Professional Documents
Culture Documents
Percentage: BOQ 1-17 of 17 - First - Previous - Next - Last
Percentage: BOQ 1-17 of 17 - First - Previous - Next - Last
percentage
| View All
BOQ 1- 17 of 17 | First | Previous | Next | Last |
percentage
S.No. Specification No.
Qty
1. 1
Unit
6000 Sqm
Rate(INR)
Amount(INR)
3.6
(Rupees three and sixty
paise only )
21600
Qty
2. 2
Unit
2000 Cum
Rate(INR)
Amount(INR)
41.4
(Rupees forty one and forty
paise only )
82800
Excavation for roadway in soil by mechanical means (With Dozer) including cutting and pushing the earth to site of
embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements
of lines, grades and cross-sections as per Technical Specification Clause 302.3 MORD / 301 MORTH.
Specification No.
Qty
3. 3
Unit
500 Cum
Rate(INR)
Amount(INR)
146.9
(Rupees one hundred forty
six and ninety paise only )
73450
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m
including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for
finished item of work as per SS - 20 B (APSS 308). - For Ordinary Soil-Manual Means-Up to 3 m depth
Specification No.
Qty
4. 4
Unit
2500 cum
Rate(INR)
Amount(INR)
31.5
(Rupees thirty one and fifty
paise only )
78750
Conveyance charges of Earth - For 1 KM. Note:- 1). Loading charges to be applied for manual loading only. 2).
Unloading/ stacking charges need not be paid for this material.
Specification No.
Qty
5. 5
Unit
1125 Cum
Rate(INR)
Amount(INR)
2045.04
(Rupees two thousand forty
five and four paise only )
2300670
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification as per Table
400.11of MORTH including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of
mixed material to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and
compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading
and maintenance of diversion as per Technical Specification Clause 406 MORD / MORTH. (Material required per Cum
: 45 to 22.4 mm metal -0.396 cum; 22.4mm to 2.36mm metal - 0.528cum; 2.36mm to 75microns metal 0.396Cum)
Specification No.
Qty
6. 6
Unit
480 Cum
Rate(INR)
Amount(INR)
2517.09
(Rupees two thousand five
hundred seventeen and nine
paise only )
1208203.2
Cement Concrete 1:4:8 with 40mm size Crushed Granite metal of approved hard quality including machine mixing
and vibrating with mechanical vibrator finishing to the required camber for CC Pavement sub grade including
necessary side shuttering etc., Complete for finished Item of work as directed ( Excluding Cost of Cement).(CA :
0.90 Cum, FA:0.45Cum)
Specification No.
7. 7
Qty
Unit
4800 Sqm
Rate(INR)
Amount(INR)
13.7
65760
Qty
8. 8
Unit
1200 Cum
Rate(INR)
Amount(INR)
2795.09
(Rupees two thousand seven
hundred ninety five and nine
paise only )
3354108
Cement Concrete M-35 design mix Concrete corresponding to IS 456 using Concrete Mixer using 20mm down size
(65% of 20-10mm and 35% of 10-4.75mm) graded Crushed Granite metal including cost and conveyance of all
materials to site and including machine mixing and vibrating with mechanical vibrators, finishing, and
centering/shuttering charges, etc, (Excluding cost of Cement) for CC Pavements. Cement @ 420Kg/Cum of
concrete is to be used. (CA : 0.90 Cum, FA:0.45Cum) Note:- Cost of steel reinforcement provided if any will be
paid separately including its fabrication charges
Specification No.
Qty
9. 9
Unit
26 Tonne
Rate(INR)
Amount(INR)
8892
(Rupees eight thousand
eight hundred ninety two
only )
231192
Labour charges for cutting, bending and binding reinforcement with contractors binding wire, and placing in
position as directed by Engineer - in - charge including all leads, etc., complete
Specification No.
Qty
10. 10
Unit
130 Cum
Rate(INR)
Amount(INR)
321.2
(Rupees three hundred
twenty one and twenty paise
only )
41756
Supply of Good Gravel ( Note: 1/6th will be deducted for voids from stacks)
Specification No.
Qty
11. 11
Unit
130 Cum
Rate(INR)
Amount(INR)
45.5
(Rupees forty five and fifty
paise only )
5915
Construction of earthen / Gravel shoulders with available material including all lifts, spreading, grading to required
slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 305 MORTH using
machinery like Dozer, water tanker, Three wheel 80-100 kN Static Roller etc.,
Specification No.
Qty
12. 12
Unit
26 Tonne
Rate(INR)
Amount(INR)
178.52
(Rupees one hundred
seventy eight and fifty two
paise only )
4641.52
Conveyance charges of Steel including loading & unloading charges - For 2 KM.
Specification No.
Qty
13. 13
Unit
582 Tonne
Rate(INR)
Amount(INR)
179.32
(Rupees one hundred
seventy nine and thirty two
paise only )
104364.24
Conveyance charges of Cement including loading & unloading charges - For 5 KM.
Specification No.
Qty
14. 14
Unit
1164 KMMT
Rate(INR)
Amount(INR)
7.9
(Rupees seven and ninety
paise only )
9195.6
Conveyance charges of Cement including loading & unloading charges - Beyond 5KM and up to 30 KM
Specification No.
15. 15
Qty
Unit
10 RM
Rate(INR)
357.6
(Rupees three hundred fifty
seven and sixty paise only )
Amount(INR)
3576
Providing expansion joints at every 72M or as directed by the Engineer-in-charge with full depths and width of
expansion shall be 20 to 25mm with a tolerance of + / -1.5mm duly providing dowel bars of Required dia, length
and spacing as per design. Dowel bars shall be covered with plastic sheathing of 0.5length +/- 50mm and the
joints to be filled with polymer based fillers and sealant including cost and conveyance of all materials to work site,
labour charges, etc., complete for finished item of work and as directed by the Engineer-in-charge. (excluding the
cost of dowel bars and their fabrication which will be paid separately) Note: All relevant MORT& H/ IRC codes to be
followed.
Specification No.
Qty
16. 16
Unit
800 RM
Rate(INR)
Amount(INR)
83.5
(Rupees eighty three and
fifty paise only )
66800
Providing longitudinal sawn joints by grooving with mechanical saw to a width of 3 to 5mm and depth of 1/3rd of
thickness of concrete and operation should be carried out as soon as concrete is ready to accept the saw cut
without trowelling including providing tie bars of Required dia, length and spacing as per design. Tie bars shall be
coated with bitumen paint for 75mm on either side. The joints shall be filled with polymer based fillers and sealants
including cost and conveyance of all materials to work site, Labour charges, etc., complete for finished item of work
and as directed by the Engineer-in-charge (excluding the cost of Tie bars and their fabrication required which will
be paid separately). Note: All relevant MORT& H/ IRC codes to be followed.
Specification No.
Qty
17. 17
Unit
1000 RM
Rate(INR)
Amount(INR)
83.9
(Rupees eighty three and
ninety paise only )
83900
Providing contraction sawn joints at every 4.50 m distance or as directed by Engineer In charge by grooving with
mechanical saw, the width of 3 to 5mm and depths 1/3rd to 1/4th of thickness of concrete and operation should be
carried out as soon as concrete is ready to accept the saw cut with out trowelling including providing dowel bars of
Required dia, length and spacing as per design and covered with thin plastic sheathing of 2/3 length. The joint shall
be filled with polymer based fillers and sealants as shown in the drawing and including cost and conveyance of all
materials to work site, Labour charges, etc., complete for finished item of work and as directed by the Engineer-incharge (excluding the cost of dowel bars and their fabrication required which will be paid separately). Note: All
relevant MORT& H/ IRC codes to be followed.
ECV(INR): 7,736,682.00
( Rupees seventy seven lacs thirty six thousand six hundred eighty two only )
Eligibility Criteria
G.O. Nos.
Class Of Contractor
Not applicable
To qualify for award of the contract, each bidder in its name should have in the last 5 years
Not Applicable
Estimated
Quantity
Units
1680
Cum
Minimum
Required Quantity
1680
Possessed :
Rs:7736682
Tender Details
Tender No. : CRP/CVL/RG-III/TN-08/2015-16 Dt.27.05.2015
percentage
| View All
BOQ 1- 35 of 35 | First | Previous | Next | Last |
percentage
S.No. Specification No.
