New and improved Products

in the FIBRO Standard Parts

Catalogue 2008
2130.12.
Lifter Studs
with cable
securing
device
c 10

2022.16.45.
Guide Pillars
with groove
to CNOMO
standard
d 29, d 123

2102.71.
Guide Bushes
with Collar
to AFNOR,
Bronze
d 67

2132.10.x.1.
Bushes for
Lifting Bolts
c 25

2091.71.
Guide Pillars
with groove
to CNOMO
standard
d 84 - d 86

2961.74.
Retaining
Plates
VDI 3357,
Bronze with
Non-Liquid
Lubricant
d 128

2192.12.
Hexagon
Socket Head
Cap Screws
DIN 912 /
ISO 4762
c 43

2053.70.
Thrust
Washers,
Bronze with
Non-Liquid
Lubricant
d 101

2961.79.
Retaining
Plates
VDI 3357,
Steel
d 129

2192.61.
Flat
Mushroom
Head Screws
with hexagon
socket
c 47

2087.72.
Oilless Guide
Bushes
with Collar,
Bronze with
Non-Liquid
Lubricant
d 111

2961.81.
Retaining
Plates
VDI 3357,
Steel with
Non-Liquid
Lubricant
d 130

2022.13.
Guide Pillars
with pilot
taper 5
d 28, d 122

2102.70.
Guide Bushes
with Collar
to AFNOR,
Bronze with
Non-Liquid
Lubricant
d 67

2962.78.45.
Sliding Pads,
Bronze, with
non-liquid
lubricant,
to CNOMO
standard
d 145

2962.78.
Sliding Pads,
Bronze with
Non-Liquid
Lubricant
d 146 - d 147

2960.88.
Sliding Pads,
VDI 3357,
Steel
d 162

2965.82.45.
Single-sided
Prismatic Sliding
Blocks, Steel,
to CNOMO
standard
d 197

2962.84.45.
Sliding Pads,
Steel, to
CNOMO
standard
d 148

2962.75.45.
Guide Bars,
with two sliding
surfaces, Bronze
with Non-Liquid
Lubricant, to
CNOMO standard
d 165

2967.11.
Sliders for
transverse bolt
guide
d 201

2962.85.
Sliding Pads,
Steel with
non-liquid
lubricant
d 150

2962.70.45.
Angled
Guide Gibs,
Bronze with
non-liquid
lubricant,
to CNOMO
standard
d 179

2445.11.
Centring Pins
to Daimler
standard
d 215

2960.44.45.
Sliding Pads,
Steel, with
oil lubricating
grooves,
to CNOMO
standard
d 158 d 159

2963.84.
Sliding Blocks,
VDI 3357,
Bronze with
Non-Liquid
Lubricant
d 189

2072.48.45.
Screw Clamps
to CNOMO
standard
d 224

2960.54.45.
Sliding Pads,
Bronze, with
oil lubricating
grooves,
to CNOMO
standard
d 160

2963.85.
Prismatic
Guides, Steel
d 189

2073.45.
Securing
Flanges
d 224

2960.81.
Sliding Pads,
VDI 3357,
Bronze with
Non-Liquid
Lubricant
d 161

2965.80.45.
Single-sided
Prismatic Guides,
Bronze, with
non-liquid
lubricant,
to CNOMO
standard
d 196

2443.13.
Guide with
Part Position
Control
d 228

2361.1.
Precision
Dowel Pins
with internal
extracting
thread similar
to DIN EN ISO
8735/ISO 8735
e 110

2478.20.20.1.
2478.20.20.2.
Guide Pillars
and Sleeves
for Lifting
Units to
Daimler
standard
f 102 f 103

2480.00.51.05
Box Spanner
f 250

2351.1.
Precision
Dowel Pins
similar to DIN
EN ISO 8734/
ISO 8734
e 113

2482.73. ... .1
Gas Springs,
small
dimensions
and low forces
f 130 f 131

2491.
Air Springs, to
VW standard
Please request
your catalogue
f 279

237.1.
Hardened
Ejector Pins,
similar to
DIN 1530,
Shape A ISO 6751
e 116

2480.12.00750.
Gas Springs
f 144 f 145

2480.019.45.
Thrust Plate
f 285

244.9.
Spacer Tubes
f 73

2480.011.10000.
Flange Plate
f 152

2480.00.23.13.
Anti-scuff
spiral
f 295 f 304

244.10.
Stop Washers
f 74

2487.12.00750.
2487.12.01000.
Gas Springs
with increased
spring force
Power Line
f 184 f 187

2480.00.39.04
Multiple
Control Fitting,
Connection
Adaptor
f 310

244.17.
Shoulder
Screws
f 78

2486.12.
Speed
ControlTM
SPC Gas
Springs,
cushioned
f 227 f 237

2198.50.55.
Spring
mounted
Rollers
j 9

subject to alterations

A Die Sets

Cast Iron, Steel and Aluminium

Die Set Press Units, Lamination Die Set Units, Tooling Pallet Die Sets

B Precision Ground Plates and Flat Bars

Steel and aluminium Plates

Flat and square Tool Steels

C Lifting and Clamping Devices

Shanks, Lifter Studs and Lifting Hooks, Eyebolts

Clamping Claws, Screws and Bolts

D Guide Elements

Pillars, Bushes, Mounting Flanges,

Ball Cages, Oilless Guide Elements

E Ground Precision Components

Punches and Matrixes,

Pins, Ejector Pins, Gauge Pins

F Springs

Compression Springs, Gas Springs, Elastomer Springs

Spring and Spacer Units

G Elastomer-Bars, -Sheets, -Sections

FIBROFLEX and FIBROELAST-Sheets and -Profiles

H FIBRO Chemical Tooling Aids

Tooling Resin, Metal Adhesives,

Degreasing Agent, Corrosion Protection Agent, Oils

J Peripheral Equipment

for Presses, Tool Manifacture

Conveyor Belts, Assembly Aids

K Slide Units

Hydraulic Cam System, Cam Slide Units, Roller Slide Units

L Standard Parts for Mould Making

FIBRO - your production partner

FIBRO an internationally successful company.
As a market leader in Standard Parts, Rotary Indexing
Tables and Automation, FIBRO provides products and
solutions to ensure your production keeps moving.
So what is the secret of the FIBRO success? Products
developed in-house, tailor-made for the market with
uncompromising quality.

But good products are not enough on their own.

FIBRO combines excellent products, the know-how
and service competence of an internationally focused
company, matched to the actual needs of customers wherever they are.

Weinsberg plant

Hassmersheim plant

Rotary Tables

Standard Parts

From 1962 onwards FIBRO pioneered the design and

manufacture of rotary tables and soon gained an
enviable reputation.
FIBROTAKT indexing tables with face gear and ultra-high
precision indexing, together with dependable rigidity.
Drive options: pneumatic, hydraulic via rack and pinion
or electric with worm drive.
FIBROPLAN NC indexing tables with backlash
adjustment worm drive or torque motor for use in
machine tools for universal positioning and round and
multi-axis processes (simultaneous operation).
FIBROTOR revolving tables and indexing tables with
positive drive cam, offering very short cycle times even
when transporting heavy loads. Mainly used in nonmachining applications. Thousands of FIBRO units are
in use world-wide as integral key components in highoutput machinery.

Today the Standard Parts Division operates from

the Hassmersheim and Weinsberg works, which
manufacture a comprehensive range of standard parts
and maintain stocks ready for immediate despatch
world-wide. The machine tool, mechanical engineering
and systems engineering product ranges have been
developed to meet the needs of customers.
They include steel die sets, guide elements, oilless guide
elements and precision components such as punches
and matrixes, special steel compression springs, gas
springs, forming materials, metal bonding agents,
moulding resins, peripheral equipment for pressing and
tool making, tool slides with cam or roller slides and
hydraulic cam systems.
FIBRO has become renowned world-wide for its
comprehensive range of products in stock and its
readiness to deliver.

FIBRO is customer-focused world-wide. A welldeveloped network of sales and service points and
strategic partners ensure that help is always at hand.
This ensures technical advance, world-wide experience
in applications and rapid availability of products.

Facts and figures on FIBRO:

- founded 1959
- approximately 1,100 staff
- 80 representatives and service stations world-wide
- branches in France, USA, Switzerland and Singapore
- ISO 9001:2000 Quality Assurance and VDA 6.4 certification
- a company in the LPPLE Group

Hassmersheim plant

Automation
FIBRO has been active in the field of automation
and robotics since 1974 and offers one of the most
comprehensive ranges in this field. A cleverly designed
modular system based on translation units, rotary
units, grippers, and guide gantries with trolleys make
for easy construction of individual machines and
complete systems, ranging from simple pick & place
units right up to multi-axis robots. These seriesmanufactured modules with electric, pneumatic
or hydraulic drive, guarantee both high functional
reliability and cost-effective prices.
The modular gantry systems can solve virtually any
transporting problem using linear gantries, surface
gantries and extension gantries. These systems are
being used successfully in many industries worldwide. Applications include linking machine tools
(automotive production), tool changing in machining
facilities, palletising work pieces, unloading injection
moulding dies, PCB feeders, press linking, palletising,
stacking, loading and unloading, transporting and
flexible linking, storage and buffering of work pieces of
different sizes.

