Daikin HVAC Operation+Manual

WIRED REMOTE
CONTROLLER
OPERATION MANUAL
BRC1E52A7
Proper Use for Effective Energy Saving

Thank you for purchasing the wired remote controller.
This manual describes safety precautions required for the use of the
product.
Read this manual carefully and be sure you understand the

information provided before attempting to use the product.
Keep this manual where it is readily accessible after reading it through.
If another user operates the product in the future, be sure to hand over
this manual to the new user.
Contents
Notices
Safety Precautions ................................................... 2

Items to be Strictly Observed ............................ 3
Names and Functions............................................... 7
Simple settings in Direct

buttons for basic operations
Basic Operation Method
(Use of Direct Buttons)
Cool/Heat/Auto/Fan Operation ............................... 13

Program Dry Operation .......................................... 17
Setback................................................................... 19
Ventilation Operation When Air Conditioner
Interlocked with Total Heat Exchanger ................... 20
Setting Method of the Cooling/Heating
Selection Eligibility .................................................. 21
Key Lock ................................................................. 23
Quick Reference of
Main Menu Items
Main Menu Items .................................................... 25
Menu manipulation
Manipulating the Main Menu Screen ...................... 29

Individual Air Flow Direction ................................... 30
Quick Start (SkyAir only) ........................................ 32
Ventilation ............................................................... 34
Energy Saving Options ........................................... 36
Schedule................................................................. 44
Filter Auto Clean ..................................................... 50
Maintenance Information ........................................ 51
Configuration .......................................................... 52
Current Settings...................................................... 56
Clock & Calendar.................................................... 57
Language................................................................ 60
Maintenance
Filter Sign Resetting ............................................... 61

Maintenance of Unit and LCD ................................ 62
Useful information
Error code Display .................................................. 63

After-sale Service ................................................... 64
Operation manual
BRC1E52A7
4PW71265-1 10.2011
Safety Precautions
The original instructions are written in English. All other languages are translations of the original
instructions.
This appliance is not intended for use by persons, including children, with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of appliance by a person responsible for their safety.
Childen should be super be supervised to ensure that they do not play with the appliance.
Read the safety precautions attentively for the correct use of the product.
The precautions described herein are classified as WARNING and CAUTION.
They both contain important information regarding safety. Be sure to observe all precautions
without fail.
WARNING
Failure to follow these instructions properly may result in personal

injury or loss of life.
CAUTION
Failure to observe these instructions properly may result in property

damage or personal injury, which may be serious depending on the
circumstances.
The following pictograms are used in this manual.

Never do.
Always follow the instructions given.
Be sure to ground the unit.
Absolutely keep wet hands away.
Absolutely keep water and moisture

away.
About Remote Controller
WARNING
Do not install the remote controller by yourself.
Improper installation may result in electric shocks or fire.
Consult your Daikin dealer.
Do not modify or repair the remote controller.

This may result in electric shocks or fire.
Do not relocate or reinstall the remote controller by yourself.

Improper installation may result in electric shocks or fire.
Do not use flammable materials (e.g., hairspray or insecticide) near the

product.
Do not clean the product with organic solvents such as paint thinner.
The use of organic solvents may cause crack damage to the product, electric shocks, or
fire.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
Items to be Strictly Observed

CAUTION
Do not play with the unit or its remote controller.
Accidental operation by a child may result in impairment of bodily functions and harm
health.
Never disassemble the remote controller.
Touching the interior parts may result in electric shocks or fire.

Consult your Daikin dealer or authorized contractor for internal inspections and
adjustments.
To avoid electric shocks, do not operate with wet hands.

Do not wash the remote controller.
Doing so may cause electric leakage and result in electric shocks or fire.
Do not leave the remote controller wherever there is a risk of wetting.
If water gets into the remote controller there is a risk of electrical leakage and damage to
electronic components.
Indoor Unit and Outdoor Unit
WARNING
Be aware that prolonged, direct exposure to cool or warm air from the air
conditioner, or to air that is too cool or too warm can be harmful to your
physical condition and health.
Do not place objects, including rods, your fingers, etc., in the air inlet or
outlet.
Injury may result due to contact with the air conditioner's highspeed fan blades.
Contact professional personnel about attachment of accessories and be

sure to use only accessories specified by the manufacturer.
If a defect results from your own workmanship, it may result in water leaks, electric
shock or fire.
Do not use the product in the atmosphere contaminated with oil vapor,
such as cooking oil or machine oil vapor.
Oil vapor may cause crack damage, electric shocks, or fire.
Do not use the product in places with excessive oily smoke, such as
cooking rooms, or in places with flammable gas, corrosive gas, or metal
dust.
Using the product in such places may cause fire or product failures.
Beware of fire in case of refrigerant leakage.
If the air conditioner is not operating correctly, i.e. not generating cool or warm air,
refrigerant leakage could be the cause. Consult your dealer for assistance. The
refrigerant within the air conditioner is safe and normally does not leak. However, in the
event of a leakage, contact with a naked burner, heater or cooker may result in generation
of noxious gas. Do not longer use the air conditioner until a qualified service person
confirms that the leakage has been repaired.
Operation manual
BRC1E52A7
4PW71265-1 10.2011
Safety Precautions
WARNING
In the case of using a load breaker provided with a fuse, make sure that
the capacity of the fuse is correct.
Use of an ordinary conductive wire may cause malfunctions or fire.
Do not start or stop operating the air conditioner with the power supply
breaker turned ON or OFF.
Otherwise, fire or water leakage may result.

Furthermore, the fan will rotate abruptly if power failure compensation is enabled, which
may result in injury.
Be sure to earth the unit.
Do not earth the unit to a utility pipe, lightning conductor or telephone earth lead. Imperfect
earthing may result in electric shocks or fire. A high surge current from lightning or other
sources may cause damage to the air conditioner.
When the air conditioner is malfunctioning (giving off a burning odour, etc.)
turn off power to the unit and contact your local dealer.
Continued operation under such circumstances may result in a failure, electric shocks or
fire hazards.
Consult your local dealer regarding what to do in case of refrigerant

leakage.
When the air conditioner is to be installed in a small room, it is necessary to take proper
measures so that the amount of any leaked refrigerant does not exceed the
concentration limit in the event of a leakage.
Otherwise, this may lead to an accident due to oxygen depletion.
Be sure to install an earth leakage breaker.
Failure to install an earth leakage breaker may result in electric shocks or fire.
Consult the dealer if the air conditioner submerges owing to a natural

disaster, such as a flood or typhoon.
Do not operate the air conditioner in that case, or otherwise a malfunction, electric
shock, or fire may result.
Be sure to use a dedicated power supply for the air conditioner.
The use of any other power supply may cause heat generation, fire, or product failures.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
Items to be Strictly Observed

CAUTION
After prolonged use, check the unit stand and its mounts for damage.
If left in a damaged condition, the unit may fall and cause injury.
Do not allow a child to mount on the outdoor unit or avoid placing any
object on it.
Falling or tumbling may result in injury.
Do not block air inlets nor outlets.
Impaired air flow may result in insufficient performance or trouble.
To avoid injury, do not touch the air inlet or aluminium fins of the unit.
Do not remove the outdoor unit's fan guard.
The guard protects against the unit's high speed fan, which may cause injury.
Do not place objects that are susceptible to moisture directly beneath

the indoor or outdoor units.
Under certain conditions, condensation on the main unit or refrigerant pipes, air filter dirt
or drain blockage may cause dripping, resulting in fouling or failure of the object
concerned.
Do not place water containers (flower vases, etc.) on the unit, as this
may result in electric shocks or fire.
Do not use the air conditioner for purposes other than those for which it
is intended.
Do not use the air conditioner for cooling precision instruments, food, plants, animals or
works of art as this may adversely affect the performance, quality and/or longevity of the
object concerned.
Do not place appliances that produce naked flames in places exposed to

the air flow from the unit as this may impair combustion of the burner.
Do not place heaters directly below the unit, as resulting heat can cause
deformation.
Be sure that children, plants or animals are not exposed directly to
airflow from the unit, as adverse effects may ensue.
Do not put flammable containers, such as spray cans, within 1m from the
blow-off mouth.
The containers may explode because the warm air output of the indoor or outdoor unit
will affect them.
Do not install the air conditioner at any place where there is a danger of
flammable gas leakage.
In the event of a gas leakage, build-up of gas near the air conditioner may result in fire
hazards.
Do not sit or stand on any unstable base at the time of operating or

maintaining the air conditioner.
The base may topple down and injury may result.
Operation manual
BRC1E52A7
4PW71265-1 10.2011
Safety Precautions
CAUTION
Do not touch the motor at the time of filter replacement.
The motor in operation is at high temperatures and a burn may result.
Do not wash the air conditioner with water, as this may result in electric
shocks or fire.
Perform ventilation from time to time.
Be careful when using the air conditioner with other heating equipment.
Insufficient ventilation may result in oxygen deficiency.
Always stop the operation of the air conditioner and turn OFF the
breaker at the time of cleaning.
Failure to do so may result in an electric shock or injury.
Do not wash the interior of the indoor and outdoor units by yourself.
Always consult your Daikin dealer.
The use of an incorrect washing method or incorrect detergent may damage the resin
parts of the indoor unit or cause water leakage.
Moreover, malfunctions, smoke generation, or ignition may result if the electric parts or
motor in the indoor unit is wet with detergent.
Do not place objects in direct proximity of the outdoor unit and do not let
leaves and other debris accumulate around the unit.
Leaves are a hotbed for small animals which can enter the unit. Once in the unit, such
animals can cause malfunctions, smoke or fire when making contact with electrical
parts.
Fix the units securely.
If the units are not mounted securely, the units may fall or topple and injury may result.
Arrange the drain to ensure complete drainage.
If proper drainage from the outdoor drain pipe does not occur during air conditioner
operation, there could be a blockage due to dirt and debris build-up in the pipe.
This may result in a water leakage from the indoor unit. Under these circumstances,
stop air conditioner operation and consult your dealer for assistance.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
Names and Functions