Qty
1. 1
Unit
2500 Sqm
Rate(INR)
Amount(INR)
3.6
(Rupees three and sixty
paise only )
9000
Qty
2. 2
Unit
2000 Cum
Rate(INR)
96.3
(Rupees ninety six and thirty
paise only )
Amount(INR)
192600
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m
including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for
finished item of work as per SS - 20 B (APSS 308). - For Ordinary soils-Mechanical Means-Up to 3 m depth
Specification No.
Qty
3. 3
Unit
450 Cum
Rate(INR)
146.9
(Rupees one hundred forty
six and ninety paise only )
Amount(INR)
66105
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m
including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for
finished item of work as per SS - 20 B (APSS 308). - For Ordinary Soil-Manual Means-Up to 3 m depth
Specification No.
Qty
4. 4
Unit
100 Cum
Rate(INR)
209.9
(Rupees two hundred nine
and ninety paise only )
Amount(INR)
20990
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m
including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for
finished item of work as per SS - 20 B (APSS 308). - For Ordinary rock (not requiring blasting)-Manual Means - For
all Depths
Specification No.
Qty
5. 5
Unit
1200 cum
Rate(INR)
31.5
(Rupees thirty one and fifty
paise only )
Amount(INR)
37800
Conveyance charges of Earth - For 1 KM. Note:- 1). Loading charges to be applied for manual loading only. 2).
Unloading/ stacking charges need not be paid for this material.
Specification No.
6. 6
Qty
Unit
1350 Cum
Rate(INR)
20.9
(Rupees twenty and ninety
paise only )
Amount(INR)
28215
Filling with excavated earth (excluding rock)/ Sand in trenches, sides of foundations and basement with initial lead
in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost
and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc.,
complete for finished item of work. (APSS NO. 309 & 310) (cost of sand is to be paid separately)
Specification No.
Qty
7. 7
Unit
210 Cum
Rate(INR)
2582.19
(Rupees two thousand five
hundred eighty two and
nineteen paise only )
Amount(INR)
542259.9
Cement Concrete 1:4:8 with 40 mm size Crushed Granite metal of approved hard quality in foundations or Plinths
etc., Complete. (But Excluding Cost of Cement) - with concrete mixer (CA : 0.90 Cum, FA:0.45Cum)
Specification No.
Qty
8. 8
Unit
245 Cum
Rate(INR)
2793.89
(Rupees two thousand seven
hundred ninety three and
eighty nine paise only )
Amount(INR)
684503.05
Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm
down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including
cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing
and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of
steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum). Cement @
350Kg/Cum of concrete is to be used - For Floorings / Raft.
Specification No.
Qty
9. 9
Unit
210 Cum
Rate(INR)
5422.09
(Rupees five thousand four
hundred twenty two and
nine paise only )
Amount(INR)
1138638.9
Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm
down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including
cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing
and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of
steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum). Cement @
350Kg/Cum of concrete is to be used - For pedestals. (Effective length of which does not exceed 3 times the least
lateral dimension).
Specification No.
Qty
10. 10
Unit
15 Cum
Rate(INR)
3108.79
(Rupees three thousand one
hundred eight and seventy
nine paise only )
Amount(INR)
46631.85
Reinforced cement concrete grade M 20 Design Mix with 20mm down size (65% of 20-10mm and 35% of 104.75mm) graded crushed granite metal of approved hard quality including machine mixing, vibrating with
necessary shuttering and centering charges, etc., Complete for finished Item of work as directed for Substructure
of CD works i.e, abutments / piers / wing walls / returns / Bed blocks, etc., Up to a height of 5M complete as per
drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 &
2200 MORTH (but excluding cost of steel reinforcement and its fabrication charges and Cost of Cement) Cement @
350Kg/Cum is to be used. (CA : 0.90 Cum, FA:0.45Cum)
Specification No.
Qty
11. 11
Unit
45 Cum
Rate(INR)
4817.89
(Rupees four thousand eight
hundred seventeen and
eighty nine paise only )
Amount(INR)
216805.05
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded crushed
granite metal of approved hard quality for precast RCC slabs, purlins, verandah posts, fencing posts etc. including
machine mixing of Concrete, necessary shuttering, finishing etc including hoisting/fixing, cost and conveyance of all
materials to work site, all labour charges, all operational incidental charges (excluding cost of steel and its
fabrication charges and cost of cement) etc. complete for finished item of work, as directed. (CA : 0.90 Cum,
FA:0.45Cum)
Specification No.
Qty
12. 12
Unit
25 Tonne
Rate(INR)
Amount(INR)
8892
(Rupees eight thousand
eight hundred ninety two
only )
222300
Labour charges for cutting, bending and binding reinforcement with contractors binding wire, and placing in
position as directed by Engineer - in - charge including all leads, etc., complete
Specification No.
13. 13
Qty
Unit
300 Cum
Rate(INR)
2841.29
(Rupees two thousand eight
hundred forty one and
Amount(INR)
852387
Qty
14. 14
Unit
1300 Cum
Rate(INR)
3036.99
(Rupees three thousand
thirty six and ninety nine
paise only )
Amount(INR)
3948087
Cement Concrete 1:3:6 with 40mm down size (50% of 40-20mm, 30% of 20-10mm and 20% of 10-4.75mm)
graded Crushed Granite metal of approved hard quality including machine mixing, vibrating necessary Centering,
shuttering etc., Complete for finished Item of work as directed for Filter Bed Side Walls and Retaining walls
(Excluding Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum)
Specification No.
Qty
15. 15
Unit
85 Cum
Rate(INR)
4277.59
(Rupees four thousand two
hundred seventy seven and
fifty nine paise only )
Amount(INR)
363595.15
Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) of graded crushed granite
metal of approved hard quality for Pedestals including machine mixing, vibrating with mechanical vibrators,
centering/shuttering charges, etc, Complete. (But Excluding Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum)
Specification No.
Qty
16. 16
Unit
1750 RM
Rate(INR)
322.8
(Rupees three hundred
twenty two and eighty paise
only )
Amount(INR)
564900
Supplying, Laying and Jointing of Unplasticised PVC pipes for potable water supply conforming to IS 4985/2000
(Third revision), with bell ends (socket) as per specifications including transportation to site of work and cost of
specials & jointing materials, all taxes and duties, etc., (Test pressure 6 kg/cm2). - For 110 mm Dia
Specification No.
Qty
17. 17
Unit
15 Cum
Rate(INR)
5513.76
(Rupees five thousand five
hundred thirteen and
seventy six paise only )
Amount(INR)
82706.4
Flyash Brick masonry with bricks of size 225x100x60mm with 50kg/cm2 Compressive strength in C.M.1:6 for
superstructure including scaffolding etc., (But Excluding Cost of Cement ) complete.
Specification No.
Qty
18. 18
Unit
90 Sqm
Rate(INR)
95.82
(Rupees ninety five and
eighty two paise only )
Amount(INR)
8623.8
Plastering to brick masonry with cement mortar 1:6, 12mm thick including raking out of joints ( But Excluding Cost
of Cement )
Specification No.
Qty
19. 19
Unit
550 Sqm
Rate(INR)
432.7
(Rupees four hundred thirty
two and seventy paise only )
Amount(INR)
237985
Flooring 100mm thick with CC 1:2:4 using 20mm Down size (65% of 20-10mm and 35% of 10 - 4.75mm) graded
crushed granite metal of approved hard quality on existing concrete base, rendering smooth and including
shuttering charges complete. (But Excluding Cost of Cement )
Specification No.
Qty
20. 20
Unit
275 Sqm
Rate(INR)
221.85
(Rupees two hundred twenty
one and eighty five paise
only )
Amount(INR)
61008.75
Flooring 50 mm thick with CC 1:2:4 using 20mm Down size (65% of 20-10mm and 35% of 10 - 4.75mm) graded
crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. (But
Excluding Cost of Cement )
Specification No.
21. 21
Qty
Unit
115 tonne
Rate(INR)
22800
(Rupees twenty two
Amount(INR)
2622000
Qty
22. 22
Unit
115 tonne
Rate(INR)
20520
(Rupees twenty thousand
five hundred twenty only )
Amount(INR)
2359800
Erecting company's steel stanchions, built up columns, trestles, beams, trusses, N girders, chequered plate walk
way etc., with contractors tackle, derric, crane etc., complete
Specification No.