Since its establishment in 1974 GSA Automation

GmbH has developed to become a world market
leader in the manufacture of handling equipment and
transport systems. Over this period GSA has installed
over 200 fully automated systems for all the leading
automotive and machine tool manufacturers. GSA has
been a member of the FIBRO group since 2004.
Our production range consists of linear and surface
gantry systems, transport systems such as precision
roller guides, accumulating chain conveyors, pallet
accumulating conveyors and flexible decoupling
modules,shelf stacking systems and pallet mechanical
handling systems.
We can provide our customers with dependable
state of the art high performance systems from our
standard range. We take complete responsibility for the
complete project, starting with designing the solution
concepts at the design phase, right through to the final
handover of the ready-to-go system.

FIBRO GmbH

info@fibro.de www.fibro.com

Normalien
Standard Parts lments normaliss
Normalizzati Elementos normalizados
Postfach 1120 DE-74851 Hassmersheim
August-Laepple-Weg DE-74855 Hassmersheim
Tel. +49(0)6266-73-0* Fax +49(0)6266-73-237

Rundtische
Rotary Tables Plateaux Diviseurs
Tavole rotanti Mesas divisoras
Postfach 1120 DE-74183 Weinsberg
Weidachstrasse 41-43 DE-74189 Weinsberg
Tel. +49(0)7134-73-0* Fax +49(0)7134-73-120

DE

PLZ

Heinrich Siggel GmbH

Waldstrae 1 14163 Berlin
Tel. 030-802 9013 Fax 030-802 9014
siggel-gmbh@t-online.de
10000-16000

PLZ

Walter Ruff GmbH

Postfach 45 0118 28295 Bremen
Tel. 0421-438 78-0 Fax 0421-438 78-22
mail@praeziruff.de www.praeziruff.de
21000-29000, 49000

PLZ

Auendienst Karl-Heinz Keler

Mehlstrae 8 33729 Bielefeld
Tel. 0521-764 43 Fax 0521-770 75 58
Mobil 0170-564 34 15 k.kessler@fibro.de
30000-34000, 37000, 38000

PLZ

Auendienst Jrg Dyck

Walter Ruff GmbH
Postfach 45 0118 28295 Bremen
Tel. 0421-438 78-0 Fax 0421-438 78-22
Mobil 0173-925 22 43 mail@praeziruff.de
06000, 29000-31000, 37000-39000

PLZ

Auendienst Jrgen Mlling

Jupiterstrae 12 33739 Bielefeld
Tel. 05206-706 38 40 Fax 05206-91 63 35 87
Mobil-Tel. 0170-576 00 09
j.moelling@fibro.de
32000, 33000, 48000, 49000

PLZ

Schwab GmbH
Postfach 12 09 35323 Mcke
Bergwiesenstrae 10 35325 Mcke
Tel. 06400-80 11 Fax 06400-80 12
35000

PLZ

Ing. Bro fr Automation Dirk Ahke VDI

Zum Wenzelnberg 2a 40764 Langenfeld
Tel. 02173-270 41-0 Fax 02173-270 41-30
info@ing-buero-ahke.de
40000-48000, 50000-53000, 56000-59000

PLZ

Auendienst Lars Jahncke

Flockertsberg 17 42653 Solingen
Tel. 0212-254 34 62 Fax 0212-254 33 90
Mobil 0170-763 7125 l.jahncke@fibro.de
42000, 44000-45000, 46000, 58000-59000

PLZ

Auendienst Hartwig Hennemann

Staubenthaler Hhe 79
42369 Wuppertal
Tel. 0202-283 17 56 Fax 0202-759 55 80
Mobil 0175-296 59 30 h.hennemann@fibro.de
40000-42000, 47000, 50000, 52000-53000

PLZ

Normalien-Zentrale-Siegerland Bernd Kreitzberg

Postfach 1132 57225 Wilnsdorf
Rudersdorfer Strae 18 57234 Wilnsdorf
Tel. 02739-25 44 Fax 02739-4116
Mobil-Tel. 0170-274 27 95
mail@kreitzberg.de www.kreitzberg.de
51000, 57000

PLZ

Schlegel & Volk KG

Ditmarstrae 7 60487 Frankfurt
Tel. 069-970 6130 Fax 069-70714 69
info@schlevo.de www.schlevo.de
60000

PLZ

Auendienst Volker Hottes

Erzberger Strae 1 64846 Gro-Zimmern
Tel. 06071-39 2119 Fax 06071-39 =2145
Mobil 0171-957 79 89 v.hottes@fibro.de
53000-56900, 60000-66900

PLZ

Auendienst Henning Reiner

Am Eselsberg 53 89075 Ulm
Tel. 0731-950 80 544 Fax 0731-950 80 545
Mobil 0151-11 71 29 75 h.reiner@fibro.de
69000, 70000-71000, 73000-74000,
89100-89599

AT

PLZ

IRS Werkzeugmaschinen GmbH

Max-Planck-Strae 39 70736 Fellbach
Tel. 0711-95 57 20 Fax 0711-95 57 230
70000

PLZ

Auendienst Peter Finkenbeiner

Grner Weg 2 72218 Wildberg
Tel. 07054-83 07 Fax 07054-92 89 59
Mobil 0170-564 31 78
p.finkenbeiner@fibro.de
72000, 75000, 77000-79000, 88000-88699

PLZ

Auendienst Matthias Ehrenfried

Steigerwaldstrae 25 74172 Neckarsulm
Tel. 07132-34 56 90 Fax 07132-98 94 82
Mobil 0171-864 95 52 m.ehrenfried@fibro.de
70000-71000, 73000-74000, 97000

PLZ

Auendienst Manfred Wagner

Breslauer Strae 57 74372 Sersheim
Tel. 07042-350 86 Fax 07042-37 48 20
Mobil 0170-563 52 30 m.wagner@fibro.de
70000-73000, 88000-89000

PLZ

Auendienst Markus Rssl

Johann-Strau-Strae 16/1 74906 Bad Rappenau
Tel.: 07264-20 64 17 Fax 07264-20 64 18
Mobil 0160-97 25 23 93 m.roessl@fibro.de
66800-69000, 74700-76000, 97800-97900,
75000-77000

PLZ

Hamacher GmbH
Postfach 3308 78022 VS-Schwenningen
Grabenckerstrae 47 78054 VS-Schwenningen
Tel. 07720-349 69 Fax 07720-341 73
hamacher-normalien@t-online.de
www.hamacher-normalien.de
78000

BG

PLZ

Jugard & Knstner GmbH

Landsberger Strae 289/l 80687 Mnchen
Tel. 089-546 15 60 Fax 089-580 27 96
muc@jugard-kuenstner.de
www.jugard-kuenstner.de
80000-87000

BR

PLZ

Jugard & Knstner GmbH

Thomas-Mann-Strae 63 90471 Nrnberg
Tel. 0911-86 08 11 Fax 0911-86 08 90
nbg@jugard-kuenstner.de
www.jugard-kuenstner.de
90000-97000

PLZ

HELD Werkzeugmaschinen
Przisionswerkzeuge GmbH
Sorge 34 07545 Gera
Tel. 0365-824 91-0 Fax 0365-824 91 11
info@held-wzm.de www.held-wzm.de
07500

PLZ

Auendienst Stefan Schumann

Forstweg 44 07570 Weida
Tel. 036603-408 02 Fax 036603-602 37
Mobil 0170-564 51 15 s.schumann@fibro.de
98000-99000, 01000-09000

AU






BA


BE

CH





CL


CN









CY

info@fibro-gsa.de www.fibro-gsa.com

Automation
Automation Automatisme
Automazione Automatismos
Postfach 1120 DE-74851 Hassmersheim
August-Laepple-Weg DE-74855 Hassmersheim
Tel. +49(0)6266-73-0* Fax +49(0)6266-73-5238

Rath & Co. Ges. m.b.H.

