Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 118 views

    Gep26sp3 RPL

    Uploaded by

    Jorge Gustavo Goyechea
    The document provides a list of parts that should be considered for stocking by dealers for a GEP26SP3 engine model with an 1103A-33G1 engine and LLB1014S alternator. It includes parts for regular maintenance at 500, 1000, and 5000 hour intervals as well as for minor and major overhauls. Additional optional parts for the cooling system, canopy, and control panel are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gep26sp3 RPL

    Uploaded by

    Jorge Gustavo Goyechea
    118 views2 pages
    The document provides a list of parts that should be considered for stocking by dealers for a GEP26SP3 engine model with an 1103A-33G1 engine and LLB1014S alternator. It includes parts for regular maintenance at 500, 1000, and 5000 hour intervals as well as for minor and major overhauls. Additional optional parts for the cooling system, canopy, and control panel are also listed.

    Original Title

    Gep26sp3 Rpl

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a list of parts that should be considered for stocking by dealers for a GEP26SP3 engine model with an 1103A-33G1 engine and LLB1014S alternator. It includes parts for regular maintenance at 500, 1000, and 5000 hour intervals as well as for minor and major overhauls. Additional optional parts for the cooling system, canopy, and control panel are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    118 views2 pages

    Gep26sp3 RPL

    Uploaded by

    Jorge Gustavo Goyechea
    The document provides a list of parts that should be considered for stocking by dealers for a GEP26SP3 engine model with an 1103A-33G1 engine and LLB1014S alternator. It includes parts for regular maintenance at 500, 1000, and 5000 hour intervals as well as for minor and major overhauls. Additional optional parts for the cooling system, canopy, and control panel are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    GEP26SP3

    Engine Model
    Alternator Model
    Engine Build

    1103A-33G1
    LLB1014S
    DJ51323

    The following parts should be considered for dealer stocking in line with territory population and
    generating set application conditions

    Part Number

    Description

    Qty Per
    Generating
    Set

    500

    1000

    5000

    hrs

    hrs

    hrs

    Minor
    Overhaul

    Major
    Overhaul

    Regular Service Items (Change every 500hrs or 1 year)


    901-046

    AIR FILTER ELEMENT

    10

    10000-00339

    FUEL FILTER ELEMENT

    10

    10000-06412

    PRE-FUEL FILTER ELEMENT

    10

    901-102

    OIL FILTER ELEMENT

    10

    Regular Service Items (Change every 1000hrs or 2 years)


    10000-00105

    ROCKER COVER GASKET

    981-209

    FANBELT

    10000-00051

    ATOMISER

    916-160

    INLET VALVE STEM SEAL

    10000-00118

    EXHAUST VALVE STEM SEAL

    10000-00071

    CYLINDER HEAD GASKET

    998-702

    EXHAUST VALVE

    998-701

    INLET VALVE

    998-698

    THERMOSTAT KIT

    10000-00116

    TOP GASKET KIT

    994-275

    VALVE GUIDE

    998-704

    VALVE SPRING

    622-333

    LOW OIL PRESSURE SENDER

    622-817

    HIGH WATER TEMP SENDER

    998-706

    CYLINDER HEAD BOLT

    998-707

    CYLINDER HEAD BOLT

    982-308

    COTTER

    998-699

    HEATER PLUG

    Engine Top End

    Engine Lower End


    10000-02835

    SET OF PISTONS & RINGS

    10000-10855

    SET OF BIG END BEARINGS

    936-080

    SET OF MAIN BEARINGS

    904-015

    SET OF THRUST WASHERS

    904-016

    SET OF THRUST WASHERS

    10000-00058

    BOTTOM END GASKET KIT

    998-712

    REAR OIL SEAL

    902-001

    FRONT OIL SEAL

    10000-00119

    WATER PUMP REPAIR KIT

    915-732

    SMALL END BUSH

    915-747

    CONROD BOLT

    10000-07538

    FUEL PUMP

    10000-16477

    STARTER MOTOR

    915-730

    CHARGING ALTERNATOR

    10000-00100

    OIL PUMP

    The above parts are correct at the time of printing for the engine serial number prefix (build number) stated above.
    All part numbers should be checked on Compass for the serial number of your generating set.
    Please consult the operator's manual for full details on Generating Set maintenance.
    In line with our policy of continuous product development, we reserve the right to change specification.

    GEP26SP3
    Engine Model
    Alternator Model
    Engine Build

    1103A-33G1
    LLB1014S
    DJ51323

    The below parts are not required as part of standard Scheduled maintenance. However, they
    should be considered for dealer stocking incase of emergency
    Part Number

    Description

    Generating

    Cooling System
    342-256

    TOP HOSE

    342-257

    BOTTOM HOSE

    1
    1

    10000-00432

    RADIATOR CAP

    10000-25574

    CORNER POST

    10000-45034

    DOOR HINGE - LHS

    10000-45033

    DOOR HINGE - RHS

    10000-45255

    DOOR LATCH

    531-208

    DOOR KEY

    10000-45256

    ROOF HATCH

    10000-45031

    PANEL DOOR WINDOW

    10000-47173

    POWERWIZARD 1.1 MODULE

    10000-47171

    POWERWIZARD 1.1+ MODULE

    10000-47168

    POWERWIZARD 2.1 MODULE

    917-992

    EMERGENCY STOP

    Canopy

    Control Panel

    Alternator
    922-192

    EMERGENCY KIT (SHUNT)

    10000-12943

    AVR R 250

    954-022

    DIODE BRIDGE ASSEMBLY

    922-221

    SURGE SUPPRESSOR

    The above parts are correct at the time of printing for the engine serial number prefix (build number) stated above.
    All part numbers should be checked on Compass for the serial number of your generating set.
    Please consult the operator's manual for full details on Generating Set maintenance.
    In line with our policy of continuous product development, we reserve the right to change specification.

    You might also like