Quotation for HVAC Production Hall

Supplier Name :- Customer Name:-

Supplier Code:- Contact person:-
GST NO.:- Contact No:-
Quoatation No.:-
Quoatation Date:-
Nature of Buissness :-Material/Service

Total Amount
Sr. No. Part Description Drawing No. UOM Qty. HSN/SAC Code Unit Price Total Amount GST Tax % including GST

Civil/Infra work of HVAC Production Hall incl. RCC Flooring, Toilet

1 Construction, Foundations etc details as per Annexure/BOQ -- LOT 1.0

Sanitary Fixtures, Internal & external water Pipelines & Sewerage System for
2 Toilet of HVAC, Production Hall-3 details as per Annexure/BOQ -- LOT 1.0

Total Amount 0

PO Terms & Conditions

Payment Terms:-
Deliver Terms:-
Freight Terms:-

Supplier's autherised signature & Stamp

Classification | Public
 PROJECT- ESCORT KUBOTA - RECONSTRUCTION OF FLOOR
SUMMARY
HVAC HALL NO 3 -AREA -2500 SQ.M
SN DESCRIPTION AMOUNT

1) CIVIL
A. Dismantling Works: 1,739,935.00
B. Cement Concrete Work : 1,412,500.00
C. Reinforced Cement Concrete Works: 221,900.00
D. Reinforcement & Structural Steel work : 2,069,500.00
E. Brick work : 105,200.00
F. Flooring : 7,787,100.00
G. Finishing : 752,850.00

TOTAL - CIVIL-1 14,088,985.00

2) TIOLET
SANITARY FIXTURES ( PROVIDING & FIXING ) 293,485.00
SOIL, WASTE AND VENT PIPES 88,778.00
COLD / HOT WATER SUPPLY (INTERNAL) 128,859.00
EXTERNAL WATER SUPPLY 95,400.00
SEWERAGE SYESTEM 583,850.00
TOTAL -TIOLET-2 1,190,372.00

TOTAL =(1 + 2) 15,279,357.00

Classification | Public
BOQ-Escorts Kubota Railway Equipment Division- HVAC HALL NO 3 -2500 SQ.M
S.No Items Quantity Unit Rate Amount
A. Dismantling Works:
01 Dismantling Brick Work and removal of malba all complete (Manually or Mechanically) as per site 10,200.00
conditions including the cost of compressed air if required and disposal of Debris/malba to
desired location by any means outside the site boundary as per the Directions of the Architects 15 Cu.M 680

02 Dismantling R.C.C. including by mechanical means including stacking of steel bars and removal 900,000.00
of unserviceable material or malba all complete (Manually or Mechanically) as per site conditions
including the cost of compressed air if required and disposal of Debris/malba to desired location 400 Cu.M 2250
by any means outside the site boundary as per the Directions of the Engineer.

03 Dismantling P.C.C. and removal of malba all complete (Manually or Mechanically ) as per site 337,500.00
conditions including the cost of compressed air if required and disposal of Debris/malba to
desired location by any means outside the site boundary as per the Directions of the Architects 250 Cu.M 1350

04 Dismantling Stone Soling and removal of malba all complete (Manually or Mechanically) as per 178,750.00
site conditions including the cost of compressed air if required and disposal of Debris/malba to
desired location by any means outside the site boundary as per the Directions of the Architects. 275 Cu.M 650
(Including reusing the stones)
05 Dismantling Structural steel frames, purlins railing etc. including stacking the same carefully all 16,000.00
complete as per site conditions and the Directions of the Architects (including the cost of 2 Ton 8000
disposing it off from the site, if required)
06 Disposal of Debris or Surplus Earth to the govt approved dump yard by any means Cost to 238,000.00
include the cost of laisoning, getting approval, etc. all complete Lift upto 5-10 km from the Site 850 Cu.M 280

07 Disposal of Debris or Surplus Earth to the with in the RED division premise Cost to include the 30,685.00
cost of loading & Unloading & Levelling the debris/soil. 81 Cu.M 380
08 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas 19,800.00
(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and
disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in- 110 Cu.M 180
charge.
a) All kinds of soil.
09 Re-Filling of Excvated earth of approved quality in layers not exceeding 20 cm in depth, breaking 9,000.00
clods, watering , rolling each layer , and consolidating every 3rd and topmost layer to achieve
min. 95% of Max. Dry Density and dressing up for roads and filling up ground depressions
including the removal of any soft patches and filling it with hard soil / sand, with necessary slope if 90 Cu.M 100
required as per drawings ) at all levels as per the instructions of the Architects.

TOTAL CARRIED OVER TO SUMMARY OF COST : RS. 1,739,935.00

B. Cement Concrete Work :
10 Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be 37,500.00
applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of 50 Sq.M 750
concrete surface).
11 Providing and laying Plain Cement Concrete (M7.5) in bases of column footings, below flooring 1,375,000.00
and where ever required including necessary Wooden planks / steel sections / ply shuttering, all 250 Cu.M 5500
complete.
TOTAL CARRIED OVER TO SUMMARY OF COST : RS. 1,412,500.00
C. Reinforced Cement Concrete Works:
12 Providing and laying in position M25 grade of Reinforced Cement Concrete including admixtures 175,000.00
and curing as per IS codes excluding the cost of centering, shuttering and reinforcement steel of 25 Cu.M 7000
buildings / structures at all levels
13 Centering and shuttering with laminated plyboard including strutting, propping etc. and removal of -
form (i.e. including the cost of de-shuttering and de-centering) of any shape for: (Shuttering to be
designed by the contractor and schematic plan of shuttering should be provided one month
before execution to the Architect for Approval and should be as per IS code)