Teiritzstrasse 3 2100 Korneuburg
Tel. +43 2262-608 Fax +43 2262-608-60
office@rath-co.at www.rath-co.at
Bruderer Presses Australia Pty. Ltd.
92 Trafalgar Street Annandale, NSW 2038
Tel. +61-419-400-995 Fax +61-296-864-809
Brudsyd@tpgi.com.au
Enmor Tool & Machine Co. Pty. Ltd.
Locked Bag 3003 Annandale, NSW 2038
Tel. +61-249-455-898 Fax +61-249-479-919
enmor@bigpond.com
Oro-Tech trgovina d.o.o.
Ulica borcev 1/b SI-2000 Maribor
Tel. +386 2-426 08 43 Fax +386 2-426 08 44
oro-tech.trgovina@siol.net
Schiltz S.A.
Chaussee de Gand 1034 1082 Bruxelles
Tel. +32 2 464 4830 Fax +32 2 464 4839
info@schiltz.be
ZVS Techniek B.V.
Grotiuslaan 3 NL-8024 XM Zwolle
Tel. +31 38-4541 017 Fax +31 38-4526 777
Mobil +31 6516 10605
rw@zvstechniek.nl www.zvstechniek.nl
Doedijns Fluitronics NV/SA
Zoning dAmay Alle II n 4 4540 Amay
Tel. +32 8 551 9696 Fax +32 8 551 9697
Bavaria 2002 EOOD
Pirotstr. 22 5100 Gorna Orjachoviza
Tel. +359 618 64158 Fax +359 618 64960
bavaria2002@gorna.net
FEST-04-EOOD
Hotel Lovetsch, Zimmer 04 5500 Lovetsch
Tel. + Fax +359 68 604 970
z.vasilev_fest_04@abv.bg
Industecnica Equipamentos Industriais Ltda.
R. Olvia Guedes Penteado 759 04766-001 So Paulo
Tel. +55-11-5548-4333 Fax +55-11-5522-4400
nogueira@industecnica.com.br
www.industecnica.com.br
Prodromus Automacao Modular
Av. Gen. Cavalcanti de Albuquerque, 123
Jardim Londrina - CEP 05638-010 So Paulo - SP
Tel. +55-11-3741-0897 Fax +55-11-3746-7997
prodromus@prodromus.com.br
Ultratec Service
Engenharia Comrcio e Representaes Ltda.
Rua7 de Julho - CEP 04760-070 So Paulo - SP
Tel. +55-11-5523 6239 Fax +55-11-5523 6239
ultratec@ultratecservice.com.br
FIBRO GmbH Zweigniederlassung
Brggbhlstrasse 70 3172 Niederwangen b. Bern
Tel. +41 31-981 07 52 Fax +41 31-981 07 53
sales.ch@fibro.com www.fibro.com
Brtsch/Regger Werkzeuge AG
In der Luberzen 1 8902 Urdorf
Tel. +41-44 736 63 63 Fax +41-44 736 63 00
central@brw.ch www.b-r.ch
Bermat S.A.
Coyancura 2283, Of. 601 Casilla 9781 Santiago
Tel. +56-2-231 88 77 Fax +56-2-231 42 94
bermat@bermat.cl www.bermat.cl
Forsteppe Precision Engineering
(Shanghai) Co., Ltd.
199-3 LuXing Road Liuzao Town
Nanhui County Shanghai, 201322
Tel. +86-21-68 16 01 69 Fax +86-21-68 16 01 62
ayft@forsteppe.com
FGC Precision (Guangzhou) Ltd.
Flat East, 5/F., Block A3, Bei Wei Ind. Area
Western Section, GET Guangzhou, 510730
Tel. +86-20-82 00 10 27 Fax +86-20-82 21 75 76
c.service@forsteppe.com
Militos Trading Ltd.
K. Erotokritou & A. Demetriou Ltd.
P.O.B. 27297 1643 Nicosia
Tel. +357 2-75 12 56 Fax +357 2-75 22 11
militos@cytanet.com.cy
subject to alterations

0 17782 07/2008 83

Vertretungen
Representatives
Reprsentations
Rappresentantes
Representaciones

 CZ






DK










DZ


EE



EG



ES




FI



FR








GB











GR


HK




HR






HU


ID

0 17783 07/2008 83

IL


IN

Gore s.r.o.
Prstavn 6 CZ-63500 Brno-Bystrc
Tel. +420 5-41 59 25 18 Fax +420 5-41 59 25 19
gore@gore.cz www.gore.cz
SK Technik, spol. s r.o.
Merhautova 20 61300 Brno
Tel. +42 0 545 429 511 Fax +42 0 545 211 275
info@sktechnik.cz www.sktechnik.cz
EBI A/S
Metalbuen 28 Postbox 79 2750 Ballerup
Tel. +45 44-97 81 11 Fax +45 44-68 06 26
ebi@ebi.dk www.ebi.dk
Hoff Vakuumteknik
Baunegrdsvej 12 2820 Gentofte
Tel. +45 3964 1476 Fax +45 3964 1473
ndh@hoff-vakuum.dk www.hoff-vakuum.dk
PMC Technology A/S
Klausdalsbrovej 1 2860 Sborg
Tel. +45 7021 2121 Fax +45 7021 2122
info@pmctechnology.dk www.pmctechnology.dk
Pneumacoupe Blida Boufarik
86 Bld. Menad Mohamed Boufarik, 09400 Blida
Tel. +213 3-47 56 55 Fax +213 3-47 56 55
pneumacoupe@yahoo.fr
Cle Baltik O
Piirime Street 4 Tnassilma
76401 Saku County Harjumaa
Tel. +372 680 3532 Fax +372 668 8679
info@clebaltic.com www.clebaltic.com
Smeco
68, Abdel Rahman El Raffei St.
11351-Heliopolis West, Cairo
Tel. +20 2-620 06 71 Fax +20 2-620 06 74
r.metwally@tedata.net.eg
Daunert Mquinas-Herramientas, S. A.
C/. Tirso de Molina s/n Esquina C/. Albert Einstein
Polgono Industrial Almeda
08940 Cornell de Llobregat Barcelona
Tel. +34 93-475 14 80 Fax +34 93-377 64 64
info@daunert.com www.daunert.com
OY Christer Lindholm Eng. AB
Santalantie 25, PL. 66 10901 Hanko
Tel. +358(0)207 519 600
Fax +358(0)207 519 619
info@clegroup.eu www.clegroup.eu
FIBRO France SARL
19/21, rue Jean Lolive 93170 Bagnolet
B.P. no 129 93172 Bagnolet Cedex
Tl. +33 1-43-62-18-80 Fax +33 1-48-59-17-47
info@fibro.fr www.fibro.com
Secteur Franche Comt
Codimec SA
Rue des Maurapans ZAC de Valentin
BP no. 3051 25046 Bsanon Cedex
Tel. +33 3-81-88-83-11 Fax +33 3-81-88-05-45
Bruderer UK Ltd.
Unit H, Cradock Road
Luton Bedfordshire LU4 0JF
Tel. +44(0)1582-563 400
Fax +44(0)1582-493 993
mail@bruderer.co.uk www.bruderer-presses.com
W. & H. Eves Ltd.
Unit 5 The Aviary, Woodgate
Crawley Lane, Kings Bromley
Staffordshire DE13 7JF
Tel. +44(0)1543-47 34 44
Fax +44(0)1543-47 21 52
t.lambon@wheves.co.uk
Mek-Maria Koutseris & Co.
Pyloy 100 10441 Athen
Tel. +30 210-522 05 57 Fax +30 210-522 12 08
mekouts@hellasnet.gr www.mek.com.gr
Forsteppe Asia Ltd.
Unit 207, 2/F Shing Chuen Industrial Building
25-27 Shing Wan Road
Tai Wai, Shatin, N.T., Hong Kong
Tel. +852-26 01 13 68 Fax +852-26 01 16 38
annie.li@forsteppe.com www.forsteppe.com
Koncar-Alati d.d.
Fallerovo Setaliste 22 10000 Zagreb
Tel. +385 1 3670 900 Fax +385 1 3870 932
alati@koncar-alati.hr www.koncar-alati.hr
Oro-Tech trgovina d.o.o.
Ulica borcev 1/b SI-2000 Maribor
Tel. +386 2 426 08 43 Fax +386 2 426 08 44
oro-tech.trgovina@siol.net
Rath & Co. Ges. m.b.H.
Teiritzstrae 3 AT-2100 Korneuburg
Tel. +43 2 262-608 Fax +43 2 262-608-60
office@rath-co.at www.rath-co.at
Pt. Multitanaka Sejahtera
Jl, Tanjung Duren Raya 21 A Jakarta 11370
Tel. +62 21-56 44 741 Fax +62 21-56 40 720
tanaka@cbn.net.id
A. J. Englander 1980 Ltd.
13 Harechev Street Tel Aviv 67771
Tel. +972 3-537 36 36 Fax +972 3-537 33 25
info@englander.co.il www.englander.co.il
NN Combined Engineering Agencies Pvt. Ltd.
Dr. Ranji Block, First Floor
125 M. G. Road Secunderabad 500 003 AP
Tel. +91 40-2784 42 79 Fax +91 40-27 84 16 52
mail@nncea.com www.nncea.com

subject to alterations

IN










IR


IT







JP


KR
















LV


MA



MY


NL












NO


NZ


PE



PL


PT

FIBRO India Standard Parts Pvt. Ltd.

