Saes-J-002 - 2012

Engineering Standard
SAES-J-002
Technically Acceptable Instrument Manufacturers
8 January 2012
Document Responsibility: Instrumentation Standards Committee
Saudi Aramco DeskTop Standards

Table of Contents
1
Scope............................................................. 2
Conflicts and Deviations................................. 2
References..................................................... 2
Definitions....................................................... 4
General........................................................... 4
Technically Acceptable Instruments............... 5
Previous Issue: 14 May 2011 Next Planned Update: 26 June 2015

Revised paragraphs are indicated in the right margin
Primary contact: Juaib, Mohammed Khalifah on 966-3-8730222
CopyrightSaudi Aramco 2012. All rights reserved.
Page 1 of 32

SAES-J-002
Issue Date: 8 January 2012
Next Planned Update: 26 June 2015
Scope
This Standard identifies acceptable manufacturers for instrumentation products.
The Standard does not apply to replacement-in-kind or purchasing procedures
associated with instrument materials for replenishment of SAMS stock.
Conflicts and Deviations

2.1
Any conflicts between this standard and other applicable Saudi Aramco
Engineering Standards (SAESs), Materials System Specifications (SAMSSs),
Standard Drawings (SASDs), or industry standards, codes, and forms shall be
resolved in writing by the Company or Buyer Representative through the
Manager, Process & Control Systems Department, Saudi Aramco, Dhahran.
2.2
Direct all requests to deviate from this standard in writing to the company or
buyer representative, who shall forward such requests to the Manager, Process
and Control Systems Department of Saudi Aramco, Dhahran.
References
The following is a summary of the Saudi Aramco documents and industrial standards
that have been mentioned within this standard:
*
Saudi Aramco References

Saudi Aramco Engineering Standards
SAES-J-200
Pressure
SAES-J-400
Temperature
SAES-J-502
Analyzer Shelters
SAES-J-904
FOUNDATION fieldbus (FF) Systems
Saudi Aramco Materials System Specifications

34-SAMSS-117
Turbine Flow Meters
34-SAMSS-118
Positive Displacement Meters
34-SAMSS-318
Automatic Tank Gauging Equipment
34-SAMSS-319
Radar Tank Gauging Equipment
34-SAMSS-511
Chromatographs
34-SAMSS-512
Oxygen Analyzers
Page 2 of 32

SAES-J-002
34-SAMSS-514
Combustible Gas and Hydrogen Sulphide

Monitors
34-SAMSS-515
Moisture Analyzers
34-SAMSS-517
Density Meters
34-SAMSS-611
Safety Relief Valves Conventional and Balanced

Types
34-SAMSS-612
Safety Relief Valves Pilot Operated Types
34-SAMSS-619
Burner Management Systems for Watertube

Boilers
34-SAMSS-623
Programmable Controller Based ESD Systems
34-SAMSS-624
Wellhead Control, Monitoring and Shutdown

Systems
34-SAMSS-625
Vibration, Axial Position and Bearing

Temperature Monitoring Systems
34-SAMSS-634
Local ZV Shutdown Cabinets and Smart ZV

Systems
34-SAMSS-711
Control Valves - General Services
34-SAMSS-716
Pneumatic Actuators On-Off Service
34-SAMSS-717
Hydraulic Valve Actuators
34-SAMSS-718
Electric Motor Operated Valve Actuators
34-SAMSS-815
Annunciators
34-SAMSS-820
Instrument Control Cabinets - Indoor
34-SAMSS-821
Instrument Control Cabinets - Outdoor
34-SAMSS-830
Programmable Logic Controller
34-SAMSS-831
Instrumentation for Packaged Units
34-SAMSS-913
Instrumentation and Thermocouple Cable
Saudi Aramco Standard Drawings

AB-036019
Thermowell Assembly and Detail
AB-036094
Standard Orifice Plate
AC-036413
Orifice Flange Assembly, Raised Face
AB-036414
Orifice Flange Assembly, Ring Joint
Page 3 of 32

SAES-J-002
Definitions
Terms shown in bold font within this document are defined below:
Approval: Written authorization by the Manager, Process & Control Systems
Department, Saudi Aramco, Dhahran.
Acceptable: Approval is not required to place a purchase order for the product.
After the order has been placed, the supplier of this product must ensure that he
complies with all aspects of the purchasing contract (e.g., must meet the Saudi Aramco
Materials System Specification).
License agreement: A contract between a supplier and an owner of rights to an
equipment design, allowing a supplier to either (1) assemble the equipment using all
the pieces provided by the design owner or (2) assemble the equipment using a
combination of pieces provided by the design owner and pieces manufactured by the
licensee to the design owner's detailed drawings/specifications. The contract between
the licensor and licensee would (1) require the licensee to follow the licensor
manufacturing procedures and be routinely audited by the licensor for compliance and
(2) require the equipment to be marketed and labeled using the licensor's brand name.
Made: Created from raw materials and/or assembled by the manufacturer.
Manufacturer: Can be either (1) the owner of the brand name of the equipment or
(2) a licensee that has a license agreement.
SAMSS: Saudi Aramco Materials System Specification.
Supplier: The person/company, etc., who is responsible to provide the equipment to
Saudi Aramco.
General
5.1
Procurement of a product made by a manufacturer not listed in Section 6 of

this Standard is not allowed without approval. Requests for approval by the
Instrumentation Standards Committee Chairman of an alternate
manufacturer must be supported by documentation identifying how the
alternate manufacturer would better serve Saudi Aramco over the
manufacturers listed in this standard.
Commentary Note:
If the request to procure from an alternate manufacturer is not approved, the
approval authority is under no obligation to present the reasons for the refusal.
Page 4 of 32

