Professional Documents
Culture Documents
2CV Series For 230 Vac Capacitor Start Motors and 2VR Series For 230 Vac Capacitor Start/Capacitor Run Motors
2CV Series For 230 Vac Capacitor Start Motors and 2VR Series For 230 Vac Capacitor Start/Capacitor Run Motors
Speed Sensitive
(cut in)
Environmentally Protected
Immune to moisture, dust, dirt,
shock and vibration.
Electrically Protected
Designed to filter out electrical noise, so there
is no concern of random switch malfunction.
Start Capacitor Discharge Resistor
Increase start capacitor life.
ADDITIONAL FEATURES
Silent Operation - no switch noise
Completely Solid-State with No Moving Parts. SINPAC
Switches have no physical constraints to affect their operation.
No wearing parts mean high cycling, no arcing contact.
Optional inductor for heavy duty operation.
Ambient 40 to 65C.
Operating Temperature: -40C to 65 C (-40 F to 149F) [for
Dimensions are for estimating only. Drawings for customer reference are available upon request.
16
230
Volts
Switch Rating
and Permissible
Maximum Start
Capacitor
Current (amps)
3
3
17
17
35
35
230
230
2CV-35-260
2CV-35-310
4-7-22035-15-UC1
4-7-22035-15-U01
260
310
70
70
15
15
5
5
25
25
50
50
230
230
2CV-50-260
2CV-50-310
4-7-22050-15-UC1
4-7-22050-15-U01
260
310
70
70
15
15
3
3
17
17
35
35
230
230
2VR-35-260
2VR-35-310
4-7-72035-15-UC1
4-7-72035-15-U01
260
310
70
70
15
15
5
5
25
25
50
50
230
230
2VR-50-260
2VR-50-310
4-7-72050-15-UC1
4-7-72050-15-U01
260
310
70
70
15
15
Typical
Maximum
Motor hp
Start
Circuit
Voltage
Catalog
Number
Part Number
Cut Out
Voltage
Typical
Cut In
Voltage
Typical
Package
Style
Selection
Motor hp ratings are typical. For an accurate selection procedure, measure start
capacitor current during a normal start or at locked rotor and select a SINPAC
Switch with higher maximum current rating than that measured.
1. Be sure switch series matches motor type.
2. Be sure switch voltage rating matches auxiliary (start) circuit voltage rating.
3. Selection can be based on actual measurement of start capacitor current or
two times the motor nameplate FLA rating.
4. Switch current rating must match or exceed the motor start capacitor current
requirements. Always select a SINPAC Switch with the next higher current
rating for:
a) High cycling applications.
Line Voltage
Compensation Charts
Induced voltage across the start winding
is directly proportional to motor speed
and line voltage. All SINPAC Switches
use this voltage to switch the start
capacitor out of the circuit. Your motor
with a SINPAC Switch must generate a
voltage greater than the switch cut out
voltage to assure cut out of the start
capacitor. Refer to charts below.
260
260V
Line Voltage
240
200
Caution: SINPAC Switches are line voltage compensated. Changes in the line
voltage will not effect system operation unless an overload condition causes
reduced running speed, along with reduced voltage on the start winding.
500
400
260
Line Voltage
2CV-35
2CV-50
Connect
to
Capacitor
Start
Motors
300
200
240
Wiring Diagram
SINPAC
Switch
Rating
180
6. Higher current switches can be used in place of lower rated switches of the
same series.
Catalog
Number
310V
220
260V,
310V
220
200
Cut In Voltage
2CV, 2VR-15
50/60 Hz, Typical
180
60
Not Applicable
70
80
90
100
110
230 Volts
2VR-35
2VR-50
Connect to
Capacitor
Start/
Capacitor
Run Motors
Not Applicable
CS Start capacitor, M Motor main winding, CR Run capacitor, ST Motor start winding
17