All About Sewing Threads

C O AT S
Bulletin Post
S E W I N G
S O L U T I O N S
All About Sewing Threads

Contents
Introduction
What is a Sewing Thread?
What is 'Sewability'?
Thread Classification
Thread Terminology
Quality Requirements
Contact us about Coats Sewing Threads
Bulletin Post
Introduction
The smallest failure in thread performance results in losses on investments in material, equipment, garment
engineering, and labour. Hence, it is important to know your thread thoroughly. Enhancing thread knowledge,
analysing thread parameters, the right selection procedure and use of thread plays a major role in achieving good
sewing performance and the desired seam quality.
This Bulletin Post serves an introduction to the types of threads, the properties, thread construction, and
factors affecting thread performance.
What is a sewing thread?

Sewing threads are special kinds of yarns that are engineered and designed to pass through a sewing machine rapidly.
They form efficient stitches without breaking or becoming distorted during the useful life of the product. The basic
function of a thread is to deliver aesthetics and performance in stitches and seams.
What are the factors that affect functions of a sewing thread?

Factors affecting aesthetics
Colour, lustre and fineness / thickness should be considered while selecting a thread for decorative purposes such as
top stitching or embroidery.
Other considerations include:
Hue and shade matching
Colour fastness
Stitch selection
Uniformity of stitch formation
Factors affecting performance
Thread used in garments must be durable enough to
withstand the abrasion and needle heat that occur while
sewing, garment finishing, stretching and recovery
during wear.
Thread performance in garments can be evaluated
from its
Seam strength
Abrasion resistance
Elasticity
Chemical resistance
Flammability
Colour fastness
What is 'sewability'?
'Sewability' of thread is a term used to describe a sewing threads performance. A thread with good sewability is
uniform in diameter with a good surface finish. Longitudinal uniformity of thread contributes to uniform strength and
reduced friction, as it passes through the stitch forming mechanisms. It also minimises thread breakages and the
associated costs incurred from rethreading machines, repairing stitches and producing inferior quality products.
Sewability parameters
The parameters that define the superior sewability of thread are:
No breakages in high-speed sewing
Consistent stitch formation
No skipped stitches
Evenness, to prevent changes in tension during sewing
A high level of abrasion resistance
Sufficient surface smoothness, to pass easily through the machine guides
Thread classification
Thread can be classified in different ways. Some common classifications are those based on:
Substrate
Construction
Finish
Classification based on substrate

Natural
The usage of thread made from natural substrates is now minimal in industry applications. However, the most
commonly used natural thread is cotton thread.
Classification based on construction thread structure

Spun thread
Spun thread is made using natural or synthetic fibres. Spun polyester is one
of the most widely used threads. It is stronger than cotton threads of a
comparable size, and is available in a wide variety of sizes and colours.
Corespun thread
Corespun thread is a combination of staple fibres and filaments. The most
commonly used corespun thread has multiple-ply construction, with each
ply consisting of a polyester filament core with cotton or polyester fibres
wrapped around the core.
This thread structure influences the strength of filament polyester and the
sewability of cotton or polyester fibre wrap. Corespun thread is generally
used for the high-speed sewing of many garment types, especially those
requiring high seam strength.
Filament threads
Filament threads are stronger than spun threads of the same fibre and size. Three types of filament threads are
commonly used:
Monofilament thread is made from a single continuous fibre with a
specified thickness. Though monofilament is strong, uniform and
inexpensive to make, it lacks flexibility and is stiff and scratchy in feel. As
a result, usage is normally restricted to hems, draperies, and upholstered
furniture.
Smooth multifilament thread is usually made from nylon or

polyester and is used where high strength is a primary requirement. It
consists of two or more continuous filaments twisted together. It is
commonly used to sew shoes, leather garments, and industrial products.
Textured filament thread is usually made from polyester and is

used primarily as the looper thread for cover stitches. Texturing filaments
gives the yarn more cover and high extensibility, but makes the thread
more subject to snagging.
Bulletin Post
Synthetic
Due to the limitations of natural fibres, thread users have turned to threads made from synthetic fibres as they have
desirable properties of exceptionally high tenacity, high resistance to abrasion and good resistance to chemicals. They
are also not significantly affected by moisture, rot, mildew, insects or bacteria.
Some terms used in the context of thread construction are:

Twist - The twist of a thread refers to the number of turns per unit length required to hold the fibres / plies
together to give the yarn / thread substance the required strength and flexibility. A thread with an excessive twist
is also likely to give trouble while sewing due to twist liveliness, which can cause snarling, loops, knots and
possible spillage that prohibit stitch formation.
Twist direction - Direction of twist is identified as S for left twist and Z for right twist. Most single needle lock
stitch and other machines are designed for Z twist threads. S twist thread untwists during stitch formation.
Direction of twist does not affect the strength of the thread, but it can seriously impair its performance when it is
used on a machine for which it is not suited.
Ply and cord - Yarns with many components are twisted together to form ply thread. Most commonly used are
2, 3 or 4 ply threads. Threads are twisted together to give corded thread. Most commonly used are 4, 6 or 9 cord
threads.
Size - The overall thickness of the final thread is referred to as Grist, Ticket Number, Tex or Count. Thread
should be as fine as possible depending on the required strength of seam. Generally, thicker threads have greater
strength, given the same fibre content and yarn structure. Finer threads tend to blend into the fabric surface and
are less subject to abrasion than seams with heavier threads. Finer threads perform better with finer needles and
produce less fabric distortion than heavier needles.
Bulletin Post
Basics of thread construction

