J198 Farmasi Admin Building Bill PDF

B3.
1/1
Item
Description
Qty
Unit
Rate
Amount B$
Bill No. 3
ADMINISTRATION AND COMMON AREA BLOCK
PILING
CONCRETE PILES (ALL PROVISIONAL)
Note:
A
The quantities given for piling works are approximate

and payment will be made on the basis of actual
quantities of work executed.
Refer to the Specification and Trade Preambles for items

applicable to the piling works.
All piling works are to commence from reduced formation

level.
The rates shall be deemed to include additional costs

incurred in driving exploratory piles, which will be used
as working piles, in order to establish the fabrication
length of remaining driven piles.
Contractor is to submit sample and technical

specification for approval prior to ordering of materials.
Prices for concrete piles shall include for all

reinforcement.
Prestressed spun concrete piles
Providing and assembling piling equipment on the site;
dismantling and removing on completion
Item
12,000.00
12,000.00
4,840
28.50
137,940.00
220
No
16.00
3,520.00
220
No
15.00
3,300.00
220
No
15.00
3,300.00
for piling required in building substructure work

Supplying, transporting, handling, pitching and driving
prestressed spun concrete piles to an approved set
(measured from cut of level to the toe of the pile after
driven)
250mm diameter (In 220 No.)

Approved pointed mild steel pile shoe; fillet welding all
round to end of piles as detailed on Engineer's drawing
sheet no. 1005
to 250mm diameter pile

Cutting or breaking away heads of piles to required levels;
cleaning and bending projecting steel reinforcement into
position; removing excess lengths off site
250mm diameter
Forming pile head as detailed on Drawing No. 1005
including bush hammering internal surface of piles,
concrete filling, mild steel anchor bars, base plate and
links
250mm diameter with 650mm long anchor bar projection
To Collection
J198
160,060.00
B3.1/2
PILING
Item
Description
Qty
Unit
Rate
Amount B$
CONCRETE PILES (ALL PROVISIONAL)

Prestressed spun concrete piles
Providing and assembling all instruments, equipment,
kentledge material, etc.; test loading of piles; removing on
completion
A
B
test load first single working pile to minimum two times

working load as specified (working load 45 tonnes)
90
66.67
6,000.30
test load subsequent single working pile to minimum two

times working load as specified (working load 45 tonnes)
90
22.22
1,999.80
Submitting piling records duly signed by the Contractor

and the Superintending Officer as the work proceeds
C
piling records in triplicate of all piles
To Collection
J198
Item
8,000.10
B3.1/3
PILING
Item
Description
Qty
Unit
Rate
Amount B$
PILING Collection
From Page B3.1/1
160,060.00
From Page B3.1/2
8,000.10
To Bill No. 3 Summary

J198
168,060.10
Addendum No.1
B3.2/1
Item
Description
Qty
Unit
Rate
Amount B$
LOWEST SLAB & FOUNDATIONS

EXCAVATION
Notes
A
Excavating cuttings and filling to make up to finished

platform levels are measured under External Works and
Services.
Contrary to SMM, pipe sleeves and associated dowel

bars passing through sub-structure for mechanical,
electrical, plumbing and sanitary services installation are
not measured separately. The contractor is deemed to
have included in his rates and prices for the provision of
such pipe sleeves and dowel bars in the relevant
mechanical, electrical and plumbing installation works.
Excavating foundation trenches
not exceeding 2.00m deep
89
m3
3.50
311.50
115
m3
3.50
402.50
203
m3
3.50
710.50
214
m3
2.50
535.00
Item
3,000.00
3,000.00
m2
6.00
6,330.00
Excavating pits for pile caps, column or stanchion bases

and the like
D
not exceeding 2.00m deep

Selected excavated material consolidated in layers
filling to make up levels

Selected excavated material from soil heaps including all
double handling
filling to make up levels

SURFACE TREATMENT
RENTOKIL anti-termite treatment system / TERMIMESH
system complete with Ultra Marine grade TMA 725 S/S
mesh of 0.18mm thick highly flexible, high grade barrier
fixed with termiparge two part mixture consist of liquid and
dry component bonding cement / PREMESE 200 or other
equal and approved anti-termite treatment to be executed
by an approved/authorised firm (Contractor to fill in the
anti-termite treatment system in the following space
provided)
______________________________________________
_________________________; in accordance to
manufacturer's specification and printed instructions
to all soil in contact with the building structure

PLAIN INSITU CONCRETE WORK
Concrete Grade 15
Blinding
1,055
50mm thick
To Collection
J198
11,289.50
Addendum No.1
B3.2/1+1
Item
Description
Qty
Unit
Rate
Amount B$
REINFORCED INSITU CONCRETE WORK; IN

CONCRETE FRAMED STRUCTURES
Concrete Grade 30
Foundations
A
pile caps, column or stanchion bases and the like
To Collection
J198
109
m3
138.00
15,042.00
15,042.00
B3.2/2
Item
Description
Qty
Unit
Rate
Amount B$

Concrete Grade 30
Foundations
A
ground beams
98
m3
138.00
13,524.00
Ground slabs
B
125mm thick
500
m2
17.25
8,625.00
150mm thick
162
m2
20.70
3,353.40
175mm thick
m2
24.15
193.20
200mm thick
144
m2
27.60
3,974.40
16
m2
17.25
276.00
3,547
kg
1.25
4,433.75
394
kg
1.25
492.50
228
kg
1.25
285.00
7,932
kg
1.25
9,915.00
46
kg
1.25
57.50
Ground slabs; forming or laying to falls; including extra

labour
F
125mm thick
Mild steel bar reinforcement
10mm Links, stirrups and binders
in ground beams
in ground beams
High tensile steel bar reinforcement
10mm General straight and bent bars
in pile caps, column and stanchion bases and the like
in ground slabs
in ground beams
1,257
kg
1.25
1,571.25
in ground slabs
2,147
kg
1.25
2,683.75
in ground beams
1,623
kg
1.25
2,028.75

O
3,129
kg
1.25
3,911.25
in ground beams
1,158
kg
1.25
1,447.50

Q
7,920
kg
1.25
9,900.00
in ground beams
2,551
kg
1.25
3,188.75
8,786
kg
1.25
10,982.50

S
in ground beams
To Collection
J198
80,843.50
B3.2/3
Item
Description
Qty
Unit
Rate
Amount B$

Formwork
Vertical surfaces
A
pile caps, column and stanchion bases and the like
411
m2
14.50
5,959.50
ground beams
491
m2
14.50
7,119.50
16
m2
14.50
232.00
613
2.50
1,532.50
85
3.50
297.50
808
m2
0.60
484.80
Sloping surfaces; soffits of slabs, staircases and the like

C
generally
Edges and breaks in slabs and walls; soffits of walls, sides
of upstands, risers, open strings of stairs and the like
vertical
100mm - 200mm wide
100mm - 200mm wide; curved

SUNDRIES
Polythene sheet damp proof membrane; 250 micron (1000
gauge) thick; lapping and sealing joints
on blinded surfaces of excavation
To Collection
J198
15,625.80
Addendum No.1
B3.2/4
Item
Description
Qty
Unit
Rate
Amount B$
LOWEST SLAB & FOUNDATIONS Collection

From Page B3.2/1
11,289.50
From Page B3.2/1+1
15,042.00
From Page B3.2/2
80,843.50
From Page B3.2/3
15,625.80

J198
122,800.80
B3.3/1
Item
Description
Qty
Unit
Rate
Amount B$
FRAME
Concrete Grade 30
Isolated piers, columns, struts and the like
A
generally
177
m3
138.00
24,426.00
246
m3
138.00
33,948.00
29,245
kg
1.25
36,556.25
2,545
kg
1.25
3,181.25
17,743
kg
1.25
22,178.75
3,269
kg
1.25
4,086.25
33,778
kg
1.25
42,222.50
3,745
m2
14.50
54,302.50
2,383
m2
14.50
34,553.50
Beams, braces, cantilevers and the like

B
generally
in isolated columns, beams and lintols





Formwork
Vertical surfaces
piers, columns, stanchions struts and the like

Sides and soffits of beams and lintols; vertical sides; flat
soffits
strutting 3.50m - 5.00m high
To Collection
J198
255,455.00
B3.3/2
FRAME
Item
Description
Qty
Unit
Rate
Amount B$
FRAME Collection
From Page B3.3/1
255,455.00

J198
255,455.00
B3.4/1
Item
Description
Qty
Unit
Rate
Amount B$
UPPER FLOORS
Concrete Grade 30
Suspended slabs
A
100mm thick
43
m2
13.80
593.40
125mm thick
1,736
m2
17.25
29,946.00
150mm thick
302
m2
20.70
6,251.40
20,398
kg
1.25
25,497.50
1,908
m2
14.50
27,666.00
88
2.00
176.00
716
2.50
1,790.00

D
in suspended slabs, roofs, canopies and the like

Formwork
Flat surfaces; soffits of slabs and the like

vertical
not exceeding 100mm wide
100mm - 200mm wide
To Collection
J198
91,920.30
B3.4/2
UPPER FLOORS
Item
Description
Qty
Unit
Rate
Amount B$
UPPER FLOORS Collection

From Page B3.4/1
91,920.30

J198
91,920.30
B3.5/1
Item
Description
Qty
Unit
Rate
Amount B$
ROOF STRUCTURE
Concrete Grade 30
Suspended slabs
A
125mm thick
51
m2
17.25
879.75
106
m2
13.80
1,462.80
101
m2
20.70
2,090.70
781
kg
1.25
976.25
Gutter slabs
B
100mm thick
Gutter sides
150mm thick
in cover slabs, gutter slabs, shelves, sills and the like

275
kg
1.25
343.75
550
kg
1.25
687.50
773
kg
1.25
966.25
3,746
kg
1.25
4,682.50
157
m2
14.50
2,276.50
201
m2
18.00
3,618.00

G

Formwork

Vertical surfaces
Sides of gutter
ROOF STRUCTURE
Note
The Contractor is to price this section of works based on

any one of the brand of roof truss system stated in the
item description. The Contractor is required to specify,
initial and stamp chop the brand of roof truss system
(upon which his rates and prices are based on) for the
particular item of works in the space provided. Fixing of
the roof truss system shall be in accordance to
manufacturer's recommendation.
To Collection
J198
17,984.00
B3.5/2
ROOF STRUCTURE
Item
Description
Qty
Unit
Rate
Amount B$
ROOF STRUCTURE
BLUESCOPE LYSAGHT / HASMIT / INTERLINE or
other equal and approved (Contractor to fill in the
brand of roof truss system in the following space
provided)
_______________________________________ Roof
Truss System
Design, supply and install the whole of the galvanised mild
steel roof structure system for Administration and
Common Block complete with all necessary purlins,
rafters, hip rafters, valley rafters, wall plates, crossing or
strap bracing and other necessary fixing accessories;
including all necessary priming and painting finishes; all
fabricated, bolted, welded, connected and braced in
accordance to manufacturer's / supplier's
recommendation; all to Engineer and Superintending
Officer's approval
A
generally (roof area measured flat on plan)
To Collection
J198
952
m2
25.00
23,800.00
23,800.00
B3.5/3
ROOF STRUCTURE
Item
Description
Qty
Unit
Rate
Amount B$
ROOF STRUCTURE Collection

From Page B3.5/1
17,984.00
From Page B3.5/2
23,800.00

J198
41,784.00
B3.6/1
Item
Description
Qty
Unit
Rate
Amount B$
ROOF FINISH
CEMENT ROOFING
Cement and sand (1:3); waterproofed with specified
additive; finishing smooth
Roofing
A
50mm thick (average); finishing to falls
45
m2
10.00
450.00
61
6.00
366.00
200
6.00
1,200.00
23
6.00
138.00
63
14.00
882.00
22.00
132.00
45
m2
18.00
810.00
61
10.00
610.00
244
m2
18.00
4,392.00
19mm Skirtings; rounded top edge; angle fillet at bottom

B
500mm (average) high

19mm Lining to gutter sides; rounded top edge; angle fillet
at bottom
500mm (average) high

Lining to gutter soles 600mm wide
30mm (average) thick; finishing to falls



SPECIFIED SHEET MEMBRANE PANEL ROOFING
Notes

any one of the brand of materials for waterproofing
stated in the item description. The contractor is required
to specify, initial and stamp chop the brand of material
the materials shall be in accordance to manufacturer's
recommendation.
SIKALISTIC 450 / KEMSCREED BRUSHBOND /
FOSROC BRUSHBOND or other equal and approved
(Contractor to fill in the brand of material in the
following space
provided)_________________________ waterproofing
according to manufacturer's details
Membrane roof coverings
laying to falls or slopes on underbeds (measured

separately)
Membrane and all labour in skirtings
500mm (average) girth

Membrane and all labour in finishings to gutters to falls
top,sides and soles of gutters
To Collection
J198
8,980.00
B3.6/2
ROOF FINISH
Item
Description
Qty
Unit
Rate
Amount B$
PROFILED STEEL SHEET ROOF COVERINGS

Insulation work
'Rockwool' 50mm Thick 80kg/m3
A
laying over purlins under roof coverings
1,040
m2
11.00
11,440.00
1,040
m2
0.80
832.00
1,040
m2
1.75
1,820.00
1,040
m2
26.00
27,040.00
294
1.00
294.00
47
18.00
846.00
155
18.00
2,790.00
79
18.00
1,422.00
'BRC Weldmesh' galvanised roofmesh; well lapped

B
laying over and wiring to steel purlins

Aluminium foil faced building paper; well lapped
laying on meshwork under roof coverings

Notes

any one of the brand of materials for the steel roof
sheeting and accessories stated in the description. The
contractor is required to specify, initial and stamp chop
the brand of material (upon which his rates and prices
are based on) for the particular item of works in the
space provided. Fixing of the materials shall be in
accordance to manufacturer's recommendation.
0.53mm thick MULTIKLIP Multicote G6 finish /
LYSAGHT KLIPLOK / SPANLOK or other equal and
approved (Contractor to fill in the brand of material in
the following space provided)
_____________________________________________
roof steel sheeting and accessories; fixing all
according to manufacturer's details
Sheeting; with screwed or blind riveted side laps; fixing to
steel purlins or rails with self tapping screws and washers
roof coverings not exceeding 50 degrees pitch

Eaves closure
filling with PVC foam filler strips

Standard ridge cappings; fastening to sheeting ribs
405mm girth; twice times bent

