Power Quality devices for all applications

SICAM T
Digital Measurement Transducer

siemens.com/powerquality

Contents SICAM T
Page

Device description

3/3

Device description, Applications

3/4

Specific functions and design

3/5

Measurands 3/6

Connection types

3/7

Graphical user interface

3/8

Technical data

3/10

Connection diagram, dimension drawings

3/13

Selection and ordering data

3/14

CE conformity and IEC 61850 certificate

3/15

8
3/3 SICAM Power Quality and Measurements Siemens SR 10 Edition 4

Products SICAM T
Device description
Device description
SICAM T is a digital measurement transducer that allows
the measuring of electrical quantities in electrical networks
in a single unit. In industries, power plants and substations,
transducers are especially used for measurand (e.g. current,
voltage, power, phase angle, energy or frequency) assignment
into further processing through analog outputs or communication interface for precise control, notification or visualization tasks.

Input and output circuits

4 inputs for alternating voltage measurements
3 inputs for alternating current measurements up to
10 A continuous
4 optional DC analog outputs freely configurable:
Direct currents: 0 mA to 20 mA, 4 mA to 20 mA and
20mA to 20 mA
Direct voltages: 0 V to 10 V and 10 V to 10 V
Individually programmable binary outputs.
Signalization LEDs
Automatically monitor the functions of its hardware,
software, and firmware components.
Communication
Ethernet: IEC 61850 or Modbus TCP communication
protocol
Optional serial RS485 interface that enables the device to
communicate via the Modbus RTU or the IEC 60870-5-103
communication protocol.
Measurands
The following measurands can be recorded or calculated
from the measured quantities:
TRMS (True RMS) for alternating voltage and current
Active, reactive and apparent power
Active, reactive and apparent energy
Power frequency
Phase angle
Power factor and active power factor
Voltage and current unbalance
Mean value of the 3-phase voltages: Vavg
Mean value of the 3-phase currents: Iavg.
Time synchronization
For a common time basis when communicating with
peripheral devices and time stamping of the process data.
External time synchronization via Ethernet NTP
External time synchronization via field bus using the Modbus
RTU or the IEC 60870-5-103 communication protocol
Internal time synchronization via RTC (if external time
synchronization is not available).

SR10-001.tif

Device type
Top-hat rail mounted device
Plastic case 96 mm 96 mm 100 mm/
3.78 in. x 3.78 in. x 3.94 in. (W H D)
Degree of protection IP20.

2
Fig. 3/1 SICAM T digital measurement transducer

Response time for analog and binary outputs

The faster response time of the analog and binary output is
a very important feature of SICAM T that enables a reliable
reaction of the controlling applications. The response time of
the device is 120 ms at 50 Hz and 100 ms at 60 Hz.
Applications
Conversion and integration of measurands into substation
automation, protection or SCADA process via RTU and/or via
protocols IEC 61850 (for 7KG9662 variant), Modbus TCP,
IEC 60870-5-103 for further control and/or monitoring
tasks
Monitoring of lower voltage levels and heavy load control,
e.g. air conditioning and motors
Depending on the device type, the input circuits for
voltage measurement are either designed as voltage
dividers or they are galvanically isolated. Devices with
galvanic isolation can be used without voltage transformers in the power systems IT, TT and TN. Devices with a
voltage divider can also be used in these power systems;
for IT power systems, however, an upstream voltage
transformer is required.
Main features
Design: Compact and robust for flexible application in
industrial and utility environments
Connections in 1-phase systems, in 3-wire and 4-wire
systems
Applications: Flexible for power utilities, industrial and
commercial sector applications
Measurements: up to 60 measured or calculated values
available
Temperature range: 25 C to +55 C/13 F to 131 F
Uncertainty: typically 0.1 % for voltage and current at
rated input IEC 60688, and 0.2 s acc. to IEC 62053-21
High EMC immunity: according to standards EN 61000-6-2
and EN 61000-6-4 for the EMC directives, and with the
standard EN 61010-1 for the low-voltage directive
UL Certfication: This product is UL-certified to standard
UL 61010-1.

