Date - 15-Jan-18

MIG - V,OB Plot and Podium , Bandra (East)

General Civil Works including Rock Anchors, WP, Gypsum & Allied Works

Sr. No. Description Amount

1 OP Plot
1.1 Section I Rs. 46,869,852
1.2 Section II Rs. 10,831,865

2 Podium
2.1 Section I Rs. 126,037,450
2.2 Section II Rs. 10,663,780

GRAND TOTAL Rs. 194,402,947

Add, GST @ 18 % Rs. 34,992,530
GROSS VALUE INCL. OF GST Rs. 229,395,477

677533170.xlsx SUMM
 Section A - Bill of Qunatities
General Civil Works of Magnus OB plot

Sr.
No Particulars Unit Quantity Rate Amount
A Section I - Building Works - BUA
Constructing sub & superstructure works of Building (Service Basement + Lower Stlit + Upper
Stilt + 22 Habitable lvls) consisting of RCC works of structural member at all levels/floors with
conventional shuttering (provided by contractor at his cost) upto 1st floor level and with
Aluminium shuttering (provided by Company free of cost) from 1st floor level to terrace level
including AAC Block masonry of specified thk, fixing of door frame below habitable floor level,
etc complete as per scope of work (Annexure A) / approved construction drawing. Rate to
include constructing RCC works above terrace slab with conventional formwork (provided by Sft 55533 844 46,869,852
contractor) which includes parapet wall, staircase waist/landing slab, lift machine room slab,
over head tank, elevation feature etc including AAC block masonry of specified thk, external
plaster , etc complete.

Note : - Contractor should consider co-efficient - 0.007 cum/sft of Payable Built Up Area for
AAC block Masonry .
In the event of increase / decrease , of said co-efficient of AAC Block Masonry, the difference in
co-efficient will be adjusted as per rates mutually agreed for quantity of work executed at site .
However, no payment shall be made towards wastage, overheads , profit or any other factor

Sub Total: SECTION I 46,869,852

B SECTION-II - Item rate
1 Anti-termite treatment
Providing pre-constructional Anti-termite treatment by treating top 500mm of backfilled soil/
inert material other than basement area (at the rate of 5 litres of an emulsion concentrate of
1.0 percent of Imidacloprid 30.5% SC or equivalent approved chemical per square metre of
surface area), Treatment to the soil along with external perimeter of the building/ basement by
punching holes of 12 to 15 mm diameter about 600 mm deep at 150 mm centre to centre as
close to the wall as possible and inject 1.0% Imidacloprid at the rate of 7.5 Lt emulsion Sqm 185 145 26,825.00
concentrate per sqm and sealing the same with proper filling etc. complete through approved
manufacturers with 10 years guarantee bond and as per specifications complete as per IS 6313
part II. MOM: Plinth Area. (Work to be carried out by vendor approved by Company)

2 Drilling 150 mm dia hole in the rock strata as specified by consultant on the drawing with
mechanical boring machine, inserting 3 nos. of 32 mm tor steel (provided by employer free of
cost) stitch welded together including grouting the hole with Cement grout plus Cebex 100
admixture as per manufacturers specification, etc. complete all as per approved construction
drawings, specifications and as directed by engineer in-charge / consultant. The rate to include
expense for carting away debris, cleaning and clearing, debris management etc. complete. Rmt QRO 2500 -
(Work to be carried out by vendor approved by employer) MOM - Drill length from top of PCC
laid.

