Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

LaserCutter Rotary Manual

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

My honorable user: we are very appreciative of your choice of using Cole series of
product, as well as your support and trust to the product of the Cole. The manual will
supply you the methods and skills of operating. Please read the operation manual carefully. This
manual is the supplement of laser engraving machine. Please refer to the laser engraving machine
instruction for the software use of auxiliary rotary device and other machine operation

.Brief Introduction of Laser Engraving Machine Auxiliary Rotary Device


Cole series laser engraving machine auxiliary rotary device is a new type designed
for clients requires. Its cabinet and applied and broke through the limit of planar engraving.
Its specially used for processing columned or irregular materials, such as cup, brush pen,
brush pot, instrument and so on. Stable performance and could work for a long continuous
time; adopt three phase stepping motor system, high precision; horizontal moving of light
knife depends on X-axis, Y-axis of rotary device circularly circumgyrate; no contiguity, no
mechanical distortion, elegant engraving effect; rapid speed, adopt CO2 laser tube as
engraving heat headstream and advanced computer digital control technic. Its a high-tech
digital control product which incorporates the machine and electricity together. The rotary
device is matching with all kind of our laser machine.

1. Product Characteristic:
Professional design ideas, customized for the users in different industries,
elegant appearance and practical.
Professional moving control design, adopt big power imported motor and good
transmission system, high speed and precision.
Flexible and simple operation, be applicable to engrave different height rotundity
and irregular materials.
Support format of software such as PLT, BMP (1bit), DXF, AI and so on. Could
engrave all kind of graphics and words (as same as plane engraving)

2. Applicable Materials
Nonmetal columned materials such as cup, brush pen, brush pot, instrument.

3. Processing Characteristic:
The laser engraving works with the characteristics of rapid speed, high precision and low
noise.

-1-

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

In the arts and crafts gift industry, it completely substitutes handcraft engraving for its good
precision, high efficiency and simple operation, meanwhile it saved time.

4. Main Technical Parameter Instruction:


Engraving Area

255mm/380mm/500mm

Engraving Diameter

100mm

Voltage

220V/50Hz

Other engraving parameter is as same as laser machine engraving parameter.

5. Composing Parts of Rotary Device


Rotary device is composed by two parts: transmission part and Supporting Part.
1> Transmission Part: The rotary device and machine use the same motor. When the
machine is working, the motor revolution of rotary device and machine is same. Its
precision is higher while engraving materials.
2> Supporting Part: The choice of models rotary device depends on the difference
model and size of the machine. Adopt transmission gear driving and rectangle base
crutching to stabilize the materials while engraving, and then achieve the perfect situation.
3> Transmission Part: three phase stepping motor, transmission gear, and strap.
Supporting Part: three claw chuck, base, tail seat.

. Structure Introduction of Laser Machine Auxiliary Rotary Device


1. Exterior of Equipment

Tail Seat
Base

Motor Part

Three Claw Chuck


Picture 1-1

-2-

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

2. Structure Introduction:
The new design ideas of laser machine rotary device incarnate perfectly in vision and
aesthetic. It adopts mechanism transmission thoery and unique blue print to achieve best
and biggest breadth while engraving.

3. Instruction of Rotary Device Spare Parts


1> Three Claw Chuck
K11 series short column three claw self-stabilization center chuck equip with a frontispiece
claw and an opposing claw. They could be used separately. The claw of K11A and K11C
chuck is composed by two parts. It adopts bolt connection and could adjust as frontispiece
claw or opposing claw to use. K11A equip with a separate claw which accords the
standard of GB4346-2002 (ISO3089). K11C equip with traditional structure separate claw.
We could supply the soft claw according to clients require. It could achieve perfect nipping
precision after process.

Picture 1-2
Structure Frame and Install Size

Picture 1-3

-3-

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

Technical Parameter:
UNIT: mm
Chuck Dia.

D1

D2

D3

H1

80

80

55

66

16

50

3.5

M6

100

100

72

84

22

55

3.5

M8

125

125

95

108

30

58

3.5

M8

130

130

100

115

30

60

M8

Holding Range:

Picture 1-4
Technical Parameter:
UNIT: mm
Chuck Dia.

Frontispiece Claw

Opposing Claw

A-A1

B-B1

C-C1

80

2-22

25-70

22-63

100

2-30

30-90

30-80

125

2.5-40

38-125

38-110

130

3-40

40-130

40-120

Instruction of Replacing Chuck:

Three claw chuck has two type: frontispiece claw and opposing claw. Each set has three
claws. The serial number 1, 2, 3 shows as picture:

Serial Number 1

Picture 1-5

-4-

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

The mark of the other two claws is 2 and 3. Please match the serial number before
installation when changed by spanner, or you couldnt install correctly. Install the claws in
turn: first, number 1; second, number 2; third, number 3. After install the claws, adjust the
tightness with spanner according to the size of the materials.