SICAM Power Quality and Measurements Siemens SR 10 Edition 3 3/3

Products SICAM T
Device description, Applications

Highlights
Flexible current measurement range (up to 2 In)
4 fast analog outputs (reaction approx. 120 ms at 50 Hz
and 100 ms at 60 Hz) for reliable control
2 individual binary outputs for fast switching, indications
(e.g., limit violation) and operation status monitoring
4 LEDs for local status visualization
Ethernet communications via IEC 61850 and Modbus TCP
and serial interface via Modbus RTU or IEC 60870-5-103
Internal battery for real time clock and saving of energy
counter values in case of a power outage
User-friendly operation through web server (no extra
software for parameterization needed, no converters and
extra cables)

Field level

Real time clock (RTC), field bus synchronization or network

synchronization possible via NTP.
Applications
SICAM T applications: Local monitoring or control purposes
through assignment of up to 60 available electrical parameters to analog outputs, notifications through binary outputs
or integration into SCADA/monitoring systems through
communication interface, e.g. serial or Ethernet (Fig. 2/58;
Table 2/26).

1. RTU
2. 4 analog outputs
3. 4 analog outputs
4. Binary outputs

V, I

Control center
V, I

V, I

V, I

Alarms, measurements
and indications
Ethernet/
MODBUS TCP or IEC 61850

Field device level

1

SENT T-0017.EN.ai

Serial: MODBUS RTU or IEC 60870-5-103 (optional)

Parameterization/
value display

Fig. 3/2 SICAM T applications

Application area

Generation
substation

Transmission
substation
Transformer
substation

Transformer
distribution

Process

Generator

Voltage

Current

Power

Frequency

Phase
angle

Energy

Alarm

Incoming line

Outgoing line

Incoming line

Bus

Feeder

Incoming line

Bus

Feeder

SCADA/EMS/DMS

Energy
management

Motors

Commercial
(e.g. air conditioning)

Table 3/1 Selection and ordering data

3/3 SICAM Power Quality and Measurements Siemens SR 10 Edition 4

Internal
cost
allocation

Products SICAM T
Specific functions and design
Specific functions and design
Measurement process and connections
The measurements are obtained from the alternating
quantities of current and voltage supplied to the different
measuring inputs. Rated input alternating voltages up to
Vph-N = 400 V and Vph-ph = 690 V can be fed in using internal
resistive input voltage dividers.
The internal current transformers process rated input
alternating currents up to 5 A. The circuits connected on the
input side are isolated galvanically from the current transformers to ensure that the potential is decoupled. The input
values are processed and then output as analog values or
digital data by the corresponding interfaces, converted into
direct currents and/or direct voltages depending on the
parameter settings, or transmitted to peripheral devices for
analysis.
Response time for analog outputs
The faster response time of the analog and binary output
is a very important feature of SICAM T that enables a reliable
reaction of the controlling applications. The response time of
the device is 120 ms at 50 Hz and 100 ms at 60 Hz.

Internal time synchronization via RTC with quartz oscillator (if external time synchronization is not available).
Electrical assembly
SICAM T 7KG966 contains the following electrical modules
depending on the device version:
Digital signal processor (DSP)
4 inputs for AC voltage measurements
3 inputs for AC current measurements
4 DC analog outputs (optional)
2 binary outputs
Supply voltage
Serial RS485 interface (option for 7KG9661)
Ethernet interface (standard).

4 x voltage
terminal

Terminal
block F

Current:
0 mA to 20 mA
4 mA to 20 mA and
20 mA to 20 mA

Time

Terminal
block K

Voltage:
0 V to 10 V and
10 V to 10 V

3 x current
terminals

2 x binary outputs

1 A AC
5 A AC

Terminal
block G

230 V AV or
250 V DC

Input
Terminal
block H

4 x analog outputs

4 x LEDs

Max. 690 V AC
(phase-phase)
Max. 400 V AC
(phase-neutral)

