Barfield User Manual - 1811H-1811G-101-00165 168 169

1811G/H PITOT-STATIC TEST SET
USER INSTRUCTION MANUAL

M/N: 1811G/H, P/Ns: 101-00165
101-00168
101-00169
Doc. P/N: 56-101-00165 / 168 / 169
Revision A
September 9, 2009
__________________________________
BARFIELD, INC.
Corporate Headquarters
4101 Northwest 29th Street
Miami, Florida 33142
www.barfieldinc.com
Email: gsesales@barfieldinc.com
THIS PAGE INTENTIONALLY LEFT BLANK
1811G / H INSTRUCTION MANUAL
CONTACT INFORMATION
Users are requested to notify the manufacturer of any discrepancy, omission, or error found in
this manual. Inquiries should include specific questions and reference the publication title,
number, chapter, page, figure, paragraph, and effective date.
Please send comments to:
TECHNICAL CUSTOMER SUPPORT - GSTE
BARFIELD, INC.
P.O. BOX 025367
MIAMI, FL 33102-5367
USA
Telephone
(305) 894-5400
(800) 321-1039
Fax
(305) 894-5401
Email
gsesales@barfieldinc.com
56-101-00165 / 168 / 169 Rev. A
Page iv
ATTENTION
Although every effort has been made to provide the end user of this equipment with the most
current and accurate information, it may be necessary to revise this manual in the future. Please
be sure to complete and return the enclosed OWNER WARRANTY REGISTRATION CARD to
Barfield in order to validate the warranty and to ensure that you will receive updated information
when published. You MUST have your name and address on file at Barfield as a registered
user of this equipment, to be able to obtain the service covered by the warranty.
Visit the company website, http://barfieldinc.com/, for publication updates.
Please send the Registration Card to:
Barfield, Inc.
P.O. Box 025367
Miami, FL 33102-5367
USA
56-101-00165 / 168 / 169 Rev. A
Page vi
REVISION RECORD
REV.
ECO #
260-00729
REV. DATE
DESCRIPTION OF CHANGE
September 9, 2009
Initial Release, prepared from Technical Manual

57-101-00165 / 00168 / 00169 (TM1811G/H-8111,
revised on March 12, 1991), to update company
logo, contact information and format.
56-101-00165 / 168 / 169 Rev. A
Page viii
MAINTENANCE AND REPAIR INFORMATION

The manufacturer of this equipment does not recommend the user to attempt any maintenance
or repair. In case of malfunction, contact the manufacturer, to obtain the list of approved repair
facilities worldwide, ensuring that this equipment will be serviced using proper procedures and
certified instruments. A Return Maintenance Authorization (RMA) number will be assigned
during this call, to keep track of the shipment and the service.
BARFIELD PRODUCT SUPPORT
DIVISION
Telephone
(305) 894-5400
(800) 321-1039
Fax
(305) 894-5401
Shipping Address:
Barfield, Inc.
4101 NW 29th Street
Miami, Florida 33142
USA
Mailing Address:
Barfield, Inc.
P.O. Box 025367
Miami, FL 33102-5367
USA
56-101-00165 / 168 / 169 Rev. A
Page x
TABLE OF CONTENTS
Contact Information
Attention Page
Revision Record Page
Maintenance and Repair Information
Table of Contents
Page
INTRODUCTION
1.
2.
3.
PUBLICATION BREAKDOWN ...........................................................................1

INFORMATION PROVIDED WITH THE UNIT ..................................................1
RECERTIFICATION............................................................................................2
CHAPTER 1: DESCRIPTION
1.
2.
3.
4.
PURPOSE OF MANUAL.....................................................................................3
GENERAL DESCRIPTION .................................................................................4
SPECIFICATIONS ..............................................................................................5
PHYSICAL DESCRIPTION.................................................................................7
CHAPTER 2: OPERATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
GENERAL .................................................................................................. 11
PRESSURE / VACUUM SOURCE OPERATION ........................................ 14
PREPARATION FOR TEST ....................................................................... 16
TESTER LEAK CHECKS ........................................................................... 17
STATIC SYSTEM LEAKS .......................................................................... 19
PITOT SYSTEM TESTS............................................................................. 21
COMBINED PITOT / STATIC SYSTEM TESTS.......................................... 23
MACHMETER TEST .................................................................................. 25
ENGINE PRESSURE RATIO (EPR) TEST ................................................ 26
MANIFOLD PRESSURE GAUGE TEST .................................................... 27
PRESSURE TESTS ................................................................................... 29
VACUUM TESTS ....................................................................................... 30
SHUTDOWN PROCEDURES .................................................................... 32
CHAPTER 3: SHIPPING
1.
2.
RECEIVING................................................................................................ 33
SHIPPING .................................................................................................. 33
56-101-00165 / 168 / 169 Rev. A
Page xii
TABLE OF CONTENTS (continuation)