Standard corner moulds; fastening to sheeting ribs
305mm girth; twice times bent

Standard parapet flashings; fastening to sheeting ribs
generally; turning down edge and notching to profile of

roof sheeting; including chasing into concrete or
brickwall; pointing with silicone
To Collection
J198
46,484.00
B3.6/3
ROOF FINISH
Item
Description
Qty
Unit
Rate
Amount B$
FINISHINGS
9mm thick GRC fascia board
Fascias
A
250 x 9mm; in one width
343
9.00
3,087.00
123
m2
4.00
492.00
EXTERNAL PAINTING
Notes
B

any one of the brand of painting stated in the item
description. The contractor is required to specify, initial
and stamp chop the brand of painting (upon which his
rates and prices are based on) for the particular item of
works in the space provided. Application of painting shall
be in accordance to manufacturer's recommendation.
SKK Biofine Satin / ICI DULUX / JOTUN or other equal
and approved (Contractor to fill in the brand of
painting in the following space provided) Preparing;
applying one
coat_____________________________sealer; two
coats ________________________________emulsion
paint on gypsum or similar board surfaces in
accordance to manufacturer's printed instructions;
colour and pattern to Architect's approval
Fascias and the like
generally
To Collection
J198
3,579.00
B3.6/4
ROOF FINISH
Item
Description
Qty
Unit
Rate
Amount B$
ROOF FINISH Collection

From Page B3.6/1
8,980.00
From Page B3.6/2
46,484.00
From Page B3.6/3
3,579.00

J198
59,043.00
B3.7/1
Item
Description
Qty
Unit
Rate
Amount B$
ROOF DRAINAGE
RAINWATER GOODS
Unplasticised PVC rainwater pipes and fittings; SS
141 Class B; jointing in accordance with the
manufacturer's instructions
Pipes; casting in reinforced concrete columns
A
200mm diameter
124
22.00
2,728.00
11
26.00
286.00
14
No
12.00
168.00
14
No
85.00
1,190.00
Pipes; laying in trenches; including all necessary

excavation; backfilling etc.
B
200mm diameter
Extra over for bends
200mm diameter pipes

Unplasticised PVC roof outlets
Roof outlets; screwed domical grating; luting flange for
finishes; setting in reinforced concrete slab; jointing to
downpipe
200mm diameter outgo; including adaptor for UPVC pipe
To Collection
J198
4,372.00
B3.7/2
ROOF DRAINAGE
Item
Description
Qty
Unit
Rate
Amount B$
ROOF DRAINAGE Collection

From Page B3.7/1
4,372.00

J198
4,372.00
B3.8/1
Item
Description
Qty
Unit
Rate
Amount B$
STAIRCASES
Concrete Grade 30
Beams, braces, cantilevers and the like
A
generally
m3
138.00
276.00
24
m3
138.00
3,312.00
54
m2
24.15
1,304.10
130
kg
1.25
162.50
967
kg
1.25
1,208.75
2,517
kg
1.25
3,146.25
227
kg
1.25
283.75
m2
18.00
144.00
39
m2
18.00
702.00
Steps and staircases including strings

B
generally
Landings
175mm thick

in steps, staircases, strings and associated landing

in steps, staircases, strings and associated landing


Formwork
strutting not exceeding 3.50m high

Sloping surfaces; soffits of slabs, staircases and the like
34
m2
18.00
612.00
42
m2
18.00
756.00
Sides and soffits of beams and lintols; vertical sides; flat

soffits
L
11
m2
18.00
198.00
19
m2
18.00
342.00
26
m2
18.00
468.00
305
4.00
1,220.00

vertical
N
over 300mm wide
100mm - 200mm wide
To Collection
J198
14,135.35
B3.8/2
STAIRCASES
Item
Description
Qty
Unit
Rate
Amount B$
STAINLESS STEEL
Raking balustrades; forged and welded together
Top rails
A
tubes 62mm diameter (SS 316)
58
48.00
2,784.00
22
No
20.00
440.00
145
35.00
5,075.00
56
No
15.00
840.00
No
85.00
170.00
54
No
40.00
2,160.00
No
15.00
90.00
Extra over rails for bends

B

Intermediate rails

Vertical support; 120mm long; welded to top rails and
balusters; including capping plates as shown in drawing
no. A-49
tubes 20mm diameter (SS 314); as shown in drawing no.

A-49
Balusters 630mm long
tubes; 100mm diameter (SS 314)


Decorative ring; welded to and around 100mm diameter
balusters (measured separately)
tubes; 12mm diameter (SS304)

Plates; welding to bottom of standards or balusters; for
bolting to concrete
122 x 50 x 6mm thick (SS 304)
54
No
15.00
810.00
160 x 50 x 6mm thick (SS 304)
No
15.00
30.00
112
No
6.00
672.00
23
m2
9.00
207.00
Expansion bolts
J
bolts 6mm diameter; not exceeding 75mm long

INTERNAL BEDS AND BACKINGS
Cement and sand (1:3)
Screeded beds to landings
20mm thick
Screeded beds to treads
20mm thick x 280mm wide
5.50
44.00
132
5.50
726.00
Screeded backings to risers

N
20mm thick x 150mm high
132
3.50
462.00
3.50
28.00
To Collection
J198
14,538.00
B3.8/3
STAIRCASES
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL INSITU FINISHINGS

Plastering in cement and sand (1:3) gauged with
plasticiser
13mm To soffits
A
not exceeding 3.50m above floor
10
m2
9.00
90.00
3.50m - 5.00m above floor
16
m2
9.00
144.00
13mm To sloping soffits of stairs

C
36
m2
9.00
324.00
3.50m - 5.00m above floor
90
m2
9.00
810.00
49
4.00
196.00
86
5.50
473.00
86
3.50
301.00
13mm To open strings

E
300mm wide extreme

EXTERNAL BEDS AND BACKINGS
Screeded beds to treads


INTERNAL TILE, SLAB AND BLOCK FINISHINGS
Notes

any one of the brand of homogeneous tiles and
laminated timber flooring stated in the item description.
The Contractor is required to specify, initial and stamp
chop the brand of homogeneous tile and laminated
timber flooring (upon which his rates and prices are
based on) for the particular item of works in the space
provided. Fixing of the homogeneous tiles and laminated
timber flooring shall be in accordance to manufacturer's
recommendation.
To Collection
J198
2,338.00
B3.8/4
STAIRCASES
Item
Description
Qty
Unit
Rate
Amount B$

MML / SEACERA / KIMGRES or other equal and
approved (Contractor to fill in the brand of
homogeneous tile in the following space provided)
__________________________ homogeneous tiles in
polished surface finish; 300 x 300mm x 8.5mm thick;
colour and pattern to Superintending Officer's
approval; laying with joints 3mm wide; fixing with
Dribond (Kemgrip) or other equal and approved
adhesive; on screeded beds or backings (measured
separately); pointing using matching colour grout
Landings
A
generally
11
m2
55.00
605.00
14
m2
29.00
406.00
132
15.00
1,980.00
98
17.00
1,666.00

matt. surface finish; 300 x 300mm x 8.5mm thick;
Landings
B
generally
Risers
150mm high
__________________________ homogeneous step
tiles in matt surface finish; 300 x 300mm x 8.5mm
thick; colour and pattern to Superintending Officer's
Treads
300mm wide
To Collection
J198
4,657.00
B3.8/5
STAIRCASES
Item
Description
Qty
Unit
Rate
Amount B$

polished surface finish; 300 x 300mm x 8.5mm thick;
Treads
A
300mm wide
38
17.00
646.00
m2
95.00
190.00
30.00
240.00
30.00
240.00
25.00
200.00
ALOMI 8.3mm thick Heavy Duty Laminate Flooring

with uniclick system and Aluminium Oxide Protective
Coating including standard underlay / TATEX 11013
silver high density sponge or other equal and
laminated timber flooring; colour and pattern to
Superintending Officer's approval; fixing with
approved adhesive; secret nailing; sanding after
laying
B
Flooring
Risers
240mm high
Treads
280mm wide
Extra over general tiling for special tiles
nosing bead tiles

EXTERNAL TILE, SLAB AND BLOCK FINISHINGS
Notes

any one of the brand of homogeneous tiles stated in the
item description. The Contractor is required to specify,
initial and stamp chop the brand of homogeneous tile
the homogeneous tiles shall be in accordance to
To Collection
J198
1,516.00
B3.8/6
STAIRCASES
Item
Description
Qty
Unit
Rate
Amount B$

__________________________ homogeneous tiles;
300 x 300mm x 8.5mm thick; colour and pattern to
Superintending Officer's approval; laying with joints
3mm wide; fixing with Dribond (Kemgrip) or other
equal and approved adhesive; on screeded beds or
backings (measured separately); pointing using
matching colour grout
Risers
A
150mm high
86
7.00
602.00
86
7.00
602.00
46
m2
4.00
184.00
106
m2
4.00
424.00
29
m2
4.00
116.00
Treads
B
300mm wide
INTERNAL PAINTING
Notes

description. The Contractor is required to specify, initial
SKK Biofine Intermatt/ ICI DULUX / JOTUN or other
equal and approved paint (Contractor to fill in the
brand of paint in the following space provided)
Preparing; applying one
coat_______________________sealer; two coats
______________________ emulsion paint in
Plastered surfaces
ceilings and beams; not exceeding 3.50m high
ceilings and beams; 3.5m - 5m high
open strings
To Collection
J198
1,928.00
B3.8/7
STAIRCASES
Item
Description
Qty
Unit
Rate
Amount B$
STAIRCASES Collection
From Page B3.8/1
14,135.35
From Page B3.8/2
14,538.00
From Page B3.8/3
2,338.00
From Page B3.8/4
4,657.00
From Page B3.8/5
1,516.00
From Page B3.8/6
1,928.00

J198
39,112.35
B3.9/1
Item
Description
Qty
Unit
Rate
Amount B$
EXTERNAL WALLS & CLADDING

Concrete Grade 25
Stiffeners
A
generally
m3
138.00
138.00
338
m2
17.25
5,830.50
kg
1.25
2.50
25
kg
1.25
31.25
1,818
kg
1.25
2,272.50
1,343
kg
1.25
1,678.75
m2
16.00
32.00
677
m2
16.00
10,832.00
15.00
90.00
143
12.00
1,716.00
1,645
m2
19.00
31,255.00
46
m2
46.00
2,116.00
Concrete Grade 30
Walls
B
125mm thick
in stiffeners
in stiffeners
in walls
in walls
Formwork
Vertical surfaces
stiffeners
walls, balustrades, planter sides and the like

PRECAST CONCRETE WORK
Concrete Grade 25
Lintols; with two 12mm diameter high tensile steel bar
reinforcement top and bottom and 6mm diameter mild
steel bar reinforcement at every 200mm intervals;
including stoolings and returned ends
150 x 150mm
Projecting sills; including formwork, fair finishes, angles,
ends and intersections
70 x 150mm
Common clay bricks in cement mortar (1:3)
Half brick thick; reinforcing every fourth course with mesh
reinforcement
walls
One and a half brick thick
walls
To Collection
J198
55,994.50
B3.9/2
Item
Description
Qty
Unit
Rate
Amount B$
Sundries
Damp proof courses; BS 743 type 5B; well lapped
A
horizontal; 102.5mm wide
136
2.50
340.00
SPECIALIST CONTRACTOR DESIGNED ALUMINIUM

WORKS
Notes
B
The Contractor is referred to Bill No. B3.10-Windows for

notes on the Specialist Contractor Design Aluminium
Works which are also applicable in this section.
All aluminium louvres works shall refer to Architectural

Drawing No. A-20a
WINTEC EL120 / TECHNAL - TOPAZE / QINYA - ST10
or other equal and approved (Contractor to fill in the
brand of material in the following space provided)
________________________ powder coated
aluminium eliptical fixed louvres system; as per
manufacturer's detail and specification and
Architect's approval
Eliptical fixed louvre
1100 x 900mm high overall ('30' At Ramp - Admin Block)
No
288.00
576.00
1400 x 1000mm high overall ('6' Left Side - Admin Block)
No
404.00
808.00
1400 x 3550mm high overall ('5' Front - Admin Block)
No
1,432.00
2,864.00
1500 x 830mm high overall ('28' Rear - Common Block)
No
359.00
718.00
No
432.00
1,728.00
1500 x 2400mm high overall ('29' Rear - Common Block)
No
1,037.00
2,074.00
1612 x 850mm high overall ('14' Right Side - Admin

Block)
No
395.00
1,580.00
No
490.00
1,960.00
No
1,210.00
1,210.00
No
1,383.00
1,383.00

Block)
No
882.00
882.00
1840 x 990mm high overall (trapezoridal shaped) ('9' &

'18' Left & Right Side - Common Block)
No
525.00
1,050.00
To Collection
J198
17,173.00
B3.9/3
Item
Description
Qty
Unit
Rate
Amount B$

WORKS
________________________ powder coated
Eliptical fixed louvre
A
B
C
1840 x 1160mm high overall (parallelogram shaped) ('10'

& '19' Left & Right Side - Common Block)
No
615.00
1,230.00
1940 x 3130mm high overall (trapezoridal shaped) ('12'

& '21' Left & Right Side - Admin Block)
No
1,749.00
3,498.00
2000 x 2090mm high overall (iregular shaped) ('11' & '20'

Left & Right Side - Admin Block)
No
1,613.00
3,226.00
3310 x 10650mm high overall ('13' Left Side - Common

Block)
No
11,633.00
11,633.00
3310 x 13700mm high overall ('23' Right Side - Common

Block)
No
14,965.00
14,965.00

Block)
No
16,603.00
16,603.00
48.00
144.00
62.00
186.00
40.00
160.00
52.00
312.00

________________________ powder coated
SUNBLOCK eliptical fixed louvre
D
E
F
STAINLESS STEEL
Railings; forged and welded together
Top rails
G

Top rails; curved

Intermediate rails

Intermediate rails; curved
To Collection
J198
51,957.00
B3.9/4
Item
Description
Qty
Unit
Rate
Amount B$
STAINLESS STEEL
Railings; forged and welded together
Bottom rails
A
40.00
80.00
52.00
156.00
Bottom rails; curved

