Marex OS II GB 883 890 026 3 Low Dpi
Marex OS II GB 883 890 026 3 Low Dpi
Marex OS II GB 883 890 026 3 Low Dpi
Hydraulics
Electric Drives
and Controls
Pneumatics
Service
Automation
Mobile
Hydraulics
Marex OS II
Open for every challenge.
At home in all the seas of the world
The open system for propulsion control
We supply to Original
Equipment Manufacturers:
Marex OS II a system
suitable for all possibilities.
Marex OS II replaces the elaborate
remote controls that are typically
custom designed for each specific
vessel. In the case of Marex OS II,
the control hardware is implemented with a few modular
components. Signals and data are
transmitted via CAN bus. With
the corresponding software and
parameter adjustments it can be
adapted perfectly to almost every
kind of propulsion system.
For our customers this means
reduced planning and projecting
costs. Additionally, the intelligent
Marex OS II software facilitates the
commissioning and provides new
methods of failure diagnosis, for
example by remote data transmission. Thanks to this technology,
we can offer remote controls that
are suitable for every type of ship.
For our customers this means free
choice of propulsion configuration.
Engines:
B & W, Caterpillar, Cummins,
Deutz, MaK, MAN, MTU, Scania,
Sulzer, Wrtsil, Volvo-Penta, ...
Gear drives:
L & S, Reintjes, Twin Disk, ZF, ...
Controllable pitch propellers:
Berg, Hundested, Lips, Piening, ...
Waterjets:
FF-Yet, Hamilton, Lips, ...
Shipyards:
New ships, retrofits, repair of sea
and inland vessels, yachts, work
boats, fishing boats, ferries and
passenger ships, ...
Associations:
Deutsche Gesellschaft zur Rettung
Schiffbrchiger (DGzRS, German
Association for the Rescue of
Shipwrecked Persons), Lotsenbetriebsverein (German pilot association), ...
Authorities:
Fire Brigade, Fishing Authority,
Coast Guard, Police, Wasser-Schifffahrtsamt (WSA, German authority for shipping), WasserstraenMaschinenamt (WMA, German
authority for waterways and engines), Customs Duty, ...
End users:
Ship and yacht owners, ...
Navy:
Germany, Finland, France, Croatia,
Norway, Poland, Sweden, ...
Marex OS II
Where Quality Is Launched
We layout and equip ...
We perform the layout of
the circuits of our electronic
components.
We can thus maintain the knowhow, control the quality and provide rapid flexibility for further
developments.
Marex OS II
The System For The Future
Plotter
v
p
Positioning
System
Follow up
System
Safety System
of main Engine
Control Head
(standard)
Actuator
Compact Desgin
Diagnosis
via Telecom
Relay
Outputs
Display
Monitoring
Current Outputs
Display
Remote Control
I,U,R
CAN-BUS
Digital
Inputs
Analogue Inputs
Panel
CAN-BUS
Application
Software
Processor
Marex OS II stands
for Open System.
Thanks to its modular design, the
remote control can be adapted
individually to the respective propulsion system. At the same time,
safety, monitoring and other external systems can be connected easily
by means of serial signal and data
transmission via the CAN bus and
interface modules.
All bus participants are monitored cyclically by the integrated self-test system.
The data processing of the system is distributed. This means,
data of subsystems such as lever
follow-up or monitoring are
processed by their own
independent CPU.
The data of all input and output
signals to the peripheral equipment is transferred via I/Omodules.
Marex OS II
Tested For Seaworthiness
Endurance test
It is a real marathon of one million
actuations the control head must
stand during this test. The moving
mechanical parts such as lever
bearings, gear-wheels, brakes and
others are subject to extremely
high stresses during this test. Wellchosen materials and first-class
quality make sure that the Marex
OS II can withstand this constant
operation.
High-voltage test
The resistance of the Marex OS II
to high voltage is tested by connecting a voltage of 548 V/50 Hz
between terminals and ground and
between the terminals themselves.
Terminals with the same potential
are bridged. The safety circuits of
the Marex OS II will protect even
sensitive parts against overload.
Vibration test
The resistance of the Marex OS II
against ship vibrations is examined
in this test. The conditions correspond to a high vibrational strain
of 2 - 25 Hz at an amplitude of
1.6 mm resp. of 25 - 100 Hz
with an acceleration of 4.0 g. The
test is made in the main planes
with functional tests during the
test procedure.
Temperature
From - 25 C to + 70 C (- 13 F to
+ 158 F) is the range for the temperature tests. Functional tests in
cold environment as well as in
dry and humid heat confirm the
suitability of the Marex OS II for
open decks or applications with
frequent temperature variations.
EMC-test
An antenna radiates vertically and
horizontally an electromagnetic
field on the device to be tested.
The perfect function of the control
must be guaranteed. This procedure is especially important
because the screening against electromagnetic interference is examined.
