Milton Valve
Milton Valve
Milton Valve
With more than 50 years of experience in the development and supply of pinch valves, Milton Roy Europe can offer a complete range of full bore valves suitable for many applications.
VALVES
Technical details
Operation
The valve is closed by applying pressure between the body (A) and the sleeve (B) via connection (C). Usually pressure is applied by air but the air can be replaced by water. When the pressure is applied the sleeve deforms to close the valve. Careful use of fibre reinforcement in the construction of the sleeve ensures that total shut off is achieved.
Materials of construction: Body - Cast Iron: - Aluminium: Connections Threaded - Stainless steel: Flanged* - Cast iron: - Stainless steel: DN 20 to DN 80 DN 100 to DN 300
Advantages
Full bore: - No pressure drop, - No risk of blockage. Total sealing with solid particles present, gas, powders and slurries, ... Sleeve life: - Three grades of rubber are available as standard (other materials on request), - Sleeves fibre reinforced. Leak free due to absence of glands. Protection of installation: - Water hammer avoided on opening and closing. Ease of installation: - Flanged connections (except DN 20: which is threaded).
DN 20 DN 40 to DN 300 DN 40 to DN 200
Sleeve* - Abrasion resistant natural rubber: DN 20 to DN 300 - Neoprene: DN 20 to DN 200 - Non toxic rubber: DN 20 to DN 200 Temperature range - Abrasion resistant natural rubber: -5 C to 80 C - Neoprene: -5 C to 80 C - Non toxic rubber: -5 C to 80 C * Other materials on request
Principle
The automatic pinch valve comprises valve body (A), a cylindrical sleeve made from natural or synthetic rubber (B) and two flanges (E).
Open
Closed
Dimensions
DN 20
(1)
DN 40
(2)
DN 50
(2)
DN 65
(2)
DN 80
(2)
DN 100
(2)
DN 125
(2)
DN 150
(2)(4)
DN 200
(2)(4)
DN 250
(2)(4)
DN 300
(2)(4)
A J C H L
Cast iron or 316 L SS flanges (mm) Cast iron or 316 L SS flanges (mm) (mm) (mm) Volume of control fluid (litres)
150 26 27.2 Rp3/8" 150 54.5 0.2 PN 10 DN 40 Optional 2" ANSI 150
276 36 37.2 Rp3/8" 220 110 3.5 PN 10 DN 100 4" ANSI 150
See Fig. 1 See Fig. 2 (3) Cast iron flange only (4) Valves in accordance with the European under pressure devices directive 97/23/CE
(1) (2)
Protection
The valves receive a 65 microns Ameron polyurethane paint colour yellow RAL 1018.
VALVES
Principle
The automatic pinch valve comprises, valve body (1), a cylindrical sleeve (2) made from natural or synthetic rubber, two connections (3) and 2 nuts (4). The sleeve is clamped at each end between the body and the connections and assembled using the nuts.
Dimensions Function
The valve is closed by applying pressure between the body and the sleeve. Usually pressure is applied by air but the air can be replaced by water. When the pressure is applied the sleeve deforms to close the valve. Careful use of fibre reinforcement in the construction of the sleeve ensures that total shut off is achieved.
L (mm) B (mm) H (mm) P (mm) Rp Net weight (kg) DN 20 144 60 69 32.5 3/4" 0.5 DN 25 144 74 79 37.5 1" 0.7 DN 32 170 83 89 43 1 1/4" 0.8 DN 40 200 103 99 48 1 1/2" 1
Advantages
Full bore: - No pressure drop - No risk of blockage Chemical resistance: - Suitable for use in corrosive atmospheres Lightness: - Cost of installation reduced (no support required) Ease of installation: - Threaded connections Total sealing: - Gas, liquids or powders.
Technical details
Sizes: DN 20, DN 25, DN 32 and DN 40 Materials of construction: - Body, connectors and nuts: PVC - Sleeve: abrasion resistant natural rubber, non toxic rubber or neoprene (others available on request) Connections: threaded gas (BSP) Service conditions: - Service pressure: 4 barg max. - Control fluid pressure: 6 barg max. - Differential pressure: around 2 barg subject to sleeve and application - Temperature range: -5C to 60C (for other temp., consult us)
A network of over 100 distributors and sales and service offices. To find your local representative, visit our website:
www.miltonroy-europe.com
VALVES - Ref.: 160 5702 101 N - 03/06 - Rev. B All rights reserved for modification without prior notice - SIREN 663 650 547 B - RC Evreux - Printed in France.