Rekuperator Daikin PDF

Freshen up
your air
ventilation
catalogue
Daikin Europe N.V.
ABOUT DAIKIN
Daikin has a worldwide reputation based on almost 85 years experience in the successful
manufacture of high quality air conditioning equipment for industrial, commercial and
residential use.
Daikin quality
Daikins much envied quality quite simply stems from the close attention paid to design,
production and testing as well as aftersales support. To this end, every component
is carefully selected and rigorously tested to verify its contribution to product quality
and reliability.
ENVIRONMENTAL
AWARENESS
Air Conditioning and the Environment
Air conditioning systems provide a significant level of indoor comfort, making optimum
working and living conditions possible in the most extreme climates.
In recent years, motivated by a global awareness of the need to reduce the burdens on
the environment, Daikin has invested enormous efforts in limiting the negative effects
associated with the production and the operation of air conditioners.
Hence, models with energy saving features and improved eco-production techniques
have seen the light of day, making a significant contribution to limit the impact on the
environment.
This sign highlights features where Daikin has invested into technologies to
reduce the impact of air conditioning on the environment.
This sign can be found on pages: 8 - 9 - 31
HRV - Heat Reclaim Ventilation
4 High static pressure

5 Built-in drain pump
20
20
Benefits for building owners
Connenction conditions
20
1 Energy energy saving ventilation

2 Reduces the load on the air conditiong system
3 Free cooling
8
9
9
Specifications21
accessories21
Benefits for design offices and consultants10

1 Total solution concept
2 Slim design
4 Wide range of units
5 Wide operation range
10
10
10
10
10
Benefits for installers
11
1 Simple design and construction

2 Filter cleaning
11
11
11
Benefits for end users
12
1 Create a high quality indoor environment

2 Fresh up operation
3 Low operation sound level
4 Individual control via HRV remote control
12
13
13
13
Specifications14
VAM-FA14
VKM-GM15
VKM-G16
accessories17
FXMQ-MF outdoor air processing unit
19
Benefits20
1 100% fresh air intake possible
2 Leaves maximum floor and wall space for Furniture,
decoration and fittings
3 Wide operation range
20
User friendly control Systems
23
1 Interlock of the ventilation operation

with the air conditioner operation
2 Super wiring System
23
23
Overview of control systems
24
1 Individual Control Systems

2 Centralised Control Systems
26
28
ERQ (pair) AND VRV Air Handling Applications31

Benefits31
1 High efficiency
2 High comfort levels
3 Easy design and installation
4 Total solution concept
31
31
31
31
Which system offers me the best solution?
32
1 I only need a connection to an air handling unit

2 I need an air handling unit and heating, and/or cooling
32
32
System overview
33
Control possibilities
34
Selection of air handling units
36
1 Pair application
2 Multi application
36
37
Specifications38
20
20
Which system offers me

the best solution?
With the advent of new building regulations, greater awareness of increasing energy costs and a responsibility towards
environmental issues, modern commercial spaces are insulated better than ever. Double glazing, thicker roof insulation and
draught excluders of course, help considerably towards reducing heating/cooling demand and burdens on the environment.
The down-side however, is that these same commercial spaces have now become, in effect, sealed boxes with little or no
replenishment of the air.
Daikin offers a variety of solutions for the provision of fresh air ventilation to offices, hotels, stores and other commercial
outlets each one complementary to and as flexible as both Sky Air and VRV systems themselves.
Heat Reclaim Ventilation

Proper ventilation is a key component of climate control in buildings, offices and shops. In its basic function, it ensures
a flow of incoming fresh air and outgoing stale air. Our HRV (heat reclaim ventilation) solution can do much more. It can
OPTIMISE THE BALANCE BETWEEN INDOOR AND OUTDOOR

TEMPERATURE AND HUMIDITY , thus reducing the load on the system and increasing efficiency.
recover heat and
Outdoor Air Processing in a single unit
COMBINE FRESH AIR

TREATMENT AND AIR CONDITIONING IN A SINGLE SYSTEM , thereby eliminating
Our FXMQ-MF air processing solution uses heat pump technology to
the usual design problems associated with balancing air supply and discharge. Total system cost is reduced and design
flexibility enhanced because the indoor air conditioning fan coil units and an outdoor air treatment unit can be connected
to the same refrigerant line.
erq (pair) and VRV air handling applications

For small, medium and large commercial spaces, we offer a range of R-410A inverter condensing units that provide air
handling and air conditioning. This approach combines the flexibility of our ERQ and VRV units with Air Handling Applications,
OPTIMUM CONTROL OF INDOOR AIR QUALITY

AND MAXIMUM EFFICIENCY .
resulting in a simple, reliable design for
overview ventilation range

Ventilation: provision of fresh air
1
3
Air processing: optimise the balance between

indoor and outdoor fresh air temperature
Type
name
VAM-FA
Components
of indoor air quality
1
Humidification: optimise the balance

between indoor and outdoor humidity
Air flow rate (m3/h)

0
200
400
600
1 Ventilation
Heat
Reclaim
Ventilation
VKM-G
VKM-GM
FXMQ-MF
ERQ AND VRV

AIR HANDLING
APPLICATIONS2
EKEXV-kit
1 Ventilation
3 Air processing
1 Ventilation
2 Humidification
3 Air processing
2
OUTDOOR AIR
PROCESSING
UNIT1
1
3
1 Ventilation
3 Air processing
1 Ventilation
3 Air processing
Not connectable to VRVIII-S (RXYSQ-PAV, RXYSQ-PAY)

Air flow rate is a calculated indication only, based on the following values: heating capacity EKEXV-kit * 200m/h
800
1,000 1,500 2,000
4,000
6,000
8,000
HRV - Heat reclaim ventilation

Ventilation, humidification & air processing
HRV helps to create a high quality indoor environment

The Daikin HRV (Heat Reclaim Ventilation) unit recovers heat energy lost
through ventilation and maintains a comfortable and clean indoor environment
without changes in room temperature. This also reduces the load on the air
conditioning system and saves energy.
In addition, the HRV interlocks with Daikins air conditioning systems (for
example VRV and Sky Air) and automatically switches over to ventilation mode
when needed, further increasing the effects of energy conservation. HRV can
be integrated on the air conditioner remote control allowing total control over
air conditioning and ventilation via a simple configuration.
The current line-up includes models with or without DX coil and/or humidifier.
The DX coil helps to prevent the direct impact of cold airflow upon persons
during the heating cycle and vice versa, the humidifier optimises the balance
between indoor and outdoor humidity.
Finally high static pressure enhances design flexibility.
benefits for building owners

Energy saving ventilation
Buildings need year round ventilation. In traditional ventilation systems the conditioned inside air is lost when exhausted
externally and new unconditioned air is brought into the building. This results in large amounts of air being heated up or
cooled down over and above the actual load of the air conditioning system and leads to a substantial waste of energy.
The Daikin HRV system however, automatically balances outside and inside temperature and humidity enabling the recovery
of heat/cold with significant savings in running costs.
Specially developed HEP element

The heat exchange element uses a high efficiency paper (HEP) possessing superior moisture absorption and humidifying
properties. The heat exchange unit rapidly recovers heat contained in latent heat (vapour). The element is made of a material
with flame resistant properties and is treated with an anti-moulding agent.
Operation of the high effiency paper.

Outdoor
30.6C
62% RH
Indoor
SA
27.4C
63% RH
Temperature
and humidity
32C
70% RH
RA
26C
50% RH
Integrally-formed liner
RH: Relative Humidity
SA: Supply Air (to room)
RA: Return Air (from room)
SA
Integrallyformed liner
RA
Reducing the load on the air conditioning system

Thanks to the use of heat reclaim ventilation the load on the air conditioning is reduced with approximately 31%.
- 23% by operating in total heat exchange mode (in comparison with normal ventilation fans)
- another 6% by auto-ventilation mode changeover switching
- a further 2% by pre-cool, pre-heat control (reduces air conditioning load by not running the HRV shortly after the air
conditioning is switched on.)
Note: the values mentioned above may vary according to weather and other environmental conditions at the location of the units installation
Operation automatically switches to the optimum pattern to suit prevailing conditions
Air conditioning in cooling

Heat exchanger
Exhaust fan Damper element (heat recovery)
Air conditioning in heating

Heat exchanger
element (heat recovery)
Air conditioning off

In between (bypass ventilation)
EA
RA
EA
RA
OA
SA
OA
SA
Automatic
changeover
Air supply fan
RA
EA
Automatic
changeover
SA
OA
DX coil (heating)
DX coil (cooling)
Example: Outdoor temp. 30C

Indoor temp. 22C
EA: exhaust air
OA: outdoor air
Humidifying
Example: Outdoor temp. -5C

