, with standard screw M 4 x 8 mm 790-100 50 (2x25)
Isolated mounting foot for busbar, with sheet metal screw (3.5 x 9) mm 790-101 50 (2x25)
U-shaped busbar, 10 mm (0.394 in) x 3 mm (0.118 in), Cu with tin plating Dimensions (W x H x L) mm; 63 x 60 x 83 790-190 25 (5x5)
Dimensions (W x H x L) mm; 100 x 60 x 118 790-191 25 (25x1)
Busbar carrier Busbar carrier, angulate
Busbar carrier for busbars, 10 mm (0.394 in) x 3 mm (0.118 in) Cu with tin plating 790-300 10
Busbar carrier, angulate for busbars, 10 mm (0.394 in) x 3 mm (0.118 in) Cu with tin plating 790-301 10
15 <_
3
>
>
<
_ 4
<_______________L _______________>
6
1
0
< >
<
>
<_____________B _____________>
<
_
_
_
_
_
H
_
_
_
_
_
>
101,3
70
1
0
5
7
,6
4
5
101,3
70
2
4
3
6
,6
1
0
WAGO ProServe

Designing, Assembling and Marking
8
394
W
A
G
O
-
I
/
O
-
S
Y
S
T
E
M

7
5
0
8
8
395
The advantages of ProServe are at your disposal every
day. With unique features such as AutoAudit accuracy
checking, ProServe performs much of the work for you,
saving time and money.
Immediate access to professional and sophisticated
features allows for error-free applications, greater
flexibility in your daily business and better customer
service. With 50 years of WAGO expertise at your
disposal, put ProServe to work for you in your next
application.
ProServe
Planning
at a New Level
Benets:
Quick design
Quick ordering
User- friendly
Extensive and user- specic
documentation
Network compatibility
Dierent software products on
a single CD (smartDESIGNER,
productLOCATOR, smartSCRIPT)
A price list is included
...all for free!
smartDESIGNER
productLOCATOR
8
396
smartDESIGNER and
productLOCATOR
Interfaces toCAE and
M-CAD programs
Output in PDF and HTML
Dierent search functions provide
quick item selection
Creation of part lists including product
pictures and custom part numbers
Complex rail assemblies can be
easily designed in 3D
Easy creation of custom part numbers
Creation of custom items to design
third- party products
Default parts (favorites) can be
dened individually, streamlining
design time
Intelligent, user- optimized accuracy
check features
18 languages available
25.000 sales items
Marking:
Direct creation and output
of marking data to plotter or
thermal transfer printer
STEP IGES
DXF DWG
CAD
8
8
397
8
398
Configuration and marking of rail
assemblies and I/O nodes, stand-alone
or combined with CAE systems.
ProServe: Planning at a New Level
Snapping:
WMB Inline markers on con-
tinuous reel can be used in
three positions:
In the center and on each
side
Combining marking strips
with individual WMB mar-
kers
Alternative:
Miniature WSB markers
can be printed on a plotter
Both custom rail assembly and marking
can be easily designed via
WAGO ProServe
Software.
Designing:
The marking strip is
snapped into the cen-
ter marker receptacle profile.
8
8
399
smartMARKING

Lxioos|vo |poti luoci|oos lto C^L sysios,
MS Office and WAGO smartDESIGNER
WSlWG ot||og
ûiooi|c p|oiiot co||btoi|oo
Lxioos|vo ||btoty |oc|uo|og ot|ot cott|ots
Sybo| ||btoty
!oxi |oogi| vot|l|coi|oo
Sovoto| |ooguogos ovo||ob|o
Ouipui ol Losi Lutopooo c|otociots
lu||y copoi|b|o w|i| LG 450 Logtovot
L|toci ouipui io i|oto| itooslot pt|oiot
Ctooi|oo ol cusio ot|ots lot
engraver/plotter
Marking strips (2009 Series) or WMB Inline
markers on continuous reel are printed on a ther-
mal transfer printer.
... for clear marking.
This makes it immediately clear which function
corresponds with each terminal block.
Printing: Three-Line Printing:
258-6000, 258-6100
400
8
Mobile Printer
DYMO RHINO 6000
Print-out preparation:
First, insert the label cartridge. To do this, open the cover on the device and in-
sert the cartridge as shown. Ensure the cartridge visibly and audibly locks into
place. The two blue catches must latch on to the top edge of the cartridge. Then
close the cover.
Turn the unit on. A query will appear in the display about setting the material
width. Select your current label width and confirm it with "OK." The unit is now
ready for use.
Note: You can also work with the unit while it is charging.
Please use the latest driver.
Download: www.wago.com under SERVICE / Download / ProServe
Pack.
Unit
DYMO RHINO 6000 Mobile Printer
Includes: Hard carrying case, AC adapter,
battery, RHINO CONNECT software and
two marking cartridges with 9 mm and
24 mm adhesive strips
258-6000 1
WAGO supplementary set for DYMO
RHINO 6000
Includes: ProServe CD, ProServe flyer and
quick installation guide for adding on to
an existing manual printer
258-6100 1
Technical Data
Resolution 180 dpi
Tape sizes 9 mm, 11 mm, 19 mm, 24 mm
(other sizes upon request)
Tape styles Permanent polyester, flexible nylon, vinyl,
heat shrink tube
Keyboard style ABC
Tape cutter yes
Shock protection yes
Memory 1000 labels (1 MB)
Symbols yes
Barcodes yes (e.g., Code 39, Code 128,
EAN 8 + 13)
Number of font styles 4
Number of font sizes 7
Number of printed lines 5
Print preview yes
PC connection USB
Display 65 mm x 35 mm
Weight 3500 g
Operating time 8 hours
Battery charge indicator yes
8
401
8
Thermal Transfer Printers
WAGO TP 343 and TP 298
Pack.
Unit
Pack.
Unit
258-343 1 258-298 1
TP 343 Thermal Transfer Printer
Resolution 300 dpi, incl. ProServe software; for 2009 and 709 Series marking strips
TP 298 Thermal Transfer Printer
Resolution 300 dpi, incl. ProServe software and 258-178 print roller for WMB Inline and
2009 and 709 Series marking strips
Printing method Thermal/thermal transfer Printing method Thermal/thermal transfer
Printhead system Thin-film transfer head Printhead system Thick-film
Print resolution 300 dpi Print resolution 300 dpi
Print speed up to 76 mm/sec. Print speed 100 mm/sec.
Print width 6 - 104 mm (0.25" - 4.09") Print width 108.4 mm
Print length up to 990 mm (39") See-through/reflective sensor standard
RAM memory 2 MB DRAM, 1 MB Flash Processor 32 Bit ColdFire/clock rate 64 MHz
Interfaces Parallel Centronics (LPT), RS-232 (COM),
USB, ETHERNET 10/100 Base T
RAM memory 8 MB RAM
Program memory 4 MB Flash
Sensors Label sensor (material end, foil end, bottom
reflective sensor)
Slot for memory card CompactFlash Type 1
Interfaces ETHERNET 10/100 Base T, RS-232
(COM), USB Other 2 cardboard cores (104 mm) for ink ribbon
rewinder; operating instructions in German
and Englisch
Accessories (optional) Cutter, external unwinder, external
rewinder, CompactFlash memory card
16-512 MB Power supply Universal power supply unit
Operating voltage 100 V ... 240 V AC /
50 Hz ... 60 Hz
Operating voltage 100 V ... 240 V AC /
50 Hz ... 60 Hz, PFC
(Length with unwinder: approx. 450 mm)
Weight 10000 g
Enclosure Double-walled plastic Operating temperature 10C ... 35C
Weight 1000 g Rel. humidity 30 % ... 85 %
Safety approvals CE, FCC Class A, UL, CUL, TUV Safety approvals CE, FCC class 1
Accessories 1 x USB cable; 1 x ETHERNET cable;
unwinder set;
marking strips (1 x 2009-110);
ink ribbon (1 x 258-145)
Accessories 1 x USB cable; 1 x serial cable;
marking strips (1 x 2009-110);
ink ribbon (1 x 258-149)
Item No.
Application table for ink ribbon/marking accessories/printer
258-143
Ink Ribbon Marking Accessories Width Printer
resin/wax Labels (paper)
Labels (paper)
for cable marking 211-155 / 211-156
Marking cards for wire marking 211-111 and 211-121
Labels (polyester) up to 76 mm
2009 Series marking strip 2009-xxx
709 Series marking strip 709-xxx
WMB Inline (not printable with TP 343)
Marking Strip Series 2009 2009-xxx
Marking Strip Series 709 709-xxx
WMB Inline (not printable with TP 343)
60 mm
100 mm
38 mm
50 mm
76 mm
resin/wax
resin
resin
resin
258-144
258-145
258-149
258-150
all types
all types
TP 298 & TP 343
TP 298+
all types
Labels (polyester) up to 100 mm 100 mm resin 258-157 all types
8
402
Accessories
Accessories for 3M PL300 Mobile Printer
Marking strips Self-adhesive marking Self-adhesive marking Heat shrink tube Heat shrink tube
Marking strips white, 11 mm width x 5.5 m 211-611
Adhesive strips white, 9 mm width x 7 m 211-612
Adhesive strips white, 19 mm width x 7 m 211-613
Heat shrink tube white, 9 mm width x 1,5 m 211-614
Heat shrink tube white, 19 mm width x 1.5 m 211-615
Accessories for TT Printer
Ink ribbon for labels Ink ribbon for marker strips
Ink ribbon for marker strips and WMB Inline resin, 38 mm x 300 m 258-145
resin, 50 mm x 300 m 258-149
Ink ribbon for cable marking 76 mm wide x 300 m 258-150
100 mm wide x 300 m 258-157
Ink ribbon for labels resin/wax, width 60 mm x 300 m 258-143
resin/wax, width 100 mm x 300 m 258-144
All ink ribbons are suitable for TP 298 and TP 343 printers. For detailed ordering information, please refer to the
"Application table for ink ribbon/marking accessories/printer"
External coil mounting system Cutter TP 298 Spare roller TP 298
External coil mounting system for 8,000 WMB Inline markers (2009-135) 258-169
Cutter TP 298 258-161
Spare roller TP 298 for labels (up to device series no. 40,000) 258-162
Spare roller TP 298 for labels (from device series no. 40,000) 258-177
Spare roller TP 298 for WMB Inline (device series no. 40,000) 258-166
Spare roller TP 298 for WMB Inline (from device series no. 40,000) 258-178
Carrying case for TP 298 258-171
Carrying case for TP 343 258-342
Retractable handle for carrying case TP 298 / TP 343 258-173
WMB Inline Marking strips
WMB Inline, pitch 4 mm, stretchable, 4 mm ... 4.2 mm, on roll white, 2,000 markers 2009-114
WMB Inline, pitch 5 mm, stretchable, 5 mm ... 5.2 mm, on reel white, 1,500 markers 2009-115
WMB Inline, pitch 5 mm, stretchable, 5 mm ... 5.2 mm, on reel white, 8,000 markers 2009-135
Marking strips for TOPJOB
S Series, white, plain, 11 mm wide 50 m coil 2009-110

Marking strips for 870, 869, 862, 270 Series
white, plain, 7.5 mm wide
50 m coil 709-178
Marking strips for 870, 869, 862, 270 Series,
transparent, plain, 7.5 mm wide
50 m coil 709-177
8
403
8
Accessories
Marker card (12 mm)
for TT Printer
Marker card (12 mm)
for plotters
Labels on roll Labels on DIN A4
sheets
Dimensions of self-laminating label
Marker card for thermal transfer printer 12 mm 211-121
23 mm 211-111
Marker card for plotter
(258-370 carrier plates are required for plotting)
12 mm 211-120
23 mm 211-110
Cable tie marker 25 x 10 mm, white, 3,500 pieces per roll 211-135
Labels on roll for thermal transfer printer Marker surface: "S"=8 mm, "B"=18 mm, "L"=35 mm for max. 9 mm cable ,
9,000 labels per roll
211-155
Marker surface: "S"=13 mm, "B"=23 mm, "L"=51 mm for max. 12 mm cable ,
5,000 labels per roll
211-156
Wire marker for thread-on mounting for 0.75 - 1.5 mm, 2,000 markers per roll 211-161
for 2.5 - 6 mm, 2,000 markers per roll 211-162
Labels on DIN A4 sheets for laser printer
70 labels per roll
211-150
32 labels per roll
211-151
Marking sleeve 12 mm, for wire 1.6 mm ... 3.2 mm or 0.25 mm ... 1.5 mm 211-112
2.2 mm ... 4.5 mm or 0.5 mm ... 4 mm 211-113
3.7 mm ... 5.9 mm or 2.5 mm ... 6 mm 211-114
4.8 mm ... 7.5 mm or 6 mm ... 16 mm 211-115
Marking sleeve 23 mm, for wire 1.6 mm ... 3.2 mm or 0.25 mm ... 1.5 mm 211-122
2.2 mm ... 4.5 mm or 0.5 mm ... 4 mm 211-123
3.7 mm ... 5.9 mm or 2.5 mm ... 6 mm 211-124
4.8 mm ... 7.5 mm or 6 mm ... 16 mm 211-125
Marking sleeve for cable tie 23 mm, for 10 mm wires and larger 211-129
Cable tie (2.5 x 100) mm 807-090/101-100
Label for I/O marking
Plotter, 12 x 7 mm 211-211
Marking strips 15 mm, white 50 m roll 210-701
Receptacle for marking strips transp. 1 m long 709-120
Carrier through element adjustable in height 709-118
Carrier end element adjustable in height 709-119
Continuous label 3 mm, white 12 lengths at 25 m 210-732
Label roll 70 x 100 mm, white 500 labels/reel 210-703
70 x 100 mm, silver 500 labels/reel 210-704
6 x 15 mm, white 3000 labels/reel 210-705
6 x 15 mm, yellow 3000 labels/reel 210-705/000-002
9.5 x 25 mm, white 3000 labels/reel 210-708
35 x 5 mm, white, 4,000 labels/roll 210-710
More labels at www.marschall-pw.de
8
404
Plotters with EG 450 Engraver
IP 350 A3 Plotter / IP 350 A4 Plotter
Pack.
Unit
Pack.
Unit
IP 350 A3 Plotter
incl. ProServe software
258-350 1 EG 450 Engraver 258-450 1
Extension module for IP 350 Flat Plotter. Consists of "EC 450" Control Unit and "VC 450"
Vacuum Cleaner, including graver 0.3 mm + 0.4 mm IP 350 A4 Plotter
incl. ProServe software
258-451 1
Plotting area 440 mm x 305 mm (258-350)
220 mm x 305 mm (258-451)
1. Engraving spindle
Speed min. 5,000 rpm, max. 50,000 rpm
Interfaces paralell (centronics); USB 1.1 Torque 6 Ncm
Language based on HP-GL 7475A Frequency 83 - 830 Hz
Data buffer 16 MB Energy consumption max. 60 W
Speed max. 400 mm/sec. Collets 3 mm shaft diameter
Drive system Two-phase stepper motor Clamping mechanism Head clamping
Pen storage unit max. 4 pens (optimum seal) Run-out with collet 0.03 mm
Plotter pen Special plotter pens with HP receptacle Motor type three-phase, asynchronous, brushless
Addressable resolution 0.01 mm Enclosure Aluminium
Repeat accuracy 0.05 mm Clamping diameter 25 mm
Repeatability after changing the pen 0.05 mm using high-quality pens Ball bearing type permanent lubrication, double
Power supply via separate desktop power supply unit
equipped with exchangeable supply line
Cooling Internal air via integrated fan
Application Engraving only
Operating voltage 120 V ... 240 V AC / 50 Hz ... 60 Hz Guaranteed bearing operation min. 1,000 hrs if handled properly
Voltage range 90 V ... 264 V AC
Current consumption (internal) 0.3 A max. at 220 V AC
Dimensions (mm) W x H x L 125 x 660 x 440 Notice: Never clean engraving spindle using compressed air, do not use
lubricants when engraving. Weight 11,069 g
Operating temperature 10C ... 35C
Rel. humidity 35 % ... 75 %
Safety approvals acc. to UL-UL1950 CSA-950/VDE
EN60950
2. VEB 500 Control Unit
Operating voltage 100 V ... 240 V AC / 50 Hz ... 60 Hz
Immunity to interference acc. to FCC Class B FCC Part 15 and VDE
Class B EN 55022 3. VC Vacuum Cleaner
Vacuum cleaner bag Type Y98
Dimensions (mm) W x H x L Control unit + vacuum cleaner (an top of
each other): 240 x 290 x 315
Weight Engraving spindle + control unit + vacuum
cleaner + accessories: 8,000 g
258-200
405
8
8
Flatbed Plotter
IP200
Rugged, aluminum construction
Plotting area, A4: 220 mm x 305 mm
Easy replacement of marker receptacles
Auto calibration
Up to 10.5 mm wide markers can be plotted
Special solutions for up to 15 mm wide markers are available
Universal power supply, 100-240 VAC
Neat plotting right from the very first marker
PC interfaces: USB ports
Command language: HPGL
IP200 firmware can be updated via PC and Internet
Pack.
Unit
IP200 Flatbed Plotter 258-200 1
Technical Data
Plotting area 200 mm x 305 mm
Interfaces USB Level 1.1
Language Based on HP-GL 7475A
Data buffer 16 MB
Speed max. 40 mm/s
Drive system Two-phase step motor
Plotter pen Special plotter pens with HP receptacle
Addressable resolution 0.01 mm
Repeat accuracy 0.05 mm
Repeat accuracy after pen change 0.05 mm with optimun pen
Power supply Separate power supply with exchangeable
plug adapters
Operating voltage 100 V ... 240 V AC / 50 Hz ... 60 Hz
Current consumption (internal) 0.7 A max. at 220 V AC
Operating temperature 10 C ... 35 C
Rel. humidity 35 % ... 75 %
Safety approvals EN 60950-1
Immunity to interference EN 55022 B
Included: IP200 Plotter, power supply, USB data
cable, operating manual + ProServe
software
8
406
WAGO plotter pen
(disposable)
0.18 mm line width
WAGO plotter pen
(disposable)
0.25 mm line width
WAGO plotter pen
(disposable)
0.35 mm line width
Service kit Graver set
WAGO plotter pen 0.18 mm line width 258-226
0.25 mm line width 258-227
WAGO ink cartridges black, for permanent marking, not refillable (5 x 1 ml) 258-141
WAGO plotter pen (disposable) 0.18 mm line width 258-326
Cover 258-146
Service kit (4 spare pen stations) 258-147
WAGO cleaning set suitable for cleaning all EKS Pens 258-139
WAGO pen cleaner 258-140
Calibration aid 258-453
Graver set 0.2/0.3/0.4/0.5/0.7/1.0 mm line width 258-452
Graver 0.2 mm graver width 258-452/000-002
0.3 mm graver width 258-452/000-003
0.4 mm graver width 258-452/000-004
0.5 mm graver width 258-452/000-005
0.7 mm graver width 258-452/000-007
1.0 mm graver width 258-452/000-010
Vacuum cleaner bag for Engraver EG 450 258-457
Graver (stainless steel) 0.2 mm graver width 258-458/000-002
0.4 mm graver width 258-458/000-004
WAGO plotter pen (disposable, black) 0.18 mm line width, for inside marking only 258-426
0.25 mm line width, for inside marking only 258-427
WAGO plotter pen (disposable, red) 0.18 mm line width, for inside marking only 258-426/000-005
0.25 mm line width, for inside marking only 258-427/000-005
WAGO plotter pens are suitable for any kind of smooth surfaces. No additional adapter is required.
8
407
8
Marker card carrier plates for plotter IP 350
Carrier plates for marker cards WSB 5 mm/0.197 in (209-501) 258-361
WSB 4 mm/0.157 in (209-701) 258-362
Miniature WSB (248-501) 258-363
WCB (249-200) 258-366
WMB 5/5.2 mm (793-5501); WMB 4/4.2 mm (793-4501) 258-368
T-marking strips (209-290) 258-365
Marker strips (2009-110 + 2009-130 and 790-...) 258-410
WTB (799-501) 258-367
Group marking carriers (209-112) 258-364
Marker tags (209-199 + 209-200) 258-369
Carrier plates for murrplastik MP-400; KS 4/12, 4/18, 4/23, 4/30 258-370
MP-401; KES, KLG, KMR, KPX, KS 15x17/27/49/67, KSA, KSF, KSI, KSK, KSO, KSS, KTE, KWI, SKS,
WGO, KAB 258-371
BS 5/6 258-397
KSEX; 10/500 258-470
KPX 258-396
KSEX; 18/500 258-471
Universal engraver and plotter carrier plates 90 mm x 100 mm x 3 258-454
60 mm x 100 mm x 4 258-455
30 mm x 100 mm x 9 258-456
Carrier plates for Phoenix ZBM 258-372
ZB 258-373
ZBN 258-374
ZBFM 258-375
BNZ 258-377
BN-ZB 258-378
SS-ZB 258-379
LBHZ 258-380
PAB 258-381
GPE 258-382
Universal engraver and plotter carrier plates DIN A4 258-383
DIN A3 258-472
Carrier plates for Weidmller MC Universal 258-387
MC SF4-6 258-388
Carrier plates for Wrtz/Allen Bradley Universal 258-389
Carrier plates for Mller XB M22-XST 258-390
Carrier plates for Partex PA+1 258-391
PA+2 258-392
Carrier plates for ABB Entrelec Universal 258-394
Siemens SPS 258-473
Carrier plates for Conta-Clip Universal 258-398
PK2 PVC 258-393
PA+ 2 258-399
8
408
Marking System
WMB Multi marking system
Miniature quick marking
card
Colored marker cards WMB Inline
Description Item No. Item No. Pack. Unit
WMB Multi marking system for terminal block width 3.5 mm plain 793-3501 5 cards
WMB Multi marking system for terminal block width 4 - 4.2 mm,
strechable 4 - 4.2 mm
plain 793-4501 5 cards
WMB Multi marking system for terminal block width 5 - 17.5 mm,
strechable 5 - 5.2 mm
plain 793-5501 5 cards
Miniature WSB quick marking system for terminal block width 5 - 17.5 mm plain 248-501 5 cards
WSB Quick marking system for module width 5 - 17.5 mm plain 209-501 5 cards
Item number suffix for colored marker cards yellow .../000-002 5 cards
red .../000-005 5 cards
blue .../000-006 5 cards
gray .../000-007 5 cards
orange .../000-012 5 cards
light green .../000-017 5 cards
green .../000-023 5 cards
violet .../000-024 5 cards
WMB Inline, pitch 4 mm, stretchable, 4 mm ... 4.2 mm, on roll white, 2,000 markers 2009-114
WMB Inline, pitch 5 mm, stretchable, 5 mm ... 5.2 mm, on roll white, 1,500 markers 2009-115 1 Coil
WMB Inline, pitch 5 mm, stretchable, 5 mm ... 5.2 mm, on roll white, 8,000 markers 2009-135 1 Coil
Separation of a strip from the WMB Marker card Stretching of a strip, stretchable from 4 mm up to 4.2 mm, stretchable from 5 mm up to 5.2 mm
Group marker carrier
249-118 height-adjustable group marker carrier for
end stops
209-112 group marker carrier for 788 Series relay
sockets with pluggable miniature switching relay
Height-adjustable group marker carrier
(43.5 mm ... 60 mm), for end stops 249-116
and 249-117
for 1 marker or self-adhesive label and transparent
protection cover
249-119 1 50 (2x25)
for 2 WSB Quick markers or 1 x continuous marking strip 249-118 2 100 (4x25)
with marker surface 41 mm/1.61 in, 6 mm/0.23 in wide 249-120 50 (2x25)
Group marker carrier for up to 3 WMB markers, 15 mm/0.591 in wide 209-140 3 50 (2x25)
Group marker carrier for snapping into screwless end stops, 10 mm/0.394 in wide 209-112 4 100 (2x50)
Marker card from white cardboard, for self-marking, 100 markers per sheet 209-113 5 1 (1x1)
Protection cover transparent 209-114 6 50 (1x50)