Qty
23. 23
Unit
11 tonne
Rate(INR)
15675
(Rupees fifteen thousand six
hundred seventy five only )
Amount(INR)
172425
Fabrication of structural steel components like purlins, louvers, sag rods, rafters etc., including all leads and lifts at
site etc., with company's steel sections but with contractor's welding rods, bolts, rivets and all contingencies, power
charges, etc., complete as per drawings and instructions of the Engineer in charge.
Specification No.
Qty
24. 24
Unit
11 tonne
Rate(INR)
14107.5
(Rupees fourteen thousand
one hundred seven and fifty
paise only )
Amount(INR)
155182.5
Erecting company's steel purlins, louvers, sag rods, rafters etc., with contractors tackle, derric, crane etc., complete
Specification No.
Qty
25. 25
Unit
2.1 Metric Tonne
Rate(INR)
51300
(Rupees fifty one thousand
three hundred only )
Amount(INR)
107730
Supply of Structural Steel Angles/Channels /Beams/ Square Bars for the month of March -2015 (Including 14%
CPOH) NOTE:-The rate is for material at site. The Basic rates are inclusive of sales tax
Specification No.
Qty
26. 26
Unit
2100 Kg
Rate(INR)
27.4
(Rupees twenty seven and
forty paise only )
Amount(INR)
57540
Fabrication and erection of compound wall gates, MS fencing posts on ground or on top of compound wall, cattle
trap , MS holding down bolts, templates, in position etc., complete including cost of welding rods, power charges
etc., complete.
Specification No.
Qty
27. 27
Unit
1050 Sqm
Rate(INR)
910.9
(Rupees nine hundred ten
and ninety paise only )
Amount(INR)
956445
Roofing / Side sheeting with 0.5mm thick galvanized/ pre painted G.I. profiled sheets or Galvanised Aluminium
sheets fixed to the purlins with 14 size self drilling screws with neoprene washer including and cost and conveyance
of all materials to site of work, all labour incidental and operational charges etc., complete (with / without Ridges/
Vally gutters) for finished item of work as directed. Side laps are stitched with self tapping / drilling screws. End
laps are to be sealed with 25x3mm Butyl tape. The sheets are provided with anti capillary grove.
Specification No.
Qty
28. 28
Unit
200 Cum
Rate(INR)
106.3
(Rupees one hundred six
and thirty paise only )
Amount(INR)
21260
Labour charges for formation of rock toe wall with Company's Rubble stone with initial lead of 50m and all lifts
including all operational and incidental charges etc., complete as directed by the Engineer-in-charge.
Specification No.
29. 29
Qty
Unit
200 cum
Rate(INR)
12.2
(Rupees twelve and twenty
paise only )
Amount(INR)
2440
Conveyance charges of Metal / Stone - For 2KM Note:- 1). The Basic rate of Material given in chapter 2 includes
Loading charges, 1KM Initial lead. 2). Unloading/ stacking charges need not be paid for this material. However,
Stacking charges for material to be added where stack measurements are to be made eg., WBM road works, pit
material supply, metal filling in outdoor sub stations etc.,
Specification No.
Qty
30. 30
Unit
3000 Sqm
Rate(INR)
Amount(INR)
127
(Rupees one hundred twenty
seven only )
381000
Painting with Synthetic enamel paints of grade II paints to new Iron work, two coats including a base coat of Red
oxide primer paint grade-1 making three coats in all, complete for finished item of work.
Specification No.
Qty
31. 31
Unit
200 Sqm
Rate(INR)
Amount(INR)
26.6
(Rupees twenty six and sixty
paise only )
5320
White washing to New walls with Surya Cem / Equivalent Cem two coats complete for finished item of work.
Specification No.
Qty
32. 32
Unit
400 Sqm
Rate(INR)
Amount(INR)
29.1
(Rupees twenty nine and ten
paise only )
11640
Colour washing to new walls with Surya Cem / Equivalent Cem, adding required colour two coats complete for
finished Item of work.
Specification No.
Qty
33. 33
Unit
610 Tonne
Rate(INR)
Amount(INR)
179.32
(Rupees one hundred
seventy nine and thirty two
paise only )
109385.2
Conveyance charges of Cement including loading & unloading charges - For 5 KM.
Specification No.
Qty
34. 34
Unit
1220 KMMT
Rate(INR)
Amount(INR)
7.9
(Rupees seven and ninety
paise only )
9638
Conveyance charges of Cement including loading & unloading charges - Beyond 5KM and up to 30 KM
Specification No.
Qty
35. 35
Unit
151 Tonne
Rate(INR)
Amount(INR)
178.52
(Rupees one hundred
seventy eight and fifty two
paise only )
26956.52
Conveyance charges of Steel including loading & unloading charges - For 2 KM.
ECV(INR): 16,323,905.00
( Rupees one crore sixty three lacs twenty three thousand nine hundred five only )
Eligibility Criteria
G.O. Nos.
Class Of Contractor
Not applicable
To qualify for award of the contract, each bidder in its name should have in the last 5 years
Item
Estimated
Quantity
Units
Minimum Required
Quantity
Not Applicable
Rs:16323905
2410
Cum
1650
Tender Details
Tender No. : SE/R&B/ADB/06/2015-16, Dt: 25.05.2015
percentage
S.No. Specification No.
1.
Qty
MoRT&H specification
301(5th Revision)
Unit
1546 1 Cum
Rate(INR)
65.4
(Rupees sixty five and forty
paise only )
Amount(INR)
101108
Removal of unserviceable soils up to SDR including excavation, loading and disposal up to 1000 m etc., complete
including (excluding seigniorage) charges for finished item of work as per MoRT&H specification 301(5th Revision)
and as directed by the Engineer-in-Charge
Specification No.
Qty
MoRT&H specification
2. 1500,1700, 2100 (5th
Revision)
Unit
189 1 Cum
Rate(INR)
5001
(Rupees five thousand one
only )
Amount(INR)
945189
Providing Plain Cement Concrete (1:3:6) mix using 40mm size HBT crushed stone aggregate and fine aggregate
conforming to table 1000-2 of MoRT&H including cost and conveyance of all materials to site and labour charges,
centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all
T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as
directed by the Engineer-in-Charge for base coarse
Specification No.
Qty
MoRT&H specification
3. 1500,1700, 2200 (5th
Revision)
Unit
334 1 Cum
Rate(INR)
5387
(Rupees five thousand three
hundred eighty seven only )
Amount(INR)
1799258
Providing Vibrated Cement Concrete ( 1:3:6 ) using 40mm size HBT crushed stone aggregate and fine aggregate
conforming to table 1000-2 of MoRT&H including cost, (excluding seigniorage) conveyance of all materials to site
and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and
operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700,
2200 (5th Revision) and as directed by the Engineer-in-Charge for body walls
Specification No.
4.
Qty
As directed by the
engineer-in-charge
Unit
1125 1 Sqm
Rate(INR)
119
(Rupees one hundred
nineteen only )
Amount(INR)
133875
Plastering in CM (1:4) 12 mm thick including cost and conveyance of all materials , seigniorage charges , labour
charges , curing etc. complete for finished item of work as directed by the Engineer -in-Charge
Specification No.
Qty
MoRT&H specification
5. 1500,1600,1700 & 2200
(5th revision )
Unit
70 1 Cum
Rate(INR)
6337
(Rupees six thousand three
hundred thirty seven only )
Amount(INR)
443590
Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBT crushed stone aggregate (Coarse
aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and
conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc.,
including other incidental hire and operational charges of all T&P as per approved drawings and as directed during
execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification
1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for Cover slabs over Side drains
Specification No.
MoRT&H specification
6. 1600 & 2200, 2300 (5th
revision)
Qty
Unit
4.2 1 MT
Rate(INR)
56892
(Rupees fifty six thousand
eight hundred ninety two
only )
Amount(INR)
238946
Providing HYSD bars ( Fe-415 ) of different diameters, wrought and put up bars of all diameters including cost and
conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending,
binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and
all handling charges and operational charges etc., and including over lapping welding if required etc., complete for
all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge
and as per MoRT&H specification 1600 & 2200, 2300 (5th revision) and as per I.S.1786 of 1985 for Super structure
of R.C.C items.
ECV(INR): 3,661,966.00
( Rupees thirty six lacs sixty one thousand nine hundred sixty six only )
Tender Details
Tender No. : T.No.2-17/TSMSIDC/2015-16, dt.29.04.2015
Eligibility Criteria
G.O. Nos.