Marex OS II
Technical Part
Applications
With slight hardware variations and
selection of the corresponding software, the Marex OS II can be used
for remote controls and monitoring
of propulsion plants with reversing
gear, controllable pitch propeller
and Voith-Schneider propellers.
For systems with controllable pitch
propellers and Voith-Schneider
propellers, load control is part of
the Marex OS II hard- and software.
For reversing gear control systems
auxiliary functions such as speed
synchronizing in case of multipleengine systems, trolling resp. modulation (controlled clutch slip) and
shaft brake are part of the Marex
OS II hard- and software.
Type 230
Type 240
Type 250
For safe command transfer and
comfortable maneuvering with
multiple control stations, a lever
follow-up system is available.
By means of the auxiliary module
Marex GS - GS for global service - remote data transmission
between the vessel and the service
station is realized. Marex GS allows
service support at a low cost due
to a fast and precise analysis of
possible disturbances of the propulsion system and their elimination.
MPC modular
Index
Control head and operating components
Control head type 230
type 231
type 242
Actuator
Electro-pneumatic converter
3/2-way-solenoid valve
Index
Accessories
Accessories sub-D
Accessories M12
Accessories adapter
Type numbers standard version (scale and lever grey, handle and ring black)
For application
(fig.)
Reversing gear propulsion system
fig. 1
Scale colour
ahead / neutral / astern
green / yellow / red
Detents in
position
0, I, III
Number of
engines / levers
1
2
1
2
- / yellow / red
0, I
1
2
Lever
follow-up
without
with
without
with
without
with
without
with
without
with
without
with
Weight
[kg]
3.1
3.8
3.4
4.3
3.1
3.8
3.4
4.3
3.1
3.8
3.4
4.3
Lever
follow-up
without
with
without
with
without
with
without
with
without
with
without
with
Weight
[kg]
3.1
3.8
3.4
4.3
3.1
3.8
3.4
4.3
3.1
3.8
3.4
4.3
Type number
362 230 000 0
362 230 050 0
362 230 100 0
362 230 150 0
362 230 200 0
362 230 250 0
362 230 300 0
362 230 350 0
362 230 400 0
362 230 450 0
362 230 500 0
362 230 550 0
Type numbers black version (scale, lever, handle and ring black)
For application
(fig.)
Reversing gear propulsion system
Fig. 1
Scale colour
ahead / neutral / astern
green / yellow / red
Detents in
position
0, I, III
Number of
engines / levers
1
2
1
2
- / yellow / red
0, I
1
2
Type number
362 230 001 0
362 230 051 0
362 230 101 0
362 230 151 0
362 230 201 0 *
362 230 251 0
362 230 301 0
362 230 351 0 *
362 230 401 0 *
362 230 451 0 *
362 230 501 0 *
362 230 551 0 *
*on request
Type numbers black / chrome version (scale and handle black, lever and ring chromed)
For application
(fig.)
Reversing gear propulsion system
Fig. 1
Scale colour
ahead / neutral / astern
green / yellow / red
Detents in
position
0, I, III
Number of
engines / levers
1
2
1
2
- / yellow / red
0, I
1
2
*on request
Lever
follow-up
without
with
without
with
without
with
without
with
without
with
without
with
Weight
[kg]
3.1
3.8
3.4
4.3
3.1
3.8
3.4
4.3
3.1
3.8
3.4
4.3
Type number
362 230 002 0
362 230 052 0 *
362 230 102 0
362 230 152 0 *
362 230 202 0 *
362 230 252 0 *
362 230 302 0 *
362 230 352 0 *
362 230 402 0 *
362 230 452 0 *
362 230 502 0 *
362 230 552 0 *
Scale colour
ahead / neutral / astern
green / yellow / red
Detents in
position
0, I, III
Number of
engines / levers
1
2
1
2
- / yellow / red
0, I
1
2
Lever
follow-up
without
with
without
with
without
with
without
with
without
with
without
with
Weight
[kg]
3.1
3.8
3.4
4.3
3.1
3.8
3.4
4.3
3.1
3.8
3.4
4.3
Type number
362 230 003 0 *
362 230 053 0 *
362 230 103 0 *
362 230 153 0 *
362 230 203 0 *
362 230 253 0
362 230 303 0 *
362 230 353 0 *
362 230 403 0 *
362 230 453 0 *
362 230 503 0 *
362 230 553 0 *
*on request
Spare parts
Device
Main board
electronic board*
Mechanical spare parts
break-unit, lever, handle
Electronic spare parts
potentiometer
* Software version and version of printed circuit board are needed
Description
Type number
on request
on request
on request
Technical drawing
fig. 1
fig. 2
Connecting diagram
Bottom view of twin control head
Type numbers
For application
Special
Number of
engines / levers
1
Lever
2
scale points
1
2
combinator
only rpm
(blocked in astern)
separate rpm / pitch