B

Deco railing
30.00
120.00
tubes 25mm diameter; curved (SS 304)
42.00
294.00
59
135.00
7,965.00
6mm thick x 50mm wide (SS 304)
195
25.00
4,875.00
50mm square tube (SS 304); 800mm girth
No
40.00
120.00
Decorative ball
H
75mm diameter (SS 304)
No
60.00
120.00
50mm diameter (SS 304)
No
48.00
144.00
No
60.00
120.00
No
15.00
60.00
36
No
6.00
216.00
270.00
1,350.00
No
527.00
1,054.00
No
500.00
2,000.00

J

Plates; welding to bottom of standards or balusters; for
bolting to concrete
100 x 100 x 6mm thick (SS 304)

Expansion bolts
bolts 6mm diameter; not exceeding 75mm long

Sundries
Decorative railing as shown in Architect Drawing No: A11
and Structural Drawing No:M5

Decorative post 1950mm long; as shown in Architect
Drawing No: A11 and Structural Drawing No:M5

Decorative post 3700mm long; as shown in Architect
Drawing No: A10 & A11

Plates; welding to bottom of posts; for bolting to concrete
300 x 300 x 6mm thick (SS 304)
No
63.00
378.00
150 x 150 x 6mm thick (SS 304)
No
25.00
150.00
24
No
7.00
168.00
Expansion bolts
R
bolts 10mm diameter; 75 - 150mm long
To Collection
J198
19,370.00
B3.9/5
Item
Description
Qty
Unit
Rate
Amount B$
EXTERNAL WALLS & CLADDING Collection

From Page B3.9/1
55,994.50
From Page B3.9/2
17,173.00
From Page B3.9/3
51,957.00
From Page B3.9/4
19,370.00

J198
144,494.50
B3.10/1
Item
Description
Qty
Unit
Rate
Amount B$
WINDOWS
Concrete Grade 25
A
115 x 230mm
330
15.00
4,950.00
78
15.00
1,170.00
Projecting sills; including formwork, fair finishes, angles,

ends and intersections
B
115 x 230mm
WORKS
Notes

any one of the brand of materials for aluminium windows
stated in the item description. The Contractor is required
recommendation.
The Contractor is required to price separately the

component parts of the glazed aluminium works as
provided for in these Bills
Prices for aluminium works shall include everything for

the complete installation including all supports, fixing
accessories, flashings, cappings, matching hardware,
weather stripping opening lights, packing around and
into frames with cement mortar and pointing externally
with sealant properly caulked
Prices for glazing shall include everything necessary for

the complete installation including glazing beads,
gaskets, glass adaptors, setting blocks, and glazing
sealants
Prices for windows shall include for approved

ironmongery
The contractor shall check the whole of the dimension on

site and if any discrepency in or between the
specifications, drawings or instructions issued and
condition of site, he shall notify the Superintending
Officer immediately before proceeding with the works
All window works shall refer to Architectural Drawing No.

A-18 & A-19
To Collection
J198
6,120.00
B3.10/2
WINDOWS
Item
Description
Qty
Unit
Rate
Amount B$

WORKS
WINTEC 05XF / TECHNAL-TOPAZE / QINYA-ST10 or
_______________________________ powder coated
aluminium windows; including all necessary hinges,
lockset, ironmongery and accessories to
manufacturer's details
Window type W1
A
aluminium works to window size 1800 x 2200mm overall;

comprising 4 nos of swing panel each size 450 x
2200mm
No
2,587.00
10,348.00
glazing in 6mm thick blue tinted glass to window size

1800 x 2200mm overall
No
107.00
428.00

comprising 1 nos of fixed panel size 1500 x 2200mm
12
No
231.00
2,772.00

12
No
89.00
1,068.00

comprising 2 nos of top hung panel each size 500 x
700mm
No
128.00
1,024.00

No
19.00
152.00

comprising 2 nos of fixed panel each size 900 x 825mm
and 1 nos of swing panel size 600 x 1650mm
No
332.00
2,324.00

No
67.00
469.00

and 1 nos of swing panel size 600 x 1450mm
No
292.00
1,460.00

No
59.00
295.00

500mm
No
171.00
1,368.00

No
24.00
192.00
Window type W2
C
D
Window type W3
E
Window type W4
G
Window type W4b

I
Window type W5
K
To Collection
J198
21,900.00
B3.10/3
WINDOWS
Item
Description
Qty
Unit
Rate
Amount B$

WORKS
_______________________________ powder coated
Window type W6
A

comprising 1 nos of fixed panel size 1500 x 2100mm and
1 nos of fixed panel size 2000 x 2100mm
No
557.00
1,114.00
glazing in 8.38mm thick tinted laminated glass to window

size 3500 x 2100mm overall
No
845.00
1,690.00

19
No
353.00
6,707.00

19
No
580.00
11,020.00

No
177.00
354.00

No
290.00
580.00

and 2 nos of swing panel each size 750 x 1450mm
61
No
668.00
40,748.00

61
No
132.00
8,052.00

No
623.00
1,869.00

No
123.00
369.00
No
3,950.00
3,950.00
Window type W7
C
D
Window type W7a

E
F
Window type W8
G
Window type W8a

I
Window type W9
K

comprising 30 nos of fixed panel each size 800 x
1417mm and 4 nos of fixed panel each size 800 x
800mm
To Collection
J198
76,453.00
B3.10/4
WINDOWS
Item
Description
Qty
Unit
Rate
Amount B$

WORKS
_______________________________ powder coated
Window type W9
A

No
988.00
988.00

and 7 nos of fixed panel each size 800 x 900mm
No
1,317.00
1,317.00

No
363.00
363.00
aluminium works to window size 5600 x 2100.mm

overall; comprising 4 nos of fixed panel each size 800 x
1400mm; 10 nos of fixed panel each size 800 x 700mm
and 3 nos of top hung panel each size 800 x 700mm
No
1,407.00
1,407.00

No
318.00
318.00

No
665.00
665.00

No
167.00
167.00

No
440.00
880.00

No
110.00
220.00
Window type W10

B
Window type W11

D
Window type W12

F
G
Window type W12a

H
I
To Collection
J198
6,325.00
B3.10/5
WINDOWS
Item
Description
Qty
Unit
Rate
Amount B$

WORKS
_______________________________ powder coated
Window type W13
A
aluminium works to window u-shape on plan size 5600 x

11250mm overall; comprising 24 nos of fixed panel each
size 800 x 900mm; 6 nos of fixed panel each size 800 x
1450mm; 24 nos of fixed panel each size 800 x
1550mm; 8 nos of fixed panel each size 400 x 900mm; 2
nos of fixed panel each size 400 x 725mm; 4 nos of fixed
panel each size 400 x 775mm; 4 nos of fixed panel each
size 400 x 1550mm; 2 nos of swing panel each size 400
x 725mm and 4 nos of swing panel each size 400 x
775mm
No
7,258.00
14,516.00

No
1,701.00
3,402.00

1450mm; 20 nos of fixed panel each size 800 x
nos of fixed panel each size 400 x 725mm; 4 nos of fixed
panel 400 x 1550mm; 4 nos of fixed panel each size 400
x 775mm; 2 nos of swing panel each size 400 x 725mm
No
6,286.00
12,572.00

No
1,458.00
2,916.00
Window type W14

C
To Collection
J198
33,406.00
B3.10/6
WINDOWS
Item
Description
Qty
Unit
Rate
Amount B$

WORKS
_______________________________ powder coated
Window type W15
A
C
D

nos of fixed panel each size 800 x 1400mm; 2 nos of
fixed panel each size 800 x 1060mm; 2 nos of fixed
panel each size 800 x 500mm; 6 nos of fixed panel each
1600mm; 4 nos of fixed panel each size 400 x 2400mm;
2 nos of fixed panel each size 400 x 1900mm; 2 nos of
fixed panel each size 400 x 900mm; 2 nos of fixed panel
each size 400 x 750mm; 16 nos of top hung panel each
size 800 x 500mm and 2 nos of top hung panel each
size 800 x 560mm
No
6,528.00
6,528.00

400mm
No
123.00
123.00

No
1,420.00
1,420.00

No
15.00
15.00

900mm; 4 nos of fixed panel each size 700 x 1450mm
No
2,229.00
2,229.00

No
492.00
492.00

1000mm
No
864.00
864.00

No
216.00
216.00
Window type W16

E
Window type W16a

G
To Collection
J198
11,887.00
B3.10/7
WINDOWS
Item
Description
Qty
Unit
Rate
Amount B$

WORKS
_______________________________ powder coated
Window type W17
A

No
873.00
873.00

No
156.00
156.00

comprising 1 no. of top hung panel size 500 x 500mm
No
50.00
250.00
glazing in 6mm thick blue tinted glass to window size 500

x 500mm overall
No
7.00
35.00
Window type W18

C
D
To Collection
J198
1,314.00
B3.10/8
WINDOWS
Item
Description
Qty
Unit
Rate
Amount B$
WINDOWS Collection
From Page B3.10/1
6,120.00
From Page B3.10/2
21,900.00
From Page B3.10/3
76,453.00
From Page B3.10/4
6,325.00
From Page B3.10/5
33,406.00
From Page B3.10/6
11,887.00
From Page B3.10/7
1,314.00

J198
157,405.00
B3.11/1
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL WALLS
Concrete Grade 30
Lift walls
A
230mm thick
290
m2
31.74
9,204.60
6,623
kg
1.25
8,278.75
548
m2
16.00
8,768.00
76
6.00
456.00
1,592
m2
19.00
30,248.00
19
m2
46.00
874.00
87
2.50
217.50
707
No
1.00
707.00

B
in walls
Formwork
Vertical surfaces
lift walls
vertical
200mm - 300mm wide

Common clay bricks in cement mortar (1:3)
Half brick thick; reinforcing every fourth course with mesh
reinforcement
walls
One and a half brick thick
walls; building curved on plan

Sundries
Damp proof courses; BS 743 type 5B; well lapped
horizontal; 102.5mm wide

25 x 3mm Mild steel holdfasts; one end bent and twice
drilled and screwed to back of hardwood frame; other end
fanged and building into joint of brickwork
225mm girth
PROPRIETARY PRODUCTS
Notes

any one of the brand of toilet cubicle systems stated in
the item description. The Contractor is required to
specify, initial and stamp chop the brand of toilet cubicle
system (upon which his rates and prices are based on)
in the space provided. Fixing of the system shall be in
To Collection
J198
58,753.85
B3.11/2
INTERNAL WALLS
Item
Description
Qty
Unit
Rate
Amount B$
Toilet cubicle partitions as specified; including
partitions, pilasters, stabilisers, brackets, doors and
ironmongery
MARATHON 30 / PRO - CUBIX Jupiter (Contractor to fill
in the brand of toilet cubicle system in the following space
provided)____________________________________toil
et cubicles system; cubicles with front pilasters 1950mm
high; doors and divisions 1950mm high fixed clear of
floors; complete with 12mm compact water resistant board
with aluminium profile ironmongery, spring hinges, door
handles, indicators, door stops or other necessary fixing
accessories to manufacturer's fixing instructions colour to
Architect's approval; all shown and described in
Architectural drawing no. AGA/034/09 (A-43)
A
sets for range of four cubicles 4150mm wide overall x

1200mm deep with 150mm floor clearance; comprising
front pilasters with four doors and three divisions
Sets
3,000.00
3,000.00

Sets
3,000.00
3,000.00

Sets
3,000.00
3,000.00

Sets
3,000.00
3,000.00
sets for range of five cubicles 5000mm wide overall x

front pilasters with five doors and four divisions
Sets
3,750.00
15,000.00
To Collection
J198
27,000.00
B3.11/3
INTERNAL WALLS
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL WALLS Collection

From Page B3.11/1
58,753.85
From Page B3.11/2
27,000.00

J198
85,753.85
B3.12/1
Item
Description
Qty
Unit
Rate
Amount B$
DOORS
Concrete Grade 25
A
115 x 230mm
191
15.00
2,865.00
32
No
5.00
160.00
No
250.00
1,000.00
No
40.00
160.00
Heelstone cast to suit section of door frame; with 13mm

diameter mild steel dowel 100mm long let into concrete
and frame
B
140 x 45 x 100mm high

FLUSH DOORS AND PANELS
Hollow core doors and panels
Doors and panels; constructed with 100 x 25mm top,
middle, bottom and side frames, 50 x 25mm intermediate
frames; 25mm thick timber lipping all around; faced with
6mm thick plywood lined with waterproof laminate on both
sides and 6mm thick wired glass vision panel (glass
measured separately)
850 x 2100mm high (D8)

Forming glazing openings in 40mm flush doors; fitting with
glazing beads loosely pinned in on both sides
700 x 600mm high (D8)

SOLID DOORS AND PANELS
Nyatoh
Decorative single leaf doors and panels; all as shown and
described in Architectural drawing no. AGA/034/08 (A-17)
and Superintending Officer's approval
45mm thick doors; 850 x 2100mm high overall (D5)
17
No
400.00
6,800.00
17
No
418.00
7,106.00
19
No
280.00
5,320.00
Decorative double leaf door with 6mm thick clear viewing

glass panels (measured separately); all as shown and
described in Architectural drawing no. AGA/034/08 (A-17)
and Superintending Officer's approval
H
45mm thick doors; 1200 x 2100mm high overall (D4a)
14
No
705.00
9,870.00
45mm thick doors; 1700 x 2100mm high overall (Type

D4)
No
836.00
2,508.00
To Collection
J198
35,789.00
B3.12/2
DOORS
Item
Description
Qty
Unit
Rate
Amount B$
SOLID DOORS AND PANELS

Nyatoh
Decorative single leaf clear glass vision panel (measured
separately); all as shown and described in Architectural
drawing no. AGA/034/08 (A-17) and Superintending
Officer's approval
A
45mm thick doors; 850 x 2100mm high overall (D6a)
20
No
420.00
8,400.00
Forming glazing openings in 45mm flush doors; fitting with

glazing beads loosely pinned in on both sides
B
200 x 625mm high (D4a)
56
No
40.00
2,240.00
200 x 625mm high (D4)
12
No
40.00
480.00
200 x 625mm high (D6a)
40
No
40.00
1,600.00
No
750.00
3,750.00
No
40.00
200.00
525
13.00
6,825.00
525
19.00
9,975.00
FIRE DOORS
Notes
E
All fire rated doors must comply to manufacturer's details

and Fire Services Department requirement and approval
'MAICADOR' or other equal and approved One hour
fire rated doors, frames, hardwares and all
accessories to BOMBA requirement and approval
(ironmongery measured separately) complete with
6mm thick georgian rire glass vision panel (measured
separately); all as shown and described in
Architectural drawing no. AGA/034/08 (A-17) and
Superintending Officer's approval
Single leaf doors
45mm thick doors to suit structural opening 970 x