409
8
8
WAGO Wire and Cable Marking
Wire marking
Cable marking
The following marker cards are available:
Marker cards for plotter marking ...
Remove the rest of the card by twisting it off
... or marker cards on roll
for thermal transfer printing
Slide the marker card into the marking sleeve receptacle.
Changing the marking is also
possible after the wire has been connected
Fix the 211-129 marking sleeve using cable ties to
individual wire or cable
Self-laminating labels are available on A4 sheets
for the laser printer (plotter)
or are supplied on roll for the thermal transfer
printer
Remove the printed label from the sheet or roll and wrap
it around the wire or cable.
The transparent laminate protects the marking
8
410
8
411
8
WAGO Wire and Cable Marking
Marking sleeve 12 mm Marking sleeve 23 mm Marking sleeve 23 mm, for cable tie
Marking sleeve 12 mm, for wire 1.6 mm ... 3.2 mm or 0.25 mm ... 1.5 mm 211-112 2000
2.2 mm ... 4.5 mm or 0.5 mm ... 4 mm 211-113 2000
3.7 mm ... 5.9 mm or 2.5 mm ... 6 mm 211-114 1000
4.8 mm ... 7.5 mm or 6 mm ... 16 mm 211-115 1000
Marking sleeve 23 mm, for wire 1.6 mm ... 3.2 mm or 0.25 mm ... 1.5 mm 211-122 2000
2.2 mm ... 4.5 mm or 0.5 mm ... 4 mm 211-123 2000
3.7 mm ... 5.9 mm or 2.5 mm ... 6 mm 211-124 1000
4.8 mm ... 7.5 mm or 6 mm ... 16 mm 211-125 1000
Marking sleeve for cable tie 23 mm, for wires from 10 mm 211-129 1000
Cable tie (2.5 x 100) mm 807-090/101-100 1000
Marker card (12 mm)
for Printer
Marker card (12 mm)
for Plotter
Marker card (23 mm)
for Printer
Marker card (23 mm)
for Plotter
Marker card for TT Printer 12 mm 211-121 1
23 mm 211-111 1
Marker card for Plotter 12 mm
(258-370 Carrier Plates are required for plotting)
211-120 30
23 mm
211-110 18
Labels on roll Labels on DIN A4 sheets Dimensions of self-laminating label
Labels on roll for thermal transfer printer Marker surface "S"=8 mm, "B"=18 mm, "L"=35 mm for max. cable 9 mm,
9.000 labels per roll
211-155 1
Marker surface "S"=13 mm, "B"=23 mm, "L"=51 mm for max. cable 12 mm,
5.000 labels per roll
211-156 1
Labels on DIN A4 sheets for laser printer
70 labels per roll
211-150 20
32 labels per roll
211-151 25
8
412
Carrier Rails
Steel carrier rail
acc. to EN 60715
Steel carrier rail Steel carrier rail
acc. to EN 60715
Item No. Pack. Unit Item No. Pack. Unit Item No. Pack. Unit
Steel rail, I
N
76 A (referred to a length of 1 m)
35 x 7.5 mm, 1 mm/0.039 in thick, 2 m long, unslotted
Steel rail, I
N
35 x 15 mm, 1.5 mm/0.059 in thick, 2 m long, unslotted
Steel rail, I
N
210-113 10 210-114 10 210-118 10
Hole width 25 mm; hole spacing 36 mm, slotted Steel rail, I
N
35 x 15 mm, 1.5 mm/0.059 in thick, 2 m long, slotted 210-112 10
Hole width 18 mm; hole spacing 25 mm, slotted 210-197 10
210-115 1
Steel carrier rail
galvanized
Copper carrier rail Aluminum carrier rail
Steel rail,
35 x 7.5 mm, 1 mm/0.039 in thick, 2 m long, unslotted
Aluminum carrier rail, I
N
76 A (referred to a length of
1 m)
35 x 8.2 mm, 1.5 mm/0.059 in thick, 2 m long, unslotted
Angled support bracket,
without screw
210-505 1 210-148 10
35 x 7.5 mm, 1 mm/0.039 in thick, 2 m long, slotted 210-196 20 Screw M 5 x 8
210-504 1 210-149 100
210-506 1
35 x 15 mm, 1.5 mm/0.059 in thick, 2 m long, slotted
210-508 1
<____ 35 ____>
<___ 27 ___>
>

7
,
5

<
>

<
_
1
<_

36_> (_25_)
>

<
5
,
2
20001,5
<____ 35 ____>
<___ 27 ___> 2000 1,5
>

<
_
1
1
5
(
_
1
5
_
)
>

<
_
1
,
5
2000 1,5
<____ 35 ____>
<__ 24__>
>

<
_
1
1
5
(
_

1
5

_
)
_
_
_
_
_
>

<
2
,
2
-
2
,
5
<____ 35 ____>
<___ 27 ___>
>

7
,
5

<
>

<
_
1
20001,5
>

<
_
1
_
_
_
_
_
>

<
<____ 35 ____>
<__ 24 __>
2
,
2
-
2
,
5
(
_
1
5
_
)
1
5
<____ 35 ____>
<__ 28,2 __>
>

<
1
1
5
>

<
_
1
,
6
8
,
2
20001,5
8
413
8
Accessories for Carrier Rails
End stop for DIN 35 rail
End stop width 6 mm / 0.236 in
Angled support bracket Rail end cap,
for DIN 35 rail (7.5 mm/0.29 in high)
End stop, for DIN 35 rail
6 mm/0.236 in wide
Angled support bracket,
without screw
Rail end cap,
for DIN 35 rail (7.5 mm/0.29 in high)
249-116 100 (4 x 25) 210-148 10 209-109 50
End stop, for DIN 35 rail Screw M 5 x 8
249-117 50 (2 x 25) 210-149 100
Snap on - Thats it!
Assembling the WAGO screwless end stops is as simple
and quick as snapping a WAGO railmounted terminal
block onto the rail.
Without any tools!
This way rail-mounted terminal blocks are safely secured at
low cost against any mouvement on all carrier rails DIN 35
acc. to DIN EN 50022 (35 x 7.5 mm; 35 x 15 mm).
Entirely without screws!
The secret of the excellent tight fit lies in the two small
clamping plates which keep the end stop in position, even if
the rails are mounted vertically.
Simply snap on - and forget!
In addition, costs are considerably reduced when using
large numbers of end stops.
A further advantage is that three marker receptacles for all
WAGO marker systems for rail-mount terminal blocks and a
snap-in hole for WAGO adjustable height group marker
carriers offer individual marking possibilities.
Snap on ...
... that's it!!
<___ 45 mm/1.77 in ___>
<
_

2
8

m
m
/

_
_
>

1
.
1

i
n
7
M 5
3
5
<___ 60 ___>
<______ 72 ______>
<
_
_
4
8
_
_
>

>
1
8

<
8
414
Operating tool
Operating tool
with partially insulated shaft
for optimum handling of terminal blocks
Operating tool
with partially insulated shaft
Set
Operating tool
with partially insulated shaft, short
for optimum handling of terminal blocks
Operating tool, with partially insulated shaft,
type 1, blade (2.5 x 0.4) mm
Set
Operating tool, type 1, short, straight blade
(2.5 x 0.4) mm, with partially insulated shaft
210-719 1 210-722 1 210-647 1
Operating tool, type 2, short, straight blade
210-720 1 210-657 1
Operating tool, type 1, short, angled blade
210-721 1 210-648 1
Operating tool, type 2, short, angled blade
210-658 1
Wiring example showing
WAGO-I/O-SYSTEM 750
The operating tool are particularly appropriate for the
operation of front-entry terminal blocks and connectors.
(The picture shows the WAGO-I/O-SYSTEM 750)
8
415
8
Cable Strippers
Cable stripper
for round cables with an outer diameter
from 2.5 mm to 11 mm
Cable stripper
Item No. Pack. Unit Item No. Pack. Unit
Cable stripper
Cable stripper
206-171 1 206-174 1
Spare blade for 2.5 mm to 11 mm Spare blade for 4.5 mm to 40 mm
206-170 1 206-173 1
206-171 Cable Stripper:
10-position adjustment wheel ensures repeatable
stripping results
Fine adjustability via 10-position blade cutting depth
adjustment
Strips the sheath from multi-core and fiber optic cables
up to 11 mm/0.43 inch diameter
Safe and easy to use through closed stripping cavity
206-174 Cable Stripper:
Safe and easy to use: Three locking positions for
circular, longitudinal and spiral cuts
High cable stripping capacity of up to 40 mm/1.57
inch diameter
Well balanced, ergonomic design features rests for
thumb, index and pinky fingers to ease raising of the
cable retention hook
Replacement blades can be stored within the tool body
Handling instructions for 206-171 cable stripper
Handling instructions for 206-174 cable stripper
8
416
Wire Strippers
Microstrip wire stripper
0.14 mm ... 1.5 mm/AWG 24 ... 16 "solid" and
"stranded"
Wire cutter up to 1.5 mm/AWG 16 "solid" and
"stranded"
Quickstrip 10 wire stripper
0.02 mm ... 10 mm/AWG 28 ... 8 "stranded"
(6 mm/AWG 10 "solid")
Wire cutter up to 10 mm/AWG 8 "stranded"
(1.5 mm/AWG 16 "solid")
Quickstrip 16 wire stripper
4 mm ... 16 mm
Wire cutter up to 10 mm/AWG 12 ... 6 "stranded"
(1.5 mm/AWG 16 "solid")
Microstrip wire stripper Quickstrip 10 wire stripper Quickstrip 10 wire stripper
206-501 1 206-124 1 206-125 1
Spare stripping
complete
Standard blade cassette
0.02 mm ... 10 mm/AWG 34 ... 8
Blade cassette 16 mm
4.0 mm ... 16 mm/AWG 12 ... 6
206-502 1 206-126 1 206-128 1
Spare blade for wire cutter "V" blade cassette
0.02 mm ... 4 mm/AWG 34 ... 12 for PTFE 206-503 1
206-127 1
Automatic adjustment to wire size.
No damage to wire strands.
Gripping pressure of jaws adjusts automatically to wire
insulation diameter.
Full cycle strip - jaws open after stripping, ensures no
nicked strands.
Exact strip length may be set by sliding of red setting
stop.
Replaceable stripping jaw assembly.
Self-sharpening, fully protected wire cutter, also
replaceable.*
Glass fiber reinforced polyamide tool body.
* for Microstrip Cutting of wire. Stripping of wire.
Operating instructions are enclosed in the packaging.
8
417
8
Cable Cutter and Crimping Tools
Cable cutter acc. to VDE
for copper and aluminum wires
up to 35 mm/AWG 2
Weight 200 g
Variocrimp 4 Crimping Tool
0,25 mm
2
- 4 mm
2
/ AWG 22 - 12
Weight 400,5 g
Variocrimp 16 Crimping Tool
6 mm
2
- 16 mm
2
/ AWG 10 - 6
Weight 579,5 g
Cable cutter Variocrimp 4 crimping tool, for insulated and
uninsulated ferrules, crimping range of 0.25 4 mm
2
Variocrimp 16 crimping tool, for insulated and
uninsulated ferrules, crimping range of 6 16 mm
2
206-118 1
206-204 1 206-216 1
Application notes
With Variocrimp 4, the built-in crimping pressure
control automatically adjusts force to the conductor
cross section used.
With Variocrimp 16, it is necessary to select the wire
gauge on the tool before crimping.
Only one crimping station is needed to handle the
specified conductor size range.
Uniform, compact crimping on all four sides for high
conductor retention.
No need to center the conductor into the ferrule.
Conductor and ferrule insertion possible from both sides
(for left- and right-handers).
Built-in ratchet mechanism ensures gas-tight crimp
connection.
Crimping tools open automatically after crimping
operation is complete.
Ergonomical handles.
Cutting A perfect gastight crimp, both electrically and
mechanically reliable.
What is a gas-tight connection?
In a gas-tight connection, the conductor and the ferrule are compressed together, eliminating all spaces. Under normal
atmospheric conditions, neither a liquid nor a gaseous medium can penetrate into the crimped connection.
Oxidation between crimped single conductors is prevented, ruling out nearly any increase in the crimped connection
resistance. In some exceptional cases, minute, isolated spaces may be present. These can be considered to be closed off
on account of the twisted wires, however.
Inadequate crimping can allow the conductor to be pulled out of the connection. Hollow spaces also remain in which
oxidation can form. Oxidation leads to an increase in contact resistance.
Elevated resistance is detrimental for signal transmission, as the signal flow is damped (weakened), and for power
transmission, as power loss and, hence a temperature increase due to contact (risk of fire) can result.
Crimping tools with built-in ratchets are recommended, such as the WAGO Variocrimp tools. These tools only open after
the crimping process has been fully completed. Space-saving crimping from all four sides is ideal for spring clamp
termination.
Cross section data for ferruled conductors indicated for WAGO products is based on this crimping method.
8
418
Test and Measurement Tools
WAGO Profi LCD+
2-pole voltage tester with LCD display
6 - 1000 V AC/DC
WAGO Profi LED+
2-pole voltage tester with LED display
6 - 1000 V AC/DC
WAGO Profi LCD+
2-pole voltage tester with LCD display
Measuring range: 6 V ... 1000 V AC/DC
Resistance measurement: up to 2000 ,
removable test probes, 4 mm
WAGO Profi LED+
2-pole voltage tester with LED display
Measuring range: 6 V ... 1000 V AC/DC,
Resistance measurement: up to 2000 ,
removable test probes, 4 mm
206-807 1 206-806 1
Replacement test probes, 4 mm (2 pcs) Replacement test probes, 4 mm (2 pcs)
206-808 25 206-808 25
Additional product features for WAGO Profi LCD+:
Automatic measurement range selection
Single-pole phase testing AC >100 V
Two-pole sequence testing (R and L)
Continuity testing
FI/RCD testing (30 mA) via buttons
One-hand operation for SCHUKO and CEE sockets
LED torch lamp function
Automatic backlight
Auto power-off function
CAT IV 1000 V
TV/GS tested and approved
IEC/EN 61243-3 (DIN VDE 0682-401)
Additional product features for WAGO Profi LED+:
Automatic measurement range selection
Single-pole phase testing AC >100 V
Two-pole sequence testing (R and L)
Continuity testing
FI/RCD testing (30 mA) via buttons
One-hand operation for SCHUKO and CEE sockets
CAT IV 1000 V
IEC/EN 61243-3 (DIN VDE 0682-401)
WAGO Profi LCD+ and WAGO Profi LED+
- Improved socket contact via 4 mm test probes
- Removable test probes for small test ports (suitable for all
WAGO terminal blocks)
8
419
8
WAGO Multi Tester
Digital multimeter
600 V AC/DC
10 A AC/DC
WAGO Amp Tester
Digital clamp meter
0.01 - 200 A AC/DC
Testboy
WAGO Multi Tester
Digital multimeter with contact-less voltage tester
Measuring range: 600 V AC/DC
10 A AC/DC
Resistance measurement: up to 20 M
Includes: carrying case
WAGO Amp Tester
Digital clamp meter
Measuring range: 0.01 A ... 200 A AC/DC
True RMS measuring method
Includes: carrying case
Testboy,
with integrated flashlight
Voltage range 120 V to 1000 V AC
206-810 1 206-815 1 206-804 1
Item No. Pack. Unit
Replacement test leads, red/black
206-811 1
Additional product features for WAGO Multi Tester:
Contact-less voltage test AC >100 V (optical and
acoustical)
Resistance measurement up to 20 M
Acoustical continuity test
Diode test
Data hold function
CAT IV 600 V
IEC/EN 61010-1 (DIN VDE 0411)
Additional product features for WAGO Amp Tester:
AC and DC current measurement
True RMS measurement
Data hold function
Maximum jaw opening: 21 mm
Compact design for measuring in tight spaces
Resolution: 0.01 A at 40 A
Resolution: 0.1 A at 200 A
Sampling rate: 3 times per second
CAT III 300 V
IEC/EN 61010-1 (DIN VDE 0411)
A device that will reliably detect AC voltage in cables,
sockets, fuses, switches, outlets, etc.
The voltage tester detects:
Live conductors
Cable breaks
Blown fuses
Defective switches
Defective lamps
9
420
WAGO Application: Opdenho Technologie GmbH
in Hennef, Germany
Control Systems for Weighing, Mixing and
Conveyance of Bulk Material and Liquids
WAGO Products:
WAGO-I/O-SYSTEM with PROFIBUS Couplers,
9
9
9
421
Technical Section
Technical Support 422 423
CE Marking and EC Directives 424
General Technical Information for Electrical Equipment
in Hazardous Environments 425
Electromagnetic Compatibility and Mechanical Strength
(Industrial- and Residential Areas) 426
(Ship Building Area) 427
Specifications and Test Results 428 431
Electrical Engineering Laboratory:
Product Safety for Our Customers 432 433
WAGO Online, eBooks, DVD AUTOMATON 434 435
WAGO Seminars 436 437
Product Support From
Your national WAGO company
or distributor.
Contact
Consulting Services
So|oci|oo ol i|o l|o|obus
0so ol copoooois
Cob|ooi|oo ol copoooois
Coopotoi|oo w|i| oi|ot
suppliers
9
422
The Very Beginning...
Experienced
!to|ooo sioll
lLC & lC cooito|
Mu|i|p|o l|o|obusos
ltogto|og |ooguogos
ltoocis.
Automotive industry
Moc||oo bu||o|og
C|o|co| |oousity
Food processing
Building automation
Process engineering
Process control
and many more
We will help you
ltoouci oocuooioi|oo
Moouo|s
^pp||coi|oo ooios
y io|op|ooo
Oos|io
9
9
423
CE conformity marking:
!|o CL coolot|iy ot||og coos|sis ol i|o
c|otociots "CL, w|i| i|o lo||ow|og sct|pi.