Class Of Contractor
II Class
II Class
III Class
III Class
To qualify for award of the contract, each bidder in its name should have in the last 5 years
Item
Estimated
Quantity
Units
Minimum Required
Quantity
259
ONE
CUM
170
400
ONE
CUM
200
120
ONE
CUM
60
Capacity
Quantity Required
Steel centring
300 SQM
300
Pin vibrators
1 NO
1 NO
C.C mixers
1 NO
1 No
Qualification
Minimum
Experience
Number of
Persons
Rs:1777000
Rs:5331008
Tender Details
Tender No. : T.No.2-17/TSMSIDC/2015-16, dt.29.04.2015
percentage
| View All
BOQ 1- 50 of 145 | First | Previous | Next | Last |
percentage
S.No. Specification No.
Qty
1. APSS 308
Unit
Rate(INR)
122
(Rupees one hundred twenty
two only )
Amount(INR)
31598
Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary
soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308).
Specification No.
Qty
2. APSS NO.309&310
Unit
331 ONE CUM
Rate(INR)
463
(Rupees four hundred sixty
three only )
Amount(INR)
153253
Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding
15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental,
labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS
NO.309&310)
Specification No.
Qty
3. APSS NO.309&310
Unit
Rate(INR)
185
(Rupees one hundred eighty
five only )
Amount(INR)
38295
Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations
and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and
conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and
overheads & contractors profit complete for fnished item of work (APSS NO.309&310)
Specification No.
Qty
Unit
18 ONE CUM
Rate(INR)
3995
(Rupees three thousand nine
hundred ninety five only )
Amount(INR)
71910
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed
using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and
conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on
all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed,
ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
Specification No.
5. APSS No. 402
Qty
Unit
45.2 ONE CUM
Rate(INR)
3764
(Rupees three thousand
seven hundred sixty four
only )
Amount(INR)
170133
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring
bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and
conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all
materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed,
ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
Specification No.
Qty
Unit
57 ONE CUM
Rate(INR)
2890
(Rupees two thousand eight
hundred ninety only )
Amount(INR)
164730
Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from
approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from
approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and
shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished
item of work in foundation and basement. (APSS No. 601 & 615)
Specification No.
Qty
Unit
38.4 ONE CUM
Rate(INR)
8357
(Rupees eight thousand
three hundred fifty seven
only )
Amount(INR)
320909
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot
plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh
batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding
cost of steel and its fabrication charges for finished item of work (APSS No. 402) Footings
Specification No.
Qty
Unit
6 ONE CUM
Rate(INR)
8701
(Rupees eight thousand
seven hundred one only )
Amount(INR)
52206
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot
plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh
batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding
cost of steel and its fabrication charges for finished item of work (APSS No. 402) Column pedestals
Specification No.
Qty
Unit
20.1 ONE CUM
Rate(INR)
10280
(Rupees ten thousand two
hundred eighty only )
Amount(INR)
206628
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot
plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh
batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding
cost of steel and its fabrication charges for finished item of work (APSS No. 402) Plinth Beams
Specification No.
Qty
Unit
16 ONE CUM
Rate(INR)
9551
(Rupees nine thousand five
hundred fifty one only )
Amount(INR)
152816
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc., including all operational, incidental and labour charges such as weigh batching,
machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete
but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) COLUMNS : un
supported height up to 3.66 m First Floor
Specification No.
11. APSS No. 402
Qty
Unit
Rate(INR)
9898
(Rupees nine thousand eight
hundred ninety eight only )
Amount(INR)
12867
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc., including all operational, incidental and labour charges such as weigh batching,
machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete
but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) COLUMNS : un
supported height up to 3.66 m Second Floor
Specification No.
Qty
Unit
2 ONE CUM
Rate(INR)
9741
(Rupees nine thousand
seven hundred forty one
only )
Amount(INR)
19482
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc., including all operational, incidental and labour charges such as weigh batching,
machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete
but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) LINTELS : First Floor
Specification No.
Qty
Unit
0.2 ONE CUM
Rate(INR)
10045
(Rupees ten thousand forty
five only )
Amount(INR)
2009
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc., including all operational, incidental and labour charges such as weigh batching,
machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete
but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) LINTELS : Second
Floor
Specification No.
Qty
Unit
19 ONE CUM
Rate(INR)
8878
(Rupees eight thousand
eight hundred seventy eight
only )
Amount(INR)
168682
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials , centering using Casurina Ballies , Bamboos , Wooden Reapers ,
Runners , Wood Posts , Wall Plates etc., including all operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc.,
complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) BEAMS :
un supported height up to 3.66 m First Floor
Specification No.
Qty
Unit
64 ONE SQM
Rate(INR)
1078
(Rupees one thousand
seventy eight only )
Amount(INR)
68992
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials , centering using Casurina Ballies , Bamboos , Wooden Reapers ,
Runners , Wood Posts , Wall Plates etc., including all operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc.,
complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Roof Slabs
125mm thick : un supported height up to 3.66 m First Floor
Specification No.
16. APSS No. 402
Qty
Unit
241 ONE SQM
Rate(INR)
1231
(Rupees one thousand two
hundred thirty one only )
Amount(INR)
296671
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials , centering using Casurina Ballies , Bamboos , Wooden Reapers ,
Runners , Wood Posts , Wall Plates etc., including all operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc.,
complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Roof Slabs
150mm thick : First Floor
Specification No.
Qty
Unit
29 ONE RM
Rate(INR)
426
(Rupees four hundred
twenty six only )
Amount(INR)
12354
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and including sales & other taxes on all materials , centering using Casurina Ballies , Bamboos , Wooden
Reapers , Runners , Wood Posts , Wall Plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm
thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such
as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors
profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402,
403 & 903) First Floor
Specification No.
Qty
Unit
Rate(INR)
3.3 ONE RM
439
(Rupees four hundred thirty
nine only )
Amount(INR)
1449
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content
of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and including sales & other taxes on all materials , centering using Casurina Ballies , Bamboos , Wooden
Reapers , Runners , Wood Posts , Wall Plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm
thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such
as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors
profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402,
403 & 903) Second Floor
Specification No.
Qty
Unit
Rate(INR)
4857
(Rupees four thousand eight
hundred fifty seven only )
Amount(INR)
78198
Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common
burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from
approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials
like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as
labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and
overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504). Up to basement (For
steps & ramp, sump & septic tank walls)
Specification No.
Qty
Unit
Rate(INR)
5197
(Rupees five thousand one
hundred ninety seven only )
Amount(INR)
267646
Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common
burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from
approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials
like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as
labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and
overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504). Superstructure : First
Floor
Specification No.
21. APSS No. 501 & 504
Qty
Unit
7.8 ONE CUM
Rate(INR)
5414
(Rupees five thousand four
hundred fourteen only )
Amount(INR)
42229
Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common
burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from
approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials
like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as
labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and
overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504). Superstructure : Second
Floor
Specification No.
Qty
Unit
98 ONE SQM
Rate(INR)
679
(Rupees six hundred
seventy nine only )
Amount(INR)
66542
Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Screened sand) using
common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7
cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain
rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where
applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site,
including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing
cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 &
509) Internal walls : First Floor
Specification No.
Qty
Unit
55 ONE SQM
Rate(INR)
721
(Rupees seven hundred
twenty one only )
Amount(INR)
39655
Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Screened sand) using
common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7
cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain
rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where
applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site,
including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing
cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 &
509) Internal walls : Second Floor
Specification No.
Qty
Unit
1.1 ONE CUM
Rate(INR)
5101
(Rupees five thousand one
hundred one only )
Amount(INR)
5611
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including sales
& other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for Bed Blocks & Hold Fasts for finished item of work. (APSS No. 402)
First Floor
Specification No.
Qty
Unit
Rate(INR)
5178
(Rupees five thousand one
hundred seventy eight only )
Amount(INR)
1036
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including sales
& other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for Bed Blocks & Hold Fasts for finished item of work. (APSS No. 402)
Second Floor
Specification No.
Qty
Unit
Rate(INR)
6227
(Rupees six thousand two
hundred twenty seven only )
Amount(INR)
4982
Plain Cement Concrete M 20 design mix using WEIGH BATCHER / MIXER, 20mm size hard granite machine crushed
graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like
cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering, shuttering, machine
mixing, lift charges, laying concrete,vibrating, curing, overheads & contrctors profit etc., complete for finished item
of work (APSS No. 402 & 403) for steps First Floor
Specification No.