a. Foundations, footings, bases of columns, Machine Foundations etc. for mass concrete.(Steel 23,100.00
Plates / ply / Laminated ply Shuttering) 35 Sq.M 660
b. Walls (any thickness), Columns, Slabs,Beams, Plinth Beams including attached pilasters, 23,800.00
buttresses, Tie Beams, Pergolas and string courses all works above Ground Level for all heights 35 Sq.M 680
with exposed quality laminated ply shuttering
TOTAL CARRIED OVER TO SUMMARY OF COST : RS. 221,900.00
D. Reinforcement & Structural Steel work :
14 Reinforcement for R.C.C. work including straightening, bending, binding and placing in position 1,920,000.00
complete including submitting BBS & Pour card in advance before execution including the cost of
binding wire, cover block, etc. (MTC for steel should be submitted for each batch of reinforcement 16 M.T 120000
purchased)
15 Steel work CO2 MIG / ARC welded/bolted as per Architect's requirements in trusses, Portals, -
purlins and stair / mezzanine railings, Grills, Gantry Girders, edge protection, inserts etc., as per
drawing including cutting, hoisting, fixing in position along with base plate and applying a priming
coat of approved steel primer in Square Tubular sections, angles, flats, Sheets and channels as
per design (including preparation of fabrication drawings if required, to be submitted to the
Architect for approval) all complete as per drawing and the directions of the Architects. Bolts,
Nuts & washers shall be measured and paid in the respective items. Cost to include supply of
Steel, cutting, fabricating as per drawings, erection, painting with Enamel Paint having total DFT
of 120 micron (min), touching up at the time of handing over, etc all complete

a) M.S. Flats, M.S.Angles,SHS PIPE Chequerred Plates, Channel, ISMC/ISMB sections as per 115,000.00
design - 250 MPA 1 M.T 115000
b) MS Plates - 350 Mpa 0 M.T 120000 -
c) M.S.Tubes for Shed with necessary hold fasts all complete including fixing the same in position -
by welding to reinforcement steel, if necessary as per drawings/grouting before concreting 0 M.T 120000

Classification | Public
S.No Items Quantity Unit Rate Amount
16 Providing and fixing foundation Bolts of grade 4.6 with the help of Total Station as per the 34,500.00
requirement. Total station should be made available at site for cross verification of alignment as 0.30 M.T 115000
per the requirement of Engineer-in-charge/ Architects
17 Providing and fixing/erection of partition with necessary MS Angle framework with MS wire Mesh -
upto a height of 1.2 meters with as per design (including preparation of fabrication drawings if
required, to be submitted to the Architect for approval) all complete as per drawing and the
directions of the Architects. Bolts, Nuts & washers shall be measured and paid in the respective
0 Sq.M 950
items. Cost to include supply of Steel, cutting, fabricating as per drawings, erection, painting with
Enamel Paint having total DFT of 120 micron (min), touching up at the time of handing over, etc
all complete

2,069,500.00
E. Brick work :
18 Brick work with bricks of the class designation 75 in Foundation & Plinth (below Main Shed FFL 7,200.00
Level) in Cement Mortar 1:6 (1 Cement : 6 Coarse Sand ) 1 Cu.M 7200
Brick work with bricks of the class designation 75 in Super structure (above main shed FFL level) 75,000.00
in Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) at all heights above Ground floor level. 10 Cu.M 7500

Half Brick work with bricks of the class designation 75 in Super structure in Cement Mortar 1:4 (1 23,000.00
Cement: 4 Coarse Sand) with 2 nos. 8 mm dia. M.S. steel at every 4th course at all heights above
Ground floor level at all levels. (Reinforcement Steel shall be measured & Paid Separately) 20 Sq.M 1150

TOTAL CARRIED OVER TO SUMMARY OF COST : RS. 105,200.00

F. Flooring :
19 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075
mm ) to Water Bound Macadam (WBM) of final compacted thickness 100 mm specification
including premixing the material with water at OMC mechanically, carriage of mixed material to
required place within site, for all leads & lifts, laying in uniform layers with mechanical paver
finisher in sub- base / base course on well prepared surface and compacting with vibratory roller 250 Cum 2600 650,000.00
of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and
directions of Architects.

15 Providing & laying 150 mm Thk Tremix Flooring of RCC M-30 (400 kg. of cement per Cum of
finish concrete) including providing side shuttering with MS channels, vibrating concrete by using
screed vibrator and suction dewatering using approved make equipmentand finishing the top
surface to required level and grade using powertrowels of standard make. Rate to include for 400 Cum 8000 3,200,000.00
covering the finished concrete surface with 200 micron thick polythene sheet and fixing of dowels
& PVC conduitcuring.(Reinforcement shall be measured and paid separetely.

16 Cutting 10mm x 15mm deep grooves in flooring and filling Polysulphyde in Joints as per the
directions of the Architects all complete. 1600 RM 240 384,000.00
17 Supplying and Mixing floor hardner of Fosroc make Nitoflor-Hardtop in the floor of approved make
@ 4Kg.Per Sq.m. (Specifications as per manufacturer) all complete as per the directions of the
Architects.Providing and laying Non-Metalic monolithic surface hardening
compound NITIFLOR Hardtop of M/s Fosroc or Equivalent over RCC/PCC floor with application
@ 4kg/m2for Tremix floor or as per manufacturer specifications. Abrassion resistance of 225%, 2500 SQM 225 562,500.00
shall confirm to IS:1237-1980 & Comprehensive strength of 60N/sqmm tested as per IS-516-1959

18 SUPPLY & APPLY- 3 mm THICKNESS (Epoxy Flooring) of following specifications -

Step 1: Surface preparation: Grinding of floor/ scarifying/ shot blasting, whichever suitable -
depending on surface and scraping off the previously filled material within the joints/cracks.

