Warning

PCUM0758B

Daikin Industries, Ltd.s products are manufactured for export to numerous countries throughout the
world. Daikin Industries, Ltd. does not have control over which products are exported to and used in a
particular country. Prior to purchase, please therefore confirm with your local authorized importer,
distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for
use, in the region where the product will be used. This statement does not purport to exclude, restrict
or modify the application of any local legislation.
Ask a qualified installer or contractor to install this product. Do not try to install the product yourself.
Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or
contractor to install those parts and accessories. Use of unauthorized parts and accessories or
improper installation of parts and accessories can result in water or refrigerant leakage, electrical
shock, fire or explosion.
Read the User's Manual carefully before using this product. The User's Manual provides important
safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.

Cautions on product corrosion

1. The units should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.
2. If the unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the unit
close to the sea shore, contact your local distributor.

Dealer
Head Office:
Umeda Center Bldg., 2-4-12, Nakazaki-Nishi,
Kita-ku, Osaka, 530-8323 Japan
Tokyo Office:
JR Shinagawa East Bldg., 2-18-1, Konan,
Minato-ku, Tokyo, 108-0075 Japan

http://www.daikin.com/global_ac/
c All rights reserved
Printed in China 08/09/003 AK

Specifications, designs and other content appearing in this brochure are current as of August 2009 but subject to change without notice.

Water-Cooled
Single-Screw Chiller
R-134a ZUWM Series

High Reliability Single-Screw Compressor

The semi-hermetic single-screw
compressor has features such as
high-efficiency, energy saving,
stability, quietness, few operation
components and high durability.

High-efficiency Single-Screw
Compressor

Features of Single-Screw Compressor

Axial Force Balance
With opposing and equal suction pressure at both
ends of the screw member, the huge thrust loads of
twin-screw compressor design are eliminated.

Balance Compression Design to

Prolong the Bearing Durability
The bearing durability of the single-screw
compressor is three or five times that of twinscrew compressor.

Radial Force Balance

Gate rotors on both sides of the screw member
compressing simultaneously balanced radial
loading on the rotating screw, which nearly
eliminates bearing wear. This is a sharp contrast
with twin-screw designs whose bearing size is
limited and higher loads directly impact bearing life.

Easy to Maintain
The gate rotor box is designed with disassembly side
cover, which makes the regular examination easy.
Disassembling and installing the pipe provide a
direct way to examine the internal components
of the compressor.

Twin-screw is with unbalance loading. Without

balance compression, the twin-screw increases
axial loads and radial loads, and it increases
abrasion, which affects the bearing life.
The frame for single-screw compressor has a well-balanced
compression mechanism which cancels the screw rotor load
in both the radial and axial directions. Inherent to the basic
single-screw compressor design is the virtually load-free
operation, which gives main bearing design life of 3-4 times
greater than twin-screws, and eliminates expensive and
complicated thrust balancing schemes. The two exactly
opposed gate rotors create two exactly opposed
compression cycles. Compression is made at the lower and
upper parts of the screw rotor at the same time, thus
canceling the radial loads. Also, both ends of the screw
rotor are subjected to suction pressure only, which
cancels the axial loads and eliminates the huge thrust
loads inherent in twin-screw compressors. Oil injection is
used for these compressors in order to get high COP at
high condensing pressure. ZUW units are provided with
a high efficiency oil separator to maximize oil extraction.
Compressors have a variable capacity control down to
30% of its total capacity. This control is made by means
of capacity slides controlled by microprocessors.
Standard method of starting is star-delta to realise
minimum starting current; Soft start type is available
as an option.
1

High Durability and Reliability

With equalizing compression, the single-screw can
reduce the bearing load to extend the bearing
durability. The gate rotor, which is made of
high-intension synthetic material, can keep
minimum clearance to realise the operation
is under no abrasion. The oil-ejection and liquidejection design of the compressor enable the
overheat-gas to decline to the minimum, which
eliminates to decompose the oil and refrigerant in an
overheated condition.

Low Noise and Low Vibration

The single-screw compressor keeps balancing the
load in operation to reduce vibration and noise.
It does not contact metal in compression, which
eliminates high-frequency noise.
Abnormity discharge chamber design eliminates
discharge noise.

High-efficiency Oil Separator

The system is equipped with high-efficiency oil
separator to improve the oil-separating efficiency
to 99.7%, This way, the reliability and efficiency
are improved in compressor operation.

Few Operation Components

The single-screw compressor is equipped with
only five operation components: a screw rotor,
two gaterotors and two energy adjusting slide valve.
The screw rotor is partly painted with aluminum, and
the gate rotor is equipped with eleven-tooth high
strength compound material.

