80010668
80010668
80010668
Downtilt
790 862 X 65
880 960 X 65
80010668
790 862 790 862 MHz +45, 45 15.9 ... 16.0 ... 15.8 0 ... 5 ... 10 67 > 25 dB 23 dB > 10 dB 10 0 10 0 ... 5 ... 10 T 17 ... 16 ... 16 dB 880 960 880 960 MHz +45, 45 16.3 ... 16.6 ... 16.1 0 ... 5 ... 10 63 > 25 dB 25 dB > 10 dB 9.7 0 10 0 ... 5 ... 10 T 18 ... 16 ... 16 dB
50 < 1.5 > 28 dB, Typ. > 30 dB > 28 dB, Typ. > 30 dB (790 862 // 880 960 MHz) < 150 dBc (2 x 43 dBm carrier) 400 W (at 50 C ambient temperature)
125
790862 45
790862 +45
880960 45
880960 +45
10 3 0
10
7-16
dB
7-16
7-16
7-16
3 0
dB
Mechanical specications Vertical Pattern 0 10 electrical downtilt Input Connector position Adjustment mechanism Wind load 4 x 7-16 female Bottom 2 x, Position bottom continuously adjustable Frontal: 920 N (at 150 km/h) Lateral: 320 N (at 150 km/h) Rearside: 1050 N (at 150 km/h) 200 km/h 1934 / 303 / 99 mm M (Medium) 18.5 kg / 20.5 kg (clamps incl.) 2256 x 317 x 127 mm Panel and 2 units of clamps for 50 115 mm diameter
Horizontal Pattern
Subject to alteration.
130
10 3 0
10
3 0
Max. wind velocity Height/width/depth Category of mounting hardware Weight Packing size Scope of supply
936.3901/d
Horizontal Pattern
dB
www.kathrein.de
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973
dB
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Material: Reector screen: Weather-proof aluminum. Fiberglass radome: The grey berglass radomes of these antennas are very stable and extraordinarily stiff. They are resistant to ultraviolet radiation and can also be painted to match their surroundings. All screws and nuts: Stainless steel. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded.
Grounding:
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: Low temperature: 55 C High temperature (dry): +60 C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas full the stated specications after completion of the environmental tests as dened in ETS 300 019-2-4. The homogenous design of Kathreins antenna families uses identical modules and materials. Extensive tests have been performed on typical samples and modules.
Layout of interface:
99* 50 303*
111*
40
Please note:
As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheet issues have now become invalid.
Page 2 of 2 80010668
www.kathrein.de
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973
936.3901/d
Subject to alteration.