3 Providing parallel threaded upset end cold forged mechanical couplers for reinforcement steel
as per IS 16172, having bar break properties for 100% tension and compression joints as per IS
16172 or as per direction of consultant wherever required for continuation / splicing of bars.
Every batch of couplers received on site to be tested as per IS-16172,for coupler and reducer
coupler; scope will be including testing of the couplers (testing includes mechanical & Chemical
testing including Slip test) from KL approved 3rd party lab.The coupler shall have the marking of -
batch numbers etc. The coupler shall have the marking of batch numbers etc. complete.
Makes: Kamar, India Coupler, Shivshakti, Sanfield, India Rebar Solutions. (In case of reducer
coupler rate of higher dia will be considered)

3a for 20 mm dia bar No QRO 600 -

3b for 25 mm dia bar No 300 700 210,000.00
3c for 28 mm dia bar No 110 800 88,000.00
3d for 32 mm dia bar No 325 950 308,750.00
3e for 40 mm dia bar No 305 1050 320,250.00

Magnus - OB plot 2
 Sr.
No Particulars Unit Quantity Rate Amount
4 Laying vacuum dewatered (Tremix) flooring with ready mix concrete of M20 grade using
FLYASH/GGBS, as per approved mixed design & downsize aggregates up to 10mm & using
12mm micro glass fibers (KDMFIBER or equivalent) at 85 gms per 50 kg cement, with average
thk 100mm (to be laid in alternate panels to specified slope) with steel channel formwork
including carrying out vacuum dewatering & power floater treatment to freshly laid well
compacted concrete, finished to required levels, and power troweled to get desired finish
including curing with hessian cloth, cutting and making of groove (5mm width and 25 to 40mm
depth)in laid concrete in floor at specified distance by mechanical saw within 48 hrs., groove
filling with bitumen provided by contractor etc. complete. Rate to include all labour, material,
tools, equipment's, other incidental necessary to complete the work, clearing of all debris &
loose material. Panel size should be not more than 16 sqmt. Location : B2 Level Sqm QRO 1750 -
Note: The sawing operation should be carried out as soon as concrete is ready to accept the
saw cut. Reduction or increase in average thickness will be paid or recovered based on the rate
of concrete laying activity same as above.

4a Extra Over item 6 above for non metallic surface floor hardener (3.5kg/sqm) of Sunanda
Chemicals or equivalent make approved by engineer-in-charge Sqm QRO 410 -

5 IPS

Laying ready mix concrete of specified grade & using 12mm micro glass fibers (KDMFIBER or
equivalent) at 85 gms per 50 kg cement for Indian Patent Stone (IPS) monolithic flooring of thk
50 mm in pump room and wherever specified including cleaning, trimming, curing the surface, Sqm 178 950
laying in alternate panels not more than 2 Smt (one side not exceeding 1.70 m), trowelling,
smoothening, curing, shuttering etc. complete all as per approved construction drawings,
specifications and as directed by Engineer in-charge. 169100
6 Providing and applying 12 mm thk sand faced single coat internal plaster in true line, level &
plumb/right angle to concrete columns/walls/ beams/ceilings and masonry walls and wherever
required in cement mortar 1:4 (1 cement and 4 River Sand), including chat plaster, float finish or
as required by architect at all levels & places including all lead and lift of materials, hacking of
concrete surface, independent double legged scaffolding, curing etc. complete as per
specification and as directed by Engineer-in-charge. Rate to include providing & using 6mm
micro glass fibers ( KDMFIBER or equivalent) at 50 gms per 50 kg cement, preparing the
surface, providing and fixing 150 mm wide Alkali resistant fibre glass mesh (145 gsm) on Sqm QRO 1050 -
concrete-masonry junctions and grooves chased by different services agencies for electrical /
plumbing / any allied services etc. complete.Plaster to be cured for minimum 10days.

7 Providing & applying 12 to 15 mm thk single coat dash coat plaster in true line, level & plumb to
concrete columns/walls and masonry walls and / or wherever required at all levels & places in
cement mortar 1:5 (1 cement and 5 fine aggregate) at all levels & places including all lead and
lift of materials, hacking of concrete surface, independent double legged scaffolding, curing etc
complete as per specification and as directed by Engineer-in-charge. Rate to include providing &
using 6 mm micro glass fibers (KDMFIBER or equivalent) at 50 gms per 50 kg cement, preparing
the surface, providing and fixing 150 mm wide Alkali resistant fibre glass mesh (145 gsm) on Sqm 150 650 97,500.00
concrete -masonry junctions and grooves chased by different services agencies for electrical /
plumbing / any allied services etc. complete.