Plot No. 1, Gat No. 107
at Post: Pirangut, Tal. Mulshi, Dist. Pune 411042
Tel. +91-20-66 75 05 20 Fax +91-20-66 75 05 24
info@fibro-india.com www.fibro.com
Antaral Society
Sanganna Dhotre Marg, Ghaneshkhind Road
Pune - 411016
Tel. +91 20-25 65 62 39 Fax +91 20-25 65 64 87
info@fibro-india.com www.fibro.com
Eximrad Co.
268 Dr. Mofatah Ave. Tehran 15848
Tel. +98 21-88 8212 03 Fax +98 21-44 64 46 56
eximrad@yahoo.com
Millutensil S.R.L.
Corso Buenos Aires, 92 20124 Milano
Tel. +39 02-29 40 43 90 Fax +39 02-204 66 77
info@millutensil.com www.millutensil.com
NC Componenti S.R.L.
Via F. Raimondo, 11/B
10090 Cascine Vica-Rivoli (TO)
Tel. +39 011-957 52 22 Fax +39 011-957 51 13
info@nccomponenti.it www.nccomponenti.it
Tomita Co. Ltd.
1-18-16, Ohmorinaka, Ohta-ku Tokio 143
Tel. +81 3-37 65 11 88 Fax +81 3-37 65 17 13
bando@tomitaj.co.jp
Jinsan Commercial Co. Ltd.
Rm 103, 12 Dong, Anyang Intl.
Circulation Complex
#555-9, Hogye-Dong, Dongan-Gu
Tel. +82 31 479 3181 Fax +82 31 479 3180
jiscco@hotmail.com
Jinsung Trading Corp.
Dong Wo Bldg. 303
#520-2, 2AV Choryang Dong Gu, Pusan
Tel. +82 51 466 5462/3 Fax +82 51 466 5464
jstrade@chol.com
DSK Service Co., Ltd.
#5-3, the 3rd type of apartement factory, 36,
Palryong-dong, Changwon, Kyungnam, Korea
Tel. +82 55 237 2100 Fax +82 55 237 2101
dsk@dskservice.co.kr
Seokyung Engineering Co., Ltd.
#807-809, 1st Bldg., Lotte IT Castle, 550-1
Gasan-dong, Geumcheon-gu, Seoul 153-803
Tel. +82 2 2026-7610/-7618 Fax +82 2 2026-8629
www.seokyung.com
Cle Baltik O
Katlakalna 11C 1073 Riga
Tel. +371 713 9991 Fax +371 713 9992
info@clebaltic.com www.clebaltic.com
Chiba Industrie
Bd. Mohamed Bouziane Lot 96
Hay My Rachid Casablanca
Tel. +212 22 72 69 83 Fax +212 22 72 69 83
chibaindustrie@menara.ma
FIBRO Asia Pte. Ltd.
121, Genting Lane, #02-02 Singapore 349572
Tel. +65 68 46 33 03 Fax +65 68 46 33 02
info@fibro-asia.com www.fibro.com
Jeveka B.V.
Postbus 22966 Keienbergweg 8
1100 DL-Amsterdam 1101 GB Amsterdam
Tel. +31 20-342 03 42 Fax +31 20-342 03 02
info@jeveka.com www.jeveka.com
ZVS Techniek B.V.
Grotiuslaan 3 8024 XM Zwolle
Tel. +31 38-4541 017 Fax +31 38-4526 777
Mobil +31 6516 10605
jh@zvstechniek.nl www.zvstechniek.nl
Item Systems B.V.
Zwarte Zee 40-42 3144 DE Maassluis
Tel. +31 10-593 72 60 Fax +31 10-592 85 38
info@item-systems.nl www.item-international.com
Kaspo Maskin AS
Hoeggveien 66 7489 Trondheim
Tel. +47 73 96 96 00 Fax +47 73 96 96 01
kaspo@kaspo.no www.kaspo.no
APS Tooling Ltd.
145 Station Road Penrose 1006 Auckland 6
Tel. +64 9 579 2208 Fax +64 9 579 2207
info@apstools .co.nz
Ing. E. Brammertz S.c.r.l.
Av. Jos Pardo 182 OF. 905
Apartado 0173 Miraflores, Lima 18
Tel. +51 1 445 81 78 Fax +51 1 445 19 31
braming@terra.com.pe
Laska Technika Przemyslowa Sp.z.o.o.
Towarowa 35 43-100 Tychy
Tel. +48 32-326 24 50 Fax +48 32-326 24 51
laska@laska.com.pl www.laska.com.pl
Ferrometal Lda.
Estrada Manuel Correia Lopes
Rua da Rosita, Lote 12 Conceio da Abboda
2785-543 S. Domingos de Rana-Cascais
Tel. +351 21-444 71 60 Fax +351 21-444 71 69
ferrometal@ferrometal.pt

PT




RO


RU


SA


SE











SG


SI


SK








TH




TR






TW



US



YU


ZA

Seri Lda.
Zona Industrial da Varziela
Av. Jos Ramos Maia Lote no 3, Apartado 197
4481-911 Vila do Conde
Tel. +351 252 24 85 40 Fax +351 252 24 85 41
seri@seri.pt
Daniel Andrei Sibisan
Str. Zizinului nr. 8, ap. 21 Brasov, 500414
Tel. +40 744 44 05 83 Fax +40 368 78 00 08
d.sibisan@fibro.de www.fibro.com
CLE Group Ru Ltd.
Sofyiskaya Str. 66 192289 S. Petersburg
Tel. +7 812 575 1592 Fax +7 812 324 7388
info@cleru.ru www.cleru.ru
Abdullah Yahya Munshi Est
P. O. Box 20123 21455 Jeddah
Tel. +966 2-652 35 89 Fax +966 2-652 35 48
fibro.sa@gmail.com
Lideco AB
Verkstadsvgen 4 51463 Dalstorp
Tel. +46 321 53 03 50 Fax +46 321 603 77
info@lideco.se www.lideco.se
Dankab Verktygsmaskiner AB
Box 4002 18104 Liding
Larsbergsvgen 12b 18139 Liding
Tel. +46 854 44 03 40 Fax +46 854 44 03 45
info@dankab.se www.dankab.se
AB Sigfrid Stenberg
Box 914, 571 29 Nssj
Tel. +46 702 89 59 44 Fax +46 31 45 60 53
peter.fellsner@stenbergs.se http://stenberg.ntservern.se
FIBRO Asia Pte. Ltd.
121, Genting Lane, #02-02 Singapore 349572
Tel. +65 68 46 33 03 Fax +65 68 46 33 02
info@fibro-asia.com www.fibro.com
Oro-Tech trgovina d.o.o.
Ulica borcev 1/b SI-2000 Maribor
Tel. +386 2 426 08 43 Fax +386 2 426 08 44
oro-tech.trgovina@siol.net
Dekona s.r.o. Montages et Outillages
Buzuluck 3 96001 Zvolen
Tel. +421 45 5401 531 Fax +421 45 5242 603
office@dekona.sk www.dekona.sk
SK Technik, spol. s.r.o.
Merhautova 20 61300 Brno
Tel. +420 5-45 21 16 66 Fax +420 5-45 21 12 75
info@sktechnik.cz www.sktechnik.cz
Gore s.r.o.
Prstavn 6 CZ-63500 Brno-Bystrc
Tel. +420 5-41 59 25 18 Fax +420 5-41 59 25 19
gore@gore.cz www.gore.cz
LuBo (Thailand) Co., Ltd.
777 Moo 15 Soi Thai Prakarn 2
Theparak Road km. 21
Bangsaothong, Samut Prakarn 10540
Tel. +66-2-317-6226 Fax +66-2-317-6224
sun_t@luboasia.com www.luboasia.com
Ender Kesici Ve Teknik Takimlar Ltd. Sti.
Tersane Caddesi No. 16 80000 Karaky/Istanbul
Tel. +90 212-253 26 00 Fax +90 212-254 57 91
enderltd@turk.net www.enderltd.com
Fikret Erdogan ve Ort. Koll. Sti.
Otakilar Cad. No. 56 34050 Eyp-Istanbul
Tel. +90 212-544 87 53 Fax +90 212-567 99 66
tuncerdogan@fikreterdogan.com
SunNan Enterprises Co. Ltd.
2F, No. 7, Alley 6, Lane 235 Pao-Chiao Road
Hsin-Tien City Taipei
Tel. +886 2-29 17 6454 Fax +886 2-29 11 0398
sun-ss@umail.hinet.net
FIBRO Inc.
139 Harrison Ave. Rockford, IL 61104
P. O. B. 5924 Rockford, IL 61125
Tel. +1 815-229 13 00 Fax +1 815-229 13 03
info@fibroinc.com www.fibro.com
Andrija Tesic, Dipl. Ing.
Partisanska 12/a-II 11090 Beograd
Tel. +381 11-2338 362 Fax +381 11-2338 362
atesic@verat.net
Herrmann & Herrmann Pty. Ltd.
24, Shaft Road P. O. B. 13030 Knights 1413
Tel. +27 11 828 01 00 Fax +27 11 828 60 21
hermstools@mweb.co.za www.hermstools.com