SAES-J-002
5.2
5.3
The manufacturer listings within Section 6 shall be interpreted in the following

manner:
5.2.1
Manufacturer is listed with the word None as a Limitation:

All products from the manufacturer in the given category are
acceptable provided they meet the purchase specifications and the
applicable SAMSS. This does not include material of construction
which must be suitable for the specific application.
5.2.2
Manufacturer is listed with a Limitation: Only the product that meets

the Limitation is acceptable. If noted as being manufactured Under
License, only products made under the terms of the license agreement
are acceptable.
5.2.3
Manufacturer is listed with a specific Location: Only products made

in the specific location(s) or area(s) are acceptable.
For instrumentation purchases from manufacturers that are not listed in this
standard, a request for technical evaluation, with justifications, shall be
submitted in writing to the General Supervisor, Process Instrumentation
Division, P&CSD. The Instrumentation Unit/PID/P&CSD will evaluate the
subject instrument product for technical acceptability, and shall inform the
requestor in writing of the result. Only after the instrument has been identified
as technically acceptable, and the manufacturer's facility approved by Vendor
Inspection, can the purchase order be placed. These instrument products may or
may not be added to the technically acceptable manufacturer's list.
Technically Acceptable Instruments

100
Flow
111
Flow Transmitters
D/P Transmitters
See Category 211 - Pressure and Differential Pressure Transmitters
112
Flow Indicators
112.1
Equipment Description: Flowmeter, Variable Area, Rotameters

(9COM - 6000002916)
Refer to SAP System
Page 5 of 32

SAES-J-002
112.2
Flow Sight Glasses

(9COM - 6000002744)
Refer to SAP System
112.3
D/P Gauges
See Category 217 - Differential Pressure Gauges
113
Flow Switches
113.1
D/P Switches (9COM- 6000002830)

See Category 213 - Pressure and Differential Pressure Switches
113.2
Target Switches (9COM- 6000002831)
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
ITT-McDonnell and Miller
10019365
Chicago, US
SOR, Inc.
10021774
Kansas, US
SOR Europe
10001487
SW, UK
Magnetrol
30003796
Zele, Belgium
15
NOTES
Orifice Assemblies
115.1
Orifice Plates and Flanges

(9COM- 6000002792) - Orifice; Assembly: Plate; Flange; Sealing Ring
(9COM- 6000002793) - Orifice; Plate; ASTM A182/A240;
Mandatory requirements:
For orifice plates - Std. Dwg. AB-036094
For RF orifice flanges - Std. Dwg. AC-036413
For RJ orifice flanges - Std. Dwg. AB-036414
Refer to SAP System
115.2
Equipment Description: Orifice Fittings Retractable, Single and Dual

Chamber
(9COM- 6000010784)
Refer to SAP System
Page 6 of 32

SAES-J-002
116
Equipment Description: Flow Meter: Venturi Tube

(9COM- 6000007215)
Refer to SAP System
117
Equipment Description: Flowmeter; Turbine; In-Line for Process Metering

(9COM- 6000002775)
Specification: 34-SAMSS-117; IR342900
Refer to SAP System
118
Flowmeter; Positive Displacement for Process Metering; Bi-Rot

(9COM- 6000002722)
Refer to SAP System
120
Flowmeter; Annubar; Pitot Tube

(9COM- 6000002677)
Refer to SAP System
121
Flowmeter; Magnetic
(9COM- 6000002735)
Refer to SAP System
122
Ultrasonic Flowmeters*
122.1
Flow Meter: Ultrasonic; Liquid, Gas and Flare Line Service

(9COM- 6000002738)
* P&CSD pre-approval is required for clamp-on type
Refer to SAP System
122.2
Flowmeter; Multipath Ultrasonic for Process Metering; Gas Service

(9COM- 6000002777)
Refer to SAP System
Page 7 of 32

SAES-J-002
123
Flowmeter; Vortex; Vortex Shedding

(9COM- 6000002739)
Refer to SAP System
126
Thermal Flowmeters
(9COM- 6000002736) - Flow Meter/Switch: Thermal
VENDOR/
PLANT ID
LOCATION
Fluid Components International
30002423
San Marcos, CA, US
Brooks Instruments
30000079
Veenendaal, NL
Kurz Instruments
30003794
Monterey, CA, US
MANUFACTURER
127
NOTES
Flow Nozzles
(9COM- 6000002740) - Flow Nozzle
Refer to SAP System
128
Flowmeter; Coriolis Mass

