Prime Model:P60P/B

Standby Model:P66E/B
DIESEL GENERATOR SET
190V-440V 3P4W
Rating Range
Standby:
Prime:
ISO 9001:2000
SWT DIESEL GENERATOR SET
RATINGS: All three-phase units are rated at 0.8 power factor. Standby ratings : Standby
ratings apply to installations served by a reliable utility source. The standby rating is for
this rating. Ratings are in according with ISO-3046/1,BS 5514 ,AS 2789 , and DIN 6271.
Prime Power Ratings: Prime power ratings apply to installations where utility power is
unavailable or unreliable. At varying load, the number of generator set operating hours
is unlimited. A 10% overload capacity is available for one hour in twelve. Ratings are in
accordance with IS0-8528/1, overload capacity in accordance with ISO-3046/1,BS 5514,
AS 2789, and DIN 6271. For limited running time and base load ratings, consult the
factory. The generator set manufacturer reserves the right to change the design or
specifications without notice and without any obligation or liability whatsoever.
GENERAL GUIDELINES FOR DERATION: Altitude: Derate 2.0% per 300m(984 ft.)
elevation above 1000m(3279 ft.) up to a maximum elevation of 2450m(8000 ft.).More than
2450m( 8000f t ) , pl ease cont act s wi t h us or our deal er seek t he hel p.
Temperature: Derate 6.0% per 11 (20 ) temperature above 40 (104 ).
1500RPM 50Hz
kW
kW
VA k
VA k
Standard Features and Characteristics
1
UCI224E(STAMFORD)
60.0 60.0 60.0 45.0
48.0 48.0 48.0 36.0
88.3 88.8 89.1 89.5
54.4 54.1 53.9 51.8
Cont.H -125/40
Voltage series star
Voltage parallel star
Voltage series delta
50Hz 1500rpm
Rating capacity(kVA)
Rating power(kW)
Power efficiency(%)
Input power(kW)
Alternator Model LSA43.2 M45(LEROY SOMER)
ALTERNATOR RATINGS
Cont.H -125/40
50Hz 1500rpm Frequency and Speed
Class-TEMP Rise( )
220 230 240 254
190 200 208 220
380 400 415 440
Prime Power Data
Standby Power Data
Standby.H -163/27
Voltage series star
Voltage parallel star
Voltage series delta
Rating capacity(kVA)
Rating power(kW)
Power efficiency(%)
Input power(kW)
Class-TEMP Rise( )
220 230 240 254
190 200 208 220
380 400 415 440
Standby.H -163/27
63.0 63.0 63.0 63.0
50.4 50.4 50.4 50.4
88.0 88.5 88.8 88.8
57.3 57.0 56.8 56.8
56.0 60.0 60.0 60.0
45.0 48.0 48.0 48.0
89.0 89.0 89.0 89.0
50.6 54.1 54.1 54.1
220 230 240 N/A
190 200 208 220
380 400 415 440
59.0 63.0 63.0 63.0
47.0 50.0 50.0 50.0
88.4 88.4 88.4 88.4
53.2 56.6 56.6 56.6
220 230 240 N/A
190 200 208 220
380 400 415 440
52.8
66
48
60
In line with our policy of continuous product development, we reserve the right to change
specification without notice
The picture only for reference
All equipment is guaranteed for the period of 1000 hours or 12
mouths from the date of commissioning or 18 months from
shipping, whichever occurs first.
Controllers are available for all applications. The controller
system is used to start and stop the engine , indicate
electric date and protect the generator set.See controller
features inside.
WARRANTY
The engine and alternator are close coupled by means of an
SAE flange . A full torsional analysis has been carried out to
guarantee no harmful vibration will occur
QUALITY STANDARDS
The SUPERWATT generator set compliance with all main
standards, such as ISO8528 GB/T2820-97), GB755
BS5000, VDE0530, ISO3046, IEC34-1, CSA22-2, AS1359,
ISO14001.
SUPERWATT Company provides one-source responsibility for
the generator set and accessories.
Other standards and certifications can be considered on request.
Diesel engine and alternator OEM authorization certificate
and their quality assurance.
ASSEMBLY
Anti-vibration pads are affixed between engine alternator feet
and the baseframe. Thus ensuring complete vibration isolation
of the rotating assemblies and enabling the machine to be
placed on an uneven surface without any detrimental effects.
For durability and corrosion resistance, all iron and steel
surfaces of canopy fabrications have been treated for coating
by grit blast cleaning. Then covered by a polyester powder
paint which provides an excellent corrosion resistant surface.
CONTROL SYSTEM AND PROTECTION
Each SUPERWATT generating set has been got through 2 hours
load test for running 0%,25%,50%,75%,100% and 110% load,
all protective devices and control function are stimulated and
checked before dispatch.
The revolving parts are covered by safety net , and the place
which easy to scald and got an electric shock all to have the
obvious warning slogan
Convenience for operation and maintenance, backed by
PERKINS ,NEWAGE(CUMMINS) and LEROY SOMER global
service network.
Standard voltage 230V/400V
1P/3P
ALTERNATOR
Specification
Engine Electrical System
Battery charging alternator:
Ground(negative/positive)
Volts(DC)
Ampere rating 65A
Starter motor rated voltage(DC)
Starter motor rated Capability
Battery voltage
Fuel System
Engine Electrical
Fuel
Type of injection
Fuel injection pump
Fuel injector
Nozzle opening pressure
Type