Page
CHAPTER 4: STORAGE
1.
PROCEDURE............................................................................................. 35
CHAPTER 5: SERVICING
1.
2.
PERIODIC INSPECTION ........................................................................... 37

INSTRUMENT RECERTIFICATION........................................................... 38
APPENDIX: ENGINEERING SPECIFICATIONS ............................................... 39

SECTION 1.
SECTION 2.
SECTION 3.
ALTIMETER........................................................................... 41
AIRSPEED INDICATOR ........................................................ 49
VERTICAL SPEED INDICATOR ........................................... 57
56-101-00165 / 168 / 169 Rev. A
Page xiii
INTRODUCTION
1. PUBLICATION BREAKDOWN
This instruction manual establishes the operation standards for the 1811G / H Pitot-Static
Test Set.
Its purpose is to provide sufficient information for the personnel unfamiliar with this unit to
understand this equipment, identify its parts, and operate it in accordance with proper
procedures, operating techniques, precautions and limitations.
2. INFORMATION PROVIDED WITH THE UNIT

Besides this User Instruction Manual, the 1811HA / GA Test Set is provided with the four
items described below.
A. An identification label, located on the front bulkhead of the Test Set, provides the
following information:
Manufacturer Name
Designation of Equipment
Equipment Part Number
Equipment Model Number
Equipment Serial Number
Equipment Modification (if applicable)
Equipment Options (if applicable)
B. The Owner's Warranty Registration card, (Figure 1), which is to be completed by the
owner and returned to the Barfield within ten (10) days of purchase to insure validation
of the warranty.
Figure 1 OWNER WARRANTY REGISTRATION CARD

56-101-00165 / 168 / 169 Rev. A
Page 1 of 63

C. The Limited Warranty Statement Card, (Figure 2), which lists the manufacturer's
obligation to the original purchaser.
Figure 2 LIMITED WARRANTY STATEMENT CARD

D. Each new or re-certified unit is delivered with a Certificate that shows the date when the
unit was tested by the manufacturer, its serial number, and when the next certification is
due.
This certificate confirms that the unit performed according to its design
specifications.
3. RECERTIFICATION
The Test Sets P/Ns 101-00165, 101-00168, and 101-00169 have a 6-month recertification
period when analog instruments are installed.
It is strongly recommended that the manufacturer, Barfield Inc., service the Test Set. This
will ensure that all applicable engineering change orders are incorporated during the
required maintenance or recertification procedure.
Note: It is important that the customer ensures the Test Set is in compliance with the
Recertification requirement.
56-101-00165 / 168 / 169 Rev. A
Page 2 of 63
1811G/H INSTRUCTION MANUAL
56-101-00165 / 168 / 169 Rev. A
Page 3 of 63
56-101-00165 / 168 / 169 Rev. A
Page 4 of 63
56-101-00165 / 168 / 169 Rev. A
Page 5 of 63
56-101-00165 / 168 / 169 Rev. A
Page 6 of 63
56-101-00165 / 168 / 169 Rev. A
Page 7 of 63
56-101-00165 / 168 / 169 Rev. A
Page 8 of 63
56-101-00165 / 168 / 169 Rev. A
Page 9 of 63
56-101-00165 / 168 / 169 Rev. A
Page 11 of 63
56-101-00165 / 168 / 169 Rev. A
Page 12 of 63
56-101-00165 / 168 / 169 Rev. A
Page 13 of 63
56-101-00165 / 168 / 169 Rev. A
Page 14 of 63
56-101-00165 / 168 / 169 Rev. A
Page 15 of 63
56-101-00165 / 168 / 169 Rev. A
Page 16 of 63
56-101-00165 / 168 / 169 Rev. A
Page 17 of 63
56-101-00165 / 168 / 169 Rev. A
Page 18 of 63
56-101-00165 / 168 / 169 Rev. A
Page 19 of 63
56-101-00165 / 168 / 169 Rev. A
Page 20 of 63
56-101-00165 / 168 / 169 Rev. A
Page 21 of 63
56-101-00165 / 168 / 169 Rev. A
Page 22 of 63
56-101-00165 / 168 / 169 Rev. A
Page 23 of 63
56-101-00165 / 168 / 169 Rev. A
Page 24 of 63
56-101-00165 / 168 / 169 Rev. A
Page 25 of 63
56-101-00165 / 168 / 169 Rev. A
Page 26 of 63
56-101-00165 / 168 / 169 Rev. A
Page 27 of 63
56-101-00165 / 168 / 169 Rev. A
Page 28 of 63
56-101-00165 / 168 / 169 Rev. A
Page 29 of 63
56-101-00165 / 168 / 169 Rev. A
Page 30 of 63
56-101-00165 / 168 / 169 Rev. A
Page 31 of 63
56-101-00165 / 168 / 169 Rev. A
Page 32 of 63
56-101-00165 / 168 / 169 Rev. A
Page 33 of 63
56-101-00165 / 168 / 169 Rev. A
Page 35 of 63
56-101-00165 / 168 / 169 Rev. A
Page 37 of 63
56-101-00165 / 168 / 169 Rev. A
Page 38 of 63
1811D INSTRUCTION
MANUAL
1811G/H
INSTRUCTION MANUAL
APPENDIX
BARFIELD INC. ENGINEERING SPECIFICATIONS
Note: For information on compliance with FAR 91-411, refer to Barfield document,
60-101-00150.
SECTION 1:
SECTION 2:
SECTION 3:
56-101-00165
/ 168 / 169 Rev. A
56-101-00164-C
Dec / 16 / 08
ALTIMETER
AIRSPEED INDICATOR
VERTICAL SPEED INDICATOR
Page 39 APPENDIX
of 63
Page 35 of 59
1811D INSTRUCTION
MANUAL
1811G/H
INSTRUCTION MANUAL
SECTION 1. ALTIMETER
The following engineering specification (Document No 23-338-00001, dated 7/24/91) details