The Design of the Gate rotor and

Rotors
The single-screw compressor, with design and
special gate rotor material, has no need for metal
hermetic requirement between the gate rotor and
rotors. The liquid refrigerant is more effective with its
hermetic design when the compressor operates. As
the interval between the teeth is very small and the
resistance is very low, the unit's efficiency is
improved.
2

Chiller Features
High Performance Flooded Evaporator
Flooded shell-and-tube evaporator operating with refrigerant in shell and
water in tubes. Replaceable water tubes are fabricated from integral
finned copper and mechanically bonded to steel tube sheets. Water side
working pressure is designed for 1.0MPa. Vessels Include spring loaded
pressure relief valves. Shell and non-connection water heads are
insulated with 3/4 thick closed cell insulation. Standard configuration on
water connections side is two passes and victaulic ready with groove
only.

Servo Controlled Modulating Liquid

Level Regulators
ZUW are equipped with a modulating servo-controlled main expansion
valve type controlled by a pilot float valve type to modulate refrigerant flow
to the evaporator, proportionally to the required capacity.
This enables a stable regulation and economic operation for low possible
operating cost.

Water Volume in Chilled Water System

Condenser
Shell-and-tube type operating with refrigerant in shell and water in tubes.
Replaceable water tubes are fabricated from integral finned copper and
mechanically bonded to steel tube sheets. Water side working pressure
is designed for 1.0MPa. Standard configuration on water connections
side is two passes and victaulic ready with groove only.

Efficient Operation on Part Load

Condition
The majority of comfort cooling systems operate at 60% or less of
building design load for most of the year. For that reason, ZUW chiller is
designed to obtain part load performance. This is achieved by a
combination of individual component features that include compressor
design, operating control, and more heat transfer surface with only one
compressor running.

The chilled water system should have a minimum water content to avoid
excessive compressor starts and stops. During the span of one hour there
should be no more than 3 starts per compressor. The plant side should
therefore realise that the overall water volume allows a more constant
functioning of the unit and consequently great comfort.
The minimum water volume should be calculated using this simplified
formula:
(1) Q=35.83 x P (kW) x 1
T (C) N
Where:
Q = Minimum content of the plant expressed in liters.
P = Cooling capacity of the plant expressed in kW.
T = Entering/leaving water temperature difference of the evaporator
expressed in C.
N = Number of compressors.

Microprocessor Controller
General Description
Microprocessor control as standard on all
the units; A display illustrates the machine's

Control section - main features:

operating status and programmable

parameters (set points) e.g. water

temperatures and refrigerant pressures and

temperatures, allowing the operator to

determine the unit status and also allowing
changes to various setpoints. It uses
sophisticated software with predictive logic
to select the energy efficient combination
of compressors. The compressors are

Management of the compressor capacity based on load requirements and unit safety parameters
Automatically sequence compressors in case of a safety shutdown to prevent disruption in cooling
capability while at the same time notifying the operator of a potential problem.
Display of evaporator entering/leaving water temperature
Display of condensing-evaporating temperature and pressure, superheat temperature
Evaporator leaving water temperature regulation (also available entering water regulation).
Compressors and evaporator/condenser pumps hours counter
Display of Status Safety Devices
Numbers of starts and operating hours of each compressor automatic balance
4~20mA demand limit
High evaporator temperature start

Safety protection

automatically rotated to realise equal

High pressure (pressure switch)

Compressor overload
Low Delta Pressure between Suction and
Discharge

Low pressure (pressure switch)

High Discharge Temperature on the compressor

Freeze protection

operating hours. Microprocessor device

protects critical components in response to

System security

external signals from its system sensors

Phase monitor
Remote on/off input without alarm signaling

measuring: motor temperatures, refrigerant

gas and oil pressures, correct phases
sequence and phase loss.

Chilled water temperature control

Stabilized PID (Proportional - Integral - Derivative) regulation by microprocessor via analysing the
signal sensed by the evaporator leaving water sensor.