Index
A

Page

Absorbing washers, adjusting washers, adjusting plates

G 15
Adjusting washers
D 208D 212
Air springs
F 279
All-steel die sets
A 25A 61
Aluminium die sets
A 36A 41
Aluminium plates, surface ground
A 35, B 5
Anaerobic metal adhesives
H 10
Angled guide gibs
D 178D 185
Anti-corrosion spray lacquer FIBROLIT RS
H 13
Anti-scuff spiral
F 295F 304
Assembly of guide element
dimensional requirements and tolerances
D 230D 234
B
Ball bearing guides
D 52D 61, D 77D 81, D 94D 95
Ball bearing inserts, with and without collar
J7
Ball bearing rails
J7
Ball cage retainers
D 219
Ball cages, brass
D 51, D 56D 58, D 59
Ball cages, small dimensions
D 12
Ball guide units to Daimler standard
D 32
Ball guides for highest stroking speeds
D 24
Ball-lock retainers, triangular, and accessories
E 86E 89
Ball-type load-bearing bolts
C 14
Blade ejectors
E 120E 121
Bolt guides
D 109/1
Bolt-on guide pillars
D 15
Boxed clamping tool sets
C 28, C 29
Brass ball cages
D 51, D 56D 58, D 59
Bushes for lifting bolts
C 25
C
Cage retainers
D 29
Cam slide units
K4
Carbide punches
E 25
Cast iron die sets
A 9A 24
Casting resin FIBROLIT ZWO (epoxy tooling resin)
H 7H 9
Casting/tooling resins: application examples
H 17H 19
Casting/tooling resins: thinning agent
H9
Centering pin for lifting flange
C 15/4
Centring inserts
D 213
Centring pins to Daimler standard
D 215
Centring pins to VW standard
D 214
Centring units
D 208D 213
Clamping elements
C 16C 29
Collared guide bushes, sintered ferrite,
carbonitrided, similar AFNOR
D 82, D 91D 93
Collared guide bushes, similar AFNOR
D 94D 96
Colour code combinations/sliding guide clearances
D 10D 11
Combination spring- and spacer units
F 51F 55, F 71F 80
Compensation discs
D 213, F 106
Compression pads FIBROFLEX
F 112/1
Compression springs
F 7F 47
Compression springs, round wire
F 40F 49
Compression springs, special rectangular crossection
F 9F 39
Concertina shrouds
D 216D 217
Controll fittings for gas springs
F 307 F 314
Conveyor belt accessories
J 18J 21
Conveyor belts, electrically controlled
J 11J 21
Conveyors, pneumatic
J 23J 26
Corrosion release spray FIBROLIT RS
H 13
Coupling spigots for die sets
C9
D
Damping discs
F 75
Date stamps
E 129E 130
Delimiting guides for conveyor belts
J 18J 19
Demountable flanged guide bushes, ball bearing type
D 88D90
Demountable flanged guide bushes, sintered ferrite
D 82D 84
Demountable guide pillars with collar
D 31
Demountable headed guide bushes, ball bearing type
D 77, D 81
Demountable headed guide bushes, sintered ferrite,
carbonitrided
D 66D 70
10

Page

Demountable pillars AFNOR

D 18
Demountable pillars, DIN 9825/ISO 9182-4
D 18
Demountable pillars, endwise bolt-on type
D 17
Demountable pillars, stripper-mounted
D 35D 39
Demountable pillars, with collar to WDX
D 30, D 124
Die lifting bolts
C 15/2C 15/3
Die set shanks
C8
Die set units
A 40A 42
Die set units for progression/lamination dies
A 47A 53
Die sets, all-steel
A 25A 61
Die sets, cast iron
A 9A 24
Die sets to customers specifications
A 30A 33, A 43A 46
Disc springs DIN 2093
F 50
Dished stacking washers for FIBROFLEX springs
F 54, F 70
Dowel pins
E 109, E 111
Dowel pin extractor FIBROZIPP
E 109
Dowel pins with internal extracting thread
E 109
Drill bushes, headless and headed
E 113
Dynamic strippers
E 84
Dynamometers for gas springs
F 316F 317
E
ECO LINE guide bushes, bronze
ECO LINE guide bushes, bronze plated
ECO LINE guide pillars
Ejector pin units
with gas spring
Ejector pins
Ejector sleeves
Elastomer pads and sheets
Elastomer springs

D 74D 75
D 71D 73
D 33
F 89F 91, F 123F 125
E 116E 123
E 124E 125
G 8, G 12
F 56F 67

Elastomer strippers FIBROFLEX

Embossing elastomers
Epoxy resins FIBROLIT ZWO and FIBROFIX SECHS
Epoxy tooling/casting resins: application examples
Extractor tool FIBROZIPP
Eyebolts

F 86F 87
G 17G 19
H 6H 8
H 17H 19
E 109
C 12C 21

F
FIBROELAST hollow round sections
FIBROELAST round sections
FIBROELAST sheets
FIBROELAST tubular spring elements
FIBROFIX SECHS tooling Epoxy resin, in cartridges
FIBROFLEX channel sections
FIBROFLEX compression pads
FIBROFLEX elastomer strippers
FIBROFLEX hollow sections
FIBROFLEX pads and sheets
FIBROFLEX round sections
FIBROFLEX setting-up bumpers
FIBROFLEX shedder inserts
FIBROFLEX square sections
FIBROFLEX triangular sections
FIBROFLEX tubular spring elements
FIBROLIT ARF marking-out blue
FIBROLIT casting/tooling resins:
application examples
FIBROLIT LD grease and oil
FIBROLIT MK metal adhesive
FIBROLIT RL penetration lubricant spray
FIBROLIT RS clear lacquer spray
FIBROLIT TW release agent (on wax basis)
FIBROLIT ZWO tooling/casting resin, in cans
FIBROZIPP dowel pin extractor
Fine blanking die sets
Flat mushroom head screws with hexagon socket
Flat tool steel
Foil shims
Forming Elastomer FIBROFLEX
Forming Sections FIBROFLEX
Four-pillar die sets, all-steel
Four-pillar die sets, aluminium

G 13
G 13
G 12
F 66F 67
H7
G9
F 83
F 82
G 9G 13
G8
G 10
F 85
F 82
G8
G 11
F 56F 65, F 76
H 13
H 17H 19
H 14
H9
H 13
H 13
H 14
H7
E 109
A 24
C 47
B 6B 9
B 10
G 2G 15
G 8G 11
A 26A 29a
A 36A 39a
subject to alterations

Index
Page

Gas spring accessories

F 281 F 328
Gas springs
F 107 F 280
Gas springs, controllable
F 278
Gauge pin boxes, wooden
E 125 E 126
Gauge pin holders
E 124 E 125
Gauge pins, high-precision
E 124 E 125
Gauge pins, with handle
E 126
Ground precision components
Registry E
Guide bars
D 135D 137, D 164D 171
Guide brackets to VDI 3387
D 172D 173
Guide bushes for punches
E 74
Guide bushes sliding/ball bearing types
D 54D 97
Guide bushes, small dimensions
D 12
Guide bushes with collar, ECO LINE
D 71D 76
Guide elements assembly requirements/
Dimensions/tolerances
D 230D 234
Guide elements, oilless
D 99D 207
Guide pillars DIN 9825/ISO 9182
D 14D 17
Guide pillars DIN 9825/~ISO 9182-2
with internal thread
D 15
Guide pillars for large press tools
D 22D 30, D 116D 124
Guide pillars for lifting units to Daimler standard
F 102F 103
Guide pillars, small dimensions
D 12
Guide pillars with collar
D 30D 31
Guide pillars with collar, ECO LINE
D 33
Guide pillars with groove to CNOMO standard
D 29, D 123
Guide pillars with pilot taper to VW standard
D 28, D 122
Guide pins for FIBROFLEX springs
F 54, F 70
Guide units Million Guide
D 40D 43
Guides without and with part position control
D 226D 228

L
Liner bushes for dowel pins
Load/force diagrams for elastomer springs
Locating Bolts for FIBROFLEX
and FIBROELAST round springs
Locking adhesive for screws, nuts etc.
Long-term lubrication for sintered metal
Loss prevention for conveyor belts
Lubricant