Step 2: Filling of construction joint/cracks with epoxy mortar. -

Step 4: Applying 2mm epoxy based self level screed.
The epoxy screed shall achieve a minimum compressive strength of 60 N/mm2, Flexural
strength of 20 N/mm2 and Tensile strength of 12 N/mm2 @ 7 days. The underlay shall have nil
water absorption when tested as per BS1881 Part 122-1983. The adhesion strength of the epoxy
underlay shall be greater than the tensile strength of concrete.
Step 5. Applying 1 mm Epoxy based self level top coat. Color - as per Architect/PM.
The topping shall achieve a minimum compressive strength of 45 N/mm2 and a flexural strength
of 22 N/mm2 at 7 days when tested to BS6319. At 25°C, it shall be capable of accepting foot
traffic at 24 hours and vehicular traffic at 48 hours.
Each component of the Epoxy Coating System shall be applied in compliance with manufacturer's
installation instructions including mixing and application methods, recoat windows, cure times and
environmental restrictions. Contractor shall be responsible for hiring an independent testing
service to test for moisture content and moisture vapor emission rate; install no flooring over
concrete until the concrete has been cured and is sufficiently dry to achieve permanent bond with
flooring as determined by material manufacturer's recommended bond and moisture tests.

Step 3: Applying one coat of epoxy primer. 1900 SQM 1574 2,990,600.00
Step 4: Applying 2mm epoxy based self level screed.The epoxy screed shall achieve a minimum
compressive strength of 60 N/mm2, Flexural strength of 20 N/mm2 and Tensile strength of 12
N/mm2 @ 7 days. The underlay shall have nil water absorption when tested as per BS1881 Part
122-1983. The adhesion strength of the epoxy underlay shall be greater than the tensile strength
of concrete.

Step 5. Applying 1 mm Epoxy based self level top coat. Color - as per Architect/PM.The topping
shall achieve a minimum compressive strength of 45 N/mm2 and a flexural strength of 22 N/mm2
at 7 days when tested to BS6319. At 25°C, it shall be capable of accepting foot traffic at 24 hours
and vehicular traffic at 48 hours.

Classification | Public
S.No Items Quantity Unit Rate Amount
Each component of the Epoxy Coating System shall be applied in compliance with manufacturer's
installation instructions including mixing and application methods, recoat windows, cure times and
environmental restrictions. Contractor shall be responsible for hiring an independent testing
service to test for moisture content and moisture vapor emission rate; install no flooring over
concrete until the concrete has been cured and is sufficiently dry to achieve permanent bond with
flooring as determined by material manufacturer's recommended bond and moisture tests.

Material Consumption- 3 mm thick epoxy

a) Primer (200 Micron) - 0.15 Kg /Sqmt
b) Screed (2000 micron) - 3.2 kg/Sqmt
c) Top Coat (800 Micron) - 1.4 kg/Sqmt
Total material consumption 4.75 Kg/Sqmt to achieve a thickness of 3000 micron
TOTAL CARRIED OVER TO SUMMARY OF COST : RS. 7,787,100.00
G. Finishing :
19 12 to 18 mm thick Plastering in 1: 3 : 2 Cement Mortar (1 cement: 3 Fine sand : 2 Coarse sand),
at all heights / levels. 125 SQM 350 43,750.00
20 20 mm thick Water Proof Cement Plastering in 1:2:2 Cement Mortar (1 cement: 2 Fine sand : 2
Coarse sand) with water proof compound mixed as per directions of the engineer incharge in
sunken slabs finished with neat cement all complete as per the directions of the Architects 10 SQM 400 4,000.00

21 6 mm cement plaster to ceiling of mix 1:4 (1 cement :4 fine sand). at all heights / Levels 0 SQM 350 -
Extra for groove in plastered surface 0 SQM 380 -
22 Finishing wall & ceiling surfaces with Oil Bound Distemper of approved shade and make on New
work (three or more coats with a priming coat) including preparation of base with necessary putty 100 SQM 250 25,000.00
made out of POP- Chalk mitti and enamel etc.
23 Finishing walls with Apex Exterior Emulsion paint from Asian Paints or approved equivalent of
required shade including preparation of base with 1 layer of Birla wall care Putty on New work 150 SQM 300 45,000.00
(Two or More coats over a priming coat.) all complete.
24 White washing with lime to give an even shade: New work (two or more coats) all complete as
per standard specifications 10 SQM 150 1,500.00
25 Painting with synthetic enamel paint of approved shade and make to give an even shade: Two or
more coats (each coat of DFT average 50 micron (min 35 Micron) & overall DFT 150 micron) on
new work in all shades over an under coat of suitable shade with ordinary paint of approved 250 SQM 200 50,000.00
Brand and manufacturer
26 Providing and fixing/erection of Barricading/temporary partition with necessary MS framework and
cladding with color coated MS Sheet upto a height of 5 meters with cup lock system. Contractor
can take back the barricading materials after completion of works at site 180 SQM 950 171,000.00

27 Providing / Fixing 8-12mm thick Matt finish tile dado with 12 mm thick base mortar 1:3 (1 cement:
3 fine sand) with white cement grouting mixed with pigment of matching shade including 12-18
mm thk. Base Plaster 1:4 (1cement:4coarse sand) all complete as per the directions of architect.
(Make as per list of approved makes)