(9COM- 6000002915)
Refer to SAP System
129
Specialty Flowmeters
129.1
Flowmeter; Specialty Flowmeter for Reduce Piping Requirements

(9COM- 6000002742)
MANUFACTURER
McCrometer
Cameron Measurement Systems/Hitol Co.,
Ltd.
VENDOR/
PLANT ID
LOCATION
30001590
Hemet, US
30005159
Seoul, KR
NOTES
DP Cone meters
only (NuFlo)
Page 8 of 32

SAES-J-002
200
Pressure
211
Pressure and Differential Pressure Transmitters

(9COM- 6000002850) - Transmitter: Flow
(9COM- 6000002851) - Transmitter: Pressure
Refer to SAP System
212
Pressure Gauges
(9COM- 6000002754) - Indicator: Pressure
Specification: Mandatory requirements are specified in SAES-J-200.
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
Ametek, Inc. (U.S. Gauge PMT)

WIKA Alexander Wiegand Gmbh
WIKA Instrument Corporation
Wika Middle East FZE
Dresser Al-Rushaid Valve
& Instrument/ Ashcroft
10016194
10032628
10023327
10029526
Feasterville, PA US
Klindgenberg, DE
Lawrenceville, USA
Dubai, AE
30000428
Jubail
Dresser Instrument Division, Ashcroft
10017721
Stratford, US
Dwyer Instruments, Inc. (Magnehelic)
10017797
Michigan City, US
213
NOTES
Pressure and Differential Pressure Switches

(9COM- 6000002830) - Switch: Differential Pressure
(9COM- 6000002834) - Switch: Pressure
VENDOR/
PLANT ID
LOCATION

10032628
10029526
Klindgenberg, DE
Dubai, AE
Barton Instrument Systems
30001183
Bognor Regis, UK
Custom Control Sensors, Inc.
10004389
Swindon, UK
Mercoid Corp.
10017798
Michigan City, US
SOR Europe
10001487
SW, UK
SOR, Inc.
10021774
Lenexa, KS, US
United Electric Controls
10022325
Watertown, MA, US
MANUFACTURER
NOTES
Page 9 of 32

SAES-J-002
214
Multivariable Transmitters
(9COM- 6000002926) - Transmitters Multivariable
Refer to SAP System
215
Remote Seals
(9COM 6000002693) - Chemical Seal
VENDOR/
PLANT ID
LOCATION
10016194
Feasterville, US

30001183
Bognor Regis, UK
30000428
Jubail

10017721
10032628
10029526
30004511
Stratford, US
MANUFACTURER
Emerson- Process Management
217
NOTES
Klindgenberg, DE
Dubai, AE
Wessling, DE
Differential Pressure Gauges

(9COM- 6000002749) - Indicator: Differential Pressure
VENDOR/
PLANT ID
LOCATION
ABB instrumentation SPA

ABB Automation Products Gmbh
ABB Kent-Taylor Inc.
ABB Automation Instrumentation
10004522
10015036
10018670
10018650
Lenno, IT
Minden, DE
Rochester, US
Warminster, US

30001183
Bognor Regis, UK
30000428
Jubail
10017721
Stratford, US
Dwyer Instruments, Inc.
10017797
Michigan City, US
Honeywell, Inc.
10019010
Phoenix, US
Meriam Instruments Div.
10021406
Cleveland, OH, US
10032628
Klingenberg, DE
10023327
Lawrenceville, USA
MANUFACTURER
NOTES
Page 10 of 32

SAES-J-002
300
Level
311
D/P Level Transmitters

See Category 211 - Pressure and Differential Pressure Transmitters
312
Level Gauge Glasses

(9COM- 6000002886) - Glass: Level Gauge
Refer to SAP System
313
Level Switches - Float and Displacer Type

(9COM- 6000002832) - Switch: Liquid Level
Refer to SAP System
314
Transmitter; Liquid Level; Displacer

(9COM- 6000002763) Level Instrument Displacer Type:
(Transmitters/Controllers; NA)
Refer to SAP System
315
Level Instruments - Ultrasonic

(9COM- 6000002762)
Refer to SAP System
316
Level Instruments Capacitance or RF Admittance

(9COM- 6000002761) - Level Control: Capacitance Type
Refer to SAP System
317
Level Instruments - Nuclear Radiation

(9COM- 6000002764) - Level Instrument: Radiation Type
Refer to SAP System
Page 11 of 32

SAES-J-002
318
Tank Gauging Equipment Servo and Float

(9COM- 6000002838)
Specification: 34-SAMSS-318
Refer to SAP System
319
Tank Gauging Equipment Radar (for inventory tank use only)

(9COM- 6000002822)
Refer to SAP System
320
Guided Wave Radar (GWR) Level Transmitters

(9COM- 6000007390) - Transmitter: Level; GWR
Refer to SAP System
321
Level Gauge- Magnetic Type (MLI)

(9COM- 6000002765) Gauge; Level; Magnetic
Refer to SAP System
Page 12 of 32

SAES-J-002
400
Temperature
411
Temperature Transmitters
(9COM- 6000002852) - Transmitter: Temperature
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
Emerson Process Management

