DDR4 Brochure 0

Samsung DDR4 SDRAM
The new generation of high-performance, power-efficient memory that delivers greater reliability for enterprise applications
DDR4 SDRAM
An optimized memory for enterprise-level workloads
Meet diverse enterprise workload demands with higher bandwidth and reduced power consumption
Accelerated adoption of cloud computing, virtualization and high-performance computing (HPC) technologies has made higher-performing, higher-density memory a key factor for server operation. Highly virtualized environments enable companies to run numerous applications on a single server instead of multiple servers. A single server with more virtual machines (VMs) requires not only a higher processor speed, but also higher density in memory. Requirements for memory become more diverse to support a wide range of enterprise server applications from less critical workloads to mission-critical workloads. Enterprise-level workloads, such as database or transaction processing run on high-end servers, need a large capacity of in-memory systems and higher reliability. Mid-range servers used for virtualization or consolidation require high bandwidth and scalability. Small form factor, less power and low cost are essential requirements for workloads on low-end servers used as web, collaboration and infrastructure systems. Rising energy costs and the need to provide greater environmental sustainability are also placing demands on chipmakers and server vendors. A server running a virtualized environment can achieve a higher utilization which, in turn, increases the total power consumption of server. As a result, CPU and server companies are focusing intently on the development of next-generation green IT systems. The memory that supports next-generation, green IT systems should meet the diverse demands of enterprise workloads with higher performance, increased density, improved reliability and low power consumption.
with new system circuit architecture to deliver higher performance with low power requirements than previously available memory products. The Samsung portfolio of DDR4-based modules using 20 nm-class process technology includes registered dual inline memory modules (RDIMMs) and load-reduced DIMMs (LRDIMMs). These memory modules are available with initial speeds up to 2400 Mbps, increasing to the Joint Electron Devices Engineering Council (JEDEC)-defined 3200 Mbps. The portfolio includes the following modules: 8 GB DDR4 RDIMMs 16 GB DDR4 RDIMMs 32 GB DDR4 RDIMMs and LRDIMMs 64 GB DDR4 LRDIMMs 128 GB DDR4 LRDIMMs
Doubled bandwidth, along with reduced voltage and dramatically lower power consumption, improves performance and optimizes the total cost of ownership (TCO). Samsung DDR4s enhanced reliability, availability and serviceability (RAS) features provide enhanced reliability and improved signal integrity (S/I).
Voltage Speed
3,200Mbps 3.3V 1.8V 1,600Mbps 1.2V 1.35V
1,866Mbps 2.5V
133Mbps 400Mbps
800Mbps
1.5V
Samsung DDR4 SDRAM Provide an optimized solution for enterprise applications

Samsung DDR4 is an optimized solution for highly virtualized environments, high-performance computing and networking. Semiconductor modules of Samsung DDR4 are designed
SDR
DDR
DDR2
DDR3
DDR3L
DDR4
Figure 1. High speed and low voltage of DDR4 SDRAM
Lower power memory consumption with higher capacity and performance
[GB per second] 50 43.74 37.5 31.25 25 18.75 12.5 6.25

DDR2-1600, 128-bit =25.6GB/s
DDR4
DDR4-3200, 128-bit =51.2GB/s
DDR4-2400, 128-bit =38.4GB/s DDR4-2133, 128-bit =34GB/s DDR3-1866, 128-bit =30GB/s
DDR4-2666, 128-bit =42.7GB/s
DDR3-1333, 128-bit =21.3GB/s DDR3-1066, 128-bit =17.0GB/s DDR2-667, 128-bit =10.6GB/s DDR2-533, 128-bit =8.5GB/s
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
Figure 2. DDR4 higher performance compared with DDR3L and DDR2
Increase performance for higher bandwidth

