Multi-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electrical Downtilt

Multi-band Panel Dual Polarization Half-power Beam Width Adjust.
Electrical Downtilt
1710 2170 X 30
0 8 set by hand or by optional RCU (Remote Control Unit)
XPol Panel 17102170 30 21dBi 08T

Type No. Frequency range Polarization Gain Horizontal Pattern: Half-power beam width Front-to-back ratio, copolar Cross polar ratio Maindirection 0 Sector 60 Sidelobe suppression Tracking, Avg. Squint Vertical Pattern: Half-power beam width Electrical tilt Sidelobe supression for rst sidelobe above main beam Impedance VSWR Isolation, between ports Intermodulation IM3 Max. power per input 1710 1880 MHz +45, 45 2 x 20.2 dBi 36 > 30 dB Typically: 20 dB > 10 dB > 14 dB
742351V01
1710 2170 1850 1990 MHz +45, 45 2 x 20.5 dBi 35 > 30 dB Typically: 20 dB > 10 dB > 14 dB 0.5 dB 1.0 1920 2170 MHz +45, 45 2 x 20.7 33 > 30 dB Typically: 20 dB > 10 dB > 14 dB
7.0 6.7 0 8, continuously adjustable 0 ... 4 ... 8 T 0 ... 4 ... 8 T 0 ... 4 ... 8 T 18 ... 17 ... 16 dB 18 ... 18 ... 17 dB 18 ... 17 ... 16 dB 50 < 1.5 > 30 dB < 150 dBc (2 x 43 dBm carrier) 300 W (at 50 C ambient temperature)
7.4
1710 1880 MHz: +45/45 Polarization
36
7.4
10
10
17102170 45
dB
17102170 +45
dB
Horizontal Pattern
Vertical Pattern 0 8 electrical downtilt
7-16 Mechanical specications Input Connector position Adjustment mechanism Wind load
7-16
35
Subject to alteration.
7.0
10
10
Horizontal Pattern
936.3977/b
33
6.7
10
10
Max. wind velocity Height/width/depth Category of mounting hardware Weight Packing size Scope of supply
2 x 7-16 female Bottom 1 x, Position bottom continuously adjustable Frontal: 540 N (at 150 km/h) Lateral: 135 N (at 150 km/h) Rearside: 640 N (at 150 km/h) 200 km/h 1304 / 299 / 69 mm M (Medium) 14 kg / 16 kg (clamps incl.) 1589 x 322 x 108 mm Panel and 2 units of clamps for 42 115 mm diameter
dB
dB
Horizontal Pattern
www.kathrein.de
dB
dB
742351V01 Page 1 of 2
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-820
Accessories General Information

Accessories
Type No. 738546 731651 85010002 85010003 737978 Description 1 clamp 1 clamp 1 clamp 1 clamp 1 downtilt kit Remarks Mast: 42 115 mm diameter Mast: 28 60 mm diameter Mast: 110 220 mm diameter Mast: 210 380 mm diameter Downtilt angle: 0 16 Weight approx. 1.1 kg 0.8 kg 2.7 kg 4.8 kg 2.3 kg Units per antenna 2 (included in the scope of supply) 2 (order separately if required) 2 (order separately if required) 2 (order separately if required) 1 (order separately if required) 9 72 64
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Material: Reector screen: Tin-plated copper. Radiator: Tin-plated zinc. Flat berglass radome: The max. radome depth is only 69 mm. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The color of the radome is grey. All screws and nuts: Stainless steel. 1304 1381 1421 1526 Adjustment mechanism with integrated scale 40 69
45 +45
Grounding:
The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: Low temperature: 55 C High temperature (dry): +60 C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathreins antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
299 Bottom view
83
Please note:
As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheet issues have now become invalid.
Page 2 of 2 742351V01
www.kathrein.de
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-820
936.3977/b
Subject to alteration.

Multi-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electrical Downtilt

Uploaded by

Copyright:

Available Formats

Multi-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electrical Downtilt

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Multi-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electrical Downtilt

Uploaded by

Copyright:

Available Formats

Multi-band Panel Dual Polarization Half-power Beam Width Adjust.

0 8 set by hand or by optional RCU (Remote Control Unit)

XPol Panel 17102170 30 21dBi 08T

1710 1880 MHz: +45/45 Polarization

Vertical Pattern 0 8 electrical downtilt

1850 1990 MHz: +45/45 Polarization

Vertical Pattern 0 8 electrical downtilt

1920 2170 MHz: +45/45 Polarization

Vertical Pattern 0 8 electrical downtilt

Accessories General Information

299 Bottom view

You might also like