Emerson Process Management Ltd
Emerson Rosemount Inc
10029032
10005275
10018041
Invensys Barcol-Air BV
10004767
Honeywell, Inc.
10019010
10004522
10024603
10015036
10018650
Phoenix, US
Yokogawa Electric Corp.
10001950
Musashino City, JP
10032628
Klindgenberg, DE
Endress+Hauser Wetzer Gmbh
10037950
Nesselwang, DE
Saudi Fal Company, Ltd.
10007457
Al-Khobar, SA
SMAR
10021582
Houston, US
412
NOTES
Wessling, DE
Worecester, GB
Eden Prairie, US
Purmerend, NL
Lenno, IT
Alzenau, DE
Minden, DE
Warminster, US
Temperature Indicators
(9COM- 6000002756) - Indicator: Temperature- Bimetallic and Expansion Types
Specification: Mandatory requirements are specified in SAES-J-400
MANUFACTURER
VENDOR/
PLANT ID
LOCATION

10016194
10004522
10024603
10015036
10018650
Feasterville, US
Lenno, IT
Alzenau, DE
Minden, DE
Warminster, US
Dresser Instrument - Ashcroft

10017721
10032628
10023327
Stratford, US
Rueger SA
30001251
Crissier, CH
NOTES
Klindgenberg, DE
Lawrenceville, USA
Page 13 of 32

SAES-J-002
413
Temperature Switches Mechanical

(9COM- 6000002835) - Switch: Temperature
VENDOR/
PLANT ID
MANUFACTURER
LOCATION
Custom Control Sensors, Inc.
10004389
Swindon, UK
Mercoid Corp.
10017798
Michigan City, IN, US
30001183
Bognor Regis, UK
SOR, Inc.
10021774
Lenexa, KS, US

WIKA Middle East
WIKA Gmbh
10022325
10029526
10032628
Watertown, MA, US
Dubai, AE
Klingenberg, DE
415
NOTES
Thermocouples
(9COM- 6000002888) Thermocouple
VENDOR/
PLANT ID
LOCATION

ABB Instrumentation, Ltd.
30001111
30003760
10029032
Alzenau, DE
Workington, GB
Wessling, DE
Minco Products, Inc.
10020168
Minneapolis, US
Thermo Electric Co, Inc.
30001963
Saddle Brook, US
Doedijns Thermo Electric BV

Gay Engineering and Sales Co.
(GAYESCO)
30001296
Waddinxveen, NL
10031229
Pasadena, TX, US
10022325
Watertown, MA, US
Conax Buffalo Technologies
10021385
Buffalo, US
Okazaki Manufacturing Co.
30001422
Chuo-Ku
10032628
Klindgenberg, DE
Rueger SA
30001251
Crissier, CH
MANUFACTURER
416
NOTES
Resistance Temperature Detectors

(9COM- 6000002814)
Refer to SAP System
Page 14 of 32

SAES-J-002
418
Thermowell
(9COM- 6000002845)
Refer to SAP System
500
Analytical
511
Analyzer; Chromatograph; Process Gas or Liquid

(9COM- 6000002914)
Refer to SAP System
512
Oxygen Analyzers
(9COM- 6000002666)
Refer to SAP System
513
pH Analyzers
(9COM- 6000002667) - Analyzer: pH
VENDOR/
PLANT ID
LOCATION
30001058
Stonehouse, GB
Foxboro Co.
30002059
Foxboro, US
GLI International
10018722
Milwaukee, US
30001465
Musashino-Shi, JP
Yokogawa Electric Kofu Plant
30003284
Kofu, JP
Horiba Instruments
10019060
Irvine, CA, US
Emerson - Rosemount Analytical Division
30001646
Irvine, US
Endress + Hauser Conducta GmbH +Co

KG
10039116
Gerlingen, DE
MANUFACTURER
NOTES
Page 15 of 32

SAES-J-002
514
Hydrogen Sulfide Monitors; Gas

(9COM- 6000002786)
Refer to SAP System
515
Moisture Analyzers
(9COM- 6000002664)
Refer to SAP System
516
Analyzer Shelters
(9COM- 6000002898)
Specification: SAES-J-502
Refer to SAP System
517
Density Meter; Gas and Liquid

(9COM- 6000002720)
Refer to SAP System
518
Gravitometers
(9COM- 6000002746) Gravitometer
Refer to SAP System
Page 16 of 32

SAES-J-002
520
BS&W Analyzers
(9COM- 6000002655) - Analyzer: Bottom Sediment and Water
VENDOR/
PLANT ID
LOCATION
Thermo Electron Corp.
30001630
Round Rock, TX, US
FMC Fluid Control/Invalco
10018327
Stephenville, US
Halliburton Energy Services
30001727
US
AGAR Corp.
30002049
Houston, US
ROXAR Flow Measurement AS
30003347
Stavanger, NO
Weatherford Production
30001629
Kingwood, US
Phasedynamics, Inc.
30005690
Richardson, US
MANUFACTURER
521
NOTES
Chlorine Analyzers and Chlorinators

