Field Strength Analyzer UBA 9290: Applications
Field Strength Analyzer UBA 9290: Applications
Field Strength Analyzer UBA 9290: Applications
Handheld and Battery operated TFT Color LCD Display 320 x 240 Measurement Range 100 kHz to 2.9 GHz, Span Range 1 MHz to 1 GHz High Sensitivity -117 dBm Built-in Frequency Counter: 9 MHz to 2.1 GHz Display modes: Spectrum Analyzer, Bar Graph (5/11/21/51/101/201 Channels, Single Bar, Difference) Sweep Mode (Free Run, Single Run, Squelch Run) Marker 1,2, Delta, Peak, Center Memory: 100 Waveforms / Settings
RF & Microwave AWT Globals new UBA 9290 is battery operated, hand-held RF Field Strength Meter with spectrum capability. It is ideal for measuring various RF signals and with a frequency range of 100 kHz to 2900 MHz, it is suitable for many applications in telecommunications, cable TV, RFID, WiFi, and general analysis, service and maintenance of RF systems. The low noise floor of -117 dBm allows to detect and analyze even weak signals. With its basic spectrum analyzer functionality, the UBA 9290 is well suited for many applications in the field, laboratory and even production. It provides engineers and technicians a cost-effective but powerful tool for RF signal analysis, and that at a fraction of the cost of a full-features conventional spectrum analyzer. With its user friendly interface, the UBA 9290 is very easy to use. It allows to conveniently setting the measurements, but offers also 100 presets such as predefined range or channel settings and other special functions that are commonly used in analog communication systems. The analyzer supports high-speed USB and includes software that controls the instrument from a PC. Measurement data can be stored on the computer for further analysis. The affordable handheld RF Field Strength Analyzer UBA 9290 is an ideal tool for field testing installing and maintaining mobile telecommunication systems such as cellular phones, Cable and Satellite TV Systems as well as performing antenna site measurements and maintenance. UBA 9290 The UBA 9290 is a compact, light-weight but cost effective field strength analyzer with spectrum capability. Furthermore, it offers frequency measurement capabilities. Even if the budget it tight, measurements need to be accurate and reliable. The UBA 9290 is ideal for quick signal analysis in the field and in the lab. With only 400g of weight it will be a permanent companion of RF engineers and technicians. Technology AWT-Global provides advanced telecommunication technology products and analyzers for a variety of RF and Microwave applications. For more information on any of our products or services please visit our Web site: www.awt-global.com
Applications
Measurement and analysis of RF signals. Installation and maintenance of RF and wireless equipment and cable TV installations. Signal coverage (drive tests, walk tests). RFID tag RF strength measurements. Satellite antennas installation and maintenance. Tapping, hidden camera detection. Jammer (military, hospital & theater) performance test.
Technical Specifications
Frequency
Range Accuracy Reception sensitivity Resolution Step range Span range 100 kHz to 2.9 GHz TXO: +/- 2.5 ppm 0-6 dBu EMF (S/N: 10 dB @ W-FM, 12 dB @ N-FM) 5 kHz ( multiples of 5 kHz) Multiples of 5 kHz & 6.25 kHz 1 MHz to 1 GHz
Frequency Counter
Frequency range Connector Resolution / Digits Accuracy Sampling time Input sensitivity Max input voltage 9 MHz to 2.1 GHz BNC -female, 50 Ohms 1 kHz, 7 digits 50 ppm, +/- 1 count 512 ms 150 mV (9 MHz - 2.1 GHz) 100 mV (20 MHz - 1.0 GHz) 5 Vrms
Product Quality
AWT is committed to providing our customers products that meet highest quality standards.
Amplitude
Units Range Resolution Accuracy Bandwidth Attenuator Spurious noise level Input impedance Connector Max input level dBm, dBmV, dBuV -32 to -117 dBm (N-FM) -22 to -107 dBm (W-FM, AM, SSB) 0.1 dB 2 dB (23C +/-3C) N-FM: 12.5 kHz, W-FM: 180 kHz, AM/SSB: 2.4 kHz 10, 20, 30 & 35 dB -45 dBc (N), -35 dBc(W) 50 Ohms / 75 Ohms N-Type female 10dBm, 5 Vrms
Computer Interface
USB cable included
Audio
Output 1W into 8 Ohm speaker
Power
Battery Adapter 6x AA-Type Ni-MH, 1.2V 2.700 mAh, rechargeable Output DC 9V AC 100 - 240V
Environment
Operating temperature 0C to 40C Relative humidity 35 to 85% non condensing -10C to 50C
Sweep
Speed Trigger source Trigger mode Marker mode 500 ms N-FM, W-FM, AM, SSB Free, single, continuous; squelch Off, 1&2, Delta, Peak, Center
Storage temperature
Physical Specifications
Dimensions Weight (w/o batteries) 0.395 kg ( 0.87 lbs) 82 x 205 x 36 mm 3.2 x 8.1 x 1.4 inches
Sales
AWT Global Headquarter 2001 Route 46, STE #310 Parsippany, New Jersey 07054, USA
Memory
Trace & setup storage 100 Waveforms and Settings
Sales Offices
Display
Type Color TFT 320 x 240
AWT-Global p: +1 (973) 321-3423 New Jersey 2001 f: +1 (9 Rt 73) 46402-8912 Waterview Plaza, STE e: sales@awt-global.com #310 / 71 Parsippany, New Jersey 07054, AWT Global USA
West Coast Office
Ordering
Type
UBA9290
f: +1 Las Vegas, (973) Nevada 402-8912 e: info@awt-global.com 89138, USA AWT-Global p: +1 (702) 358-0290 Nevada 11309 f: +1 (817) Asilo 288-0521 Bianco Avenue Las e: sales@awt-global.com Vegas, Nevada 89138, USA
Web site:
MPADBNC3G
Matching Pad 50 Ohm BNC male to 75 Ohm BNC female, 3 GHz (only sold with UBA9290)
f: +1 (817) 288-0521