Couooui Lutopoooo [Lutopooo
Couo|iy}
!|o CL ot||og s|o|| bo oll|xoo io i|o
o|ocit|co| ou|pooi, ot |l i|oi |s ooi pos
s|b|o, io i|o so||osi poc||og uo|i. W|i|
i|o CL ot||og, ooulociutots oiiosi coo
lot|iy ol i|o|t ptooucis io i|o to|ovooi
directives.
lo ooo|i|oo io i|o CL ot||og, i|o oou
lociutot ptov|oos oo LC Loc|otoi|oo
ol Coolot|iy lot i|o ptoouci. !||s LC
Loc|otoi|oo ol Coolot|iy usi bo toio|
ned and submitted to a national surveil
|ooco oui|ot|iy upoo touosi. LC o|toci|
vos oto b|oo|og |ogo| togu|oi|oos ol i|o
Lutopooo Couo|iy. !|o|t goo| |s i|o
|otoo|zoi|oo ol |ogo| ooo oo|o|sitoi|vo
togu|oi|oos |o i|o vot|ous LC obot sio
ios, |o otoot io ptovooi itooo obsituci|oos
ouo io o|llotooi ooi|ooo| togu|oi|oos.
lo otoot io ot|oi o ptoouci, |i usi
cop|y w|i| i|o to|ovooi o|toci|vos. !|o
ptoouci oy bo suboci io sovoto| o|toc
i|vos, o.g. i|o LMC ooo i|o |ow vo|iogo
directives.
The EC directives are legally binding
spoc|l|coi|oos ol i|o Lutopooo 0o|oo.
!|o|t o| |s i|o o||goooi ol |ogo| ooo
oo|o|sitoi|vo spoc|l|coi|oos |o i|o vot|ous
LC obot sioios, |o otoot io ptovooi
itoo|og ||ootoocos ot|s|og lto o|llotooi
ooi|ooo| spoc|l|coi|oos.
In order to launch a product on the
ot|oi |i |os io cop|y w|i| i|o to|ovooi
directives. Several directives may apply
io o ptoouci, lot oxop|o i|o LMC ooo
i|o |ow vo|iogo o|toci|vos.
2006/95/EC
Low Voltage Directive
!|o soloiy ol o|ocit|co| ou|pooi |s
guotooiooo by i|o Low \o|iogo L|toci|vo.
This directive covers complete electrical
ou|pooi oos|gooo lot uso w|i| o vo|
iogo toi|og ol boiwooo 50 ooo 1000\
lot o|iotooi|og cuttooi ooo boiwooo 75
ooo 1500\ lot o|toci cuttooi. ltooucis
lo|||og w|i||o i|o scopo ol i|o Low \o|
iogo L|toci|vo i|oi oto oos|gooo |o suc|
o woy i|oi i|oy coo bo usoo |o oi|ot
o|ocit|co| oov|cos ooo w|oso soloiy, lot
i|o osi poti, |s oopoooooi oo |ow i|oso
copoooois woto bu||i |oio i|o ooo pto
ouci ooo w|oi looiutos i|o ooo ptoouci
|os oto ool|ooo os bos|c copoooois |o
occotoooco w|i| i|o Low \o|iogo L|toc
i|vo.* !|o Low \o|iogo L|toci|vo oooso'i
apply to basic components.
2004/108/EC
EMC Directive
!|o LMC L|toci|vo |p||os i|oi o pto
ouci usi ooi i|o |||is ol i|o too|oioo
electromagnetic disturbance and also
requires that a product must be immune
io o|ocitoogooi|c |oiotlotooco. L|oc
tromagnetic passive components or
copoooois w|i| oo o|toci luoci|oo, |||o
tos|siots, o|ooos, copoc|iots, sw|ic||og
to|oys ot cob|os [|o i|o lot ol poss|vo
pt|oioo c|tcu|i bootos} oto ooi coos|ootoo
os oppotoius w|i||o i|o ooo|og ol i|o
LMC L|toci|vo.

Machinery Directive
!|o Moc||ooty L|toci|vo ooos ooi opp|y
to WAGO products.
94/9/EC Ex Protection Directive,
ATEX 100a
Goooto| ioc|o|co| |olotoi|oo lot o|oc
trical equipment in hazardous environ
ments.
CE Marking and EC Directives
9
424
1
2
2
1
l|ooso tolot io i|o oouo|s lot oto |olotoi|oo oo oxp|os|oo ptoioci|oo.
General Technical Information for Electrical Equipment in
Hazardous Environments
Zone 22
Looo 21
Looo 20
Harzardous Environments
Hazardous environments are areas in
w||c| i|o oiosp|oto oy bocoo
oxp|os|vo. Lxp|os|vo oiosp|oto |s
ool|ooo os o |xiuto ol |go|iob|o
subsioocos |o i|o lot ol gosos,

vopots ot |xiutos w|i| o|t uooot
atmospheric conditions in critically
|xoo toi|os suc| i|oi oxcoss|vo ||g|
iopotoiuto, otcs ot spot|s oy couso
oo oxp|os|oo.
LlN LN 11271 ooo o|| oi|ot to|oioo
siooootos i|oi oto cooo|y |oowo
divide up hazardous areas according
io i|o |||o|||ooo ol i|o occuttooco ol oo
oxp|os|vo oiosp|oto |oio i|o lo||ow|og
zooos.
Hazardous environments as a result
ol cobusi|b|o gosos, vopots ot |si.
Zone 0:
Atoo |o w||c| oo oxp|os|vo gos,o|t |x
ture is continuously present or
ptosooi lot |oog pot|oos.

Zone 1:
Atoo |o w||c| oo oxp|os|vo
atmosphere can occur during normal
operation.

Zone 2:
Atoo |o w||c| oo oxp|os|vo
oiosp|oto |s uo|||o|y io occut uooot
ooto| opotoi|oo ooo |l |i ooos |i w|||
bo lot o s|oti pot|oo.
Hazardous areas caused by
combustible dust
Zone 20:
^too |o w||c| oo oxp|os|vo ousiy
oiosp|oto |s ptosooi potooooi|y,
lot |oog pot|oos ot ltouooi|y ooo
|o w||c| oopos|is ol cobusi|b|o ousi
ol uo|oowo ot oxcoss|vo i||c|ooss oy
bo lotoo. Lusi oopos|is o|ooo oto ooi
gtouoos lot c|oss|l|coi|oo os Looo 20.
Zone 21:
oiosp|oto |s ptosooi occos|ooo||y
under normal operating conditions and
|o w||c| oopos|is ot |oyots ol
combustible dust can generally be
present.
Zone 22:
oiosp|oto |s ooi |||o|y io occut out|og
ooto| opotoi|oo ooo, |l |i occuts, w|||
oo|y ox|si lot o s|oti pot|oo, ot |o w||c|
occuu|oi|oos ot |oyots ol cobusi|b|o
dust are present.
Zone 2
Looo 1
Looo 0
Looo 0 Looo 0
Looo 1
9
9
425
(Industrial and Residential Areas)
Mechanical strength acc. to IEC 61131-2 (2007)
Test Specication Frequency Range Limit Values
lLC 0082 vibration 5 z l < 9 z 1.75 op||iuoo [potooooi}
2.5 op||iuoo [s|oti iot}
9 z l < 150 z 0.5 g [potooooi}
1 g [s|oti iot}
Noio oo v|btoi|oo iosi.
o} ltouoocy c|oogo. ox. 1 ociovo,|ouio
b} \|btoi|oo o|toci|oo. 2 oxos
lLC 008227 s|oc| 15 g
Noio oo s|oc| iosi.
o} !ypo ol s|oc|. |o|l s|oo
b} S|oc| outoi|oo. 11 s
c} S|oc| o|toci|oo. 2x |o pos|ivo ooo 2x |o oogoi|vo o|toci|oo
lot ooc| ol i|o i|too uiuo||y potpooo|cu|ot oxos ol i|o iosi
specimen
Emission of interference for residential areas acc. to EN 61000-6-3 (2007)
Test Specication Limit Values/ Frequency Range Distance
Quasi Peak
LN 550121 ^C supp|y, coooucioo ... 5 o[\} 150 |z ... 500 |z
LN 550112 5 o[\} 500 |z ... 5 Mz
0 o[\} 5 Mz ... 20 Mz
LN 550121 LC supp|y, 79 o[\} 150 |z ... 500 |z
LN 550112 ooio, coooucioo 72 o[\} 500 |z ... 20 Mz
LN 550122 radiated 20 o[\,} 20 Mz ... 220 Mz 10
27 o[\,} 220 Mz ... 1 Gz 10
LN 55022 !o|ocouo|coi|oos, 84 ... 74 o[\} 150 |z ... 500 |z
Mo|os cooooci|oo 74 o[\} 500 |z ... 20 Mz
Emission of interference for industrial areas acc. to EN 61000-6-4 (2007)
Quasi Peak
LN 550121 ^C supp|y, coooucioo 79 o[\} 150 |z ... 500 |z
LN 550112 72 o[\} 500 |z ... 20 Mz
LN 550122 radiated 40 o[\,} 20 Mz ... 220 Mz 10
47 o[\,} 220 Mz ... 1 Gz 10
LN 55022 !o|ocouo|coi|oos, 97 ... 87 o[\} 150 |z ... 500 |z
Mo|os cooooci|oo 87 o[\} 500 |z ... 20 Mz
Immunity to interference for industrial areas acc. to EN 61000-6-2 (2005)
Test Specication Test Values Evaluation Criteria *)
LN 100042 LSL 4 |\,8 |\ [cooioci,o|t} B
LN 100042 electromagnetic elds 10 \,. 80 Mz ... 1 Gz A
2\,. 1.4 Gz ... 2.0 Gz A
1\,. 2.0 Gz ... 2.7 Gz A
LN 100044 burst 1 |\,2 |\ [ooio,supp|y} B
LN 100045 surge Loio. , 1 |\ [||oo . ||oo , ||oo . ooti|} B
LC supp|y. 0.5 |\ , 0.5 |\ [||oo . ||oo , ||oo . ooti|} B
^C supp|y. 1 |\ , 2 |\ [||oo . ||oo , ||oo . ooti|} B
LN 10004 RF distrurbances 10 \, 80 ^M [0.15 Mz ... 80 Mz} A
LN 100048 Mogooi|c lo|o 20 ^, 50,0z A
*} Ct|iot|o ^. !|o oov|co usi wot| |o occotoooco w|i| i|o togu|oi|oos out|og ooo oliot i|o iosi.
Ct|iot|o . !|o oov|co usi wot| |o occotoooco w|i| i|o togu|oi|oos oliot i|o iosi.
9
42
(Ship Building Area)
Immunity to interference acc. to Germanischer Lloyd (2003)
Test Specication Test Values Evaluation Criteria *)
lLC 100042 LSL |\,8 |\ [cooioci,o|t} B
lLC 100042 electromagnetic elds 10 \, 80 Mz ... 2 Gz A
lLC 100044 burst 1 |\ ,2 |\ [ooio,supp|y} A
lLC 100045 sutgo, LC supp|y 0,5 |\ ,1 |\ [||oo . ||oo , ||oo . ooti|} A
sutgo, ^C supp|y 0,5 |\ ,1 |\ [||oo . ||oo , ||oo . ooti|} A
lLC 10004 RF distrurbances 10 \ 80 ^M [0.15 ... 80 Mz} A
Type Test ^l o|situtboocos [|otoo|c wovos} 2 \, 2 W A
Type Test high voltage 755 \ LC
1500 \ ^C
*} Ct|iot|o ^. !|o oov|co usi wot| |o occotoooco w|i| i|o togu|oi|oos out|og ooo oliot i|o iosi.
Ct|iot|o . !|o oov|co usi wot| |o occotoooco w|i| i|o togu|oi|oos oliot i|o iosi.
Emission of interference acc. to Germanischer Lloyd (2003)
Quasi Peak
Type Test LMC 1, coooucioo 9 ... 50 o[\} 10 |z ... 150 |z
[o||ows lot s||p bt|ogo 0 ... 50 o[\} 150 |z ... 250 |z
cooito| opp||coi|oos} 50 o[\} 250 |z ... 20 Mz
Type Test LMC 1, too|oioo 80 ... 52 o[\,} 150 |z ... 200 |z 3 m
[o||ows lot s||p bt|ogo 52 ... 24 o[\,} 200 |z ... 20 Mz 3 m
cooito| opp||coi|oos} 54 o[\,} 20 Mz ... 2 Gz 3 m
oxcopi lot. 24 o[\,} 15 Mz ... 15 Mz 3 m
Type Test LMC 2, coooucioo 120 ... 9 o[\} 10 |z ... 150 |z
[o||ows lot oc||oo too 79 o[\} 150 |z ... 250 |z
opp||coi|oos} 72 o[\} 250 |z ... 20 Mz
Type Test LMC 2, too|oioo 80 ... 50 o[\,} 150 |z ... 20 Mz 3 m
[o||ows lot oc||oo too 0 ... 54 o[\,} 20 Mz ... 100 Mz 3 m
opp||coi|oos} 54 o[\,} 100 Mz ... 2 Gz 3 m
oxcopi lot. 24 o[\,} 15 Mz ... 15 Mz 3 m
Mechanical strength acc. to Germanischer Lloyd (2003)
Test Specication Frequency Range Limit Values
lLC 0082 v|btoi|oo [coiogoty ^, C} 2 z l < 12,2 z 1.0 ^p||iuoo [potooooi}
12.2 z l < 100 z 0.7 g [potooooi}
lLC 0082 v|btoi|oo [coiogoty ^L} 2 z l < 25 z 1. ^p||iuoo [potooooi}
25 z l < 100 z 4 g [potooooi}
9
9
427
Specifications and Test Results