Magnus - OB plot 3
 Sr.
No Particulars Unit Quantity Rate Amount
8 Structural Steel Work
Preparing shop drawings, obtaining structural consultants approval, supplying, fabricating in
accordance with IS:800, delivering at site, hoisting and fixing in position, including all temporary
staging and supporting work and making all structural steel work in accordance with the design,
drawings prepared by the consultants. The rate of steel work shall include cutting, grinding,
machining, assembly, welding, jointing, building up new sections, cost of fasteners (nuts, bolts
and washers), pre-heating the sections to temperatures up to 250 degree C if thickness of the
section is equal to or more than 25 mm. Fabrication will involve building up required section as
per drawing, steel conforming to IS : 226 and IS : 2062 with minimum yield strength of 250 MPa
or as per structural consultant design and up to 355 MPa (Low carbon steel or as per design).
The rate shall also include two coat of zinc rich primer (to be of 60 micron thickness of each
coat) after properly cleaning the steel surface with sand blasting etc. complete all as per MT 5 150000 750,000.00
approved construction drawings, specifications and as directed by engineer in-charge /
consultant.
Welding to be used for the structural work shall be of minimum of 5G grade certified.
( Basic Rate of Structural Steel = Rs.50,000/- per MT excluding GST)

9 Providing, Fabricating and fixing of Hot Dipped Galvanized MS Ladder in UG tanks, STP made out
by structural member as vertical supports, steps with Base plate with hot dip galvanized etc.
complete as per requirement and instructions given by site in charge MT 2 175000 350,000.00

Providing and fixing 600 mm long MS hot dip galvanized PUDDLE FLANGES fabricated out of 6
mm thick MS plates of suitable size and IS:1239 heavy class pipes with BS 10 Table E Flanges
10 properly fixed in walls & top slab of tanks.The entire fittings shall be hot dipped galvanized after -
fabrication. Length shall be minimum 600 mm or wall thickness plus 200 mm on either side
(which ever is more). (Sleeves for UGT/OHT)

a 25 mm dia (screwed ends) Nos. 4 1,500.00 6,000.00

b 32 mm dia (screwed ends) Nos. QRO 1,800.00 -
c 50 mm dia (single flanged ends) Nos. 4 2,000.00 8,000.00
d 80 mm dia (double flanged ends) Nos. 4 2,400.00 9,600.00
e 100 mm dia (single flanged ends) Nos. 10 2,400.00 24,000.00
f 100 mm dia (Double flanged ends) Nos. 3 3,000.00 9,000.00
g 150 mm dia (Single flanged ends) Nos. QRO 6,000.00 -
h 150 mm dia (Double flanged ends) Nos. 1 7,500.00 7,500.00
i 250 mm dia (Single flanged ends) Nos. QRO 12,000.00 -
j 250 mm dia (Double flanged ends) Nos. QRO 14,000.00 -
k 300 mm dia (Single flanged ends) Nos. QRO 18,000.00 -
l 400 mm dia (Single flanged ends) Nos. QRO 22,000.00 -
11 Mechanical couplers
Providing parallel threaded upset end cold forged mechanical couplers for reinforcement steel
as per IS 16172, having bar break properties for 100% tension and compression joints as per IS
16172 or as per direction of consultant wherever required for continuation / splicing of bars.
Every batch of couplers received on site to be tested as per IS-16172,for coupler and reducer
coupler; scope will be including testing of the couplers (testing includes mechanical & Chemical
testing including Slip test) from KL approved 3rd party lab.The coupler shall have the marking of
batch numbers etc. The coupler shall have the marking of batch numbers etc. complete.
Makes: Kamar, India Coupler, Shivshakti, Sanfield, India Rebar Solutions. (In case of reducer
coupler rate of higher dia will be considered)

a for 20 mm dia bar No QRO 600 -

b for 25 mm dia bar No 595 700 416,500.00
c for 28 mm dia bar No 385 800 308,000.00
d for 32 mm dia bar No 80 950 76,000.00
e for 40 mm dia bar No QRO 1050 -