1. Operation mode
selector button
11. LCD (with backlight)
4. Up button
5. Down button
6. Right button
7. Left button
9. Operation lamp
8. On/Off button
3. Menu/Enter button
10. Cancel button
2. Fan speed/Airflow
direction setting
button
Functions other than basic operation items (i.e., On/Off, Operation
mode selector, Fan speed/Airflow direction, and temperature
settings) are set from the menu screen.
NOTE
Do not install the remote controller in places exposed to direct sunlight.
Otherwise, the LCD may become discolored and nothing may be displayed.
Do not pull or twist the remote controller cord.
Otherwise, the remote controller may malfunction.
Do not press the buttons on the remote controller with objects with sharp ends.
Otherwise, the remote controller may be damaged or malfunction.
Operation manual
BRC1E52A7
4PW71265-1 10.2011
1. Operation mode selector button

Press this button to select the operation
mode of your preference. (See page 21.)
* Available modes vary with the connecting
model.
2. Fan speed/Airflow direction

setting button
Used to indicate the Air Volume/Airflow
direction setting screen. (See page 14.)
* Available fan speed and Airflow direction
vary with the connecting model.
3. Menu/Enter button
Used to indicate the main menu.
(See page 25 for the menu items.)
Used to enter the setting item selected.
4. Up button (Be sure to press the

part with the symbol )
Used to raise the set temperature.
The next items on the upper side will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected.
5. Down button (Be sure to press

the part with the symbol )
7. Left button (Be sure to press

Used to highlight the next items on the
left-hand side.
Each screen is scrolled in the left-hand
direction.
8. On/Off button
Press this button and system will start.
Press this button again and system will
stop.
9. Operation lamp (Green)

This lamp lights up during operation.
This lamp blinks if a error occurs.
10.Cancel button
Used to return to the previous screen.
11. LCD (with backlight)

The backlight will be light for approximately
30 seconds by pressing any operation
button. Operate buttons excluding the On/
Off button while the backlight is lit.
If 2 remote controllers are used to control a
single indoor unit, the backlight of the
remote controller operated earlier than the
other one will be lit.
Used to lower the set temperature.

The next items on the lower side will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected.
6. Right button (Be sure to press

Used to highlight the next items on the
right-hand side.
Each screen is scrolled in the right-hand
direction.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
Names and Functions

Liquid Crystal Display
Two types of liquid crystal display (LCD) are available. The standard display is by
default set.
To go to the detailed display, select the detailed display in the main menu. (See page 53.)
The displayed contents of the screen vary with the operation mode of the equipment
interlocked. (The following display will appear when the air conditioner is in automatic
heating operation.)
Standard display
10.Changeover under control

9.Under centralized
control
1.Operation mode
Auto
11.Setback
8.( ) display
Set to
Cool
Heat
2.Fan speed
6.Ventilation/
purifying
7.(
28C
20C
This function not available
<Standard display example>
) display
3.Set/Setback
temperature display
4.Defrost/Hot start
5.Message
Detailed display
The airflow direction, clock, and detailed selection items appear

on the detailed display screen in addition to the items appearing
on the standard display.
12.Airflow direction
Auto
(Displayed only when

the air conditioner is in
operation.)
Return
Fr i
11:03
Setback Room
Cool 28C
Heat 20C 20C
Setting
<Detailed display example 1>
14.Detailed selection
(with room
temperature settings)
(with no clock settings)
Auto
12.Airflow direction
(with no airflow direction

function)
3.Set/Setback
temperature display
13. Clock display
2.Fan speed
(with no fan speed

control function)
13.Clock (12/24 hours

real time clock)
Return
--:--
Set to
Cool 28C
Heat 20C
15. (
) display
14. Detailed selection

(with no detailed
items selected)
Setting
<Detailed display example 2>

Operation manual
BRC1E52A7
4PW71265-1 10.2011
1. Operation mode
"Error: Press Menu Button."

"Warning: Press Menu Button."
Displayed if an error or a warning is
detected (see page 63).
Used to display the present operation

mode Cool, Heat, Vent, Fan, Dry or Auto
mode.
"Quick Start" (SkyAir only)

Displayed if the quick cooling/heating
function is turned ON (see page 32).
2. Fan speed
Used to display the fan speed that is set for
the air conditioner.
The fan speed will not be displayed if the
air conditioner does not have fan speed
control function.
3. Set/Setback temperature
display
"Time to clean filter."

"Time to clean element."
"Time to clean filter and element."
Displayed when the time to clean the filter
or element has come (see page 61).
6. Ventilation/Purifying
Displayed when a total heat exchanger
unit, such as the Ventiair, is connected.
Ventilation mode icon."
"
These icons indicate the current ventilation
mode (HRV only) (AUTOMATIC, ENERGY
RECLAIM VENTILATION, BYPASS).
AIR Purifying ICON "
"
This icon indicates that the air cleaning unit
(option) is operational.
When the unit is turned on, Set to indicates

the temperatures that are set for the air
conditioner.
When the unit is turned off, Setback
indicates the temperatures that are set for
the setback function.
4. Defrost/Hot start "

(See page 16.)
"
If Ventilating operation "

" is displayed:
Displayed when a total heat exchanger
unit, such as the Ventiair, is connected.
For details, refer to the Operation Manual
of the Ventiair.
5. Message
The following messages are displayed.
"This function not available."
Displayed for a few seconds when an
operation button is pressed if the indoor
unit is not provided with the corresponding
function.
If a number of indoor units are in operation,
the message will appear only if none of the
indoor units is provided with the
corresponding function, i.e., the message
will not appear if at least one of the indoor
units is provided with the corresponding
function.
BRC1E52A7
4PW71265-1 10.2011
7.
display (See page 23.)

Displayed when the key lock is set.
8.
display (See page 42 and
49.)
Displayed if the schedule timer or

OFF timer is enabled.
9. Under Centralized control " "

Displayed if the system is under the
management of central control equipment
(optional accessories) and the operation of
the system through the remote controller is
prohibited.
10.Changeover under control "
"
(VRV only)
Displayed on the remote controller if the
remote controller has no cooling/heating
selection eligibility mode (see page 21).
Operation manual
10
Names and Functions

11. Setback "
" (See page 19.)
The setback icon flashes when the unit is

turned on under the setback control.
12.Airflow direction "
"
Displayed when the airflow direction and

swing are set (see page 15).
This item is not displayed if the system is
not provided with a function to set airflow
directions.
13.Clock (12/24 hours real time

clock)
Displayed if the clock is set (see
page 57).
If the clock is not set, " -- : -- " will be
displayed.
14.Detailed selection
Displayed if the detailed display mode is
selected (see page 53).
No detailed items are by default selected.
15.
display
Displayed to inform that the clock needs to

be set again.
The schedule timer function will not work
unless the clock is set again.
Operation manual
11
BRC1E52A7
4PW71265-1 10.2011
BRC1E52A7
4PW71265-1 10.2011
Operation manual
12
Basic Operation Method (Use of Direct Buttons)

Cool/Heat/Auto/Fan Operation
Remote Controller Functions
Operation Method
Operation
screen display
Main Menu
Setting
Return
Discribes screens that

will be displayed on the
remote controller in
operation.
1/2
Quick Start
Ventilation
Energy Saving Options
Schedule
Filter Auto Clean
Maintenance Information
Schedule
Clock has not been set.
Would you like to set it now?
Yes
Return
No
Setting
Operation
button display
Operation procedure
Explains a button operation procedure
for the remote controller.
Operate the buttons according to the
procedure.
Displays the positions of

buttons to be operated.
Display the main menu screen. (See

page 29.)
Press
buttons to select Schedule
the main menu screen. Press Menu/Enter
button to display the schedule screen.
Before setting the schedule, the clock must
be set.
If the clock has not been set, a screen like
the one on the left will appear.
Press
buttons to select Yes and
press Menu/Enter button.
The date & time screen will appear.
Set the current year, month, day, and time.
(See "Clock & Calendar" on page 57.)
Date & Time

Year 2011
Month 01
Day
01
Tuesday
12:00
Return
(SkyAir and VRV)
Setting
Preparation
For mechanical protection purposes, turn ON the system at least 6 hours before starting the
operation of the system.
Do not turn OFF the system in season in order to ensure the smooth starting of the system.
Operation Method
Cool
Set to
Cool 28C
Press Operation Mode Selector button several times

until the desired mode Cooling, Heating, Fan, or Auto
mode is selected.
* Unavailable operation modes are not displayed.
* Only the Cooling or Fan mode can be selected if the air
conditioner is a cooling-only model.
* Changeover under control will appear on each remote controller,
but only the Cooling or Fan mode can be set in the case of the
VRV cooling-only system.
Note
Before making a mode change, make sure that Changeover
under control is not displayed on the remote controller.
The cooling or heating mode cannot be selected if the above is
displayed on the remote controller. See page 21 if Changeover
under control display blinks.
Operation manual
13
BRC1E52A7
4PW71265-1 10.2011
2
3
Press On/Off button.