27. APSS No. 402 & 403
Qty
Unit
0.4 ONE CUM
Rate(INR)
6265
(Rupees six thousand two
hundred sixty five only )
Amount(INR)
2506
Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of
350 kgs. of cement per 1 cum of concrete using WEIGH BATCHER / MIXER including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering,
shuttering, machine mixing, laying concrete, lift charges, curing etc., and overheads & contractors profit complete
for finished item of work (APSS No. 402 & 403) for sill slabs. First Floor
Specification No.
Qty
Unit
4 ONE SQM
Rate(INR)
439
(Rupees four hundred thirty
nine only )
Amount(INR)
1756
Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of
350 kgs. of cement per 1 cum of concrete using WEIGH BATCHER / MIXER including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering,
shuttering, labour charges such as weigh batching, machine mixing, laying concrete, lift charges, curing etc., and
overheads & contractors profit complete for finished item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms : First Floor
Specification No.
Qty
Unit
4 ONE SQM
Rate(INR)
220
(Rupees two hundred twenty
only )
Amount(INR)
880
Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of
350 kgs. of cement per 1 cum of concrete using WEIGH BATCHER / MIXER including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering,
shuttering, labour charges such as weigh batching, machine mixing, laying concrete, lift charges, curing etc., and
overheads & contractors profit complete for finished item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves : First Floor
Specification No.
Qty
Unit
14 ONE MT
Rate(INR)
61188
(Rupees sixty one thousand
one hundred eighty eight
only )
Amount(INR)
856632
Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC
works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position
with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming
grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying
including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item
of work.( APSS No.126) First Floor
Specification No.
Qty
Unit
0.24 ONE MT
Rate(INR)
61831
(Rupees sixty one thousand
eight hundred thirty one
only )
Amount(INR)
14839
Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC
works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position
with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming
grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying
including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item
of work.( APSS No.126) Second Floor
Specification No.
Qty
Unit
0.35 ONE MT
Rate(INR)
62385
(Rupees sixty two thousand
three hundred eighty five
only )
Amount(INR)
21835
Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour charges for
straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved
materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as
per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as
overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all
incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other
taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126)
First Floor
Specification No.
Qty
Unit
Rate(INR)
Amount(INR)
0.2 ONE MT
63028
(Rupees sixty three
thousand twenty eight only )
12606
Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour charges for
straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved
materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as
per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as
overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all
incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other
taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126)
Second Floor
Specification No.
Qty
Unit
293 ONE SQM
Rate(INR)
131
(Rupees one hundred thirty
one only )
Amount(INR)
38383
Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and
conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and
all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing,
curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of
work.(SS 901,903 & 904) First Floor
Specification No.
Qty
Unit
Rate(INR)
281
(Rupees two hundred eighty
one only )
Amount(INR)
104532
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of
4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement,
sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on
materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for
finished item of work. (SS 901,903 & 904) First Floor
Specification No.
Qty
Unit
36 ONE SQM
Rate(INR)
305
(Rupees three hundred five
only )
Amount(INR)
10980
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of
4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement,
sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on
materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for
finished item of work. (SS 901,903 & 904) Second Floor
Specification No.
Qty
Unit
247 ONE SQM
Rate(INR)
304
(Rupees three hundred four
only )
Amount(INR)
75088
Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of
4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement,
sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on
materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for
finished item of work .(SS 901,903 & 904) First Floor
Specification No.
Qty
Unit
259 ONE SQM
Rate(INR)
304
(Rupees three hundred four
only )
Amount(INR)
78736
Plastering 20mm thick in two coats for weather exposed exterior walls using screened sand with base coat of
16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and
all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS 901,903 & 904) First Floor
Specification No.
39. SS 901,903 & 904
Qty
Unit
181 ONE SQM
Rate(INR)
329
(Rupees three hundred
twenty nine only )
Amount(INR)
59549
Plastering 20mm thick in two coats for weather exposed exterior walls using screened sand with base coat of
16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and
all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS 901,903 & 904) Second Floor
Specification No.
Qty
Unit
67 ONE SQM
Rate(INR)
178
(Rupees one hundred
seventy eight only )
Amount(INR)
11926
Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials
like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental
charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by
Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
for basement :
Specification No.
Qty
Unit
340 ONE SQM
Rate(INR)
335
(Rupees three hundred
thirty five only )
Amount(INR)
113900
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened
sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as
approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished
smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and
conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including sales & other
taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges,
rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads &
contractors profit complete for finished item of work. (APSS No. 901 & 903). First Floor
Specification No.
Qty
Unit
10 ONE SQM
Rate(INR)
1139
(Rupees one thousand one
hundred thirty nine only )
Amount(INR)
11390
RCM facia 50mm thick using screened sand for drop walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge finishing,including cost and conveyance of all materials to
site, sales & othertaxes on all materials,operationals &incidental,cost and conveyance of cement,wire mesh,water to
work site,centering,scaffolding and form work,lift charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its fabrication charges for finished item of work(APSS
NO.403&903) First Floor
Specification No.
Qty
Unit
125 ONE SQM
Rate(INR)
604
(Rupees six hundred four
only )
Amount(INR)
75500
Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.457m or any other size
as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof
slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat
cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc.
complete including sales & other taxes on all materials including all labour charges like dressing of flooring stones
to the required size, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and
overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) First Floor
Specification No.
Qty
Unit
8 ONE SQM
Rate(INR)
872
(Rupees eight hundred
seventy two only )
Amount(INR)
6976
Flooring with ceramic tiles 7.30mm thick , 1st quality and of size not less than 300mm x 300mm as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed
already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm &
jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all
materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished
item of work (in toilets). (APSS No.701 & 707) First Floor
Specification No.
45. APSS No.701 & 707
Qty
Unit
131 ONE SQM
Rate(INR)
1086
(Rupees one thousand
eighty six only )
Amount(INR)
142266
Flooring with vitrified polished floor tiles of 1st quality and make as approved by Engineer-in-charge of size not less
than 598 mm x 598 mm , 8mm thickness regular finish and normal colours with borders and design as per the
approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over
a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white
cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials
like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat
and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- incharge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) First Floor
Specification No.
Qty
46. NA
Unit
30 ONE SQM
Rate(INR)
685
(Rupees six hundred eighty
five only )
Amount(INR)
20550
Flooring with chequered terrazo tiles of 30mm thick (dark shade) of size 0.305m x 0.305m set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab including neat
cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth
mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water and
tiles etc.,and overheads & contractors profit complete for finished item of work. First Floor
Specification No.
Qty
Unit
18 ONE SQM
Rate(INR)
667
(Rupees six hundred sixty
seven only )
Amount(INR)
12006
Providing polished shahabad / Tandur stone slabs of 15mm to 18mm thick in single piece as specified set over a
base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat
cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth
including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including
sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size,
flat nosing the edges, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and
overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701)
Treads of 0.30m wide : First Floor
Specification No.
Qty
Unit
Rate(INR)
625
(Rupees six hundred twenty
five only )
Amount(INR)
5813
Providing polished shahabad / Tandur stone slabs of 15mm to 18mm thick in single piece as specified set over a
base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat
cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth
including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including
sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size,
flat nosing the edges, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and
overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701) Risers
of 0.15m height : First Floor
Specification No.
Qty
Unit
94 ONE RM
Rate(INR)
62
(Rupees sixty two only )
Amount(INR)
5828
Providing skirting to internal walls to 10.00 cm height with Polished Shahabad/Tandur stone slabs 15mm to 18mm
thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed
with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,
complete and overheads & contractors profit complete for finished item of work.(APSS No.701 &707) First Floor
Specification No.
50. APSS No.701 &707
Qty
Unit
83 ONE RM
Rate(INR)
90
(Rupees ninety only )
Amount(INR)
7470
Providing skirting to internal walls to 10 cm height with vitrified tiles 8mm thick , regular finish and normal colour,
length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and
overheads & contractors profit complete for finished item of work.(APSS No.701 &707) First Floor
ECV(INR): 5,331,008.00
( Rupees fifty three lacs thirty one thousand eight only )
Tender Details
Tender No. : NIT No. SE/R&B/ADB/ 05/2015-16 Dt: 25.05.2015
Periodical Repairs to Jamgaon - Chapral road from
Name of Work :
Km 0/0 to 3/8 in Adilabad District. (5th call)
percentage
1.
| View All
BOQ 1- 6 of 6 | First | Previous | Next | Last |
percentage
S.No. Specification No.