Page
E 110
F 54 F 67
F 84
H 10
H 14
J 19
H 14

M
Manifold-System
Marking-out spray FIBROLIT ARF
Matrixes FIBROFLEX
Matrixes
Metal adhesive FIBROLIT MK
Mounting flanges for pillars and bushes,
for sliding guides and ball bearing guides

F 280
H 13
G 2 G 27
E 65 E 77
H9
D 44 D 49

N
Nitrogen die cylinders

F 107F 328

O
Oil, high-performance spindle oil
Oilless guide bushes
Oilless guide elements
Oilless guide elements, assembly guidelines
Overrun cams

H 14
D 102D 115
D 99D 207
D 230D 234
D 176D 177

H
Hardener for epoxy tooling resins/adhesives
H7
Head type punches with shedder pins
E 22E 23
Head type quill bushes
E 16
Headed and headless matrixes
E 65E 77
Headed ejector pins
E 114E 121
Headed guide bushes, demountable
D 66D 70, D 77D 81
Headed guide bushes to DIN 9831/ISO 9448-6,
steel, with bronze coated internal bore
D 63D 65
Headed punches
E 19E 25
Helical springs for ball cage retention
D 218
Hexagon collar nuts
C 22
Hexagon nuts
C 21
High-performance compression springs
F 7F 47
High-performance spindle oils
H 14
High-precision gauge pins
E 124E 125
Hoisting snap links
C 12/1
G 13
Hollow round sections of FIBROELAST
Hollow round sections of FIBROFLEX
G 10
Hollow square sections of FIBROFLEX
G9
Hollow stripper-mounted pillars
D 37

Hollow triangular sections of FIBROFLEX

G 11
Hydraulic cam system
K3
I
Injection gun for epoxy resins
Inspection specifications for die sets

H7
A7

L
Lamination/progression die set units
Lateral profiles for conveyor belts
Lifter hooks
Lifter pins for press tool strips
Lifter studs bolt on type
Lifter studs screw in type
Lifter studs with cable securing device
Lifting bolts with safety ring
Lifting eyebolts
Lifting flanges
Lifting units to Daimler standard
Liner bushes for demountable pillars

subject to alterations

A 47 A 53
J 18 J 19
C 12
D 221
C 10 C 11
C9
C 10
C 15/2 C 15/3
C 12
C 15/4 C 15/5
F 102 F 103
D 20 D 21

P
Pallet tooling die sets
A 55A 61
H 13
Penetration lubricant spray FIBROLIT RL
Piercing die bushes
E 65E 77
Piercing punches
Registry E
Pillars
D 12D 18, D 22D 39, D 116D 124
Pillar wipers
D 220
Pilot pins with tapered tip
E 38, E 48, E 58
Pilot pins with parabolic tip
E 39, E 49, E 59
Pilot unit to Daimler standard
E 60
Pneumatic conveyors
J 35J 38
Polyurethane forming elastomer
G 2G 15
Polyurethane springs
F 540F 67
Polyurethane
G 2G 27
Pot housings for FIBROFLEX springs
F 69
Power clamp, sliding
C 19/1C 19/2
Precision components
Registry E
Precision dowel pins (parallel)
(DIN EN ISO 8734/ISO 8734)
E 112
Precision dowel pins (DIN EN ISO 8735/ISO 8735)
with Internal extracting thread
E 109
Precision feeler gauges
B 10
Precision punches DIN 9861
E 12E 15
Precision punches ISO 8020
E 54E 59
Precision ejector sleeves
E 122E 123
Pressure plates, shock absorbing
F 285
Prismatic guides
D 188 D 197
Progression/lamination die set units
A 47A 53
Punches with shedder pin
E 22E 23, E 32E 33, E 36E 37,

E 42E 43, E 46E 47, E 56E 57
Punching and embossing unit
E 131
Q
Quick-change precision punches

E 30 E 47

11

Index
R

Page

Rectangular mounting flanges

D 28 D 33
Rectangular punches
E 108
Release agent spray (silicon oil)
H 14
Release agent spray FIBROLIT TW (wax-acetone solution)
H 14
Resin epoxy tooling/casting resins
H 7 H 9
Retainers for punches
E 86 E 102
Retaining bolts for FIBROFLEX tubular spring elements
F 76
Retaining disc with screw for demountable guide pillars D 19, D 31
Retaining plates, bronze or steel
D 128D 134
Ring blocks with position lock
C 23
Roller cages
D 62
Roller inserts with and without collar
J8
Roller rails
J8
Roller slide units
K5
Rotary safety-eye bolts
C 13, C 13/3
Round wire compression springs
F 81 F 83
Round sections of FIBROELAST
G 13
Round sections of FIBROFLEX
G 10
S
Screws
C 21 C 27
Screw clamps
D 222D 224
Securing flanges
D 224
Set screws for compression spring adjustment
F 81
F 85
Setting-up bumpers FIBROFLEX
Shanks
C8
Shedder inserts FIBROFLEX
F 112
Sheets of FIBROELAST
G 12
Sheets and pads of FIBROFLEX Elastomer
G8
Shock absorbing washers FIBROFLEX
G 15
Shoulder screw
F 78
Sintered ferrite guide bushes, carbonitrided
D 34, D 46, D 48
Sleeves for lifting units to Daimler standard
F 102F 103
Slide Units
Registry K
Sliding pads, bronze or steel
D 138D 163
Spigot holders for die sets
C9
Spigot holders
C9
Spindle oil
H 14
Springs
F 2F 328
Spring ejectors
F 88F 91
Spring accessories
F 73F 75
Spring rams for workpiece lifters
F 105F 106
Spring plungers
F 88F 91, F 123F 125
Spring system FIBROFLEX
F 54F 55
Spring units with FIBROFLEX springs
F 71
Spring units with steel compression springs
F 71F 74, F 79
Square sections of FIBROFLEX
G8
Square tool steel
B 6B 9
Stacking washers for FIBROFLEX springs
F 54, F 70
Standard Parts for Mould Making
Registry L
Stands for conveyor belts
J 21
Steel die sets, customized
A 30A 33
Steel plates, surface ground
A 34, B 4
Stepped blocks DIN 6318
C 20
Stripper-mounted pillars with collar
D 35D 37
Stripper-mounted retaining bushes, conical pillar fit
D 38
Strippers for blanking dies
F 86F 87
Stripping units
E 84, E 104, F 98F 100
Stock lifters
F 99F 100
Surface ground steel plates
A 34, B 4

12

T
T-guide bars
T-head bolts
Thinning agent for FIBROLIT ZWO Epoxy resin
Threaded cartridges
Threaded discs
Thrust pads
Thrust pins for quill bushes
Thrust washers
Tooling/casting resin in cans and cartridges
Tooling/casting resins: application examples
Tooling pallet die sets
Tool steel, flat and square
Triangular sections of FIBROFLEX
Tubular spring elements FIBROFLEX
Two-pillar die sets, all-steel
Two-pillar die sets, cast iron
Two-pillar die sets, aluminium

Page
D 186
C 23
H9
F 93F 979
F 95
F 286F 287
E 16
D 101, F 105
H 7H 9
H 17H 19
A 55A 61
B 6B 9
G 11
F 56F 65, F 76
A 26A 29a
A 9A 24
A 36A 39a

U
Urethane pads and sheets
Urethane springs

G8
F 54F 67

V
VDI head type punches
VDI quill punches and bushes

E 21
E 16

W
Washers DIN 6340
Washers, steel
Washers of FIBROFLEX
Wipers
Wooden boxes for high-precision gauge pins

C 40
F 73F 74
F 75, G 15
D 220
E 125E 126

subject to alterations

subject to alterations

13

Numerical Index
Order No

Page

201.01.
201.03.
201.05.
201.07.
201.11.
201.13.
201.145.
201.149.
201.21.
201.23.
201.26.
201.31.
201.33.
201.36.
201.39.
201.45.
2010.45.
201.46.
2010.46.
201.47.
2010.47.
201.49.
2010.49.
201.50
201.65.
2010.65.
201.66.
2010.66.
201.67.
2010.67.
201.69.
2010.69.
201.95.
201.96.
201.97.
201.98.
2011.45.
2011.49.
2016.
2017.
2018.
2018.00.

A 10
A 11
A 12
A 13
A 14
A 15
A 43
A 43
A 16
A 17
A 18
A 19
A 20
A 21
A 22
A 30
A 24 - A 29
A 31
A 24 - A 29
A 32
A 24 - A 28
A 33
A 24 - A 29
A 49 - A 55
A 30
A 36 - A 41
A 31
A 36 - A 41
A 32
A 36 - A 40
A 33
A 36 - A 41
A 57 - A 63
A 62
A 62
A 63
A 42
A 42
K 4, K 6, K 7
K 5
K 3
D 227

202.17.
202.19.
202.21.
202.22.
202.23.
202.24.
202.53.
202.55.
202.60.
202.61.
202.91.
202.92.
2020.62.
2020.63.
2020.64.
2021.29.
2021.39.
2021.43.
2021.44.
2021.46.
2021.50.
2021.53.
2021.58.
2021.64.
2022.12.
2022.13.
2022.15.
2022.16.
2022.16.45.
2022.17.
2022.19.
2022.25.
2022.29.