Advanced control function

Lead-lag load balance function

Multi-chiller control (optional)

PC remote control
Profibus / BACnet to BAS (optional)*

BACnet is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning

Engineers (ASHRAE).
5

Technical Specifications
Model

Technical Specifications

for ZUW-M Series

ZUW110AM ZUW135AM ZUW150AM ZUW170AM ZUW220AM ZUW240AM ZUW265AM ZUW280AM ZUW300AM

kW

377.0

457.1

514.8

591.9

753.1

833.4

913.2

970.8

Btu/h 1,286,300 1,559,600 1,756,500 2,019,600 2,569,600 2,843,600 3,115,800 3,312,400 3,507,500

Capacity

kcal/h

324,200

393,100

442,700

509,000

647,700

716,700

785,400

834,900

884,100

U.S.RT

107.2

130.0

146.4

168.3

214.2

237.0

259.7

276.1

292.4

kW

63.7

76.5

83.6

98.5

130.2

142.9

157.4

164.7

172

100%

5.92

5.98

6.16

6.01

5.78

5.83

5.80

5.90

5.98

75%

7.16

7.22

7.43

7.27

6.77

6.85

6.77

6.88

6.98

50%

8.00

8.07

8.31

8.15

9.83

9.97

9.86

9.95

10.15

25%

7.14

7.19

7.41

7.29

8.42

8.71

8.46

8.63

8.71

Evap. Water Flow

L/s

18.0

21.9

24.6

28.3

36.0

39.9

43.7

46.4

49.2

Evap. Pressure Drop

kPa

24.5

34.2

24.9

28.0

27.9

30.7

36.9

47.6

Cond. Water Flow

L/s

21.1

25.5

28.6

33.0

42.3

46.7

51.2

Cond. Pressure Drop

kPa

32.7

26.4

26.8

34.5

31.9

32.8

39.7

Power Input

2 COP

Compressor

Quantity
Speed

r.p.m

1499.9

1557.6

1630.0

1717.1

1789.7

1 Cooling

Btu/h 3,782,200 4,076,700 4,445,500 4,721,500 4,920,100 5,117,700 5,314,500 5,561,600 5,858,700 6,106,500

Capacity

kcal/h 953,300 1,027,500 1,120,500 1,190,100 1,240,100 1,289,900 1,339,500 1,401,800 1,476,700 1,539,100
410.1

426.6

443.0

463.6

488.4

509.0

kW

187.3

201.9

220.4

234.1

240.7

248.9

256.4

271.1

285.3

300.4

100%

5.92

5.92

5.91

5.91

5.99

6.03

6.07

6.01

6.02

5.96

75%

6.96

6.90

7.29

7.23

7.28

7.37

7.43

7.38

7.40

7.30

50%

10.24

10.06

9.08

9.05

9.10

9.13

9.31

9.34

9.25

9.17

25%

8.92

8.63

10.18

9.79

9.94

10.05

10.07

10.22

10.40

9.93

Evap. Water Flow

L/s

53.0

57.2

62.3

66.2

69.0

71.8

74.5

78.0

82.1

85.6

48.8

Evap. Pressure Drop

kPa

51.9

54.6

82.0

86.2

86.1

81.0

85.6

92.8

86.2

92.8

54.3

57.4

Cond. Water Flow

L/s

62.0

66.8

72.9

77.4

80.5

83.7

86.8

90.9

95.8

100.0

46.0

51.9

Cond. Pressure Drop

kPa

59.4

60.0

72.5

70.9

66.8

70.0

74.0

80.4

78.9

85.1

Power Input

2 COP

Semi-Hermetic Single Screw Compressor

Type

2,980

2,980

2,980

2,980

2,980

2,980

2,980

2,980

2,980

Wye-Delta

Compressor

Quantity
Speed

r.p.m

2,980

2,980

2,980

2,980

2,980

2,980

2,980

2,980

2,980

2,980

Wye-Delta

Starting Type
15%-100% Stepless Control

Capacity Control

Shell-and-Tube

15%-100% Stepless Control

10%-100% Stepless Control

Shell-and-Tube

Type
Condenser

Quantity

Quantity

Shell-and-Tube Flooded

Type

Shell-and-Tube Flooded

Type
Evaporator

Evaporator
1

Quantity

No. of circuits
Charge kg

215

215

215

215

315

315

315

350

350

Float Ball Expansion Valve

Brand

McQuay

Charge L

74

74

74

85

85

85

85

Refrigerant

No. of circuits
Charge kg

85

Satety Valve / High Pressure Switch / Low Pressure Switch / Compresor Thermal Protector /
Freeze-up Protection / Oil Temperature Switch / Oil Level Switch

Safety Devices

1
R134a

350

380

495

495

495

565

565

565

595

595

174

174

174

174

Control

Float Ball Expansion Valve

Brand

McQuay

Oil
74

Type

Control
Oil

Quantity

R134a

Type

Charge L

85

85

145

145

174

174

Satety Valve / High Pressure Switch / Low Pressure Switch / Compresor Thermal Protector /
Freeze-up Protection / Oil Temperature Switch / Oil Level Switch