Qty
MoRT&H Specification
305.4.3 (5th Revision)
Unit
2432 1 Sqm
Rate(INR)
7.8
(Rupees seven and eighty
paise only )
Amount(INR)
18970
Scarifying the existing B.T surface to a depth of 50 mm by Mechanical means and disposal of scarified material with
all leads and lifts upto 1000 Mtrs as per MoRT&H (5th Revision) Specn. No.305.4.3
Specification No.
2.
Qty
MoRT&H Specification
406 (5th Revision)
Unit
365 1 Cum
Rate(INR)
2391
(Rupees two thousand three
hundred ninety one only )
Amount(INR)
872715
Providing, Laying, Spreading and compacting graded HBT crushed stone aggregate to Wet Mix Macadem
specification including cost of all materials and including premixing the material with water at OMC in Mechanical
mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well
prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the
Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work)
Specification No.
3.
Qty
MoRT&H Specification
502 (5th revision)
Unit
2432 1 Sqm
Rate(INR)
31.8
(Rupees thirty one and
eighty paise only )
Amount(INR)
77338
Providing and applying Prime coat with bitumen emulsion (Medium setting) bulk using emulsion pressure distributor
on prepared surface of Granular base including cleaning of road surface and spraying emulsion at the rate of 0.70
Kg/sqm using emulsion pressure distributor for finished item of work as per MoRT&H specification 502 (5th
Revision) and as directed by the Engineer - in charge.
Specification No.
4.
MoRT&H Specification
503 (5th revision)
Qty
Unit
11982 1 Sqm
Rate(INR)
10.6
(Rupees ten and sixty paise
only )
Amount(INR)
127009
Providing and applying tack coat with bitumen VG-10 grade (Bulk) using bitumen pressure distributor at the rate of
0.20 kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of
work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
Specification No.
5.
Qty
MoRT&H Specification
505 (5th Revision)
Unit
360 1 Cum
Rate(INR)
8884
(Rupees eight thousand
eight hundred eighty four
only )
Amount(INR)
3198240
Providing 30mm thick compacted Bituminous Concrete with 100-120 TPH batch type hot mix plant/ 40-60 TPH hot
mix plant using HBT crushed aggregates of Grading 2 as per table 500-17 of specification 507 of MoRT&H (5th
revision), premixed with bitumen VG-30 grade @ 5.4% of mix and filler, transporting the hot mix to work site,
laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled,
vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th revision)
complete for finished item of work in all respects as directed by Engineer-in-Charge
Specification No.
6. MoRT&H Specification
507 (5th Revision)
Qty
Unit
1654 1 Cum
Rate(INR)
167
(Rupees one hundred sixty
Amount(INR)
276218
seven only )
Construction of earthen shoulders with selective soils obtained from borrowed area with 5 km leads with MDD of
17.5 KN/Cum from approved sources, sectioning, grading and consolidation with 8 to 10 Tonnes vibratory road
roller @ OMC to meet requirement of table 300-2of MORT&H including all hire and operational charges of T&P ,
complete for finished item of work as per MORT&H specification 305 (5th revision) (Payment will be made based on
levels for finished item of work)
ECV(INR): 4,570,490.00
( Rupees forty five lacs seventy thousand four hundred ninety only )
Tender Details
Tender No. :
Name of Work :
percentage
| View All
BOQ 1- 30 of 30 | First | Previous | Next | Last |
percentage
S.No. Specification No.
Qty
1. MoRT&Hspecflcation 304
Unit
1118 1cum
Rate(INR)
Amount(INR)
30.8
(Rupees thirty and eighty
paise only )
34434
Bridge Proper (5V of 10M eff. span without Foot Paths): Earth work in excavation of foundation of structures as per
drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps
and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per MORTH
specification no.304 ln ordinary soils upto SDR soils using machinery Depth up to 3M (excluding dewatering)
Specification No.
Qty
2. MoRT&Hspecflcation 304
Unit
283 1cum
Rate(INR)
Amount(INR)
34.3
(Rupees thirty four and
thirty paise only )
9707
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting
out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and
bottom and backfilling with approved material as per MORTH specification no.304 ln ordinary soils upto SDR soils
using machinery. 3M to 6M depth (including dewatering)
Specification No.
3.
Qty
MORTH specification no
2100
Unit
40 1cum
Rate(INR)
Amount(INR)
5887
(Rupees five thousand eight
hundred eighty seven only )
235480
PCC (1:3:6) nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed,
Placed in foundation and compacted by vibration including curing complete as per MORT&H spn.no.2100
Specification No.
4.
Qty
MORT&H specification
Nos.1500, 1700 & 2100
Unit
599 1cum
Rate(INR)
Amount(INR)
6756
(Rupees six thousand seven
hundred fifty six only )
4046844
Vibrated cement concrete in Open foundation complete as per Drawing and technical specificationsas per MORT&H
specification Nos 1500 1700 & 2100 VCC M-15. Footings of Abutments, Piers & Wing walls
Specification No.
5.
Qty
MoRT&H SpeCification
1500,1700 & 2200
Unit
543 1cum
Rate(INR)
Amount(INR)
7146
(Rupees seven thousand one
hundred forty six only )
3880278
Vibrated cement concrete in Substructure complete as per Drawing and technical specifications as per MORT&H
specification Nos.1500, 1700 & 2200 VCC M-15- sub structure of Abutments, Piers & Wing walls
Specification No.
6.
Qty
MoRT&H SpeCification
1500,1700&2200
Unit
5 1cum
Rate(INR)
Amount(INR)
8033
(Rupees eight thousand
thirty three only )
40165
Vibrated Reinforced cement concrete in Sub structure complete as per Drawing and technical specifications as per
MORT&H specification Nos 1500 1700 & 2200 VRCC M-20- Substructure Bed blocks & backing walls Height up to
5m
Specification No.
7. MoRT&H SpeCification
Qty
Unit
19 1cum
Rate(INR)
Amount(INR)
8325
158175
1500,1700&2200
Vibrated Reinforced cement concrete in Sub structure complete as per Drawing and technical specifications as per
MORT&H specification Nos 1500 1700 & 2200 VRCC M-20- Substructure Bed blocks & backing walls Height 5m to
10m
Specification No.
8.
Qty
MoRT&H SpeCification
1500,1600 & 1700
Unit
532 1cum
Rate(INR)
9379
(Rupees nine thousand three
hundred seventy nine only )
Amount(INR)
4989628
Furnishing and placing reinforced cement concrete VRCC M30 super structure as per Drawing and technical
specifications as per MORT&H specification Nos 1500, 1600 & 1700 and as per M.O T DRG No SD/114 excluding
cost of steel and fabrication charges Kerbs over wings
Specification No.
9.
Qty
MORT&H specification
Nos 1500, 1600 & 1700
Unit
3 1cum
Rate(INR)
Amount(INR)
7972
(Rupees seven thousand
nine hundred seventy two
only )
23916
Furnishing and placing reinforced cement concrete VRCC M30 super structure as per Drawing and technical
specifications as per MORT&H specification Nos 1500, 1600 & 1700 and as per M.O T DRG No SD/114 excluding
cost of steel and fabrication charges Height up to 5m
Specification No.
10.
Qty
MORT&H specification
Nos 1500, 1700 & 2200
Unit
120 1Rm
Rate(INR)
914
(Rupees nine hundred
fourteen only )
Amount(INR)
109680
Vibrated Reinforced cement concrete in Super structure complete as per Drawing and technical specifications as per
MORT&H specification nos 809, 1500, 1700 & 2200 VRCC M-35-For Crash Barrier excluding cost of steel and its
fabrication charges as per approved drawing R&B/D&P/ROB's/RCC/PPT/18/2010, Dt:29-09-2010
Specification No.
11.
Qty
MoRT&H SpeCification
2700
Unit
11 1cum
Rate(INR)
Amount(INR)
6496
(Rupees six thousand four
hundred ninety six only )
71456
PCC M15 Grade LEVELLING COURSE below approach slab complete as per drawing and technical specifications as
per MoRT&H Specification No 2700
Specification No.
12.