Tile- upto the size of 300x600 mm, (Cost Of Tile At Site Inclusive Of All Taxes And Freight Rs-
60/- Per Sq.Ft.) 100 SQM 1500 150,000.00
29 Providing and Fixing of following sizes of vitrified tiles with average 10 to 12mm thick tile flooring
(including skirting) with 12 mm thick tile of approved make of Architect’s choice with 10-20 mm
thick necessary adhesive required as Per Standard Specifications. All are complete as per the
directions of The Architects. with or without 4mm Spacer with necessarily approved tile grouting
mixed with the pigment of matching shade all complete as per standard specifications. Tile can
be of any finish Matt/Satin/Double charged/antiskid/antistatic including 100mm wide skirting. 60 SQM 1850 111,000.00
Make of adhesive - MYK Laticrete 335 or equivalent.NOTE : tile can be of any finish
Matt/Satin/Double charged/antiskid/antistatic. (Cost Of Tile At Site Inclusive Of All Taxes And
Freight Rs-60/- Per Sq.Ft.)

28 Providing and Fixing 19 mm Thick Granite of approved color of required size in flooring, /Wash
basinSkirting/Dado with 50-60 mm thick base of Screed Concrete 1:2:4 & cement mortar 1:4 (1
cement: 4 coarse sand) with white cement grouting mixed with pigment of matching shade all 3 SQM 5200 15,600.00
complete. (Cost of Granite at site shall be Rs. 1200/= per Sqm including transportation, loading /
unloading, etc., and excluding GST)
29 Flush Door:-Providing and fixing of Solid doors shutters of 35-38 mm thick solid core shutters
with 1mm thick textured laminate of approved make shade as per design , having high quality
stainless steel door handle , locking mechanism, SS hinges, door closer, door stoper as per
approved and mellamine polished beading on edges as & whereever required, complete in all
respects. The door will be fixed on Hafele/Ozone/Yale Make fitting as SS Hinges, door stoper,
surface mounted door closer , lock mechanism with key ,door handle as approved etc. All
complete as per the directions of the Architects. (Basic Price 90/ sqft.) (Make as per list of approved makes)

Flush Door- Type A (In Primary/General Areas) 9 SQM 5500 49,500.00

30 Providing and Grouting GP2 of Fosroc make in Machine foundations, bases of columns etc.,
including cleaning, sealing the edges with C.mortar for grouting all complete(It is the responsibility
of the contractor to maintain the pedestal level with 20-50 mm average - 35 mm thick for grouting 5 SQM 3800 19,000.00
GP2. No extra payment what so ever shall be entertained in this regard) .

Classification | Public
S.No Items Quantity Unit Rate Amount
31 Providing and fixing two track powder coated aluminum windows in 16 gauge standard tubular
sections of approved make having two glazed panels of appropriate size running on two seperate
tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required
dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with
required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap
beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per
architectural drawings and the directions of Engineer-in-charge. All the panels shall be of
appropriate size having overlaps as required and including all required beadings, clips, rollers,
rubber gaskets, cleats, etc. complete and powder coating in approved shade and colour. For
shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making
provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene 15 SQM 4500 67,500.00
gasket as required. Anodised aluminium (anodised transparent or dyed to required shade
according to IS: 1868, Minimum anodic coating of grade AC 15) 500.00 SQM The work shall be
true in all repects like plumb and level having proper right angles and properly supported and
fixed in the walls/columns/adjoining supports. The cost shall include 4-5 mm thick reflective glass
of approved shade and colour and having ultra violet light protection. Glass shall be of reputed
brands like saint gobain, modiguard, etc. and colour and shade of both the glass and powder
coating shall be as per approval. The tasks shall include filling of gaps, etc. between the
aluminum sections and supports with appropriate means and materials

TOTAL CARRIED OVER TO SUMMARY OF COST : RS. 752,850.00

TOTAL COST ( A ) : RS. 14,088,985.00

Classification | Public
 PROJECT- ESCORT RM WAREHOUSE
INTERNAL & EXTERNAL PLUMBING ESTIMATE
S.NO DESCRIPTION UNIT QTY. RATE AMOUNT
A SANITARY FIXTURES ( PROVIDING & FIXING )

1.01 Providing and Fixing of white vitreous china Floor mounted type water closet as Each 3 19000.00 57000.00
aproved quality with TECE 8cm thick white exposed cistern 2/4 Ltrs flush and
front plate with soft close seat & cover having all internal fittings including C.P
bolts, nuts, hinges and rubber buffers, C.P brass screws and washers complete
including cutting and making good the walls floors where required as per
instruction of Engineer in charge. Basic Cost of -8000

1.02 Providing and Fixing of under counter Square / oval Wash basin having all Each 3 5600.00 16800.00
internal fittings including C.P bolts, nuts, hinges and rubber buffers, C.P brass
screws and washers complete including cutting and making good the walls floors
where required as per instruction of Engineer in charge. Basic Cost of -2500

1.03 Providing and fixing CP brass Self Closing Pillar Tap, having all internal fittings Each 3 4270.00 12810.00
including C.P bolts, nuts, hinges and rubber buffers, C.P brass screws and
washers complete including cutting and making good the walls floors where
required as per instruction of Engineer in charge. Basic Cost of -2000

1.04 Providing and Fixing Polypropylene Silent Bottle trap 32 mm dia. with 75 mm Each 6 2440.00 14640.00
clear water seal fitted with built-in Air Admittance valve of adequate capacity
with factory supplied extension piece. having all internal fittings including C.P
bolts, nuts, hinges and rubber buffers, C.P brass screws and washers complete
including cutting and making good the walls floors where required as per
instruction of Engineer in charge. Basic Cost of -900