2160mm high overall (D7a)
Extra for glazing opening fitted with FR glass (measured
separately); fitting with glazing beads loosely pinned in on
bothsides
150 x 600mm high overall (D7a)

GROUNDS AND BACKINGS
Nyatoh
Grounds and backings for fixing joinery work
140 x 50mm
FRAMES
Nyatoh
Door frames
140 x 45mm
To Collection
J198
33,470.00
B3.12/3
DOORS
Item
Description
Qty
Unit
Rate
Amount B$
FINISHINGS
MDF board
Architraves
A
100mm x 16mm thick
1,201
8.00
9,608.00
79
No
115.00
9,085.00
14
No
51.00
714.00
336
No
10.00
3,360.00
12
No
10.00
120.00
DOOR IRONMONGERY
Notes
B

any one of the brand of ironmongery stated in the item
and stamp chop the brand of ironmongery (upon which
his rates and prices are based on) for the particular item
of works in the space provided. Fixing of the
ironmongery shall be in accordance to manufacturer's
recommendation.
Supplying and fixing ironmongery; to timber
Entrance locks
YANK L07 US32D & 7260 / BALING Y81M07-NLS /

ECOTILE H44R8Y, 200609S & 826935959 or other
equal and approved (Contractor to fil in the brand of
material in the following space
provided)_________________________ lever handle
complete with cylinder key and mortise lock and
masterkeying system
Lever handle
YANK L07-US32D / BALING Y81M07-NLS / ECOTILE

H44 R8Y or other equal and approved (Contractor to fill
in the brand of material in the following space provided)
___________________________________lever handle
Stainless steel ball bearing hinges
YANK 2043-2BB-US32D-304 / BALING Euro Master

SS304 3" x 4" x 2.5mm 4BB / CONCEPT H1102 or other
equal and approved (Contractor to fill in the brand of
provided)_______________________ stainless steel
ball bearing hinges
Cabinet hinges
YANK 2043-US32D / BALING / CONCEPT or other

provided)______________________cabinet hinges
To Collection
J198
22,887.00
B3.12/4
DOORS
Item
Description
Qty
Unit
Rate
Amount B$
DOOR IRONMONGERY
Supplying and fixing ironmongery; to timber
Flush bolts
A
YANK FBB-S box type 200/300mm / BALING Euro

Master G304 EM12 / CONCEPT 150/300 or other equal
and approved (Contractor to fill in the brand of material
in the following space
provided)_________________________ flush bolt
17
No
33.00
561.00
99
No
77.00
7,623.00
97
No
9.00
873.00
17
No
35.00
595.00
17
No
15.00
255.00
17
No
11.00
187.00
Surface mounted door closer

B
DORMA TS-68 / BALING TS-68 / CONCEPT 2022BC or

other equal and approved (Contractor to fill in the brand
of material in the following space provided)
_________________________________surface
mounted door closer
Door stops
YANK DS005CP / BALING Euro Master G304 EM002 /

CONCEPT 2893 or other equal and approved
(Contractor to fill in the brand of material in the following
space provided)
________________________________door stopper
Pull handle with Ball catch
YANK FP007 & BC001 / BALING Euro Master /

CONCEPT or other equal and approved (Contractor to
fill in the brand of material in the following space
provided) _________________________________
square shape flush pull handle 150 x 50mm with ball
catch
Concealed handle
YANK / BALING Euro Master G304 / CONCEPT

FRP70SS US32D or other equal and approved
space provided)
_________________________________ concealed
handle
Dust proof cover
YANK 1240CP / BALING Euro Master EMDC001 /

CONCEPT or other equal and approved (Contractor to
provided) _________________________________dust
proof cover
To Collection
J198
10,094.00
B3.12/5
DOORS
Item
Description

WORKS
Notes
A

any one of the brand of materials for aluminium doors
recommendation.
The Contractor is required to price separately the

component parts of the glazed aluminium works as
provided for in these Bills
Prices for aluminium works shall include everything for

the complete installation including all supports, fixing
accessories, flashings, cappings, matching hardware,
weather stripping opening lights, packing around and
into frames with cement mortar and pointing externally
with sealant properly caulked
Prices for glazing shall include everything necessary for

the complete installation including glazing beads,
gaskets, glass adaptors, setting blocks, and glazing
sealants
Prices for doors shall include for approved ironmongery
Prices for swing doors shall include for double action

floor springs, handles and locksets
The contractor shall check the whole of the dimension on

site and if any discrepency in or between the
specifications, drawings or instructions issued and
condition of site, he shall notify the Superintending
Officer immediately before proceeding with the works
All door works shall refer to Architectural Drawing No.

A-17
To Collection
J198
Qty
Unit
Rate
Amount B$
B3.12/6
DOORS
Item
Description
Qty
Unit
Rate
Amount B$

WORKS
WINTEC PAD 2008 / TECHNAL-TOPAZE / QINYA-ST10
_____________________________ powder coated
glazed frameless automate sliding door; complete
with approved automatic door operator system,
ironmongery and other accessories as per
Door type D1
A
aluminium works to door size 4800 x 2100mm overall;

comprising 1 no. of two way double leaf sliding doors
size 1800 x 2100mm; 1 nos. of fixed glass panel each
size 800 x 2100mm and 1 nos. of fixed glass panel each
size 1600 x 2100mm
No
5,850.00
11,700.00
glazing in 12mm thick tempered glass to sliding doors

and side view panel; complete with design sticker; 4800
x 2100mm overall
No
2,545.00
5,090.00

comprising 1 no. of double leaf swing doors size 1700 x
2100mm; 2 nos. of fixed glass panel each size 900 x
2644mm and 1 nos. of fixed glass panel each size 1700
x 544mm
No
2,538.00
2,538.00
glazing in 12mm thick tempered glass with design sticker

to door size 3880 x 2644mm overall
No
2,024.00
2,024.00

comprising 1 no. of double leaf swing doors size 1700 x
2100mm and 2 nos. of fixed glass panel each size 500 x
2100mm
No
2,042.00
4,084.00
glazing in 6mm thick clear glass with design sticker to

door size 3080 x 2144mm
No
530.00
1,060.00
WINTEC / TECHNAL-TOPAZE / QINYA-ST10 or other

material in the following space provided)
__________________________ powder coated
aluminium framed double swing door, completed with
approved ironmongeries and other accessories as per
Door type D2
C
Door type D3a

E
To Collection
J198
26,496.00
B3.12/7
DOORS
Item
Description
Qty
Unit
Rate
Amount B$

WORKS
WINTEC / TECHNAL-TOPAZE / QINYA ST-10 or other
________________________________powder coated
aluminium framed single swing door, completed with
approved ironmongeries and other accessories as per
Door type D9
A
aluminium works to door size 988 x 2144mm overall
10
No
658.00
6,580.00
glazing in 12mm thick tempered glass with design sticker

to door size 988 x 2144mm
10
No
503.00
5,030.00
No
601.00
2,404.00
WINTEC / TECHNAL-TOPAZE / QINYA ST10 or other

______________________________ powder coated
aluminium louvre door, completed with approved
ironmongeries and other accessories as per
Door type D10
C
aluminium works to door size 988 x 2144mm overall

GLAZING
6mm Float glass; clear
Glass and glazing to wood with wood beads; taking out,
easing, adjusting and refixing beads (beads measured
separately)
to glazing opening 200 x 625mm in door (D4a)
56
No
4.00
224.00
to glazing opening 200 x 625mm in door (D4)
12
No
4.00
48.00
40
No
4.00
160.00
6mm Georgian wired polished glass; clear

Glass and glazing to wood with wood beads; taking out,
easing, adjusting and refixing beads (beads measured
separately)
G
No
15.00
75.00
to glazing opening 700mm x 600mm in door (D8)
No
65.00
260.00
To Collection
J198
14,781.00
B3.12/8
DOORS
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL PAINTING
Preparing; priming only backs of woodwork before
fixing
Door frames, linings, architraves or other trims
A
not exceeding 100mm girth
1,201
1.00
1,201.00
100mm - 200mm girth
1,051
2.00
2,102.00
1,201
3.00
3,603.00
172
3.00
516.00
Notes
C

any one of the brand of materials for spray painting
particular item of works in the space provided.
Application of the materials shall be in accordance to
SKK Decolux / ICI DULUX / JOTUN or other equal and
approved painting (Contractor to fill in the brand of
material in the following space provided) Preparing;
priming; applying one ________________________
undercoat; two finishing coats of
________________________ paint on wood work all as
per manufacturer's specifications and colour to
Door frames, linings, architraves and other trims
100mm - 200mm girth

SKK / ICI DULUX / JOTUN or other equal and
sealing; applying two coats of
___________________________ cement paint on
gypsum or similar board surfaces all as per
manufacturer's specifications and colour to
100mm - 200mm girth
To Collection
J198
7,422.00
B3.12/9
DOORS
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL PAINTING
thrice staining; bodying in; varnishing
____________________ stained finish on woodwork
all as per manufacturer's specifications and colour to
Doors
A
generally
410
m2
9.00
3,690.00
526
3.00
1,578.00

B
200mm - 300mm girth
To Collection
J198
5,268.00
B3.12/10
DOORS
Item
Description
Qty
Unit
Rate
Amount B$
DOORS Collection
From Page B3.12/1
35,789.00
From Page B3.12/2
33,470.00
From Page B3.12/3
22,887.00
From Page B3.12/4
10,094.00
From Page B3.12/5

From Page B3.12/6
26,496.00
From Page B3.12/7
14,781.00
From Page B3.12/8
7,422.00
From Page B3.12/9
5,268.00

J198
156,207.00
B3.13/1
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL WALL FINISHES

FINISHINGS
Plasterglass
Beading
A
20 x 100mm
15
7.00
105.00
723
m2
8.00
5,784.00
2,301
m2
8.00
18,408.00
718
m2
29.00
20,822.00

Screeded backings to walls
B
20mm thick
INTERNAL INSITU FINISHINGS
plasticiser
20mm To walls
generally
Notes
Porcelain homogenous tiles in this section is defined as

ordinary porcelain homogenous tiles.

any one of the brand of materials for homogeneous tiles
recommendation.
__________________________ homogeneous glazed
tiles; 300 x 300mm x 8.5mm thick; colour and pattern
to Superintending Officer's approval; laying with
joints 3mm wide; fixing with Dribond (Kemgrip) or
other equal and approved adhesive; on screeded beds
or backings (measured separately); pointing using
Walls
generally
To Collection
J198
45,119.00
B3.13/2
Item
Description
Qty
Unit
Rate
Amount B$

NIRO GRANITE NICKELINE / MML / KIMGRES or other
___________________________________________
homogeneous tiles; 600 x 600mm x 8.5mm thick;
Dribond (kemgrip) or other equal and approved
Walls
A
generally
m2
47.00
235.00
53
m2
28.00
1,484.00
25
m2
32.00
800.00
INTERNAL SHEET FINISHINGS AND DRY LININGS

12.5mm thick 'ELEPHANT' Echo Bloc R-1 or equal and
approved acoustic wall with 6mm thick Gypsumboard
backings; fixing in accordance to manufacturer's
specification and Architect's approval
Linings; nailing with butt joints to 50 x 50mm timber
framing at 600 x 600mm centres horizontally and
vertically; supplying and fixing additional 50 x 50mm
timber noggings to support board ends as required
B
walls
6mm thick MDF board or other equal and approved
wallboards; jointing and finishing to give a flush
seamless surface ready for decoration
Linings; nailing with butt joints to 50 x 50mm timber
framing at 600 x 600mm centres horizontally and
vertically; supplying and fixing additional 50 x 50mm
timber noggings to support board ends as required
walls
To Collection
J198
2,519.00
B3.13/3
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL PAINTING
Notes
A

SKK Biofine Intermatt / ICI DULUX / JOTUN or other
applying one coat_______________________sealer;
two coats ______________________ emulsion paint
in accordance to manufacturer's printed instructions;
Plastered surfaces
walls and columns
2,301
m2
4.00
9,204.00
53
m2
4.00
212.00
15
1.00
15.00
25
m2
19.00
475.00
Gypsum and similar board surfaces

C
walls
Beading
100mm - 200mm girth

the following space provided) Preparing; applying one
______________________ glossy spray paint in
walls
To Collection
J198
9,906.00
B3.13/4
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL WALL FINISHES Collection

From Page B3.13/1
45,119.00
From Page B3.13/2
2,519.00
From Page B3.13/3
9,906.00

J198
57,544.00
B3.14/1
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL FLOOR FINISHES

FINISHINGS
Nyatoh
Skirtings
A
120 x 16mm thick
600
9.00
5,400.00
1,774
m2
9.00
15,966.00
382
2.00
764.00
37
m2
18.00
666.00

Screeded beds to floors
B
20mm thick
Screeded backings to skirtings

WORK IN CONNECTION WITH WATERPROOFING
Notes

any one of the brand of materials for waterproofing
stated in the item description. The contractor is required
recommendation.
SIKATOP 107 / KEMSCREED BRUSHBOND / FOSROC
BRUSHBOND or other equal and approved
(Contractor to fill in the brand of material in the
following space
provided)_________________________ waterproofing;
all in accordance with the manufacturer's printed
instructions
Membrane to concrete surfaces under floor screeds
sub-base to floors; including upturn to walls

Notes

To Collection
J198
22,796.00
B3.14/2
Item
Description
Qty
Unit
Rate
Amount B$

Notes
A

any one of the brand of homogeneous tiles and
laminated timber flooring stated in the item description.
chop the brand of homogeneous tile and laminated
timber flooring (upon which his rates and prices are
based on) for the particular item of works in the space
provided. Fixing of the homogeneous tiles and laminated
timber flooring shall be in accordance to manufacturer's
recommendation.
MML (Marble Silkwinds) / SEACERA / KIMGRES or
porcelain
homogeneous tiles in matt surface finish; 300 x
600mm x 8.5mm thick; colour and pattern to
Superintending Officer's approval; laying with joints
3mm wide; fixing with Dribond (Kemgrip) or other
equal and approved adhesive; on screeded beds or
backings (measured separately); pointing using
Flooring
generally
391
m2
42.00
16,422.00
382
7.00
2,674.00

porcelain
Skirtings; projecting from wall finish
C
100mm high
To Collection
J198
19,096.00
B3.14/3
Item
Description
Qty
Unit
Rate
Amount B$