(9COM- 6000002658) - Analyzer: Chlorine
Refer to SAP System
522
Combustible Gas Monitors

(9COM- 6000002782) - Monitor; Gas; Combustible
(9COM- 6000002787) - Monitor; Gas; Combustible; Open Path Type
Refer to SAP System
523
Conductivity Analyzers
(9COM- 6000002660) - Analyzer: Conductivity
VENDOR/
PLANT ID
LOCATION
30001058
Stonehouse, GB
Emerson - Rosemount Analytical Division
30001646
Irvine, US
Endress + Hauser Conducta GmbH +Co KG
10039116
Gerlingen, DE
Horiba
10019060
Irvine, CA, US
30001465
Musashino-Shi, JP
Yokogawa Electric Kofu Plant
30003284
Kofu, JP
MANUFACTURER
NOTES
Page 17 of 32

SAES-J-002
524
Continuous Emission Monitoring Analyzers

(9COM- 6000002663) - Analyzer: Furnace/Flue Gas
Refer to SAP System
525
FTIR/NIR Analyzers
(9COM- 6000002925) - Analyzer; NIR Spectrometer
Refer to SAP System
530
Process Color Analyzers

(9COM- 6000002659) - Analyzer: Color
VENDOR/
PLANT ID
MANUFACTURER
LOCATION
30001058
Stonehouse, GB
Ametek
30001481
Pittsburgh, US
Horiba
10019060
Metrisa, Inc.
10020215
Irvine, CA, US
25 Wiggins Avenue
Bedford, MA 01730
531
NOTES
Tunable Diode Analyzers

(9COM- 6000013921) - Analyzer: Tunable Diode (Extractive)
Refer to SAP System
532
Physical Property Analyzers

(9COM- 6000014021) - Analyzer: Physical Property
Refer to SAP System
533
Mercury Online Analyzers

(9COM- 6000014702) - Analyzer: Mercury
Refer to SAP System
600
Safety
605
Surge Relief Valves

Valve; Relief; Surge Relief Station
Page 18 of 32

SAES-J-002
605.1 Gas Loaded Surge Relief Valves

9COM-6000002896 - Valve; Relief; Surge Gas Loaded
Refer to SAP System
605.2 Pilot Operated Surge Relief Valves

9COM-6000012803 - Valve; Relief; Surge Pilot Operated
Refer to SAP System
611
Safety Relief Valves; Flanged, Conventional and Balanced Bellows

(9COM- 6000002869)
Refer to SAP System
612
Safety Relief Valves; Pilot Operated

(9COM- 6000002868)
612.1
For Processing Plants

Refer to SAP System
612.2
For Storage Tanks and Spheroids

Refer to SAP System
613
Valve; Vent Pressure Vacuum (For Tanks)

(9COM- 6000002867)
Refer to SAP System
614
Rupture Discs
(9COM- 6000002549) - Rupture Disc Assembly
Refer to SAP System
615
Flame Arrestors
(9COM- 6000002679) - Arrestor: Flame
Refer to SAP System
Page 19 of 32

SAES-J-002
616
Check Valve (for Gauge Glasses)

(9COM- 6000002680)- Valve: Backflow Preventer; for Instrument Installations
(9COM- 6000002854) - Valve: Check; Level Gauge Glass; Flow Shut-Off
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
Clark-Reliance-Jerguson Gage & Valve Co.
10019404
Strongsville, US
Tyco Flow Control-Penberthy, Incorporated
30002066
Prophetstown, US
Simco Engineers
10001569
Jarrow, UK
Cesare Bonetti
10003565
Garbagnate, IT
617
NOTES
Flame Monitoring Systems

(9COM- 6000002732); IR 345600
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
Hamworthy Combustion
Engineering
30001164
Poole, GB
ABB Instrumentation
30001252
Pero, IT
Fireye Electronics
30001599
Derry, US
Forney International
30001671
Carrollton, US
Honeywell, Inc.
30001743
Phoenix, AZ, US
619
NOTES
Burner Management Systems for Watertube Boilers

(9COM- 6000002723) - Emergency Shutdown System; Programmable Logic
Controller
Refer to SAP System
Page 20 of 32

SAES-J-002
624
Speed Sensors (RPM)

(9COM- 6000002820) - Sensor: Speed
MANUFACTURER
VENDOR/ PLANT ID
LOCATION
Woodward Governor
10001845
Rockford, IL, US
Bently-Nevada Corporation
30001527
Minden, US
SKF Condition Monitoring
30001915
Rockwell Automaiton-Entek (IRD)
30001908
San Diego, US
Milwaukee,
Wisconsin, US
625
NOTES
Vibration Monitors; Non-Contacting Type

(9COM- 6000002796)
Refer to SAP System
626
Monitor Systems; Temperature

(9COM- 6000002780)
Refer to SAP System
628
Shut Down Cabinets - Local, Electro-pneumatic

628.1
Cabinet: Shutdown, Local, Pneumatic and Electric without Partial

Stroke Test Feature
(9COM- 6000002684)
Refer to SAP System
628.2
Cabinet: Shutdown, Local, Pneumatic and Electric with Partial Stroke