The Operation lamp (green) will be lit and the
system will start operating.
Cool
Set to
Cool 28C
The set temperature will increase by

1C when
button is pressed and decrease by
1C when
button is pressed.
* No temperature settings are possible while in fan mode.
Cool
Set to
Cool 28C
To select Air Volume or airflow direction setting,

press
buttons.
Air Volume/direction
Air Volume
Low
Return
Return
To make Air Volume and/or airflow direction

control, press Fan speed/airflow direction setting
control button.
Direction
Position 0
Setting
Low
Middle
Auto
High
BRC1E52A7
4PW71265-1 10.2011
With Air Volume setting selected, select the

desired fan speed from Low, Medium, High or Auto
using the
buttons.
* Two fan speed adjustment levels Low, High may
be available depending on the type of indoor unit.
* The system may be in automatic fan speed
control for mechanical protection purposes.
* The system may be in automatic fan speed
control according to the room temperature.
The fan may stop operating, which, however, is
not a failure.
* The completion of Air Volume selection may take
time, which, however, is not a failure.
* In auto mode setting, the fan speed setting is
adjusted automatically according to setpoint and
indoor temperature. In case Fan only the fan
speed setting is high.
Operation manual
14

Air Volume
Low
Return
Return
Direction
Position 0
Setting
Air Volume
Low
Return
Return
Direction
Swing
Setting
Airflow direction
setting (up/down)
Air Volume
Low
Return
Return
Direction
Swing
Setting
With airflow direction setting selected, select the

desired airflow direction from No Ind Set ,
Position 0 , Position 1 , Position 2 , Position 3 ,
Position 4 , Swing , and Auto using the
buttons.
Note
Airflow direction appears on the screen as below.
0 : Position
0
1 : Position
4
0
1
2 : Position
2
3
1
3 4
2
3 : Position
Up/down direction
Left/right direction
4 : Position
0
1
2
3
4
Selecting Swing will cause the airflow direction

blades to swing back and forth.
For the swing setting only, all positions will be
displayed.
When you select one of positions 0 to 4, the
airflow direction blades stay in a fixed position.
Airflow direction
setting (left/right)
Pressing Menu/Enter button confirms the settings

and takes you back to the basic screen.
Movement of airflow direction blades

Under the operation conditions shown below, airflow direction is controlled automatically. Actual
operation may thus be different than what is displayed on the remote controller.
Operation
condition
Room temperature is higher than the remote controller's set temperature

(in heating mode).
When defrosting (in heating mode).
(The airflow is blowing horizontally so that people in the room are not in
direct line of the cold air.)
Under continuous operation with the airflow blowing horizontally.
Heating mode includes automatic operation.
Operation manual
15
BRC1E52A7
4PW71265-1 10.2011
The Operation lamp will be turned OFF and the

system will stop operating when On/Off button is
pressed again.
* While the system is in heating operation, the
system will be in fan operation for approximately
1 minute in order to eliminate the heat in the
indoor unit after the heating operation comes to a
stop.
Note
Do not turn power OFF soon after the system stops operating.
Be sure to wait for at least 5 minutes so that the drain
discharging device will finish discharging the residual drain.
Otherwise, water leakage or failures may result.
Characteristics of Heating Operation

Starting operation
The system in heating operation generally requires a long time to

attain the set temperature compared with the system in cooling
operation.
It is recommended to start operating the system in advance by utilizing
the timer.
Perform the following operation of the system in order to prevent the

degradation of the heating capability or cold winds from blowing out.
Defrosting
operation
The heating capability of the system will drop if the outdoor unit frosts
up. Therefore, the system will go into defrosting operation
automatically.
The system will stop blowing out hot air, and "
" (Defrost/Hot
start) will be displayed on the remote controller.
The system will return to normal operation with an elapse of
approximately 6 to 8 minutes (but not more than 10 minutes).
Hot start
(VRV only)
When the system goes into heating operation, the fan will go into
breezing operation in order to prevent cold air from blowing out of the
system in defrosting operation.
(In that case, "
" (Defrost/Hot start) will be displayed on the
remote controller.)
BRC1E52A7
4PW71265-1 10.2011
Operation manual
16
Outdoor
temperature and
heating capability
The heating capability of the system will drop with a decrease in

outdoor temperature.
If that happens, use the system along with another heating appliance.
(In the above case, be sure to ventilate the room as frequently as
possible.)
Do not use the heating appliance in places where the heating
appliance is exposed to the wind from the system.
The system is of hot air circulation type. Therefore, it takes some time
for the room to become warm after the system starts operating.
The indoor fan will automatically go into breezing operation until the
inner temperature of the system rises to a certain level.
If the hot air stays around the ceiling and your feet feel cold, the use of
a circulator is recommended.
For details, consult your Daikin dealer.
Program Dry Operation

Preparation
The dry mode may not be selected if the remote controller has no eligibility to select cooling/
heating mode (see page 22 for details).
Operation Method
Dry
Press Operation Mode Selector button several

times until the Dry operation is selected.
* The dry operation may not be available depending on the type of
indoor unit.

The Operation lamp (green) will be lit and the
system will start operating.
* The microcomputer is in automatic temperature and fan speed
control. Therefore, temperature or fan speed settings cannot be
made or changed while the air conditioner is in operation.
Operation manual
17
BRC1E52A7
4PW71265-1 10.2011
3
4
To Make airflow direction settings see page 14.

system will stop operating when On/Off button is
pressed again.
Note
Do not turn power OFF soon after the system stops operating.
Be sure to wait for at least 5 minutes so that the drain
discharging device will finish discharging the residual drain.
Otherwise, water leakage or failures may result.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
18

Operation Contents
Program Dry
The Program dry function of the system repeats the weak cooling
operation of the system intermittently to dehumidify the room without
dropping the room temperature as much as possible for the
prevention of excessive cooling.
Program Dry Operation

The microcomputer is in automatic temperature and fan speed control. Therefore, temperature or
fan speed settings cannot be made or changed while the air conditioner is in operation.
Setback
The Setback feature will maintain the space temperature in a specific range during unoccupied
periods.
Note
This function will temporarily start an indoor unit that was previously turned off by the user or
turned off from a schedule event/off timer.
This function is by default enabled in Cool mode and Heat mode. This function can only be
enabled/disabled by the system installer.
For example:
If the room temperature drops below 10C, heating is started automatically. As soon as 12C
is reached, the controller returns to its original status.
If the room temperature goes above 35C, cooling is started automatically. As soon as 33C is
reached, the controller returns to its original status.
The differential can be adjusted in the Setback configuration menu (see page 38). The setback
temperature can be set during the unit is turned off on basic screen when the unit is turned off or
set in the schedule.
Operation Method
Cool
Setback
Cool
Operation manual
19
The setback can not be enabled when a centralized control is connected.