Terminal
block E

Power supply
24250 V DC
100230 V AC

IP addr button

RS 485 Serial
MODBUS RTU / IEC
60870-5-103

Terminal
block J

Ethernet
IEC 61850 or
MODBUS TCP

Terminal
block Z

Measuring
cycle

SICAM T-0018.EN.ai

X ms

60 ms

Output

Fig. 3/4 Block diagram SICAM T 7KG9661

Time

SICAM T-0005.EN.ai

Response time
X + 60 ms
Worst case: X = 60 ms
60 ms + 60 ms = 120 ms

Fig. 3/3 Response time diagram

Communication
To communicate with the systems control and other process
automation equipment, the device features an Ethernet
interface, and if installed in the device model, an RS485
interface. Ethernet supports the device parameterization, the
transmission of measured data, metered values and indications
and the time synchronization via NTP. The communication
protocols are HTTP, IEC 61850 (7KG9662) and Modbus TCP.
The RS485 interface supports the transmission of the measured data, metered values and indications, and the time
synchronization. Depending on the device version, either
the Modbus RTU or the IEC 60870-5-103 communication
protocol can be used.
Time synchronization
The following types of time synchronization can be executed:
External time synchronization via Ethernet NTP (preferred)
External time synchronization via field bus using the
Modbus RTU or the IEC 60870-5-103 communication
protocol

Mechanical design
The electrical modules are installed in a plastic case
with the dimensions 96 mm 96 mm 100 mm/
3.78 in. x 3.78 in. x 3.94 in. (W H D). The case is
prepared for mounting on a top-hat rail.
The top side of the device accommodates the RJ45 Ethernet
connector with two LEDs and four additional LEDs.

A
L1

B
L2

C
L3

N/L/+

1
2
3
4
5
6
7
8
9

6,&$07
SICAM T-0008.ai

Binary
outputs
RS485
interface
DC analog
outputs
Inputs for
AC voltage
measurement
Supply
voltage
Inputs for
AC current
measurement

Fig. 3/5 Connectors on the device

SICAM Power Quality and Measurements Siemens SR 10 Edition 3 3/5

Products SICAM T
Measurands
Measurand

AC voltage

Circuit

Va

a-N

Vb

b-N

Vc
Vab, Vbc, Vca

a, b, c
a, b, c
a-b, b-c, c-a

Vph/3

Vph/3

a-N

Vph/3

IN

a, b, c

Iavg

a, b, c

Iph/3

Iunbal

a, b, c

cos (a)

PFa

Sa

WPdemand

Reactive energy
capacitive

WQa capacitive

WQb inductive, WQc inductive

WQinductive
WQb capacitive, WQc capacitive
WQcapacitive
WSa
WSb, WSc
WS

b, c

a, b, c

a, b, c

Table 3/2 Measurands according to the connection type: Power measurands in power systems
3/3 SICAM Power Quality and Measurements Siemens SR 10 Edition 4

b, c
a, b, c

b, c
a, b, c
a

b, c

b, c

b, c
a, b, c
a

a, b, c
a

b, c
a, b, c

b, c
a, b, c

WQa inductive

Reactive energy
inductive

Pa

WPb demand, WPc demand

b, c

Active power

WPa demand

WPb supply, WPc supply

a, b, c

WPsupply

b, c

WPa supply

a, b, c

a, b, c

Q b, Q c

b, c

PF

Qa

Apparent energy

Vph/3

S b, S c

b, c

Frequency

Active energy
demand

P b, P c

a, b, c

Active energy
supply

b, c

Apparent power

unbalanced
(3I)

Reactive power

balanced
(1I)

PFb, PFc

unbalanced
(2I)

cos

Phase angle

unbalanced
(3I)

Ia

cos (b), cos (c)

Power factor

balanced
(1I)

4-wire network (star)

c-N

Vavg

I b, I c

Active power factor

3-wire network (delta)

a-b, b-c, c-a

VN
Vunbal
AC current

1-phase
system

Products SICAM T
Connection types
Connection types
SICAM T 7KG9661 supports the following connection types:
1-phase system
3-wire network (balanced)
3-wire network (unbalanced), 2 current inputs

Current

Voltage

B
IL2

C
IL3

A
L1

B
L2

Current

C
L3

PE
S1

A
IL1

P1

Voltage

B
IL2

C
IL3

A
L1

PE

S2

L1(a)
N

4-wire network, 1 voltage transformer and

1 current transformer, balanced

1-phase system, no voltage transformer

A
IL1

3-wire network (unbalanced), 3 current inputs

4-wire network (balanced)
4-wire network (unbalanced).