MML Posh'e (PP02 Bone) / SEACERA / KIMGRES or
porcelain homogeneous
tiles in matt surface finish; 600 x 600mm x 8.5mm
thick; colour and pattern to Superintending Officer's
Flooring
A
generally
193
m2
44.00
8,492.00
87
m2
56.00
4,872.00
58
m2
56.00
3,248.00
MML Posh'e (SP02 Bone) / SEACERA / KIMGRES or

tiles in polished finish; 600mm x 600mm x 8.5mm
thick; white colour or other colour to Superintending
Officer's approval; laying with joints 3mm wide; fixing
with Dribond (Kemgrip) or other equal and approved
Flooring
B
generally
MML Posh'e (PP01 Black) / SEACERA / KIMGRES or
tiles in polished finish; 300 x 600mm x 8.5mm thick;
approval; laying with joint 3mm wide; fixing with
Flooring
generally
To Collection
J198
16,612.00
B3.14/4
Item
Description
Qty
Unit
Rate
Amount B$

ALOMI 8.3mm thick Heavy Duty Laminate Flooring
with uniclick system and Aluminium Oxide Protective
Coating including standard underlay / TATEX 11013
silver high density sponge or other equal and
laminated timber flooring; colour and pattern to
Superintending Officer's approval; fixing with
approved adhesive; secret nailing; sanding after
laying
Flooring
A
generally
20
m2
95.00
1,900.00
816
m2
30.00
24,480.00
208
m2
40.00
8,320.00
FITTED CARPETING
Notes
B

any one of the brand of carpet stated in the item
and stamp chop the brand of material (upon which his
works in the space provided. Fixing of the materials shall
"HERITAGE ASPECT SQ / GOODRICH / FASTRACK"
____________________ tiled carpet; 500 x 500 x 5mm
thick; colour and pattern to manufacturer's
specification and Superintending Officer's approval;
on screeded beds (measured separately)
Carpeting; laying on and including supplying specified
underlay
to floors; laid to pattern

"HERITAGE DC10 Discovery / GOODRICH /
FASTRACK" or other equal and approved (Contractor
to fill in the brand of material in the following space
provided) ____________________ rolled carpet with
underlay; colour and pattern to manufacturer's
specification and Superintending Officer's approval;
on screeded beds (measured separately)
Carpeting; laying on and including supplying specified
underlay
to floors; laid to pattern
To Collection
J198
34,700.00
B3.14/5
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL PAINTING
Preparing; priming only backs of woodwork before
fixing
Skirtings and the like
A
100mm - 200mm girth
600
1.50
900.00
600
3.00
1,800.00
Notes
B

SKK Decolux / ICI DULUX / JOTUN or other equal and
priming; applying one ________________________
undercoat; two finishing coats of
________________________ paint on wood work all as
per manufacturer's specifications and colour to
Skirtings and the like
100mm - 200mm girth
To Collection
J198
2,700.00
B3.14/6
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL FLOOR FINISHES Collection

From Page B3.14/1
22,796.00
From Page B3.14/2
19,096.00
From Page B3.14/3
16,612.00
From Page B3.14/4
34,700.00
From Page B3.14/5
2,700.00

J198
95,904.00
B3.15/1
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL CEILING FINISHES

Notes
A
Rates for suspended ceiling systems are deemed to be

include raking and circular cutting, forming openings for
fittings, diffusers, light fittings, speakers and the like,
small areas, narrow widths and any purpose made trim
at ceiling edges
Rates for ceiling are deemed to include for hangers of

any length and fixing hangers to concrete, brickwork,
timber or structural steelwork
9mm thick gypsum boards; jointing and finishing to
give a flush seamless surface ready for decoration; all
as per Architect's drawings and approval
Linings; including aluminium support system suspended
approximately 500mm below concrete soffit
ceilings; to finish not exceeding 3.50m above floor
sloping ceilings; to finish not exceeding 3.50m above

floor
210
m2
18.00
3,780.00
99
m2
18.00
1,782.00
169
m2
18.00
3,042.00

floor
190
m2
28.00
5,320.00
curved ceilings; to finish not exceeding 3.50m above

floor
m2
35.00
210.00
1,133
m2
28.00
31,724.00
29
m2
35.00
1,015.00
ceiling bulkheads; not exceeding 3.50m above floor

9mm thick plaster glass; jointing and finishing to give
a flush seamless surface ready for decoration; all as
per Architect's drawings and approval
F
G
H
curved ceilings; suspended average 1500mm

approximately below structural soffits; to finish 5.00m 6.50m above floor
To Collection
J198
46,873.00
B3.15/2
Item
Description
Qty
Unit
Rate
Amount B$

6mm thick fibre cement boards; jointing and finishing
to give a flush seamless surface ready for decoration;
all as per Architect's drawings and approval
A
74
m2
23.00
1,702.00
140
m2
23.00
3,220.00

floor
38
m2
32.00
1,216.00
39
m2
32.00
1,248.00
10
m2
32.00
320.00
33
m2
32.00
1,056.00
6mm thick MDF boards; jointing and finishing to give

C
D
6mm thick MDF boards; including aluminium support

system complete with hangers, edge trim and
necessary accessories; jointing and finishing to give
shown in Architect's Drawings No. AGA/034/09/A31/5
Steps ceiling at Info Counter
E

6mm thick MDF boards; including aluminium support
system complete with hangers, edge trim and
necessary accessories; including 6mm thick bronze
mirror glass; jointing and finishing to give a flush
seamless surface ready for decoration; all as shown
in Architect's Drawings No. AGA/034/09/A31
Steps ceiling at lecture theatre entry
To Collection
J198
8,762.00
B3.15/3
Item
Description
Qty
Unit
Rate
Amount B$

12.5mm thick 'ELEPHANT' Echo Bloc R-1 or equal and
approved acoustic ceiling with 3mm thick plywood
backings; fixing in accordance to manufacturer's
specification and Architect's approval
A
69
m2
28.00
1,932.00
Decorative plasterglass cornice to Architect approval

Cornices
B
85
4.00
340.00
496
4.00
1,984.00
156
4.00
624.00
54
4.00
216.00
27
4.00
108.00
4.00
16.00
22
4.00
88.00
17
4.00
68.00
7.00
28.00
INTERNAL SUSPENDED CEILINGS AND SUPPORT

WORK
Notes
K

any one of the brand of materials for suspended ceilings
recommendation.
To Collection
J198
5,404.00
B3.15/4
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL SUSPENDED CEILINGS AND SUPPORT

WORK
"OWA" 'Finetta' Exposed Square Edge / USG RADAR
Clima Plus / OWACOUSTIC constellation S3 square
edge or equal and approved (Contractor to fill in the
______________________________________________
____mineral fibre board suspended ceiling system
complete with hangers and necessary accessories in
accordance with manufacturer's instruction and
15mm Thick linings; 600 x 600mm; including exposed
metal support system
A
257
m2
25.00
6,425.00
m2
210.00
1,050.00
m2
585.00
2,925.00
m2
585.00
2,925.00
10
m2
623.00
6,230.00
"OWA" 'Spectra-Satino' or other equal and approved

acrylic glass tiles suspended ceiling system complete
with hangers and necessary accessories in
accordance with manufacturer's instruction and
3mm Thick linings; 600 x 600mm; including beveled edge
support system
B

floor
4mm thick approved acrylic sheet suspended ceiling
system complete with hangers and necessary
accessories in accordance with manufacturer's
instruction and Architect's approval

sloping ceilings; to finish 3.50m - 5.00m above floor

6mm thick approved acrylic sheet suspended ceiling
system complete with hangers and necessary
accessories in accordance with manufacturer's
instruction and Architect's approval
To Collection
J198
19,555.00
B3.15/5
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL PAINTING
Notes
A

SKK Biofine Intermatt / ICI DULUX / JOTUN or other
applying one coat_______________________sealer;
two coats ______________________ emulsion paint
in accordance to manufacturer's printed instructions;
ceilings and beams; 5m - 6.5m high
1,736
m2
4.00
6,944.00
29
m2
4.00
116.00
Cornices and the like

D
not exceeding 100mm girth
581
1.00
581.00
100mm - 200mm girth
284
2.00
568.00
120
m2
19.00
2,280.00

the following space provided) Preparing; applying one
______________________ glossy spray paint in
F
To Collection
J198
10,489.00
B3.15/6
Item
Description
Qty
Unit
Rate
Amount B$
INTERNAL CEILING FINISHES Collection

From Page B3.15/1
46,873.00
From Page B3.15/2
8,762.00
From Page B3.15/3
5,404.00
From Page B3.15/4
19,555.00
From Page B3.15/5
10,489.00

J198
91,083.00
B3.16/1
Item
Description
Qty
Unit
Rate
Amount B$
EXTERNAL WALL FINISHES

EXTERNAL INSITU FINISHINGS
plasticiser
20mm To walls
A
generally
1,841
m2
8.00
14,728.00
3.00
18.00
401
6.00
2,406.00
1,858
m2
4.00
7,432.00
Forming groove lines in plastered wall

B
20mm wide x 6mm deep
20mm wide x 12mm deep

EXTERNAL PAINTING
Notes

and stamp chop the brand of material (upon which his
applying one
coat_____________________________sealer; two
coats ________________________________emulsion
paint in accordance to manufacturer's printed
instructions;
Plastered surfaces
walls and columns
To Collection
J198
24,584.00
B3.16/2
EXTERNAL WALL FINISHES
Item
Description
Qty
Unit
Rate
Amount B$
EXTERNAL WALL FINISHES Collection

From Page B3.16/1
24,584.00

J198
24,584.00
B3.17/1
Item
Description
Qty
Unit
Rate
Amount B$
EXTERNAL FLOOR & CEILING FINISHES

EXTERNAL BEDS AND BACKINGS
Screeded beds to floors
A
20mm thick
314
m2
9.00
2,826.00
77
m2
44.00
3,388.00
116
m2
44.00
5,104.00

Notes
B


recommendation.
MML Starcrest / SEACERA / KIMGRES or other equal
porcelain
Flooring
generally
MML Posh'e / SEACERA / KIMGRES or other equal
porcelain
homogeneous tiles in rough finish; 600 x 600mm x
8.5mm thick; colour and pattern to Superintending
Officer's approval; laying with joints 3mm wide; fixing
with Dribond (Kemgrip) or other equal and approved
Flooring
generally
To Collection
J198
11,318.00
B3.17/2
Item
Description
Qty
Unit
Rate
Amount B$

MML Posh'e (SP04 White) / SEACERA / KIMGRES or
porcelain
Flooring
A
generally
33
m2
44.00
1,452.00
89
m2
39.00
3,471.00
MML Starcrest / SEACERA / KIMGRES or other equal

porcelain
Flooring
B
generally
EXTERNAL SHEET FINISHINGS AND DRY LININGS
Notes
Rates for suspended ceiling systems are deemed to be

include raking and circular cutting, forming openings for
fittings, diffusers, light fittings, speakers and the like,
small areas, narrow widths and any purpose made trim
at ceiling edges
Rates for ceiling are deemed to include for hangers of

any length and fixing hangers to concrete, brickwork,
timber or structural steelwork
To Collection
J198
4,923.00
B3.17/3
Item
Description
Qty
Unit
Rate
Amount B$
EXTERNAL SHEET FINISHINGS AND DRY LININGS

9mm thick gypsum boards; jointing and finishing to
give a flush seamless surface ready for decoration; all
as per Architect's drawings and approval
A

floor
22
m2
18.00
396.00
9mm thick plaster glass; jointing and finishing to give

B
106
m2
30.00
3,180.00
94
m2
30.00
2,820.00
206
m2
30.00
6,180.00
120
m2
38.00
4,560.00
6mm thick fibre cement boards; jointing and finishing

to give a flush seamless surface ready for decoration;
all as per Architect's drawings and approval
D

8mm thick duravent ceiling boards; jointing and
finishing to give a flush seamless surface ready for
decoration; all as per Architect's drawings and
approval
To Collection
J198
17,136.00
B3.17/4
Item
Description
Qty
Unit
Rate
Amount B$
EXTERNAL PAINTING
Notes
A

applying one
coat_____________________________sealer; two
coats ________________________________emulsion
paint in accordance to manufacturer's printed
instructions;
ceilings; not exceeding 3.50m high
22
m2
4.00
88.00
ceilings; 3.50m - 5.00m high
106
m2
4.00
424.00
94
m2
4.00
376.00
326
m2
4.00
1,304.00
To Collection
J198
2,192.00
B3.17/5
Item
Description
Qty
Unit
Rate
Amount B$
EXTERNAL FLOOR & CEILING FINISHES Collection

From Page B3.17/1
11,318.00
From Page B3.17/2
4,923.00
From Page B3.17/3
17,136.00
From Page B3.17/4
2,192.00

J198
35,569.00
B3.18/1
Item
Description
Qty
Unit
Rate
Amount B$
FITTINGS & FURNISHINGS

PLAIN INSITU CONCRETE WORK
Concrete Grade 30
Plinths and machine bases
A
not more than 0.50m3 each; including all necessary

formwork
12
No
150.00
1,800.00
49
85.00
4,165.00
24
m2
9.00
216.00
16
m2
9.00
144.00
100mm thick reinforced concrete worktops and the like;

with opening for basin etc; including reinforcement,
formwork, stooling, miters, return ends, nibs and
downstand
B
600mm wide
Screeded beds to tops and edges of worktops, shelves,
seats and the like
12mm thick
Screeded beds to tops of plinths and machine bases
12mm thick
19
3.50
66.50
3.50
31.50

Notes
G

any one of the brand of materials for China granite finish
recommendation.
To Collection
J198
6,423.00
B3.18/2
Item
Description
Qty
Unit
Rate
Amount B$