lo poti|cu|ot i|o lo||ow|og siooootos opp|y
io i|o oos|go ooo i|o opp||coi|oo ol i|o
iot|oo| b|oc|s ooo coooociots cooio|ooo |o
i||s coio|og.
LlN \LL 0100.198211
Coosituci|oo ol ||g| cuttooi |osio||oi|oos
w|i| oo|oo| vo|iogos up io 1000\
LN 501101.2004
\LL 01051.20050
Opotoi|oo ol o|ocit|co| |osio||oi|oos
lLC 1140.2001,^1.2004 [oo|loo}
LN 1140.2002,^1.200
\LL 01401.200702
ltoioci|oo ogo|osi o|ocit|c s|oc| Cooo
ospocis lot |osio||oi|oo ooo ou|pooi
lLC 041.2007
LN 041.2007
\LL 01101.200801
losu|oi|oo cooto|ooi|oo lot ou|pooi w|i||o
|owvo|iogo sysios loti 1. lt|oc|p|os,
requirements and tests
lLC 02041.2005 [oo|loo}
LN 02041.200
\LL 01121.20070
Soloiy ol oc||ooty L|ocit|co| ou|pooi
ol oc||oos loti 1. Goooto| tou|tooois
LN 50178.1997
\LL 010.199804
L|ocitoo|c ou|pooi lot uso |o powot
installations
lLC 22051.200
LN 22051.200
\LL 01852051.20010
ltoioci|oo ogo|osi ||g|io|og loti 1.
General principles
lLC 0001.1989
cott|gooou Motc| 1990
L 588.1 S1.1991
\LL 04221.19940
|g| vo|iogo iosi ioc|o|uos, poti 1.
general specications and test
requirements
lLC 0085.2007
LN 0085.2008
\LL 02011.200808
L|ocit|co| |osu|oi|oo !|oto| ovo|uoi|oo
and designation
lLC 0529.1989 ^1.1999
LN 0529.1991 ^1.2000
\LL 04701.200009
Logtoos ol ptoioci|oo ptov|ooo by
ooc|osutos [ll cooo}
lLC 0021.1991 ^1.1992
LN 0021.1998
Coooociots lot ltouooc|os bo|ow 2 Mz
lot uso w|i| pt|oioo bootos loti 1. Gooot|c
spoc|lcoi|oo. Goooto| tou|tooois ooo
gu|oo lot i|o ptopotoi|oo ol ooio||
spoc|lcoi|oos, w|i| ossossoo uo||iy
lLC 1984.2001
LN 1984.2001
\LL 027.200209
Coooociots Soloiy tou|tooois ooo iosis
lLC 09991.1999
LN 09991.2000
\LL 0091.200012
Cooooci|og oov|cos L|ocit|co| coppot
cooouciots, Soloiy tou|tooois lot
sctowiypo ooo sctow|ossiypo c|op|og
uo|is loti 1. Goooto| tou|tooois ooo
poti|cu|ot tou|tooois lot c|op|og uo|is
lot cooouciots 0.2 up io 25
lLC 0172.199
LN 0172.199
Gtop||co| sybo|s lot o|ogtos
loti 2. Sybo| o|ooois, uo||ly|og
symbols and other symbols having
general application
lLC 15581.2005
LN 15581.2005
\LL 05701.20007
Soloiy ol powot itooslotots, powot
supp||os, toociots ooo s|||ot ptooucis
loti 1. Goooto| tou|tooois ooo iosis
lLC 0921.2002
LN 0921.2004
\LL 02221.200508
Sw|ic|os lot |ouso|o|o ooo s|||ot lxoo
o|ocit|co| |osio||oi|oos loti 21. loti|cu|ot
tou|tooois L|ocitoo|c sw|ic|os
lLC 094771.2002
Cott|gooou 1.2002
LN 094771.2002
\LL 0111.200207
Lowvo|iogo sw|ic|goot ooo cooito|goot
loti 71. ôc|||oty ou|pooi !ot|oo|
b|oc|s lot coppot cooouciots
lLC 099822.2002, oo|loo
LN 099822.2004
\LL 01222.200502
Cooooci|og oov|cos lot |owvo|iogo c|tcu|is
lot |ouso|o|o ooo s|||ot putposos loti
22. loti|cu|ot tou|tooois lot cooooci|og
oov|cos os sopotoio ooi|i|os w|i| sctow|oss
type clamping units
lLC 09471.2007
LN 09471.2007
\LL 00100.200804
loti 1. Goooto| tu|os
lLC 09475.1999
LN 09475.2000
\LL 00212.200012
loti 5. Cooito| c|tcu|i oov|cos ooo
sw|ic||og o|ooois, LC |oiotloco lot
ptox||iy soosots ooo sw|ic||og op||lots
[N^M0k}
lLC 04291.1999 ^1.2004
LN 04291.1999 ^1.2004
\LL 00500.200501
ossob||os loti 1. !ypoiosioo ooo
poti|o||y iypoiosioo ossob||os
lLC 05551.1982 1si oo|i|oo
LN 0555 poti 1, oo|i|oo 1987
\LL 08281.19870
L|siutboocos |o supp|y sysios cousoo by
household appliances and similar electrical
ou|pooi, poti 1. oolo|i|oos
lLC 0715.1981 ^1.1995
LN 0715.2001
L|oos|oos ol |owvo|iogo sw|ic|goot ooo
cooito|goot Siooooto|zoo ouoi|og oo
to||s lot oc|oo|co| suppoti ol o|ocit|co|
oov|cos |o sw|ic|goot ooo cooito|goot
installations
lLC 09501.2005, oo|loo
LN 09501.200
\LL 08051.20011
lolotoi|oo ioc|oo|ogy ou|pooi Soloiy
loti 1. Goooto| tou|tooois
lLC 0127.1994 ^1.199
^2.2002
LN 0127.1994 ^1.199 ^2.2002
\LL 0820.200210
M|o|oiuto lusos loti . luso|o|oots lot
|o|oiuto luso||o|s
9
428
LN 50155.2007
\LL 0115200.200802
ko||woy opp||coi|oos L|ocitoo|c ou|pooi
usoo oo to|||og sioc|
LN 5009022.199 Cott|gooou.1997
^1.2002 ^2.2007
\LL 082922.200711
oo ooo u||o|og L|ocitoo|c Sysios
[LS} loti 22. Sysio ovotv|ow
General technical requirements;
German version
lLC 00991.1991 ^1.1999
LN 00991.1994 ^1.1999
\LL 0751.200008
Sutgo ottosiots loti 1. Noo||ooot tos|siot
iypo goppoo sutgo ottosiots lot o.c. sysios
lLC 1421.1998 Cott|gooou 1998,
modied
LN 14211.2002 ^11.2007
\LL 07511.200708
Lowvo|iogo sutgo ptoioci|vo oov|cos
loti 11. Sutgo ptoioci|vo oov|cos coooocioo
io |owvo|iogo powot sysios
Requirements and tests
lLC 14221.2000 Cott|gooou.
2001
LN 14221.2001
\LL 084521.200202
Low vo|iogo sutgo ptoioci|vo oov|cos
loti 21. Sutgo ptoioci|vo oov|cos coooocioo
to telecommunications and signalling
ooiwot|s, lotlotooco tou|tooois ooo
testing methods
lLC 15081.1998 Cott|gooou 1999
LN 15081.2001
\LL 08021.200211
luoci|ooo| soloiy ol o|ocit|co|,o|ocitoo|c,
ptogtoob|o o|ocitoo|c soloiyto|oioo
sysios loti 1. Goooto| tou|tooois
lLC 201.2005
LN 201.2005
\LL 011250.200510
Soloiy ol oc||ooty luoci|ooo| soloiy
ol soloiyto|oioo o|ocit|co|, o|ocitoo|c ooo
programmable electronic control systems
Interfaces - Fieldbuses
LlN 2591.198105
L|ocit|co| c|otociot|si|cs lot uobo|oocoo
ooub|ocuttooi |oiotc|oogo c|tcu|is
LN 502251.2002
Industrial communications subsystem based
oo lSO 11898 [C^N} lot cooito||otoov|co
|oiotlocos loti 1. Goooto| tou|tooois
lLC 17841.2007
LN 17841.2008
loousit|o| couo|coi|oo ooiwot|s ltol|os
loti 1. l|o|obus ptol|os
lLC 11582.2007
LN 11582.2008
loousit|o| couo|coi|oo ooiwot|s
l|o|obus spoc|lcoi|oos loti 2. l|ys|co|
layer specication and service denition
lLC 1158x
LN 1158x
LlN LN 1158x
loousit|o| couo|coi|oo ooiwot|s
l|o|obus spoc|lcoi|oos loti x
Explosion Protection
lLC 00790.2004, oo|loo
LN 00790.200
\LL 01701.200705
L|ocit|co| oppotoius lot oxp|os|vo gos
oiosp|otos loti 0. Goooto| tou|tooois
lLC 00797.200
LN 00797.2007
\LL 0170.200708
Lxp|os|vo oiosp|otos loti 7. Lu|pooi
ptoioci|oo by |octoosoo soloiy o
lLC 007911.200
LN 007911.2007
\LL 01707.200708
Lxp|os|vo oiosp|otos loti 11. Lu|pooi
ptoioci|oo by |oit|os|c soloiy |
lLC 007914.2007
LN 007914.2008
\LL 0151.200905
Lxp|os|vo oiosp|otos loti 14. L|ocit|co|
|osio||oi|oos oos|go, so|oci|oo ooo otoci|oo
lLC 007915.2005
LN 007915.2005
\LL 01701.20005
L|ocit|co| oppotoius lot oxp|os|vo gos
oiosp|otos loti 15. Coosituci|oo, iosi
ooo ot||og ol iypo ol ptoioci|oo o
electrical apparatus
lLC 12410.2004, oo|loo
Cott|gooou Nov. 2005
LN 12410.200
\LL 0170150.200707
L|ocit|co| oppotoius lot uso |o i|o ptosooco
ol cobusi|b|o ousi loti 0. Goooto|
requirements
lLC 12411.2004
LN 12411.2004
\LL 0170151.20050
ol cobusi|b|o ousi loti 1. ltoioci|oo by
ooc|osutos iL
lLC 124111.2005
Cott|gooou lobtuoty 200
LN 124111.200
\LL 01701511.200707
ol cobusi|b|o ousi loti 11. ltoioci|oo by
|oit|os|c soloiy |L
9
9
429
Specifications and Test Results (continued)

Environmental Testing
lLC 0082.2007
LN 0082.2008
\LL 0482.200810
Lov|tooooio| iosi|og loti 2. !osis
!osi lc. \|btoi|oo [s|ouso|oo|}
lLC 008227.1987
LN 008227.1992
os|c oov|tooooio| iosi|og ptocooutos
loti 2. !osis, iosi Lo ooo gu|oooco. S|oc|
lLC 008242.2002
LN 008242.2002
!osi Kc. Su|p|ut o|ox|oo iosi lot cooiocis
and connections
lLC 008242.2002
LN 008242.2002
!osi Ko. yotogoo su|p||oo iosi lot cooiocis
and connections
EMC Requirements
lLC 10001.2005
LN 10001.2007
\LL 08291.200710
L|ocitoogooi|c copoi|b|||iy [LMC}
loti 1. Gooot|c siooootos luo|iy lot
tos|oooi|o|, cootc|o| ooo ||g|i|oousit|o|
environments
lLC 10002.2005
LN 10002.2005
\LL 08292.20002
loti 2. Gooot|c siooootos luo|iy lot
industrial environments
lLC 10002.200
LN 10002.2007
\LL 08292.200709
loti 2. Gooot|c siooootos L|ss|oo
siooooto lot tos|oooi|o|, cootc|o| ooo
||g|i|oousit|o| oov|toooois
lLC 10004.200
LN 10004.2007
\LL 08294.200709
loti 4. Gooot|c siooootos L|ss|oo
siooooto lot |oousit|o| oov|toooois
lLC 100022.2005
LN 100022.200
\LL 08282.20010
loti 22. L||is L||is lot |otoo|c cuttooi
o|ss|oos [ou|pooi |opui cuttooi 1 ^
pot p|oso}
lLC,ClSlk 11.2002 ^1.2004,
oo|loo ^2.200
LN 55011.2007 ^2.2007
\LL 087511.200711
loousit|o| sc|ooi|lc ooo oo|co| [lSM} too|o
ltouoocy ou|pooi
L|ocitoogooi|c o|siutbooco c|otociot|si|cs
L||is ooo oi|oos ol oosutoooi
lLC,ClSlk 22.2005, oo|loo ^1.2005
LN 55022.200 ^1.2007
\LL 087822.200805
lolotoi|oo ioc|oo|ogy ou|pooi koo|o
o|siutbooco c|otociot|si|cs L||is ooo
oi|oos ol oosutoooi
lLC,ClSlk 24.1997, oo|loo ^1.2001
^2.2002
LN 55024.1998 ^1.2001 ^2.2002
\LL 087824.200210
lolotoi|oo ioc|oo|ogy ou|pooi
luo|iy c|otociot|si|cs L||is ooo
oi|oos ol oosutoooi
lLC 12221.2008
LN 12221.2008
\LL 08422021.200811
L|ocit|co| ou|pooi lot oosutoooi,
cooito| ooo |obotoioty uso LMC
tou|tooois loti 21. luo|iy
tou|tooois lot soloiyto|oioo sysios ooo
lot ou|pooi |oiooooo io potlot
soloiyto|oioo luoci|oos [luoci|ooo| soloiy}
General industrial applications

9
420
PLC
lLC 11211.2002
LN 11211.2002
ltogtoob|o cooito||ots
loti 1. Goooto| |olotoi|oo
lLC 11212.2007
LN 11212.2007
\LL 0411500.200804
loti 2. Lu|pooi tou|tooois ooo iosis
lLC 11212.2002
LN 11212.2002
loti 2. ltogto|og |ooguogos
Relays
lLC 18101.2008
LN 18101.2008
\LL 0425201.200902
L|ocitooc|oo|co| o|oooioty to|oys
loti 1. Goooto| tou|tooois
lLC 18102.2005
LN 18102.2005
\LL 0425120.20001
L|ocitooc|oo|co| o|oooioty to|oys
loti 2. ko||ob|||iy
lLC 18105.1998
LN 50205.2002
\LL 04252022.200201
L|ocitooc|oo|co| ooospoc|loo i|o
o||otooi||og to|oys loti 5. losu|oi|oo
coordination
lLC 02555.2000
LN 02555.2001
\LL 0425120.200112
L|ocit|co| to|oys loti 5. losu|oi|oo
cooto|ooi|oo lot oosut|og to|oys ooo
ptoioci|oo ou|pooi kou|tooois ooo
tests
UL Directives
0L 1059, ^NSl 1059.200112
!ot|oo| b|oc|s
0L 48L.200905
Lu|pooi w|t|og iot|oo|s lot uso w|i|
o|u|ou ooo,ot coppot cooouciots
0L 508.199901
Industrial control equipment
^NSl,lS^12.12.01.2007
Noo|ocooo|vo o|ocit|co| ou|pooi lot uso
|o C|oss l ooo C|oss ll, L|v|s|oo 2 ooo C|oss
lll, L|v|s|oos 1 ooo 2 |ozotoous [c|oss|loo}
locations
Ship Classications
^S [ôt|coo utoou ol S||pp|og}
Sioo| \osso|s 2008
loti 4. \osso| Sysios ooo Moc||ooty
\ [utoou \ot|ios}
ku|os lot i|o c|oss|lcoi|oo ol sioo| s||ps ooo
oshore units
LN\ [Loi Nots| \ot|ios}
Loi Nots| \ot|ios' ku|os lot C|oss|lcoi|oo ol
S||ps, |g| Spooo & L|g|i Ctoli ooo
Loi Nots| \ot|ios' OFs|oto Siooootos.
2007
GL [Gotoo|sc|ot L|oyo} 2002
ku|os lot C|oss|lcoi|oo ooo Coosituci|oo
VI Additional Rules and Guidelines
7 Gu|oo||oos lot i|o lotlotooco ol !ypo
Test
2 !osi kou|tooois lot L|ocit|co|,L|ocitoo|c
Lov|cos ooo Sysios
Lk [L|oyos kog|siot} 2002
Type Approval System
!osi Spoc|lcoi|oo Nubot1199
klN^ [kog|sito lio||ooo Novo|o}
ku|os lot i|o c|oss|lcoi|oo ol s||ps
loti C - Moc||ooty, sysios ooo lto
ptoioci|oo C|.2, Soci., !ob|o1
Lo|i|oo 2008
S [loooto| Mot|i|o ooo yotogtop||c
^goocy} 2005
Coti|lcoio oo oosutoooi ol solo o|siooco
to the standard magnetic and steering
ogooi|c coposs |o occotoooco w|i| lSO
k 95 ooo LlN LN 0945 Soci|oo 11.2
Kk [Kotooo kog|siot ol S||pp|og}
L|si ol ^pptovoo Mooulociutots ooo !ypo
^pptovoo Lu|pooi, li. , C|. 1, Soc. 2 ol
i|o ku|os lot C|oss|lcoi|oo ol Sioo| S||ps
NKK [N|ppoo Ko|| Kyo|o|} Lo|i|oo 2009
Gu|oooco lot i|o ^pptovo| ooo !ypo
^pptovo| ol Moiot|o|s ooo Lu|pooi lot
Mot|oo 0so
lkS [lo|s|| koosit Sioi|ow} 2002
lub||coi|oo No. 11,l
Lov|toooio| !osis oo Mot|oo Lu|pooi
9
9
421
9
432
The WAGO laboratory in Minden is an accredited test lab for electrical and mechanical tests on terminal
blocks and connectors, as well as for environment simulations.
Accreditation, as ISO/IEC 17011:2004 denes, is a third party-attestation related to a conformity assessment
body conveying formal demonstration of its competence to carry out specic conformity assessment tasks.
Accreditation, according to DIN EN ISO/IEC 17025, is granted by the Deutsche Akkreditierungsstelle GmbH
DAkkS (German Accreditation Oce GmbH DAkkS). This national accreditation oce, which was established
by the German Federal Ministry for Economics and Technology (BMWi), certies that our test laboratory is
ocially recognized as possessing the necessary expertise to conduct dened tests and types of tests indepen-
dently and objectively.
Through obtaining the accreditation, the following objectives were achieved:
Cusioot tou|tooois
Wot|low opi||zoi|oo
C|oot|y oolooo ptocossos
C|oot otgoo|zoi|oo ooo situciuto
Greater transparency
Coos|siooi, ||g|uo||iy |obotoioty iosi|og
Mox|u itocoob|||iy
!tocoob|o oosutoooi tosu|is
Susio|oob|o uo||iy owotoooss
Conductor reten-
tion force testing
Vibration- and
shock-resistance
testing
Electrical Engineering Laboratory:
Product Safety for Our Customers
Visitor center
High-voltage test
9
433
9
9
434
WAGO online
You want to get informed on our products
quickly and conveniently?
You want more information on our
company? No problem!
At www.wago.com you will nd a wealth
of information on WAGO:
lolotoi|oo oo out copooy
!|o |oiosi ptoouci oows
!|o oowosi oouo|s, ooio s|oois,
brochures and yers in dierent formats
Loios lot i|o ooxi so|oots,
|olotoi|oo ovoois, tooos|ows, itooo
fairs and much more...
We are continuously working on improving
i|o sotv|co soci|oo ol out wobs|io. lo ooo|i|oo
to product documentation and information
tosoutcos [|o boi| lLl ooo oboo| lotoi},
software downloads are also available from
this section.
ll you |ovo ooy uosi|oos oo o poti|cu|ot
iop|c, p|ooso uso out co||boc| sotv|co ooo
we will call you back whenever it is
convenient for you.
Koop upioooio. \|s|i us oo||ool
www.wago.com
Keep up-to-date.
Visit us online!
9
435
9
Start: index.html
Release 2012/03-021
No. 0888-0412/0021-0101
www.wago.com
AUTOMATION
Tools and Docs
by W
AGO. This work is protected by copyright. All rights reserved by the ow
ner a
nd
p
ro
d
u
c
e
rs. A
n
y
u
n
a
u
th
o
riz
e
d
c
o
p
y
in
g
, h
irin
g
, le
n
d
in
g
o
r p
u
b
l i c
p
e
r f o
r m
a
n
c
e
o
f t h
i s
D
V
D
i s p
r o
h
i b
i t e
d
.
Rel. 021
2012/03-021
AUTOMATION Tools and Docs
eBooks
lo i|o sotv|co soci|oo ol out wobs|io, you w||| loo i|o |oiosi ptoouci coio|ogs ooo btoc|utos os |oiotoci|vo
ooo|s. ^ sootc| ooo zoo luoci|oo o||ows you io u|c||y loo oxoci|y w|oi you oto |oo||og lot.
!|o oyoo|c cooiooi o|os |oolog i|toug| i|o pogos uc| oos|ot, ooo |l you ptolot o |otocopy, s|p|y
print out the pages you want to read.
lo ooo|i|oo io i|o |oiosi ioc|o|co| oocuooioi|oo, i||s
L\LkOM o|so cooio|os out ^0!OM^!lON ptoouci
catalogs and brochures as interactive eBooks.
!|o ioc|o|co| oocuooioi|oo |oc|uoos s|oti oosct|pi|oos,
opp||coi|oo ooios, ooio s|oois ooo oouo|s lot o|| out
^0!OM^!lON ptooucis.
Specic information resources on our electronic
copoooois coo bo v|owoo |o lLl lotoi. ll you oto
to|uciooi io |ool i|toug| oss|vo coio|ogs, you coo o|so
btowso o|| ^0!OM^!lON coio|ogs uoo btoc|utos os
ooo|s, ol coutso, w|i| sootc| ot |oywoto luoci|oo.
lo ooo|i|oo, o|| W^GOl,OSS!LM soliwoto ptooucis
[w||c| coo o|so bo louoo oo out wobs|io} coo bo o|toci|y
|osio||oo lto i|o L\LkOM.
L\L AUTOMATION !oo|s ooo Locs
9
436
WAGO Seminars Learn Today
Benefit Tomorrow
Experience has shown that
practice makes perfect. The focus
of every WAGO training seminar
is on practical, hands-on learning.
No question goes unanswered
and no one is overlooked in
WAGO training courses made
up of small groups.
Learning is effective in a group.
Ideas can be discussed and ex-
changed while experiences can
be shared all for the benefit of
the participants.
Innovative ideas and advanced technology are
the driving forces behind the development and
creation of WAGOs market-leading products.
Maximize the benefits of WAGO products
through optimal application knowledge
gained at WAGO training seminars. The skills and
expertise gained in our effective, user-oriented pre-
sentations will save you time and help you use our
products to their fullest capacity.
Product-related and customer-specic training seminars
Setting the Bar with Your Goals
Practical Topics Small Groups Teamwork
9
437
9
WAGO Seminars
Efficient and Practical Training
Current sem
inars at:
www.wago.com/seminare
Special
com
pany sem
inars
Product-Related Seminars
In addition to these open seminars, we also offer customer-spe-
cific courses as company seminars to address your companys
particular needs.
Upon request, we can also conduct these courses at your location.
We regularly offer product-related training courses on the
following:
Building and industrial automation
Programming of automation components
Fieldbus systems
WAGO Seminars Experience the benets
of rst-hand knowledge and expertise
straight from the source!
Your instructor is a specialist and knows all the ins
and outs of the topic. Carefully developed, each
WAGO training seminar ensures that every minute
spent is an eective investment of your expertise.
Request your registration form by e-mail:
training@wago.com
Contact Your Local
WAGO Company.
Customer-Specic Training Seminars
10
438
10
10
10
439
Index
Item Number Index
WAGO Locations
Index 440 445
Item Number Index 446 451
WAGO Locations Worldwide 452 453
Catalog
Catalog (Page)
Catalog Catalog
1 = Full Line Catalog Volume 1 (Rail-Mounted Terminal Block Systems), 2 = Full Line Catalog Volume 2 (Connectors and PCB Terminal Blocks)
3 = Full Line Catalog Volume 3 (I/O-SYSTEM), 4 = Full Line Catalog Volume 4 (Interface Modules), 5 = Full Line Catalog Volume 5 (WINSTA
)
f.-e. = front-entry, s.-e. = side-entry
Catalog (Page) Catalog (Page)
Catalog (Page)
A
Actuator and actuator LED terminal blocks
rail-mounted terminal blocks 1
Actuator cables 3
Additional modules for matrix patchboards 1
Addressing tool 3
Alu Plus contact paste 1, 2
Analog input modules 3
Analog output modules 3
Analog signal conditioning modules
- pluggable 4(278-280)
AND gate modules
- pluggable 4(146)
Angled female connectors
see MULTI CONNECTION SYSTEM, 100%
protected against mismating, classic/standard
version 2
Angled support brackets 1, 3
Antenna (SMA plug) 4(374), 3
Approvals 1, 2, 3
Approvals for WAGO-I/O-SYSTEM 3
AS-Interface master module 3
AS-Interface switch mode power supply 4(320), 3
Assembly tools for 294 Series 1
B
Back-up capacitor module 4(351), 3
BACnet congurator 3
Banana plugs 1
Binary spacer module 3
Bipolar isolation amplier 4(224)
Bistable relays
- DIN-rail-mountable 4(107)
- pluggable 4(121)
Block I/O SYSTEM 3
Bluethooth I/O module 3
Bridge rectiers 4(142-143)
Building automation 3
Bus coupler units for KNX/EIB applications 2
Busbar terminal blocks 1
C
Cable assemblies
- WINSTA
MINI 5
- WINSTA
MIDI 5
- WINSTA
RD 5
- WINSTA
KNX 5
Cable assembly 3
Cable marking 4(410-411), 1, 3
Cable stripper 4(415), 1, 2, 3, 5
Cables and connectors 3
Cables and connectors for eldbus systems 3
Cables, pre-assembled
WINSTA
MINI 5
WINSTA
MIDI 5
WINSTA
RD 5
WINSTA
KNX 5
CAGE CLAMP
connection 4(2), 1, 2, 3
CAGE CLAMP
S connection 4(2), 1, 2, 3
CAL
eldbus components 3
CANopen
eldbus components 3
Carrier rails 4(412), 1, 2, 3
C
Carrier terminal blocks, f.-e. 1
- double-deck, triple-deck terminal blocks 1
X-COM
S-SYSTEM-MINI 1
TOPJOB
S 1
X-COM
-SYSTEM 1
X-COM
S-SYSTEM 1
CC-Link eldbus connector 3
CC-Link eldbus coupler 3
CE marking 4(426), 1, 2, 3
Chassis-mount terminal strips 1
Coding keys 2
Coding pin, WINSTA
5
Coding, WINSTA
5
Collective carrier for jumpers 1
Combi PCB terminal blocks 2
Combi strips 2
Comb-style jumper bars 1, 2
Comb-style jumper bars 2
Commissioning software 4(268), 3
Common potential matrix patchboards 1
Commoning strips for PCB terminal blocks 2
Compact block terminal blocks 1
COMPACT PUSH WIRE
connectors for junction