S1

P2

S2

B
L2

C
L3

L1(a)
SICAM T-0009.EN.ai

P1

P2

L2(b)
L3(c)
N

SICAM T-0013.EN.ai

3-wire network, 2 voltage transformers and

1 current transformer, balanced*

4-wire network, no voltage transformer and

3 current transformers, unbalanced

Current
A
IL1

Voltage

B
IL2

C
IL3

A
L1

B
L2

PE
S1

S2

Current

C
L3

A
IL1

Voltage

B
IL2

C
IL3

A
L1

B
L2

C
L3

S1

S2 S1

S2 S1

S2

L1(a)
P1

P2

L2(b)

P1

P2

L2(b)

L3(c)
SICAM T-0010.EN.ai

P1

L3(c)
N

P2
P1

P2
SICAM T-0014.EN.ai

3-wire network, 2 voltage transformers and

3 current transformers, unbalanced*
Voltage

B
IL2

C
IL3

A
L1
a

PE
S1

S2 S1

S2 S1

S2

B
L2

Current

C
L3

A
IL1

P2

C
IL3

PE
S1

P1

Voltage

B
IL2

L1(a)
P1

S2 S1

S2 S1

S2

A
L1

B
L2

C
L3

L1(a)

P2
P1

P2

4-wire network, 3 voltage transformers and

3 current transformers, unbalanced

Current
A
IL1

L3(c)

PE

L1(a)

L2(b)

P1

SICAM T-0012.EN.ai

L2(b)
L3(c)
N

P2
P1

P2
P1

P2
SICAM T-0015.EN.ai

* Important: The maximum secondary voltage for this connection example is 480 V AC.
The maximum allowable voltage between phase and ground must not be exceeded.
For IT network connection, please read carefully the devices manual for detailed description.
Fig. 3/6 Connection types
SICAM Power Quality and Measurements Siemens SR 10 Edition 3 3/7

Products SICAM T
Graphical user interface
Graphical user interface

Parameterization and monitoring

software
The device is configured from a
connected PC or notebook only.
The user interface SICAM T GUI
(GUI = Graphical User Interface) is
implemented in the device, meaning
that for the whole operation and
parameterization of the device no
additional software is required. It is
possible to navigate through the
Microsoft Internet Explorer using the
icons on the toolbar.
Device status, such as communication,
parameterization, log files, value
view and maintenance, can be easily
processed through SICAM T GUI
interface.

SR10-004.tif

4
Online help
Address bar
Tab
Menu bar
Microsoft Internet Explorer
Toolbar

Navigation bar
Status bar
Input/output window
Navigation window
Element
Menu

Fig. 3/7 Layout of the SICAM T GUI user interface

Information
The navigation window of the
Information tab contains the device
information, as well as operative and
device logs. It offers the complete
overview of the device status.

SR10-005.tif

8
Fig. 3/8 Information tab, shows device information input/output window

3/3 SICAM Power Quality and Measurements Siemens SR 10 Edition 4

Products SICAM T
Graphical user interface
Configuration
The configuration mode allows to set
the device parameters. It is possible to
tailor the process connections to the
installation environment, specify the
limits of the measuring ranges,
parameterize the communication, and
make various operational settings.

Analog outputs
The following types of characteristics
are used for the transmission of
measured values to the DC analog
outputs:
Linear, Zoom, Live-Zero, Knee point,
Knee-point Zoom, Bipolar Linear,
Bipolar Knee-point Zoom, Square
Transfer Characteristic (U^2).
SR10-006.tif

Fig. 3/9 DC analog outputs input/output window

Value View
The measured values are displayed in
the Value View tab.
AC operational values
AC power and energy
DC analog outputs
Binary outputs
Measurand limits.
Depending on which operational
parameters are selected, the input/
output window displays the measured
values of the measurands with the
corresponding unit or indications in a
tabular list that is updated every 5 s.

SR10-007.tif

Fig. 3/10 Value View tab

Maintenance
The Maintenance tab allows to
update the firmware, perform
calibration, make various presettings,
view and delete logs, and analyze
protocol-specific communication data.