Indoor temp. 22C
RA: return air (from room)
SA: supply air (to room)
Temp.
C
Free cooling
Morning
Day time
Night
26
The free cooling option reduces the air conditioning energy

consumption and uses energy in a more efficient way by actively
introducing fresh air into rooms. Free cooling maintains indoor
comfort through the introduction of low temperature outdoor air
into rooms.
Set 21
temp.
Outdoor
temp.
16
Free cooling possible
Free cooling possible
Example of free cooling during summer

Temp.
C
Note: Free cooling is only available in combination with Intelligent Touch Controller
Morning
Day time
Set 21
temp. 19
Outdoor
temp.
16
Nighttime free cooling operation
Night
100% free cooling possible
Example of free cooling during intermediate season
Nighttime free cooling operation is an energy saving function

operating at night when the air conditioning is switched off.
By ventilating rooms containing office equipment that increases
room temperature, night purge reduces the cooling load when
air conditioning is switched on in the morning, reducing the daily
running costs.
Temp.
40
30
20
Outdoor Temp.
Setting Temp.
Indoor Temp.
2 Hours
auto
start
VKM
Nighttime free cooling operation is factory set to off but can be activated by your Daikin dealer
on request.
Nighttime free cooling operation only available on VKM units connected to a VRV system
on
off
on
Air
Conditioner off
start
benefits for design offices

and consultants
Total solution concept - integrated ventilation
The integration of ventilation into a total building climate system, such as the VRV system, offers numerous advantages. Daikin
supplies software which simulates the working of the entire system, simplifying its design and presenting an ideal solution for
the building itself and a one-stop solution for the client.
As well as design benefits, it also simplifies project follow-up, installation and subsequent commissioning and maintenance
since only one party is involved.
Finally, the end user benefits from interlocking ventilation with air conditioner operation by virtue of greatly simplified overall
system control.
Note: more information on integrated control can be found in the control systems chapter
Slim Design
The slim design of the HRV unit enables it to be mounted in narrow ceiling voids and
irregularly shaped spaces.
Installation
under the floor of a small building
Installation under a beam
285mm
VAM250FA
Installation in an irregular space
Higher static pressure and reduced noise

The use of multiple, overlapping arc shaped
fan blades makes it possible to optimize the
chord lenght and blade outlet angle.
High Static Pressure
Rotating currents for reduced loss

The use of a thinner scroll allows rectification
of rotating currents within the scroll.
External static pressure (ESP) up to 160 Pa

facilitates the use with flexible ducts of
varying lengths.
Higher static pressure

Thanks to wide fan
diameter and optimized
blade width
Wide range of units

The wide Daikin unit range ensures correct equipment design and sizing.
10
Higher static pressure and reduced pressure loss
In addition to increasing the scroll

wrap angle and boosting the static
pressure, the outflow angle has been
optimized.
Wide operation range
VAM
Cooling
50CDB
50
The HRV unit can be installed in practically any location.

The standard operation range (outdoor temperature) is from -15C to 40CDB
(50CDB for VAM units) and can be extended down to -25C if a pre heater is
installed.
1
VKM
Cooling
40CDB
40
30
20
10
Contact your local dealer for more information and restrictions
-20
-30
-15
CDB
-25CDB
-15
CDB
with
optional
preheater
-10
with
optional
preheater
-25CDB
benefits for installers

Simple Design and Construction
Switch box
Access
door
Upside down
installation
Horizontal
installation
Maintenance cover
The unit can be installed either horizontally or

upside down always allowing easy access for
inspection and maintenance.
A 450 mm square inspection hatch enables
maintenance and heat exchange element
replacement to be performed with ease.
Also no drain connection is needed, further
simplifying the installation.
Filter Cleaning
A signal on the remote control indicates when the air filter needs cleaning.
11
benefits for end users
Creating a high quality indoor environment

100
Heating and cooling
80
60
+
Heat recovery
Effect of full heat exchange
Humidifying
Outdoor air
temperature in summer
Effect of cooling
40
Indoor temperature during cooling
Effect of
humidification
20
Indoor temperature during heating

Outdoor air
temperature in winter
Relative humidity (%)
In addition to the HEP high efficiency

paper, VKM models contain a DX-coil and
humidifier (VKM only), thereby balancing the
incoming fresh air with indoor temperature
and humidity and ensuring the best possible
indoor environment.
Effect
Effectofofheating
heating
Effect
fullheat
heat exchange
exchange
Effect
ofof
full
-5
10
15
20
25
30
35
40
Dry bulb temperature (CDB)
Operation of humidicicaton and air processing

in heating mode (VKM-GM)
Exhaust Fan
EA
(Exhaust air to outdours)
Heat Exchanger
Elements
Damper Motor
Damper
DX coil
(Direct expansion coil)
OA
(Fresh air from outdoors)
RA
(Return air from room)
SA (Supply air to room)

Air Supply Fan
Electronics Box (Control box)
Float switch
Humidifier element:
Utilizing the principle of capillary action,
water is permeated throughout the
humidifier element. The heated air from
the DX coil passes through the humidifier
and absorbs the moisture.
water
AIRFLOW
Drain pan
12
Solenoid valve
SA
Drain
Fresh-Up Operation
The user can select 2 fresh-up modes via the remote control for a more comfortable air environment.
1. Supply rich mode:
2. Exhaust fresh-up:
Raising the air supply maintains proper room pressure to

prevent back-flow of toilet/kitchen odours or moisture
inflow.
Raising exhaust air decreases room pressure to prevent the

leaking of odours or floating bacteria into other rooms.
Portion of fresh-up
Normal
operation

HRV
Air exhaust
Air exhaust
ventilation fan
Air supply
HRV
Floor area
Air supply
Portion of
Sick room
exhaust
operation
eg. Office
eg. Hospital
low operation sound level

Continues research by Daikin into reducing operation
sound levels has resulted in sound pressure levels down
to 20.5dBA (VAM150FA)
Daikin
indoor
units
dBA
Perceived loudness
Sound
0
20
Treshold of hearing
Extremely soft
Rustling leaves
40
60
80
100
120
Very soft
Moderately loud
Very loud
Extremely loud
Threshold of feeling
Quiet room
Normal conversation
City traffic noise
Symphonic orchestra
Jet taking off
Dust Prevention
When the HRV is operating independently, the fan in an interlocked indoor unit
continues turning, so dust does not fall from the air filter.
Systems without dust prevention
OFF
Dust
With Daikin HRV
Blowing mode
No dust is blown out
13
VAM-FA
Heat reclaim ventilation
VAM800FA
SPECIFICATIONS
VENTILATION
Power input 50Hz
Power input 60Hz
VAM150FA8VE VAM250FA8VE VAM350FA8VE VAM500FA8VE VAM650FA8VE VAM800FA8VE VAM1000FA8VE VAM1500FA8VE VAM2000FA8VE

0.116/
0.141/
0.194/
0.212/
0.380/
0.451/
0.469/
0.864/
0.953/
0.100/0.056 0.112/0.062 0.175/0.111 0.189/0.118 0.325/0.227 0.400/0.346 0.432/0.349 0.758/0.655 0.767/0.653
heat exchange mode
nom.
ultra high/
kW
high/low
bypass mode
nom.
ultra high/
kW
high/low
0.116/
0.141/
0.194/
0.212/
0.380/
0.451/
0.469/
0.864/
0.953/
0.100/0.056 0.112/0.062 0.175/0.111 0.189/0.118 0.325/0.227 0.400/0.346 0.432/0.349 0.758/0.655 0.767/0.653
heat exchange mode
nom.
ultra high/
kW
high/low
0.117/
0.138/
0.226/
0.253/
0.432/
0.514/
0.571/
0.981/
1.017/
0.099/0.056 0.119/0.062 0.214/0.120 0.232/0.125 0.384/0.251 0.471/0.408 0.537/0.419 0.929/0.754 1.021/0.779
bypass mode
nom.
ultra high/
kW
high/low
0.117/
0.138/
0.226/
0.253/
0.432/
0.514/
0.571/
0.981/
1.017/
0.099/0.056 0.119/0.062 0.214/0.120 0.232/0.125 0.384/0.251 0.471/0.408 0.537/0.419 0.929/0.754 1.021/0.779
Temperature
exchange
ultra high
efficiency 50Hz
Enthalpy
exchange
cooling
efficiency 50Hz
Operation mode
ultra high
74
72
75
58
74
61
75
58
60
61
Heat exchange mode / Bypass mode / Fresh-up mode
Heat exchange system
Air to air cross flow total heat (sensible + latent heat) exchange
Heat exchange element
Specially processed non-flammable paper
Casing
material
Dimensions
unit
Weight
unit
Galvanised steel plate