the performance requirements of the pressure sensitive altimeters used by Barfield, Inc. to
manufacture ground support test equipment.
56-101-00165
/ 168 / 169 Rev. A
56-101-00164-C
Dec / 16 / 08
Page 41 ofAPPENDIX
63
Page 37 of 59
1811D INSTRUCTION
MANUAL
1811G/H
INSTRUCTION MANUAL
SECTION 2. AIRSPEED INDICATOR
The following engineering specification (Barfield Document No. 23-336-A0025, dated

1/8/90) details the performance requirements of the pitot static pressure type airspeed
indicators used by Barfield, Inc. to manufacture ground support test equipment.
56-101-00165
/ 168 / 169 Rev. A
56-101-00164-C
Dec / 16 / 08
Page 49 of 63
APPENDIX
Page 45 of 59
1811D INSTRUCTION
MANUAL
1811G/H
INSTRUCTION MANUAL
SECTION 3. VERTICAL SPEED INDICATOR

The following engineering specification (Document 23-337-A0025 dated 1/8/90) details
performance requirements of the pressure actuated vertical speed indicators used by
Barfield, Inc. to manufacture ground support test equipment.
56-101-00165
/ 168 / 169 Rev. A
56-101-00164-C
Dec / 16 / 08
Page 57 of 63
APPENDIX
Page 53 of 59

Barfield User Manual - 1811H-1811G-101-00165 168 169

Uploaded by

Copyright:

Available Formats

Barfield User Manual - 1811H-1811G-101-00165 168 169

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Barfield User Manual - 1811H-1811G-101-00165 168 169

Uploaded by

Copyright:

Available Formats

1811G/H PITOT-STATIC TEST SET

USER INSTRUCTION MANUAL

THIS PAGE INTENTIONALLY LEFT BLANK

THIS PAGE INTENTIONALLY LEFT BLANK

1811G / H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

THIS PAGE INTENTIONALLY LEFT BLANK

1811G / H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

THIS PAGE INTENTIONALLY LEFT BLANK

1811G / H INSTRUCTION MANUAL

Initial Release, prepared from Technical Manual

56-101-00165 / 168 / 169 Rev. A

THIS PAGE INTENTIONALLY LEFT BLANK

1811G / H INSTRUCTION MANUAL

MAINTENANCE AND REPAIR INFORMATION

56-101-00165 / 168 / 169 Rev. A

THIS PAGE INTENTIONALLY LEFT BLANK

1811G / H INSTRUCTION MANUAL

PUBLICATION BREAKDOWN ...........................................................................1

56-101-00165 / 168 / 169 Rev. A

1811G / H INSTRUCTION MANUAL

TABLE OF CONTENTS (continuation)

PERIODIC INSPECTION ........................................................................... 37

APPENDIX: ENGINEERING SPECIFICATIONS ............................................... 39

56-101-00165 / 168 / 169 Rev. A

1811G / H INSTRUCTION MANUAL

2. INFORMATION PROVIDED WITH THE UNIT

Figure 1 OWNER WARRANTY REGISTRATION CARD

1811G / H INSTRUCTION MANUAL

Figure 2 LIMITED WARRANTY STATEMENT CARD

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

THIS PAGE INTENTIONALLY LEFT BLANK

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A

1811G/H INSTRUCTION MANUAL

56-101-00165 / 168 / 169 Rev. A