The setback icon flashes when the unit is turned
on under the setback control.
28C
BRC1E52A7
4PW71265-1 10.2011
Ventilation Operation When Air Conditioner Interlocked with Total Heat Exchanger
Preparation
Operation Method
Vent
Set the Operation mode selector button to

Ventilation in the case of operating the total heat
exchanger without the cooling/heating between
seasons.
To change the ventilation mode setting, make necessary settings

from the main menu (see page 35).
To change the ventilation rate, make necessary settings from the

main menu (see page 34).
* Ventilation mode: Auto, Energy Reclaim Ventilation, and Bypass
* Ventilation rate: Low or High

The Operation lamp (green) will be lit and the total
heat exchanger will start operating.

total heat exchanger will stop operating when On/
Off button is pressed again.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
20

Setting Method of the Cooling/Heating Selection Eligibility
(VRV only)
Setting Changes
Cool
Set to
Cool 28C
Return
Cool
Setting
Set to
Cool 28C
See "Cool/Heat Selection Eligibility" on page 22 for an explanation of the

cooling/heating selection eglibility.
Continue pressing Operation Mode Selector button
of the remote controller for at least 4 seconds.
(During backlight lit)
A remote controller will not display
"
" (Changeover under control) if a cooling/
heating selection eligibility is granted to the remote
controller.
The display "
" (Changeover under control) on each remote
controller connected to the same outdoor unit or BS unit will start
blinking.
* Vent mode setting changes are possible regardless of the
cooling/heating selection eligibility.
* If a cooling/heating selection eligibility is set in the "cooling/
heating selection remote controller" ( ), all the remote
controllers will display "
" (Changeover under control). In this
case, no cooling/heating selection eligibility can be set in the
remote controllers.
Refer to the operation manual provided to the outdoor unit for the
details of the "cooling/heating selection remote controller".
Set a cooling/heating selection eligibility as explained below.
Selection Settings
Cool
Cool
Set to
Cool 28C
Set to
Cool 28C
Operation manual
21
The display "

" (changeover under control) will blink when the power is
turned ON for the first time.
Press Operation Mode Selector button of the
remote controller for which the selection eligibility
to be set.
Then the cooling/heating selection eligibility will be
set and the display
"
" (Changeover under control) will disappear.
The display "
" (Changeover under control)
will appear on the other remote controllers.
BRC1E52A7
4PW71265-1 10.2011
Operation Method
Cool
Set to
Cool 28C
Press the remote controller that has the cooling/

heating selection eligibility (or the remote controller
without the display
" (Changeover under control))several times
"
until the desired mode is selected. The display will
change to "Fan", "Dry", "Auto", "Cool", "Heat" each
time the button is pressed.
The display "Auto" will appear for the heating/
cooling simultaneous operation system only.
At that time, the other remote controllers with no
selection right will follow suit and change the
display automatically.
Cool/Heat Selection Eligibility

The "Cool", "Heat", "Auto" can be set for only the remote controller for which the cooling/heating
selection eligibility is set.
(The display "Auto" will appear for the heating/cooling simultaneous operation system only.)
1.
The remote controller with

the selection eligibility
(without "
"
(Changeover under
control) displayed)
Set to "Cool", "Heat",

"Dry", "Auto" mode.
Other remote controllers

(with "
"
(Changeover under
control) displayed)
The system will go into the mode set in
the remote controller with the selection
eligibility. No other modes are
available.
The system, however, can be switched
to fan mode or from "Cool" to "Dry".
2.
The remote controller with

the selection eligibility
(without "
"
(Changeover under
control) displayed)
Set to "Fan" mode.
Other remote controllers

(with "
"
(Changeover under
control) displayed)
The system cannot be set to other
modes except fan mode.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
22

Precautions for Setting Cooling/Heating Selection Eligibility
The cooling/heating selection eligibility needs to be set for a single remote controller in the
following case.
(Cooling/Heating selected operation system)
(Cooling/Heating simultaneous operation system)
BS unit:
The BS unit is used for cooling or
heating mode selection.
Indoor unit
Indoor unit
A number of indoor units are

connected to a single outdoor unit.
A single BS unit is connected to a

number of indoor units.
Set the cooling/heating/fan selection

eligibility in one of the remote controllers.
Set the cooling/heating/auto/fan selection

eligibility in one of the remote controllers.
Key Lock
Operation Method
Cool
Set to
Cool 28C
Make settings and cancel settings in the basic screen.

Continue pressing Menu/Enter button for at least
4 seconds. (During backlight lit)
Basic screen
Cool
Set to
Cool 28C
Operation manual
23
" " will appear.

All buttons are disabled when the keys are locked.
To cancel the key lock mode, continue pressing
Menu/Enter button for at least 4 seconds. (During
backlight lit)
BRC1E52A7
4PW71265-1 10.2011
BRC1E52A7
4PW71265-1 10.2011
Operation manual
24
Quick Reference of Main Menu Items

The main menu has the following items.
Setting and display items
Air Flow
Direction
Description
Reference page
Individual setting
You can set an Air flow direction for each 4

flaps individually.
In case of SkyAir, maximum 4 units (unit A,
B, C, D)
In case of VRV, maximum 16 units (unit 0 till
15)
30
Individual setting list
You can see the table for setting for each 4

flaps.
31
Individual set all

reset
You can clear all of the individual settings.
32
Used to set the room to a conformable

temperature quickly (unless the system is
not in program dry or fan operation).
The maximum quick cooling/heating
operation period is 30 minutes.
32
Ventilation rate
Used to set to "Low" "High"
34
Ventilation mode
Used to set Auto, Energy Reclaim

Ventilation, and Bypass.
35
Energy Saving
Options List
Validity or invalidity can be set up about the

following menus.
36
Setpoint Range
Setting
The setting temperature range can be

restricted.
It is possible to restrict the temperature range
based on a model and the mode of operation.
37
Set back condition
Determine the point when unit is turned off

again from the setback control. (recovery
differential).
38
(only if the
individual air flow
function is
installed)
Quick Start
(SkyAir only)
Ventilation
Ventilation
operation
settings for total
heat exchanger
Energy
Saving
Options
Operation manual
25
Sensing Sensor (low) When no people are detected during a

continuously fixed time, the function will
(only if the sensing
automatically change the air conditioning
sensor is installed)
target temperature.
If people are detected, it will return to the
normal set temperature.
39
Sensing Sensor
(stop) (only if the
sensing sensor is
installed)
When no people are detected during a

continuously fixed time, the function will
automatically stop the air conditioning.
40
Setpoint Auto Reset
Even if the set temperature is changed, it

returns to the preset temperature after
progress of a defined period of time.
41
BRC1E52A7
4PW71265-1 10.2011
Energy
Saving
Options
Off Timer
Description
Reference page
After you turn on the unit, it will automatically

turn off in a defined period of time.
42
Possible to set in 10 minute increments from

30 to 180 minutes.
Electricity
consumption
An indicative electricity consumption until now

is displayed. This enables the customer to
evaluate the trend of the electricity
consumption.
Note: Displayed electricity consumption is not
result of a kWh measurement, but results from
a calculation with running data of the unit.
Some factors in this calculation are absolute
values, but other factors merely result from
interpolations with tolerance. This explains
why the readout may deviate from the actual
electricity consumption.
43
Enable/Disable
Validity or invalidity of a schedule function can

be changed.
49
Schedule Number
Settings
The schedule number that must be active can

be selected (schedule nr 1, 2, or 3).
45
Holidays
Convenient holiday settings and temporary

closure settings are possible.
46
Settings
Set the startup time and operation stop time.

ON: Startup time, cooling and heating
temperature setpoints can be configured.
OFF: Operation stop time, cooling and
heating setback temperature setpoints can
be configured.
(--: Indicates that the setback function is
disabled for this time period.)
_: Indicates that the temperature setpoint
and setback temperature setpoint for this
time period is not specified. The last active
setpoint will be utilized.
Up to 5 actions can be set for each day.
47
Filter Auto Clean
This function is available only on the model

whose panel has automatic cleaning function
of filter.
For detailed operation refer to the operation
manual of these models.
50
Used to display the service contact and

model information.
51
Schedule
BRC1E52A7
4PW71265-1 10.2011
Operation manual
26
Quick Reference of Main Menu Items

Description
Reference page
Configuration Draft prevention (only The draft prevention function can be enif the sensing sensor is
installed)
abled or disabled.
52
Display
Used to set to standard or detailed display

mode.
Display
Standard or detailed display
Detailed display settings
Selectable from the display room temperature, outdoor temperature, system, or without
any display items.
53
Contrast Adjustment
Used to make LCD contrast adjustment.
55
Current Settings
Used to display a list of current settings

for available items.
56
Clock &
Calendar
Used to configure date and time settings

and corrections.
57
Date & Time
The default time display is 24H.

The clock will maintain accuracy to within
30 seconds per month.
If there is a power failure for a period not
exceeding 48 hours, the clock will continue
working with the built-in backup power supply.
12H/24H Clock
Language
The time can be displayed in either a 12 hour

or 24 hour time format.
59
The displayed language can be selected from

the following language. (English/Deutsch/
Franais/Espaol/Italiano/E/
Nederlands/Portugues/Pycc/rke/
Polski)
60
Note: Available setting items vary with the model connected.

Only the available setting items appear in the menu.
Menu Items of Sub Remote Controller
Indoor unit
If 2 remote controllers are in control of a single indoor unit,

the following menu items are not set in the sub remote
controller. Set them in the main remote controller.

Schedule
Setback
Filter auto clean
Operation manual
27
Outdoor unit
2 remote controllers
in control
BRC1E52A7
4PW71265-1 10.2011
BRC1E52A7
4PW71265-1 10.2011
Operation manual
28
Menu Manipulation
Manipulating the Main Menu Screen
Display Method for Main Menu
Operation Method
Press Menu/Enter button.

