Prosthodontic Rehabilitation of A Mandibulectomy Patient - A Clinical Report
Prosthodontic Rehabilitation of A Mandibulectomy Patient - A Clinical Report
Prosthodontic Rehabilitation of A Mandibulectomy Patient - A Clinical Report
ISSN 1817-3055
IDOSI Publications, 2014
DOI: 10.5829/idosi.wjms.2014.10.1.82170
Abstract: Prosthetic options to correct mandibulectomy include intermaxillary fixation, removable guide flange
prosthesis, implant supported prosthesis and palatally based guidance restorations. This clinical report
described the mandibular guidance therapy to correct the mandibular deviation due to segmental
mandibulectomy.
Key words: Guiding Flange Segmental Mandibulectomy
INTRODUCTION
Technique:
A preliminary alginate impression was made,
capturing the defect in impression compound
(Y dent impression compound MDM corporation)
and a pick up with alginate (Algimate Dento One Inc.)
(Fig. 4).
A custom tray was fabricated using self cure acrylic
resin (DPI RR Cold Cure Dental products of India)
(Fig. 5).
A secondary impression of the defect was taken
using addition silicone (Aquasil LV hydrophilic
addition reaction silicone Dentsply) after border
moulding the custom tray (Fig. 6).
Temporary removable partial denture fabricated for
the lower arch.
Impression for the flange on the normal side without
encroaching the vestibule was made using
impression compound (Fig. 7).
Fabrication of flange using self cure resin and the
acrylic flange is attached to the RPD (Fig. 8).
78
Fig. 1:
Fig. 6:
Fig. 2:
Fig. 7:
Fig. 3:
Fig. 8:
Fig. 4:
Fig. 9:
Fig. 5:
Fig. 10:
79
Fig. 12:
Fig. 13:
Fig. 14:
REFERENCES
1.
80
2.
3.
4.
5.
6.
7.
8.
81