ORIENTE GRIGIO / ALITAN WHITE / TIGER SKIN or
______________________ 20mm thick China granite
finish; including cutting and preparing for installation
as required; laying with joints 3mm wide; bedding
13mm thick in cement and sand (1:6) on screeded
beds or backings (measured separately); pointing
with white or coloured waterproof cement; colour and
pattern to Architect's approval
Tops and edges of worktops, shelves, seats and the like;
laying to pattern
A
generally
13
m2
320.00
4,160.00
10
m2
29.00
290.00
Notes
B

recommendation.
__________________________ homogeneous glazed
tiles; 300 x 300mm x 8.5mm thick; colour and pattern
to Superintending Officer's approval; laying with
joints 3mm wide; fixing with Dribond (Kemgrip) or
other equal and approved adhesive; on screeded beds
or backings (measured separately); pointing using
Tops and edges of worktops, shelves, seats and the like;
laying to pattern
generally
To Collection
J198
4,450.00
B3.18/3
Item
Description
Qty
Unit
Rate
Amount B$

matt surface finish; 300 x 300mm x 8.5mm thick;
Tops of plinths and machine bases
A
generally
16
m2
29.00
464.00
Risers
B
100mm high
19
7.00
133.00
250mm high
17.00
153.00
FURNITURE AND FITTINGS

Notes
D
Refer to the drawings, specification and manufacturer's

catalogues for full details and furnishings of the furniture
and fittings required
Brickwalls, concrete plinths, concrete worktops, tiling and

timber skirting where applicable are measured
separately
Unless otherwise stated, all metal surface shall be

treated against rust and corrosion and have epoxy
powder coated finish or other comparable finish as
approved by Architect and shall be scratch resistant
Rates for furniture and fittings shall include for all

necessary ironmongery, epoxy powder coating, spray
painting, clear lacquer or varnish as agreed and
approved by the Architect
To Collection
J198
750.00
B3.18/4
Item
Description
Qty
Unit
Rate
Amount B$

Loose furniture; all to manufacturer's details and
specification and Superintending Officer's approval
Artak or other equal and approved high back arm chair
A
Space CL8001 high back arm chair; comprising high

density moulded injected foam; fashionable moulded
polypropylene combination chrome armrest with
upholstered arm pad; imported gas lift and fully
adjustable head rest; rocket shape nylon base with
heavy duty twin wheel castor; upholstered with imported
mesh backrest and polyurethane for seat; as shown in
Architectural Drawing No. A-70
No
400.00
1,600.00
Space CL9002 low back arm chair; comprising high

density moulded injected foam; adjustable armrest with
combination chrome and polypropylene armrest with
upholstered arm pad; synchronized mechanism locking
system; imported gas lift; rocket shape nylon base with
22
No
435.00
9,570.00
Space CL8002 low back arm chair; comprising high

density moulded injected foam; fashionable moulded
upholstered arm pad; synchronized mechanism locking
system; imported gas lift; rocket shape nylon base with
69
No
381.00
26,289.00
15
No
333.00
4,995.00
Artak or other equal and approved low back arm chair

B
Hawkin or other equal and approved visitor arm chair

D
Space CL8003 visitor arm chair; comprising high density

moulded injected foam; fashionable moulded
upholstered arm pad; epoxy black cantilever base;
upholstered with imported mesh backrest and
polyurethane for seat; as shown in Architectural Drawing
No. A-70
To Collection
J198
42,454.00
B3.18/5
Item
Description
Qty
Unit
Rate
Amount B$

Artak or other equal and approved low back arm chair
A
Elixir CL663 low back arm chair; comprising high density

moulded injected foam; fashionable polypropylene
armrest; imported synchronized adjustment mechanism
for maximum lumbar support with 1 locking system;
curved design chrome trimming line; chrome metal base
and heavy duty twin wheel castor; upholstered with
PVC/fabric; as shown in Architectural Drawing No. A-70
54
No
275.00
14,850.00
No
430.00
860.00
No
115.00
230.00
No
345.00
345.00
No
555.00
3,330.00
Artak or other equal and approved four seater link

B
AR03-4 four seater link chair; comprising powder coated

steel framing; sponged foam fabric upholstered seat;
high impact moulded perforated polypropylene backrest;
upholstered with fabric; as shown in Architectural
Drawing No. A-70
Artak or other equal and approved one seater
CH-AS41-1 one seater; comprising high density

polyurethane fire-retardant foam wrapped in polyester
fiber for fantastic comfort; full dried selected solid
hardwood framing; as shown in Architectural Drawing
No. A-70
Artak or other equal and approved three seater
CH-AS41-3 three seater; comprising high density

fiber for fantastic comfort; full dried selected solid
hardwood framing; as shown in Architectural Drawing
No. A-70
Artak or other equal and approved one seater sofa
COM-Set CL9900-1 one seater sofa; comprising hard

wearing easy care, heavy quality vinyl leather; high
density polyurethane fire-retardant foam wrapped in
polyester fiber; full dried selected solid hardwood framing
chrome steel metal base; upholstered with polyurethane;
as shown in Architectural Drawing No. A-70
To Collection
J198
19,615.00
B3.18/6
Item
Description
Qty
Unit
Rate
Amount B$

Artak or other equal and approved three seater sofa
A
COM-Set CL9900-3 three seater sofa; comprising hard

wearing easy care, heavy quality vinyl leather; high
density polyurethane fire-retardant foam wrapped in
polyester fiber; full dried selected solid hardwood framing
chrome steel metal base; upholstered with polyurethane;
11
No
824.00
9,064.00
No
269.00
1,345.00
No
452.00
452.00
No
880.00
880.00
No
380.00
380.00
No
900.00
2,700.00
Artak or other equal and approved center table

B
COM-Set CL9900-5T center table; comprising glass top

with chrome steel metal base; as shown in Architectural
Drawing No. A-70
Artak or other equal and approved one seater sofa
S820-1 one seater sofa; comprising hard wearing easy

care, heavy quality vinyl leather; high density
fiber; chrome framing and legs; upholstered with
polyurethane; as shown in Architectural Drawing No.
A-70
S820-3 three seater sofa; comprising hard wearing easy

care, heavy quality vinyl leather; high density
fiber; chrome framing and legs; upholstered with
polyurethane; as shown in Architectural Drawing No.
A-70
Artak or other equal and approved center table
Center table; comprising black glass top with stainless

steel base; as shown in Architectural Drawing No. A-70
NXT George S-810-3 three seater sofa comprising hard

wearing easy care, heavy quality vinyl leather with button
design for backrest and seat; high density polyurethane
fire-retardant foam wrapped in polyester fiber; full dried
selected solid hardwood framing and stainless steel legs;
upholstered with polyurethane; as shown in Architectural
Drawing No. A-71
To Collection
J198
14,821.00
B3.18/7
Item
Description
Qty
Unit
Rate
Amount B$

Schaefer or other equal and approved mechanical mobile
storage system
A
High density heavy duty mechanical mobile storage

system with pull out lateral frame; as shown in
36
No
475.00
17,100.00
Workstation A; cubicle comprising partition system with

combination of half glass and full board partition with
centre trunking with width not bigger than 900mm and
height 1200mm; L-shape table in 25mm thick damage
resistant wood grain laminated finish with 3mm thick
PVC edging, 2 drawer and 1 file high mobile pedestal
with central lockset complete with matte finish handles;
CPU trolley and keyboard; comes with a low cabinet with
swing doors; complete with central lockset and matte
finish handles; including all necessary fixing accessories;
No
1,795.00
7,180.00
Workstation B; cubicle comprising partition system with

full board partition with centre trunking 1200mm high;
free standing rectangular table in 25mm thick wood grain
laminated surface with matching ABS edging, 2 drawer
and 1 file high mobile pedestal with central lockset
complete with matte finish handles; CPU trolley and
keyboard; including all necessary fixing accessories; as
shown in Architectural Drawing No. A-71
No
721.00
2,884.00
Workstation C; cubicle comprising partition system with

combination of half glass and full board partition with
centre trunking with width not bigger than 600mm and
height 1200mm; L-shape table in 25mm thick damage
resistant wood grain laminated finish with 3mm thick
PVC edging, 2 drawer and 1 file high mobile pedestal
with central lockset complete with matte finish handles;
CPU trolley and keyboard; comes with a low cabinet with
swing doors; complete with central lockset and matte
finish handles; including all necessary fixing accessories;
43
No
1,175.00
50,525.00
Artak or other equal and approved cubicle workstation

B
To Collection
J198
77,689.00
B3.18/8
Item
Description
Qty
Unit
Rate
Amount B$

Artak or other equal and approved cubicle workstation
A
Workstation D; cubicle partition comprising combination

of half glass and full board partition with combination of
centre and bottom trunking with width not bigger than
1050mm and height 1200mm; complete with all
necessary fixing accessories; as shown in Architectural
Drawing No. A-71
No
1,702.00
10,212.00
No
850.00
5,100.00
2/128 rectangular desk; comprising 25mm thick high

pressure wood grain finish table top surface with 3mm
thick PVC edging in all sides; laminated finish modesty
panel and metal base leg support with green carter
cover; overall size W1400 x D600; as shown in
No
337.00
674.00

No
375.00
750.00

No
393.00
1,572.00
Artak or other equal and approved L-shape table

B
INU L-shape table; comprising 25mm thick melamine

laminated board with matching ABS edging in
white/wood grain laminate colour finish; perforated metal
modesty panel; epoxy coated base support comes with
rubber cap; 2 drawer and 1 file fixed pedestal with
nickel-plated chrome handles and central lock system;
complete with CPU trolley and keyboard; as shown in
Artak or other equal and approved rectangular table
To Collection
J198
18,308.00
B3.18/9
Item
Description
Qty
Unit
Rate
Amount B$

Artak or other equal and approved rectangular table
A

No
289.00
578.00
224 Table connector; comprising 25mm thick wood grain

finished surface protected with PVC edging in all sides
and corner rounded; complete with all necessary fixing
accessories; overall size W800 x D800; as shown in
No
58.00
232.00
3/144 L-shape desk; comprising 25mm thick high

pressure wood grain finished table top surface with 3mm
thick PVC edging in all sides, laminated finish modesty
panel and metal base leg support with wire management
system and green carter cover; comes with 3 drawer
mobile pedestal; complete with nickel plated matt finish
handles and central lockset; overall size W1800 x
D1600; as shown in Architectural Drawing No. A-71
No
580.00
1,740.00
No
280.00
1,680.00
16
No
210.00
3,360.00
Artak or other equal and approved L shape table

B
Artak or other equal and approved sliding door low cabinet

D
INU sliding door low cabinet; comprising 25mm thick

wood grain melamine laminated surface cabinet
protected with PVC edging with all edges and corner
rounded; with sliding doors in maple colour finish for
doors, front panels, side panels and shelf and 1
adjustable inner shelf; complete with nickel-plated matt
finish handles and lock; overall size W750 x D450 x
H1200; as shown in Architectural Drawing No. A-72
Artak or other equal and approved sliding door cabinet
640 Cherry sliding door cabinet; comprising 25mm thick

wood grain melamine laminated surface cabinet
protected with PVC edging with all edges and corner
rounded; with sliding doors and 1 adjustable inner shelf;
complete with nickel-plated matt finish handles and lock;
overall size W804 x D456 x H873; as shown in
To Collection
J198
7,590.00
B3.18/10
Item
Description
Qty
Unit
Rate
Amount B$

Artak or other equal and approved mobile pedestal
A
141 3D Mobile pedestal; comprising 25mm thick wood

grain melamine laminated surface cabinet protected with
PVC edging with all edges and corner rounded; drawers
fixed with self-closing metal runner; handles with
nickel-plated matt finish with central lock system and
pencil tray; with heavy duty castors; overall size W410 x
D478 x H556mm; as shown in Architectural Drawing No.
A-72
No
132.00
1,188.00
No
30.00
270.00
No
30.00
270.00
No
363.00
726.00
No
225.00
225.00
No
765.00
765.00
Artak or other equal and approved keyboard tray

B
164 Keyboard tray; comprising pull out metal runner

keyboard tray with stopper; overall size W560 x 290 x
40mm; as shown in Architectural Drawing No. A-72
Artak or other equal and approved CPU trolley
168 CPU trolley; comprising wood grain finish melamine

laminated CPU holder with wheel castors; overall size
W270 x D500 x H170mm; as shown in Architectural
Drawing No. A-72
Artak or other equal and approved round table
189 S Cherry round discussion table; comprising 25mm

thick damage resistant top panel with 3mm thick PVC
edging on sides; complete with metal base pole leg on
round base plate in epoxy coated finish; as shown in
Artak or other equal and approved triangle table
289 Cherry triangle conference table; comprising 25mm

thick damage resistant top panel with 3mm thick PVC
edging with all sides and corner rounded; with easy
height adjustable epoxy finished metal leg in 75mm
diameter; overall size W1210 x D1210 x H750mm; as
shown in Architectural Drawing No. A-72
Artak or other equal and approved oval table
208 Oval shape conference table; comprising table top in

high-pressure melamine laminated surface in 25mm
thick damage resistant; top in wood grain laminate finish
and protected with PVC edging; strong die-cast base
560mm diameter; as shown in Architectural Drawing No.
A-72
To Collection
J198
3,444.00
B3.18/11
Item
Description
Qty
Unit
Rate
Amount B$

Artak or other equal and approved modular table
A
167 Modular meeting table; comprising top with high

pressure wood grain beech laminated surface in 25mm
thick damage resistant protected with PVC edging on all
edges and corner rounded with metal base leg support;
metal green leg with wire management trunking;
complete with all necessary accessories; as shown in
No
890.00
1,780.00
No
480.00
2,880.00
38
No
240.00
9,120.00
No
1,080.00
1,080.00
No
2,750.00
2,750.00
No
375.00
375.00
Modulab or other equal and approved glass sliding door

cabinet
B
MDL 27aFH cabinet with glass sliding door; overall size

1000 x 450 x 1750mm high; as shown in Architectural
Drawing No. A-72
Eonmetal or other equal and approved boltless shelving
5 Level boltless shelving; comprising central support and

9mm thick MDF board shelving; overall size 1000 x 450
x 2100mm high; as shown in Architectural Drawing No.
A-72
Fittings; in Nyatoh generally; complete with all
necessary ironmongery, laminate, granite, all other
finishings and spray painting, as shown upon the
Architectural detail drawings
Low level cabinet in Conference Room; comprising 3 nos.
20mm thick Nyatoh double leaf doors; all as shown and
described in Architectural Drawing No. 50; all to Architect's
approval
overall size 3600mm long x 500mm wide x 850mm high

Low level cabinet with display in Conference Room; all as
shown and described in Architectural Drawing No. 50; all
to Architect's approval

Overhead cabinet in Pantry; comprising 2 nos. 20mm thick
Nyatoh double leaf doors and 1 no. single leaf door; all as
shown and described in Architectural Drawing No. A-68;
all to Architect's approval
To Collection
J198
17,985.00
B3.18/12
Item
Description
Qty
Unit
Rate
Amount B$

Overhead cabinet in Pantry; comprising 2 nos. 20mm thick
Nyatoh double leaf doors and 1 no. single leaf door; all as
A
No
375.00
1,125.00
No
720.00
1,440.00
No
840.00
1,680.00
No
3,200.00
6,400.00
No
720.00
720.00
No
1,050.00
1,050.00
No
600.00
2,400.00
Low level cabinet in Head of Section and Interview Room

at Pharmacy Enforcement Section; comprising 2 nos.
described in Architectural Drawing No. A-54; all to
B

Low level cabinet in Head of Section and Clerical Area at
Drug and Poison Information Section; comprising 2 nos.