Cool
Set to
Cool 28C
Basic screen
MainMenu
1/2
Quick Start
Ventilation
Schedule
Filter Auto Clean
Return
Setting
Main menu screen
The main menu screen will appear.
Instructions for manipulating the

buttons will appear.
Selecting items from the main menu.
1. Press
buttons to select the desired
item to be set.
2. Press Menu/Enter button to display the
selected settings screen.
To go back to the basic screen from the main

menu screen, press the Cancel button.
Caution
While setting items, if a button is not pressed for 5 minutes, the screen will automatically go
back to the basic screen.
Operation manual
29
BRC1E52A7
4PW71265-1 10.2011
Individual Air Flow Direction

Individual setting
Operation Method
Main Menu
1/2
Air Flow Direction

Quick Start
Return
Display the main menu screen (see page 29).

Select Air Flow Direction in the main menu.
Press Menu/Enter button to display the Air Flow
Direction settings screen.
Setting
Main menu screen
Air Flow Direction

Individual Setting
Individual set all reset
Air direction range select
Return
Select Individual Setting in the menu.

Setting
Main menu screen
Individual Setting
Outlet
Unit A
Direction
No Ind Set
Outletmark
Return
Return
Setting
Main menu screen
Individual Setting
Outlet
UnitA
Direction
No Ind Set
Outletmark
Return
Return
Setting
Main screen
BRC1E52A7
4PW71265-1 10.2011
Use
buttons to select the unit and outlet
mark.
In case of SkyAir, maximum 4 units (unit
A, B, C, D).
In case of VRV, maximum 16 units for each group
(unit 0 till 15).
In case of cassette type, you can control each 4
flaps (, , , ) individually.
Press
button to select air flow direction setting.
Use
buttons to change the following settings:
No Ind Set Position 0 Position 1 Position 2
Position 3 Position 4 Swing Blocked .
No Ind Set : No Individual Setting.
Blocked : Individual air flow is blocked.
Operation manual
30
Menu Manipulation
Cool
Set to
Cool 28C
If individual air flow direction is set, then the

individual air flow direction icon is displayed in the
basic screen.
Basic screen

Operation Method
Return
Setting

UnitA
Outletmark
Air direc.
Indiv.
Auto
Auto
Auto
Auto
OFF
OFF
OFF
Return
Operation manual
31
Bring up the Air Flow Direction settings screen

(see page 30).
buttons to select
Press
Individual Setting List on the Air Flow Direction
screen.
Air Flow Direction

Individual Setting
Individual Setting List
Individual Set All Reset
OFF
A table shows the current settings. Press

buttons to go to the next unit.
Press Cancel button to go back to the main menu
screen.
Setting
BRC1E52A7
4PW71265-1 10.2011

Operation Method
Return
Bring up the Air Flow Direction settings screen

(see page 30).
Press
buttons to select
Individual set all reset on the Air Flow Direction
screen.
Air Flow Direction

Individual Setting
Individual Setting List
Individual Set All Reset
Setting
Press
buttons to select Yes on the
confirmation screen.
Press Menu/Enter button to confirm the reset and
go back to the main menu screen.

Clear individual
air flow setting?
Yes
Return
No
Setting
Quick Start (SkyAir only)

Quick Start On
Operation Method
Main Menu
1/2
Quick Start
Ventilation
Schedule
Filter Auto Clean
Return
Cool
Setting
Set to
Cool 28C
While operating in Cooling, Heating, or Auto mode,

display the main menu screen (see page 29).
Press
buttons to select Quick Start on the
main menu screen.
Press Menu/Enter button to return to the basic
screen.
Quick Start will appear on the basic screen.
Quick Start is now on.
Quick Start
BRC1E52A7
4PW71265-1 10.2011
Operation manual
32
Menu Manipulation
Quick Start Off
Operation Method
Main Menu
1/2
Quick Start
Ventilation
Schedule
Filter Auto Clean
Return
Cool
Setting
Set to
Cool 28C
While Quick Start is displayed on the basic screen,

display the main menu screen (see page 29).
Press
buttons to select Quick Start on the
main menu screen.
Press Menu/Enter button to return to the basic
screen.
Quick Start will no longer appear on the basic
screen.
Quick Start is now off.
Quick Start
Quick Start
The indoor unit is automatically controlled, increasing the power of the

outdoor unit and quickly bringing the room to a comfortable temperature.
Fan speed display goes off and fan speed can no longer be switched.
Cannot be set when in fan and dry modes.
Quick Start will run for a maximum of 30 minutes before the unit automatically returns to normal
operation.
Activating mode selector will return the air conditioner to normal operation.
In heating mode, fan speed may increase and the wind temperature may decrease.
Adjust the operation as desired.
Operation manual
33
BRC1E52A7
4PW71265-1 10.2011
Ventilation
Display method for ventilation settings screen
Operation Method
Main Menu
1/2
Quick Start
Ventilation
Schedule
Filter Auto Clean
Return
Setting
Ventilation
2/2
Ventilation rate
Ventilation mode
Return
Display the main menu screen.

(See page 29.)
Press
buttons to select Ventilation on the
main menu screen.
(For models with no ventilation function,
Ventilation will not be displayed on the main
menu screen.)
Press Menu/Enter button to display the ventilation
settings screen.
Setting
Changing the ventilation rate

Operation Method
Ventilation
2/2
Ventilation rate
Ventilation mode
Return
Setting
Bring up the ventilation settings screen (see

above).
Press
buttons to select Ventilation rate on
the ventilation settings screen.
rate settings screen.
Pressing
buttons changes the setting to in
order Low and High .
Ventilation
Ventilation rate
High
* Only modes that can be set are displayed.

Return
Low
Setting
High
3
BRC1E52A7
4PW71265-1 10.2011
Select the desired ventilation rate. Pressing Menu/

Enter button confirms the settings and takes you
(Pressing Cancel button takes you back to the
previous screen without changing the ventilation
rate.)
Operation manual
34
Menu Manipulation
Changing ventilation mode
Operation Method
Ventilation
2/2
Ventilation rate
Ventilation mode
Return
Setting
Ventilation
2/2
Ventilation mode
Bypass
Return
Display the ventilation settings screen.

(See page 34.)
Press
buttons to select Ventilation mode on
the ventilation settings screen.
mode settings screen.
Pressing
buttons changes the settings in
order as shown below.
Bypass
Energy Reclaim Vent
Automatic
Setting
* Only modes that can be set are displayed.
Cool
Set to
Cool 28C
Select the desired ventilation mode. Pressing

Menu/Enter button confirms the settings and takes
you back to the basic screen.
(Pressing the Cancel button takes you back to the
previous screen without changing the ventilation
mode.)
Ventilation Mode
Auto mode
Energy reclaim
ventilation mode
Bypass mode
Operation manual
35
Using information from the air conditioner (cooling, heating, fan,

and set temperature) and the total heat exchanger unit (indoor and
outdoor temperatures), mode is automatically changed between
Heat exchanger and Bypass.
Outside air undergoes Heat exchange and is supplied to inside the room.
Outside air is supplied to inside the room without undergoing heat exchange.
BRC1E52A7
4PW71265-1 10.2011

Display method for Energy Saving Options
Operation Method
Main Menu
1/2
Quick Start
Ventilation
Schedule
Filter Auto Clean
Return
Setting
1/2

(See page 29.)
Press
buttons to
select Energy Saving Options on the main menu
screen.
Press Menu/Enter button to display the Energy
Saving Options settings screen.
Energy Saving List

Setpoint range set
Set back condition
Sensing Sensor (low)
Sensing Sensor (stop)
Setpoint Auto Reset
Return
Setting
Energy Saving List

Operation Method
Return
Setting
Energy Saving List
2/2
Setpoint range set: OFF

Set back condition: ON
Sensing Sensor (low): OFF
Sensing Sensor (stop): OFF
Setpoint Auto Reset: ON
Off Timer: ON
Return
1/2
Energy Saving List

Setpoint range set
Set back condition
Setpoint Auto Reset
Setting
Energy Saving List

Save the settings?
Yes
Return
No
Bring up the Energy Saving Options settings

screen (see page 36).
Press
buttons to select
Energy Saving List on the Energy Saving Options
settings screen.
Press Menu/Enter button to display the Energy
Saving List settings screen.
Pressing
buttons changes the setting to in
order ON and OFF .
Move the cursor using
buttons.
Press Menu/Enter button after selecting the item.
The confirmation screen will appear.
Press
Setting
BRC1E52A7
4PW71265-1 10.2011
Operation manual
36
Menu Manipulation
Setpoint Range Setting
Operation Method
Return
Setting
Setpoint Range Set

Cool
Heat
20C 35C
15C 30C
Return
Setting
Setpoint Range Set

Save the settings?
Yes
Return
No
2/2

Press
buttons to select Setpoint range set
on the Energy Saving Options settings screen.
Press Menu/Enter button to display the Setpoint
Range Limitation settings screen.
Pressing
buttons changes the temp. setting
range of cooling and heating.
buttons.
Press
Setting
Operation manual
37
2/2
1/2
Energy Saving List