Qty
MoRT&H Specification
1500,1700, & 2100
Unit
29 1cum
Rate(INR)
7944
(Rupees seven thousand
nine hundred forty four
only )
Amount(INR)
230376
Reinforced cement concrete approach slab excluding reinforcement and complete as per drawing and technical
specifications as per drg no. SD 102 & 104 and as per MoRT&H Specification 1500,1700, & 2100 - M-30 grade
Specification No.
13.
Qty
MoRT&H Specification
1500,1600, 1700&2702
Unit
41 1cum
Rate(INR)
7874
(Rupees seven thousand
eight hundred seventy four
only )
Amount(INR)
322834
Providing and laying cement concrete wearing coat M 30 grade excluding reinforcement and fabrication charges
complete as per drawing and technical specifications as per M.O.T. Drg No SD.101 as per MoRT&H Specification
1500,1600, 1700 & 2702.
Specification No.
14.
Qty
Unit
45.6 1 MT
Rate(INR)
64913
(Rupees sixty four thousand
nine hundred thirteen only )
Amount(INR)
2960033
Supplying,fitting and placing uncoated HYSD bar reinforcement in super structure complete as per drawing and
technical specifications as per MoRTH specification No 1600 & 2200 Super structure.
Specification No.
15.
MoRTH specification1600
&2200
Qty
Unit
8.9 1 MT
Rate(INR)
63657
(Rupees sixty three
thousand six hundred fifty
seven only )
Amount(INR)
566547
Supplying,fitting and placing uncoated HYSD bar reinforcement in Sub structure complete as per drawing and
technical specifications as per MoRTH specification No 1600 & 2200 Sub structure.
Specification No.
16.
Qty
MoRTH
specification1600& 2200
Unit
5.6 1 MT
Rate(INR)
Amount(INR)
63489
(Rupees sixty three
thousand four hundred
eighty nine only )
355538
Supplying,fitting and placing uncoated HYSD bar reinforcement in Foundations complete as per drawing and
technical specifications as per MoRTH specification No 1600 & 2200 Foundations.
Specification No.
17.
Qty
MoRT&H specification
2504
Unit
32 1cum
Rate(INR)
Amount(INR)
2653
(Rupees two thousand six
hundred fifty three only )
84896
Providing Grouted rough stone Revetment 300mm thick with 300mm size rough stone grouted with 0.20 cum of CC
(1:4:8) mix using 40mm size HBT metal/chips (SS5) graded including cost , conveyance of all materials to site and
labour charges, Curing etc.,complete as per MoRT&H specification 2504 for revetment
Specification No.
18.
Qty
MoRT&H specification
2504
Unit
12 1cum
Rate(INR)
Amount(INR)
1782
(Rupees one thousand seven
hundred eighty two only )
21384
Providing rough stone revetment 300mm thick using 300mm Size rough stone variety including cost and
conveyance of all materials to site labour charges etc.,complete as per MoRT&H specification 2504 Toe Wall
Specification No.
19.
Qty
Unit
16 1cum
Rate(INR)
Amount(INR)
1248
(Rupees one thousand two
hundred forty eight only )
19968
Providing Filter material underneath pitching in slopes complete as per MOST specification Nos 305, 309 & 2504 for
Revetment
Specification No.
Qty
Unit
117 1cum
Rate(INR)
1023
(Rupees one thousand
twenty three only )
Amount(INR)
119691
Back filling behind Abutments,wing walls and return wall complete as per drawing and technical as per MoRT&H
SpecificationNo. 2200 CI 710.1.4 of IRC:78-2000
Specification No.
21.
Qty
Unit
75 1cum
Rate(INR)
2030
(Rupees two thousand thirty
only )
Amount(INR)
152250
Providing and laying of filter media with Granular materials/stone crushed aggregates satisfying the requirements
laid down in clause 2504.2.2 MoRT&H specifications to a thickness of not less than 600mm with smaller size
towards the soil and bigger size towards the wall and provided over the entrie surface behind abutment , wing wall
and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications
as per MoRTH Specification Nos 2200 and CI 710.1
Specification No.
22.
Qty
MoRTH specification No
2706 &2200
Unit
165 1 RM
Rate(INR)
Amount(INR)
390
(Rupees three hundred
ninety only )
64350
Providing Weep holes in Plain/Reinforced Concrete Abutment, wing wals/Return wall and with 100mm Diameter AC
pipe extending through the full width of the structure with slopes of 1V:20H towards drawing face complete as per
drawing and technical specifications as per MoRTH specification No 2706 &2200
Specification No.
Qty
Unit
10 1No
Rate(INR)
Amount(INR)
1207
(Rupees one thousand two
hundred seven only )
12070
Drianage spoutes complete as per drawing and technical specifications and as per drawing No MOST SD/103
Specification No.
24.
Qty
Unit
6444 1 Cum
Rate(INR)
569
(Rupees five hundred sixty
nine only )
Amount(INR)
3666636
APPROACHES: Forming embankment with borrowed useful earth from outside road boundary by mechanical means
upto SDR including prewatering of soil at borrow area, removal of top soil, excavation of soils at borrowed area,
conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and
consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H,
including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification
305 (4threvision) (Payment will be made based on level for finished item of work). with a lead of 30 Kms
Specification No.
25.
Qty
MoRT&H Specification
401 (4th revision)
Unit
799 1 Cum
Rate(INR)
2035
(Rupees two thousand thirty
five only )
Amount(INR)
1625965
Construction of Granular sub-base by providing HBT material confirming to Grading - III of MoRT&H Table 400-2
including cost and conveyance of all materials to work site and spreading in uniformlayers with motor grader or by
approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and
compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per
MoRT&H Specification 401 (4th revision) and as directed by the Engineer-in-charge. ( Payment will be made based
on levels for finished item of work ).
Specification No.
26.
Qty
MoRT&H specification.406
(4threvision)
Unit
508 1 Cum
Rate(INR)
2555
(Rupees two thousand five
hundred fifty five only )
Amount(INR)
1297940
Providing, Laying, Spreading for a compacting graded HBT crushed stone aggregate to Wet Mix macadem
specification including premixing the material with water at OMC inMechanical mix plant carriage of mixed material
by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with
Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H
specification.406 (4threvision) for finished item of work. (Payment will be made based on levels for finished item of
work)
Specification No.
27.
Qty
MoRT&H Specification
502 (4th Revision)
Unit
2030 1 Sqm
Rate(INR)
29.1
(Rupees twenty nine and ten
paise only )
Amount(INR)
59073
Providing and aplying Prime coat with bitumen emulsion (Medium setting) (Bulk) using Bitumen pressure distributor
on prepared surface of Granular base including cleaning of road surface and spraying emulsion at the rate of 0.60
Kg per sqm using bitumen pressure distributor for finished item of work as per MoRT&H specification 502 (4th
Revision) and as directed by the Engineer - in charge.
Specification No.
28.
Qty
MoRT&H Specification
503 (4threvision)
Unit
4060 1 Sqm
Rate(INR)
10.5
(Rupees ten and fifty paise
only )
Amount(INR)
42630
Providing and applying tack coat with bitumen Emulsion (Medium settting) (Bulk) using Emulsion pressure
distributor at the rate of 0.20 kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical
broom for finished item of work as per MoRT&H Specification 503 (4th revision) and as directed by the Engineer-inCharge.below BC & DBM
Specification No.
29.
Qty
Unit
102 1 Cum
Rate(INR)
8256
(Rupees eight thousand two
hundred fifty six only )
Amount(INR)
842112
Providing and laying of Dense Graded Bituminous Macadam with with 100-120 TPH Batch type hot mix plant
producing an average output of 75 TPH using HBT crushed aggregates of Grading-II as per table 500-10 of MoRT&H
Specification 507.2.5 (4th revision) premixed with bituminous VG 30 grade @ 4 to 4.50% of weight of total
mixture, transported to site, laid over a previously prepared surface with hydro static paver finisher with sensor
control to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 with smooth wheeled,
vibratory and tandem rollers to achieve the desired compaction for finished item of work as directed by the
Engineer-in-Charge including hire and operational charges all T&P and all other contingent charges necessary
including charges of all materials etc., complete and as per MoRT&H specification No. 507 (4th Revision)
Specification No.
30.