1.05 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of Each 3 5100.00 15300.00
approved quality) complete with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete. Basic Cost of -2400

1.06 Providing and fixing P.V.C. flexible waste pipe for sink including P.V.C. waste
fittings complete. Basic Cost of -90
40 mm dia Each 1 275.00 275.00

1.07 Providing and Fixing chrome plated 2 way bib cock with flow rate of 1.3 Lps @ Each 3 3000.00 9000.00
45 PSI complete in all respect. having all internal fittings including C.P bolts,
nuts, hinges and rubber buffers, C.P brass screws and washers complete
including cutting and making good the walls floors where required as per
instruction of Engineer in charge. Basic Cost of -1000

1.08 Providing and Fixing chrome plated long body bib tap with flow rate of 1.3 Lps Each 1 1950.00 1950.00
@ 45 PSI complete in all respect. having all internal fittings including C.P bolts,
nuts, hinges and rubber buffers, C.P brass screws and washers complete
including cutting and making good the walls floors where required as per
instruction of Engineer in charge. Basic Cost of -900

1.09 Providing and fixing C.P. brass angle valve for wash basin and geyser points of Each 9 1800.00 16200.00
approved quality conforming to IS:8931. having all internal fittings including C.P
bolts, nuts, hinges and rubber buffers, C.P brass screws and washers complete
including cutting and making good the walls floors where required as per
instruction of Engineer in charge. Basic Cost of -800

1.10 Providing and fixing uplasticised PVC connection pipe with brass unions : Basic
Cost of -80
15 mm nominal bore Each 9 200.00 1800.00

Classification | Public
 PROJECT- ESCORT RM WAREHOUSE
INTERNAL & EXTERNAL PLUMBING ESTIMATE
S.NO DESCRIPTION UNIT QTY. RATE AMOUNT
1.11 Providing and Fixing of SS Double coat Hook including cutting and making good Each 4 1000.00 4000.00
the walls where required complete with all respect. having all internal fittings
including C.P bolts, nuts, hinges and rubber buffers, C.P brass screws and
washers complete including cutting and making good the walls floors where
required as per instruction of Engineer in charge. Basic Cost of -400

1.12 Providing and Fixing of ABS health spary which can tolerate water pressure up Each 3 2050.00 6150.00
to 6 bar flow pressure with metal hose and holder in Polished Chrome. having
all internal fittings including C.P bolts, nuts, hinges and rubber buffers, C.P brass
screws and washers complete including cutting and making good the walls floors
where required as per instruction of Engineer in charge. Basic Cost of -1000

1.13 Providing and Fixing straight /offset type single body push fit type WC pan Each 4 1150.00 4600.00
connector with factory supplied spring loaded seal guard of with integral single
mould sealing fins made of flexible EVA body, including bush/adaptor for use
with C.I. Pipe as supplied with the pan connector (if required). Basic Cost of -500

1.14 Providing and Fixing of SS Toilet paper holder with Flap including cutting and Each 3 1150.00 3450.00
making good the walls where required. having all internal fittings including C.P
bolts, nuts, hinges and rubber buffers, C.P brass screws and washers complete
including cutting and making good the walls floors where required as per
instruction of Engineer in charge. Basic Cost of -700

1.15 Providing and Fixing ABS Body soap dispenser 600ML complete, including Each 3 1770.00 5310.00
cutting and making good the walls where required. Basic Cost of -900

1.16 Providing and Fixing White vitreous china Urinal with intigrated automatic Each 3 36000.00 108000.00
flushing sensor (electric operated/battery operated)complete including painting
the fittings, cutting and making good the walls where required as per directions
of Engineer incharge. having all internal fittings including C.P bolts, nuts, hinges
and rubber buffers, C.P brass screws and washers complete including cutting
and making good the walls floors where required as per instruction of Engineer
in charge. Basic Cost of -20000

1.17 Providing and Fixing glass partition for urinal 450 x 800mm including fixing in Each 2 5500.00 11000.00
wall cutting wall and making goods including all fittings complete in all respect.
Basic Cost of -2800

1.18 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm Each 3 1450.00 4350.00
wide with minimum distances of 37 mm from wall face with concealed fittings
arrangement of approved quality and colour, weighing not less than 88 gms.
having all internal fittings including C.P bolts, nuts, hinges and rubber buffers,
C.P brass screws and washers complete including cutting and making good the
walls floors where required as per instruction of Engineer in charge. Basic Cost
of -600

1.19 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth Each 1 850.00 850.00
102mm, height of 75mm with concealed fitting arrangements, weighing not less
than 106 gms. having all internal fittings including C.P bolts, nuts, hinges and
rubber buffers, C.P brass screws and washers complete including cutting and
making good the walls floors where required as per instruction of Engineer in
charge.