SR10-008.tif

Fig. 3/11 Maintenance tab

SICAM Power Quality and Measurements Siemens SR 10 Edition 3 3/9

Products SICAM T
Technical data
Electrical data/inputs

Inputs for alternating voltage measurements

Inputs for alternating current measurements

Rated input voltage

(selectable via parameter)

Rated input current ranges

(selectable via parameter)

1 A, 5 A

Max. input current

2 rated input current

Max. rated input voltage

150 V

Power consumption per input

at 1 A AC
at 5 A AC

1 mVA
2.5 mVA

Permissible power frequency

45 Hz to 65 Hz

Measuring error (with calibration)

at 23C 1C; 50 Hz or 60 Hz:

typically 0.2% at rated

input current

Thermal stability

10 A continuous
100 A for max. 1 s
according to IEC 60688

ph-N: 63.5 V AC, ph-ph: 110 V AC

ph-N: 110 V AC, ph-ph: 190 V AC
ph-N: 230 V AC, ph-ph: 400 V AC
ph-N: 400 V AC (max. 347 V at UL)
ph-ph: 690 V AC (max. 600 V at UL)

Max. input voltage

1.2 rated input voltage

Max. supply voltage

phase-N/PE
phase-phase

480 V
831 V

Power consumption per input for

Urated 400 V AC

38 mW

Permissible power frequency

45 Hz to 65 Hz

Input impedances



7,9 M
3,9 M
7,9 M

a, b, c to N
a, b, c, N to PE
a-b, b-c, c-a

Measuring error (with calibration)

at 23C 1C; 50 Hz or 60 Hz

typically 0.2% at rated

input voltage

Continuous overload capacity

1.5 rated input voltage (600 V)

Surge overload capacity

2 rated input voltage (800 V)

according to IEC 60255-27

Electrical data/outputs
DC analog outputs

Binary outputs

Use as current outputs (direct current)

230 V
250 V

20 mA

Maximum output current

24 mA

Maximum load impedance

(incl. line impedance)

< 400

Maximum continuous contact

current

100 mA

Short-circuit current
(short-circuit proof)

24 mA

Maximum pulse current for 0.1 s

300 mA

No-load voltage (idling-proof)

Internal impedance

35

15 V

Admissible switching frequency

10 Hz

Measuring error (with calibration)

at 23C 1C

max. 0.1% at rated current

Number of switching cycles

unlimited

Response time

120 ms (50 Hz), 100 ms (60 Hz)

DC analog outputs
Use as voltage outputs (direct voltage)

Maximum switching voltage

Alternating voltage
Direct voltage

Rated output current

Rated output voltage

10 V

Maximum output voltage

12 V

Minimum load impedance

1 k

Short-circuit current
(short-circuit proof)

24 mA

Measuring error (with calibration)

at 23C 1C

max. 0.1% at rated voltage

Response time

120 ms (50 Hz), 100 ms (60 Hz)

Table 3/3 Technical data

8
3/3 SICAM Power Quality and Measurements Siemens SR 10 Edition 4

Products SICAM T
Technical data
Tolerance limits
Measurands

Voltage Vph-ph (delta)

acc. to parameterization

Voltage Vph-N (star)

acc. to parameterization

Unit

Rated
Value

Operat. measurem.
uncertainty
acc. to
IEC 61557-12

acc. to
IEC 606881

AC 110 V
AC 190 V
AC 400 V
AC 690 V
(max.
600 V AC
for UL)

0.2%

0.1%

AC 63.5 V
AC 110 V
AC 230 V
AC 400 V
(max.
347 V AC
for UL)

0.2%

Measurands

0.1%

Unit

Rated
Value

Operat. measurem.
uncertainty
acc. to
IEC 61557-12

acc. to
IEC 606881

0.5%

0.2%

Reactive power Q
+ inductive, capacitive

var

Apparent power S

VA

0.5%

0.2%

Power factor PF2

1.0%

0.5%

Active power factor

cos 2

1.0%

0.5%

Phase angle 2

Degree

Frequency f

Hz

50 Hz,
60 Hz

10 mHz
10 mHz
(from 30% to (from 30% to
120% Urated) 120% Urated)

Active energy WP_demand

Wh

0.5%

0.5%

Wh

0.5%

0.5%

Voltage unbalanced
Vunbal

0.15%

0.15%

Active energy WP_supply

0.5%

0.5%

AC 1 A
AC 5 A

0,2%

0.1%

Reactive energy
WQ_inductive

varh

Current I
acc. to parameterization

0.5%

0.5%

0.5%

0.15%

Reactive energy
WQ_capacitive

varh

Current unbalanced
Iunbal

Apparent energy WS

VAh

0.5%

0.5%

Active power P
+ demand, supply

0.5%
0.2 s acc. to
IEC 62053-21

0.2%

 t reference conditions are applicable from 0.1 to 1.2 x nominal range.