Magnus - OB plot 4
 Sr.
No Particulars Unit Quantity Rate Amount
12 Providing and applying 12 mm thk sand faced single coat internal plaster in true line, level &
plumb/right angle to concrete columns/walls/ beams/ceilings and masonry walls and wherever
required in cement mortar 1:4 (1 cement and 4 River Sand), including chat plaster, float finish or
as required by architect at all levels & places including all lead and lift of materials, hacking of
concrete surface, independent double legged scaffolding, curing etc. complete as per
specification and as directed by Engineer-in-charge. Rate to include providing & using 6mm
micro glass fibers ( KDMFIBER or equivalent) at 50 gms per 50 kg cement, preparing the
surface, providing and fixing 150 mm wide Alkali resistant fibre glass mesh (145 gsm) on
concrete-masonry junctions and grooves chased by different services agencies for electrical /
plumbing / any allied services etc. complete.Plaster to be cured for minimum 10days.

a Upto 15th floor Sqm 100 650 65,000.00

b From 16th to 22nd floor including work on terrace level Sqm 47 700 32,900.00
13 Providing 24mm thk waterproof sand faced plaster in true line, level & plumb to external face of
building 1st typ floor level & above terrace slab label and wherever specified (in two coats; each
of 12mm thk) undercoat in cement mortar 1:4 (1 cement and 4 fine aggregate) overcoat in
cement mortar 1:3 (1 cement and 3 fine aggregate) mixed with integral waterproofing
compound 4% by weight of cement (dosage as specified by the manufacturer), sponge / tyroline
finish as required by architect at all levels and places including all lead and lift of materials,
hacking of concrete surface, independent double legged scaffolding, curing etc. complete as per
specification and as directed by Engineer-incharge. Rate to include providing recron polyester
fibres in cement mortar, preparing the surface, providing and applying Hack-aid plast on RCC
surface, providing & fixing 150mm wide PVC chicken mesh of 20 gauge fixed with GI wire nails
over junction of two dissimilar material with chat coat, providing & applying hack-aid chemical
of sunanda make or equivalent on RCC surface etc. complete.

a Upto 15th floor Sqm QRO 1150 -

b From 16th to 22nd floor including work on terrace level Sqm QRO 1200 -
14 Providing & applying 12 to 15 mm thk single coat dash coat plaster up to 15th floor level in true
line, level & plumb to concrete columns/walls and masonry walls and / or wherever required at
all levels & places in cement mortar 1:5 (1 cement and 5 fine aggregate) at all levels & places
including all lead and lift of materials, hacking of concrete surface, independent double legged
scaffolding, curing etc complete as per specification and as directed by Engineer-in-charge. Rate
to include providing & using 6mm micro glass fibers (KDMFIBER or equivalent) at 50 gms per 50
kg cement, preparing the surface, providing and fixing 150 mm wide Alkali resistant fibre glass
mesh (145 gsm) on concrete-masonry junctions and grooves chased by different services
agencies for electrical / plumbing / any allied services etc. complete