heightxwidthxdepth
mm
285x776x525
301x828x816
364x1,004x868
24
33
48
kg
type
Fan
Fan motor
Sound
pressure
level - 50Hz
132
158
air flow rate 50hz
heat exchange
ultra high/
kW
mode/bypass mode high/low
150/
150/110
250/
250/155
350/
350/230
500/
500/350
650/
650/500
800/
800/670
1,000/
1,000/870
1,500/
2,000/
1,500/1,200 2,000/1,400
air flow rate 60hz
heat exchange
ultra high/
kW
150/
150/110
250/
250/145
350/
350/210
500/
500/300
650/
650/300
800/
800/670
1,000/
1,000/800
1,500/
2,000/
1,500/1,200 2,000/1,400
external static
pressure - 50hz
ultra high/high/low
Pa
69/39/20
64/39/20
98/70/25
98/54/25
93/39/25
137/98/49
157/98/78
137/98/49
137/78/59
external static
pressure - 60hz
ultra high/high/low
Pa
98/54/24
98/54/20
142/85/15
147/54/20
162/69/34
225/118/69 196/108/69 206/118/69
196/88/69
output
50 hz
heat exchange
mode
ultra high/high/low
dBA
27 / 28.5/26 /
27.5/20.5 / 21.5
28 / 29/26 /
27/21 / 22
32 / 34/31.5 / 33 / 34.5/31.5 / 34.5 / 35.5/33 / 36 / 37/34.5 /

33/23.5 / 26 33/24.5 / 26.5 34/27 / 28
36/31 / 32
bypass mode
ultra high/high/low
dBA
27 / 28.5/26.5 /
27.5/20.5 / 21.5
28 / 29/27 /
28/21 / 22
32 / 34/31 / 33.5 / 34.5/32.5 / 34.5 / 35.5/34 / 36 / 37/34.5 / 36 / 37/35.5 / 40.5 / 41.5/38 / 40 / 42.5/38 /
32.5/24.5 / 26.5 33.5/25.5 / 27.5 35/27 / 28.5
36/31 / 33
36/31 / 32
39/33.5 / 36
41/35 / 37
min.
90
140
230
36 / 37/35 / 39.5 / 41.5/38 / 40 / 42.5/38 /
36/31 / 32
39/34 / 36
41/35 / 37
34/31/24
36/33/27
37/35/30
40.5/38/33
41/38/35
dBA
35/33/24
35.5/34/27
37/35/31
40.5/38/33
41/38/35
28/27/20
29/27/20.5
34.5/33/22
CDB
max.
CDB
%
mm
drain
-15
50
80% or less
100
150
200
250
350
Insulation material
Power supply phase/frequency/voltage
30
dBA 28.5/26.5/19 29.5/26/19.5 34.5/32/22
relative humidity
Connection duct diameter

Piping
connections
61
Sirocco fan
Sound pressure heat exchange mode ultra high/high/low

level - 60Hz
bypass mode
ultra high/high/low
Operation
range
364x1,004x1,156 726x1,514x868 726x1,514x1,156
Self-extinguishable urethane foam

Hz/V
1~/50/60/220-240/220
(1) Operation sound is measured at 1.5m below the center of the body. (2) Normal amplitude, input and efficiency depend on the mentioned conditions. (3) Sound values are measured in an anechoic chamber. Operating sound level generally becomes
higher than this value depending on the operating conditions, reflected sound, and peripheral noise. (4) The specifications, designs and information here are subject to change without notice.
14
VKM-G
Heat reclaim ventilation,

air processing and humidification
VKM80-100G
SPECIFICATIONS
VENTILATION
Power input 50Hz
VKM50G
VKM80G
VKM100G
heat exchange
nom.
mode
ultra high/
kW
high/low
0.560/
0.490/0.420
0.620/
0.560/0.470
0.670/
0.570/0.480
bypass
mode
ultra high/
kW
high/low
0.560/
0.490/0.420
0.620/
0.560/0.470
0.670/
0.570/0.480
kW
kW
4.71 (2)
5.58 (3)
7.46 (2)
8.79 (3)
9.12 (2)
10.69 (3)
76
78
74
64
66
62
nom.
cooling
Fresh air
conditioning load heating
Temperature exchange
ultra high
efficiency - 50Hz
Enthalpy exchange
cooling
efficiency - 50Hz
Operation mode
material
Casing
unit
Dimensions
unit
Weight
rows
stages
Heat exchanger
fin pitch
face area
type
Fan
Fan motor
Sound pressure
level - 50Hz
ultra high
heightxwidthxdepth
mm
kg
quantity
quantity
mm
m
air flow rate - heat exchange

ultra high/
kW
50hz
external static
ultra high/high/low
pressure - 50hz
Pa
output
50 hz

387x1,764x832
387x1,764x1,214
96
109
2
12
2.2
0.078
0.118
Sirocco fan
114
0.165
500/
500/440
750/
750/640
950/
950/820
180/150/110
170/120/80
150/100/70
280
heat exchange ultra high/

mode
high/low
dBA
38 / 38.5 / 39/36 / 36.5 / 37/33.5 / 34.5 / 35.5
40 / 41 / 41.5/37.5 / 38 / 39/34.5 / 36 / 37
40 / 40.5 / 41/38 / 38.5 / 39/35 / 36 / 36.5
bypass
mode
dBA
38 / 38.5 / 39/36 / 36.5 / 37/33.5 / 34.5 / 35.5
40 / 41 / 41.5/37.5 / 38 / 39/34.5 / 36 / 37
40 / 40.5 / 41/38 / 38.5 / 39/35 / 36 / 36.5
ultra high/
high/low
around unit
Operation range supply air
return air
control
Refrigerant
liquid
type/OD
Piping
gas
type/OD
connections
drain
Insulation material
Power supply
phase/frequency/voltage
CDB
CDB
CDB
mm
mm
mm
Hz/V
0C~40CDB, 80% RH or less

-15C~40CDB, 80% RH or less
Electronic expansion valve
200
250
Flare connection/6.35
PT3/4 external thread
1~/50/220-240
(1) Cooling and heating capacities are based on the following conditions: Fan is based on High and Ultra High. The figures in parenthesis indicate the heat reclaimed from the heat recovery ventilator. When calculating the capacity as indoor units,
use 3.5kW. (2) Cooling: indoor temp. 27CDB, 19CWB; outdoor temp. 35CDB (3) Heating: indoor temp. 20CDB; outdoor temp. 7CDB, 6CWB (4) OA: fresh air from outdoors, RA: return air from the room (5) The specifications, designs and information
here are subject to change without notice. (6) Cooling and heating capacities are based on the following conditions: Fan is based on High and Ultra High. The figures in parenthesis indicate the heat reclaimed from the heat recovery ventilator. When
calculating the capacity as indoor units, use 5.6kW. (7) Cooling and heating capacities are based on the following conditions: Fan is based on High and Ultra High. The figures in parenthesis indicate the heat reclaimed from the heat recovery ventilator.
When calculating the capacity as indoor units, use 7.0kW.
15
VKM-GM
Heat reclaim ventilation

and air processing
VKM80-100GM
SPECIFICATIONS
VENTILATION
Power input 50Hz
VKM50GM
VKM80GM
VKM100GM
Heat exchange mode Nom.
Ultra high/
kW
High/Low
0.560/
0.490/0.420
0.620/
0.560/0.470
0.670/
0.570/0.480
Bypass mode
Ultra high/
kW
High/Low
0.560/
0.490/0.420
0.620/
0.560/0.470
0.670/
0.570/0.480
Fresh air
Cooling
conditioning
Heating
load
Temperature
Ultra high
exchange efficiency
- 50Hz
Enthalpy
Cooling
exchange
efficiency - 50Hz
Operation mode
System
Humidifier
Material
Casing
Unit
Dimensions
Unit
Weight
Rows
Stages
Heat exchanger
Fin pitch
Face area
Type
Fan
Air flow rate 50Hz
Nom.
kW
4.71 (2)
7.46 (2)
9.12 (2)
kW
5.58 (3)
8.79 (3)
10.69 (3)
76
78
74
64
66
62
%
Ultra high
HeightxWidthxDepth
mm
kg
Quantity
Quantity
mm
m
Heat exchange ultra high/
mode/Bypass
kW
high/low
mode
External static
Ultra high/High/Low
pressure - 50Hz
Output
50 Hz
Fan motor
Sound pressure Heat exchange mode Ultra high/High/Low
level - 50Hz
Bypass mode
Ultra high/High/Low
Around unit
Operation
Supply air
range
Return air
Control
Refrigerant
Liquid
Type/OD
Gas
Type/OD
Piping
connections
Water supply
Drain
Insulation material
Power supply Phase/Frequency/Voltage
Pa
W
dBA
dBA
CDB
CDB
CDB
mm
mm
mm
mm
Hz/V