boxes 1
Compact splicing for exible conductors 1
Compact terminal blocks, see Miniature (rail-moun-
ted) terminal blocks
Companies and representatives
WAGO worldwide 4(452-453), 1, 2, 3, 5
Computer marking 4(394-408), 1, 3
Condition monitoring 3
Conguration cables 4(269), 3
Conguration les 3
Connecting cables 3
Connecting system, 10- or 20-pole 2
Connection cables 3
Connection modules 4(208-209)
sensors 4(208)
actuators 4(209)
Connection of aluminum conductors 1
Connectors
- wire-tap branch; 3- and 6-pole (elevator shaft
technology) 2
- for KNX/EIB applications 2, 5
- 10- or 20-pole connectors for racks 2
- for PCBs 2, 5
- High-current 1
- MULTI CONNECTION SYSTEM 2
TOPJOB
S 1
- WINSTA
5
- X-COM
-SYSTEM 1
Connectors for junction boxes 1
Constant voltage sources
- DIN-rail-mountable 4(242-243), 3
Control panel 3
Covers for rail-mounted terminal blocks 1
Crimping tools for ferrules 1, 2
CT/VT terminal blocks
see Disconnect/Test terminal blocks
Current ow monitoring modules
Current-carrying capacity curves
- PCB terminal blocks 2
- X-COM
-SYSTEM 1
- MULTI CONNECTION SYSTEM
D
DALI/DSI master module 3
Data exchange coupler 3
Data exchange module 3
DC drive controller 3
DC/DC converter
- Rail-mounted terminal block 4(348-349)
Decade marker carrier 1
Decentralized building automation 3
Delta jumpers 1
Derating curves
see current-carrying capacity curves
MULTI CONNECTION SYSTEM 2
Device connectors
- WINSTA
MINI 5
- WINSTA
MIDI 5
DeviceNet
eldbus components 3
Dierencial inputs and dierential measurement
inputs
see Analog input modules 3
Digital impulse interface 3
Digital input modules 3
Digital output modules 3
Diode double-deck terminal blocks, f.-e. 1
TOPJOB
S 1
Diode gate modules
- DIN-rail-mountable 4(210-211)
- pluggable 4(145)
Diode modules, for carrier or through terminal
blocks, pluggable 1
Diode terminal blocks, f.-e. 1
TOPJOB
S 1
Diode triple-deck terminal blocks, f.-e. 1
TOPJOB
S 1
Direct printing
- MICRO 2
- MINI 2
- MIDI 2
- MAXI 2
Disconnect terminal blocks, f.-e.,
- angled type
with pivoting knife disconnect 1
- horizontal type
Double-deck terminal blocks 1
with disconnect tab 1
Disconnect/Test terminal blocks, f.-e.
- angled type
for use with voltage transformer circuits or current
transformer circuits 1
- horizontal type
with pivoting knife disconnect 1
TOPJOB
S 1
with pivoting disconnect link 1
Disconnect/Test terminal blocks, s.-e. 1
Disconnection tools for 294 Series 1
Distribution box, WINSTA
5
Distribution cables (sensor/actuator) 3
Distribution connector, WINSTA
- MINI 5
- MIDI 5
- KNX 5
Distribution installation terminal blocks
see also Multilevel installation terminal blocks
Distribution terminal blocks, f.-e.
see TOPJOB
multilevel installation terminal blocks

TOPJOB
S 1
DLL MODBUS
/TCP software 3
Documentation 4(434-435), 3
Double pin headers
see MULTI CONNECTION SYSTEM MIDI
Index
10
440
Catalog Catalog Catalog
Catalog (Page) Catalog (Page) Catalog (Page)
D
Double-deck headers
Double-deck Terminal Blocks, f.-e. 1
TOPJOB
S 1
diode terminal blocks, LED terminal blocks 1
TOPJOB
S 1
Double-deck terminal strips for PCBs 2
Double-potential terminal blocks, f.-e. 1
TOPJOB
S 1
for matrix patching 1
Down counter see Up/down counters
D-Sub eldbus connector 3
DVD AUTOMATION Tools and Docs 4(435), 3
E
e-Books 4(435), 3
EC directives 4(426), 1
EDS les see Conguration les
for building custom circuits 4(378-379)
for rail-mounted terminal blocks 4(380)
Empty housings
Rail-mounted terminal block empty housings 4(381)
Enclosures for WAGO-I/O-SYSTEM 750 3
End module 3
End stops
- for DIN 15 rail 1
- for DIN 35 rail 4(413), 1, 3
Engraving plotter with engraver 4(404-405), 3
EnOcean radio switching receiver 4(272), 3
EnOcean radio technology 4(370-371), 3
EnOcean switches 4(374), 3
EPSITRON
PRO power supplies 4(293-309), 3

CLASSIC power supplies 4(310-320), 3
ECO power supplies 4(290-292), 3
Electronic circuit breakers 4(328-330), 3
Uninterruptible power supplies (UPS)
4(321-327), 3
Capacitive buer modules 4(334-335), 3
Redundancy module 4(336-337), 3
Communication cable RS-232 4(338), 3
ETHERNET eldbus components 3
ETHERNET eldbus connector 3
Ex e II
Double- and triple-deck terminal blocks, f.-e.
TOPJOB
S 1
Double-potential terminal blocks, f.-e. 1
Through terminal blocks, f.-e.
- angled type 1
TOPJOB
1
TOPJOB
S 1
- horizontal type 1
TOPJOB
S 1
Modular terminal blocks and terminal strips with
xing anges or mounting feet
- f.-e. 1
- s.-e. 1
PCB terminal blocks 2
Miniature through terminal blocks, f.-e. for DIN 15
rail and DIN 35 rail 1
MINI ground conductor terminal blocks for DIN 15
and DIN 35 rails 1
Ex i
Fieldbus modules 3
Terminal blocks see Through terminal blocks
Ex Technical information 4(425), 1, 3
Extended input voltage and temperature range
4(48)
F
Feedthrough pluggable connectors for PCBs
see MULTI CONNECTION SYSTEM 2
Feedthrough terminal strips
for PCB 2
Felt-tip pen 4(49), 1, 2, 3
Female and male connectors
see Connectors, for ex. for racks
Female PCB connectors 2
Female PCB terminal blocks 2
Female plugs
see MULTI CONNECTION SYSTEM 2
X-COM
-SYSTEM 1
X-COM
S-SYSTEM-MINI 1
X-COM
S-SYSTEM 1
Female sockets for elevator shaft technology 2
Ferrules 4(91), 1, 2
TOPJOB
S 1
4-conductor chassis-mount terminal strips 1
Field side connection module 3
Field side power supply lter module 3
Fieldbus components 3
Fieldbus connectors 3
Fieldbus controllers 3
Fieldbus couplers 3
Filter modules 3
Fire load
FIT CLAMP
connection
(insulation displacement connection) 1
Fixing ange MCS-MIDI 100% protected against
mismating
- 5 mm 2
- 7.5 mm 2
Fixing ange MCS-MIDI Classic
- 5/5.08 mm 2
- 7.5/7.62 mm 2
Fixing ange MCS-MINI
3.5/3.81 mm 2
Flip-Flop module 4(147)
Function blocks for building automation 3
Function modules 4(112)
Fuse plugs
- for carrier terminal blocks 1
Fuse terminal blocks, f.-e.
- angled type
for mini-automotive blade-style fuses 1
with pivoting fuse holder 1
- horizontal type, TOPJOB
S 1
with pivoting fuse holder 1
Fuse terminal blocks, s.-e. 1
G
Gate modules
- DIN-rail-mountable 4(210-214)
Ground conductor disconnect terminal blocks, f.-e. 1
TOPJOB
S 1
Ground conductor disconnect terminal blocks, s.-e. 1
Ground conductor terminal blocks with insulation
displacement
(FIT CLAMP
) connection 1
Ground conductor terminal blocks, f.-e.
- angled type 1
Supply terminal blocks 1
TOPJOB
(rail-mounted) terminal blocks 1

TOPJOB
S 1
- horizontal type 1
5mm wide; 4mm 1
G
Ground conductor terminal blocks, f.-e.
Triple-deck terminal blocks 1
TOPJOB
S (rail-mounted) terminal blocks 1

TOPJOB
S multilevel terminal blocks 1

TOPJOB
S
Ground conductor terminal blocks, miniature type for
DIN 15 and DIN 35 rails 1
Ground conductor terminal blocks, s.-e. 1
High-current terminal blocks 1
Group marker carriers 4(408), 1, 3
TOPJOB
S 1
GSD les
see Conguration les
H
h-distribution connector
- WINSTA
MINI 5
- WINSTA
MIDI 5
Headers for double-deck assembly MULTI
CONNECTION SYSTEM 2
High-current connectors 1, 2
High-current PCB terminal blocks 2
High-current, rail-mounted terminal blocks with
POWER CAGE CLAMP connection 1
I
I/O enclosures 3
I/O modules
see WAGO-I/O-SYSTEM 3
I/O modules for severe conditions
- WAGO-I/O-SYSTEM 755 3
I/O-SYSTEMS 3
IEC/EN specications 4(428-431), 1, 2, 3
II/O-LIGHTBUS eldbus components 3
Incremental encoder interface 3
see LED gates, LED indicators, LED terminal
blocks
Industrial compact PC 3
Industrial PC 3
Industrial relays 4(92-98)
Industrial switches 3
Input voltage range, extended 4(48, 150)
Insulation displacement (FIT CLAMP
) connection 1
Insulation stop
for matrix patchboards 1
for rail-mounted terminal blocks 1
for MCS 2
Integrated end plate for group formation
Loss of pin spacing 2
INTERBUS
eldbus components 3
Interface modules 4(Section 2)
- for ETHERNET 4(204-206)
- for ERNI mating connector 4(186)
- for Harting mating connector 4(186)
- for Siemens SIMATIC 4(191-194)
- for connectors 4(186-189)
- with header 4(185)
- with D subminiature connector 4(176-183)
Interface software 3
Interference-free in safety functions 3
Intermediate coupler, WINSTA
- MIDI 5
Internal data bus extension modules 3
10
441
10
Catalog
Catalog (Page)
Catalog Catalog
)
Catalog (Page)
I
Intruder detection
see Digital input modules 3
IO-Link Master 3
Item number index 4(446-451), 1, 2, 3, 5
J
Jumpers for rail-mounted terminal blocks
see push-in type wire jumpers, staggered jumpers,
step-down jumpers
JUMPFLEX
Transducers 4(Section 3)
Sockets with solid state relay 4(54-61)
Sockets with miniature switching relay 4(50-52)
Junction and distribution connectors, MICRO for
KNX/EIB applications 2
K
KAMMRELAIS
4(110-111)
KNX IP controller 3
KNX/EIB/TP1 module 3
L
Labeling 1, 2, 3
Lamp demonstration connector
(Service connector) 1
Lamp test circuit gate modules
Latching relays 4(158)
LED and neon indicators, pluggable 1
LED gate modules
- pluggable 4(146)
LED terminal blocks, f.-e. 1
TOPJOB
S 1
LED terminal blocks, f.-e.
double-deck terminal blocks 1
TOPJOB
S 1
LED terminal blocks, f.-e.
triple-deck terminal blocks 1
TOPJOB
S 1
Lighting connectors 1
Lighting control DALI/DSI 3
Lighting protection 4(352-366)
Linect
5
Linux
controller 3
Locking levers
- WINSTA
MINI 5
- WINSTA
MIDI 5
Lockout cap, WINSTA
- MINI 5
- MIDI 5
Lockout caps 2
Longitudinal switching disconnect
terminal blocks 1
LONWORKS
eldbus components 3
Luminaire connectors 1
M
Magnetic antenna 4(374), 3
Male and female connectors
see Connectors, for ex. for racks
Manual control module 4(173)
Manuals for eldbus components 3
Marker branches 1
Marker cards
Miniature WSB Quick marking system
(miniature WSB cards) 4(408), 1, 2, 3
Self-adhesive marker strips, computer-marked 1, 2
WAGO Multi marking system
(WMB cards) 4(408), 1, 2, 3
WAGO WSB Quick marking system
(WSB cards) 4(408), 1
Marker carrier 3
Marker carriers 1
Marker for WAGO group marker carriers 4(408), 1,
3
Marker strips for TOPJOB
S 1
Marker strips, self-adhesive 2, 3
Marker tags 1
Marking 4(408), 1, 2, 3, 5
Material specication for insulation materials,
contact materials, contact surface 1, 2
Measurement and disconnect terminal blocks
see Disconnect terminal blocks for test and
measurement
MICRO PUSH WIRE
connectors for
junction boxes 1
Millivolt transducer 4(248-249)
Miniature ground conductor terminal blocks, f.e.
for DIN 15 and DIN 35 rails 1
Miniature switching relays 4(32-38, 50-52)
Miniature through terminal bolcks, f.-e.
for DIN 15 and DIN 35 rails 1
Miniature WSB Quick marking system
(marker cards) 4(408), 1, 2, 3
MODBUS
eldbus components 3
Modular feedthrough terminal blocks 2
Modular female PCB connectors 2
Modular PCB terminal blocks
fuse terminal blocks, terminal blocks, terminal
blocks for test and measurement 2
f.-e. and s.-e., high-current terminal blocks 2
1-conductor 2
2-conductor 2
Modular terminal blocks and terminal strips
see terminal strips and modular terminal blocks
see PCB terminal blocks
Modular test plug adapters see Test plug adapters
Modular WAGO-I/O-SYSTEM 750 3
Module in DIN-rail mount enclosure
- Manual control module 4(173)
- Radio switching receiver 4(172)
- Switching relay 4(152-159)
- for building custom circuits 4(382)
Modules for self-assembly 4(215)
Mounting adapter
222 Series 1
243 Series 1
273 Series 1
773 Series 1
2273 Series 1
Mounting carrier for MULTI CONNECTION
SYSTEM 2
Mounting carrier
for isolated mounting on carrier rails 1
Mounting carriers and feet for snap-t mounting to
PCBs 4(386-387)
Mounting carriers for DIN-rail mounting PCBs
4(384-385)
M
Mounting plates, for WINSTA
distribution
connectors
- MINI 5
- MIDI 5
- IDC 5
MULTI CONNECTION SYSTEM MICRO 100%
protected against mismating, pin spacing
- 2.5mm 2
- 2.5mm press-in technology 2
- 2.5mm reow soldering 2
MULTI CONNECTION SYSTEM MIDI 100%
protected against mismating, pin spacing
- 5mm 2
- 5mm press-in technology 2
- 7.5mm 2
MULTI CONNECTION SYSTEM MIDI Classic, pin
spacing
- 5mm, 5.08mm 2
- 5mm reow technology 2
- 7.5mm, 7.62mm 2
- 7,5 mm reow technology 2
MULTI CONNECTION SYSTEM MINI 100% protec-
ted against mismating, pin spacing
- 3.5mm 2
- 3.81mm 2
- MINI HD 2
- MINI HD reow soldering 2
MULTI CONNECTION SYSTEM, accessories 2
Multifunction timing relay 4(127)
Multilevel installation terminal blocks
TOPJOB
see ZKGT
TOPJOB
S 1
Multilevel PCB terminal strips, double-deck,
triple-deck, quadruple-deck terminal strips 2
Multilevel terminal blocks
see multilevel installation terminal blocks
Double-deck, triple-deck, quadruple-deck terminal
blocks 1
TOPJOB
S 1
Multi-port device taps for DeviceNet 3
Multirange timing relay, pluggable 4(126)
N
NAMUR switching amplier modules 4(138)
N-conductor disconnect terminal blocks
TOPJOB
1
TOPJOB
S 1
Neon indicator modules, plugable 1
O
OPC server for MODBUS-/TCP 3
Operating lever 2
Operating stickers 1, 2
Operating tool 4(414), 1, 2, 3, 5
TOPJOB
1
TOPJOB
S 1
Optocoupler modules
- Rail-mounted terminal block 4(39-47)
Order form available on request
10
442
P
Parameterization les
see Conguration les 3
Parameterizing software 4(236)
Patching systems
Common potential matrix 1
Terminal blocks for matrix patching (3-conductor
double potential terminal blocks) 1
Terminal blocks for matrix patching and common
potential terminal blocks (4-level terminal blocks,
8-level terminal blocks) 1
Matrix patchboards with CAGE CLAMP