Setpoint range set
Set back condition
Setpoint Auto Reset
BRC1E52A7
4PW71265-1 10.2011
Set back condition

Operation Method

Energy Saving List
Setpoint range set
Set back condition
Setpoint Auto Reset
Return
Setting
Set back condition

Recovery Differential
Cool
-2C
Heat
+2C
Return
Setting
Set back Condition

Save the settings?
Yes
Return
No
2/2
1/2

Press
buttons to select Set back condition
Press Menu/Enter button to display the Set back
condition settings screen.
Pressing
buttons changes the temperature
differential of the complete Setback.
buttons.
Press
Setting
BRC1E52A7
4PW71265-1 10.2011
Operation manual
38
Menu Manipulation
Operation Method
Return
Setting

Adjust temp. cool: 1.0C
Adjust time cool: 30 min
Limit cool temp.: 30C
Adjust temp. heat: 1.0C
Adjust time heat: 60 min
Limit heat temp.: 15C
Return
Setting

Save the settings?
Yes
Return
No

Press
buttons to select Sensing Sensor (low)
Press Menu/Enter button to display the Sensor
Setting (low) settings screen.
Pressing
buttons sets the saving energy
operation when the sensor detects the absence.
buttons.
Press
Setting
Operation manual
39
2/2
1/2
Energy Saving List

Setpoint range set
Set back condition
Setpoint Auto Reset
BRC1E52A7
4PW71265-1 10.2011

Operation Method
Return
Setting
Sensing Sensor (Stop)
2/2
Absent stop on/off: OFF

Absent stop set time: 10 hours
Return
2/2
1/2
Energy Saving List

Setpoint range set
Set back condition
Setpoint Auto Reset
Setting

Save the settings?
Yes
Return
No

Press
buttons to
select Sensing Sensor (stop) on the Energy
Saving Options settings screen.
Press Menu/Enter button to display the Sensor
Setting (stop) settings screen.
Pressing
buttons sets the saving energy
operation when the sensor detects the absence.
buttons.
Press
Setting
BRC1E52A7
4PW71265-1 10.2011
Operation manual
40
Menu Manipulation
Setpoint Auto Reset
Operation Method
Return
Setting
Setpoint Auto Reset

Cool
Heat
Set temp.: 20C

Set time: 90 min
Setting
Setpoint Auto Reset

Save the settings?
Yes
Return
No

Press
buttons to select Setpoint Auto Reset
Press Menu/Enter button to display the Setpoint
Auto Reset settings screen.
Press
buttons to set preset temperature and
timing for the auto reset of the setpoint.
buttons.
Press
Setting
Operation manual
41
2/2
Set temp.: 28 C
Set time: 60 min
Return
2/2
1/2
Energy Saving List

Setpoint range set
Set back condition
Setpoint Auto Reset
BRC1E52A7
4PW71265-1 10.2011
Off Timer
Operation Method

Off Timer
Electricity consumption
Return
Setting
Off Timer
After you turn on the unit,
it will automatically
turn off in
60
minutes.
Return
Setting
Off Timer
Save the settings?
Yes
Return
No
2/2

screen. (See page 36.)
Press
buttons to select the Off Timer on the
Energy Saving options settings screen.Press
Menu/Enter button to display the Off Timer screen.
Use
buttons to set the time from operation
start until the unit automatically stops.
Selections can be made in increments of
10 minutes from 30 to 180 minutes.
Holding down the button causes the number to
change continuously.
Select the desired time and press Menu/Enter
button.
The settings confirmation screen will appear.
Press
button to select Yes on the settings
Pressing Menu/Enter button confirms the Off Timer
settings and takes you back to the basic screen.
Setting
BRC1E52A7
4PW71265-1 10.2011
Operation manual
42
Menu Manipulation
Operation Method
Setting
Return
2/2
2/2
Off Timer
Today
1
kWh
Return
Total
10.5 kWh
12
18
24
This week
10
kWh
Total
60.2 kWh

Press
buttons to select
Electricity consumption on the Energy Saving
Options settings screen.
Press Menu/Enter button to display the Electricity
consumption settings screen.
Move the indicating screen using
buttons.
Today > Yesterday > This week (1 week) > Last
week (1 week) > This year (1 year) > Last year
Change the items and values located in the upper
right of the indication area using
buttons.
Press cancel button to return to the previous
screen.
S M T W T F S
Return
This year
1
kWh
Return
Operation manual
43
Total
150 kWh
12
BRC1E52A7
4PW71265-1 10.2011
Schedule
Display method for schedule settings screen
Operation Method
Main Menu
1/2
Quick Start
Ventilation
Schedule
Filter Auto Clean
Setting
Return
The schedule can not be enabled when a centralized controller is connected.
Schedule
Clock has not been set.
Would you like to set it now?
Yes
Return
No
Setting
Date & Time

Year 2011
Month 01
Day
01
Tuesday

(See page 29.)
Press
buttons to select Schedule .
Press Menu/Enter button to display the schedule
settings screen.
Before setting the schedule, the clock must be set.
If the clock has not been set, a screen like the one
on the left will appear.
Press
buttons to select Yes and press
Menu/Enter button.
The date & time screen will appear.
Set the current year, month, day, and time. (See
"Clock & Calendar" on page 57.)
12:00
Return
Setting
Schedule
Enable/Disable
Schedule nr set
Holidays
Settings
Return
Press
buttons to select the desired function
on the schedule settings screen and press Menu/
Enter button.
Setting
BRC1E52A7
4PW71265-1 10.2011
Operation manual
44
Menu Manipulation
Schedule Number Set
Operation Method
Schedule
Return
2/2
Enable/Disable
Schedule nr set
Holidays
Settings
Setting
Press
Schedule
Schedule nr set
Schedule nr 1
Return
Bring up the schedule settings screen. (See

page 47.)
Press
buttons to select Schedule nr set on
the schedule settings screen.
The Schedule Number Set screen will appear
when the Menu/Enter button is pressed.
Setting
buttons to
select Schedule nr 1 , Schedule nr 2 ,

or Schedule nr 3 on the Schedule number set
screen.
The confirmation screen will appear when the
Menu/Enter button is pressed.
Save the settings?
Yes
Return
Operation manual
45
Press
Schedule
No
Setting
Pressing the Menu/Enter button confirms the daily

patterns in the schedule and takes you back to the
basic screen.
BRC1E52A7
4PW71265-1 10.2011
Holidays
(The schedule timer will be disabled for days that have been set as holiday.)
Operation Method
Enable/Disable
Schedule nr set
Holidays
Settings
Return
Setting
Schedule
Holiday setting
Multiple selection
Sun Mon Tue Wed Thu Fri Sat
Return
Setting
Schedule
Holidays
Multiple selection
Sun Mon Tue Wed Thu Fri Sat
Return

page 44.)
Press
buttons to select Holidays on the
schedule settings screen.
Press Menu/Enter button to display the holiday
settings screen.
Schedule
Press
button to select Yes on the settings
Pressing Menu/Enter button confirms the holiday
settings and takes you back to the basic screen.
Save the settings?
Yes
Return
No
Setting
Schedule
Holiday
Time
:
:
:
:
:
Return
To complete the holiday settings, press Menu/

Enter button.
The settings confirmation screen will appear.
Setting
Schedule
Mon
Press
buttons to select the desired day.
Press
buttons to display " " to make the
holiday settings.
buttons switches the setting
Pressing
between set and release.
Multiple days can be selected as holidays.
Note: To able the schedule timer for the day
selected as a holiday, the holiday setting
must be released.
Act
Cool
Heat
Setting
BRC1E52A7
4PW71265-1 10.2011
Note:
Holiday that are set will be displayed on the
schedule settings screen.
Operation manual
46
Menu Manipulation
Schedule Settings
Operation Method
Schedule
2/2
Enable/Disable
Schedule nr set
Holidays
Settings
Return
Setting

page 44.)
Press
buttons to select Settings on the
schedule screen.
The settings screen will appear when the Menu/
Enter button is pressed.
NOTE: The Schedule Settings of the selected
schedule number can be modified. To modify the
schedule number see "Schedule Number Set" on
page 45.
Schedule
Mon
Time
:
:
:
:
:
Act
Return
Cool
Heat
Cool
Heat
Cool
Heat
Cool
Heat
Cool
32C
Heat
16C
Setting
Schedule
Mon
Time
6 :00
:
:
:
:
Act
Return
Setting
Press
buttons to select the day to be set.
Input the time for the selected day.