Natural evaporating type
387x1,764x832
387x1,764x1,214
102
120
2
12
2.2
0.078
0.118
Sirocco fan
125
0.165
500/
500/440
750/
750/640
950/
950/820
160/120/100
140/90/70
110/70/60
37 / 37.5 / 38/35 / 35.5 / 36/32 / 33 / 34

37 / 37.5 / 38/35 / 35.5 / 36/32 / 33 / 34
200
280
38.5 / 39 / 40/36 / 37 / 37.5/33 / 34 / 35.5
39 / 39.5 / 40/37 / 37.5 / 38/34 / 34.5 / 35.5
38.5 / 39 / 40/36 / 37 / 37.5/33 / 34 / 35.5
39 / 39.5 / 40/37 / 37.5 / 38/34 / 34.5 / 35.5
-15C~40CDB, 80% RH or less
250
6.4
PT3/4 external thread
1~/50/220-240
(1) Cooling and heating capacities are based on the following conditions: Fan is based on High and Ultra High. The figures in parenthesis indicate the heat reclaimed from the heat recovery ventilator. When calculating the capacity as indoor units, use
3.5kW. (2) Cooling: indoor temp. 27CDB, 19.0CWB; outdoor temp. 35CDB (3) Heating: indoor temp. 20CDB; outdoor temp. 7CDB, 6CWB (4) Humidifying capacity: indoor temp. 20CDB, 15CWB; outdoor temperarure 7CDB, 6CWB (5) Operation
sound measured at 1.5m below the center of the unit is converted to that measured in an anechoic chamber, built in accordance with JIS C1502 condition. (6) The actual operation sound varies depending on the surrounding conditions (near running
units sound, reflected sound etc.) and is normally higher than this value. (7) The sound level at the air discharge port is about 8-11dB higher than operating sound of the unit. For operation in a quiet room, it is required to take measures to lower the
sound, for example install more than 2m soft duct near the air discharge grille. (8) Normal amplitude, input and efficiency depend on the mentioned conditions. (9) OA: fresh air from outdoors, RA: return air from the room (10) The specifications, designs
and information here are subject to change without notice. (11) Cooling and heating capacities are based on the following conditions: Fan is based on High and Ultra High. The figures in parenthesis indicate the heat reclaimed from the heat recovery
ventilator. When calculating the capacity as indoor units, use 5.6kW. (12) Cooling and heating capacities are based on the following conditions: Fan is based on High and Ultra High. The figures in parenthesis indicate the heat reclaimed from the heat
recovery ventilator. When calculating the capacity as indoor units, use 7.0kW.
16
Silencer
Duct adapter
Accessories
OTHERS
High eciency lter
-65%
-90%
VAM150FA VAM250FA VAM350FA VAM500FA VAM650FA VAM800FA VAM1000FA VAM1500FA VAM2000FA VKM50GA(M) VKM80-100GA(M)
YAFM323F15 YAFM323F25 YAFM323F35 KDDM24A50
KDDM24A100
KAF241G80M KAF241G100M
KDDM24A100
2 x KDDM24A100
KAF242G80M KAF242G100M
YAFF323F15 YAFF323F25 YAFF323F35 YAFF323F50
Replacement long life lter

Filter chamber 1
Silencer
YAFF323F65
YAFF323F100 2 x YAFF323F65 2 x YAFF323F100

KDDM24B100
250mm
Nom. piping diameter

YAFF323F50
Duct adapter
YAFF323F65
Nom. piping diameter
YDFA25AEI
250mm
Notes
(1) Filter chamber has a suction-type flange. (Main unit does not).
Some options may not be usable due to the equipment installations conditions. Please conrfirm prior to ordering.
Some options may not be used in combination.
Operating sound may increase somewhat depending on the options used.
INDIVIDUAL CONTROL SYSTEMS

Wired remote control
VAM wired remote control
CENTRALISED CONTROL SYSTEMS

Centralised remote control
Unied ON/OFF control
Schedule timer
VAM-FA
BRC1E52A / BRC1D52
BRC301B61
VKM-GA(M)
BRC1E52A / BRC1D52
BRC301B61
VAM-FA
DCS302C51
DCS301B51
DST301B51
VKM-GA(M)
DCS302C51
DCS301B51
DST301B51
OTHERS
VAM-FA
VKM-GA(M)
Wiring adapter for electrical appendices (control and monitoring F1 F2)

Wiring adapter for electrical appendices (control and monitoring P1 P2)
Adapter for humidier (running ON signal output)
Adapter for heater control kit
Remote sensor
KRP2A51
KRP50-2
BRP4A50
-
KRP2A51
KRP50-2
BRP4A50
-
Notes
(1) Cool/heat selector required for operation
(2) Do not connect the system to DIII-net devices (Intelligent controller, Intelligent Manager, LonWorks interface, BACnet interface).
17
FXMQ-MF - Outdoor

Air Processing Unit
Ventilation & air processing
Combined fresh air treatment and

air conditioning via a single system
Both fresh air treatment and air conditioning can be achieved successfully
in a single system via heat pump technology. This without the usual design
problems associated with balancing air supply and discharge. Air conditioning
indoor units and an outdoor air processing units can be connected to the same
refrigerant circuit, resulting in enhanced design flexibility and a significant
reduction in total system costs.
19
benefits
100% Fresh Air Intake Possible
Outdoor air processing units can be used exclusively to provide 100% fresh air into the building. Even if only partly used the
system reduces the load on the air conditioner by adjusting the outdoor air temperature via fixed discharge temperature
control.
Leaving maximum floor and wall space for Furniture, decoration and fittings
Wide operation range
FXMQ-MF
The outdoor air processing unit can be installed practically anywhere. The unit
operates at outdoor ambients up to 43C in cooling mode and down to -5C in
heating mode.
50
High static pressure
20
43C
40
30
10
External static pressure (ESP) up to 225 Pa allows the use of extensive ductwork
runs and facilitates the use with flexible ducts of varying lengths. Ideal for use in
large areas.
-5C
-10
Built-in drain pump

A drain pump kit increases the reliability of the drain system 1
1
Drain pump kit available as accessory
Connection Conditions
The total connected capacity of the standard indoor units and fresh air treatment units must be between 50% and
100% of the capacity of the air conditioning outdoor units. The connected capacity of the fresh air treatment units must
not exceed 30% of the capacity of the air conditioning outdoor units.
A fresh air treatment unit can also be used exclusively. The connected capacity of the fresh air treatment unit must be
between 50% and 100% of the capacity of the air conditioning outdoor unit.
Connectable outdoor units:

20HP
- VRVIII Heat pump Optimised for heating (RTSYQ)

- VRVIII Heat pump High COP combination (RXYHQ)
- VRVIII Heat pump Small footprint combination (except 5HP unit) (RXYQ)
VRV III Series

Outdoor Units
Outdoor Air processing Unit
Indoor Unit
Indoor Unit
3x 5HP
Indoor Unit
Outdoor Air
Processing unit 5HP
Air Conditioning
20
Outdoor Air Supply
FXMQ-MF
Specifications
Outdoor air processing unit, ventilation

and air processing
125, 200, 250
FXMQ200-250MF
SPECIFICATIONS
VENTILATION
Capacity
Power input
Casing
Dimensions
Weight
Heat exchanger
Fan
Fan motor
Refrigerant
Refrigerant
Piping
connections
Power supply
cooling
kW
heating
kW
cooling
kW
heating
kW
material
unit
height x width x depth mm
unit
kg
rows
quantity
stages
quantity
fin pitch
mm
face area
m
type
air flow rate - 50hz heat exchange mode/bypass mode
model
type
control
liquid
type/OD
mm
gas
type/OD
mm
drain
Hz/V
FXMQ125MF
14.0
8.9
0.359
0.359
FXMQ200MF
22.4
13.9
0.548
0.548
Galvanised steel
470x744x1,100
86
FXMQ250MF
28.00
17.40
0.638
0.638
470x1,380x1,100
123
3
26
2.0
0.28
0.65
Sirocco fan
18.0 - 28.0 - 35.0
D13/4G2DA1
R-410A
Braze connection/19.1
PS1B
1~/50/220-240
(1) Cooling: outdoor temp.: 33CDB, 28CWB (68%RH), discharge set temperature: 18CDB, equivalent piping length 7.5m (horizontal) (2) Heating: outdoor temp. 0CDB, -2.9CWB (50%RH); discharge set temp. 25CDB; equivalent piping length: 7.5m
(horizontal) (3) Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. (4) The air filter is not a standard accessory, but please mount it in the duct system of the suction side. Select its colorimetric method
(gravity method) 50% or more. (5) When connected to VRV water-cooled outdoor units a mix of ventilation units and VRV indoor units is not possible
ACCESSORIES
OTHERS
High eciency lter
-65%
-90%
Replacement long life lter