TOTAL FOR SANITARY FIXTURE 293485.00

B SOIL, WASTE AND VENT PIPES

Classification | Public
 PROJECT- ESCORT RM WAREHOUSE
INTERNAL & EXTERNAL PLUMBING ESTIMATE
S.NO DESCRIPTION UNIT QTY. RATE AMOUNT
2.01 Providing, fixing & testing uPVC SWR pipes confirming to IS 13592 (Type B)
alongwith all required fittings like tees, bends, crosses with or without access
doors jointed with approved solvent cement as per manufacturer's
recommendations, fixed to walls and ceilings with clamps complete including
cutting and making good the floors and walls where required complete of outer
diameter.

a) 110mm Dia OD Metre 10 670.00 6700.00

Classification | Public
 PROJECT- ESCORT RM WAREHOUSE
INTERNAL & EXTERNAL PLUMBING ESTIMATE
S.NO DESCRIPTION UNIT QTY. RATE AMOUNT
2.02 Providing, fixing & testing uPVC pipes, conforming to IS 4985 class 3 (6 kg/cm 2)
including injection moulded fittings, jointing with solvent cement, cutting and
making good the floors and walls and jointing to trap/waste pipe, complete of
outer dia.

a) 40mm Dia OD Metre 7 485.0 3346.50

b) 50mm Dia OD Metre 1 550.0 632.50
c) 63mm Dia OD Metre 7 610.0 4209.00

2.03 Providing and fixing uPVC Floor Drain of 100 x 63mm, complete as per Each 5 1700.00 8500.00
instructions of the Engineer in charge.

2.04 Providing and Fixing multi trap min.-112mm of following size inlet and outlet
including cutting and making good the walls and floors wherever required
complete in all respects.
110x75x50mm outlet Each 1 1400.00 1400.00

2.05 Providing, fixing and testing of uPVC SWR P or S trap including jointing with Each 8 1750.00 14000.00
solvent cement and making good the walls, floors etc., complete of nominal size.

110x 110mm

2.06 Providing, fixing and testing of inlet fittings / Hight riser with two or three saddle Each 8 3660.00 29280.00
inlets of 32, 40 or 50 mm size, fabricated from 100 mm outer dia uPVC pipes and
fixed to uPVC traps with drip seal/m-seal/solvent cement joint complete in all
respect.

2.07 Providing and fixing 125 mm dia, 3 mm thick stainless steel grating with frame Each 13 670.00 8710.00
for floor traps or drains of required pattern including cutting and making good
the floors complete.

2.08 Providing & fixing uPVC clean out plug with suitable insert keys for opening in:
brass cap, male threaded joint with threaded uPVC socket fixed to uPVC pipe
joints as required complete in all respects.

a) 110mm dia. Each 5 2400.00 12000.00

TOTAL FOR SOIL, WASTE & VENT PIPES 88778.00

c COLD / HOT WATER SUPPLY (INTERNAL)

4.01 Providing, fixing, jointing and testing in position CPVC(chlorinated poly vinyl
chloride) confirming to IS 15778 SDR 11 for pipe upto 50mm dia and for Pipes
above 65 mm dia are as per ASTM F 441 SH 80 having thermal stability for UV
resistant, suitable for hot & cold water supply including all CPVC plain & brass
threaded fittings including fixing the pipe with clamps at 1.00m spacing . this
includes jointings of pipes & fittings with one step CPVC solvent cement and
testing of joints complete as per direction of engineer in charge.

Internal work-Exposed on wall

a) 15mm dia Metre 0 425.00 0.00
b) 20mm dia Metre 7 600.00 4200.00
c) 25mm dia Metre 7 730.00 5110.00
d) 32mm dia Metre 0 800.00 0.00
e) 40mm dia Metre 9 855.00 7695.00
f) 50mm dia Metre 0 900.00 0.00

Classification | Public
 PROJECT- ESCORT RM WAREHOUSE
INTERNAL & EXTERNAL PLUMBING ESTIMATE
S.NO DESCRIPTION UNIT QTY. RATE AMOUNT
4.02 Providing, fixing, jointing and testing in position CPVC(chlorinated poly vinyl
chloride) confirming to IS 15778 SDR 11 for pipe upto 50mm dia and for Pipes
above 65 mm dia are as per ASTM F 441 SH 80 having thermal stability for UV
resistant, suitable for hot & cold water supply including all CPVC plain & brass
threaded fittings including fixing the pipe with clamps at 1.00m spacing . this
includes jointings of pipes & fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same including testing of joints
complete as per direction of engineer in charge.

Concealed work including cutting chases and making the walls etc
a) 15mm dia Metre 26 420.00 11088.00
b) 20mm dia Metre 30 730.00 21681.00
c) 25mm dia Metre 11 850.00 9350.00
d) 32mm dia Metre 6 970.00 5335.00
e) 40mm dia Metre 2 1000.00 2400.00
f) 50mm dia Metre 0 0.00

4.03 Providing and fixing brass/bronze lever operated ball valve of full flow with
stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of
superior quality having minimum working pressure of 10 kg/cm2.

a) 15mm dia Each 0 2600.00 0.00

b) 20mm dia Each 1 4200.00 4200.00
c) 25mm dia Each 1 5500.00 5500.00
d) 32mm dia Each 0 6100.00 0.00
e) 40mm dia Each 1 7300.00 7300.00

4.04 Providing and fixing C.I butterfly valve, wafer end type class PN 1.0 as per
I.S:13095 or BS:5155, including necessary nuts, bolts, gaskets etc., complete .

a) 50 mm dia Each 1 40000.00 40000.00

4.05 Providing & fixing of 25mm dia. gunmetal air release valve with all fittings Each 2 2500.00 5000.00
complete as required and as per enclosed specification.