Insulation
Voltage regulator
Exciter type
Application Data
DIESEL ENGINE
Engine Specifications
Exhaust
Exhaust System
Fuel lift pump
Flow/hour
Pressure
Maximum suction head
Governor type
Fuel specification
Density (kg/l @ 15 ) 0.835 - 0.855
Viscosity (mm
2
/s @ 40 ) 2.0 - 4.5
Sulphur Content 0.1%-0.2%
Cetane Number 45 minimum
Lubrication system
Lubrication
Total system 8.3 litres (17.5 UK pints)
Minimum 6.2 litres (13.1UK pints)
Relief valve opens
Normal oil temperature 125 (257 )
Maximum back pressure
Exhaust outlet size
Manufacturer
Cylinder arrangement
Cycle
Induction system
Compression ratio
Bore
Cubic capacity 3.3 litres
Direction of rotation
Firing order
Estimated total weight(dry)
Exhaust gas flow (max) 10.4m
3
/min
Number of cylinders
Stroke
Frequency regulation steady state 0.75%
Frequency
Max. Power at rated rpm
Exhaust gas temperature (max) 571 (1060 )
Cleaner type all models Dry
Fuel consumption
Combustion air flow 3.91 m /min
3
29.0Mpa(4208lbf/in
2
)
Protection
Rated power factor
Stator winding
Winding pitch
Winding leads
Maximum overspeed
Sustained short circuit
Waveform distortion
Voltage regulation
Alternators meet the requirement of BS EN 60034 and the
relevant section of other international standards such as
BS5000, VDE 0530, NEMA MG1-32, IEC34, CSAC22.2-100,
As1359, and other standards and certifications can be
considered on request.
The 2/3 pitch design avoids excessive neutral currents. With the
2/3 pitch and carefully selected pole and tooth designs,
ensuresvery low waveform distortion.
Brushless alternator with brushless pilot exciter for excellent
load response.
Altitude
4-Pole, Rotating Field
Brushless, Self excited
Solid State, Volts/Hz
1103A-33TG2 diesel engines are manufactured by Perkins
Engines Company Limited(UK).
1.5%
Class H
IP23
0.8
Double layer concentric
Two thirds
12
2250 Rev/min
Self excited machines do not
sustain a short circuit current
Non-distorting balanced linear load < 5.0%
No load < 1.5%
1000 m
60.5kWm
1, 2, 3
Clockwise viewed from front
127 mm (4.99 in)
105 mm (4.13 in)
Turbocharged
Four stroke
Vertical in-line
3
PERKINS(UK)
Electronic governor (optional)
415-470kPa(60.2-68.2lbf/in
2
)
Fixed
The insulation system is class H, easy paralleling with mains or
other generators, standard 2/3 pitch stator windings avoid
excessive neutral currents.
Backed by worldwide service network
Multi-hole
Rotary type
Direct
12V
3KW
12V
12V
Negative
120-150litres/hr(31.6-39.5 gals/hr)
30-75kPa(4.35-10.875 lbf/in
2
)
17.25:1
10 kPa (3.0 in Hg)
Minimum cranking speed 105 rev/min
17kPa(2.465lbf/in
2
)
Fuel lift pump type Mechanical
420kg
56mm(2.2in)
1500RPM 50Hz
1500RPM 50Hz
1500RPM 50Hz
1500RPM 50Hz
1500RPM 50Hz
1500RPM 50Hz
1500RPM 50Hz
1500RPM 50Hz
2
Litres/hr(UK gals/hr)
15.4(3.3) 4.1(0.9)
Power rating %
110 100 75 50
13.9 (3.0) 10.4 (2.2) 7.2(1.5)
25
Application Data
Cooling System
Pressure cap setting
Cooling system
Total system capacity