Filter chamber 1
Drain pump kit
Adapter for wiring
FXMQ125MF
FXMQ200-250MF
KAFJ372L140
KAFJ373L140
KAFJ371L140
KDJ370SL140
KAFJ371L280
KDJ370SL280
KDU30LL250VE
KRP1B61
Notes
INDIVIDUAL CONTROL SYSTEMS

FXMQ-MF
BRC1E52A / BRC1D52
CENTRALISED CONTROL SYSTEMS
FXMQ-MF
DCS302C51
Unied ON/OFF control
DCS301B51
Schedule timer
DST301B51
OTHERS
FXMQ-MF
Wiring adapter for electrical appendices

(control and monitoring F1 F2)
KRP2A61
Wiring adapter for electrical appendices

(control and monitoring P1 P2)
KRP4A51
21
22
user friendly CONTROL SYSTEMS

Interlock of the ventilation operation with the air conditioner operation
Interlock of the ventilation operation with the air conditioner operation greatly simplifies overall system control. The same
remote control centralizes air conditioning and ventilation operations, obviating any need for ventilation remote control
installation work. Using a centralized remote control also frees the user to choose from a wide range of control systems that
integrate air conditioning and ventilation. By incorporating a variety of centralized control equipment, the user can build a
large, high grade centralized control system.
Linked control of FXMQ-MF and HRV is not supported
VRV indoor unit
ON/OFF signal
Cooling/Heating mode signal
Set temperature signal
Ventilation signal
Humidifier ON/OFF signal
Interlocking
Operating mode signal

Filter cleaning signal
Faillure detection signal
HRV
Super Wiring System

A Super Wiring system is used to enable the shared use of wiring between indoor units, outdoor units and the centralised remote
control.
This system makes it easy for the user to retrofit the existing system with a centralised remote control, simply by connecting it
to the outdoor units.
Thanks to a non polarity wiring system, incorrect connections become impossible and installation time is reduced.
Indoor
unit
VKM
Outdoor
unit
23
Overview of control systems

Individual Control Systems
5 individual control systems give the user control over the VRV system and the combined ventilation.
BRC1D52 and BRC1E52A/B are wired remote controllers, giving access to room temperature settings, schedule timer,
Next to that they also have user friendly HRV functions.
BRC301B61 is a wired controller especially designed for VAM units.
BRC2C51 and BRC3A61 are compact, easy to use remote controllers, ideal for use in hotel bedrooms.
VAM remote control

BRC301B61

BRC1E52A/B

BRC1D52
Centralised control systems

By combining the (optional) centralised control equipment listed below, the user can achieve a wide range of comprehensive
centralised control systems for air conditioning and ventilation.
Centralised
remote control
DCS302C51
Unified ON/OFF control

DCS301B51
Schedule timer
DST301B51
Network solutions
HRV and the Outdoor Air Processing unit are connectable to all current Daikin network solutions:
Basic solution for control and management of up to 2,000 indoor units (Sky Air and VRV).
Allows detailed and easy monitoring and operation of VRV systems
(maximum 2 x 64 control groups).
The ideal solution for full control and management of maximum 1,024 VRV indoor units.
LonWorks Interface
Open network integration of VRV monitoring and control functions into LonWorks networks.
BACnet Interface
Integrated control system for seamless connection between VRV and BMS systems.
For more information consult the Daikin controls systems brochure or contact your local dealer
24
DESCRIPTION
VAM remote control
HRV
FXMQ-MF
BRC301B61
BRC1D52 / BRC1E52A/B
Wired air conditioner remote control

DCS302C51
Unified on/off control
DCS301B51
Schedule timer
DST301B51
DS net adapter
DTA113B51
Intelligent touch controller
DCS601C51
Intelligent Manager
DAM602B51/B52
LonWorks interface
DMS504B51
BACnet interface
DMS502A51
Wiring adapter for electrical appendices (1)

Wiring adapter for electrical appendices (2)
KRP2A61
-
KRP4A51
25
BRC1E52A/B
BRC1D52
Individual Control Systems
Control up to 16 indoor units or 8 HRV units (1group)

Easy to use: all main functions directly accessible
Easy setup: improved graphical user interface for advanced menu settings
Simultaneous ON/OFF of HRV and air conditioner (BRC1D52/BRC1E52A/B)
Airflow rate switching (initial setting)
Ventilation mode switching (initial setting)
Self diagnostic functions
Filter sign display and reset
Timer settings, simultaneous control with air conditioner (BRC1D52/BRC1E52A/B)
ON/OFF of VAM (BRC301B61)
Independent operation of HRV
Timer settings (BRC301B61)
Fresh-up mode switching (HRV only)
(Selectable: supply rich mode, exhaust rich mode; initial setting)
Notes:
The remote control wired to the FXMQ-MF cannot be set as master remote control. Otherwise, when set to auto, the
operation mode will switch according to outdoor air conditions, regardless of indoor temperature.
BRC301B61
26
A variety of units can be controlled using only the BRC1D52 or the BRC1E51A (HRV only)
Group Control
One air conditioner remote control simultaneously controls up to 16 air conditioning and HRV units.
Control using 2 remote controls
Allows control of air conditioning and HRV units from two locations by connecting two air conditioner remote controls.
(group control is possible)
Long-distance Remote Control
Remote operation control - from a distant control room for example - is possible thanks to wiring of up to 500 m.
(2 remote controllers possible)
Indoor units
Long distance
remote control
Up to 500m
HRV
Control using 2
remote controls
Up to 500m
Group control
BRC1E52A/B no2
BRC1E52A/B no1
*1: Count VKM unit as two air conditioner indoor units. For details,
System
Characteristics
HRV
Operation
system
Independent
see below.
System construction (hrv only)
HRV
BRC1D52
BRC1E52A/B
BRC301B61
BRC1D52
BRC1E52A/B
BRC301B61
Standard system
BRC1D52
BRC1E52A/B
During group control operation, the VKM unit has a capacity equivalent
to 2 standard indoor units. Up to 16 standard indoor units can be connected at the same time.
Connectable indoor units:
VKM
0 1 2 3 4 5 6 7 8
Max. no. of VRV 16 14 12 10 8 6 4 2 0
Multiple VRV indoor units or HRV

units can be connected and
controlled in batches, with interlocked operation of HRV and
air conditioners by using the air
conditioner remote control.
The HRV unit can also be operated
independently using the remote
control for the indoor unit, even if
the indoor unit is not in operation
BRC1D52 or
BRC1E52A/B
Note: The VKM uses 2 remote controller addresses per unit.

The number of units that can be group controlled is shown above.
Group 1
Group 1
Operation system
Multiple groups interlocked
(VRV, Sky Air) system
BRC1D52 or
BRC1E52A/B or
BRC301B61
HRV
Indoor unit
Air conditioning interlocked control
Independent operation of HRV is

possible
Operation is possible using 2
remote controls
Multiple HRV units can be
simultaneously controlled in
batch. (Up to 8 HRV units can be
connected)
Air conditioner remote control can
be used
Necessary
Accessories
Group 1
Group 2
Indoor
unit
BRC1D52
BRC1E52A/B
BRC1D52
BRC1E52A/B
Indoor
unit
Indoor
unit
BRC1D52
BRC1E52A/B
KRP2A61
BRC301B61 only available for VAM-FA
Indoor
unit
Group 2
HRV
Group 2
Can control interlocked operation

of multiple
groups of VRV or
Sky Air indoor units
When one of the multiple groups
operates, HRV units are interlocked
and operate simultaneously
BRC1D52 or
BRC1E52A/B
BRC1D52
BRC1E52A/B
HRV
27
Note:
Group control is not possible
between FXMQ-MF and standard
type indoor units. Connect remote
controllers to each unit.
Not all FXMQ-MF functions are
available when using centralised
control. Please refer to your local
installer for detailed information.
The remote control wired to the
FXMQ-MF cannot be set as master
remote control. Otherwise, when
set to auto, the operation mode
will switch according to outdoor
air conditions, regardless of indoor
temperature.
Temperature setting and PPD are
not possible, even when Intelligent
Touch Controller or Intelligent
Manager are installed.
Centralised Control Systems