connection 1
PERSPECTO 3
Phase selection
WINSTA
MIDI
WINSTA
MIDI 5
WINSTA
IDC 5
Pin modules for rail-mounted terminal blocks for
Wire-Wrap
and Thermi-Point
1
Plotters and accessories 4(Section 8), 1, 3
Pluggable fuse modules
- for carrier terminal blocks 1
- for double-deck, triple-deck terminal blocks 1
Pluggable wiring 3
Plugs
WINSTA
MINI 5
WINSTA
MIDI 5
WINSTA
MAXI 5
WINSTA
KNX 5
- MULTI CONNECTION SYSTEM 2
X-COM
-SYSTEM 1
Plugs for elevator shaft technology 2
POWER CAGE CLAMP termination 1
TOPJOB
S 1
TOPJOB
1
TOPJOB
S 1
Power supplies
- DIN-rail-mountable 4(Section 4), 3
- Constant voltage sources 4(342-343), 3
- Power supplies, DIN-rail-mountable
4(344-347), 3
- Power supplies, in shielded-metal housing
4(284-321), 3
Power supply connectors 1
Press-in technology
MULTI CONNECTION SYSTEM, 3.5mm, 3.81mm,
5mm
Primary switch mode power supply units
4(Section 4), 3
Printers and accessories 4(400-406), 1, 3
PROFIBUS eldbus components 3
PROFINET eldbus connectors 3
PROFINET I/O eldbus components 3
PROFIsafe, safety modules 3
Programmable eldbus controllers 3
Programming interface, wireless 3
ProServe
, WAGO services 4(Section 8), 1, 3

Pt100 analog input module 3
Pulse width output module 3
PUSH WIRE
connection 1
PUSH WIRE
connectors for junction boxes 1

PUSH WIRE
connectors for junction boxes Ex e II 1

PUSH WIRE
connectors for junction boxes, MICRO

1
Push-in type wire jumpers for
rail-mounted terminal blocks 1
TOPJOB
S 1
Q
Quadruple-deck terminal strips for PCBs 2
Quadruple-deck, rail-mounted terminal blocks for fast
electric motor wiring 1
TOPJOB
S 1
R
Radio adapter 3
Radio receiver in DIN-rail mountable enclosure
4(372), 3
Radio receiver in WINSTA
box 3
Radio receiver module 3
Rail end cap, for DIN 35 rail 4(413), 3
Rail-mounted modules for building custom circuits
4(215)
with CAGE CLAMP
connection 1
with CAGE CLAMP
S connection 1
with FIT CLAMP
(IDC) connection 1
with coupler function 4()
with overvoltage protection 4(Section 5)
for building custom circuits 4(Section 7)
with POWER CAGE CLAMP connection 1
Rail-mounted terminal blocks for fast electric motor
wiring (quadruple-deck) 1
TOPJOB
S 1
Railway applications 4(48, 150)
Reel (THR)
- PCB 2
- MCS 2
Reow soldering: MULTI CONNECTION SYSTEM 2
- 2.5mm 2
- 3.5mm/3.81mm 2
- 5mm 2
- 7,5 mm 2
Reow soldering: PCB terminal blocks 2
Relay modules
- in DIN-rail mount enclosure 4(152-159)
- terminal blocks 4(32-49)
- with miniature relay 4(50-91)
- DIN-rail-mountable 4(Section 1)
Relay output module 3
Relay socket
- DIN-rail-mountable
- with miniature relay
Repeater power supply 3
Repeater power supply, HART 4(230-231)
Resettable fault indication modules
Resistance sensors 3
Resistive temperature device (RTD) input module 3
Resistor bridges (strain gauge) 3
Resistor gate modules
Ribbon cables 5
RJ-45 connection 4(204-205), 3
RJ-45 connectors 3
RJ-45 interface module 4(204-205)
RS-232 serial interface 3
RS-485 serial interface 3
RTC module 3
S
S0 optocoupler modules 4(136)
S0 supply modules 4(137)
S
Safety modules 3
Sales worldwide 1, 2, 3
Same potential terminal blocks and terminal blocks
for matrix patching, 4-level terminal blccks, 8-level
terminal blocks 1
SCHUKO, see WINSTA
MIDI cable assemblies 5

Screwdriver
see Operating tool
Screw-type anges
MCS - MINI 2
MCS - MIDI 2
MCS - MINI HD 2
Seminars 4(436-437), 1, 2, 3
Sensor cable 3
Sensor terminal blocks and sensor LED terminal
blocks 1
Sensor/Actuator boxes 3
Separation module 3
SERCOS-III eldbus coupler 3
Serial interface 3
Service and programming software WAGO-I/O-
SYSTEM 759 3
Service connectors 1
Services ProServe 4(394-406), 1, 3
Servo stepper controller 3
Shield clamps 1
Shield connecting plate
- WINSTA
MINI 5
- WINSTA
MIDI 5
Shield connecting system,
shield clamping saddle 4(390-393), 1, 3
Shield terminal blocks
- angled type 1
TOPJOB

- horizontal type 1
TOPJOB

TOPJOB
S (double-deck) terminal blocks 1

Shorting plugs, WINSTA
5
Siemens-SIMATIC 4(232-233)
Signal splitter 4(232-233)
Snap-in connectors, WINSTA
- MINI 5
- MIDI 5
Snap-in mounting feet, MCS-MIDI Classic
- 5/5.08mm 2
- 7.5/7.62mm 2
Snap-in mounting feet, MCS-MIDI, 100% protected
against mismating
- 5mm 2
- 7.5mm 2
Socket 4(Section 1)
Sockets
WINSTA
MINI 5
WINSTA
MIDI 5
WINSTA
MAXI 5
WINSTA
KNX 5
Software 1, 2, 3
WAGO SCRIPT 2
WAGOframe 4(268), 2, 3
Software tool 3
Solder pin strips 2
Solid state relays 4(Section 1, )
Spacer of same shape 1, 2
Spacers 2
Spacers for sensor and actuator
terminal blocks 1
Specialty I/O modules 3
Specications IEC/EN 4(428-431), 1, 2, 3
Specications UL - Underwriters Laboratories USA
- Tests and test procedures per UL standards 1, 2
10
443
10
Catalog
Catalog (Page)
Catalog Catalog
)
Catalog (Page)
S
SPEEDWAY 3
SSI transmitter interface 3
Staggered jumpers for rail-mounted terminal blocks 1
TOPJOB
S 1
Star point jumpers 1
Step-down jumpers for through terminal blocks
- f.-e. 1
- s.-e. 1
TOPJOB
S 1
Stepper controller 3
Stepper module 3
Strain relief housings
for MCS-MINI 2
for MCS-MIDI 2
for WINSTA

- MINI 4(), 5
- MIDI 5
Strain relief plates
for MCS-MICRO 2
for MCS-MINI / MINI HD 2
for MCS-MIDI 2
for MULTI CONNECTION SYSTEM MICRO, MIDI,
MINI
for 294 Series 1
Stripping knife for at cables 5
Stripping tools 4(416), 1, 2, 3, 5
Subsidiaries and representatives,
WAGO worldwide 4(452-453), 1, 2, 3, 5
Supply module 3
Supply module, WINSTA
IDC 5
Supply modules
see power supply modules
Supply terminal blocks,
ground terminal block
TOPJOB
1
TOPJOB
S 1
N-conductor disconnect terminal blocks
TOPJOB
1
TOPJOB
S 1
Surge suppression devices
- Rail-mounted terminal blocks 4(362-367)
Switchgear cabinet drawer 1
Switchgear cabinet socket 1
Switching modules 4(159)
- pluggable 4(139)
Switching modules, changeovers, pluggable 4(139)
Switching relay modules
- in rail-mounted terminal blocks
- in DIN-rail-mount enclosure
- DIN-rail-mountable
- pluggable
System I/O modules 3
System wiring 4(191-202), 3
T
T marker tag 1
Tape (THR)
- PCB 2
- MCS 2
Tap-o modules
WINSTA
IDC 5
T-distribution connector
- WINSTA
MINI 5
- WINSTA
MIDI 5
- WINSTA
KNX 5
Technical information
general 1, 2, 3, 5
T
Technical information
hazardous areas 1, 3
for use with miniature metric fuses 1
Technical support 3
Telecontrol technology 3
Telecontroller 3
Temperature range, extented 4(48, 150), 3
Temperature transducer modules 4(272-276)
Temperature transducers 4(238-251)
Terminal block marking 1, 2
Terminal blocks and terminal strips with xing anges
or snap-in mounting feet 1
- f.-e. 1
- s.-e. 1
Terminal blocks for PCBs 2
Terminal blocks for pluggable modules, f.-e.
4(, , , 378-379)
- f.-e. 1
- s.-e. 1
Terminal strips for electrical devices 1
Terminal strips for PCBs
with locking slide, 2
Double-deck terminal strips, 2
Triple-deck terminal strips, 2
Quadruple-deck terminal strips, 2
f.-e. and s.-e., 2
for press-in technology, 2
for reow soldering, 2
High-current terminal strips, 2
with nger operated levers, 2
2-conductor 2
Test pin 2
Test plug adapters for
255, 256, 257 Series PCB terminal blocks 2
Test plug modules for 2
translate 2
Testboy 4(), 1, 2, 3
Tests and testing procedures 1, 2
Electrical tests, environmental tests, mechanical
tests, material tests 2
Thermal transfer printers 4(401), 1, 3
Thermocouple 3
Threaded anges
- MINI 2
- MIDI 2
- MINI HD 2
Threshold value switch 4(260-261)
Through terminal blocks with insulation displacement
connection (FIT CLAMP
) 1
Through terminal blocks, f.-e.
- angled type 1
for transformer circuits 1
suitable for fuse terminal blocks for automotive
blade-style fuses 1
TOPJOB

TOPJOB

- horizontal type 1
5 mm wide; 4 mm 1
double- deck, triple-deck, quadruple-deck terminal
blocks 1
TOPJOB
S 1
TOPJOB

Distribution terminal blocks 1
TOPJOB
S 1
Through terminal blocks, miniature for DIN 15 rail
and DIN 35 rail 1
Through terminal blocks, s.-e. 1
High-current through terminal blocks 1
Time delay relay modules
Tools 4(414-417), 1, 2, 3, 5
T
TO-PASS
3
TOPJOB
terminal blocks with

CAGE CLAMP
connection
Through terminal blocks 1
N-conductor disconnect terminal blocks 1
Power distribution disconnect terminal blocks 1
Shield (screen) terminal blocks 1
Ground conductor terminal blocks 1
Tools 1
TOPJOB
S terminal blocks with

CAGE CLAMP
S connection
Diode and LED terminal blocks 1
Double-potential terminal blocks 1
Through terminal blocks 1
Multilevel installation terminal blocks 1
N-conductor disconnect terminal blocks 1
Power distribution disconnect terminal blocks 1
Test plug adapter 1
Ground conductor terminal blocks 1
Disconnect terminal blocks for test and measure-
ment 1
Fuse terminal blocks 1
Fuse plugs 1
Fuse disconnect terminal blocks with
pivoting fuse holder 1
Connectors 1
Supply terminal blocks for distribution boxes 1
Touch monitor 3
Training 4(436-437), 3
Transducers 4(Section 3)
Transverse switching terminal blocks 1
Triple-deck installation terminal blocks
see TOPJOB

Triple-deck terminal blocks, f.-e. 1
TOPJOB
S 1
diode terminal blocks, LED terminal blocks
TOPJOB
S 1
Triple-deck terminal strips for PCBs 2
TTY interface 3
U
UL specications - Underwriters Laboratories USA
1, 2
Up/down counters 3
User manual on eldbus components 3
V
Variable resistor terminal blocks, f.-e. 1
Vertically movable marking system 1
Vibration velocity/bearing condition monitoring 3
Visu Panel 3
Voltage sources, constant 4(342-343), 3
Voltage tester 4(418-419), 2, 3
W
WAGO
- worldwide 4(452-453), 1, 2, 3, 5
WAGO ProServe 4(Section 8), 1, 3
WAGO CAGE CLAMP
connection 1, 2, 3
WAGO CAGE CLAMP
S connection 1, 2, 3
10
444
W
WAGO online 3
WAGO OPC 3
WAGO ribbon cables 4(Section 1), 3
WAGO services 1, 3
WAGO SPEEDWAY 3
WAGOframe 4(268), 3
WAGO-I/O-CHECK 3
WAGO-I/O-IPC 3
WAGO-I/O-PRO 3
WAGO-USB-Service-Cable 4(269), 3
WCB Combi marking system 1
Web Panel 3
WFB Continuous marking strips 1
WINSTA
5
WINSTA
radio switching receiver 4(373), 3