Qty
Unit
82 1 Cum
Rate(INR)
9135
(Rupees nine thousand one
hundred thirty five only )
Amount(INR)
749070
Providing and laying Bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output
of 75 TPH using HBT crushed aggregates of of grading-2 as per 500-17 of specification 509 of MoRT&H (4th
revision), premixed with bitumen VG-30 grade @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work
site, laying with a hydraulic paver finisher with senseor control to the required grade, level and alignment, rolling as
per clause 501.6 & 501.7 MoRT&H with smooth wheeled, vibratory and tendem rollers to achieve the desired
compaction as per MORTH specification 509 (4th revision) complete for finished item of work in all respects as
directed by Engineer-in-charge
ECV(INR): 26,793,126.00
( Rupees two crore sixty seven lacs ninety three thousand one hundred twenty six only )
Tender Details
Tender No. :
Name of Work :
Eligibility Criteria
G.O. Nos.
Class Of Contractor
I Class
I Class
I Class
I Class
To qualify for award of the contract, each bidder in its name should have in the last 5 years
Not Applicable
Capacit Quantity
y
Required
Availability of Key and Critical Equipment Concrete mixer with weigh batcher with
censor con
required for the work:
Quality Control Lab Equipment
Qualification
Rs:8931042
Rs:26793126
1 Set
Minimum
Experience
Number of
Persons
Tender Details
Tender No. :
Name of Work :
percentage
1.
As Directed by the
Engineer-in-Charge
| View All
BOQ 1- 13 of 13 | First | Previous | Next | Last |
percentage
S.No. Specification No.
Qty
Unit
350458 1 Sqm
Rate(INR)
Amount(INR)
3.7
(Rupees three and seventy
paise only )
1296695
Providing Barricading at Bathing Ghat including Preparation of Parking areas for Godavari Pusakaralu : Clearing
Juliflora (Prosafis) jungle including up-rooting and removing of Juliflora stumps including all machinery and labour
charges etc., complete for finishe ditem of work.
Specification No.
2.
Qty
Unit
88708 1 Cum
Rate(INR)
Amount(INR)
328
(Rupees three hundred
twenty eight only )
29096224
Construction of sub grade with Gravel/Carted Earth obtained from Barrowed area with a lead of 16 kms, removal of
soil, excavation of soils at borrowed area, conveyance of soil, deposoting soil, spreading soil, breaking clods,
grading and consoilidation with 8 to 10 Tonnes Vibratory Road Roller @OMC to meet requirement of table No. 300-2
of MoRT&H , including all hire and operational charges of T&P excluding seiniorage charges ,complete for finished
item of work as per MoRT&H specification 305 (5th revision)( The gravel/carted Earth shall satisfy the relevant
standards of APDSS/ MoRT&H and payment shall be made based on levels)
Specification No.
As Directed by the
3.
Engineer-in-Charge
Qty
Unit
29860 1 Rm
Rate(INR)
Amount(INR)
60
(Rupees sixty only )
1791600
Supply , erection, dismantling of wooden barricading made up of casuarina bullies/survey bullies, vertcals of 2m
length fixed at 2m interval and two rows of horizontals at 0.75m spacing, tied with suthli thread including cost of
casuarina bullies/surve bullies, suthli all material and labour charges, supervision charges, day and night watch,
transportaion of wooden bullies etc., complete for finished item of work.
Specification No.
4.
Qty
As Directed by the
Engineer-in-Charge
Unit
240 1 Hr
Rate(INR)
Amount(INR)
624
(Rupees six hundred twenty
four only )
149760
Engaging water tanker of 6KL capacity to sprinkle on roads to arrest dust fly in dry days at parking area and other
required place etc., complete for finished item of work.
Specification No.
5.
As Directed by the
Engineer-in-Charge
Qty
Unit
32400 1 Sqm
Rate(INR)
Amount(INR)
3.7
(Rupees three and seventy
paise only )
119880
Construction of Helipad near Bathing ghat : Clearing Juliflora (Prosafis) jungle including up-rooting and removing of
Juliflora stumps including labour charges and throwing away from Boundary etc., complete for finished item of work
Specification No.
6.
Qty
MoRT&H Specification
No.301
Unit
6627 1 Cum
Rate(INR)
Amount(INR)
105
(Rupees one hundred five
only )
695835
Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead as per MoRT&H
Specification No.301 etc., complete for finished item of work
Specification No.
7. MoRT&H specification 305
Qty
Unit
6254 1 Cum
Rate(INR)
Amount(INR)
328
2051312
(5th revision)
Construction of sub grade with Gravel/Carted Earth obtained from Barrowed area with a lead of 16 kms, removal of
top soil, excavation of soils at borrowed area, conveyance of soil, deposoting soil, spreading soil, breaking clods,
grading to required slope and consoilidation with 8 to 10 Tonnes Vibratory Road Roller @OMC to meet requirement
of MoRT&H , table No. 300-2 of MoRT&H, including all hire and operational charges of T&P excluding seiniorage
charges, complete for finished item of work as per MoRT&H specification 305 (5th revision)( payment shall be made
based on levels)
Specification No.
8.
Qty
Unit
114 1 Cum
Rate(INR)
2205
(Rupees two thousand two
hundred five only )
Amount(INR)
251370
Construction of Granular sub-base by providing HBT material confirming to Grading - II of MoRT&H Table 400-1
including cost, (excluding seigniorage charges) and conveyance of all materials to work site and spreading in
uniform layers with motor grader on prepared surface mixing by mix in place method with Rotavator at OMC and
compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per
MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge( payment shall be made based
on levels)
Specification No.
9.
Qty
Unit
226 1 Cum
Rate(INR)
2527
(Rupees two thousand five
hundred twenty seven only )
Amount(INR)
571102
Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate conforming to MoRT&H table
400-12, 400-13 of MoRT&H specification 406(5th revision) to Wet Mix Macadem specification including cost of all
materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed
material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and
compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as
per MoRT&H specification 406 (5th revision) for finished item of work(payment shall be made based on levels)
Specification No.
10.
Qty
MoRT&H Specification
502 (5th revision)
Unit
1131 1 Sqm
Rate(INR)
31.6
(Rupees thirty one and sixty
paise only )
Amount(INR)
35740
Providing and applying prime coat with bitumen Emulsion (Medium settting) (Bulk) using Emulsion pressure
distributor on prepared surface of Granular base including cleaning of road surface and spraying emulsion at the
rate of 0.70 kgs per sqm using emulsion pressure distributor for finished item of work as per MoRT&H Specification
502 (5th revision) and as directed by the Engineer-in-Charge etc., complete for finished item of work.
Specification No.
Qty
MoRT&H Specification
11.
503 (5th revision)
Unit
1131 1 Sqm
Rate(INR)
11
(Rupees eleven only )
Amount(INR)
12441
Providing and applying tack coat with bitumen VG-10 grade (Bulk) using bitumen pressure distributor at the rate of
0.20 kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of
work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge etc., complete for
finished item of work
Specification No.
12.
Qty
Unit
34 1 Cum
Rate(INR)
9345
(Rupees nine thousand three
hundred forty five only )
Amount(INR)
317730
Providing 30mm thick compacted Bituminous Concrete with 100-120 TPH batch type hot mix plant/ 40-60 TPH hot
mix plant using HBG crushed aggregates of Grading ? 2 as per table 500-7 of specification 507 of MoRT&H (5th
revision), premixed with bitumen VG-30 grade @ 5.4% of mix and filler, including cost and conveyance of all
materials to work site and transporting the hot mix to work site, laying with mechanical paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the
desired compaction as per MoRT&H Specification 507 (5th revision) complete , but excluding cost of seigniorage
charges on materials for finished item of work in all respects as directed by Engineer-in-Charge for finished item of
work(payment shall be made based on levels)
Specification No.
As Directed by the
13.
Engineer-in-Charge
Qty
Unit
1440 1 Rm
Rate(INR)
72
(Rupees seventy two only )
Amount(INR)
103680
Suplly, erection, dismantling of wooden barricading made of Casuarina ballies/survey balliesverticals of 2m length
fixed at 2m interval in three horizontals at 0.75m spacing tied with suthli thread inluding cost of ballies, all
materials, labour charges, supervision charges, day and night watch, transportation etc., complete for finished item
of work.
ECV(INR): 36,493,369.00
( Rupees three crore sixty four lacs ninety three thousand three hundred sixty nine only )
Tender Details
Tender No. :
Name of Work :
Eligibility Criteria
G.O. Nos.
Class Of Contractor
I Class
I Class
I Class
I Class
To qualify for award of the contract, each bidder in its name should have in the last 5 years
Not Applicable
8-10 T
8-10 T
Qualification
Minimum
Experience
Number of
Persons
Rs:36493369
Rs:36493369