By combining the (optional) centralised control equipment listed below, the user
can achieve a wide range of comprehensive centralised control systems for air
conditioning and ventilation.
Centralised remote control - DCS302C51
DCS302C51
DCS301B51
A maximum of 64 groups
(128 indoor units, max. 10 outdoor units) can be controlled
A maximum of 128 groups (128 indoor units, max. 10 outdoor units)
can be controlled via 2 centralised remote controls in separate locations
Group control (up and down buttons are added for group selection)
Zone control
Malfunction code display
Max. wiring length 1,000 m (total : 2,000 m)
Combination with unified ON/OFF control, schedule timer and BMS system
Airflow volume and direction can be controlled individually
for indoor units in each group operation.
Ventilation volume and mode can be controlled
for Heat Reclaim Ventilation (VKM).
Up to 4 operation/stop pairs can be set per day
by connecting a schedule timer.
Unified on/off control - DCS301B51

Providing simultaneous and individual control on 16 groups of indoor units
A maximum of 16 groups (128 air conditioning indoor and HRV units)
can be controlled
2 remote controls in separate locations can be used
Centralised control indication
Maximum wiring length of 1,000m (total: 2,000m)
DST301B51
Schedule timer - DST301B51

Enabling 64 groups to be programmed
A maximum of 128 air conditioning indoor and HRV units can be controlled
8 types of weekly schedule
A maximum of 48 hours back-up power supply
Maximum wiring length of 1,000m (total: 2,000m)
Number of HRV units that can be connected per system

2 units
Unified on/off control 8 units
28
Schedule timer 1 unit
SYSTEM
CHARACTERISTICS
SYSTEM CONSTRUCTION (HRV only)
NECESSARY
ACCESSORIES
Unified on/off control DCS301B51
HRV
Indoor unit
BRC1D52
BRC1E52A/B
DCS301B51
DST301B51
BRC1D52
BRC1E52A/B
Up to 8 controllers can be installed

in one centralised transmission
line (in one system), which enables
control of up to 128 groups. (16
groups x 8 = 128 groups)
Schedule timer - DST301B51
One schedule timer can control the
weekly sche-dule of up to 128 units
Indoor unit
Control system can be expanded

depending on its purposes by
combining a variety of centralised
control equipment
BRC1D52
BRC1E52A/B
Centralised Control System
DCS301B51 or
DST301B51,
BRC1D52 or
BRC1E52A/B
If necessary:
DCS302C51
HRV remote control can set

the individual operation of each
HRV unit
HRV
Zone 1
Indoor unit
DCS302C51
HRV
BRC1D52
BRC1E52A/B
BRC1D52
BRC1E52A/B
air conditioners
The centralised remote control

provides settings and monitoring
functions and can control up to
128 VRV and HRV units. A special
adapter is required to connect Sky
Air to the centralised line.
Control is possible in 3 different
patterns: individual, batch or zone
Multiple groups can be controlled
within the same zone
Zone 2
Zone Control System
Centralised remote control DCS302C51
Multiple HRV units can be operated

independently
Indoor unit
HRV
DCS302C51,
BRC1D52 or
BRC1E52A/B
If necessary:
DSC301B51 or
DST301B51
System without air condi-tioning

or HRV remote controls can be
constructed
BRC1D52
BRC1E52A/B
Combination
with
other types of
Air Conditioning Interlocked
Batch /
Individual Control System
One controller can control the on/

off operation of 16 groups of units
collectively or individually
Control system can be expanded

depending on requirements by
combining a variety of centralised
control systems
No-voltage a-contact signal

Adapter
HRV
Air conditioner
BRC1D52
BRC1E52A/B
Connecting line
can be extended
up to 50m
Simultaneous operation of HRVs

and air conditioners is possible via
BRC1D52/ BRC1E52A/B
Use of the HRV remote control
enables to change settings or
operate HRVs independently
Connection
adapter
(no-voltage-acontact-signal)
29
ERQ (pair) AND VRV

AIR HANDLING APPLICATIONS
For small to large commercial spaces Daikin offers a range of R-410A inverter condensing units for use in conjunction with air
handling units. In situations where Daikin commercial range ventilation units cannot satisfy the ventilation requirement due
to building constraints (large atriums, banquet halls etc), air handling units represent the ideal solution.
Air handling units provide large fresh air volumes (> 1,000 m/h) and high ESPs enabling the use of extensive ductwork runs.
For more information on Daikin air handling units refer to the air handling unit catalogue.
Benefits of ERQ and VRV

air handling applications
Outside air = 10C
Fresh air supplied at 21C.

The temperature difference
with the outdoor air is
heated up for free by heat
recovery via A/C system
High efficiency
Daikin heat pumps are renowned for their high energy efficiency with
COPs up to 4.56 in heating1. The VRV range offers both heat pump
and heat recovery units with part load efficiencies as high as 9.02.
Integrating the AHU with a heat recovery system is highly effective
since an office system can frequently be in cooling mode while the
outdoor air is too cold to be brought inside in an unconditioned state.
In this case heat from the offices is merely transferred to heat up the
cold incoming fresh air. In the absence of an AHU this free heating
the incoming fresh air would not be possible.
1 ERQ100AV1 heat pump
2 REYQ8P8 50% cooling 50% heating load. Conditions: outdoor temperature 11CDB, indoor temperature 18CWB, 22CDB
Indoor temperature 22C,

needs cooling because of
solar radiation.
The excessive heat can
be transferred to the AHU
High comfort levels

Daikin ERQ and VRV units respond rapidly to fluctuations in supply air temperature, resulting in a steady indoor temperature
and resultant high comfort levels for the end user.
Easy design and installation

The system is easy to design and install since no additional water systems such as boilers, tanks and gas connections etc are
required. This also reduces the total system cost.
Total solution concept

Integrating an air handling unit into the total building climate system enables both design and installation procedures to
based on a single common technology. This simplifies project follow-up, installation, commissioning and maintenance since
only one party is involved.
31
which system offers me

the best solution?
In order to maximise combination potential, Daikin offers pair and multi combination plus several expansion kits and control
systems. Control box and expansion valve kits are required for each combination with an air handling unit. Both option kits
are designed for indoor and outdoor installation and can be wall mounted.
I only need
a connection to an air handling unit
Outdoor unit combined with indoor units

Expansion valve kit
Air handling unit
A solution for your shop, warehouse, showroom or office.

Control box
ERQ heat pump
ERQ
Inverter controlled units

Large capacity range (from 100 to 250 class)
Heat pump
R-410A
Flexible control possibilities
Wide range of expansion valve kits available
System
Type
Cooling capacity (kW)

Heating capacity (kW)
ERQ-AV1
Air-cooled
ERQ-AW1
10
11.2
14.0
15.5
22.4
28.0
12.5
16.0
18.0
25.0
31.5
I need an air handling unit

and heating, and/or cooling
Air handling unit

Control box
Expansion valve kit

VRV Outdoor unit
Integrate your air handling unit in a Total solution for your shop
or office building.
VRV heat recovery / heat pump

Inverter controlled units
Integrates in all VRV heat recovery
and heat pump systems up to 54 HP
Provides virtually free heating for the air handling unit via
recovered heat from indoor units in cooling1
Control of air temperature
via standard Daikin wired remote control
Large range of expansion valve kits available
1
2
In case of connection to a VRV heat recovery outdoor unit

For more information on VRV units refer to the VRV catalogue
System
Type
Cooling capacity (kW)

Heating capacity (kW)
Heat recovery
Air-cooled VRV
Heat pump
Heat recovery
Water-cooled VRV
Heat pump
32
VRV Indoor unit connected to the same system
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54
11.2 14.0 15.5 22.4 28.0 33.5 40.0 45.0 49.0 55.9 61.5 67.0 71.4 77.0 82.5 89.0 94.0 98.0 105.0 111.0 116.0 120.0 126.0 132.0 138.0 143.0 147.0
12.5 16.0 18.0 25.0 31.5 37.5 45.0 50.0 56.5 62.5 69.0 75.0 81.5 88.0 94.0 102.0 107.0 113.0 119.0 126.0 132.0 138.0 145.0 151.0 158.0 163.0 170.0
System overview
Pair application: ERQ
Air handling unit
Expansion valve kit: EKEXV
F1, F2 communication
Control box:

EKEQDCB: Control Z
EKEQFCB: Control X,Y
DDC controller
(field supplied) Control X
Multi application: VRV
Air handling unit
EKEXV-kit
Control box: EKEQMCB Control Z
Daikin communication wire (F1, F2 communication)

Other communication wire
Liquid pipe
Gas pipe
33
Control possibilities
In order to maximise installation flexibility, 3 types of control systems are offered:
Possibility X (Td/Tr control):
Air temperature control via an external DDC

controller (field supplied)
Room temperature is controlled as a function of the air handling unit
suction or discharge air (customer selection). The DDC controller is
translating the temperature difference between set point and air suction
temperature (or air discharge temperature or room temperature) into a
reference voltage (0-10V) which is transferred to the Daikin control box
(EKEQFCBA). This reference voltage will be used as the main input value
for the compressor frequency control.
Ts
DDC
Possibility Y (Te/Tc control):
By fixed evaporating temperature
TR
Ts
Daikin
control box:
EKEQFCB
Using Daikin wired remote controller

