D

Dual-band Panel Dual Polarization Half-power Beam Width Adjust. Electr.
Downtilt Integrated Combiner
790 960 X 65 010 C
1710 2180 X 65 0 6
Downtilt set by hand or by optional RCU (Remote Control Unit)

XXPol Panel 790960/17102180 C 65/ 65 16/18.5dBi 010/06T
Type No. Frequency range Polarization Gain (dBi) Tilt Horizontal Pattern: Half-power beam width Front-to-back ratio, copolar Cross polar ratio Maindirection Sector Tracking, Avg. Squint Vertical Pattern: Half-power beam width Electrical tilt continuously adjustable 10.9 0.59.5 10 0.59.5 5.0 0 6 4.8 0 6 4.6 0 6 0 60 68 > 27 dB Typically: 25 dB > 10 dB 1.5 dB 2.5 65 > 28 dB Typically: 25 dB > 10 dB 65 > 30 dB Typically: 25 dB > 10 dB 65 > 30 dB Typically: 25 dB > 10 dB 0.5 dB 2.5 61 > 30 dB Typically: 25 dB > 10 dB 790960 790 862 MHz 880 960 MHz +45, 45 +45, 45
742224V02
17102180 1710 1880 MHz 1850 1990 MHz 1920 2180 MHz +45, 45 +45, 45 +45, 45 15.6 ... 15.5 ... 15.3 16.1 ... 16.0 ... 15.6 18.2 ... 18.5 ... 18.3 18.5 ... 18.7 ... 18.3 18.5 ...18.7 ... 18.3 0.5 ... 5 ... 9.5 0.5 ... 5 ... 9.5 0 ... 3 ... 6 0 ... 3 ... 6 0 ... 3 ... 6
Sidelobe suppression for first 0.5 ... 5 ... 9.5 T 0.5 ... 5 ... 9.5 T 0 ... 3 ... 6 T 0 ... 3 ... 6 T 0 ... 3 ... 6 T sidelobe above main beam avg. 15 ... 16 ... 17 dB 15 ... 18 ... 19 dB 18 ... 17 ... 15 dB 18 ... 18 ... 16 dB 18 ... 18 ... 16 dB Impedance VSWR Isolation: Intrasystem Intermodulation IM3 Max. power per input Total power per combined input Integrated combiner 250 W* 450 W* The insertion loss is included in the given antenna gain values.
1710 2180 45 C 7-16 790 960 45
50 < 1.5 > 30 dB < 150 dBc 200 W*
790 960 +45/ 45 Polarization

125 65
790 960 +45 C
* (at 50 C ambient temperature)
1710 2180 +45
10
10 3
10
7-16
Mechanical specifications Input

dB
dB
2 x 7-16 female (long neck) Bottom 2 x, Position bottom continuously adjustable Frontal: Lateral: Rearside: 850 N (at 150 km/h) 380 N (at 150 km/h) 910 N (at 150 km/h) 200 km/h 1933 / 261 / 146 mm M (Medium) 20 kg / 22 kg (clamps incl.) 2256 x 282 x 182 mm Panel and 2 units of clamps for 50 115 mm diameter
Subject to alteration.
Connector position Adjustment mechanism Wind load
Horizontal Pattern
Vertical Pattern 0.59.5 electrical downtilt
1710 2180 +45/ 45 Polarization

Max. wind velocity
120 65 4.8
10 10
936.3860/d
Height/width/depth Category of mounting hardware Weight Packing size Scope of supply

dB
dB
Horizontal Pattern
Internet: www.kathrein.de
Vertical Pattern 0 6 electrical downtilt 742224V02 Page 1 of 2
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Accessories General Information

Accessories
Type No. 738546 731651 85010002 85010003 737978 Description 1 clamp 1 1 1 1 clamp clamp clamp downtilt kit Remarks Mast: 50 115 mm diameter Mast: 28 60 mm diameter Mast: 110 220 mm diameter Mast: 210 380 mm diameter Downtilt angle: 0 11 Weight approx. 1.0 kg 0.8 2.7 4.8 2.8 kg kg kg kg Units per antenna 2 (included in the scope of supply) 2 (order separately if required) 2 (order separately if required) 2 (order separately if required) 1 (order separately if required) 1933 Adjustment mechanism with integrated scale 167* 1967 2005 9 72 64
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Material: Reflector screen: Weather-proof aluminum. Fiberglass housing: It covers totally the internal antenna components. The special design reduces the sealing areas to a minimum and guarantees the best weather protection. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is light grey. All screws and nuts: Stainless steel or hot-dip galvanized steel. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded.
Grounding:
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: Low temperature: 55 C High temperature (dry): +60 C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathreins antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Layout of interface:
146*
60 167 261* Bottom view * Dimensions refer to radome

Subject to alteration. 936.3860/d
Please note:
As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheet issues have now become invalid.
Page 2 of 2 742224V02
46
108
Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973

D

Uploaded by

Copyright:

Available Formats

D

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

D

Uploaded by

Copyright:

Available Formats

Dual-band Panel Dual Polarization Half-power Beam Width Adjust. Electr.

Downtilt Integrated Combiner

790 960 X 65 010 C

Downtilt set by hand or by optional RCU (Remote Control Unit)

50 < 1.5 > 30 dB < 150 dBc 200 W*

790 960 +45/ 45 Polarization

790 960 +45 C

* (at 50 C ambient temperature)

1710 2180 +45

Mechanical specifications Input

Connector position Adjustment mechanism Wind load

Vertical Pattern 0.59.5 electrical downtilt

1710 2180 +45/ 45 Polarization

Height/width/depth Category of mounting hardware Weight Packing size Scope of supply

Vertical Pattern 0 6 electrical downtilt 742224V02 Page 1 of 2

Accessories General Information

60 167 261* Bottom view * Dimensions refer to radome

You might also like