A
Measurements from 2% of the rated apparent power value onwards
in the selected measuring range.
3
Valid for operating temperature.

General electrical data and reference conditions

Degree of protection according to IEC 60529

Supply voltage
Rated input voltages

110 V AC to 230 V AC or
24 V DC to 250 V DC

Device front

IP20

Device rear (connections)

IP20

System frequency at AC

45 Hz to 65 Hz

Admissible input voltage tolerance

(valid for all input voltages)

20%

Reference conditions for determining the test data

(precision specifications under reference conditions)

Permitted ripple of the input voltage

at 24 V DC, 48 V DC, 60 V DC,
110 V DC, 220 V DC, 250 V DC

15%

Rated input current

1%

Rated input voltage

1%

Permitted harmonics at 115 V, 230 V

2 kHz

Frequency

45 Hz to 65 Hz

Curve shape sine, total harmonic

distortion

5%

Ambient temperature

23C 1C

Supply voltage

UHN 1%

Warm-up time

15 min

Interfering fields

none

Max. inrush current

at 110 V DC; 115 V AC
at 220 V DC to 300 V DC; 230 V AC
Maximum power consumption

< 15 A
22 A (after 250 s: <5 A)
6 W/9 VA

Battery
Type

CR2032

Voltage

3V

Capacity

230 mAh

Table 3/4 Technical data

8
SICAM Power Quality and Measurements Siemens SR 10 Edition 3 3/11

Products SICAM T
Technical data
Communication data

Environmental data

Ethernet

Supply voltage

Bus protocol

IEC 61850 Server or

Modbus TCP

Transmission rate

10/100 MBit/s

Communication protocol

IEEE 802.3

Connection

100Base-T (RJ45)

Cable for 100Base-T

100 to 150 STP, CAT5

Maximum cable length 100Base-T

100 m (if well installed)

Voltage strength

DC 700 V

Serial RS485 interface

Connection
Bus protocol Modbus RTU

Temperature
during transportation
during storage

25C to +55C /
13 F to 131 F
25C to +70C /
13 F to 158 F
25C to +70C /
13 F to 158 F

Maximum temperature gradient

20 K/h

Air humidity
mean relative air humidity per year
maximum relative air humidity

75%
95% 30 days a year

Condensation
during operation
during transportation and storage

not permitted
permitted

Baud rate

9600 Bit/s, 19.200 Bit/s,

38.400 Bit/s, 57.600 Bit/s

Parity

even, even (fixed), odd,

no (1 or 2 stop bits)

Protocol

half-duplex

Climate

Max. cable length, depending on data rate

1,000 m

Cold

Transmission level

low: 5 V to 1.5 V
high: +5 V to +1.5 V

IEC 60688-2-1 Test Ad

IEEE C37.90

Reception level

low: 0.2 V
high: +0.2 V

Dry heat during operation, storage,

and transportation

IEC 60688-2-2 Test Bd

IEEE C37.90

Damp heat

Bus termination

not integrated, bus

termination using plugs
with integrated bus
terminating resistors

DIN EN 60688-2-78:2002-09
IEEE C37.90

Damp heat cyclic

IEC 60688-2-30 Test Db

Change of temperature

IEC 60688-2-14 Tests Na and Nb

Individual gas test, industrial

atmosphere, sequential gas test

IEC 60688-2-42 Test Kc

IEC 60688-2-43

Flowing mixed gas

IEC 60688-2-60 Method 4

Salt fog test

IEC 60688-2-11 Test Ka

Bus protocol IEC 60870-5-103

Baud rate

9-pin D-sub plug connector

Operating temperature
continuous operation

9600 Bit/s, 19.200 Bit/s,

38.400 Bit/s

Max. cable length, depending on data rate

1,000 m

Transmission level

low: 5 V to 1.5 V
high: +5 V to +1.5 V

Reception level

low: 0.2 V
high: +0.2 V

Bus termination

not integrated, bus

termination using plugs
with integrated bus
terminating resistors

Table 3/5 Technical data

8
3/3 SICAM Power Quality and Measurements Siemens SR 10 Edition 4

Regulations and standards

Mechanics
Vibration during operation

IEC 60688-2-6 Test Fc

IEC 60255-21-1

Products SICAM T
Connection diagram, dimension drawings
Connection diagram/dimension drawings

