Professional Documents
Culture Documents
One Year Limited Warranty Information: Model Ip27
One Year Limited Warranty Information: Model Ip27
IP27BR IB
Oct 6, 2008
size: 178 x 178 (13 pcs)
color: Black
Model iP27
The Portable System
For Your iPhone & iPod
iP27-100608-C
Printed in China
3G chart- updated
IP27BR IB
Oct 6, 2008
size: 178 x 178 (13 pcs)
color: Black
Model iP27
The Portable System
For Your iPhone & iPod
iP27-100608-C
Printed in China
IP27BR IB
Table of Contents
Solucionando problemas
Sntoma
El iPhone/iPod no
carga
Causa
Solucin
Baje el volumen
Quick Start.................................................................................................................................................................... 1
Controls and Indicators / iP27 Display .................................................................................................................... 2
Maintenance
Maintenance
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should
be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner
or similar materials can damage the surface of the unit.
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits
provide reasonable protection against radio and TV interference in a residential area.
However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate
interference you can try one or more of the following corrective measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the radio or TV.
Use outlets on different electrical circuits for the equipment and the radio or TV.
Consult your dealer or an experienced radio/television technician if the problem still exists.
Modifying or tampering with your systems internal components can cause a malfunction and might invalidate the
systems warranty and void your FCC authorization to operate it.
11
IP27BR IB
Solucionando problemas
1: AC power
2: batteries
La unidad no
funciona (no circula
corriente elctrica)
3: inserts
Causa
Solucin
El tomacorriente no funciona
RESET
E
R SET
TEST
E
T ST
El iPod no encastra
correctamente
iPhone 3G
insert 15
touch 2G
insert 16
nano 4G
insert 17
3G iPhone
iPod touch
nano 4G
4: iPhone/iPod
El cono de batera
baja est destellando
El iPod no se
comunica con la
unidad
Su software es obsoleto
El iPod no responde
10
IP27BR IB
Troubleshooting
Symptom
iPhone/iPod didnt
charge
Sound is distorted
Possible Problem
Remove your iPhone or iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPhone or iPod. Then replace it in the dock.
Remote Control
didnt work
Universal Dock
Solution
Battery weak
time set
minute
sleep
hour
hour
minute
sleep
time set
EXB Button
OFF
alm. reset
iPod
snooze/dimmer
OFF
snooze
iPod Play/Pause
Power ON Button
Snooze/Dimmer Button
Volume Up Button
DST Switch
Back of Unit
/off/remote
lock
line in
Line in Jack
DC Jack
Travel Lock/Remote Switch
iP27 Display
DST Indicator
Time/Alarm Display
PM Indicator
EXB Indicator
Alarm Armed
iPod Indicator
Main Battery Low Indicator
Sleep Display
IP27BR IB
Troubleshooting
Symptom
a) For home operation and to charge your iPhone or iPod, plug the AC adaptor cable into the AC Adaptor Jack and the other end
into a standard 120VAC wall socket. Adaptor must be plugged in to charge iPhone/iPod.
b) For portable operation, install 4 AA (LR6) batteries, 2 in each compartment on the bottom of the unit. Make sure polarity matches
diagram in compartments.
iPhone/iPod
does not dock
properly
Possible Problem
Solution
Plug another device into the same outlet to confirm the outlet
is working. Make sure any associated power switch is ON
Make sure the dock insert is the one for for your iPhone/iPod
d) Press the Minute Button to adjust the minute setting. When the correct time is displayed, press the Time Set Button again. Two
beeps will indicate clock setting is complete.
iPhone/iPod is locked up
Buttons/Controls
dont work
iPhone/iPod
iPhone/iPod does
not respond to the
unit
IP27BR IB
Press the Sleep Button while the iPhone/iPod is playing to enter sleep mode, and continue to press to step through the
available sleep times: 90, 60, 30 or 15 minutes. The
will appear on the display. The iP27 will play for the number of
minutes set, growing gradually softer until shutting off both the unit and the iPhone/iPod at the set time. Press the Volume
Up or Down controls to set your own sleep volume. Sleep volume setting is separate from your alarm or regular listening
volume selection.
Use an audio patch cord (available at www.ihomeaudio.com) to play nondocking iPods or other audio devices through the
iP27 Line-in Jack (one end in the devices line out or headphones jack, the other in the iP27 line in jack). Make sure there is
no iPod docked in the iP27 when using the line-in jack. Press the
iPod Play Button.
Using Dimmer
Press the Snooze/Dimmer Button during normal operation to adjust the brightness of LCD display. While operating on AC
current, the switch will toggle between high, medium, low and off settings. In battery mode, the display is off by default. Press
once to activate the display for about 3 seconds.
You can disable the iP27 controls to avoid turning on the device or changing settings while in transit and to save battery life
during extended periods of non-use. To do so, move the
Switch (located on the back of the unit) to the Locked icon
position. A Lock Icon
will appear on the display indicating the unit is locked and controls are inactive. Move the switch to
the Remote position to restore normal function with remote control capability, or to the Off position to restore function with the
remote disabled.
Press the
Button located on the right side of the unit to enable the EXB sound enhancement circuitry. This circuitry is
designed to provide a broader audio image with enhanced low range sound reproduction and UPRO Wide Stereo to bring
added life to compressed MP3 files. The EXB icon will appear in the display when EXB is active. Press switch again to disable
the EXB effect.
UPRO Wide Stereo is based on UPRO technology. UPRO is a Beautiful Enterprise Co Ltd registered
trademark.
13. Servicing The user should not attempt to service the unit beyond those methods described in the users operating
instructions. Service methods not covered in the operating instructions should be referred to qualified service
personnel.