Safety Devices

Evap. Water Pipe

mm

168

168

168

168

219

219

219

219

219

Evap. Water Pipe

mm

219

219

219

219

219

219

219

219

219

219

Cond. Water Pipe

mm

168

168

168

168

219

219

219

219

219

Cond. Water Pipe

mm

219

219

219

219

219

219

219

219

219

219

Cellular Polyethylene

Insulation Material

Cellular Polyethylene

Insulation Material

Shipping Weight

kg

3,283

3,332

3,469

3,507

5,368

5,407

5,432

5,702

5,739

Shipping Weight

kg

5,763

5,818

8,051

8,123

8,360

8,537

8,537

8,537

8,670

8,670

Operation Weight

kg

3,537

3,602

3,757

3,803

5,791

5,846

5,884

6,179

6,230

Operation Weight

kg

6,263

6,330

8,638

8,749

8,986

9,201

9,201

9,201

9,373

9,373

Absorbed Current

109.5

128.8

140.1

164.3

223.1

242.4

264.7

276.2

287.9

Absorbed Current

312.7

336.5

372.9

393.7

404.2

417.3

429.2

453.1

476.2

500.8

Compressor Inrush

329.7

329.7

329.7

329.7

329.7

329.7

329.7

329.7

329.7

Compressor Inrush

329.7

329.7

329.7

329.7

329.7

329.7

329.7

329.7

329.7

329.7

Unit Max Inrush

329.7

329.7

329.7

329.7

441.2

460.8

462.0

473.7

473.6

Unit Max Inrush

497.9

498.0

591.6

592.2

603.1

615.7

615.9

639.6

662.8

663.5

3 Dimension (LWH)

mm

3 Dimension (LWH)

mm

3,3401,4431,956

3,4621,6762,235

Notes:
1. Cooling capacity is based on the following conditions:
Entering evaporator water temp. 12C, Leaving evaporator water temp. 7C
Entering condenser water temp. 30C, Leaving condenser water temp. 35C
Evaporator fouling factor 0.0176 m 2C/kW, Condenser fouling factor 0.044 m 2C/kW
2. For ZUM110AM~ZUM170AM, COP at 25% load of single compressor is caculated data, actual minimum value of capacity control should
comply with the latest selection software.
3. The dimensions are just for chiller with Wye-Delta starter, excluding packing. For detailed chiller demensions with solid state starter,
please consult factory.
4. Power supply: 380V 3phase 50Hz, Voltage tolerance: 10%

1442.0

393.6

Condenser

Refrigerant

1383.8

370.6

30%-100% Stepless Control

1302.9

339.8

1194.8

315.5

Type

1108.5

U.S.RT

Starting Type
Capacity Control

kW

Semi-Hermetic Single Screw Compressor

Type

ZUW325BM ZUW350BM ZUW370AM ZUW390AM ZUW410AM ZUW430AM ZUW450AM ZUW465AM ZUW495AM ZUW510AM

Model

1028.0

1 Cooling

for ZUW-M Series

3,7641,6762,235
Conversion Formulae
kcal/h=kW860
Btu/h=kW3412

3,7641,6762,235

4,3081,9802,278

Notes:
1. Cooling capacity is based on the following conditions:
Entering evaporator water temp. 12C, Leaving evaporator water temp. 7C
Entering condenser water temp. 30C, Leaving condenser water temp. 35C
Evaporator fouling factor 0.0176 m 2C/kW, Condenser fouling factor 0.044 m 2C/kW
2. For ZUM110AM~ZUM170AM, COP at 25% load of single compressor is caculated data, actual minimum value of capacity control should
comply with the latest selection software.
3. The dimensions are just for chiller with Wye-Delta starter, excluding packing. For detailed chiller demensions with solid state starter,
please consult factory.
4. Power supply: 380V 3phase 50Hz, Voltage tolerance: 10%

Conversion Formulae
kcal/h=kW860
Btu/h=kW3412

Standard rating
Model

ZUW
110AM

ZUW
135AM

ZUW
150AM

ZUW
170AM

ZUW
220AM

ZUW
240AM

ZUW
265AM

ZUW
280AM

ZUW
300AM

ZUW
325BM

Leaving
evaporator
25
water
Cooling
temper- capacity
ature(C)
4
352.7
5
366.5
6
380.6
7
395.2
8
410.1
9
425.6
4
427.7
5
444.4
6
461.5
7
479.0
8
497.2
9
515.8
4
481.7
5
500.3
6
519.6
7
539.4
8
559.8
9
580.8
4
553.8
5
575.4
6
597.5
7
620.2
8
643.8
9
667.8
4
704.6
5
732.0
6
760.3
7
789.3
8
819.2
9
850.0
4
779.7
5
810.0
6
841.2
7
873.3
8
906.3
9
940.3
4
854.5
5
887.7
6
921.8
7
956.9
8
993.1
9
1030.2
4
908.4
5
943.7
6
979.9
7
1017.2
8
1055.6
9
1095.1
4
961.7
5
999.2
6
1037.7
7
1077.4
8
1118.2
9
1161.2
4
1037.1
5
1077.5
6
1119.0
7
1161.7
8
1205.6
9
1250.9