Test Feature
(9COM- 6000002873)
Refer to SAP System
Page 21 of 32

SAES-J-002
628.3
Smart ZV Controller - Smart Valve Controller and Software that

provide the local control of Smart ZV with predefined Partial Stroke
Test Feature and local test pushbutton
(9COM- 6000010782)
Refer to SAP System
628.4
Smart ZV Assembly
(9COM- 6000002889) Assembly; Smart ZV Assembly per
34-SAMSS-634
Assembly; Smart ZV Assembly; Valve/Actuator Assembly with Local
Control Panel and Digital positioner; Does not include Valve.
Refer to SAP System
632
Vibration Monitors - Seismic Type

(9COM- 6000002875) - Vibration Monitoring System: Seismic
Refer to SAP System
635
Wellhead Shut Down Systems

635.1
(9COM- 6000003611)- Wellhead Emergency Shutdown System for

Multi-well Offshore Applications
Refer to SAP System
635.2
CCC: 451545 (9COM- 6000003727)- Panel: Hydraulic; SSV/ SSSV;

Single-Well Onshore Applications
Refer to SAP System
Page 22 of 32

SAES-J-002
635.3
(9COM- 6000003729)- ACTUATOR: Surface Safety Valve; Hyd; Self

Contained Actuator
Refer to SAP System
700
Valves
711
Control Valves; Globe

(9COM- 6000002861) - Valve: Control; Globe; including Actuator, Positioner
& Regulator
Refer to SAP System
712
Control Valves - Ball and Eccentric Plug (Characterized)

(9COM- 6000002858) - Valve: Control; Ball; including Actuator, Positioner &
Regulator
Refer to SAP System
713
Control Valves - Butterfly and Rotary Plug

(9COM- 6000002859) - Valve: Control; Butterfly; including Actuator,
Positioner & Regulator
Refer to SAP System
714
Control Valves - Severe and Non-General Service

(9COM- 6000002891) - Valve: Control; Non-General Service including
actuator, positioner and accessories
Refer to SAP System
Page 23 of 32

SAES-J-002
715
Control Valves; Angle

(9COM- 6000002855) - Valve: Control; Globe Angel; including Actuator,
Positioner & Regulator
Refer to SAP System
716
Valve Actuators; Pneumatic; On-Off

(9COM- 6000002899) - Actuator: For Operating On/Off Valve; Air/Nitrogen
Powered; Diaphragm Operated
(9COM- 6000002903) - Actuator: For Operating Valve; Pneumatic Piston
Refer to SAP System
717
Valve Actuators; Hydraulic and Electro/Hydraulic

(9COM- 6000002902)
Specification: 34-SAMSS-717 to purely hydraulic only
Refer to SAP System
718
Valve Actuators Electric

718.1
Electrical Actuators for Control Applications (including Fail Steady

electric operated ZV)
(9COM- 6000002901) - Actuator: For Operating Valve; Electric Motor
Refer to SAP System
718.2
Electrical Actuators for ESD/Wellhead Applications

9COM- 6000010821- Actuator: For Operating Valve; Electric Motor,
Fail Safe Design
Refer to SAP System
Page 24 of 32

SAES-J-002
719
Regulators - Pressure and Flow

(9COM- 6000002810) - Regulator: Pressure; Flow
Refer to SAP System
720
Regulators - Temperature
(9COM- 6000002811) - Regulator: Temperature
VENDOR/
PLANT ID
LOCATION
AMOT Controls Corp.
10003145
Bury St Edmunds, GB
ABB
10018670
Rochester, US
Leslie Controls Company
10017073
Tampa, US
MANUFACTURER
722
NOTES
Control Valves; Automatic Recirculation

(9COM- 6000002856)
Refer to SAP System
723
Control Valves; Desuperheating

(9COM- 6000002860) Valve: Control; Desuperheating; including Actuator,
Regulator, Positioner
Refer to SAP System
800
Panel Instrumentation
811
Controllers and Indicators Analog

(9COM- 6000002700) - Controller/Indicator: For Panel Mounting
Refer to SAP System
812
Recorders
(9COM- 6000002805) - Recorder: Chart
Refer to SAP System
Page 25 of 32

SAES-J-002
813
Indicators - Multi-point, Thermocouple

(9COM- 6000002753) - Indicator: Multi-point
Refer to SAP System
814
Recorders - Multi-point
(9COM- 6000002807) - Recorder: Multi-point
Refer to SAP System
815
Annunciator Panel: Solid State and Plug-In Module

(9COM- 6000002678)
Refer to SAP System
818
Controllers Field
(9COM- 6000002703) - Controller: Field
Refer to SAP System
820
Control Panels; Indoor; Cabinet Structure only; Does Not include integrators
(9COM- 6000002697)
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
Hoffman
10020718
2100 Hoffman Way,

Anoka, MN, US
Remal Factory
30000794
Alkhobar, SA
Rittal
30003116
Herborn
NOTES
Page 26 of 32