D 14
D 12, D 14
D 17
D 15
D 15
D 15
D 19
D 17
D 37
D 34
D 219
D 219
D 36
D 35
D 39
D 33
D 20
D 31
D 31
D 31
D 18
D 19
D 18
D 38
D 23, D 117
D 28, D 122
D 24, D 118
D 26, D 120
D 29, D 123
D 25, D 119
D 27, D 121
D 22, D 116
D 30, D 124

14

Order No

Page

2022.40.1.
2024.94.
2024.96.
2025.94.

D 25, D 119
D 40 - D 41
D 42 - D 43
D 32

2031.01.
2031.02.
2031.04.
2031.31.
2031.34.
2031.38.
2031.41.
2031.42.
2031.44.
2031.70.
2032.02.
2032.70.
2051.32.
2052.70.
2052.71.
2053.70.

D 45
D 46
D 47
D 45
D 46
D 47
D 45
D 46
D 47
D 44
D 49
D 49
D 50
D 102 - D 103
F 106
D 101

206.41.
206.49.
206.51.
206.54.
206.71.
206.72.
206.73.
206.75.
206.91.
206.92.
206.93.
206.94.
206.95.
2061.44.
2061.47.
2061.48.

2061.82.
2061.84.
2061.95
2062.44.

D 34
D 55
D 13
D 13
D 56
D 56
D 57
D 58
D 216
D 217
D 216
D 217
D 220
D 34, D 54
D 59
D 23, D 26,
D 120
D 62
D 62
D 220
D 34

207.45
207.48.
2071.45
2072.45.
2072.46

2072.47
2072.48.45.
2073.45.
2073.46.

D 31, D 222
D 96 - D 97
D 223
D 112, D 222
D 30, D 113,
D 124, D 222
D 114, D 223
D 115, D 224
D 115, D 224
D 22, D 116

2081.31.
2081.32.
2081.33.
2081.34.
2081.35.
2081.44.
2081.45.
2081.46.
2081.47.
2081.49.
2081.67.
2081.71.
2081.74.
2081.75.
2081.81.
2081.84.
2081.85.
2081.91.
2081.94.
2081.95.

D 66
D 67
D 68
D 69
D 70
D 77
D 78
D 79
D 80
D 81
D 60
D 74
D 75
D 76
D 63
D 64
D 65
D 71
D 72
D 73

Order No

Page

2082.70.
2082.71.
2085.70.
2085.71.
2085.72.
2086.70.
2086.71.
2087.70.
2087.71.
2087.72.
2087.73.

D 112
D 113
D 104
D 105
D 107
D 106
D 114
D 110
D 109
D 111
D 108

2091.31.
2091.32.
2091.34.
2091.44.
2091.45.
2091.46.
2091.67.
2091.71.
2091.72.
2091.74.

D 82
D 83
D 84
D 88
D 89
D 90
D 61
D 85
D 86
D 87

210.31.
210.34.
210.35.
210.39.
210.44.
210.45.
210.46.
210.85.
2102.70.
2102.71.
211.11.
211.12.
211.13.
211.14.
212.11.
212.15.
212.16.
212.16.1.

213.10.
2130.11.
213.12.
2130.12.
213.13.
213.14.
2131.10.
2131.11.
2131.15.
2131.20.
2131.21.
2131.22.
2131.23.
2131.25.
2131.26.
2131.40.
2132.10.
2132.10.1
2132.11.
2133.11.
2133.12.
2133.12.xxx.1.
2133.13.

D 91
D 92
D 93
D 21
D 94
D 96
D 95
D 97
D 115
D 115
C 8
C 8
C 8
C 8
A 44, C 9
A 44, C 9
C 9
A 44

2140.01.01.
2140.01.02.
2140.02.
2140.10.
2140.11.
2140.13.
2140.14.
2140.15.
2140.16.

C 48
C 49
C 39
C 34
C 35
C 33
C 33
C 32
C 34

C 12
C 10
C 9
C 10
C 11
C 11
C 12
C 13
C 14
C 15
C 18
C 23
C 21
C 19
C 20
C 22
C 24
C 25
C 27
C 29
C 28
C 28
C 31

Order No

Page

2140.17.
2140.18.
2140.19.
2140.20.
2140.21.
2140.30.
2140.32.
2140.33.
2140.34.

C 32
C 35
C 38
C 38
C 34 - C 35
C 41
C 39
C 40
C 40

2192.10.
2192.12.
2192.20.
2192.30.
2192.40.
2192.50.
2192.61.
2195.
2198.32.
2198.33.
2198.34.
2198.35.
2198.42.
2198.44.
2198.50.
2199.

C 40
C 41
C 44
C 46
C 45
F 295 - F 304
C 47
J 11 - J 21
J 7
J 7
J 8
J 8
J 7
J 8
J 9
J 23 - J 26

220.
2201.
2202.
2203.
2204.
2205.
221.
2211.
2212.
2213.
2214.
2215.
222.
2221.
2222.
2223.
2224.
2225.
223.
2231.
2232.
2233.
2234.
2235.
224.
2241.
2242.
2243.
2244.
2245.
225.
2251.
2252.
2253.
2254.
2255.
2261.
2262.
2263.
2271.
2272.
2273.
2276.
2280.01.
2280.02.
2281.
2282.01.
2291.

E 19
E 54
E 30
E 40
E 34
E 44
E 19
E 54
E 30
E 40
E 34
E 44
E 12
E 55
E 31
E 41
E 35
E 45
E 13
E 55
E 31
E 41
E 35
E 45
E 14
E 55
E 31
E 41
E 35
E 45
E 14
E 55
E 31
E 41
E 35
E 45
E 58
E 38
E 48
E 59
E 39
E 49
E 60
E 129
E 130
E 17
E 131
E 17

subject to alterations


Order No

Page

230.
231.
232.
233.
234.
235.1.
2351.1.
236.1.
2361.1.
237.1.
237.8.
238.1.
238.8.
239.1.
239.8.

E 108
E 108
E 16
E 16
E 16
E 112
E 113
E 109
E 110
E 116
E 117
E 118
E 119
E 120
E 121

240.
241.00.1.
241.02.
241.03.
241.14.
241.15.
241.16.
241.17.
241.18.
241.24.
241.25.
241.26.
242.01.
243.7.
2431.7.
244.00.2.
244.1.
244.10.
244.11.
244.12.
244.13.
244.14.
244.15.
244.16.
244.17.
244.20.
244.20.3.
244.25.
244.25.3.
244.32.
244.32.3.
244.4.
244.40.
244.40.3.
244.5.
244.6.
244.7.
244.9.

E 126 - E 128
F 81
F 48, 47
F 49, 47
F 10 - F 38
F 10 - F 39
F 11 - F 36
F 11 - F 37
D 218
F 40, F 42, F 44
F 40, F 42, F 45
F 41 - F 46
F 50
F 82
E 104
D 221
F 54 - F 55
F 74
F 74
F 74
F 74
F 71
F 71
F 77
F 78
F 72, F 79
F 80
F 72, F 79
F 80
F 72, F 79
F 80
F 54, F 55, F 70
F 72, F 79
F 80
F 54, F 55, F 70
F 73
F 73
F 73

2441.11.
2441.12
2441.13.
2441.14.
2441.14.1
2441.15.
2441.15.1
2441.16.
2441.18.
2441.3.
2441.5.
2441.6.
2442.12.
2443.10.
2443.12.
2444.12
2444.13
2445.10.
2445.11.
2450.

D 208 - D 210
D 211
D 212
F 75
F 71
F 75
F 71
F 76
F 76
F 70
F 84
F 84
D 213
D 226
D 227
D 225
D 225
D 214
D 215
F 75, G 15

subject to alterations

Numerical Index
Order No

Page

2451.6.
246.
2461.4.
247.6.
2470.10.
2471.
2471.6.
2472.
2473.
2475.
2477.
2478.
2479.

D 202
F 56 - F 65
F 66 - F 67
F 82
F 88
F 93, F 95
F 83
F 94 - F 97
F 96 - F 97
F 96
F 98
F 99 - F 105
F 89 - F 91
F 123 - F 125

2480.00.10.
2480.00.21.
2480.00.22.
2480.00.23.
2480.00.24.
2480.00.25.
2480.00.26.
2480.00.30.
2480.00.31.
2480.00.32.
2480.00.34.
2480.00.35.
2480.00.39.
2480.00.40
2480.00.45.
2480.00.50.
2480.00.51.
2480.00.54.
2480.00.70.