Standard rating

for ZUW-M Series

Entering condenser water temperature (C)

28
Power
input

Cooling
capacity

Power
input

55.9
56.1
56.3
56.5
56.8
57.0
66.9
67.2
67.4
67.7
68.0
68.3
73.0
73.4
73.7
74.0
74.3
74.6
85.9
86.3
86.7
87.0
87.6
88.0
114.2
114.7
115.2
115.8
116.3
116.8
125.1
125.7
126.3
126.9
127.5
128.1
137.8
138.5
139.2
139.9
140.6
141.4
144.1
114.8
145.5
146.3
147.0
147.7
150.4
151.2
152.0
152.8
153.5
154.3
163.5
164.4
165.3
166.1
167.0
167.9

342.8
356.3
370.1
384.4
399.0
414.1
415.8
433.6
448.8
466.0
483.7
501.9
468.2
486.5
505.3
524.7
544.7
565.2
538.4
559.4
583.1
603.3
626.4
649.9
684.8
711.7
739.3
767.7
797.0
827.1
757.9
787.5
818.0
849.5
881.8
915.0
830.6
863.0
896.4
930.8
966.2
1002.6
883.0
917.5
953.0
989.5
1027.0
1065.7
934.7
971.4
1009.1
1047.9
1087.8
1128.9
1008.0
1047.5
1088.1
1129.9
1172.9
1217.2

60.1
60.3
60.5
60.8
61.0
61.3
71.9
70.5
72.5
72.8
73.1
73.4
78.5
78.8
79.2
79.5
79.9
80.2
92.3
92.8
91.0
93.6
94.0
94.5
122.7
123.2
123.8
124.4
124.8
125.4
134.4
135.0
135.7
136.2
136.8
137.5
147.8
148.6
149.4
150.2
151.0
151.6
154.6
155.4
156.2
157.0
157.6
158.4
161.4
162.2
163.1
163.9
164.6
165.5
175.4
176.4
177.3
178.3
179.2
180.0

30
Cooling
capacity
kW
336.2
349.4
363.1
377.1
391.5
406.4
407.7
423.7
440.2
457.2
474.6
492.6
459.1
477.1
495.7
514.8
534.5
554.7
527.9
548.7
570.0
592.0
614.7
637.8
671.5
697.9
725.2
753.2
782.0
811.7
743.1
772.3
802.4
833.4
865.2
898.0
814.4
846.4
879.3
913.2
948.1
983.9
865.9
899.8
934.8
970.8
1007.8
1045.9
916.5
952.6
989.8
1028.0
1067.4
1107.9
988.4
1027.3
1067.3
1108.5
1150.9
1194.5

32

35

Power
input

Cooling
capacity

Power
input

Cooling
capacity

Power
input

63.0
63.3
63.5
63.8
64.0
64.3
75.3
75.6
76.0
76.3
76.7
77.0
82.3
82.6
83.0
83.4
83.8
84.2
96.7
97.1
97.6
98.1
98.6
99.1
128.5
129.1
129.7
130.3
130.9
131.5
140.7
141.4
142.1
142.8
143.5
144.2
154.7
155.5
156.3
157.2
158.0
158.8
161.7
162.6
163.4
164.3
165.1
166.0
168.9
169.8
170.7
171.6
172.5
173.4
183.5
184.5
185.5
186.5
187.6
188.6

329.5
342.5
355.9
369.7
384.0
398.6
399.6
415.3
431.6
448.3
465.5
483.2
449.9
467.7
486.0
504.8
524.2
544.1
517.4
537.8
558.9
580.5
602.8
625.6
658.0
684.1
710.9
738.5
766.9
796.1
728.3
757.0
786.7
817.1
848.5
880.8
798.1
829.6
862.0
895.4
929.8
965.1
848.5
882.0
916.4
951.9
988.3
1025.9
898.1
933.7
970.3
1008.0
1046.8
1086.7
968.6
1006.9
1046.3
1086.9
1128.6
1171.6

