Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
431 views

AM Process Chain

The AM process involves 8 main steps: 1) CAD model creation, 2) conversion to STL file format, 3) transfer of STL file to the AM machine, 4) machine setup, 5) building the part in layers, 6) part removal once complete, 7) post-processing such as support structure removal, and 8) applying the part for its intended use which may require further finishing steps.

Uploaded by

Shubham
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
431 views

AM Process Chain

The AM process involves 8 main steps: 1) CAD model creation, 2) conversion to STL file format, 3) transfer of STL file to the AM machine, 4) machine setup, 5) building the part in layers, 6) part removal once complete, 7) post-processing such as support structure removal, and 8) applying the part for its intended use which may require further finishing steps.

Uploaded by

Shubham
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 21

AM PROCESS

CHAIN

AM PROCESS CHAIN

Step 4: Machine Setup


The AM machine must be properly set up prior to the build process. Such settings
would relate to the build parameters like the material constraints, energy source,
layer thickness, timings, etc.
Step 5: Build
Building the part is mainly an automated process and the machine can
largely carryon without supervision. Only superficial monitoring of the
machine needs to take place at this time to ensure no errors have taken
place like running out of material, power or software glitches, etc.

Step 6: Removal
Once the AM machine has completed the build, the parts must be removed.
This may require interaction with the machine, which may have safety
interlocks to ensure for example that the operating temperatures are
sufficiently low or that there are no actively moving parts.

Step 7: Post processing


Once removed from the machine, parts may require an amount of additional
cleaning up before they are ready for use. Parts may be weak at this stage
or they may have supporting features that must be removed. This therefore
often requires time and careful, experienced manual manipulation.

Step 8: Application
Parts may now be ready to be used. However, they may also require
additional treatment before they are acceptable for use. For example, they
may require priming and painting to give an acceptable surface texture and
finish. Treatments may be laborious and lengthy if the finishing
requirements are very demanding

Step 1: CAD

All AM parts must start from a software model that fully describes the external
geometry. This can involve the use of almost any professional CAD solid modeling
software, but the output must be a 3D solid or surface representation.
Reverse engineering equipment (e.g., laser scanning) can also be used to create this
representation.

Create a required
component 3D
model by using
the 3D modeling
tools like Pro-e,
UG, Catia etc.

Step 2: Conversion to STL


Nearly every AM machine accepts the STL file format, which has become a de
facto standard, and nearly every CAD system can output such a file format. This file
describes the external closed surfaces of the original CAD model and forms the
basis for calculation of the slices.

Data Validation and Repair

The exported data is an approximation of the precise internal 3D


model.

During this approximation process the model surfaces are


represented with simple geometrical entities in the form of triangles.

STL models created in this way can contain undesirable geometrical


errors such as holes and overlapping areas along surface
boundaries. Therefore, the generated files have to be validated
before being further processed.

Inverted Normal

Bad edges
Missing Triangle

Data Validation and Repair


Analogy

Sliced plane

Top view

Scan vectors
Fig: An invalid
tessellated model

Fig: Invalid model


being sliced

Fig: A layer being scanned

Step 3: Transfer to AM Machine and STL File Manipulation


The STL file describing the part must be transferred to the AM machine.
There may be some general manipulation of the file so that it is the correct
size, position, and orientation for building.

Effect of layer thickness

Smaller layer thickness


Surface finish is good

Larger layer thickness


Surface finish is bad

Building time is more

Building time is less

Data Validation and Repair

Some RP packages like magics offer facilities for model repair,


automatic and/or manual.

These packages include software tools that evaluate the STL models
and determine whether any triangles are missing. In case of errors,
the gaps in the models are filled with new triangles

Part Orientation and Scaling

AM systems build parts along the Z axis of their STL models. Through
reorientation of the parts relative to the model coordinate systems, their
accuracy, surface finish and build time can be optimised.

Fig: Orientation of part in build platform

Part Orientation and Scaling.

Effect of layer thickness

Smaller layer thickness


Surface finish is good
Building time is more

Larger layer thickness


Surface finish is bad
Building time is less

Some RP systems allow several parts to be nested in the system


chamber in order to be built simultaneously.

Fig: 461 units of dental crowns built in 22h 20min

Part Orientation and Scaling.

The parts can be scaled to compensate for anticipated anomalies that might
be introduced by downstream processes such as deformation, shrinkage,
warpage and curling.

Scaled up

Support Structures Generation.

Liquid-based RP processes require support structures to build


overhanging areas of the parts.

These structures are usually generated automatically employing


specialised software tools.

The areas requiring support structures can be minimised by


appropriately selecting the part build direction.

Fig: Parts built with supports

Support Structures Generation.

Setting-up of Process Parameters.

Process-related parameters are entered to specify the build style and


desired system attributes.

These parameters can be adjusted based on part requirements and the


RP material being used.

2D Slice Data Generation.

The STL file is sliced to produce successive crosssectional layers.

In each cross section, polylines are used to approximate the exterior


and interior boundaries of the RP models.

These polyline boundaries can be offset by a particular value to


compensate for process errors.

The slice data can be generated off-line for the entire model or on-line,
one cross-section at a time during part building.

STL files slicing

Contour curves acquiring

Build
Building the part is mainly an automated process and the machine can largely
carryon without supervision. Only superficial monitoring of the machine needs to
take place at this time to ensure no errors have taken place like running out of
material, power or software glitches, etc.

Removal

Once the AM machine has completed the build, the parts must be removed.

This may require interaction with the machine, which may have safety
interlocks to ensure for example that the operating temperatures are
sufficiently low or that there are no actively moving parts.

Post processing

Once removed from the machine, parts may require an amount of additional
cleaning up before they are ready for use.

Parts may be weak at this stage or they may have supporting features that
must be removed.

Application

Parts may now be ready to be used. However, they may also require
additional treatment before they are acceptable for use.

For example, they may require priming and painting to give an acceptable
surface texture and finish. Treatments may be laborious and lengthy if the
finishing requirements are very demanding

Surface Texture Improvements

The type of post-processing utilized for surface texture improvements is

dependent upon the desired surface finish outcome.

If a matte surface finish is desired, a simple bead blasting of the surface


can help even the surface texture, remove sharp corners from stairstepping and give an overall matte appearance.

Fig: Bead blasting

Fig: Manual polishing of Air turbine part

If a smooth or polished finish is desired, then wet or dry sanding and


hand-polishing are performed.

Surface Texture Improvements


In many cases, it is desirable to paint the surface (e.g., with
cyanoacrylate, or a sealant) prior to sanding or polishing.

Painting the surface has the dual benefit of sealing porosity and, by
viscous forces, smoothing the stair-step effect; thus making sanding and
polishing easier and more effective.

You might also like