F 298 - F 299
F 304
F 305 - F 306
F 294 - F 304
F 295 - F 297
F 302 - F 303
F 301 - F 303
F 308 - F 309
F 308 - F314
F 314 - F 315
F 307
F 316 - F 317
F 310 - F 312
F 296
F 313
F 318 - F 319
F 244 - F 254
F 299
F 282 - F 284

2480.004.

2480.005.
2480.006.
2480.007.
2480.008.
2480.009.
2480.010.

2480.011.
2480.015.
2480.018.
2480.019.
2480.022.
2480.044.
2480.045.
2480.047.
2480.051.
2480.052.
2480.053.
2480.055.
2480.057.
2480.058.
2480.064.

F 90, F 91, F 124,

F 125, F 286
F 242 -F 250
F 244 - F 250
F 140 - F 276
F 140 - F 276
F 286
F 69,
F 140 - F 274
F 142 - F 276
F 285
F 287
F 287
F 134 - F 276
F 134 - F 276
F 144 - F 274
F 144 - F 274
F 128 - F 200
F 132 - F 216
F 134 - F 136, F 200
F 134 - F 276
F 140 - F 276
F 210 - F 212, F 224
F 144 - F 276

2480.12./.13.
2480.21.
2480.22.
2480.23.
2480.32.
2480.33.
2480.82.
2481.12./.13.
2482.
2483.12./.13.
2484.12./.13.
2485.12.
2485.31.
2486.12.
2487.12.

F 140 - F 155
F 134 - F 135
F 134 - F 135
F 136 - F 137
F 242 - F 245
F 256
F 252 - F 253
F 158 - F 165
F 128 - F 133
F 258 - F 261
F 264 - F 277
F 220 - F 225
F 246 - F 251
F 228 - F 237
F 176 - F 197

Order No

Page

2487.82.
2489.
2490.12./.13.
2491.
2495.
2496.12.

F 254 - F 255
F 278
F 200 - F 217
F 279
F 280
F 168 - F 173

250.
251.
2511.3.
252.
252.7.
253.
2531.4.
2531.7.
2532.
254.
2541.4.
255.
256.
257.

G 9
G 8
G 12
G 8
F 85
G 10
G 13
F 85
F 86 - F 87
G 10
G 13
G 9
G 11
G 11

260.
2601.
2602.
2605.
2606.
2607.
261.
2611.
2612.
2615.
2616.
2617.
2618.
262.
2621.
2625.
2626.
2627.
263.1.
263.8.
2635.
2636.
2637.
264.1.
264.8.
2645.
2646.
2647.
265.1.
2650.1.
2655.
2656.
2657.

E 75
E 77
E 76
E 72
E 65
E 69
E 75
E 77
E 76
E 72
E 65
E 69
E 84
E 74
E 74
E 73
E 66
E 70
E 122
E 123
E 73
E 66
E 70
E 124
E 125
E 73
E 66
E 70
E 111
E 111
E 73
E 66
E 70

266.
2661.01.
2661.02.
2661.03.
2661.04.
2661.05.
2661.06.
2661.07.
2661.08.
2662.01.
2662.02.
2662.03.
2662.04.
2662.05.
2664.02.
2664.04.
2664.05.
2664.06.
2664.07.

E 21
E 96
E 96
E 100
E 100
E 101
E 101
E 90
E 90
E 97
E 97
E 102
E 102
E 91
E 94
E 94
E 86
E 86
E 87

Order No

Page

2664.08.
2664.09.
2664.10.
2665.
2666.
2667.
267.
268.
269.
270.
2701.
2702.
2703.
2704.
2705.
271.
2711.
2712.
2713.
2714.
2715.
272.
2721.
2722.
2723.
2724.
2725.
273.
2731.
2732.
2733.
2734.
2735.
274.
2741.
2742.
2743.
2744.
2745.
275.
2751.
2752.
2753.
2754.
2755.
276.
277.

E 88
E 88
E 87
E 95
E 89
E 105
E 22
E 23
E 23
E 25
E 56
E 32
E 42
E 36
E 46
E 25
E 56
E 32
E 42
E 36
E 46
E 25
E 57
E 33
E 43
E 37
E 47
E 25
E 57
E 33
E 43
E 37
E 47
E 15
E 57
E 33
E 43
E 37
E 47
E 15
E 57
E 33
E 43
E 37
E 47
E 115
E 115

280.02
280.05
280.08
280.09
280.11
280.15
280.16
280.20
280.23
280.24
280.27
280.34
280.35
280.36
280.131
280.8000
280.8001
280.8020
280.8021
281.01
281.147
281.15
281.243
281.270
281.401
281.454
281.648

H 7
H 7
H 7
H 7, H 9
H 14
H 13
H 13
H 11
H 13
H 9
H 14
H 14
H 14
H 16
H 13
H 14
H 14
H 14
H 14
H 9
H 12
H 9
H 10
H 10
H 12
H 12
H 10

15

Numerical Index
Order No

Page

281.706
2900.
2910.
2920.
2921.
2925.

H 11
A 34, B 4
A 35, B 5
B 6 - B 9
B 6 - B 8
B 10

2960.44.45.
2960.54.45.
2960.70.
2960.71.
2960.72.
2960.73.
2960.74.
2960.75.
2960.76.
2960.79.
2960.80.
2960.81.
2960.85.
2960.86.
2960.87.
2960.88.
2960.89.
2960.90.
2960.91.
2960.92.
2960.93.

D 158 - D 159
D 160
D 141
D 139
D 138
D 172
D 154 - D 155
D 156 - D 157
D 144
D 151
D 152
D 161
D 142
D 143
D 140
D 162
D 173
D 176
D 176
D 177
D 163

2961.70.
2961.71.
2961.73.
2961.74.
2961.75.
2961.76.
2961.77.
2961.78.
2961.79.
2961.79.45.
2961.81.
2961.81.45.
2961.82.

D 127
D 125
D 126
D 128
D 135
D 136
D 137
D 134
D 129
D 132
D 130
D 132
D 131

2962.70.
2962.70.45.
2962.71.
2962.72.
2962.73.
2962.74.
2962.75.
2962.75.45.
2962.76.
2962.77.
2962.78.
2962.78.45.
2962.79.
2962.80.
2962.81.
2962.82.
2962.83.
2962.84.45.
2962.85.
2963.70.
2963.71.
2963.72.
2963.73.
2963.80.
2963.81.
2963.82.
2963.83.
2963.84.
2963.85.

D 178
D 179
D 180
D 181
D 182
D 169
D 164
D 165
D 167
D 168
D 146 - D 147
D 145
D 170
D 171
D 183
D 184
D 185
D 148
D 150
D 190
D 190
D 191
D 191
D 193
D 192
D 188
D 188
D 189
D 189

16

Order No
2964.77.
2964.78.
2965.80.
2965.80.45.
2965.81.
2965.82.
2965.82.45.
2965.83.
2966.72.
2967.10.
2967.11.

Page
D 186
D 186
D 198
D 196
D 194
D 199
D 197
D 195
D 174
D 200
D 201

subject to alterations

FIBRO

2 17489 2002 1

2000.500.008 GB

07/2002

Experience and expertise

you can rely on
FIBRO Quality Assurance

FIBRO
Experience and expertise
you can rely on
FIBRO Quality Assurance

FIBRO is renowned for its quality world-wide. This high quality

is achieved through our dedication and commitment to Quality
Assurance.
FIBRO testing starts on the raw material and continues right
through production to the completed product. The test facilities
themselves are also subject to stringent continuous testing.
Only by setting itself such stringent standards can a company
support its customers long term in safety, cost-effectiveness
and quality.
Tests during production
Precision shape and contour testing equipment is used directly
in production. This ensures early confirmation of the quality of
the product.
The shape testing equipment tests for qualities such as roundness, concentricity, straightness and rectangularity.
FIBRO state of the art technology provides 3D visualisation of
concentricity, coaxiality and cylindricity.
Materials testing - raw materials to specification.
The FIBRO laboratories carry out microscopic investigation of
the raw materials, including enlargement to 2,500 times
natural size.
Spectral analysis determines whether the material is correct in
terms of chemical composition.
Hardening hardness testing
All the process parameters in the hardening process in our own
hardening shop are recorded and documented.
Hardness testing is used to monitor the results of the
hardening process on every batch.

FIBRO GmbH Standard Parts Division

Postfach 1120 D-74851 Hamersheim
Tel: +49 (0) 62 66-73-0* Fax +49 (0) 62 66-73-237
e-mail: info@fibro.de www.fibro.com

2 17490 2002 1

Final tests
For precision at micro level if certain basic requirements have
to be met.
It goes without saying that the temperature of the measuring
room at FIBRO is kept at 20C. Here the fine precision FIBRO
products are measured after production before being released
to the customer.