Wire cutter 4(417), 1, 2, 3, 5
Wire harness support 1
Wire jumpers for rail-mounted terminal blocks
- pluggable 1
TOPJOB
S 1
Wire marking 4(410-411), 1, 3
Wireless technology 3
Wire-tap branch connectors
for ex. in elevator shaft technology 2
Wiring aid, WINSTA
5
Wiring, pluggable 3
WMB Inline 4(408), 1, 3
WMB Multi marking system 4(408), 1, 2, 3
WSB Quick marking system 4(408), 1, 2
X
X-COM
S-SYSTEM
Carrier terminal blocks 1
Female plugs with
CAGE CLAMP
S connection 1
X-COM
-SYSTEM
- Carrier terminal blocks 1
- Female plugs with
CAGE CLAMP
connection 1
- Male connectors with
CAGE CLAMP
connection 1
- Headers with solder pins 1
10
445
10
Item no. Page Item no. Page Item no. Page Item no. Page
206 Series
206-118 417
206-124 416
206-125 416
206-126 416
206-127 416
206-128 416
206-170 415
206-171 415
206-173 415
206-174 415
206-204 417
206-216 417
206-501 416
206-502 416
206-503 416
206-804 419
206-806 418
206-807 418
206-808 418
206-810 419
206-811 419
206-815 419
209 Series
209-109 413
209-112 90
209-119 386
209-120 386
209-188 386
209-501 379
209-501/000-002 408
209-501/000-005 408
209-501/000-006 408
209-501/000-007 408
209-501/000-012 408
209-501/000-017 408
209-501/000-023 408
209-501/000-024 408
209-552 137
209-601 151
209-682 151
209-685 151
209-686 151
209-690 151
209-691 151
209-692 151
209-693 151
209-701 151
209-701/000-002 151
209-701/000-005 151
209-701/000-006 151
209-701/000-007 151
209-701/000-012 151
209-701/000-017 151
209-701/000-023 151
209-701/000-024 151
209-702 151
209-782 151
209-783 151
209-784 151
209-787 151
209-789 151
209-951 151
209-952 151
209-953 151
209-954 151
209-955 151
209-957 151
209-994 151
209-995 151
209-996 151
209-997 151
210 Series
210-110 49
210-112 412
210-113 412
210-114 412
210-115 412
210-118 412
210-133 393
210-148 412
210-149 412
210-196 412
210-197 412
210-492 379
210-504 412
210-505 412
210-506 412
210-508 412
210-533 384
210-620 383
210-647 414
210-648 414
210-657 414
210-658 414
210-701 403
210-703 403
210-704 403
210-705 403
210-705/000-002 403
210-706 403
210-706/000-002 403
210-707 403
210-707/000-002 403
210-708 403
210-710 403
210-719 414
210-720 49
210-721 414
210-722 414
210-732 403
211 Series
211-110 403
211-111 403
211-112 403
211-113 403
211-114 403
211-115 403
211-120 403
211-121 403
211-122 403
211-123 403
211-124 403
211-125 403
211-129 403
211-135 403
211-150 403
211-151 403
211-155 403
211-156 403
211-161 403
211-162 403
211-211 403
211-611 402
211-612 402
211-613 402
211-614 402
211-615 402
216 Series
216-542 91
248 Series
248-450 49
248-451 49
248-452 49
248-453 49
248-454 49
248-455 49
248-501 49
248-502 49
248-503 49
248-504 49
248-505 49
248-506 49
248-566 49
249 Series
249-116 413
249-117 413
249-606 151
249-607 151
249-608 151
249-622 151
249-623 151
249-651 151
249-653 151
249-654 151
249-656 151
258 Series
258-139 406
258-140 406
258-141 406
258-143 402
258-144 402
258-145 402
258-146 406
258-147 406
258-149 402
258-150 402
258-157 402
258-161 402
258-162 402
258-166 402
258-169 402
258-171 402
258-173 402
258-177 402
258-178 402
258-200 405
258-226 406
258-227 406
258-228 406
258-229 406
258-298 401
258-326 406
258-327 406
258-328 406
258-329 406
258-342 402
258-343 401
258-350 404
258-361 407
258-362 407
258-363 407
258-364 407
258-365 407
258-366 407
258-367 407
258-368 407
258-369 407
258-370 407
258-371 407
258-372 407
258-373 407
258-374 407
258-375 407
258-377 407
258-378 407
258-379 407
258-380 407
258-381 407
258-382 407
258-383 407
258-387 407
258-388 407
258-389 407
258-390 407
258-391 407
258-392 407
258-393 407
258-394 407
258-396 407
258-397 407
258-398 407
258-399 407
258-410 407
258-426 406
258-426/000-005 406
258-427 406
258-427/000-005 406
258-428 406
258-428/000-005 406
258-429 406
258-429/000-005 406
258-450 404
258-451 404
258-452 406
258-452/000-002 406
258-452/000-003 406
258-452/000-004 406
258-452/000-005 406
258-452/000-007 406
258-452/000-010 406
258-453 406
258-454 407
258-455 407
258-456 407
258-457 406
258-458/000-002 406
258-458/000-004 406
258-470 407
258-471 407
258-472 407
258-473 407
258-6000 400
258-6100 400
Item Number Index)
446
10
280 Series
280-101 380
280-340 358
280-341 358
280-502/281-582 359
280-502/281-583 359
280-502/281-584 359
280-502/281-585 359
280-502/281-586 359
280-502/281-587 359
280-502/281-588 359
280-502/281-589 359
280-502/281-590 359
280-502/281-591 359
280-502/281-592 359
280-502/281-593 359
280-502/281-594 359
280-502/281-595 359
280-502/281-602 358
280-502/281-603 358
280-502/281-604 358
280-502/281-605 358
280-502/281-606 358
280-502/281-607 358
280-502/281-608 358
280-502/281-609 358
280-502/281-610 358
280-502/281-611 358
280-502/281-612 358
280-502/281-613 358
280-502/281-614 358
280-503/281-579 360
280-503/281-580 360
280-503/281-581 360
280-601 380
280-606 380
280-608 112
280-609 113
280-610 380
280-616 380
280-618 112
280-619 113
280-621 380
280-628 115
280-629 117
280-636 118
280-638 115
280-639 117
280-681 380
280-686 380
280-762 112
280-763 113
280-764 115
280-765 117
280-801 380
280-802 380
280-803 380
280-804 380
280-804/281-419 143
280-833 380
280-901 380
280-916 380
286 Series
286-110 378
286-111 378
286-112 378
286-113 378
286-302 113
286-303 113
286-304 113
286-304/004-000 150
286-305 113
286-306 113
286-307 113
286-307/004-000 150
286-308 113
286-310 115
286-311 115
286-312 115
286-312/004-000 150
286-313 115
286-314 115
286-315 115
286-316 115
286-318 116
286-319 116
286-320 116
286-320/004-000 150
286-321 116
286-322 116
286-324 116
286-326 116
286-327 116
286-328 116
286-328/004-000 150
286-329 116
286-330 116
286-332 116
286-334 117
286-335 117
286-336 117
286-336/001-000 150
286-337 117
286-338 117
286-339 117
286-342 117
286-343 117
286-344 117
286-344/004-000 150
286-345 117
286-346 117
286-347 117
286-350 118
286-351 118
286-352 118
286-352/004-000 150
286-353 118
286-354 118
286-355 118
286-364 112
286-364/004-000 150
286-365 112
286-366 112
286-368 112
286-369 112
286-370 112
286-375 118
286-376 119
286-380 121
286-381 121
286-384 119
286-394 114
286-394/004-000 150
286-395 114
286-426 123
286-427 123
286-428 123
286-440 124
286-442 124
286-444 124
286-446 124
286-448 124
286-450 124
286-460 125
286-462 125
286-464 125
286-470 125
286-472 125
286-474 125
286-502 113
286-503 113
286-504 113
286-505 113
286-506 113
286-507 113
286-508 113
286-510 115
286-511 115
286-512 115
286-513 115
286-514 115
286-515 115
286-516 115
286-520 116
286-536 117
286-540 117
286-544 117
286-547 117
286-548 117
286-552 118
286-555 118
286-556 118
286-564 112
286-566 112
286-567 112
286-568 112
286-570 121
286-571 121
286-578 118
286-579 118
286-594 114
286-600 122
286-602 122
286-604 122
286-604/004-000 150
286-610 122
286-612 122
286-614 122
286-616 126
286-640 127
286-640/004-000 150
286-659 140
286-661 140
286-662 141
286-664 141
286-665 141
286-681 148
286-683 149
286-684 148
286-700 128
286-701 128
286-702 128
286-704 129
286-706 129
286-708 129
286-720 130
286-721 130
286-723 131
286-725 133
286-726 132
286-728 132
286-730 132
286-732 132
286-733 132
286-734 132
286-740 136
286-740/001-000 136
286-741 136
286-742 137
286-750 128
286-751 128
286-752 128
286-752/002-000 131
286-754 129
286-756 129
286-758 129
286-790 135
286-791 133
286-792 134
286-794 134
286-803 145
286-805 145
286-807 145
286-809 145
286-813 145
286-815 145
286-817 145
286-819 145
286-822 146
286-825 147
286-826 146
286-830 142
286-831 365
286-832 366
286-833 364
286-834 364
286-834/024-000 365
286-835 362
286-835/115-000 362
286-836 362
286-838 363
286-838/115-000 363
286-840 142
286-841 366
286-842 366
286-843 366
286-844 366
286-860 272
286-860/000-300 275
286-860/150-030 274
286-861 272
286-861/000-300 275
286-861/150-030 274
286-862 272
286-862/000-300 275
286-862/150-030 274
286-863 273
286-864 273
286-865 273
286-866 273
286-867 273
286-868 273
286-870 272
286-870/000-300 275
286-870/150-030 274
286-871 272
286-871/000-300 275
286-871/150-030 274
286-872 272
286-872/000-300 275
286-872/150-030 274
286-873 276
286-874 276
286-875 276
286-880 138
286-881 138
286-890 144
286-891 144
286-895 139
286-896 139
286-904 120
286-906 120
286-906/004-000 150
286-938 135
447
10
10
287 Series
287-474 107
287-475 106
287-774 103
287-804 104
287-814 104
287-824 104
287-834 104
287-853 105
287-854 105
288 Series
288-001 110
288-002 110
288-003 386
288-111 110
288-112 110
288-113 110
288-131 110
288-132 110
288-133 110
288-151 111
288-152 111
288-153 111
288-304 101
288-312 102
288-320 106
288-364 100
288-368 100
288-380 107
288-412 109
288-413 109
288-414 109
288-415 109
288-416 109
288-418 109
288-422 109
288-423 109
288-424 109
288-425 109
288-426 109
288-428 109
288-435 108
288-437 108
288-504 101
288-508 101
288-512 102
288-554 101
288-564 100
288-565 100
288-567 100
288-568 100
288-600 384
288-601 384
288-602 384
288-620 385
288-621 385
288-622 385
288-626 385
288-627 385
288-758 102
288-761 102
288-762 102
288-800 342
288-801 343
288-808 345
288-809 344
288-810 344
288-812 346
288-813 345
288-814 346
288-815 346
288-816 347
288-824 351
288-895 350
289 Series
289-101 210
289-102 215
289-103 210
289-105 211
289-111 212
289-113 214
289-114 214
289-121 212
289-131 215
289-151 213
289-172 205
289-174 206
289-175 206
289-176 205
289-177 204
289-178 204
289-201 213
289-202 213
289-401 185
289-402 185
289-403 185
289-404 185
289-405 185
289-406 185
289-407 185
289-408 185
289-409 185
289-422 187
289-423 187
289-424 187
289-425 187
289-426 187
289-427 187
289-430 188
289-431 188
289-434 186
289-436 186
289-440 176
289-441 176
289-442 176
289-443 176
289-444 176
289-445 176
289-446 176
289-447 176
289-448 176
289-449 176
289-450 178
289-451 178
289-452 178
289-453 178
289-454 178
289-455 178
289-456 178
289-457 178
289-458 178
289-459 178
289-501 185
289-502 185
289-503 185
289-504 185
289-505 185
289-506 185
289-507 185
289-508 185
289-509 185
289-510 185
289-522 188
289-523 189
289-526 188
289-527 189
289-531 189
289-540 177
289-541 177
289-542 177
289-543 177
289-544 177
289-545 177
289-546 177
289-547 177
289-548 177
289-549 177
289-550 179
289-551 179
289-552 179
289-553 179
289-554 179
289-555 179
289-556 179
289-557 179
289-558 179
289-559 179
289-575 180
289-576 180
289-577 180
289-578 180
289-585 180
289-586 180
289-587 180
289-588 180
289-611 184
289-612 184
289-613 184
289-614 184
289-615 184
289-616 184
289-617 184
289-618 184
289-619 184
289-620 181
289-621 181
289-623 181
289-624 181
289-650 182
289-652 182
289-664 208
289-665 208
289-666 208
289-667 209
289-671 209
289-680 192
289-681 192
289-682 193
289-683 193
289-684 194
289-685 194
289-686 195
289-687 195
289-720 183
289-721 183
289-722 183
289-723 183
289-725 183
289-726 183
289-727 183
289-728 183
289-822 190
289-907 342
289-913 350
289-965 164
289-966 164
704 Series
704-5003 202
704-5004 199
704-5013 202
704-5014 199
704-5024 198
704-5034 199
704-5044 198
704-5054 200
704-5064 201
704-5074 200
706 Series
706-100/1300-200 66
706-100/1301-200 67
706-100/1303-200 67
706-100/1602-200 66
706-3057/300-100 203
706-3057/300-200 203
706-3057/300-300 203
706-753/300-100 64
706-753/300-200 64
706-753/300-300 64
706-753/301-100 64
706-753/301-200 64
706-753/301-300 64
706-7753/302-100 203
706-7753/302-200 203
706-7753/304-100 65
706-7753/304-200 65
706-7753/304-300 65
706-7753/306-100 65
706-7753/306-200 65
706-7753/306-300 65
709 Series
709-118 403
709-119 403
709-120 403
709-177 402
709-178 402
709-196 384
709-198 384
709-350 393
709-352 393
750 Series
750-923 268
758 Series
758-910 374
758-912 374
758-940/001-000 374
758-940/002-000 374
758-940/003-000 374
758-940/004-000 374
759 Series
759-370 268
770 Series
770-103 373
770-113 373
770-114 373
770-629/101-000 373
770-629/102-000 373
Item Number Index
16 Bit)
448
10
786 Series
786-101 378
786-102 378
786-103 378
786-301 278
786-302 278
786-303 278
786-304 279
786-305 279
786-306 279
786-307 279
786-308 279
786-309 279
786-321 278
786-322 278
786-323 278
786-324 280
786-325 280
786-326 280
786-337 280
786-338 280
786-339 280
787 Series
787-1001 284
787-1002 287
787-1011 285
787-1012 288
787-1021 286
787-1022 289
787-1664 331
787-1668 332
787-1675 321
787-601 310
787-602 313
787-611 311
787-612 314
787-613 317
787-621 312
787-622 315
787-623 318
787-632 316
787-633 319
787-692 320
787-712 290
787-722 291
787-732 292
787-818 296
787-819 293
787-821 294
787-822 297
787-831 295
787-832 298
787-833 300
787-834 299
787-835 301
787-840 302
787-842 303
787-844 304
787-845 305
787-847 306
787-850 307
787-852 308
787-854 309
787-860 328
787-861 330
787-862 329
787-870 322
787-871 325
787-872 326
787-873 327
787-875 323
787-876 324
787-880 334
787-881 335
787-885 336
787-886 337
787-890 338
787-895 339
787-896 340
787-897 341
788 Series
788-100 89
788-101 89
788-102 89
788-103 89
788-113 90
788-114 90
788-115 90
788-116 90
788-117 90
788-120 90
788-121 90
788-122 90
788-123 90
788-124 90
788-125 90
788-150 86
788-152 86
788-154 86
788-155 87
788-156 86
788-157 87
788-158 86
788-160 86
788-162 86
788-164 86
788-166 86
788-168 86
788-170 86
788-172 86
788-174 86
788-175 87
788-176 86
788-177 87
788-178 86
788-179 87
788-180 86
788-181 87
788-182 88
788-183 88
788-184 88
788-185 88
788-186 88
788-187 88
788-188 88
788-189 88
788-190 88
788-191 88
788-192 88
788-193 88
788-303 72
788-304 72
788-305 72
788-306 72
788-307 72
788-311 72
788-312 72
788-313 72
788-314 72
788-315 72
788-324 76
788-334 76
788-341 82
788-342 82
788-344 82
788-346 82
788-347 82
788-349 82
788-354 78
788-355 79
788-384 80
788-404 74
788-412 74
788-506 73
788-507 73
788-508 73
788-512 73
788-515 73
788-516 73
788-528 77
788-538 77
788-541 83
788-543 83
788-544 83
788-546 83
788-548 83
788-549 83
788-607 75
788-608 75
788-615 75
788-616 75
788-700 84
788-701 84
788-720 85
788-721 85
789 Series
789-112 162
789-120 382
789-122 382
789-124 382
789-126 382
789-127 382
789-128 382
789-129 382
789-130 382
789-131 382
789-132 382
789-133 382
789-134 382
789-1341 156
789-1346 156
789-1544 157
789-1549 157
789-304 152
789-312 153
789-313 153
789-315 153
789-323 159
789-325 160
789-329 161
789-336 155
789-352 154
789-504 152
789-508 152
789-512 153
789-515 153
789-516 153
789-535 155
789-536 155
789-551 154
789-552 154
789-570 158
789-571 158
789-601 172
789-602 172
789-620 164
789-621 166
789-622 168
789-652 170
789-810 173
789-811 173
790 Series
790-100 393
790-101 393
790-108 392
790-110 393
790-112 393
790-113 393
790-114 393
790-115 393
790-116 392
790-124 392
790-133 393
790-134 393
790-140 392
790-144 393
790-145 393
790-190 393
790-191 393
790-192 393
790-193 393
790-300 393
790-301 393
791 Series
791-107 392
791-111 392
791-117 392
791-124 392
792 Series
792-800 354
792-801 354
792-802 355
792-803 355
792-804 356
792-805 356
793 Series
793-3501 408
793-4501 408
793-501 71
793-502 71
793-503 71
793-504 71
793-505 71
793-506 71
793-5501 408
793-566 71
807 Series
807-090/101-100 403
449
10
10
857 Series
857-104 70
857-107 70
857-108 70
857-1330 52
857-1430 60
857-1432 61
857-1494 60
857-150 68
857-152 68
857-153 68
857-155 68
857-157 68
857-161 69
857-162 69
857-164 69
857-165 69
857-167 69
857-168 69
857-303 50
857-304 50
857-305 50
857-306 50
857-307 50
857-308 50
857-314 51
857-317 51
857-318 51
857-354 50
857-357 50
857-358 50
857-364 51
857-367 51
857-368 51
857-400 218
857-401 220
857-402 222
857-409 224
857-411 226
857-412 226
857-413 226
857-414 226
857-415 226
857-416 226
857-420 228
857-421 230
857-423 232
857-450 234
857-451 236
857-452 237
857-500 256
857-531 260
857-550 262
857-552 264
857-704 54
857-707 54
857-708 55
857-714 56
857-717 56
857-718 57
857-724 58
857-727 58
857-728 59
857-800 238
857-801 240
857-809 252
857-810 242
857-811 244
857-818 246
857-819 248
857-820 250
857-979 266
857-980 270
857-981 62
857-982 62
857-986 63
858 Series
858-100 97
858-110 98
858-150 96
858-151 96
858-152 96
858-153 96
858-304 92
858-314 92
858-324 95
858-325 95
858-327 95
858-328 95
858-390 94
858-391 94
858-392 94
858-402 98
858-508 93
858-518 93
858-528 95
859 Series
859-110 381
859-302 32
859-303 32
859-304 32
859-305 32
859-306 32
859-307 32
859-308 32
859-314 33
859-317 33
859-318 35
859-353 32
859-354 32
859-355 32
859-357 32
859-358 32
859-359 34
859-360 34
859-367 35
859-368 36
859-384 48
859-386 48
859-390 36
859-391 37
859-392 38
859-393 48
859-394 48
859-397 48
859-398 37
859-399 48
859-402 49
859-403 49
859-404 49
859-405 49
859-406 49
859-407 49
859-408 49
859-409 49
859-410 49
859-500 49
859-501 381
859-525 49
859-702 44
859-706 45
859-708 44
859-712 43
859-720 41
859-730 42
859-740 42
859-752 45
859-756 46
859-758 46
859-772 43
859-791 39
859-793 39
859-794 41
859-795 40
859-796 40
859-801 348
859-802 348
859-804 349
859-805 349
859-902 47
870 Series
870-518 360
870-519 360
870-523/281-579 360
870-523/281-580 360
870-523/281-581 360
870-523/281-582 361
870-523/281-583 361
870-523/281-584 361
870-523/281-585 361
870-523/281-586 361
870-523/281-587 361
870-523/281-588 361
870-523/281-589 361
870-523/281-590 361
870-523/281-591 361
870-523/281-592 361
870-523/281-593 361
870-523/281-594 361
870-523/281-595 361
2009 Series
2009-110 402
2009-114 402
2009-115 402
2009-135 402
Item Number Index
16 Bit)
10
450
10
451
10
Argentina
Bruno Schillig S.A.
Arenales 4030, B1604CFD
Florida, PBA
Phone +54 11 4730 1100
Fax +54 11 4761 7244
wago@schillig.com.ar
Australia
Kontact Group
Building Automation & WINSTA Systems
Oce: 730 Springvale Rd
Mulgrave Victoria 3170
P.O. Box 3003, Wheelers Hill VIC 3150
Tel. +61 03 95602757
Fax +61 03 95601727
sales@kontactgroup.com.au
NHP ELECTRICAL ENGINEERING
PRODUCTS PTY LTD
43-67 River Street
Richmond, Victoria, 3121, P.O. Box 199
Phone +61 3 9429 2999
Fax +61 3 9429 1075
export@wago.com
Austria
WAGO Kontakttechnik Ges.m.b.H.
Laxenburger Strae 244
1230 Wien
Phone +43 1 6150780
Fax +43 1 6150775
info.at@wago.com
Azerbaijan
AZ Technics LTD
Zul V. Alizade
Y.Safarov str.33 , AZ1025,
Baku
Republic of Azerbaijan
Tel. +994 12 4968335
Fax +994 12 4968334
info@AZtechnics.az
Belarus
UP FEK
pr-t Pushkina 29-B
220015 Minsk
Phone +375 17 2102189
Fax +375 17 2102189
wago@fek.by
Belgium
WAGO Kontakttechnik
Excelsiorlaan 11
1930 Zaventem
Phone +32 2 7179090
Fax +32 2 7179099
info-be@wago.com
Bosnia and Herzegovina
please contact WAGO Bulgaria
Brazil
WAGO Eletroeletrnicos Ltda
Rua Amrico Simes 1470
So Roque da Chave
Itupeva SP Brasil 13295-000
Phone +55 11 4591 0199
Fax +55 11 4591 0190
info.br@wago.com
Bulgaria
WAGO Kontakttechnik GmbH & Co. KG
Business Center Serdika
2E Akad. Ivan Geshov Blvd.
Building 1, Floor 4, Oce 417
1330 Soa
Phone +359 2 489 46 09
Fax +359 2 928 28 50
info-BG@wago.com
Canada
please contact WAGO USA
Chile
Desimat Chile
Av Puerto Vespucio 9670
Pudahuel Santiago
Phone +56 2 7470152
Fax +56 2 7470153
ventaschile@desimat.cl
China
WAGO ELECTRONIC (TIANJIN) Co. LTD
No.5, Quan Hui Road, Wuqing Development Area
Tianjin 301700
Phone +86 22 59617688
Fax +86 22 59617668
info-cn@wago.com
Columbia
T.H.L. Ltda.
Cra. 49 B # 91-33
Bogot
Phone +57 1 621 85 50
Fax +57 1 621 60 28
ventas-thl@thl-ltda.com
Croatia
M.B.A. d.o.o. za trgovinu i zastupanje
Frana Supila 5
51211 Matulji HR
Phone +385 51 275-736
Fax +385 51 275-066
mba@ri.htnet.hr
Croatia
GENERA CTR d.o.o.
- just for automation technology -
Siget 18 b
10020 Zagreb
Phone +385 13647849
Fax +385 13636662
wago@geneza.hr
Czech Republic
WAGO Elektro spol. sr. o.
Rozvodova 1116/36
143 00 Praha 4 - Modany
Phone +420 261 090 143
Fax +420 261 090 144
info.cz@wago.com
Denmark
WAGO Danmark
Filial of WAGO Kontakttechnik GmbH & Co. KG
Lejrvej 17
3500 Vrlse
Phone +45 44 357777
Fax +45 44 357787
salg.dk@wago.com
Ecuador
ECUAINSETEC CIA LTDA
El Zurriago 177 y El Vengador
P.O. Box 17-16-016
Quito
Phone +593 2 2 26 91 48
Fax +593 2 2 46 18 33
g.castro@ecuainsetec.com.ec
Egypt
IBN Engineering Instrumentation & Control
71 a El Shaheed Ahmed Hamdi St.
King Faisal, Giza
Phone +20 2 7214350
Fax +20 2 7221709
sales@ibnengineering.com
Estonia
Eltarko O
Laki 14 - 502
10621 Tallinn
Phone +372 651 7731
Fax +372 651 7786
andres@eltarko.ee
Finland
Filial i Finland
Vellamonkatu 30 B
00550 Helsinki
Phone +358 9 7744 060
Fax +358 9 7744 0660
tilaus@wago.
France
WAGO CONTACT SAS
Paris Nord 2
83 Rue des Chardonnerets
B.P. 55065 - Tremblay en France
95947 - ROISSY CDG CEDEX
Phone +33 1 48172590
Fax +33 1 48632520
info-fr@wago.com
Germany
Postfach 28 80, 32385 Minden
Hansastrae 27
32423 Minden
Phone +49 571 887-0
Fax +49 571 887-169
info@wago.com
Waldstrae 1
99706 Sondershausen
Phone +49 3632 659-0
Fax +49 3632 659-100
info@wago.com
Great Britian
WAGO Limited
Triton Park, Swift Valley Industrial Estate
RUGBY
Warwickshire, CV21 1SG
Phone +44 1788 568008
Fax +44 1788 568050
uksales@wago.com
Greece
PANAGIOTIS SP. DIMOULAS - BIOMAT
DIMOULAS AUTOMATIONS
Kritis Str. 26
10439 Athen
Tel. +30 210 883 3337
Fax +30 210 883 4436
wago.info@dimoulas.com.gr
Hong Kong
National Concord Eng., Ltd.
Unit A-B, 5/F.
Southeast Industrial Building
611-619 Castle Peak Road
Tsuen Wan, N.T.
Phone +852 24292611
Fax +852 24292164
sales@nce.com.hk
Hungary
WAGO Hungria KFT
Ipari Park, Gyr u. 2
2040 Budapest
Phone +36 23 502-170
Fax +36 23 502-166
info.hu@wago.com
Iceland
S. Gudjonsson ehf.
Audbrekku 9-11
202 Kopavogur
Phone +354 520-4500
Fax +354 520-4501
export@wago.com
India
WAGO & CONTROLS (INDIA) LTD.
C-27, Sector-58, Phase-III
Noida-201 301
Gautam Budh Nagar (U.P)
Phone +91 120 2 580409 10
Fax +91 120 2 580081
info@wagoindia.com
Indonesia
please contact WAGO Singapore
Iraq
please contact WAGO Middle East
Iran
Patsa Industry
No. 2 Bahar St.
South Shiraz Ave
P.O. Box.: 15875-1698
14369 Tehran
Phone +98 21 88047626
Fax +98 21 88040886
info.uae@wago.com
Ireland
Drives & Controls
Unit F4, Riverview Business Park
Nangor Road
Dublin 12
Phone +353 1 4604474
Fax +353 1 4604507
wago@drivesandcontrols.ie
Israel
Comtel Israel Electronic Solutions Ltd.
Bet Hapaamon
20 Hataas Street
P.O. Box 66
44425 Kefar-Saba
Phone +972 9 76 77 240
Fax +972 9 76 77 243
sales@comtel.co.il
Italy
WAGO ELETTRONICA SRL
Via Parini 1
40033 Casalecchio di Reno (BO)
Phone +39 051 6132112
Fax +39 051 6272174
info-ita@wago.com
Japan
WAGO Co. of JAPAN Ltd.
Nittetsu ND-Tower Building 4F
Kameido 1-5-7
Koto-Ku
Tokyo 136-0071
Phone +81 3 5627 2050
Fax +81 3 5627 2055
info-jp@wago.com
Kazakhsta
TOO INTANT
ul. Muratbaeva, d. 61
050026 Almaty
Phone +7 727 2371492
Fax +7 727 2980151
info@intant.kz
TOO Technik-Trade
ul. i. A. Protosanova, 81
070004 Ust-Kamenogorsk
Phone +7 7232 254064
Fax +7 7232 253251
info@technik.kz
Korea
Mahani Electric Co. Ltd.
792-7 Yeoksam-Dong
Kangnam-Gu, 135-080
Seoul, Korea
Phone +82 2 2194 3300
Fax +82 2 2194 3397
export@wago.com
Kosovo
Kuwait
Kuwait Controls Company
Al Sour Street, Above Lufthansa Airline
Safat Kuwait 13062
Phone +965 222 54300
Fax +965 224 33698
info.uae@wago.com
Latvia
INSTABALT LATVIA SIA
Vestienas iela 6
Rga, LV-1035
Phone +371 790 1188
Fax +371 790 1180
info@instabalt.lv
Lebanon
Gemayel Trading & Contracting
Antonins Project
P.O. BOX 70-1096
Antelias, Lebanon
Phone +961 4 521 029
Fax +961 4 521 029
gtc.libanon@gmail.com
WAGO Worldwide Companies and Representatives
452
10
Lithuania
INSTABALT LIT UAB
Savanori 187
Vilnius, 2053
Phone +370 52 322 295
Fax +370 52 322 247
info@instabalt.lt
Luxembourg
please contact WAGO Belgium
Macedonia
Malaysia
WAGO Representative Oce Malaysia
No 806, Block A4, Leisure Commerce Square,
No 9, Jalan PJS 8/9, 46150 Petaling Jaya,
Selangor Darul Ehsan, Malaysia
Phone +60 3 7877 1776
Fax +60 3 7877 2776
kian.guan.tan@wago.com
HPH Materials (M) Sdn Bhd
No. 4, Jalan Nilam 1/6
Suban Hi-Tech Industrial Park
40000 Shah Alam
Selangor, D.E. Malaysia
Phone +60 3 5638 2213
Fax +60 3 5638 8213
info@hphmaterials.com
Setia Raya Teknik Sdn. Bhd.
40 & 42 Jalan SS15/4
Subang Jaya, 47500 P.J.
Selangor D.E. Malaysia
Phone +60 3 5633 5511
Fax +60 3 5633 3411
sales@setiaraya.com.my
Mexico
WAGO SA de CV
Av. Del Marques 38 Bodega 3
P. I. Bernardo Quintana
76240 El Marques, Quertaro
Phone +52 442 221 5946
Fax +52 442 221 5063
Toll-Free: 001-800-309-5975
info.mx@wago.com
Netherlands
WAGO Nederland
Laan van de Ram 19
7324 BW Apeldoorn
Phone +31 55 36 83 500
Fax +31 55 36 83 599
info-nl@wago.com
New Zealand
NHP NZ
7 Lockhart Place
Mt Wellington
New Zealand
Phone +64 9 2761967
Fax +64 9 2761992
export@wago.com
Norway
WAGO Norge NUF
Jerikoveien 20
1067 Oslo
Phone +47 22 30 94 50
Fax +47 22 30 94 51
info.no@wago.com
Pakistan
FuziLogiX Automation & Control
Suit No. 14, 5th Floor, Shan Arcade
New Garden Town, Lahore
Pakistan
Phone +92 42 594 1503 - 4
Fax +92 42 585 1431
info@fuzilogix.com
Peru
Desimat Peru
Av. Velasco Astete 2371
Surco Lima
Phone +51 1 2752776
Fax +51 1 2752765
export@wago.com
Philippines
please contact WAGO Singapore
Poland
WAGO ELWAG sp. z o. o.
ul. Pikna 58 a
50-506 Wrocaw
Phone +48 71 3602970
Fax +48 71 3602999
wago.elwag@wago.com
Portugal
MORGADO & CA. LDA - SEDE
Estrada Exterior da
Circunvalao 3558/3560
Apartado 1057
4435 Rio Tinto
Phone +351 22 9770600
Fax +351 22 9770699
export@wago.com
Republic of Moldova
Electroservice Slavinschi T.T.
str. Bolgarskaia 9, oce 6
2001 Kishinev
Phone +373 22 274427
Fax +373 22 224481
es@es.mldnet.com
Romania
WAGO Representative Oce Bucharest
Str. Nicolae G. Caraml Nr. 26, Bl. 1D, Et. 3, Ap. 7, Sect. 1, OP52
014144-Bucuresti, Romania
Tel. +40-(0)31 421 85 68
Fax +40-(0)21 232 02 31
info-ro@wago.com
VDR & Servicii srl
Str. Valeriu Branite, nr. 60, ap.1, sector 3
Romania
Phone +40 21 3225074/76
Fax +40 21 3225075
oce@componente-automatizari.ro
Russia
WAGO Kontakt Rus
Gostinichny proezd 4B
127106 Moscow
Russia
Phone +7 495 9874790
Fax +7 495 9874791
info.ru@wago.com
WAGO Branch oce
Ekaterinburg
Phone +7 343 216 3426
WAGO Branch oce
Novosibirsk
Phone +7 383 217 9244
WAGO Branch oce
St. Petersburg
Phone +7 812 312 1918
Saudi Arabia
Ali Zaid Al Quraishi & Partners Electrical Services of S.A.
Al Quraishi Center, King Khalid Street
P.O. Box 7386
Dammam - 31462
Phone +966 3 8351155
Fax +966 3 8352297
info.uae@wago.com
Serbia
Tagor Electronic doo
Tihomira Brankovica 21
18000 Nis
Tel. +381 18 575545
Fax +381 18 217125
ana.aleksic@tagor.rs
Singapore
WAGO Electronic Pte Ltd
10 Upper Aljunied Link
#04-04 Johnson Controls Building
Singapore 367904
Phone +65 62866776
Fax +65 62842425
info-sing@wago.com
Slovakia
WAGO Elektrik spol. s r. o
Odborrska 52
83102 Bratislava
Tel. +421 2 4569 2503
export@wago.com
Proelektro spol. s r.o.
Na barine 22
84103 Bratislava Lama
Tel. +421 2 4569 2503
info@wago.sk
Slovenia
GENERA d.o.o.
Prevale 10
1236 Trzin
Phone +386 14393050
Fax +386 14393090
genera@genera.si
IC elektronika d.o.o.
Vodovodna cesta 100
1000 Ljubljana
Phone +386 15680110
Fax +386 15689107
info@ic-elect.si
South Africa
Shorrock Automation (Pty) Ltd
Postnet Suite # 219
Private Bag X 8,Elardus Park
0047 Pretoria
Phone +27 12 4500300
Fax +27 12 4500322
sales@shorrock.co.za
Spain
DICOMAT S.L.
Avda. de la Industria, 36
Apartado Correos, 1.178
28108 - Alcobendas (Madrid)
Phone +34 91 6621362
Fax +34 91 6610089
info@dicomat.com
Sweden
WAGO Sverige
WAGO Kontakttechnik GmbH
Tyskland Filial
Box 639, 17527 Jrflla
Datavgen 9 A, 17543 Jrflla
Phone +46 858410680
Fax +46 858410699
info.se@wago.com
Switzerland
WAGO CONTACT SA
Rte. de lIndustrie 19
Case Postale 168
1564 Domdidier
Phone +41/26 676 75 86
Fax +41/26 676 75 01
info.switzerland@wago.com
Syria
Zahabi Co.
8/5 Shouhadaa St., P.O. Box 8262
Aleppo
Phone +963 21 21 22 235 / 6
Fax +963 21 21 24 768
info.uae@wago.com
Taiwan R.O.C.
WAGO Contact, Ltd.
5F., No.168, Jiankang Rd
Zhonghe City
Taipei County 23585, Taiwan
Phone +886 2 22250123
Fax +886 2 22251511
info.taiwan@wago.com
Thailand
WAGO Representative Oce Thailand
4th Floor, KS Building
213/6-8 Rachada Phisek Road
Ding Daeng Bangkok 10320
Phone +66 2 6935611
Fax +66 2 6935612
wago@asianet.co.th
US Power Distribution Co., Ltd.
4th Floor K.S. Building
213/6-8 Rachada Phisek Road
Ding Daeng, Bangkok 10400
Phone +66 2 2763040
Fax +66 2 2763049
wago@asianet.co.th
Turkey
WAGO Elektronik Sanayi ve Ticaret Ltd. ti.
Yukan Dudullu Mahallesi Bayraktar Bulvan
34775 mraniye - Istanbul
Trkiye
Tel. +90 216 472 1133
Fax +90 216 472 9910
info.tr@wago.com
Ukraine
NPP Logicon
Predslavinskaya street, 39, oce 303
03150 Kiev
Phone +380 44 5228019
Fax +380 44 2611803
info@logicon.ua
OOO Mikropribor
ul. Kotelnikova, 4
03115 Kiev
Phone +380 44 5369386
Fax +380 44 5369387
sales@micropribor.kiev.ua
United Arab Emirates (UAE)
WAGO Middle East (FZC)
SAIF Zone, Q4-282
P.O. Box: 120665
Sharjah, UAE
Phone +971 6 5579920
Fax +971 6 5579921
info.uae@wago.com
USA
WAGO Corporation
N120 W19129 Freistadt Road
Germantown, WI 53022
Phone +1 262 255 6222
Fax +1 262 255 3232
Toll-Free: 1-800 DIN Rail (346-7245)
info.us@wago.com
Venezuela
PETROBORNAS, C.A.
C.C. PLAZA AEROPUERTO - PISO 1 - LOCAL P1 - B - 03
(8015) UNARE - PUERTO ORDAZ - ESTADO BOLVAR
REPBLICA BOLIVARIANA DE VENEZUELA
Tel. +58 286 994 3406
Fax +58 286 994 5249
info@petrobornas.net
Vietnam
please contact WAGO Germany (Minden)
Version: 10/2011
Current addresses at www.wago.com
453
10
10
Notes
454
10
455
10
10
5
1
2
6
6
1
3
8