Press
buttons to move the highlighted item
and press
buttons to input the desired
operation start time. Each press of
buttons
moves the numbers by 1 hour or 1 minute.
Schedule
Mon
Time
6 :00
:
:
:
:
Act
Return
Setting
Schedule
Mon
Time
6 :00
:
:
:
:
Act
Return
Setting
Schedule
Mon
Time
6 :00
:
:
:
:
Act
ON
Return
Operation manual
47
Setting
Press the
buttons to move the highlighted
item and press
buttons to configure ON/
OFF/-- settings.
--, ON, or OFF changes in sequence when
buttons are pressed.
"Act"-column:
ON: The temperature setpoints can be configured.
OFF: The setback temperature setpoints can be
configured.
: The temperature setpoints and setback
temperature setpoints become disabled.
BRC1E52A7
4PW71265-1 10.2011
Schedule
Mon
Time
6 :00
8 :00
:
:
:
Act
ON
OFF
Return
Cool
Heat
24C 21C
C
Setting
Schedule
Mon
Time
6 :00
8 :00
1 7 :30
2 2 :00
:
Act
ON
OFF
ON
Return
Cool
24C
29C
24C
Heat
21C
10C
21C
Setting
Schedule
Mon
Time
6 :00
8 :00
1 7 :30
2 2 :00
:
Act
ON
OFF
ON
OFF
Return
Cool
24C
29C
24C
28C
Heat
21C
10C
21C
17C
Cool
24C
29C
24C
28C
Heat
21C
10C
21C
17C
Setting
The cooling and heating temperature setpoints for

both ON and OFF (Setback) are configured.
"Cool"- and "Heat"-column:
"_": Indicates that the temperature setpoint and
setback temperature setpoint for this time
period is not specified. The last active
setpoint will be utilized.
"--": Indicates that the setback function is
disabled for this time period.
A maximum of 5 actions per day can be

set.
Press the Menu/Enter button when settings for

each day are completed. The confirmation screen
will appear.
To copy the settings for the previous day, press the
operation mode selector button so that the existing
settings will be copied.
Example: The contents for Monday are copied by
pressing the operation mode selector button after
selecting Tuesday.
Schedule
Tue
Time
6 :00
8 :00
1 7 :30
2 2 :00
:
Act
ON
OFF
ON
OFF
Return
Setting
Schedule
Save the settings?
Yes
Return
No
Setting
BRC1E52A7
4PW71265-1 10.2011
Press
buttons to select "Yes" on the
Pressing the Menu/Enter button confirms the
settings for each day and takes you back to the
main menu screen.
Operation manual
48
Menu Manipulation
Enabling or disabling the schedule
Operation Method
Schedule
Return
2/2
Enable/Disable
Schedule nr set
Holidays
Settings
Setting
Schedule
Enable/Disable
Disable
Return
Display the schedule settings screen.

(See page 44.)
Press
buttons to select Enable/Disable on
the schedule settings screen.
Press Menu/Enter button to display the enable/
disable screen.
Press
buttons to select Enable or Disable
on the enable/disable screen.
Setting
NOTE: The Schedule number selected is enabled.

To modify the schedule number see "Schedule
Number Set" on page 45.
Schedule
Save the settings?
Yes
Return
Operation manual
49
No
Setting
Press
Pressing Menu/Enter button confirms the enable/
disable setting for the schedule and takes you
BRC1E52A7
4PW71265-1 10.2011
Filter Auto Clean

Operation Method
Main Menu
Return
1/2
Quick Start
Ventilation
Schedule
Filter Auto Clean
Setting
Filter Auto Clean

Filter Auto Clean
0:00 - 3:00
Return
Setting
BRC1E52A7
4PW71265-1 10.2011

(See page 29.)
Press
buttons to select Filter Auto Clean on
the main menu screen and press Menu/Enter
button.
Filter Auto Clean setting can be executed.

This function is available only on the model whose
panel has automatic cleaning function of filter.
For detailed operation refer to the operation
manual of these models.
Operation manual
50
Menu Manipulation
Display method for maintenance information
Operation Method
Main Menu
Return
1/2
Quick Start
Ventilation
Schedule
Filter Auto Clean
Setting
Contact info
01234567890
Indoor unit
Outdoor unit
Return
/000
/000

(See page 29.)
Press
buttons to select
Maintenance Information on the main menu
screen and press Menu/Enter button.
The phone number for the contact address will

appear at the top of the screen.
(If you have not yet registered your product, it will
not appear.)
The model information of the indoor and outdoor
units of your product will appear on the bottom of
the screen.
(For some models the product code may appear.)
* The model name will not appear if you have had
the circuit board replaced.
* The error code record may also appear.
If it is not blinking, the unit is working properly.
The error code record will disappear if you press
On/Off button for more than 4 seconds.
Operation manual
51
BRC1E52A7
4PW71265-1 10.2011
Configuration
Display method for configuration settings screen
Operation Method
Main Menu
2/2
Configuration
Current Settings
Clock & Calendar
Language
Return
Setting

(See page 29.)
Press
buttons to select Configuration on the
main menu screen.
Press Menu/Enter button to display the
Configuration settings screen.
Draft prevention
Operation Method
Configuration
Draft prevention
Display
Contrast Adjustment
Return
Setting
Draft prevention
Enable/Disable
Disable
Return
Press
buttons to select Enable or Disable
on the enable/disable screen.
Setting
Draft prevention
Save the settings?
Yes
Return
Bring up the Configuration settings screen. (See

above.)
Press
buttons to select Draft prevention on
the Configuration settings screen.
Press Menu/Enter button to display the Draft
prevention settings screen.
No
Setting
BRC1E52A7
4PW71265-1 10.2011
Press
Pressing Menu/Enter button confirms the enable/
disable setting for the draft prevention and takes
you back to the basic screen.
Operation manual
52
Menu Manipulation
Display
Display Mode
Operation Method
Draft prevention
Display
Contrast Adjustment
Return
Setting
Display
Display Mode
Display Item
Return
Standard
None
Press
buttons to select Display Mode on the
Display settings screen.
Press Menu/Enter button to display the Display
Mode settings screen.
Setting
Display
Display Mode
Standard
Return
Operation manual
53

above.)
Press
buttons to select Display on the
Configuration settings screen.
settings screen.
Configuration
Setting
Press
buttons to select Standard
or Detailed on the Display Mode settings screen.
Then, press Menu/Enter button to confirm settings
and return to the basic screen.
* Refer to Setting the detailed display item
selection to change detailed display selection.
(See below.)
BRC1E52A7
4PW71265-1 10.2011
Setting the detailed display item selection

Operation Method
Display
Display Mode
Display Item
Return
Standard
None
Setting
Pressing
Display
Display Item
None
Return
Bring up the Display settings screen. (See

page 53.)
Press
buttons to select Display Item on the
Display settings screen.
Item settings screen.
Setting
None
buttons displays the following.
* Outside Air Temp
* System
Room Temp
* Some models may not display these items even if they are selected.
Be sure to read the following notes regarding display of room
temperature and outdoor temperature.
Room Temp
.............. An estimate of the temperature near the remote
controller.
The temperature that is detected may be
affected by the location of the unit.
Outside Air Temp
.............. An estimate of the temperature near the
outdoor unit.
The temperature that is detected may be
affected by factors such as the location of the
unit (if it is in direct sunlight, for e.g.) and unit
operation during defrosting.
After setting, press Menu/Enter button to confirm
settings and return to the basic screen.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
54
Menu Manipulation
Contrast Adjustment
Operation Method
Configuration
Draft prevention
Display
Contrast adjustment
Return
Setting
Contrast adjustment
Dark
Light
Return
Operation manual
55

page 52.)
Press
buttons to select Contrast adjustment
on the Configuration settings screen.
Press Menu/Enter button to display the Contrast
adjustment settings screen.
On the Contrast adjustment settings screen press

buttons until you reach the desired contrast.
After setting, press Menu/Enter button and return
to the basic screen.
Setting
BRC1E52A7
4PW71265-1 10.2011
Current Settings
Manipulating the current settings
Operation Method
Main Menu
Return
2/2
Configuration
Current Settings
Clock & Calendar
Language
Setting
Current Settings
Ventilation rate
Ventilation mode
Schedule
Display Mode
Display Item
Filter auto clean
Return
Low
Auto
Disable
Standard
Outside
00-03
Setting

(See page 29.)
Press
buttons to select Current Settings on
the main menu screen and press Menu/Enter
button.
A list showing the current setting status will

appear.
Press
buttons to go to the next item.
Pressing Cancel button takes you back to the main
menu screen.
Display items
Ventilation rate
Ventilation mode
Schedule
Quick Start
Display Mode
Display Item
Filter auto clean
* Display items may differ depending on the model.

Only the items that can be set are displayed.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
56
Menu Manipulation
Clock & Calendar
Display method for Clock & Calendar settings screen
Operation Method
Main Menu
2/2
Configuration
Current Settings
Clock & Calendar
Language
Return
Setting
Display the main menu screen. (See page 29.)