Samsung DDR4 delivers higher performance at a higher speed than DDR2 and DDR3. DDR4 can achieve more than 2 Gbps per pin beyond 30 Gbps bandwidth. Compared to DDR3L (low power DDR3), Samsung DDR4 shows overall performance improvement in every DIMM and approximately 30 percent better performance at 1 DIMM per channel.
[1DIMM/ch] 2133Mbps 1866Mbps 1600Mbps 33% 1333Mbps 40% 800Mbps 67% 1333Mbps [2DIMMs/ch] [3DIMMs/ch]
[Operating voltage]
[V] 3 2.5 2 1.5 1 0.5 0
28% 17%
2.5V 1.8V 1.5V
1.35V
10%
11%
1.2V
DDR3L
DDR4
DDR3L
DDR4
DDR3L
DDR4
DDR
DDR2
DDR3
DDR3L
DDR4
Figure 3. DDR4 provides an optimized server solution for high capacity and performance compared to DDR3L. Note: The test result is based on RDIMM, chipset POR.
Figure 4. Reduced operating voltage requirements of DDR4 compared to DDR3L
[Normalized power consumption]
Reduce power usage for greener, lower-cost computing

A major decrease in voltage and the improved input/output (I/O) power efficiency of DDR4 synchronous dynamic RAM (SDRAM) translates into significant cost savings. According to Samsung internal testing, DDR4 operates at 1.2 V, a voltage that is 11 percent lower than the 1.35 V consumed by DDR3L. DDR4 consumes 37 percent less power than DDR3L when running an identical process at the same speed. DDR4 adopts a Pseudo Open Drain (POD) interface to reduce I/O power consumption and increase power savings by 50 percent compared to DDR3L under 4 Gb-based 16 GB 2 DIMMs per channel (DPC) conditions.
[W] 8
1x 0.8x
4.13 3.23
IO Power
Core Power
0.73x
2.65
37%
0.46x
2.04 1.48
20nm DDR4
3.49
2.88
30nm DDR3L
2.88
20nm DDR3L
40nm DDR3
Figure 5. Reduced normalized power consumption requirements of DDR4 compared to DDR3L
100 percent detection of random 1- to 2-bit errors
+CRC
For Reliability: DQ
0100 00 0100 001011
+Parity
DDR3
For Reliability: CMD/ADD
0100 00 0100 001

Control
+Per DRAM Addressability

For Better S/I: Vref setting
DDR4
+Gear Down Mode

For Better S/I: High Speed
CLK 2N mode
Figure 6. RAS feature comparison of DDR3 and DDR4 SDRAM
Provide greater reliability, availability and serviceability (RAS)

Samsung DDR4 represents a significant advancement in the following RAS features resulting in enhanced reliability and improved S/I for mission-critical enterprise applications. DDR3 modules provided only one RAS feature, error-correcting code (ECC) capability. Compared to DDR3, DDR4 provides more robust RAS features, such as CRC, Parity, Per DRAM Addressability and Gear Down Mode.
3. Per DRAM Addressability for enhanced signal integrity

DDR4 can control module components and enhance signal integrity by controlling the ODT of Vref level.
4. Gear Down Mode for improved signal integrity

DDR4 Gear Down Mode allows a high speed of DQ to be maintained while decreasing the high speed of CMD/ADD.
1.Cyclic redundancy check (CRC) for improved data reliability

CRC is an error-detecting code that detects accidental changes to raw data of DRAMs DQ. It confirms 100 percent detection of random 1- to 2-bit errors by enabling error detection capability for data transfer.
Fault-tolerant, higher RAS systems supported by DDR4 SDRAM can remain available for longer periods of time without failure.
2. On-chip parity detection for the integrity of Command/Address

Parity for Command/Address (CMD/ADD) provides a method of verifying the integrity of command and address transfers over a link.
Samsung DDR4 SDRAM
Manage a range of enterprise workloads with greater reliability, doubled bandwidth and reduced power usage
Designed with advanced system circuit architecture, Samsung DDR4 supports a wide range of server memory needs by delivering higher performance and reduced power usage with increased reliability. With advanced features of Samsung DDR4, companies can achieve greater performance at a lower TCO.
DDR3 and DDR4 specifications and features comparison