TOTAL FOR COLD / HOT WATER SUPPLY (INTERNAL) 128859.00

E EXTERNAL WATER SUPPLY

5.01 Providing and laying Chlorinated Polyvinyl Chloride CPVC(chlorinated poly vinyl
chloride) confirming to IS 15778 SDR 11 for pipe upto 50mm dia and for Pipes
above 65 mm dia are as per ASTM F 441 SH 80, having thermal stability for hot
& cold water supply including all CPVC plain &brass threaded fittings This
includes jointing of pipes & fittings with one step CPVC solvent
cement ,trenching ,refilling & testing of joints complete as per direction of
Engineer in Charge, including cost, conveyance, royalty,taxes, labour‐charge
trenching and refilling, etc

a) 50 mm nominal dia Pipes Metre 15 2500.00 37500.00

5.02 Providing and filling sand of grading zone V or coarser grade alround the CPVC
pipes of 100 mm thick in external work.
a) 50 mm nominal dia Pipes Metre 15 2200.00 33000.00

Classification | Public
 PROJECT- ESCORT RM WAREHOUSE
INTERNAL & EXTERNAL PLUMBING ESTIMATE
S.NO DESCRIPTION UNIT QTY. RATE AMOUNT
5.03 Constructing masonary chamber inside with 75 class designation brick work in
cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. Surface
box 100mm top diameter , 160 mm bottom diameter and 180 mm deep
( inside ) with chained lid and RCC top slab 1:2:4 (1 cement:2 coarse sand:4
graded stone aggregate 20mm nominal size) necessary excavation foundation
concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm
nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse
sand) 12mm thick finished with a floating coat of neat cement complete as per
standard design with F.P.S. bricks.

with common burnt clay F.P.S.(non module) brick of class designation 7.5
a) 60cm x 60cm x 90 cm Each 1 17000.00 17000.00

5.04 Providing & fixing of following sizes of butterfly valve of rating PN 16, wafer
type, in cast iron body with Ductile Iron disc, EPDM seal, SS single piece shaft,
conforming to IS-13095 of the following sizes complete with cast iron hand lever
companion flanges, bolts, nuts, washers & inserted rubber gaskets, as required
and as per enclosed specification.

a) 50mm dia Each 1 4800.00 4800.00

5.05 Providing and making connection to water main including cutting the existing
main line and fixing required fitting and joints including excavation, bailing out
water, back filling etc. complete in all respects.
a) 50 mm dia Each 1 3100.00 3100.00

TOTAL OF EXTERNAL WATER SUPPLY WORK 95400.00

Classification | Public
 PROJECT- ESCORT RM WAREHOUSE
INTERNAL & EXTERNAL PLUMBING ESTIMATE
S.NO DESCRIPTION UNIT QTY. RATE AMOUNT
F SEWERAGE SYESTEM

6.01 Excavating trenches of required width for pipes, cables etc. Including
excavation for sockets, and dressing of sides, ramming of bottoms, depth upto
1.5M including getting out the excavated soil, and then returning the soil
as required, in layers not exceeding 20 cms in depth including
consolidating each deposited layer by ramming, watering, etc. And disposing
of surplus excavated soil as directed within a lead of 50 m Hard/dense soil.

All kind of soil

a) Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia Metre 5 1100.00 5500.00

6.02 Extra for Excavation trenches for pipes, cables etc. in all kind of soil for depth Metre 2 2400.00 3600.00
exceeding 1.5m but not exceding 3m (Rate is over corresponding basic item for
depth up to 1.5m)

6.03 Supplying and laying of following size DWC HPDE drain pipes pipe ISI marked
along with all accessories like socket, bend, couplers etc. conforming to IS 16098
, Part II SN8 pipe complete with fitting and cutting,jointing etc.direct in ground
( below ground level) including Excavat refilling the trench, sand cushioning and
protective covering etc., complete as required and including testing by smoke
testing method complete as required in all respect.

a) 150 mm diameter Metre 170 485.00 82450.00

b) 200 mm diameter Metre 5 1000.00 5000.00

6.04 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10
graded stone aggregate 40 mm nominal size) allaround concrete. pipes including
bed concrete as per standard design :
a) 150 mm diameter Metre 170 850.00 144500.00
b) 200 mm diameter Metre 5 900.00 4500.00

6.05 Constructing brick masonry rectangular manhole 90x80 cm with 75 class

designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C.
top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded
stone aggregate 40 mm nominal size) inside plastering 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating
coat of neat cement complete as per standard design. Including Excavation,
Refilling etc. complete.

with common burnt clay F.P.S.(non module) brick of class designation 7.5
Inside size 600x600 mm and 450 mm deep including CI Cover with frame (light Each 18 12500.00 225000.00
duty as per IS:12592) 455x610 mm internal dimensions total weight of cover
and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame
15 kg)

6.06 Extra for depth for manholes

Size 60 x 60 cm up to 90cm.
with common burnt clay F.P.S.(non module) brick of class designation 7.5 Metre 5.4 7000.00 37800.00

Classification | Public
 PROJECT- ESCORT RM WAREHOUSE
INTERNAL & EXTERNAL PLUMBING ESTIMATE
S.NO DESCRIPTION UNIT QTY. RATE AMOUNT
6.07 Constructing Brick Masonry circular type manhole 0.91 m internal dia at bottom
and 0.56m dia at top with FPS bricks class designation 75 in cement mortar 1:4
(1 cement : 4 Coarse sand), inside cement plaster 12mm thick with cement
mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of of neat
cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded
stone aggregate 40mm nominal size) and making necessary channel in Cement
Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm
nominal size) finished with a floating coat of neat cement complete as per
standard design.

with common burnt clay F.P.S.(non module) brick of class designation 7.5
0.91m deep with SFRC cover and frame (heavy duty HD-20 grade designation) Each 1 35000.00 35000.00
560mm internal diameter conforming to I.S:12592, total weight of cover and
frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2
coarse sand: 4 graded stone aggregate 20mm nominal size) including centering,
shuttering all complete.