a Upto 15th floor Sqm 2320 550 1,276,000.00

b From 16th to 22nd floor including work on terrace level Sqm 1082 600 649,200.00
15
Providing & applying Gypsum plaster of average thk up to 10 mm on any vertical surface
(unplaster masonry surface / concrete surface) including door & window jamb as directed in
true line, level and plumb at all levels & places including providing double legged scaffolding,
making sharp edge at corner of wall, beam etc. complete as per specification & as directed by
Engineer-in-charge. Rate to include manual lifting & shifting of gypsum bags (manually or by
other means) for all lead & lifts, providing and fixing 150 mm wide Alkali resistant fiber glass
mesh (145 gsm) on concrete-masonry junctions and grooves chased by different services
agencies for electrical / plumbing / any allied services etc. complete.
a Upto 15th floor Sqm 6054 450 2,724,300.00
b From 16th to 22nd floor including work on terrace level Sqm 2825 500 1,412,500.00
16
Providing and applying GypRock BOND-it or equivalent pre-approved product as mechanical
bonding agent to RCC surface to receive gypsum, at all levels & places including providing Sqm 3552 95 337,440.00
double legged scaffolding, lifting & shifting etc. complete as per specification & as directed by
Engineer-in-charge
16
Providing & applying Gypsum Plaster of 8 to 10 mm thk on horizontal surface such as ceiling,
beam soffit as directed in true line and level at all levels & places including providing double
legged scaffolding, making dhar at the edge of beam soffit and corner of ceiling etc complete as
per specification & as directed by Engineer-in-charge. Rate to include manual lifting & shifting of
gypsum bags ( manually or by other means) for all lead & lifts.
a Upto 15th floor Sqm QRO 400 -
b From 16th to 22nd floor including work on terrace level Sqm QRO 450 -

Magnus - OB plot 5
 Sr.
No Particulars Unit Quantity Rate Amount

Schedule of rates for supplying workers on daily wages for various departmental works. The
17 rates to include cost of accommodation, firewood, conveyance, and all labour related costs
incurred by contractor including expenses of statutory complience overheads and profits per
man day of 8 hours.
a Mason (Masonry) / Water proofing Plaster Day QRO 1,600.00 -
b Mason Plaster Day QRO 1,600.00 -
c Carpenter Shuttering Day QRO 1,500.00 -
d Carpenter helper Day QRO 1,200.00 -
e Steel Fitter Day QRO 1,500.00 -
f Male Coolie Day QRO 1,200.00 -
g Female Coolie Day QRO 1,200.00 -
h Supervisor Day QRO 2,000.00 -

Puddle Flange
Providing and fixing 600 mm long MS hot dip galvanized PUDDLE FLANGES fabricated out of 6
mm thick MS plates of suitable size and IS:1239 heavy class pipes with BS 10 Table E Flanges
18
properly fixed in walls & top slab of tanks.The entire fittings shall be hot dipped galvanized after
fabrication. Length shall be minimum 600 mm or wall thickness plus 200 mm on either side
(which ever is more). (Sleeves for UGT/OHT)

a 25 mm dia (screwed ends) Nos. 3 1,500.00 4,500.00

b 32 mm dia (screwed ends) Nos. QRO 1,800.00 -
c 50 mm dia (single flanged ends) Nos. 6 2,000.00 12,000.00
d 80 mm dia (double flanged ends) Nos. 3 2,400.00 7,200.00
e 100 mm dia (single flanged ends) Nos. 7 2,400.00 16,800.00
f 100 mm dia (Double flanged ends) Nos. 3 3,000.00 9,000.00
g 150 mm dia (Single flanged ends) Nos. QRO 6,000.00 -
h 150 mm dia (Double flanged ends) Nos. QRO 7,500.00 -
i 250 mm dia (Single flanged ends) Nos. QRO 12,000.00 -
j 250 mm dia (Double flanged ends) Nos. QRO 14,000.00 -
k 300 mm dia (Single flanged ends) Nos. QRO 18,000.00 -
l 400 mm dia (Single flanged ends) Nos. QRO 22,000.00 -
19 PVC sleeves in Beam/column/slab
a P/F PVC sleeves-beams,slab,columns 32mm RMT 200 700 140000
b P/F PVC sleeves-beams,slab,columns 40mm RMT 200 750 150000
c P/F PVC sleeves-beams,slab,columns 50mm RMT 200 850 170000
d P/F PVC sleeves-beams,slab,columns 75mm RMT 200 950 190000
e PVC Sleeves-100mm dia RMT 200 1050 210000
f PVC Sleeves-150mm dia RMT 200 1200 240000
20 Co-ordination charges to be paid to the Main Civil Contractor , in the event nominated
specialised agencies for basement waterproofing and Gypsum work are finalized by Company
in concurrence with the Main Contractor and order will be routed through Main Civil Contractor
.
Co-ordination charges shall includes
b)Supervision of work
c) Responsible for Quality compliance
d) Responsible for Safety compliance
e) Providing Water for Construction and Labour camp
f) Providing labour hutment % 10 -
g) Sub-contractor can avail PMV and sanitation facility of yours
h) Bill checking and Certification
i) Making payment as per agreed payment terms