(BRC1D52 or BRC1E52A/B - optional)
Set point can be fixed via standard Daikin wired remote controller.
Remote ON/OFF can be achieved by an optional adapter KRP4A51.
No external DDC controller should be connected. The cooling load
is determined from the air suction temperature and set point on the
Daikin controller.
Ts
Td
Tr
= Air suction temperature

= Air discharge temperature
= Room temperature

Room
Td
Room
ON / OFF
KRP4A51
Ts
Daikin
control box:
EKEQDCB
EKEQMCB
Te = Evaporating temperature
AHU = Air Handling Unit
DDC = Digital Display Controller
Possibility x
Field supplied DDC controller is required
Temperature control using air suction or air discharge temperature
EKEQFCB
Possibility y Using
fixed evaporating temperature,

no set point can be set using remote controller
Possibility z EKEQDCB Using Daikin wired remote controller BRC1D52 or BRC1E51A
EKEQMCB* Temperature control using air suction temperature
34
Td
BRC1D52
BRC1E52A/B
Option kit Features
* EKEQMCB (for multi application)
Te
AHU
TR
A fixed target evaporating temperature of between 3C and 8C can be

set by the customer. In this case, room temperature is only indirectly
controlled. The cooling load is determined from the actual evaporating
temperature (i.e. load to the heat exchanger). A Daikin wired remote
controller (BRC1D52 or BRC1E52A/B - optional) can be connected for
error indication.
Possibility Z (TS/Tr control):
Te
AHU
Daikin
control box:
EKEQFCB
Te
Td
AHU
TR
Room
BRC1D52
BRC1E52A/B
35
Selection of air handling units

Pair application
Step 1: Select required capacity of AHU

Based on the required capacity of the AHU please select the expansion valve
Step 1
Allowed heat exchanger volume (dm )
Allowed heat exchanger capacity in coolong (kW)
Allowed heat exchanger capacity in heating (kW)
EKEXV class
Minimum
Maximum
Minimum
Standard
Maximum
Minimum
Standard
63
1.66
2.08
6.3
7.1
7.8
7.1
8.0
Maximum
8.8
80
2.09
2.64
7.9
9.0
9.9
8.9
10.0
11.1
100
2.65
3.3
10
11.2
12.3
11.2
12.5
13.8
125
3.31
4.12
12.4
14.0
15.4
13.9
16.0
17.3
140
4.13
4.62
15.5
16.0
17.6
17.4
18.0
19.8
200
4.63
6.6
17.7
22.4
24.6
19.9
25.0
27.7
250
6.61
8.25
24.7
28.0
30.8
27.8
31.5
34.7
Heat exchanger capacity is defined under following conditions:

Saturated suction temperature (SST) = 6C, Superheat (SH) = 5K
Subcool condensor (SC) = 3K
Air temperature = 27CDB/19CWB
Eg: If you need 14kW in cooling, you will require an expansion valve of 125class (EKEXV125).
The heat exchanger capacity has priority over the volume of the heat exchanger and is therefore the determining factor for
the selection of the expansion valve. More information on the volume can be found in the data book and service manual.
Step 2: Select outdoor unit

Pair combinations with ERQ outdoor units are possible based on the same principle as standard DX units. The capacity of the
AHU unit is indicated by the capacity of the expansion valve and can be connected as indicated in below table.
Step 2
1~
ERQ
3~
Class 63
Class 80
Class 100
Class 125
Class 140
Class 200
Class 250
EKEXV63
EKEXV80
EKEXV100
EKEXV125
EKEXV140
EKEXV200
EKEXV250
x or y
Control
Expansion valve kit
EKEQFCB
EKEQDCB
OUTDOOR UNIT
Control z
Control box
ERQ100AV1
ERQ125AV1
ERQ140AV1
ERQ125AW1
ERQ200AW1
ERQ250AW1
P: Pair, combination depending on AHU coil volume and capacity
Eg: Based on above selected expansion valve, the EKEXV125 has a capacity of class 125. Therefore we can choose to connect
it in pair with all outdoor units indicated in the table above with P.
Step 3: Control box selection

Please make your selection of the control box based on your requirements. All the different control possibilities are mentioned
on page 34.
More information on the selection is available in the service manual.
36
Multi application
Step 1: Select required capacity of AHU

Based on the required capacity of the AHU please select the expansion valve
Step 1
EKEXV class
Allowed heat exchanger volume (dm3)
Allowed heat exchanger capacity in cooling (kW)
Allowed heat exchanger capacity in heating (kW)
Minimum
Maximum
Minimum
Standard
Maximum
Minimum
Standard
50
0.76
1.65
5.0
5.6
6.2
5.6
6.3
7.0
63
1.66
2.08
6.3
7.1
7.8
7.1
8.0
8.8
80
2.09
2.64
7.9
9.0
9.9
8.9
10.0
11.1
100
2.65
3.3
10
11.2
12.3
11.2
12.5
13.8
6.9
Maximum
125
3.31
4.12
12.4
14.0
15.4
13.9
16.0
17.3
140
4.13
4.62
15.5
16.0
17.6
17.4
18.0
19.8
200
4.63
6.6
17.7
22.4
24.6
19.9
25.0
27.7
250
6.61
8.25
24.7
28.0
30.8
27.8
31.5
34.7
Eg: If the required capacity of the AHU is 6.9kW in cooling, which lies between 6.3 and 7.8, the EKEXV63 can be selected.
The heat exchanger capacity has priority over the volume of the heat exchanger and is therefore the determining factor for
the selection of the expansion valve. More information on the volume can be found in the data book and service manual.
Step 2: Select outdoor unit

Multiple AHU can be connected to a VRV system and the connection principle is similar as for ERQ. Connection of the full
system can be up till 110% including at least 1 Daikin indoor unit (cassette, duct, ) The capacity index of the AHU needs to
be calculated based on the indicated capacity of the selected expansion valve and the actual capacity.
The AHU capacity index = capacity class (expansion valve) * ratio (actual capacity AHU / standard capacity expansion valve)
Eg: AHU has a capacity requirement of 6.9kW and the selected expansion valvue is the EKEXV63 with a standard capacity of
7.1kW. So the AHU capacity = 63 * (6.9kW / 7.1kW) = 61 class
In case that in the system 2 FXSQ50 class are connected, the total sum of capacity would be 61 + 2*50 = 161 class
Based on the 161 class a 10 HP is required as outdoor unit.
1
For detailed specifications of VRV outdoor units, refer to the VRV catalogue or databooks
Step 3: Control box selection