Press
buttons to select Clock & Calendar on
the main menu screen.
Press Menu/Enter button to display the Clock &
Calendar settings screen.
Date & time

Operation Method
Clock & Calendar

Date & Time
12H/24H Clock
Return
Setting
Select "Year" with

buttons.
Change the year with
buttons.
Date & Time

Year 2011
Month 01
Day
01
Thursday
12:00
Return
Setting
Select "Month" with

buttons.
Change the month with
buttons.
Date & Time

Year 2011
Month 10
Day
01
Thursday
12:00
Return
Operation manual
57
Bring up the Clock & Calendar settings screen. (See

page 57.)
buttons to select Date & Time on the
Press
Clock & Calendar settings screen.
Press Menu/Enter button to display the Date &
Time settings screen.
Setting
BRC1E52A7
4PW71265-1 10.2011
Date & Time

Year 2011
Month 10
Day
07
Thursday
12:00
Return
Setting
Select "Hour" with

buttons.
Change the hour with
buttons.
Date & Time

Year 2011
Month 10
Day
07
Thursday
12:00
Return
Select "Day" with

buttons.
Change the day with
buttons.
Days of the week change automatically.
Setting
Date & Time

Year 2011
Month 10
Day
07
Thursday
12:21
Return
Setting
Select "Minute" with

buttons.
Change the minute with
buttons.
Caution
Daylight Saving Time
Caution: The following period has
adopted Daylight Saving Timer.
[Start] Last Sunday,
March 2:00
[End] Last Sunday,
October 3:00
Please consult your Daikin
dealer to change the setup.
Date & Time

Save the settings?
Yes
Return
No
Setting
BRC1E52A7
4PW71265-1 10.2011
Press
button to select Yes on the
Press Menu/Enter button to confirm the clock and
return to the basic screen.
* When setting the schedule, the display returns to
the settings screen.
Operation manual
58
Menu Manipulation
12H/24H CLOCK
Operation Method
Clock & Calendar

Date & Time
12H/24H Clock
Return
Setting
12H/24H Clock
24H
Return
Setting
12H/24H Clock
Save the settings?
Yes
Return
Operation manual
59
No
Setting
Display the Clock & Calendar settings screen.

(See page 57.)
Press
buttons to select 12H/24H Clock on
the Clock & Calendar settings screen.
The 12H/24H Clock settings screen will appear
when the Menu/Enter button is pressed.
By default, the time display is set to the

24H format.
Press
buttons to select 12H 24H on the
12H/24H Clock settings screen.
The confirmation screen will appear when the
Menu/Enter button is pressed.
Press
Pressing the Menu/Enter button confirms the 12H
or 24H and takes you back to the main menu
screen.
BRC1E52A7
4PW71265-1 10.2011
Language
Selectable languages
Operation Method
Main Menu
Return
2/2
Configuration
Current Settings
Clock & Calendar
Language
Press
buttons to select Language on the
main menu screen and press the Menu/Enter
button.
Setting
Language
English
Return
Display the main menu screen. (See page 29.)
Setting
BRC1E52A7
4PW71265-1 10.2011
Press
buttons to select "Language" on the
language screen.
English/Deutsch/Franais/Espaol/Italiano/
E/Nederlands/Portugues/Pycc/rke/
Polski
Pressing Menu/Enter button to confirm settings
and return to the basic screen.
Operation manual
60
Maintenance
Filter Sign Resetting
Operation Method
When the time to clean the filter or element has come, one of the
Cool
Set to
Cool 28C
Return
Time
to clean filterSetting
following messages will appear on the bottom of the basic screen.

"Time to clean filter"
"Time to clean filter & element"
"Time to clean element"
Wash, clean, or replace the filter or element.
For details, refer to the operation manual of the
indoor unit.
2
3
Reset the filter sign when the filter or element is

washed, cleaned, or replaced.
The main menu screen will appear.
Main Menu
1/2
Quick Start
Schedule
Reset Filter Indicator
Ventilation
Return
Cool
Press
buttons to select Reset Filter Indicator
on the main menu screen and press Menu/Enter
button.
Setting
Set to
Cool 28C
The message shown in Step 1 will disappear from

the basic screen when the filter sign is reset.
Operation manual
61
BRC1E52A7
4PW71265-1 10.2011
Caution
Do not wash the remote
controller.
Doing so may cause electric
leakage and result in electric shocks
or fire.
Be sure to stop the operation of

the air conditioner and turn off
the power supply breaker at the
time of maintenance.
Failure to do so may result in
electric shocks or injury.
Maintenance of Unit and LCD

Wipe the LCD and other surface part of the remote controller with a dry cloth when they become
dirty.
If the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with
water, squeeze the cloth tightly, and clean the surface. Wipe the surface with a dry cloth then.
Note
Do not use any paint thinner, organic solvent, or strong acid.
Warning
Do not use flammable materials (e.g., hairspray or insecticide) near the air
conditioner.
Do not clean the product with organic solvents such as benzine or paint
thinner.
The use of organic solvents may cause crack damage to the product, electric shocks,
or fire.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
62
Useful Information
Error code Display
Contact your Daikin dealer in the following cases
Warning
When the air conditioner is malfunctioning (e.g., giving off a burning odor),
stop the air conditioner and turn off power.
Continued operation under such circumstances may result in failure, electric shocks, or fire.
Contact your Daikin dealer.
Operation Method
Cool
Set to
Cool 28C
Return
Setting
Error : Push Menu
Button
If an error occurs, either one of the following items will

blink in the basic screen.
Operation
lamp
"Error: Push Menu Button."

* The operation indicator will blink.
"Warning: Push Menu Button."
* The operation indicator will not blink.
Error code:A1
Contact Info
012345678900
Indoor unit
Outdoor unit
/000
/000
The error code blinks and the contact address and

model name will appear.
Notify your Daikin dealer of the Error code and
Model name.
Return
Operation manual
63
BRC1E52A7
4PW71265-1 10.2011
After-sale Service
Warning
Do not disassemble, modify, or
repair the unit.
Doing so may result in electric
shocks or fire.
Do not relocate or reinstall the

remote controller by yourself.
Improper installation may result in
electric shocks or fire.
Advise the repairer of the following items
Model name
Date of installation
Failure conditions: As precise as possible.
Your address, name, and telephone number
Relocation
The relocation of the remote controller requires special technology. Consult your Daikin dealer.
Actual expenses required for the relocation of the remote controller will be charged.
Repairs after Warranty Period

Fair-paying services may be possible at the request of the customer.
(The warranty period is 1 year counting from the date of installation.)
Inquiry about After-sale Service

Contact your Daikin dealer.
BRC1E52A7
4PW71265-1 10.2011
Operation manual
64
4PW71265-1 10.2011
Copyright 2011 Daikin

Daikin HVAC Operation+Manual

Uploaded by

Copyright:

Available Formats

Daikin HVAC Operation+Manual

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Daikin HVAC Operation+Manual

Uploaded by

Copyright:

Available Formats

WIRED REMOTE

Proper Use for Effective Energy Saving

Read this manual carefully and be sure you understand the

Safety Precautions ................................................... 2

Simple settings in Direct

Cool/Heat/Auto/Fan Operation ............................... 13

Main Menu Items .................................................... 25

Manipulating the Main Menu Screen ...................... 29

Filter Sign Resetting ............................................... 61

Error code Display .................................................. 63

Failure to follow these instructions properly may result in personal

Failure to observe these instructions properly may result in property

The following pictograms are used in this manual.

Always follow the instructions given.

Be sure to ground the unit.

Absolutely keep wet hands away.

Absolutely keep water and moisture

About Remote Controller

Do not modify or repair the remote controller.

Do not relocate or reinstall the remote controller by yourself.

Do not use flammable materials (e.g., hairspray or insecticide) near the

Items to be Strictly Observed

Never disassemble the remote controller.

Touching the interior parts may result in electric shocks or fire.

To avoid electric shocks, do not operate with wet hands.

Do not leave the remote controller wherever there is a risk of wetting.

Indoor Unit and Outdoor Unit

Contact professional personnel about attachment of accessories and be

Beware of fire in case of refrigerant leakage.

Otherwise, fire or water leakage may result.

Be sure to earth the unit.

Consult your local dealer regarding what to do in case of refrigerant

Be sure to install an earth leakage breaker.

Consult the dealer if the air conditioner submerges owing to a natural

Be sure to use a dedicated power supply for the air conditioner.

Items to be Strictly Observed

Do not block air inlets nor outlets.

Impaired air flow may result in insufficient performance or trouble.

Do not place objects that are susceptible to moisture directly beneath

Do not place appliances that produce naked flames in places exposed to

Do not sit or stand on any unstable base at the time of operating or

The motor in operation is at high temperatures and a burn may result.

Fix the units securely.

Arrange the drain to ensure complete drainage.

Names and Functions

1. Operation mode selector button

2. Fan speed/Airflow direction

4. Up button (Be sure to press the

5. Down button (Be sure to press

7. Left button (Be sure to press

9. Operation lamp (Green)

11. LCD (with backlight)

Used to lower the set temperature.

6. Right button (Be sure to press

Names and Functions

10.Changeover under control

This function not available

<Standard display example>

The airflow direction, clock, and detailed selection items appear

(Displayed only when