Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 106 views

    Model 5550brochure

    Uploaded by

    Rodolfo Santesqui
    The Model 5550 HPHT Viscometer uses the rotor and bob geometry accepted by the energy industry. The instrument's temperature control system uses a sliding carbon-block heater. The proprietary design of the bob's shaft serves as a very effective climb arrestor.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Model 5550brochure

    Uploaded by

    Rodolfo Santesqui
    106 views2 pages
    The Model 5550 HPHT Viscometer uses the rotor and bob geometry accepted by the energy industry. The instrument's temperature control system uses a sliding carbon-block heater. The proprietary design of the bob's shaft serves as a very effective climb arrestor.

    Original Title

    Model 5550Brochure (1)

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Model 5550 HPHT Viscometer uses the rotor and bob geometry accepted by the energy industry. The instrument's temperature control system uses a sliding carbon-block heater. The proprietary design of the bob's shaft serves as a very effective climb arrestor.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    106 views2 pages

    Model 5550brochure

    Uploaded by

    Rodolfo Santesqui
    The Model 5550 HPHT Viscometer uses the rotor and bob geometry accepted by the energy industry. The instrument's temperature control system uses a sliding carbon-block heater. The proprietary design of the bob's shaft serves as a very effective climb arrestor.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Model 5550

    HPHT VISCOMETER
    A Critical Tool for Oil Field Fluids The Model 5550 HPHT Viscometer is a concentric cylinder viscometer that uses the rotor and bob geometry accepted by the energy industry. Its design meets the requirements set forth in ISO and API standards for viscosity measurement of completion fluids at high pressure and high temperature.

    Engineering Excellence for Superior Performance The small, bench-top Model 5550 is engineered with a number of features that make it both highly accurate and very reliable. The instruments temperature control system uses a sliding carbon-block heater which provides precise control while eliminating the oils and circulators associated with liquid high-temperature baths. The rotor drive employs an accurate, high precision speed control system for precise shear rate control. Torque measurements are performed by a highly accurate digital sensor which is external to the sample cell to avoid corrosion or abrasion. The proprietary design of the bobs shaft serves as a very effective climb arrestor which keeps the sample in the measurement region of the cell and away from critical rod seals and bearings. This combination of benefits provides better test results while prolonging the life of key components. Should the bobs shaft bearings need replacing, a user will be pleased to discover that he can replace them in less than ten minutes compliments of the best-engineered design on the market.

    FEATURES External
    Digital Measurement Torque

    Dry, Carbon Heating Block


    Simplified Head Design

    Highly Effective Gel Climb Arrestor And Control Software

    Rheo 5000 Data Acquisition Automatic Calibration C-276 HASTELLOY


    Wetted Components

    2001 North Indianwood Avenue, Broken Arrow, OK 74012 Phone: 918-250-7200 Fax: 918-459-0165 2008, by AMETEK, Inc. All rights reserved. e-mail: chandler.sales@ametek.com www.chandlereng.com

    Operational Simplicity The Model 5550 Viscometer is simple to operate. All of the basic operational controls are conveniently located on the front panel. Test schedule programming, control and data acquisition are provided by the Chandler Rheo 5000 software, which operates on an independent computer. The control system provides automatic temperature and pressure profile control, motor speed profiles, and automatic calibration capabilities. The software also features real time displays of test parameters and results. All data is easily exported to a spreadsheet file for archiving and data sharing.

    Specifications
    Temperature, Maximum Pressure, Maximum Shear Rate Range** Shear Rate Accuracy Shear Stress, Maximum Cool Down Heating Power Heater Style Data Acquisition Wetted Parts Tech Standards Utilities Power Requirements Physical Dimensions Dimensions (w x d x h) Weight: 500F / 260C 2,000 psi / 13.9 MPa 0.17 to 1700 sec-1 (0.1 to 1000 rpm) with standard R1 rotor & B1 bob combination 0.01 rpm 4900 dyne/cm2 (F440 spring)** Less than 15 minutes typical 1200 watts Oil-Free sliding carbon block Rheo 5000 Application & Control Software HASTELLOY C-276 Rotor, Bob and Bob Shaft - Standard ISO 13503-1, API RP 39

    110VAC 11A, 50/60 Hz or 220VAC 6A, 50/60 Hz 10%

    11 in. x 16 in. x 25 in. / 30 x 41 x 56 cm 80 lb / 36 kg

    Manufacturers specifications subject to change without notice **Several bob and rotor combinations are available.

    CHANDLER ENGINEERING
    2001 North Indianwood Avenue, Broken Arrow, OK 74012 Tel: +1 918-250-7200 Fax: +1 918-459-0165 e-mail:chandler.sales@ametek.com www.chandlereng.com
    Printed in the U.S.A.

    Houston Sales and Service


    4903 W. Sam Houston Parkway, N., Suite A-400, Houston, TX 77041 Tel: +1 713-466-4900 Fax: +1 713-849-1924
    XM808PDF (360000)

    2008, by AMETEK, Inc. All rights reserved.

    You might also like