Drain down capacity
Maximum top tank temperature
Minimum temperature to engine
Temperature rise across engine
Max permissible external
system resistance
Thermostat operation range
Recommended coolant:
50% ethylene glycol with a corrosion inhibitor
(BS 6580 :1992 or ASTM D3306-89 or AS2108)
and 50% clean fresh water.
TBA kPa ( lbf/ ) in
2
107 kPa (15.52 lb/in
2
)
82 - 93 (180 - 199 )
TBA ( )
TBA ( )
110 (230 )
TBA litres ( UK pints)
4.4 litres (9.2 UK pints)
10.2 litres (21.5 UK pints) with radiator
without radiator
1500RPM 50Hz
NOTE:
All data is based on:
1. Engine operating with fuel system, water pump, lubricating oil pump, air cleaner and
exhaust silencer; not included are battery charging alternator, fan, and optional driven
components.
2. Engine operating with fuel corresponding to grade No. 2-D per ASTM D975.
3. ISO 3046, Part 1, Standard Reference Conditionsof:
Barometric Pressure : 100 kPa (29.53 in Hg)
Air Temperature : 25 (77 )
Altitude : 110 m (361 ft)
Relative Humidity : 30%
Air Intake Restriction: 254 mm H2O(10 in H2O)
Exhaust Restriction : 51 mm Hg (2 in Hg)
TBA: To Be Determined
3
The Model 702 is a Manual Engine Control Module designed to
control the engine via a key switch and pushbuttons on the front panel.
The module is used to start and stop the engine and indicate fault
conditions, automatically shutting down the engine and indicating the
engine failure by LED, giving true, first up fault annunciation.
Protection:
Low Oil Pressure
High Engine Temperature
Auxiliary Shutdown
Over speed
The DSE704 is an Automatic Mains Failure module with generator
monitoring, protection and start facilities. It utilises advanced surface
mount construction techniques to provide a compact yet highly
specified module. This model can start the unit automatically when
the MAINS failure and than control the ATS turn to the genset side.
Operation of the module is via three pushbuttons mounted on the
front panel with STOP, MANUAL and AUTO positions.
DC Supply: 8 to 35 V Continuous.
Protection:
Over Speed Shutdown.
Optional Under speed Protection.
Low Oil Pressure Shutdown.
High Engine Temp Shutdown.
Charger failure alarm.
Mains failure alarm.
DC Supply: 8 to 35 V Continuous.
CONTROLLERS
DSE 702 MANUAL CONTROLLER(Standard)
The voltage change-over switch and the rheotrope uses for to
choose the different phase voltage and current to display.

Panel introduction:
Indicator type frequency, voltmeter and ampere meter
demonstration unit's electrical parameter.

The controller.

DSE 704 AMF CONTROLLER(Optional)
Panel introduction:
Indicator or digital type frequency, voltmeter and ampere meter
demonstration unit's electrical parameter.

Preheating button.
The oil pressure gauge, coolant temperature gauge and the
battery voltage gauge.