Sub Total: SECTION-II 10,831,865

Sub Total: SECTION-I & II 57,701,717
Add GST 18% 10,386,309
Total Amount incl GST 68,088,026

Magnus - OB plot 6
 Section B - Bill of Qunatities
General Civil Works of Extended Podium (Building A, B, C)

Sr.
No Particulars Podium Unit Rate Amount
1 Extended Podium Works ( Attached to Building A, B, C)
Constructing sub & superstructure works of Extended Podium ( 3 Lvl of Basement ) plus
Clubhouse (Ground + 1 Floor ) consisting of RCC works of structural member at all levels
including Ramp with conventional shuttering (provided by contractor at his cost) etc complete
as per scope of work (Annexure A) / approved construction drawing. Rate to include
constructing RCC works of staircase headroom slab. 132671 Sft

950 126,037,450
Note : - Contractor should consider co-efficient - 0.002 cum/sft of Payable Built Up Area for
AAC block Masonry .
In the event of increase / decrease , of said co-efficient of AAC Block Masonry, the difference in
co-efficient will be adjusted as per rates mutually agreed for quantity of work executed at site .
However, no payment shall be made towards wastage, overheads , profit or any other factor

Sub Total: SECTION I 126,037,450

B SECTION-II
Item Rate - Sub Structure

Providing Anti-termite treatment by treating 1) Soil in Contact with the structure 2) basement
areas 3) Ground floor area of both the bldgs. by spraying (at the rate of 5 liters of an emulsion
concentrate of 1:477 of Premise 350sc of Bayer Environmental Science or equivalent approved
1 2,355 Sqm 145.00 341,475.00
chemical per square metre of surface area). complete through approved manufacturers with 10
years guarantee from the date of the start of the construction activity of the Buildings. (Work to
be carried out by vendor approved by Employer) MOM: Plinth Area.

Laying vacuum dewatered (Tremix) flooring with ready mix concrete of specified grade using
FLYASH & downsize aggregates upto 10mm & using 12mm micro glass fibers ( KDMFIBER or
equivalent) at 85 gms per 50 kg cement, with average thk 100mm (to be laid in alternate panels
to specified slope) with steel channel formwork including carrying out vacuum dewatering &
power floater treatment to freshly laid well compacted concrete, finished to required levels,
and power trowelled to get desired finish including curing with hessian cloth, cutting and
making of groove (5mm width and 25 to 40mm depth)in laid concrete in floor at specified
2 distance by mechanical saw within 48 hrs, groove filling with bitumen provided by contractor 4,002 Sqm 1,750.00 7,003,500.00
etc complete. Rate to include all labour, material, tools, equipments, other incidental necessary
to complete the work, clearing of all debris & loose material. Panel size should be not more
than 16 sqmt.
Note: The sawing operation should be carried out as soon as concrete is ready to accept the
saw cut. Reduction or increase in average thickness will be paid or recovered based on the rate
of concrete laying activity same as above.