SAES-J-002
821
Control Panels; Outdoor; Cabinet Structure only; Does Not include integrators
(9COM- 6000002698)
VENDOR/
PLANT ID
MANUFACTURER
LOCATION
Hoffman
10020718
2100 Hoffman Way,

Anoka, MN, US
Remal Factory
30000794
Alkhobar, SA
Rittal
30003116
Herborn
822
NOTES
Cabinets; for Vibration Monitoring Systems

(9COM- 6000013781)
Specification: 34-SAMSS-821; Form 175-343100
Refer to SAP System
823
Cabinets; for PLC Systems

(9COM- 6000013922)
Specification: 34-SAMSS-821; Form 175-343100
Refer to SAP System
824
Single Loop Controllers

(9COM- 6000002706) - Controller: Microprocessor
Refer to SAP System
825
Relays - Electro-magnetic
(9COM- 6000002812) - Relay: Electro Magnetic
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
Tyco - Potter and Brumfield
10019820
Winston, US
Cutler Hammer
10017874
Milwaukee, US
Omron
10004446
Schaumburg, IL, US
Allen Bradley/Rockwell Automation
10021204
Brussels, Belgium
STPI Relais Electriques
10001463
Paris, FR
NOTES
Page 27 of 32

SAES-J-002
Relays Pneumatic
826
(9COM- 6000002813) - Relay: Pneumatic

MANUFACTURER
VENDOR/
PLANT ID
Emerson-Fisher Controls Co.
30001650
Fairchild Industrial Products Co.
10018199
Siemens- Moore Products
10002425
Marsh Bellofram
60007017
827
LOCATION
NOTES
Marshalltown, US
3920 West Point
Blvd. WinstonSalem, NC 27103
Yeovil
9 Castle Park Queens
Drive, Nottingham
NG2 1AH
Solenoid Valves
(9COM- 6000002871)- Valve: Solenoid Operated
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
10000358
Scherpenzeel, NL
10018037
Florham, US
10004648
Japan
Circle Seal Controls
10023208
Corona, CA, US
Maxseal (Thompson Valves)
10003159
Dorset, UK
Parker-Skinner Valve Division
10024829
New Britain, US
Versa Valves
10022525
Paramus, US
Automatic Switch Co. (ASCO)
828
NOTES
Transducers - Signal Conversion

(9COM- 6000002848) - Transducer: Signal Conversion
828.1
(I/P) Transducers
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
Emerson-Fisher Controls Co.

ABB - Kent Taylor, Inc.
Foxboro Co. (Invensys)
10018059
10029032
10018670
10018650
10016490
Marshalltown, US
Wessling, DE
Rochester ,US
Warminster, US
Houston, US
Dresser Flow Control
10004242
Uxbridge, GB
Dresser Al-Rushaid Valve And
30000428
Jubail, SA
Siemens Moore Process Automation
10002425
Yeovil, GB
NOTES
Page 28 of 32

SAES-J-002
828.2
E/I Transducers
VENDOR/
PLANT ID
MANUFACTURER
LOCATION
Foxboro Co. (Invensys)
10016490
Houston, US
Honeywell Sensing & Control
10019057
Freeport, US
Ametek-Rochester Instrument Systems
10002603
Dunfermline, GB
Moore Industries
10020228
North Hills, US
829
NOTES
Pilot Valves
(9COM- 6000002918) - Valve: Pilot
VENDOR/
PLANT ID
MANUFACTURER
Automatic Switch Co. (ASCO)

Versa Valves
830
LOCATION
10000358
Scherpenzeel, NL
10004648
Japan
10022525
Paramus, US
NOTES
Controller; Programmable Logic

(9COM- 6000002708)
Specification: 34-SAMSS-830, IR344000
Refer to SAP System
900
Installation
904
Foundation Fieldbus (FF) Power Supplies

9COM- 6000010825
Specification: Mandatory requirements are per SAES-J-904
MANUFACTURER
VENDOR/
PLANT ID
LOCATION
MTL/Relcom, Inc.
10005043
Luton, UK
Pepperl & Fuchs
10015196
Mannheim-Schonau, DE
NOTES
Page 29 of 32

SAES-J-002
905
Foundation Fieldbus (FF) Wiring Blocks

9COM- 6000010781
VENDOR/
PLANT ID
MANUFACTURER
LOCATION
MTL/Relcom, Inc.
10005043
Luton, UK
Pepperl & Fuchs
10015196
Mannheim-Schonau, DE
Moore Industries/Moore Hawke
10020228
North Hills, US
906
NOTES
Foundation Fieldbus (FF) Terminators

9COM- 6000010826
VENDOR/
PLANT ID
MANUFACTURER
LOCATION
MTL/Relcom, Inc.
10005043
Luton, UK
MTL/Relcom, Inc.
10001178
Demmel, NL
907
NOTES
Foundation Fieldbus (FF) Multi-Input Temperature Multiplexer

(9COM- 6000013000)
Specification: Mandatory requirements per SAES-J-904
MANUFACTURER
VENDOR/
PLANT ID
Emerson- Rosemount Division
30001655
Austin, TX, US
MTL
10005043
Luton, UK
Pepperl & Fuchs
10015196
Mannheim, DE
913
LOCATION
NOTES
Instrument Wire and Cable