PCRC210/220 INTELLIGENT CONTROL SYSTEM
The controller.
The AMF25 is an Automatic Mains Failure module with generator
monitoring, protection and start facilities.
generator's

The controller has a large
LCD screen, display the each parameter, running and
alarm information. The off/replacement button, mode switch button ,
start/stop button and the LED indicator light, makes the user easy to
operate and maintain the generator.
The big red button uses for the operator to stop the genset
peremptorily

Function:
Communication: RS232 connection, uses the industry rank
MODBUS protocol can easily communicate with others
intelligence control system.
The voltage change-over switch and the rheotrope uses for to
choose the different phase voltage and current to display.

Panel introduction:
Indicator type frequency, voltmeter and ampere meter
demonstration unit's electrical parameter.

The big red button uses for the operator to stop the genset
peremptorily

The controller.


And an integral anti-tamper LCD hours run
counter is also provided.
If the customer needs to use the preheating function, we will be
able to increase the preheating button.
The oil pressure gauge, coolant temperature gauge and the
battery voltage gauge.

Display function: LCD screen can display the generator's
parameter and the control system's running information.
Set up parameter: Engineer can set up the controller parameter
from the control panel or through the PC, 6 programmable
fan-out may satisfy the user each kind of demand.
Protection: The control system can protect the generator set ,
manage each kind of electrical failure.
DC Supply: 8 to 35 V Continuous.
Control Function of ATS.
NOTE: More functions or please refer to website www.genset.cn. Extra demand
please contacts our sales engineer.
Control panel for openstyle
Control panel for soundproof
Control panel for soundproof
(Optional)
The controller made in UK
The controller made in UK
The controller made in Czech
Comap genset controller
DEEPSEA genset controller
DEEPSEA genset controller
DISTRIBUTED BY:
w
H
L
Dimensions and Weights
Open Style
Overall Size, L W H mm 2030 730 1565
Weight(radiator model),net,Kg 890
Soundproof Style
Overall Size, L W H mm 2330 1110 1830
Weight(radiator model),net,Kg 1426
NOTE: This drawing is provided for reference only and should not be used for planning
installation. Contact your local distributor for more detailed information.
4
Standard Features and Optional Accessories
Standard Features
Battery, Battery Rack and Battery Cables
Integral Vibration Isolation
Oil Drain Extension
Optional Accessories
Block Heater
(recommended for ambient temperatures below 0 )
Cooling System
Enclosed Unit
Sound Enclosure
Weather Enclosure (with enclosed critical silencer)
Weather Housing (with roof-mounted critical silencer)
Radiator Duct Flange
Remote Radiator Cooling
Fuel System
Auxiliary Fuel Pump
Flexible Fuel Lines
Subbase Fuel Tank with Day Tank
Fuel fill cap with breather
10 hours running tank
Mechanical dipstick or fuel level sensor
Electrical System
Battery Charger, Equalize/Float Type
Engine and Alternator
Air cleaner ,Heavy Duty
Heavy duty industrial type exhaust silencer
with flexible pipe(supplied loose).
Oil Preheater
Alternator Strip Heater
3 Pole Circuit Breaker
3 Pole ABB Circuit Breaker
Fuel/Water Separator
Air Preheater
Parallelling System
Reactive Droop Compensator
Voltage Adjust Control
Voltage Regulator Relocation Kit
Maintenance Kit (includes air, oil, and fuel filters)
Controller System
Common Failure Relay Kit
Customer Connection Kit(Except Open Style)
Communications Products and PC Software
Engine Pre-alarm Sender Kit
Remote Annunciator Panel
Remote Audiovisual Alarm Panel
Remote Emergency Stop Kit
Miscellaneous Accessories and Functions
Open Unit
Exhaust Silencer, Critical kit
Flexible Exhaust Connector, Stainless Steel
Automatic fuel--providing device
PCRC series control system, with RS232 or RS485
communication connection and communication agreement.
Maintenance and Literature
General Maintenance Literature Kit
Overhaul Literature Kit
Test Certificate and design paper
Quality certificate and Maintenance card
Hand primer pump
Trailer(Causes the genset easily to move)
Maintenance and Literature
NOTE: Optional accessories can beoffered according tocustomer's requirements.
You could sign" " in the before blank if you need this choice, and you should
charge for it certainly!
NOTE: Additional accessories and functions can be written here!