Feature Component density, speed Module density
Voltage (VDD, VDDQ, VPP) Vref
DDR3
512 Mb - 4 Gb 0.8 - 2.1 Gbps 1, 2, 4, 8, 16, 32 and 64 GB 1.5 V,1.5 V, NA (1.35 V, 1.35 V, NA) External Vref (VDD, 2) Center Tab Termination (CTT) (34 ohm) CTT Bi-dir, diff 8 banks 1 KB,1 KB, 2 KB 8 bits RESET, ZQ, Dynamic ODT 78, 96 BGA R, LR, U, SoDIMM 240 (R, LR, U), 204 (So)
DDR4
4 Gb - 8 Gb 1.6 - 3.2 Gbps 8, 16, 32, 64 and 128 GB 1.2 V, 1.2 V, 2.5 V Internal Vref (need training) POD (34 ohm) CTT Bi-dir, diff 16 banks (4-bank group) 512 B, 1 KB, 2 KB 8 bits RESET, ZQ, Dynamic ODT CRC, Data Bus Inversion (DBI), Multi preamble 78, 96 BGA R, LR, ECC U/SoDIMM 284 (R,LR, ECC U), 256 (ECC So)
Interface
Data I/O CMD, ADDR I/O Strobe Number of banks Page size (X4, 8, 16)
Core architecture
Number of prefetch Added functions Package type, balls (X4, 8, X16)
Physical
DIMM type DIMM pins
Legal and additional information
About Samsung Electronics Co., Ltd.

Samsung Electronics Co., Ltd. is a global leader in technology, opening new possibilities for people everywhere. Through relentless innovation and discovery, we are transforming the worlds of televisions, smartphones, personal computers, printers, cameras, home appliances, LTE systems, medical devices, semiconductors and LED solutions. We employ 236,000 people across 79 countries with annual sales of US$187.8 billion. To discover more, please visit www.samsung.com.
Copyright 2013 Samsung Electronics Co. Ltd. All rights reserved. Samsung is a registered trademark of Samsung Electronics Co. Ltd. Specifications and designs are subject to change without notice. Non-metric weights and measurements are approximate. All data were deemed correct at time of creation. Samsung is not liable for errors or omissions. All brand, product, service names and logos are trademarks and/or registered trademarks of their respective owners and are hereby recognized and acknowledged. Samsung Electronics Co., Ltd. 416, Maetan 3-dong, Yeongtong-gu Suwon-si, Gyeonggi-do 443-772, Korea www.samsung.com
For more information

For more information about Samsung DDR4 SDRAM, visit www.samsung.com/semiconductor.
2013-06

DDR4 Brochure 0

Uploaded by

Copyright:

Available Formats

DDR4 Brochure 0

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DDR4 Brochure 0

Uploaded by

Copyright:

Available Formats

Samsung DDR4 SDRAM

An optimized memory for enterprise-level workloads

Samsung DDR4 SDRAM Provide an optimized solution for enterprise applications

Figure 1. High speed and low voltage of DDR4 SDRAM

Lower power memory consumption with higher capacity and performance

[GB per second] 50 43.74 37.5 31.25 25 18.75 12.5 6.25

DDR4-3200, 128-bit =51.2GB/s

DDR4-2400, 128-bit =38.4GB/s DDR4-2133, 128-bit =34GB/s DDR3-1866, 128-bit =30GB/s

DDR4-2666, 128-bit =42.7GB/s

Figure 2. DDR4 higher performance compared with DDR3L and DDR2

Increase performance for higher bandwidth

Figure 4. Reduced operating voltage requirements of DDR4 compared to DDR3L

[Normalized power consumption]

Reduce power usage for greener, lower-cost computing

Figure 5. Reduced normalized power consumption requirements of DDR4 compared to DDR3L

100 percent detection of random 1- to 2-bit errors

0100 00 0100 001011

For Reliability: CMD/ADD

0100 00 0100 001

+Per DRAM Addressability

+Gear Down Mode

Figure 6. RAS feature comparison of DDR3 and DDR4 SDRAM

Provide greater reliability, availability and serviceability (RAS)

3. Per DRAM Addressability for enhanced signal integrity

4. Gear Down Mode for improved signal integrity

1.Cyclic redundancy check (CRC) for improved data reliability

2. On-chip parity detection for the integrity of Command/Address

Samsung DDR4 SDRAM

DDR3 and DDR4 specifications and features comparison

Number of prefetch Added functions Package type, balls (X4, 8, X16)

DIMM type DIMM pins

Legal and additional information

About Samsung Electronics Co., Ltd.

For more information

You might also like