Receiving counter in Receiving Area; all as shown and

Drawer-cabinet in Document Storage at Drug Information
Section; all as shown and described in Architectural
Drawing No. A-54; all to Architect's approval

Computer Desk and Filing Cabinet in Exhibition and
Material Library; all as shown and described in
Architectural Drawing No. A-55; all to Architect's approval

Bookshelve in Exhibition and Material Library; all as
To Collection
J198
14,815.00
B3.18/13
Item
Description
Qty
Unit
Rate
Amount B$

Information Counter with Drawer in Ground Floor Lobby;
all as shown and described in Architectural Drawing No.
A-56; all to Architect's approval
A
No
1,600.00
1,600.00
No
480.00
480.00
No
2,600.00
2,600.00
No
840.00
840.00
No
1,000.00
1,000.00
No
1,950.00
1,950.00
No
1,700.00
1,700.00
Whiteboard in Meeting Room at First Floor; comprising

1800 x 900 x 8mm thick laminated glass with reverse
sticker on 16mm thick plywood backing glassboard;
complete with Nyatoh ply marker holder; all as shown and
B
overall size 1800mm long x 900mm high

Whiteboard panel in Meeting Room at Second Floor; all as
overall size 3800mm long x 2800mm high

Desk with drawer in Third Floor Interview Room; all as

Display cabinet in Receiving Area; all as shown and
overall size 2000mm long x 4750mm wide x 2800mm

high
Information counter in Second Floor Receiving Area; all as

Information counter in Third Floor Receiving Area; all as
To Collection
J198
10,170.00
B3.18/14
Item
Description
Qty
Unit
Rate
Amount B$

Desk with drawer in Third Floor Interview Room; all as
A
No
1,600.00
1,600.00
No
2,100.00
2,100.00
No
2,100.00
2,100.00
Cabinet in Deputy Director's Office; all as shown and

B

Cabinet in Director's Office; all as shown and described in
Architectural Drawing No. A-62; all to Architect's approval

Fittings; in Plyboard generally; complete with all
necessary ironmongery, laminate, all other finishings
and spray painting, as shown upon the Architectural
detail drawings
Low Cabinet Partition in Drug Administration Section (Left
Side); all as shown and described in Architectural Drawing
No. A-64a; all to Architect's approval
No
1,250.00
1,250.00
No
1,860.00
1,860.00
No
2,460.00
4,920.00
No
3,080.00
3,080.00
Low Cabinet Partition in Pharmacy Enforcement and Drug

& Poison Information Section; all as shown and described
in Architectural Drawing No. A-64a; all to Architect's
approval
F

Low Cabinet Partition in Administration Research and
Development Section; all as shown and described in
Architectural Drawing No. A-64a; all to Architect's approval
To Collection
J198
16,910.00
B3.18/15
Item
Description
Qty
Unit
Rate
Amount B$

Fittings; in Plyboard generally; complete with all
necessary ironmongery, laminate, all other finishings
and spray painting, as shown upon the Architectural
detail drawings
Low Cabinet Partition in Drug Administration Section
(Right Side); all as shown and described in Architectural
Drawing No. A-64a; all to Architect's approval
A
No
3,696.00
3,696.00
100
No
240.00
24,000.00
Notes
B

any one of the brand of materials for lecture theater
seats and vertical blinds stated in the item description.
chop the brand of material (upon which his rates and
prices are based on) for the particular item of works in
the space provided. Fixing of the materials shall be in
Lecture theater seat
ARTAK TS-808-W / CLASSIC 2001 AC or other equal

and approved (Contractor to fill in the brand of seat in
_______________________lecture theater seat;
comprising high density soft polyurethane fire-retardant
and moulded by cold foaming back and seat; shell in
injection moulded with multiple composite materials
aging and discoloration resistant; cold-rolled high carbon
steel in 3mm thickness with anti-rust treatment and static
powder coated finish; armrest in American rosewood
beech timber; pressure reversion seat, seat base with
muffling hole and sound effect wave board; complete
with necessary accessories such as foldable
polypropylene writing tablet, book net, cup holder, row
indicator and seat indicator; all as shown and described
in Architectural Drawing No. A-70
To Collection
J198
27,696.00
B3.18/16
Item
Description
Qty
Unit
Rate
Amount B$
Vertical blinds
WINDSOR BLUE APPLE / MOONLIGHT / TROPICANA or
other equal and approved (Contractor to fill in the brand of
vertical blinds in the following space provided)
____________________________ vertical blinds;
including powder coated aluminium rail, headbox, cord
control, louvres and accessories; fixing in accordance to
manufacturer's instruction and Architect's approval
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
set of blind 2100 x 2500mm drop to window opening

1800mm wide x 2200mm high (W1)
No
147.00
588.00

12
No
126.00
1,512.00

No
256.00
512.00

19
No
182.00
3,458.00

1200mm wide x 2100mm high (W7a)
No
101.00
202.00

61
No
180.00
10,980.00

No
169.00
507.00

No
1,244.00
1,244.00

No
446.00
446.00

No
397.00
397.00

No
232.00
232.00

No
157.00
314.00

No
1,908.00
3,816.00

No
1,649.00
3,298.00

No
1,620.00
1,620.00
set of blind 5900 x 3550 mm drop to window opening

No
587.00
587.00
set of blind 4300 x 2300 mm drop to window opening

No
277.00
277.00
To Collection
J198
29,990.00
B3.18/17
Item
Description
Qty
Unit
Rate
Amount B$
FITTINGS & FURNISHINGS Collection

From Page B3.18/1
6,423.00
From Page B3.18/2
4,450.00
From Page B3.18/3
750.00
From Page B3.18/4
42,454.00
From Page B3.18/5
19,615.00
From Page B3.18/6
14,821.00
From Page B3.18/7
77,689.00
From Page B3.18/8
18,308.00
From Page B3.18/9
7,590.00
From Page B3.18/10
3,444.00
From Page B3.18/11
17,985.00
From Page B3.18/12
14,815.00
From Page B3.18/13
10,170.00
From Page B3.18/14
16,910.00
From Page B3.18/15
27,696.00
From Page B3.18/16
29,990.00

J198
313,110.00
B3.19/1
Item
Description
Qty
Unit
Rate
Amount B$
SANITARY APPLIANCES
SANITARY INSTALLATION
Notes
A

any one of the brand of materials for sanitary fittings
(upon which his rates and prices are based on) for that
recomemdation .
Rates shall include for silicone sealant pointing to

sanitary appliances at joints with tiled surfaces
White sanitary fittings and accessories; bedding
wastes and taps in jointing compound
Water Closet
TOTO CW702 J toilet bowl (S-trap) (rough-in 305mm);

complete with SW784JP low tank with cover; TX
212CWS dual flush tank trim (6/3 liters); TC 262 N
plastic seat & cover / HCG CS130E close-coupled
siphonic water closet / NAHM Tian NM-2007 slim S-trap
water closet complete with WT-696 fittings or other equal
and approved and necessary accessories (Contractor to
provided)
_____________________________________________
_____________________________________________
______
29
No
347.00
10,063.00
TOTO C 704 L close-coupled siphonic water closet;

complete with SW 784 JP low tank with cover; TX 248
CWS tank trim w/o stop valve (6 liters); TC 272 N plastic
seat and cover with plastic hinges (Elongated) / HCG
CS130E close-coupled siphonic water closet / NAHM
Tian NM-2007 slim S-trap water closet complete with
WT-696 fittings and necessary accessories or other
_____________________________________________
_____________________________________________
______
No
378.00
3,024.00
To Collection
J198
13,087.00
B3.19/2
SANITARY APPLIANCES
Item
Description
Qty
Unit
Rate
Amount B$
Squatting Water Closet
A
TOTO CE 9; single flush squatting toilet with high level

cistern with handle and cord; brackets; flush pipe
including fixing walls and connection to cistern and pan /
HCG C107C squatting pan complete with CF636 flush
valve or other equal and approved; setting closet in
concrete (Contractor to fill in the brand of material in the
following space provided)
_____________________________________________
_____________________________________________
______
No
407.00
3,256.00
No
385.00
1,540.00
TOTO LW 523 J console counter lavatory basin;

complete with brackets; traps; one hole tap; pop-up
waste / HCG L4006 console counter basin size 505 x
505 x 190mm complete with pop-up waste P-trap /
NAHM Tian nur NM-5701/WT drop in wash basin or
other equal and approved; (Contractor to fill in the brand
_____________________________________________
_____________________________________________
______
40
No
201.00
8,040.00
TOTO LW 103 JT1 console counter lavatory basin;

complete with brackets; traps; one hole tap; pop-up
waste / HCG L201S wall hung basin size 560 x 550 x
210mm complete with hangers & screws, pop-up waste;
P-trap / NAHM N-5810-SC/WT nice wall hung size 500 x
535mm or other equal and approved; (Contractor to fill in
the brand of material in the following space provided)
_____________________________________________
_____________________________________________
______
No
355.00
2,840.00
Double bowl sink

B
EBANEZ OKP 1036/BC stainless steel kitchen sink /

RHINE RH2452; double bowl and double drainer sink;
traps; plugs, chains and stays / Rev stainless steel sink
double bowl single drainer or other equal and approved;
fixing in joinery fittings in concrete worktop; (Contractor
provided)
_____________________________________________
_____________________________________________
______
Wash basin
To Collection
J198
15,676.00
B3.19/3
SANITARY APPLIANCES
Item
Description
Qty
Unit
Rate
Amount B$
Sink
A
TOTO SKW 322 B service sink; complete with TKP 01

SR waste fittings - trap; brackets; plugs, chains and
stays / HCG S324N service sink with BF672AS S-trap,
waste fittings; plugs, chains and stays or other equal and
approved; one tap holes; plugging and screwing to walls;
space provided)
_____________________________________________
_____________________________________________
______
No
930.00
7,440.00
TOTO 'EGO ll' TX 123 LES; extended single lever

lavatory faucet / HCG LF567B extended basin mixer /
ABM 4014 single handle tall basin mixer or other equal
and approved; union connections to Kelen pipes or
stainless steel pipes including connectors; (Contractor to
provided)
_____________________________________________
_____________________________________________
______
40
No
171.00
6,840.00
TOTO T 205 QN; lever handle lavatory single faucet /

HCG LF3311 self closing bib tap complete with push up
waste and P trap / ZUCCHETTI Z00901.9500H single
handle lavatory single faucet or other equal and
approved; union connections to Kelen or stainless steel
pipes including connectors (Contractor to fill in the brand
_____________________________________________
_____________________________________________
______
No
73.00
584.00
TOTO TX 605 KES single lever kitchen faucet / HCG

KF580 lever handle sink mixer with swivel spout /
ZUCHETTI Z3326P single handle kitchen mixer with
swivel spout or other equal and approved; union
connections to Kelen pipes or stainless steel pipes
including connectors; (Contractor to fill in the brand of
_____________________________________________
_____________________________________________
______
No
185.00
740.00
Tap
B
To Collection
J198
15,604.00
B3.19/4
SANITARY APPLIANCES
Item
Description
Qty
Unit
Rate
Amount B$
Tap
A
TOTO T 30 ARQ 13 N sink tap with swivel spout / HCG

LF614E wall mounted faucet with shwivel spout /
ZUCCHETTI Z41073 bib tap with swivel spout or other
equal and approved; union connections to Kelen pipes or
stainless steel pipes including connectors; (Contractor to
provided)
_____________________________________________
_____________________________________________
______
No
77.00
616.00
45
No
66.00
2,970.00
45
No
74.00
3,330.00
45
No
33.00
1,485.00
Anal Spray
B
TOTO TX 403 SBPIV (Pastel Ivory); shower spray with

stop valve / ABM 1183 angle valve with 5208 spray
shower or other equal and approved; union connections
to Kelen pipes or stainless steel pipes including
connectors; plugging and screwing to walls (Contractor
provided)
_____________________________________________
_____________________________________________
______
Toilet paper holder
TOTO TX 722 AE; 'EGO' spare paper holder / HCG

BA8275 / NAHM NM-9441 universal paper holder or
other equal and approved; pluging and screwing to walls;
space provided)
_____________________________________________
_____________________________________________
______
Robe hook
TOTO "EGO ll" TX 704 AES / HCG BA8282; double robe

hook / NAHM-9443/WT universal towel hook or other
equal and approved; plugging and screwing to walls;
space provided)
_____________________________________________
_____________________________________________
______
To Collection
J198
8,401.00
B3.19/5
SANITARY APPLIANCES
Item
Description
Qty
Unit
Rate
Amount B$
Soap dispenser
A
'AUSTRALIAN DISPENSER 6542' / HCG SD-101

vertical stainless steel satin (304) liquid soap dispenser
or other equal and approved; walls hung; plugging and
screwing to walls; (Contractor to fill in the brand of
_____________________________________________
_____________________________________________
______
24
No
225.00
5,400.00
TOTO TS 125 R / HCG SD823 liquid soap dispenser or

other equal and approved; walls hung; plugging and
_____________________________________________
_____________________________________________
______
No
61.00
488.00
17
No
775.00
13,175.00
ARMITAGE SHANKS UK S 6912 AC Sup arm 805 white

hinged bar / HCG HF 8599 hinged bar chrome or other
equal and approved; plugging and screwing to wall;
complete with all accessories and fittings; (Contractor to
provided)
_____________________________________________
_____________________________________________
______
No
665.00
5,320.00
ARMITAGE SHANKS UK S 6730 AC gen 2 grab rail