66.0
66.3
66.5
66.8
67.1
67.4
78.8
79.2
79.6
79.9
80.3
80.7
86.1
86.5
86.9
87.3
87.7
88.1
101.2
101.7
102.2
102.7
103.2
103.7
134.6
135.1
135.8
136.4
137.0
137.6
147.3
148.0
148.7
149.4
150.1
150.9
161.7
162.6
163.5
164.3
165.2
166.1
169.1
170.0
170.9
171.8
172.7
173.6
176.6
177.5
178.5
179.4
180.4
181.3
191.9
192.9
194.0
195.0
196.1
197.2

319.2
332.0
345.1
358.6
372.5
386.8
387.2
402.6
418.5
434.8
451.6
468.9
436.0
453.3
471.2
489.6
508.5
528.0
501.4
521.3
541.9
563.1
584.8
607.2
637.6
663.0
689.2
716.2
744.0
772.5
705.7
733.8
762.7
792.5
823.2
854.7
773.3
804.1
835.8
868.4
902.0
936.5
822.2
854.9
888.5
923.2
958.8
995.5
870.2
905.0
940.7
977.5
1015.4
1054.4
938.5
975.9
1014.4
1054.0
1094.8
1136.8

70.7
71.0
71.3
71.6
71.8
72.1
84.3
84.7
85.1
85.5
85.9
86.3
92.1
92.5
93.0
93.4
93.8
94.3
108.1
108.7
109.2
109.8
110.3
110.8
144.0
144.6
145.2
145.9
146.5
147.2
157.5
158.2
159.0
159.7
160.5
161.3
172.8
173.7
174.6
175.5
176.4
177.4
180.7
181.6
182.5
183.5
184.4
185.4
188.6
189.6
190.6
191.6
192.6
193.6
204.9
206.0
207.1
208.2
209.3
210.5

Model

ZUW
350BM

ZUW
370AM

ZUW
390AM

ZUW
410AM

ZUW
430AM

ZUW
450AM

ZUW
465AM

ZUW
495AM

ZUW
510AM

Leaving
evaporator
25
water
Cooling
temper- capacity
ature(C)
4
1118.2
5
1161.6
6
1206.2
7
1252.1
8
1299.4
9
1348.0
4
1219.8
5
1266.9
6
1315.5
7
1365.4
8
1416.8
9
1469.7
4
1295.6
5
1345.6
6
1397.2
7
1450.2
8
1504.7
9
1560.8
4
1350.0
5
1402.2
6
1455.8
7
1511.1
8
1567.9
9
1626.4
4
1404.1
5
1458.4
6
1572.6
7
1571.9
8
1631.1
9
1692.0
4
1458.2
5
1514.6
6
1572.6
7
1632.3
8
1693.8
9
1756.9
4
1525.9
5
1584.9
6
1645.6
7
1708.0
8
1772.3
9
1838.4
4
1607.5
5
1669.7
6
1733.6
7
1799.5
8
1867.2
9
1936.8
4
1675.4
5
1740.1
6
1806.8
7
1875.4
8
1946.0
9
2018.6

for ZUW-M Series

Entering condenser water temperature (C)

28
Power
input

Cooling
capacity

Power
input

176.2
177.1
178.0
179.0
179.9
180.9
192.4
193.5
194.5
195.6
196.6
197.7
204.9
205.8
206.8
207.8
208.8
209.8
210.5
211.5
212.5
213.5
214.5
215.5
217.8
218.8
226.4
220.9
221.9
223.0
224.2
225.3
226.4
227.5
228.6
229.7
236.8
238.0
239.2
240.4
241.5
242.7
249.1
250.3
251.6
252.8
254.0
255.2
262.1
263.4
264.8
266.1
267.4
268.7

1086.8
1129.2
1172.9
1217.9
1264.1
1311.7
1185.5
1231.7
1279.2
1328.1
1378.4
1430.1
1259.2
1308.2
1358.7
1410.5
1463.9
1518.9
1312.1
1363.2
1415.7
1469.8
1525.4
1582.7
1364.7
1417.8
1472.6
1528.9
1586.8
1646.5
1417.3
1472.5
1529.3
1587.7
1647.8
1709.7
1483.1
1540.9
1600.3
1661.4
1727.4
1789.1
1562.4
1623.3
1685.9
1750.3
1816.6
1884.8
1628.4
1691.8
1757.1
1824.2
1893.3
1964.4

189.0
190.0
191.0
192.0
193.1
193.9
206.8
207.9
209.1
210.0
211.1
212.3
219.9
221.0
222.1
223.0
224.0
225.1
226.1
227.2
228.3
229.2
230.3
231.4
233.7
234.9
236.1
237.0
238.1
239.3
240.7
241.9
243.1
244.0
245.3
246.5
254.2
255.5
256.8
258.1
259.1
260.4
267.4
268.7
270.1
271.2
272.5
273.9
281.3
282.7
284.2
285.7
286.8
288.3