Three Claw
Chuck Spanner

Picture 1-6

Notes:

Clean the lipid in the chuck before installation.


Regular rinse and lubricate in use processing to keep chuck precision and extend use life.
Dont uses sinker knock on the materials after clamping the chuck to avoid affecting the
precision and destroying the parts.
2> Base and Tail Seat

Fixation Spanner

Picture 1-7
Base: Its function is for supporting. It must be achieve water level standard. Generally,
base has three types: big, middle and small
Tail Seat: Mainly use for peg processing materials while engraving, make the processing
materials circumvolve in concentric. After fixed the materials, turn the fixation spanner to
withstand the materials and fixup it.
3> Transmission Part

-5-

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

Transmission system adopts high quality round arc belt wheel structure. It has excellent
curving performance, the rate of elongation is small and be able to bear or endure aging.
Motor: Adopt Korean stepping motor to make sure the rapid speed and high precision
while engraving.
Belt: Adopt high performance belt made in Ningbo. It has excellent curving
performance. The rate of elongation is small and be able to bear or endure aging.
Gear Wheel: High precision processing by machine tool; the rigidity of aluminum
material is much hard; excellent anti-abrade.

. Installation of Laser Machine Auxiliary Rotary Device


1. Open the package and put the rotary device on the platform of the machine. Make sure
the rotary device is parallel with the frontispiece of the machine; itll be propitious to
engrave.
2. You must turn off the machine before installing the rotary device to avoid destroying the
machine.
3. Connect the aviation tie-in of rotary device to the aviation tie-in of machine. During
connection, aviation tie-in has blind-proof mouth; please connect according to the position
blind-proof mouth, show as picture:

Blind-proof Mouth

Picture 1-8

1-8

Picture 1-9
-6-

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

1. After connecting correctly, use the turnbuckle on the aviation screws tight to avoid
becoming flexible. Show as picture:

Transition Switch

Picture-2
2. Next step is turning the transition switch near the aviation tie-in to opposing direction.
When engraving the plane materials, transition switch is on the right or left side; when
engraving cylinder, turn the transition switch to opposing position, right or left side.
Transition switch has three levels. The transition switch is near aviation tie-in. Show as
Picture-2.
3. Adjust focus after all the things is ready. Its as same as the adjusting method of
engraving plane materials. Its a fixed value from the materials to laser head. Adjust the
focus by moving the platform up or down.
4. After adjusted the focus, use the spanner adjust the range of holding. Hold the object on
the head of the three claws and withstand by the tail seat. And parallel adjust the object.
When the laser head plumb with the object surface, the best focus is the distance from the
laser head to the highest point of the object.

. Use of Software
The software operation of engraving plane materials and using rotary device are same.
The only difference point is the parameter setting in the software.
1. Open the software, find machine setting under the file, show as Picture 2-1:

-7-

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

Picture 2-1
2. Click the machine setting

Picture2-2

3. Click the worktable in the machine setting; double click the Y-axis setting to open it.

-8-

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

Y Axis

Picture 2-3

Please revise the moving parameter in the equivalent calculation. Moving parameter
is used for adjusting the proportion of the image. Its adjustment is according to the size of
the round object. Measure the diameter of the object, and then calculate according to the
proportion formula: 24/4.5=object diameter/Y-axis. The value of Y-axis is the moving
parameter. Put it in the corresponding blank, click OK to save. The other parameter
setting is as same as before. It doesnt need to revise.

-9-

LASER MACHINE AUXILIARY ROTARY DEVICE OPERATION MANUAL

. Summarize and Notes


After finished adjusting the software and rotary device, guide the image to software, set
the speed and step space. Adjust the electric current to suitable value and now you could
engrave. Sometimes, putting the paper with water on the surface of the object will make
the engraving effect better.
Spare parts of rotary device: one set opposing claw of three claw chuck (three), one
spanner.
Notes:
1. When engraving, please dont let the laser head hit the head of chuck. Or itll cause the
engraving failure or laser departure phenomena.
2. If the gradient of the round object is big, you must find the parallelism of the object to
make it on the parallel level.
3. You must turn off the machine when transfer plane engraving to engraving with rotary
device..
4. Please pay attention to the wire to avoid burning by laser.
5. If the processing object is too big to engrave, please change for opposing claw
engraving.

The final explanation right of the manual owns by ColeTech.


Our company has the right to modify and change the contents of the manual
without further notice .
All rights reserved, copy version is prohibitive .
Specially declare

- 10 -

You might also like