E Current

A01

A IL1

2
3

A02

4
5

A03

6
7

A04

8
9

B IL2
C IL3

F
A L1 Voltage
B L2

B0

CL3

B1
B2

N
Serial
interface
RS
485

H Power supply

SENT T-0019.EN.ai

L/+

L/

Ethernet
interface

9-pole

Fig. 3/12 Connection diagram

96 / 3.78

Guiding of the
snap-in clip

A
L1

96 / 3.78

1
2
3
4
5
6
7
8
9

B
L2

C
L3

113.3 / 4.46
103.8 / 4.09

6
Top-hat rail

N/L/+

SICAM T

Snap-in clip

SENT T-0020.EN.ai

Dimensions in mm / in.

Release device

Pulling direction

Fig. 3/13 Dimension drawings

8
SICAM Power Quality and Measurements Siemens SR 10 Edition 3 3/13

Products SICAM T
Selection and ordering data
Description

Order No.

Multifunctional transducer

SICAM T

Input circuits
Resistive divider
Galvanic isolated voltage transformer

0-1AA0

1
2

I/O board or I/O module

Without
4 analog outputs (20_0_20 mA/10 V_0_10 V)

7KG9661 -

Type
Snap-on mounting unit
Dimensions 96 mm x 96 mm x 100 mm / 3.78 in. x 3.78 in. x 3.94 in. (W x H x D)
2 binary outputs
IP20
web server
UL Certification
Measurements: V, I, f, P, Q, S, cos , energy
Modbus TCP

A
F

Serial interface and communication protocol

Without
RS485 Modbus RTU
RS485 Modbus RTU and IEC 60870-5-103

Description

0
1
3

Order No.

Multifunctional transducer

SICAM T IEC 61850

Input circuits
Resistive divider
Galvanic isolated voltage transformer

I/O board or I/O module

Without
4 analog outputs (20_0_20 mA/10 V_0_10 V)

Ethernet patch cable for parameterization

With double shield (SFTP), cross-over connection, LAN connector at both ends,
SICAM T <> PC; length: 3 m/9.84 in.

A00-2AA0

7KG9662 -

Type
Snap-on mounting unit
Dimensions 96 mm x 96 mm x 100 mm/3.78 in. x 3.78 in. x 3.94 in. (W x H x D)
2 binary outputs
IP20
web server
UL Certification
Measurements: V, I, f, P, Q, S, cos , energy
IEC 61850

Table 3/6 Selection and ordering data

8
3/3 SICAM Power Quality and Measurements Siemens SR 10 Edition 4

1
2
A
F

7KE6000-8GE00-3AA0

Products SICAM T
CE, UL, IEC 61850 and IEC 60870-5-103 conformity certificate
CE conformity
This product complies with the directive of
the Council of the European Communities on
the approximation of the laws of the Member
States relating to electromagnetic compatibility (EMC Council Directive 2004/108/EC)
and concerning electrical equipment for use within specified
voltage limits (Low-voltage Directive 2006/95/EC).
This conformity has been established by means of tests
conducted by Siemens AG according to the Council Directive
in agreement with the generic standards EN 61000-6-2 and
EN 61000-6-4 for the EMC directives, and with the standard
EN 61010-1 for the low-voltage directive.
The device has been designed and produced for industrial use.
The product conforms to the standard EN 60688.

This product is UL-certified to Standard UL 61010-1, based on

the specification stated in chapter 3.103.12 (Technical
Data).
UL File No.: E228586.

Open-type Measuring Equipment

2UD1

8
SICAM Power Quality and Measurements Siemens SR 10 Edition 3 3/15

Products SICAM T

8
3/3 SICAM Power Quality and Measurements Siemens SR 10 Edition 4