30
Cooling
capacity
kW
1065.6
1107.4
1150.5
1194.8
1240.4
1287.3
1162.4
1207.9
1254.7
1302.9
1352.4
1403.4
1234.7
1283.0
1332.7
1383.8
1436.4
1490.6
1286.6
1336.9
1388.7
1442.0
1496.8
1553.2
1338.1
1390.5
1444.4
1499.9
1557.0
1615.8
1389.7
1444.1
1500.0
1557.6
1616.9
1677.8
1454.3
1511.2
1569.8
1630.0
1692.0
1755.8
1532.0
1592.0
1653.6
1717.1
1782.5
1849.7
1596.8
1659.3
1723.6
1789.7
1857.8
1927.9

32

35

Power
input

Cooling
capacity

Power
input

Cooling
capacity

Power
input

197.7
198.8
199.9
200.9
202.0
203.1
216.7
217.8
219.0
220.2
221.4
222.7
230.2
231.4
232.5
233.7
234.8
236.0
236.7
237.8
239.0
240.2
241.4
242.6
244.7
245.9
247.1
248.3
249.6
250.8
251.9
253.2
254.5
255.7
257.0
258.3
266.0
267.4
268.8
270.2
271.5
272.9
279.8
281.3
282.7
284.1
285.6
287.0
294.4
295.9
297.4
299.0
300.5
302.1

1044.2
1085.4
1127.8
1171.4
1216.4
1262.6
1139.1
1183.9
1230.0
1277.4
1326.3
1376.5
1210.0
1257.5
1306.6
1356.9
1408.7
1462.0
1260.8
1310.4
1361.4
1413.9
1467.9
1523.4
1311.2
1362.8
1416.0
1470.6
1526.9
1584.8
1361.9
1415.4
1470.5
1527.3
1585.6
1645.7
1425.2
1481.2
1538.9
1598.3
1659.4
1722.2
1501.3
1560.3
1621.1
1683.7
1748.0
1814.2
1564.8
1626.4
1689.7
1754.9
1822.0
1891.0

206.7
207.8
208.9
210.1
211.2
212.4
226.8
228.0
229.2
230.5
231.8
233.0
240.8
242.0
243.2
244.4
245.6
246.9
247.6
248.8
250.1
251.3
252.6
253.8
255.9
257.2
258.5
259.8
261.1
262.4
263.5
264.8
266.2
267.5
268.9
270.2
278.3
279.7
281.1
282.6
284.0
285.5
292.7
294.2
295.7
297.2
298.7
300.2
307.9
309.4
311.1
312.7
314.3
315.9

1011.7
1052.0
1093.4
1136.0
1179.9
1225.1
1103.7
1147.4
1192.5
1238.8
1286.5
1335.6
1172.4
1218.8
1266.7
1315.9
1366.6
1418.7
1221.7
1270.1
1319.9
1371.2
1424.0
1478.3
1270.5
1320.9
1372.8
1426.2
1481.2
1537.8
1319.6
1371.9
1425.7
1481.2
1538.2
1596.9
1381.0
1435.7
1492.1
1550.1
1609.8
1671.2
1454.7
1512.4
1571.7
1632.8
1695.7
1760.4
1516.3
1576.4
1638.3
1702.0
1767.6
1835.0

220.7
221.9
223.1
224.3
225.5
226.7
242.6
243.9
245.2
246.5
247.8
249.2
257.3
258.6
259.9
261.2
262.5
263.8
264.6
265.9
267.2
268.6
269.9
271.3
273.4
274.8
276.1
277.5
278.9
280.3
281.5
282.9
284.3
285.8
287.2
288.7
297.3
298.8
300.3
301.8
303.4
305.0
312.7
314.3
315.8
317.5
319.1
320.7
328.9
330.5
332.2
333.9
335.7
337.4

Notes:
1. Figures in
show nominal capacities and conditions.
2. Capacities are based on T=5C entering/leaving evaporator/condenser water temperature.