All conventional sewing threads begin their production cycle as simple yarns. These basic yarns are produced by
twisting together relatively short fibres or fine continuous filaments.
Bulletin Post
Classification based on thread finish

Finishes are given to a thread for two purposes
To improve sewability
Some finishes involve increasing strength, abrasion resistance and lubrication of the thread.
To achieve a specific functional requirement
Some finishes include bonding, non wick, anti-fungal, fire retardant, water repellent and anti-static finishes.
Package support
Sewing threads are put in different types of packages according to the types of thread, machines and sewing needs.
Package support is important for the thread to perform at its best during transport and usage in machines. Packages
may be colour coded according to the size and type of thread for easy identification.
Thread terminology
With a wide selection of threads to choose from, it is important to know some of the terminology associated with
significant thread properties to judge the differences between different thread types.
Tensile strength
Tensile strength is the tension at which a thread breaks, expressed in grams or kilograms (force).
Tenacity
Tenacity is the relative strength obtained by dividing the tensile strength by the thickness of the structure.
Loop strength
Loop strength is the load required to break a length of thread which is looped through another length of the same
thread.
Minimum loop strength
Minimum loop strength is the strength of the weakest loop in a series of loops (tested in a continuous length of
thread).
Elongation at break
Elongation at break is the amount by which a thread is extended at its breaking point expressed as a percentage of its
original length.
Modulus
Modulus is a term used to denote a numerical value which indicates the manner in which the textile behaves when a
tensile force is applied.
Elasticity
Elasticity is a property of the thread which enables it to recover to its original length after being extended by a set
amount.
Shrinkage
Shrinkage is the amount by which a thread contracts under the action of washing or heating.
Moisture regain
Moisture regain is the weight of moisture in a fibre or thread expressed as a percentage of weight of completely dry
material.
Requirements of good quality sewing thread

Good tensile strength
Good tensile strength holds the stitched seam securely
during wash and wear.
Smooth surface and absence of faults
Smooth surface and absence of faults ensures less
friction between the needle and the material during
high-speed sewing. The thread must be well lubricated
to increase its sewability and resistance to abrasion.
Uniform thickness / diameter
Uniform thickness / diameter results in an even sewing
thread, which moves smoothly and quickly through the
needle eye and the fabric. It also affects the threads
tensile strength, resistance to abrasion and its twist
construction. An uneven thread may twist into short
knots and jam at the eye of the needle.
Bulletin Post
Good elasticity
Good elasticity enables thread to recover its original length immediately after the tension has been released. The
elasticity of sewing thread affects the strength and the finished quality of a stitched seam.
Good colour fastness
Good colour fastness provides immunity to the different agents the thread is exposed to during manufacture and
washing. The thread must hence be uniformly dyed.
Low shrinkage
Low shrinkage of the thread being used on the fabric material with higher shrinkage reduces the chances of seam
puckering.
Good resistanceto chemical attack
Good resistanceto chemical attack is a desirable property for thread used in garments which may undergo washing,
bleaching or dry-cleaning.
Good abrasion resistance
Good abrasion resistance ensures a good sewing performance and makes the thread more durable.
The following figures show the results of thread-to-thread abrasion tests and give an indication of their respective
resistance to abrasion:
If Linen, Rayon Continuous Filament (CF) has resistance of 1, then:
Cotton = 3
Spun Silk = 4
Spun Polyester = 12
CF Polyester = 30
Spun Nylon = 40
CF Nylon = 150
Good colour fastness
Good colour fastness will retain the threads original colour without running or fading when subjected to wash and
light exposure. The thread colour should be resistant to different agents to which it is exposed during manufacture
and use.
Colour fastness can be measured against:
Chlorinated water
Perspiration
Cold water staining
Dry cleaning
Pressing - wet and dry
Bleaching
Minimal metamerism
Minimal metamerism can be achieved by assessing colour with colour matching cabinets. Metamerism is an inherent
property of a thread when the same thread colour appears to be different under different lighting conditions.
Standard illuminants are often used to counter the effects of metamerism.
Please contact your local Sales Office to find out more about sewing threads.
www.coatsindustrial.com
November 2014

All About Sewing Threads

Uploaded by

Copyright:

Available Formats

All About Sewing Threads

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

All About Sewing Threads

Uploaded by

Copyright:

Available Formats

What are the different types of sewing threads discussed?

What factors affect the sewability of a thread?

C O AT S

All About Sewing Threads

What is a sewing thread?

What are the factors that affect functions of a sewing thread?

Classification based on substrate

Classification based on construction thread structure

Smooth multifilament thread is usually made from nylon or

Textured filament thread is usually made from polyester and is

Some terms used in the context of thread construction are:

Basics of thread construction

Classification based on thread finish

Requirements of good quality sewing thread

You might also like