Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 841 views

    Mens Shirt

    Uploaded by

    arunkadve
    This document provides the measurements and drafting method for a men's shirt. It lists the body measurements needed including neck size, chest, sleeve length, and more. It then details the step-by-step process for drafting the shirt pattern on paper through a series of points and lines. This includes drafting the front and back patterns separately, then joining them with a yoke. Pocket placement is also indicated. Diagrams and annotations by Arun Kadve of the Apparel Training & Design Center in Chhindwara accompany the instructions.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Mens Shirt

    Uploaded by

    arunkadve
    841 views13 pages
    This document provides the measurements and drafting method for a men's shirt. It lists the body measurements needed including neck size, chest, sleeve length, and more. It then details the step-by-step process for drafting the shirt pattern on paper through a series of points and lines. This includes drafting the front and back patterns separately, then joining them with a yoke. Pocket placement is also indicated. Diagrams and annotations by Arun Kadve of the Apparel Training & Design Center in Chhindwara accompany the instructions.

    Original Description:

    Men's shirt Drafting

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the measurements and drafting method for a men's shirt. It lists the body measurements needed including neck size, chest, sleeve length, and more. It then details the step-by-step process for drafting the shirt pattern on paper through a series of points and lines. This includes drafting the front and back patterns separately, then joining them with a yoke. Pocket placement is also indicated. Diagrams and annotations by Arun Kadve of the Apparel Training & Design Center in Chhindwara accompany the instructions.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    841 views13 pages

    Mens Shirt

    Uploaded by

    arunkadve
    This document provides the measurements and drafting method for a men's shirt. It lists the body measurements needed including neck size, chest, sleeve length, and more. It then details the step-by-step process for drafting the shirt pattern on paper through a series of points and lines. This includes drafting the front and back patterns separately, then joining them with a yoke. Pocket placement is also indicated. Diagrams and annotations by Arun Kadve of the Apparel Training & Design Center in Chhindwara accompany the instructions.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 13
    At a glance
    Powered by AI
    The document describes the detailed process of drafting a men's shirt pattern including measurements, drafting points, ready patterns and yoke development.

    The drafting method involves drawing lines and points from a base point (point 0) to create the front and back patterns based on given measurements like chest, neck, shoulder etc.

    The steps for yoke development include joining the front and back patterns, marking the yoke height point, neckline points and cutting out the individual front, back and yoke patterns.

    Apparel Training & Design Center, Chhindwara

    MENS SHIRT

    Measurement:

    Neck size
    = 40
    Chest
    = 100
    Centre back length
    = 78
    Half across back
    = 20
    Shoulder length
    = 17
    CB Neck to waist
    = 45
    Sleeve length
    = 66 (Including Cuff depth)
    SLV placket opening = 13 cm. (Depend on style)
    Cuff depth (Width)
    = 6 cm. (Depend on style)
    Cuff length
    = 26 cm. (Depend on style)

    Drafting method:
    Square across and down from point 0

    1 Down from 0:- Centre back length 78 cm. Square out.


    2 Out from 0:Half of the chest measurement plus (+) 10cm.
    ease. Square down to point 3.
    4 Out from 0:Half back neck width 1/5 of neck size minus (-) 5
    mm. all sizes. Square up
    approximately.
    5 Up from 4:Back neck depth 2 cm. all size. Join point 5 and
    point 4 with a smooth curve.
    6 Down from 2:- Half front neck depth. 1/5 of neck size plus (+) 5
    mm. Square out.
    7 Out from 2:Front neck width. 1/5 of neck size minus (-) 5 mm.
    all sizes. Square down to
    point 8
    Join point 8 and point 2 with a slant line.
    9 Up from 8:3.5 cm. approximately (on line 8 to 2)
    Join point 7,9 and point 2 with a smooth curve.
    10 Down from 0:-Armhole depth. of the chest measurement plus
    (+) 2 cm. ease all sizes.
    Square out to point 11.
    12 Down from o:-Neck to waist. (45 cm.) Square out to point 13.
    Point 14 is midpoint of 0 to 10. Square out
    approximately.

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    15 Out from 14:- Half across back width (20 cm.) plus (+) 3 cm.
    ease. Square up to point 16
    and down to point 17 on chest line.
    18 Out from 11:- Half across front. Equal to point 14 to 15 minus (-)
    1 cm. Square up to
    Point 19.
    Point 20 is the midpoint of point 0 to 2. Square
    down to point 21,22 and 23.
    24 down from 20:- Back shoulder slop 1/20 of the chest
    measurement plus (+) 1 cm.
    25 down from 20:- Front shoulder slop 1/14 of the chest
    measurement plus (+) 1 cm. all sizes.
    Join point 5 to 24 with slant line.
    Join point 5 to 25 with slant line.
    26 Out from 5:Shoulder length (17 cm.)
    27 Out from 7:Shoulder length (17 cm.)
    Draw an extended line from point 17 and 18.
    28 Up from 17:3.5 cm. approximately (On 45* angle).
    29 Up from 18:3.0 cm. approximately (On 45* angle).
    Join point 26 to 15 with a smooth curve.
    Join point 15, 28 and 21 with a smooth curve.
    Join point 27 to 29 with a smooth curve.
    Join point 29 to 21 with a smooth curve.

    Pocket placement:

    30
    31
    32
    33

    Down from 2:- 23 cm. (DOS).


    Out from 30:- 4 cm. all sizes. Square down.
    Out from 31:- Pocket width 14 cm. (DOS). Square down.
    Down from 32:-Pocket length 16 cm.(DOS).Square out to point 34.

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    2 Piece Ready pattern before yoke development


    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    Front ready pattern:


    Cut along the points
    6,30,11,13,3,23,22,21,29,27,7,9 and till point 6.

    Back ready pattern:


    Cut along the points
    0,14,10,12,1,23,22,21,28,15,26,5 and till point 0.

    Ready pattern
    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    Yoke development:
    Join front and back pattern with shoulder line
    and tape.

    35 Down from O:- CB yoke height 9 cm.(DOS).Square out to point 36


    on back armhole line.
    37 Out from 7:2.5 cm. on neckline (DOS).
    38 Out from 27:Equal to point 7 to 37. Join point 37 and 38 with
    slant line.
    Bland neck curve and armhole curve if needed.

    Blend
    Neck and
    Armhole
    shape if
    needed

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    3 Piece Ready pattern after yoke development


    Front ready pattern:
    Cut along the points 6,30,11,13,3,23,22,21,38,37,9 and till point 6.

    Back ready pattern:

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara


    Cut along the points 35,14,10,12,1,23,22,21,28,15,36 and till
    point 35.

    Yoke ready pattern:


    Cut along the points 0,35,36,26,27,38,37,7,5 and till point 0.

    Ready pattern after yoke development

    Final (Production) pattern after yoke development


    Front Final pattern:

    Cut along the points 6,30

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    Back Final pattern:


    Yoke Final pattern:

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    Arun kadve
    ATDC Chhindwara

    Apparel Training & Design Center, Chhindwara

    Arun kadve
    ATDC Chhindwara

    You might also like