10

Fouling factor correction

Electrical data

for ZUW-M Series

Table1-Evaporator fouling factor correction

Chilled water
temperature
Difference(C)

Fouling factors m2.C/kW

0.0176

0.044

Nominal unit
Amps *2

Unit max inrush

Amps *3

Nominal unit
Amps *2

Unit max inrush

Amps *3

ZUW110AM

110.1

360.1

109.5

329.7

ZUW135AM
ZUW150AM

126.3

360.1

128.8

329.7

135.8

360.1

140.1

329.7

ZUW170AM

156.5

360.1

164.3

329.7

ZUW220AM

223.6

471.9

223.1

441.2

ZUW240AM

239.8

488.4

242.4

460.8

ZUW265AM

258.5

489.4

264.7

462.0

ZUW280AM

268.3

499.2

276.2

473.7

278.2

499.2

287.9

473.6

299.4

519.9

312.7

497.9

ZUW350BM

319.8

520.0

336.5

498.0

ZUW370AM

367.5

616.3

372.9

591.6

ZUW390AM

385.0

616.8

393.7

592.2

ZUW410AM

393.9

626.0

404.2

603.1

Power

ZUW430AM

405.0

636.7

417.3

615.7

415.1

636.8

429.2

615.9

Model

0.088

0.132

Cap

Power

Cap

Power

Cap

Power

Cap

Power

0.990

0.997

0.978

0.996

0.962

0.994

0.955

0.994

1.000

1.000

0.990

0.999

0.977

0.998

0.973

0.998

1.008

1.001

1.000

1.000

0.990

0.999

0.987

0.999

1.016

1.001

1.001

1.001

1.001

1.000

0.999

1.000

1.022

1.002

1.002

1.001

1.010

1.001

1.009

1.001

1.026

1.002

1.002

1.002

1.018

1.002

1.017

1.002

Standard
voltage *1

ZUW300AM
ZUW325BM

Table2-Condenser fouling factor correction

Cooling water
temperature
Difference(C)

Fouling factors m2.C/kW

0.044
Cap

0.088
Power

Cap

0.132
Power

Cap

415V-3P-50Hz

Standard
voltage *1

380V-3P-50Hz

0.990

0.997

0.989

1.008

0.989

1.016

ZUW450AM

1.000

1.000

0.999

1.011

0.999

1.019

ZUW465AM

435.5

657.1

453.1

639.6

1.008

1.001

1.008

1.012

1.007

1.019

ZUW495AM

455.2

676.9

476.2

662.8

ZUW510AM

476.2

677.5

500.8

663.5

1.016

1.001

1.015

1.013

1.014

1.020

1.022

1.002

1.021

1.013

1.020

1.020

1.026

1.002

1.025

1.013

1.025

1.021

Note:
1. Voltage tolerance 10%. Voltage unbalance between phases must be within 3%.
2. Absorbed current referred to nominal condition: 12/7C entering/leaving evaporator water temperature; 30/35C entering/leaving condenser water temperature.
3. For ZUW110AM~ZUW170AM, unit max inrush current is the inrush current.
For ZUW220AM~ZUW350BM, unit max inrush current = inrush current of compressor #2 + nominal unit current of compressor #1.
For ZUW370AM~ZUW510AM, unit max inrush current = inrush current of compressor #3 + nominal unit current of compressor #2 + nominal unit current of compressor #1.

11

12

Chiller dimension

Chiller dimension

ZUW110AM - ZUW170AM

ZUW280AM - ZUW350BM
Direction A

Direction A
g

g
30
160

252

257

440 260
1595

260
1100

2235

1956

272

120

120

214

2806

940

105
850
1278
1443

3340

345

208
293

in

341
591

725
f

d
206 206

out
a

160 160

259
359

165

165

392

3145

753
1430
1510
1676

3720

ZUW220AM - ZUW265AM

635

30

160

ZUW370AM - ZUW510AM

Direction A
Direction A
30

g
160

260
1595

260

2278

345
259
165
2840
3418

Legend:
a) Condenser water outlet
d) Evaporator outlet
g) Starter power cable slot

b) Condenser water inlet

e) Lifting hole

a
206

c) Evaporator water inlet

f ) Mounting hole 29

Notes:
1. Please contact Daikin for 3-pass unit drawings.
2. The dimensions are just for chiller Wye-Delta starter. For detailed chiller dimensions with solid starter, please consult the factory.

753
1430
1510
1676

206
b

in

410

359

290

940

out

392

f
165

165

165
3762

650

206 206

in

13

out

570

1890

635

2235

947

440

257

252

30

160

262
338

1303
1586
1786
1980

4308

Legend:
a) Condenser water outlet
d) Evaporator outlet
g) Starter power cable slot

b) Condenser water inlet

e) Lifting hole

c) Evaporator water inlet

f ) Mounting hole 32

Notes:
1. Please contact Daikin for 3-pass unit drawings.
2. The dimensions are just for chiller Wye-Delta starter. For detailed chiller dimensions with solid starter, please consult the factory.

14