Extra Over item 5 above for non metallic surface floor hardener (3.5kg/sqm) of Sunanda
3 4,002 Sqm 350.00 1,400,700.00
Chemicals or equivalent make approved by engineer-in-charge

Laying ready mix concrete of specified grade & using 12mm micro glass fibers ( KDMFIBER or
equivalent) at 85 gms per 50 kg cement for Indian Patent Stone (IPS) monolithic flooring of thk
50mm in pump room and wherever specified including cleaning, trimming, curing the surface,
4 laying in alternate panels not more than 2 sqm (one side not exceeding 1.7mtr), trowelling, 807 Sqm 410.00 330,870.00
smoothening, curing, shuttering etc. complete all as per approved construction drawings,
specifications and as directed by Engineer in-charge.

Magnus - Podium 7
 Sr.
Particulars Podium Unit Rate Amount
No

Providing, fixing and aligning parallel threaded upset end cold forged mechanical couplers for
reinforcement steel as per BS 8110, having bar break properties for 100% tension and
compression joints as per manufacturer's recommendations or as per direction of consultant
5 wherever required for continuation / splicing of bars. The item includes all operations and
arrangements such as machining the reinforcing bars to match the threads of the couplers,
provision of bar/coupler caps to protect the thread and related operation & arrangement as
required to complete the work. Every batch of couplers received on site to be tested as per ACI
– 318, 2008 for Type II.

a for 12 mm dia bar 0 NO 450 -

b for 16 mm dia bar 0 NO 500 -
c for 20 mm dia bar 0 NO 600.00 -
d for 25 mm dia bar 0 NO 700.00 -
e for 28 mm dia bar 0 NO 800.00 -
f for 32 mm dia bar 0 NO 950.00 -
g for 40 mm dia bar 0 NO 1,050.00 -

Fixing in position door frame of any size in true plumb & line with expanding PU foam
Soudafoam 1K of Mcoy Soudal or approved equivalent, and also by embedding 150 mm long
mechanical anchor bolts of Hilti or approved equivalent make-7 nos per frame (brought by
6 vendor) at all levels including all lead and lift of frame and materials, curing, scaffolding etc. 5 No 2,000.00 10,000.00
complete. Note: edge of foam fill should be cut at wall face and covered with tape or gypsum
punning immediately after foam is cured.

Providing and applying 12-15mm thk sand faced single coat internal plaster in true line, level &
plumb to concrete columns/walls/ beams/ceilings and masonry walls and wherever required in
cement mortar 1:4 (1 cement and 4 fine aggregate), including chat plaster, float finish or as
required by architect at all levels & places including all lead and lift of materials, hacking of
7 concrete surface, independent double legged scaffolding, curing etc. complete as per 0 Sqm 650.00 -
specification and as directed by Engineer-in-charge. Rate to include providing & using 6mm
micro glass fibers ( KDMFIBER or equivalent) at 50 gms per 50 kg cement, preparing the
surface, providing and fixing 150 mm wide Alkali resistant fibre glass mesh (145 gsm) on
concrete-masonry junctions and grooves chased by different services agencies for electrical /
plumbing / any allied services etc. complete.

Providing 12-15mm thk single coat dash coat plaster in true line, level & plumb to concrete
columns/walls and masonry walls and / or wherever required at all levels & places in cement
mortar 1:5 (1 cement and 5 fine aggregate) at all levels & places including all lead and lift of
materials, hacking of concrete surface, independent double legged scaffolding, curing etc
8 complete as per specification and as directed by Engineer-in-charge. Rate to include providing & 0 Sqm 550.00 -
using 6mm micro glass fibers ( KDMFIBER or equivalent) at 50 gms per 50 kg cement, preparing
the surface, providing and fixing 150 mm wide Alkali resistant fibre glass mesh (145 gsm) on
concrete-masonry junctions and grooves chased by different services agencies for electrical /
plumbing / any allied services etc. complete.