(9COM- 6000000805)- Cable: Instrumentation & Thermocouple; per 34-SAMSS-913
(9COM- 6000002686) - Cable: Instrumentation & Control; per 34-SAMSS-913
Refer to SAP System
Page 30 of 32

SAES-J-002
914
Foundation Fieldbus Cables

(9COM- 6000013923)- Cable: for Foundation Fieldbus loops; per 34-SAMSS-913
Refer to SAP System
915
Tubing; Metallic
(9COM- 6000000028) - Tubing: Alloy
(9COM- 6000000068) Tubing Metallic; Stainless Steel
Refer to SAP System
916
Tubing; Heat Traced and Pre-Insulated, for Analyzers

(9COM- 6000014560) - Heat Traced and Pre-Insulated
Refer to SAP System
918
Cable and Support Tray

(9COM- 6000000744) - Cable Tray: Aluminum
(9COM- 6000000775) - Cable Tray: Fiberglass
Refer to SAP System
919
Valve: Instrument
(9COM- 6000000304) - Valve: Instrument
Refer to SAP System
920
Valve Manifolds for Instrument-Process Interface

(9COM- 6000002768) - Manifold: Instrument or Pressure
Note: Manifolds supplied by the approved transmitter manufacturers are acceptable.
Refer to SAP System
921
Air Filter Regulators

(9COM- 6000002809) - Regulator: Air-Filter
Refer to SAP System
Page 31 of 32

SAES-J-002
922
Tubing Fittings
(9COM- 6000000208) - Fitting: Tubing; 316 SS Flareless / Compression
Refer to SAP System
26 June 2010
12 December 2010
14 May 2011
8 January 2012
Revision Summary
Revised the "Next Planned Update." Reaffirmed the content of the document, and
reissued with minor revision.
Minor revision to reflect SAES-J-002/SAP synchronization activities.
Minor revision to limit suppliers of positioners to approved control valve manufacturers.
Minor revision to reflect SAES-J-002/SAP synchronization activities; to add two 9COMs for
(Mercury Analyzers and Pre-insulated tubing for analyzer) and to delete the 9COM for
flared tube fittings.
Page 32 of 32

Saes-J-002 - 2012

Uploaded by

Copyright:

Available Formats

Saes-J-002 - 2012

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Saes-J-002 - 2012

Uploaded by

Copyright:

Available Formats

Engineering Standard

Document Responsibility: Instrumentation Standards Committee

Saudi Aramco DeskTop Standards

Conflicts and Deviations................................. 2

Technically Acceptable Instruments............... 5

Previous Issue: 14 May 2011 Next Planned Update: 26 June 2015

Document Responsibility: Instrumentation Standards Committee

Conflicts and Deviations

Saudi Aramco References

FOUNDATION fieldbus (FF) Systems

Saudi Aramco Materials System Specifications

Turbine Flow Meters

Positive Displacement Meters

Automatic Tank Gauging Equipment

Radar Tank Gauging Equipment

Document Responsibility: Instrumentation Standards Committee

Combustible Gas and Hydrogen Sulphide

Safety Relief Valves Conventional and Balanced

Safety Relief Valves Pilot Operated Types

Burner Management Systems for Watertube

Programmable Controller Based ESD Systems

Wellhead Control, Monitoring and Shutdown

Vibration, Axial Position and Bearing

Local ZV Shutdown Cabinets and Smart ZV

Control Valves - General Services

Pneumatic Actuators On-Off Service

Hydraulic Valve Actuators

Electric Motor Operated Valve Actuators

Instrument Control Cabinets - Indoor

Instrument Control Cabinets - Outdoor

Programmable Logic Controller

Instrumentation for Packaged Units

Instrumentation and Thermocouple Cable

Saudi Aramco Standard Drawings

Thermowell Assembly and Detail

Standard Orifice Plate

Orifice Flange Assembly, Raised Face

Orifice Flange Assembly, Ring Joint

Document Responsibility: Instrumentation Standards Committee

Procurement of a product made by a manufacturer not listed in Section 6 of

Document Responsibility: Instrumentation Standards Committee

The manufacturer listings within Section 6 shall be interpreted in the following

Manufacturer is listed with the word None as a Limitation:

Manufacturer is listed with a Limitation: Only the product that meets

Manufacturer is listed with a specific Location: Only products made

Technically Acceptable Instruments

Equipment Description: Flowmeter, Variable Area, Rotameters

Document Responsibility: Instrumentation Standards Committee

Flow Sight Glasses

D/P Switches (9COM- 6000002830)

Target Switches (9COM- 6000002831)

ITT-McDonnell and Miller

Orifice Plates and Flanges

Equipment Description: Orifice Fittings Retractable, Single and Dual

Document Responsibility: Instrumentation Standards Committee

Equipment Description: Flow Meter: Venturi Tube

Equipment Description: Flowmeter; Turbine; In-Line for Process Metering

Flowmeter; Positive Displacement for Process Metering; Bi-Rot

Flowmeter; Annubar; Pitot Tube