600mm white straight / HCG HF8602 grab rail 700mm
long chrome straight or other equal and approved;
plugging and screwing to wall; complete with all
accessories and fittings; (Contractor to fill in the brand of
_____________________________________________
_____________________________________________
______
24
No
365.00
8,760.00
Hand dryer
C
TOTO RA 230 A / HCG HD909 automatic hand dryer

220V or other equal and approved; plugging and
_____________________________________________
_____________________________________________
______
Disabled bar
To Collection
J198
33,143.00
B3.19/6
SANITARY APPLIANCES
Item
Description
Qty
Unit
Rate
Amount B$
Disabled bar
A
ARMITAGE SHANKS UK S 6765 AC gen 2 pull rail

450mm white straight / HCG HF8601 pull rail 400mm
long chrome straight or other equal and approved;
plugging and screwing to wall; complete with all
accessories and fittings (Contractor to fill in the brand of
_____________________________________________
_____________________________________________
______
No
265.00
2,120.00
63
No
39.00
2,457.00
6mm thick glass mirror (beveled edge) on 12mm thick

ply backing; aluminium channel surrounds; concealed
fixing; plugging and screwing to walls; 600 x 900 mm
high.
No
98.00
882.00

high overall; comprising 4 no. fixed glass panels each
size 700 x 1200mm
No
610.00
610.00

high overall; comprising 5 no. fixed glass panels each
size 700 x 1200mm
No
763.00
5,341.00
Floor drains
B
TOTO TX 1 C; stainless steel floor drains; 130.5 x

130.5mm / ABM 3043; 100 x 100mm floor trap / ABM
3027 stainless steel floor drain or other equal and
approved; (Contractor to fill in the brand of material in
_____________________________________________
_____________________________________________
______
Mirror glass
To Collection
J198
11,410.00
B3.19/7
SANITARY APPLIANCES
Item
Description
Qty
Unit
Rate
Amount B$
SANITARY APPLIANCES Collection

From Page B3.19/1
13,087.00
From Page B3.19/2
15,676.00
From Page B3.19/3
15,604.00
From Page B3.19/4
8,401.00
From Page B3.19/5
33,143.00
From Page B3.19/6
11,410.00

J198
97,321.00
B3.20/1
Item
Description
Qty
Unit
Rate
Amount B$
PLUMBING INSTALLATIONS
Notes
A
Plumbing Installation works shall be done by Plumber(s)

who have either one of the following qualifications :-
a) City & Guilds, 832 (Craft Certificates in Plumbing)
b) 569 (Advanced Certificate in Pumbing)
c) National Trade Certification 2 in Plumbing
d) National Trade Certification 3 in Plumbing
e) Certificate of Competency in Plumbing Works by

Director of Technical Education, Ministry of Education,
Negara Brunei Darussalam
The original or a true copy of certificate as certified by

the Brunei Courts are to be submitted for verification
prior to any commencement of plumbing works on the
site
Notes
Pipes 50mm diameter and below are deemed to

included all sockets, connectors, unions, elbows, bends,
made bends, tees, welded junctions, diminishing
sockets, plugs, accessories and the like
Contrary to SMM, the description of each item of

pipework shall be deemed to included all pipe sleeves
passing through walls or floors. Sealing up openings
using approved fire rated materials and water proofed
sealants in wet areas. The Contractor shall included for
all costs in connections with the provision of such pipe
sleeves in his rates and prices
This section includes branch drains from fixtures and

gullies up to manholes
Manholes and main drains are measured in Bill No.6 Foul Drainage
Unplasticised PVC pipes and fittings; BS 4514;
solvent welded joints
32mm Diameter branch soil and waste pipe
generally; without fixings
18
8.00
144.00
chasing in walls
14
8.00
112.00

N
fixing with and including hangers
12
12.00
144.00
chasing in walls
49
12.00
588.00
To Collection
J198
988.00
B3.20/2
Item
Description
Qty
Unit
Rate
Amount B$
50mm Diameter branch vent pipe
A
94
12.00
1,128.00
41
14.00
574.00
114
14.00
1,596.00
75mm Diameter main soil and waste pipe

B
fixing with and including holderbats


Extra over 75mm diameter pipes for
bends
13
No
8.00
104.00
equal or reducing single branch junctions
40
No
8.00
320.00
equal or reducing single branch junctions; with access

door
15
No
10.00
150.00
92
16.00
1,472.00
68
16.00
1,088.00
61
16.00
976.00
No
8.00
72.00
54
No
8.00
432.00
No
10.00
90.00
35
No
20.00
700.00
No
60.00
300.00
56
No
50.00
2,800.00

G

100mm Diameter main vent pipe


bends
equal or reducing single branch junctions
equal or reducing single branch junctions; with access

door
anti-syphon connection arms between w.c. pan vent horn

and vent pipe line; including connections to pan and vent
pipe
Vent cowls; fixing in end of pipes
100mm diameter pipes

Floor traps; access door; stop-roach device; rising piece
with 131mm square top rising piece complete with snap in
cover (measured separately); including extension piece
75mm diameter outlet; jointing to U.P.V.C. pipe
To Collection
J198
11,802.00
B3.20/3
Item
Description
Qty
Unit
Rate
Amount B$
A
setting vertically in the ground; encasing with concrete
14.00
84.00
laying in the ground; including all necessary excavation,

encasing in concrete and backfilling etc.
14.00
126.00
12
14.00
168.00

C

13
16.00
208.00

42
16.00
672.00
12
No
8.00
96.00

F
bends
12
18.00
216.00

82
18.00
1,476.00
18.00
36.00
12
18.00
216.00
14
No
8.00
112.00
No
50.00
450.00
100mm Diameter main vent pipe

I


bends
Floor traps; access door; stop-roach device; rising piece
with 131mm square top rising piece complete with snap in
cover (measured separately); including extension piece
75mm diameter outlet; jointing to U.P.V.C. pipe; setting

on and surrounding with concrete
To Collection
J198
3,860.00
B3.20/4
Item
Description
Qty
Unit
Rate
Amount B$
Gully traps; comprising 300mm diameter UPVC pipe
sleeves to BS 3505; approved 304 x 304mm hinged hot
dipped galvanised external grating and frame; 150mm
diameter UPVC removable internal grating with outer
connector piece and approved 150mm diameter gully trap
to BS 4660; including forming openings for incoming
waste pipes; setting on and surrounding with Grade 20
concrete, excavation, backfilling, disposal and formwork;
all as detailed on Engineer's Dawings PPPIA-BPF-02-S06
sheet 04 of 04
A
100mm diameter outlet; jointing to U.P.V.C. pipe
No
350.00
1,750.00
Item
500.00
500.00
Testing
Testing the installation as the work proceeds and upon
completion in accordance with the Specification and to the
satisfaction of the Superintending Officer
B
sanitary installation
COLD WATER INSTALLATION
Notes
Pipes 50mm diameter and below are deemed to

included all sockets, connectors, unions, elbows, bends,
made bends, tees, welded junctions, diminishing
sockets, plugs, accessories and the like
Contrary to SMM, the description of each item of

pipework shall be deemed to included all pipe sleeves
passing through walls or floors. Sealing up openings
using approved fire rated materials and water proofed
sealants in wet areas. The Contractor shall included for
all costs in connections with the provision of such pipe
sleeves in his rates and prices
Rates and price for all stainless steel pipes in contact

with soil shall be deemed to included wrapping with
authority approval polythene sheets
No solder containing lead to be used for jointing pipes
The cold water installation has been measured up to the

water tank. Incoming water main is measured in Bill No.6
- External Water Supply
To Collection
J198
2,250.00
B3.20/5
Item
Description
Qty
Unit
Rate
Amount B$

Notes
A
All pipe shall be adequately supported by spacing clips

at maximum spacing of 1.20m and shall be so aligned to
avoid air locks for low level alighment, pipes shall be
installed approximately 0.15m above floor level
All pipes within building shall be recessed into plaster

into wall unless otherwise stated
Every water fitting within the building shall be so placed

to be readily, accessible for inspection repair or
replacement

any one of the brand of materials for cold water pipes
to specify, initiall and stamp chop the brand of material
(upon which his rates and prices are based on) for that
recomemdation
Kelen pipe to BS6920 / Stainless steel tubes to be BS
4127; Part 2; 1993 Grade 316; lancashire fittings and
joints (Contractor to fill in the brand of material in the
following space provided)
______________________________________________
______________________________________________
____
18mm Diameter pipes
generally; without fixings
chasing in walls
29
15.00
435.00
190
15.00
2,850.00
16.00
128.00
108
18.00
1,944.00
18.00
162.00
20mm Diameter pipes

G
chasing in walls
28mm Diameter pipes
chasing in walls
35mm Diameter pipes
35
22.00
770.00
12
22.00
264.00
chasing in walls
22.00
88.00
embedding in concrete, floor screeds and the like
22.00
66.00
To Collection
J198
6,707.00
B3.20/6
Item
Description
Qty
Unit
Rate
Amount B$

Valves and the like
Brass or gunmetal screwdown stopvalves to BS 1010 for
above ground installation and BS 5433 below ground
installation
A
B
C
D
18mm diameter; union connections to Kelen pipes or

stainless steel pipes; including connectors
104
No
25.00
2,600.00

No
30.00
30.00

13
No
40.00
520.00

No
50.00
400.00
Item
1,000.00
1,000.00
Item
150.00
150.00
Item
250.00
250.00
Sterilization
Sterilizing the whole of the cold water installation by an
approved Specialist firm; including mains, service pipes,
tanks and cistern, distribution pipes
E
generally
Labelling
Labelling all pipework throughout the installation in
accordance with the Specification and to the satisfaction
of the Superintending Officer
cold water installation

Testing
Testing the installation as the work proceeds and upon
completion in accordance with the Specification and to the
satisfaction of the Superintending Officer
cold water installation
To Collection
J198
4,950.00
B3.20/7
Item
Description
Qty
Unit
Rate
Amount B$
PLUMBING INSTALLATIONS Collection

From Page B3.20/1
988.00
From Page B3.20/2
11,802.00
From Page B3.20/3
3,860.00
From Page B3.20/4
2,250.00
From Page B3.20/5
6,707.00
From Page B3.20/6
4,950.00

J198
30,557.00
Addendum No.1
B3.SUM/1
Item
Description
Qty
Unit
Rate
Amount B$
Bill No. 3 Summary

From Page B3.1/3 - PILING
168,060.10
From Page B3.2/4 - LOWEST SLAB & FOUNDATIONS
122,800.80
From Page B3.3/2 - FRAME
255,455.00
From Page B3.4/2 - UPPER FLOORS
91,920.30
From Page B3.5/3 - ROOF STRUCTURE
41,784.00
From Page B3.6/4 - ROOF FINISH
59,043.00
From Page B3.7/2 - ROOF DRAINAGE

From Page B3.8/7 - STAIRCASES
39,112.35
From Page B3.9/5 - EXTERNAL WALLS & CLADDING
144,494.50
From Page B3.10/8 - WINDOWS
157,405.00
From Page B3.11/3 - INTERNAL WALLS

From Page B3.12/10 - DOORS
85,753.85
156,207.00
From Page B3.13/4 - INTERNAL WALL FINISHES
57,544.00
From Page B3.14/6 - INTERNAL FLOOR FINISHES
95,904.00
From Page B3.15/6 - INTERNAL CEILING FINISHES
91,083.00
From Page B3.16/2 - EXTERNAL WALL FINISHES
24,584.00
From Page B3.17/5 - EXTERNAL FLOOR & CEILING

FINISHES
35,569.00
From Page B3.18/17 - FITTINGS & FURNISHINGS

From Page B3.19/7 - SANITARY APPLIANCES
Carried Forward
J198
4,372.00
313,110.00
97,321.00
2,041,522.90
Addendum No.1
B3.SUM/2
Item
Description
Brought Forward
Unit
Rate
Amount B$
2,041,522.90
From Page B3.20/7 - PLUMBING INSTALLATIONS
To Final Summary
J198
Qty
30,557.00
2,072,079.90

J198 Farmasi Admin Building Bill PDF

Uploaded by

Copyright:

Available Formats

J198 Farmasi Admin Building Bill PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

J198 Farmasi Admin Building Bill PDF

Uploaded by

Copyright:

Available Formats

B3.

The quantities given for piling works are approximate

Refer to the Specification and Trade Preambles for items

All piling works are to commence from reduced formation

The rates shall be deemed to include additional costs

Contractor is to submit sample and technical

Prices for concrete piles shall include for all

for piling required in building substructure work

250mm diameter (In 220 No.)

to 250mm diameter pile

250mm diameter with 650mm long anchor bar projection

CONCRETE PILES (ALL PROVISIONAL)

test load first single working pile to minimum two times

test load subsequent single working pile to minimum two

Submitting piling records duly signed by the Contractor

piling records in triplicate of all piles

From Page B3.1/2

To Bill No. 3 Summary

LOWEST SLAB & FOUNDATIONS

Excavating cuttings and filling to make up to finished

Contrary to SMM, pipe sleeves and associated dowel

not exceeding 2.00m deep

Excavating pits for pile caps, column or stanchion bases

not exceeding 2.00m deep

filling to make up levels

filling to make up levels

to all soil in contact with the building structure

REINFORCED INSITU CONCRETE WORK; IN

pile caps, column or stanchion bases and the like

REINFORCED INSITU CONCRETE WORK; IN

Ground slabs; forming or laying to falls; including extra

in pile caps, column and stanchion bases and the like

in pile caps, column and stanchion bases and the like

16mm General straight and bent bars

in pile caps, column and stanchion bases and the like

20mm General straight and bent bars

in pile caps, column and stanchion bases and the like

25mm General straight and bent bars

REINFORCED INSITU CONCRETE WORK; IN

pile caps, column and stanchion bases and the like

Sloping surfaces; soffits of slabs, staircases and the like

100mm - 200mm wide

100mm - 200mm wide; curved

on blinded surfaces of excavation

LOWEST SLAB & FOUNDATIONS Collection

From Page B3.2/1+1

From Page B3.2/2

From Page B3.2/3

To Bill No. 3 Summary

Beams, braces, cantilevers and the like

in isolated columns, beams and lintols

in isolated columns, beams and lintols

in isolated columns, beams and lintols

in isolated columns, beams and lintols

in isolated columns, beams and lintols

piers, columns, stanchions struts and the like

strutting 3.50m - 5.00m high

To Bill No. 3 Summary

High tensile steel bar reinforcement