Providing & applying Gypsum plaster of average thk upto 10mm on any vertical surface
(unplastered masonry surface / concrete surface) including door & window jamb as directed in
true line, level and plumb at all levels & places including providing double legged scaffolding,
making sharp edge at corner of wall, beam etc. complete as per specification & as directed by
9 3,232 Sqm 450.00 1,454,400.00
Engineer-in-charge. Rate to include manual lifting & shifting of gypsum bags ( manually or by
other means) for all lead & lifts, providing and fixing 150 mm wide Alkali resistant fibre glass
mesh (145 gsm) on concrete-masonry junctions and grooves chased by different services
agencies for electrical / plumbing / any allied services etc. complete..

Providing & applying GypRock BOND-it or equivalent pre-approved product as mechanical

bonding agent to RCC surface to receive gypsum, at all levels & places including providing
10 double legged scaffolding, lifting & shifting etc. complete as per specification & as directed by 1,293 Sqm 95.00 122,835.00
Engineer-in-charge

Magnus - Podium 8
 Sr.
Particulars Podium Unit Rate Amount
No
11

Fixing in position door frame of any size in true plumb & line with expanding PU foam
Soudafoam 1K of Mcoy Soudal or approved equivalent, and also by embedding 150 mm long
mechanical anchor bolts of Hilti or approved equivalent make-7 nos per frame (brought by
0 No 2,000.00 -
vendor) at all levels including all lead and lift of frame and materials, curing, scaffolding etc.
complete. Note: edge of foam fill should be cut at wall face and covered with tape or gypsum
punning immediately after foam is cured.

Providing and applying 12-15mm thk sand faced single coat internal plaster in true line, level &
plumb to concrete columns/walls/ beams/ceilings and masonry walls and wherever required in
cement mortar 1:4 (1 cement and 4 fine aggregate), including chat plaster, float finish or as
required by architect at all levels & places including all lead and lift of materials, hacking of
concrete surface, independent double legged scaffolding, curing etc. complete as per
12 0 Sqm 650.00 -
specification and as directed by Engineer-in-charge. Rate to include providing & using 6mm
micro glass fibers ( KDMFIBER or equivalent) at 50 gms per 50 kg cement, preparing the
surface, providing and fixing 150 mm wide Alkali resistant fibre glass mesh (145 gsm) on
concrete-masonry junctions and grooves chased by different services agencies for electrical /
plumbing / any allied services etc. complete.

Sub Total: SECTION II 10,663,780

Sub Total: SECTION-I & II 136,701,230
Add GST 18% 24,606,221
Total Amount incl GST 161,307,451

Magnus - Podium 9
 Annexure I

Plant & Machinery & Technical / Non Technical Staff Deployment Schedule
(as proposed by Contractor)

Structure
1 Plant & Machinery
OB Plot

Free Standing Tower Crane 1

Man cum Material Hoist - Twin Cage (2 Ton) Capacity - Bldg Ht 60 mtr 1
Bar Bending & Cutting Machine 1
Concrete Pump - 1
Concrete Vibrator 4
Rebar tying tool 2
Gun for grouting and filling tie rod hole & wall tie hole 2
Power Floater for levelling of concrete 1
Vibrator Needle- 60mm 4
Vibrator Needle- 40mm 2
Earth Compactor 1
Elect Welding Machine 1
Submersible Curing Pump - 60 Mtr 1
Dewatering Pump- 5 /10HP 1
Gondola 1
Grinding Machine 2
Block Cutting Tools 2
Survey Equip - Auto Level 1
Survey Equipt - Total Station 1
Lab Equipment 1
Structure
2 Technical / Non Technical Supervisory Staff
OB Plot
Project Incharge 1
Project / Sr Engineer 1
Billing Engineer 1
Billing Assistant / BBS Engineer 1
QA/QC Eng 1
Lab Technician 1
Planning Engineer 1
Foreman Steel Yard 1
Foreman 2
Supervisor 1
Surveyor 1
Safety Officer 1
Safety Supervisor 1
Schedule

Structure
Podium

0
0
1
1
4
2
2
1
4
2
1
1
1
1
0
2
2
1
1
1
Structure
Podium
1
1
1
1
1
1
1
1
2
1
1
1
1