Questions? Visit www.ihomeaudio.com
7
IP27BR IB
The Remote Control controls basic functions on the iP27 and certain iPhone/iPod functions when the iPhone/iPod is docked
in the iP27. For best results, aim remote control towards the remote sensor by the lower right corner of the display.
Move the
alm. reset
OFF
Batteries information:
sleep
mute
snooze
IP27BR IB
The Remote Control controls basic functions on the iP27 and certain iPhone/iPod functions when the iPhone/iPod is docked
in the iP27. For best results, aim remote control towards the remote sensor by the lower right corner of the display.
Move the
alm. reset
OFF
Batteries information:
sleep
mute
snooze
IP27BR IB
Press the Sleep Button while the iPhone/iPod is playing to enter sleep mode, and continue to press to step through the
available sleep times: 90, 60, 30 or 15 minutes. The
will appear on the display. The iP27 will play for the number of
minutes set, growing gradually softer until shutting off both the unit and the iPhone/iPod at the set time. Press the Volume
Up or Down controls to set your own sleep volume. Sleep volume setting is separate from your alarm or regular listening
volume selection.
Use an audio patch cord (available at www.ihomeaudio.com) to play nondocking iPods or other audio devices through the
iP27 Line-in Jack (one end in the devices line out or headphones jack, the other in the iP27 line in jack). Make sure there is
no iPod docked in the iP27 when using the line-in jack. Press the
iPod Play Button.
Using Dimmer
Press the Snooze/Dimmer Button during normal operation to adjust the brightness of LCD display. While operating on AC
current, the switch will toggle between high, medium, low and off settings. In battery mode, the display is off by default. Press
once to activate the display for about 3 seconds.
You can disable the iP27 controls to avoid turning on the device or changing settings while in transit and to save battery life
during extended periods of non-use. To do so, move the
Switch (located on the back of the unit) to the Locked icon
position. A Lock Icon
will appear on the display indicating the unit is locked and controls are inactive. Move the switch to
the Remote position to restore normal function with remote control capability, or to the Off position to restore function with the
remote disabled.
Press the
Button located on the right side of the unit to enable the EXB sound enhancement circuitry. This circuitry is
designed to provide a broader audio image with enhanced low range sound reproduction and UPRO Wide Stereo to bring
added life to compressed MP3 files. The EXB icon will appear in the display when EXB is active. Press switch again to disable
the EXB effect.
UPRO Wide Stereo is based on UPRO technology. UPRO is a Beautiful Enterprise Co Ltd registered
trademark.
13. Servicing The user should not attempt to service the unit beyond those methods described in the users operating
instructions. Service methods not covered in the operating instructions should be referred to qualified service
personnel.
Questions? Visit www.ihomeaudio.com
7
IP27BR IB
Troubleshooting
Symptom
a) For home operation and to charge your iPhone or iPod, plug the AC adaptor cable into the AC Adaptor Jack and the other end
into a standard 120VAC wall socket. Adaptor must be plugged in to charge iPhone/iPod.
b) For portable operation, install 4 AA (LR6) batteries, 2 in each compartment on the bottom of the unit. Make sure polarity matches
diagram in compartments.
iPhone/iPod
does not dock
properly
Possible Problem
Solution
Plug another device into the same outlet to confirm the outlet
is working. Make sure any associated power switch is ON
Make sure the dock insert is the one for for your iPhone/iPod
d) Press the Minute Button to adjust the minute setting. When the correct time is displayed, press the Time Set Button again. Two
beeps will indicate clock setting is complete.
iPhone/iPod is locked up
Buttons/Controls
dont work
iPhone/iPod
iPhone/iPod does
not respond to the
unit
IP27BR IB
Troubleshooting
Symptom
iPhone/iPod didnt
charge
Sound is distorted
Possible Problem
Remove your iPhone or iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPhone or iPod. Then replace it in the dock.
Remote Control
didnt work
Universal Dock
Solution
Battery weak
time set
minute
sleep
hour
hour
minute
sleep
time set
EXB Button
OFF
alm. reset
iPod
snooze/dimmer
OFF
snooze
iPod Play/Pause
Power ON Button
Snooze/Dimmer Button
Volume Up Button
DST Switch
Back of Unit
/off/remote
lock
line in
Line in Jack
DC Jack
Travel Lock/Remote Switch
iP27 Display
DST Indicator
Time/Alarm Display
PM Indicator
EXB Indicator
Alarm Armed
iPod Indicator
Main Battery Low Indicator
Sleep Display
IP27BR IB
Solucionando problemas
1: AC power
2: batteries
La unidad no
funciona (no circula
corriente elctrica)
3: inserts
Causa
Solucin
El tomacorriente no funciona
RESET
E
R SET
TEST
E
T ST
El iPod no encastra
correctamente
iPhone 3G
insert 15
touch 2G
insert 16
nano 4G
insert 17
3G iPhone
iPod touch
nano 4G
4: iPhone/iPod
El cono de batera
baja est destellando
El iPod no se
comunica con la
unidad
Su software es obsoleto
El iPod no responde
10
IP27BR IB
Table of Contents
Solucionando problemas
Sntoma
El iPhone/iPod no
carga
Causa
Solucin
Baje el volumen
Quick Start.................................................................................................................................................................... 1
Controls and Indicators / iP27 Display .................................................................................................................... 2
Maintenance
Maintenance
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should
be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner
or similar materials can damage the surface of the unit.
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits
provide reasonable protection against radio and TV interference in a residential area.
However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate
interference you can try one or more of the following corrective measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the radio or TV.
Use outlets on different electrical circuits for the equipment and the radio or TV.
Consult your dealer or an experienced radio/television technician if the problem still exists.
Modifying or tampering with your systems internal components can cause a malfunction and might invalidate the
systems warranty and void your FCC authorization to operate it.
11