6.08 Extra depth for circuler type manholes 0.60 m internal dia ( at bottom ) beyond
0.91m to 1.67 m .
with common burnt clay F.P.S.(non module) brick of class designation 7.5 Meter 0.3 12000.00 3600.00

6.09 Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I.
Grating brick masonary chamber with bricks of class designation 75 and water
tight C.I. Cover with frame of 300x300 mm size (inside) the weight of cover to be
not less than 4.50 kg and frame to be not less than 2.70 kg as per standard
design including plaster (1:4) with a floating coat of neat cement.

180x150 mm size P type

with common burnt clay F.P.S.(non module) brick of class designation 7.5 Each 5 5200.00 26000.00
(cement mortar 1:4)

6.10 Providing orange colour safety foot rest of minimum 6mm thick plastic Each 7 700.00 4900.00
encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786
having minimum cross section as 23mm x 25mm and over all minimum length
263mm and width as 165mm with minimum 112mm space between protrude
legs having 2mm tread on top surface by ribbing or chequering besides
necessary and adequate anchoring projections on tail length on 138mm as per
standard drawing and suitable to with dtand the bend test and chemical
resistance test as per specifications and having manufacture's permanent
identification make to be visible even after fixing, including fixing in manholes
with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20mm nominal size) complete as per design.

Classification | Public
 PROJECT- ESCORT RM WAREHOUSE
INTERNAL & EXTERNAL PLUMBING ESTIMATE
S.NO DESCRIPTION UNIT QTY. RATE AMOUNT
6.11 Making connection of sewer line with existing manhole including breaking into
and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered
on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a
floating coat of neat cement and making necessary channels for the drain etc.
complete :

a) For pipes 150 to 300 mm diameter Each 1 6000.00 6000.00

TOTAL OF SEWERAGE SYESTEM 583850.00

Classification | Public
SR NO ITEM DESCRIPTION
A Civil work
1 Cement(OPC)
2 Ready Mixed Concrete
3 Structural steel
4 Reinforcement Steel
5 Flush Doors
6 Door Closer/Floor Spring
7 Paint (Including OBD)
8 Water-proof cement paint
9 Vitrified/White/Colored tiles

10 Coarse sand

11 Fine sand

12 Stone aggregate

13 Bricks
14 Al. frame for Windows/Partitions
15 Window glass (sheet/plate)

16 Water-proofing compound

17 Locks

18 Screws, Fasteners, washers etc (For Sheet Fixing)

19 Water Tanks (Over Head)

20 Laminate
21 Cement Bonded Particle board
22 Hardware knobs etc.
23 Surface Ceiling Compound
24 Welding Rod
25 PVC Rainwater Pipes
26 Wall Putty
27 White Cement
28 Dash Fasteners/Anchor Bolts
29 Plasticizer
30 Non-Shrink Grout
31 Expansion Joint Boards
32 Structural Paints
B Plumbing
1 Sanitay Fixture & CP Fittings
2 GI Pipes as per IS:1239
3 GI Fittings (Malleable Cast Iron) as per IS:1879
4 Butterfly Valve / Check Valve
5 Ball Valves

Classification | Public
6 Cables
7 Water Meter
8 PVC Copper Wire
9 uPVC Pipes & Fittings
10 CPVC Pipes & Fittings
11 PP PIPE
12 PP Fittings
13 RCC Pipes
14 Stainless Steel Grating
15 Air Release Valve
16 SW Gully Trap
17 Pumps
18 Filter & Softener
19 Chemical Dosing Pumps/Tanks
20 Level Controller / Lvel Censor
21 Vibration Eliminator

Classification | Public
MAKES

Ultratech, ACC, Ambuja

Ultra-tech/ ACC
JINDAL/ APOLLO
TATA, SAIL
Green Lam, Duro, Kit ply Industries
Dorma Ozone
Asian Paints, Nerolac
Snowcem, Shakti Cement Paint (Shalimar)
Somany, Kajaria
As IS:383 (Latest edition) from approved quarry

As IS:383 (Latest edition) from approved quarry

As IS:383 (Latest edition) from approved quarry

As per IS: 1077 from approved Kiln.
Jindal, Hindalco
Indo Asahi, Modi float, Saint Gobain
Cico, M.C. Banchemi, SicaQualerete, Aeronite
(Aero), Rofe, Vam Organic, Fosroc
Godrej, Dorset
HILTI (Screw Depth considering thickness of
Insulation)

Sintex or Approved equivalent (to be mentioned)

Century, Merino, Greenlam
Bison Panel
Dorset
Pidilite or equivalent (to be mentioned)
Advani (Ador) or Approved Equivalent
Supreme, Astral, Polypack, Jindal
Birla, JK
Birla White, JK
Hilti, Fischer, Bosch
Perma, Amines, Adeka
Fosroc
DURA Board (Supreme)
Nerolac, Nippon Paint, Asian Paints

Jaquar
Surya Prakash/ Jindal/ Tata
Zoloto / C Brand / NVR
Zoloto / Sant
Zoloto / Sant

Classification | Public
Polycab/ Finolex / Sky tone
Kranti / Kent
Polycab/ Finolex / Sky tone
Prince
Prince
Astral/ Poloplast
Astral/ Mcalpine
OM Spun Pipe/ BRHC/ KK spun pipe
Jayna/ Camry / Chilly
Zoloto/ Sant / Advance
Anand
Ebara/ Xylem / Lubi
Pentair/ Ion Exchane
Toshcon/ ASIA LMI/Edose
AIP /Danfoss / Flow line
Resistoflox, Noida/ Dwren - Calcutta

Classification | Public