Cleo Brochure 2015

CLEO
VERSATILITY IN VITAL SIGNS
CLEO
PORTABLE
weighs less than 3 lbs
TOUCHSCREEN
easy and intuitive to use
MOBILE
backup battery powered
The Cleo is a new and intuitive approach to patient vital signs

measurement. The Cleo can be configured to measure any
combination of: non-invasive blood pressure, SpO2, rapid
temperature, and capnography (EtCO2).
Weighing in at less than 3 LBS the portable Cleo is well suited
for any patient care area by offering a multitude of vital sign
combinations. The Cleo can be used as a basic pulse oximeter or
configured to a NIPB/SpO2/Temp spot check monitor. Cleo can
also be configured to be a stand-alone capnograph or combination
capnograph/SpO2/NIPB monitor. The Cleo is well suited for both
bed side and mobile spot check use.
The Cleo simplifies clinician use by incorporating a touch screen

with a simple user interface making the Cleo intuitive for any
user. A long life lithium Ion battery is standard and many mobile
mounting solutions are available for the Cleo.
Field Upgradeable
THERMOMETER
Covidien Filac 3000

Accurate within >/- 0.3C a
Temperature Reading within 4 seconds
The Covidien Filac 3000 plug-in thermometer

module can be installed into the Cleo anywhere and
anytime. This simple plug-in module adds the option
of a 4 second oral temperature reading brightly
displayed on-screen. The Filac 3000 supports
infection control by utilizing single use probe covers
and a probe isolation chamber when not in use.
Cost Effective Capnography

Capnotrack
Infinium Capnotrack
The Infinium Capnotrack capnography system is a cutting
edge low flow End-tidal CO2 measuring system.
The
Capnotrack uses a 50/ml per minute sidestream method to
deliver the most accurate EtCO2 readings. Non-proprietary

sample lines allows the Cleo to be the industrys lowest cost
per patient End-Tidal CO2 monitors. The Capnotrack can
be used on both intubated and non-intubated patients. The
Capnotrack sample line connection system uses filter cells to
eliminate the potential of cross contamination.
Mounting Solutions
A RELIABLE CONNECTION
ROLLING STAND
Height and tilt adjustable with a large wheel base
allows for smooth and stable mobility.
n
n
n
n
Quick release slide mount

Accessory basket
Medical grade steel construction
Lockable wheels
WALL MOUNTS
Height and tilt adjustable wall mounts offer.
n
n
n
n
Quick release of monitor

Medical grade construction
Adaptable to anesthesia machines
Adaptable to most wall rail systems
CLEO TECHNICAL Specifications:

SAFETY
Meet the requirement of EN60601 series, CE marking according to MDD93/42/EEC

Type of Protection:

Degree of Protection:
Sterilization or Disinfection methods:

Operation Mode:
Protection Against Ingress of Liquids:
Class I (on AC power) , internally powered equipment (on battery power):Per I.E.C. 60601-1, clause 2.2.4
Type BF, defibrillation-proof CF - Applied part
70% isopropyl alcohol solution or a nonstaining disinfectant.
Equipment not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxide
Continuous
IPXO
APPLICATION
RAPID TEMPERATURE (OPTION)
NETWORKING
Neonatal, pediatric and adult patients
Temperature
Measurement Range:

Typical

Measurement Times:

(after insertion
into measurement site):

Wired Networking:

Wireless Networking:

PHYSICAL DIMENSIONS & WEIGHT

Base Unit: 8 x 4.5 x 4 (HxWxD inches)

Weight: 2.5 LBS
PERFORMANCE SPECIFICATIONS

Display:

Resolution:

Trace:

Waveforms:

Indicator:

Trend time:
5.0 inch (Diagonal) color TFT

800 3(RGB) 480
2 waveforms
PLETH, ETCO2
Alarm Indicator
Power indicator
Pulse beep and alarm sound
From 1 to 72 hours
NIBP
Measuring Technology: Automatic oscillating measurement

Cuff Inflating: <30s (0 ~ 300 mmH, standard
adult cuff)

Measuring Period: AVE<40s

Mode: Manual, Auto, STAT

Measuring Interval

in AUTO Mode: 2 min ~ 4 hrs

Pulse Rate Range: 30 bpm ~ 250 bpm

Measuring Range: Adult/Pediatric Mode
SYS: 40 ~ 250 (mmHg)
DIA: 15 ~ 200 (mmHg)
Neonatal Mode
SYS: 40 ~ 135 (mmHg)
DIA: 15 ~ 100 (mmHg)

Resolution: 1mmHg

Pressure Accuracy: Maximum Mean error: 5mmHg

Maximum Standard

deviation: 8mmHg
Overpressure Protection: Adult Mode: 280(mmHg)
Neonatal Mode: 150 (mmHg)

Alarm Limit: SYS: 50 ~ 240 mmHg
DIA: 15 ~ 180 mmHg

Standards: Meets performance standards of
ANSI/AAMI SP10:2002
SPO2

ASpO2:

SpO2% Range:

SpO2 Accuracy:

Pulse Rate Range:

Pulse Rate Accuracy:

Alarm Upper-lower Limit:

SpO2 Probe:
Anti-motion SpO2
0 ~ 100%
2% (70 ~ 100%,non-motion)
3% (70 ~ 100%, motion)
30-250 bpm
2 bpm(non-motion),
3 bpm (motion)
Upper limit 70 ~ 100%,
Lower limit 70 ~ 100%
Red light LED wavelength:
660nm5nm
Infrared light LED wavelength:
940nm10nm

Standards: Meets performance standards
of EN ISO 9919:2005
Pulse Timer:
Patient Accuracy:

Batteries:

Standards:

30C to 43C (86F to 109F)

Oral (Quick Mode):
3-5 seconds (non-fever temps),
8-10 seconds (fever temps)
Oral (Standard Mode): 6-10 seconds
Axillary Mode: 8-12 seconds
Rectal Mode: 10-14 seconds
Direct Mode (All Sites): 60-120
seconds
60 Second count with a beep at 15
seconds, 2 beeps at 30 seconds,
1 beep at 45 seconds, and 2
beepsat 60 seconds
A Standard Prediction Mode reading
and a Direct Mode reading will differ
by less than 0.2C (0.4F) on 98%
of tested patients
Four AA Required.
Standard IEC package size.
Alkaline --1.5 Volt
Approx. 6000 temperature readings
Meets performance standards of
EN 12470-3:2000,
ASTM E1112:2006
EtCO2 (OPTION)

Mode of Sampling: Sidestream or Mainstream

Principle of Operation: Non-dispersive infrared (NDIR) single
beam optics, dual wavelength, no
moving parts.
CO2 measurement Range: 0 to 150 mmHg
(0 to 19.7%, 0 to 20 kPa)
CO2 Calculation Method: BTPS
(Body Temperature Pressure Saturated)

CO2 Resolution: 0.1mmHg (0-69mmHg),
0.25mmHg (70-150mmHg)

CO2 Accuracy: 0 ~ 40 mmHg 2 mmHg
41 ~ 70 mmHg 5% of reading
Above 80 breath per minute 12%
of reading

Sampling rate: 100Hz

Respiration Rate: 2 ~ 150 bpm
Respiration Rate accuracy: 1 breath

Response Time: <3 seconds includes transport time and rise time

Inspired CO2
measurement Range: 3 ~ 50 mmHg

Standards: Meets performance standards of ISO/
FDIS 21647:2004 (E), ASTM F1456-01,
IEC/CDV 60601-2-55
Industry standard:
802.11b/g wired network
Frequency Range:
2.412 ~ 2.484 GHz
Connected bedside number:
Up to 16 bedside monitors
Up to 100m indoors
Industry standard 802.11b/g wireless
Supports TCP/IP and UDP/IP Protocols
POWER

Source: External AC power or internal battery

AC Power: 100 ~ 240VAC, 50/60Hz, 150VA
Battery: Built-in and lithium Ion rechargeable,
12.6V/5Ah
Charge Time: 8 hours
Operating Time: 3 hours
ENVIRONMENTAL SPECIFICATIONS

Temperature: Operating: 5 ~ 40 C
Storage: -10 ~ 45 C

Humidity Range: Operating: 80 %
Storage: 80 %
FUSE
3.15A/250V
LCD SPECIFICATIONS

Display Type:
Size (diagonal):
Active Area:
Color arrangement:
Dot pitch:
Display Mode:
Interface:
Surface Treatment:
TFT color LCD

5.0 inch
152.4 (W) 91.44 (H) mm
RGB-stripe
0.0635(W) 0.1905(H) mm
Normally white, Transmissive
Digital (TTL)
Anti-Glare
TOUCHSCREEN SPECIFICATIONS

Type: Four-Wire Analog Resistive Touch Panel

Input Mode: Stylus Pen or Finger

Connector: FPC
Insulation resistance: 25M

Voltage: 7VDC

Chattering: 10ms

Transparency: 80%

Surface hardness: 3H
Durability-surface scratching: Write 100,000

Active force: 80gf

Knock Test: 1,000,000 times
12151 62nd St N #5 Largo FL 33773 USA

Phone: (1) 727-531-8434 Fax: (1) 727-531-8436
Web: www.infiniummedical.com Email: sales@infiniummedical.com
ISO 13485

Cleo Brochure 2015

Uploaded by

Copyright:

Available Formats

Cleo Brochure 2015

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cleo Brochure 2015

Uploaded by

Copyright:

Available Formats

CLEO

VERSATILITY IN VITAL SIGNS

The Cleo is a new and intuitive approach to patient vital signs

The Cleo simplifies clinician use by incorporating a touch screen

Covidien Filac 3000

The Covidien Filac 3000 plug-in thermometer

Cost Effective Capnography

deliver the most accurate EtCO2 readings. Non-proprietary

Quick release slide mount

Quick release of monitor

CLEO TECHNICAL Specifications:

RAPID TEMPERATURE (OPTION)

Neonatal, pediatric and adult patients

PHYSICAL DIMENSIONS & WEIGHT

Base Unit: 8 x 4.5 x 4 (HxWxD inches)

5.0 inch (Diagonal) color TFT

30C to 43C (86F to 109F)

Mode of Sampling: Sidestream or Mainstream

Source: External AC power or internal battery

TFT color LCD

12151 62nd St N #5 Largo FL 33773 USA

You might also like