0
8
8
8
-
6
0
0
4
/
0
3
0
0
-
3
6
0
1

C
a
t
a
l
o
g

I
N
T
E
R
F
A
C
E

E
L
E
C
T
R
O
N
I
C

2
0
1
2

G
B

0
6
/
2
0
1
2
-
0
0

P
r
i
n
t
e
d

i
n

G
e
r
m
a
n
y

S
u
b
j
e
c
t

t
o

d
e
s
i
g
n

c
h
a
n
g
e
s

Интерфейсные модули 2012

Uploaded by

Copyright:

Available Formats

Интерфейсные модули 2012

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Интерфейсные модули 2012

Uploaded by

Copyright:

Available Formats

INTERFACE ELECTRONIC

WAGO trademarks are brand names or territorial registered marks

The Connection System

-SYSTEM and X-COM

Connectors for Junction Boxes

ll7 Moou|ot l,OSS!LM, ll7 |oc| l,OSS!LM

MINI special Connectors

MIDI special Connectors

IDC Flat Cables

connection for solid wires and

Transducers / Relay and

devices (for example 857-800) and

DTMs. This wizard

transducer via a two-

transducer. One measuring

transducers. This value,

Contact material Properties and use Range of values

technology, which provides safe

pluggable terminations permit

provides fast, vibration-proof

provides fast, vibration-

provides fast, vibration-

WAGO Overvoltage Protection

terminations for conductors

Transducers / Relay and

Relay Socket with Miniature Switching Relay 50 52

Relay Socket with Solid State Relay 54 61

Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 14

Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 14

Relay Socket with Miniature Switching Relay

relay socket with miniature switching

relay socket with miniature switching

Relay Socket with Solid State Relay

relay socket with solid state relay, for

relay socket with solid state relay, for

Relay Socket with Solid State Relay

relay socket with solid state relay, for

relay socket with solid state relay, for

Relay Socket with Solid State Relay

relay socket with solid state relay, for

relay socket with solid state relay, for

8-Channel Adapter for System Wiring

8-channel adapter for system wiring 857-981 1 857-982 1

231 Series with CAGE CLAMP

8-channel adapter for system wiring 857-986 1

Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 14

socket for miniature switching relay

socket for miniature switching relay

socket for miniature switching relay

(WAGO 236 Series) CAGE CLAMP

(WAGO 236 Series)

(WAGO 231 Series) CAGE CLAMP

(WAGO 236 Series)

(WAGO 236 Series) CAGE CLAMP

(WAGO 236 Series)

(WAGO 236 Series)

(WAGO 236 Series) CAGE CLAMP

(WAGO 236 Series)

(WAGO 236 Series)

(WAGO 236 Series) CAGE CLAMP