EKEQMCB is the control box which is required to control the communication between the AHU and the VRV system beside
the standard communication of the Daikin DX indoor units (cassette, duct, wall).
More information on the selection is available in the service manual.
37
ERQ
Air handling application (pair)
SPECIFICATIONS
OUTDOOR UNIT
Capacity range
Cooling capacity
Heating capacity
Capacity control
Power input
nom.
nom.
cooling
cooling
heating
min./max.
nom.
nom.
HP
kW
kW
%
kW
kW
Dimensions
Weight
Heat exchanger
Fan
colour
material
unit
unit
rows
fin pitch
face area
stages
fin
type
air flow rate
model
drive
Sound power level cooling
cooling
Sound pressure
level
heating
model
Compressor
type
cooling
Operation range
heating
cooling
Enterning air
temperature on AHU heating
heat exchanger
heightxwidthxdepth
mm
kg
quantity
mm
m
quantity
type
cooling nom.
heating nom.
m/min
m/min
nom.
nom.
nom.
dBA
dBA
dBA
min.~ max.
min.~max.
min.~ max.
min.~max.
CDB
CWB
CDB
CWB
Safety devices
type
charge
control
type
charged volume
liquid
gas
drain
heat insulation
item
Power supply
Refrigerant oil
Piping
connections
ERQ140AV1
6
15.5 (1)
18.0 (2)
3.42 (1)
4.15 (2)
3.94 (2)
Daikin White
Painted galvanized steel plate
1,345x900x320
120
2
2
1.131
60
Non-symmetric waffle louvre
Propeller fan
106
102
105
Brushless DC motor
Direct drive
66
67
69
50
51
53
52
53
55
JT100G-VDL
Hermetically sealed scroll compressor
-5~ 46
-20~15.5
-14CWB~25CWB
4.56 (2)
Fan motor
Refrigerant
ERQ125AV1
5
14.0 (1)
16.0 (2)
24/100
3.99 (1)
EER
COP
Casing
ERQ100AV1
4
11.2 (1)
12.5 (2)
kg
type/OD
type/OD
quantity/OD
l
mm
mm
mm
01/02/03/04
Hz/V
ERQ125AW1
5
14.0 (1)
16.0 (2)
ERQ200AW1
ERQ250AW1
8
10
22.4 (1)
28.0 (1)
25.0 (2)
31.5 (2)
100
3.52 (1)
5.22 (1)
7.42 (1)
4.00 (2)
5.56 (2)
7.70 (2)
3.98 (1)
4.29 (1)
3.77 (1)
4.00 (2)
4.50 (2)
4.09 (2)
Daikin White
Painted galvanized steel plate
1,680x635x765
1,680x930x765
159
187
240
54
2
1.762
2.112
2
Non-symmetric waffle louvre
Propeller fan
95
171
185
95
171
185
Brushless DC motor
72
78
54
57
58
Inverter
Hermetically sealed scroll compressor
-5~ 43
-20~15
35CDB
10CWB~27CWB
10CWB~27CWB
R-410A
4.0
Expansion valve (electronic type)
Daphne FVC68D
1.5
3/26x3
Both liquid and gas pipes
High pressure switch/Fan motor thermal protection/Inverter overload
protector/PC board fuse
1N~/50/220-440
R-410A
7.7
8.4
Synthetic (ether) oil
1.7
2.1
4.3
Braze connection/15.9 Braze connection/19.1 Braze connection/22.2
Both liquid and gas pipes
High pressure switch/Fan motor driver overload protector/Overcurrent relay/
Inverter overload protector/PC board fuse
3N~/50/400
6.2
(1) Cooling: indoor temp. 27CDB, 19CWB; outdoor temp. 35CDB; equivalent piping length: 7.5m (horizontal); level difference: 0m (2) Heating: indoor temp. 20CDB; outdoor temp. 7CDB, 6CWB; equivalent refrigerant piping: 7.5m; level difference: 0m
(3) Sound pressure level is a relative value, depending on the distance and acoustic environment. For more details, please refer to the sound level drawings. (4) Sound values are measured in a semi-anechoic room.
EKEXV
Expansion valve kit
INDOOR UNIT
Casing
Dimensions
Weight
Operation range
Refrigerant
Piping
connections
Power supply
EKEXV50
Colour
Material
Unit
Unit
HeightxWidthxDepth
Cooling
Min.~ Max.
Type
Liquid
Type/OD
Gas
Type/OD
Piping length
System Chargeless
Heat insulation
Phase/Frequency/Voltage
mm
kg
CDB
mm
mm
m
Hz/V
EKEXV63
EKEXV80
EKEXV100
EKEXV125
Ivory white
Metal
401x215x78
2.9
EKEXV140
EKEXV200
EKEXV250
-5.0~ 46.0
R-410A
0
Both inlet and outlet
/-/-
(1) The sound pressure value is the maximum value measured at 10cm from the motor. (2) Minimum and maximum piping length refer to the piping between the expansion valve kit (EKEXV) and the air handling unit (3) Equivalent piping length: refer
to the capacity connection ratio of the outdoor unit; depends on outdoor unit (4) The temperature of the air entering the coil in heating mode can be reduced to -5 CDB. Contact your local dealer for more information.
38
EKEQ
Control box
Indoor unit
Application
Outdoor unit
Casing
Dimensions
Weight
Operation range
Refrigerant
Power supply
EKEQDCB
EKEQFCB
EKEQMCB
Multi
VRV
Pair
ERQ
Colour
Material
HeightxWidthxDepth
Unit
Unit
Cooling
Min.~ Max.
Type
Phase/Frequency/Voltage
mm
kg
CDB
White grey
Resin
132x400x200
3.9
-10~ 40
1~/50/230
3.6
Hz/V
3.6
accessories
ERQ
ERQ100-125AV1
ERQ140AV1
ERQ125AW1
Central drain pan

Central drain plug
ERQ200-250AW1
KWC26B160
KKPJ5F180
Cool/heat selector
KWC26B280
-
KKPJ5F180
KRC19-26A6
Fixing box
KJB111A
Notes
EKEQ
Wiring adapter for electrical appendices (control and monitoring F1 F2)
Remote sensor
EKEQFCB
EKEQDCB
EKEQMCB
BRC1E52A / BRC1D52
BRC1E52A / BRC1D52 1
BRC1E52A / BRC1D52 1
KRP2A61
KRP4A51
KRCS01-1
Notes
(1) Cool/heat selector required for operation
(2) Do not connect the system to DIII-net devices (Intelligent controller, Intelligent Manager, LonWorks interface, BACnet interface).
Caution for options

- Do not connect the system to DIII-net devices (Intelligent Controller, Intelligent Manager, LonWorks interface,
BACnet interface). This could result in malfunction or breakdown of the total system.
- Only use the ERQ, EKEQ, EKEXV in combination with an air handling unit. Do not connect this system to other indoor units.
39
The present leaflet is drawn up by way of information only and does not constitute an offer binding upon
Daikin Europe N.V.. Daikin Europe N.V. has compiled the content of this leaflet to the best of its knowledge.
No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular
purpose of its content and the products and services presented therein. Specifications are subject to change
without prior notice. Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, in
the broadest sense, arising from or related to the use and/or interpretation of this leaflet. All content is
copyrighted by Daikin Europe N.V.
Daikin products are distributed by:
FSC
ECPEN12-203
Naamloze Vennootschap - Zandvoordestraat 300, B-8400 Oostende - Belgium - www.daikin.eu - BE 0412 120 336 - RPR Oostende
ECPEN12-203 CD 05/12 Copyright Daikin

The present publication supersedes ECPEN11-203.
Printed on non-chlorinated paper. Prepared by La Movida, Belgium
Resp. Ed.: Daikin Europe N.V., Zandvoordestraat 300, B-8400 Oostende
Daikins unique position as a manufacturer of air

conditioning equipment, compressors and refrigerants
has led to its close involvement in environmental issues.
For several years Daikin has had the intention to become
a leader in the provision of products that have limited
impact on the environment. This challenge demands
the eco design and development of a wide range
of products and an energy management system,
resulting in energy conservation and a reduction of
waste.

Rekuperator Daikin PDF

Uploaded by

Copyright:

Available Formats

Rekuperator Daikin PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Rekuperator Daikin PDF

Uploaded by

Copyright:

Available Formats

Freshen up

Daikin Europe N.V.

HRV - Heat Reclaim Ventilation

4 High static pressure

Benefits for building owners

1 Energy energy saving ventilation

Benefits for design offices and consultants10

Benefits for installers

1 Simple design and construction

Benefits for end users

1 Create a high quality indoor environment

FXMQ-MF outdoor air processing unit

User friendly control Systems

1 Interlock of the ventilation operation

Overview of control systems

1 Individual Control Systems

ERQ (pair) AND VRV Air Handling Applications31

Which system offers me the best solution? 

1 I only need a connection to an air handling unit

Selection of air handling units

Which system offers me

Heat Reclaim Ventilation

OPTIMISE THE BALANCE BETWEEN INDOOR AND OUTDOOR

recover heat and

Outdoor Air Processing in a single unit

COMBINE FRESH AIR

erq (pair) and VRV air handling applications

OPTIMUM CONTROL OF INDOOR AIR QUALITY

overview ventilation range

Air processing: optimise the balance between

Humidification: optimise the balance

Air flow rate (m3/h)

ERQ AND VRV

Not connectable to VRVIII-S (RXYSQ-PAV, RXYSQ-PAY)

1,000 1,500 2,000

HRV - Heat reclaim ventilation

HRV helps to create a high quality indoor environment

benefits for building owners

Specially developed HEP element

Operation of the high effiency paper.

SA: Supply Air (to room)

RA: Return Air (from room)

Reducing the load on the air conditioning system

Operation automatically switches to the optimum pattern to suit prevailing conditions

Air conditioning in cooling

Air conditioning in heating

Air conditioning off

Air supply fan

Example: Outdoor temp. 30C

Example: Outdoor temp. -5C

The free cooling option reduces the air conditioning energy

Free cooling possible

Example of free cooling during summer

Nighttime free cooling operation

100% free cooling possible

Example of free cooling during intermediate season

Nighttime free cooling operation is an energy saving function

benefits for design offices

Installation under a beam

HRV - Heat Reclaim Ventilation

4 High static pressure

Benefits for building owners

1 Energy energy saving ventilation

Benefits for design offices and consultants10

Benefits for installers

1 Simple design and construction

Benefits for end users

1 Create a high quality indoor environment

FXMQ-MF outdoor air processing unit

User friendly control Systems

Overview of control systems

1 Individual Control Systems

ERQ (pair) AND VRV Air Handling Applications31

Which system offers me the best solution?

1 I only need a connection to an air handling unit

Selection of air handling units