only pitch
1
2
1
2
1 engine / 2 levers
2
standard
short
standard
short
standard
short
standard
short
standard
standard
standard
standard
standard
standard
Weight
[kg]
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
Type number
362 240 160 0
on request
362 240 060 0
on request
on request
on request
362 240 032 0
362 240 031 0
R417 000 368
R417 000 372
R417 000 366
R417 000 374
R417 000 370
R417 000 376
Functions
Type number
362 240 160 0
362 240 060 0
362 240 032 0
362 240 031 0
R417 000 368
station transfer
station transfer, rpm constant
rpm-constant
clutch on/off
combinator on/off
clutch on/off
clutch 1 on/off
clutch 2 on/off
synchronization or trolling
clutch on/off
Indication 3 for
command active, synchronization, trolling,
alarm
command active, synchronization, trolling,
alarm
command active, clutch on, rpm constant,
alarm
command active, rpm constant, alarm
command active, clutch on, rpm constant,
alarm
command active, combinator on, rpm
constant, alarm
command active, clutch on, rpm constant,
alarm
command active, clutch 1 on, clutch 2 on,
alarm
Figure
1
2
3
4
5
6
7
8
Spare parts
Device
Spare parts
Description
Type number
on request
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
1)
2)
3)
Terminal assignment
Type numbers
For application
Special
combinator
only rpm
(blocked in backward)
separate rpm / pitch
only pitch
Number of
engines / levers
1
2
1
2
1
2
1 engine / 2 levers
2
Weight
[kg]
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
Type number
R417 000 357
R417 000 356
R417 000 369
R417 000 373
R417 000 367
R417 000 375
R417 000 371
R417 000 377
Functions
Type number
R417 000 357
station transfer
rpm-constant
clutch on/off
combinator on/off
clutch on/off
clutch 1 on/off
clutch 2 on/off
synchronization or trolling
clutch on/off
Indication 3 for
command active, synchronization,
trolling, alarm
command active, synchronization,
trolling, alarm
command active, clutch on, rpm
constant, alarm
command active, rpm constant,
alarm
command active, clutch on, rpm
constant, alarm
command active, combinator on,
rpm constant, alarm
command active, clutch on, rpm
constant, alarm
command active, clutch 1 on,
clutch 2 on, alarm
Figure
1
1
2
3
4
5
6
7
Spare parts
Device
Spare parts
Description
Type number
on request
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
panel cutout
1)
2)
Terminal assignment
Type numbers
Device
Figure
Special
Number of
engines / levers
2 / 2*
Weight
Type number
5.1 kg
Accessories
Device
handle
cable*
*see also cable M12
Figure
4
-
Description
handle for control head type 251
cable to connect the control head to the operation module
Type number
R417 000 107
894 605 480 2
Spare parts
Device
Spare parts
Description
-
Type number
on request
Panel cutout
control head
operation module
standard, horizontal
standard, vertical
special conf.
gear function
engine free conf.
free configuration
Colour Key*
1/2/3/4
R/Y/Y/G
Y/G/Y/R
Y/Y/G/Y
Y/Y/Y/Y
G/R/Y/Y
Y/Y/Y/Y
Key 1
Key 2
Key 3
Key 4
Type number
alarm / test
take-over
take-over
ind. warming up
free [start]
free
take-over
dimmer
ind. Astern
ind. Astern
free [stop]
free
special function
special function
ind. Neutral / dimmer
ind. Neutral
free
free
dimmer
alarm / test
ind. Ahead
ind. Ahead
free
free
Indication module
Fig.
Version
7
speed, 0 100 %, vertical
8
pitch, ahead / neutral / astern [- 100 / 0 / +100], vertical
9
rudder, port / starboard [100 / 0 / 100], horizontal
* R = red, G = green, Y = yellow, ind. = indication
Type number
362 231 500 0
362 231 501 0
362 231 502 0
standard, horizontal
standard, vertical
special conf.
gear function
engine free conf.
free configuration
Colour Key*
1/2/3/4
R/Y/Y/G
Y/G/Y/R
Y/Y/G/Y
Y/Y/Y/Y
G/R/Y/Y
Y/Y/Y/Y
Key 1
Key 2
Key 3
Key 4
Type number
alarm / test
take-over
take-over
ind. warming up
free [start]
free
take-over
dimmer
ind. Astern
ind. Astern
free [stop]
free
special function
special function
ind. Neutral / dimmer
ind. Neutral
free
free
dimmer
alarm / test
ind. Ahead
ind. Ahead
free
free
Indication module
Fig.
Version
7
speed, 0 100 %, vertical
8
pitch, ahead / neutral / astern [- 100 / 0 / +100], vertical
9
rudder, port / starboard [100 / 0 / 100], horizontal
* R = red, G = green, Y = yellow, ind. = indication
Type number
362 231 504 0
362 231 505 0
362 231 506 0
Accessories
Device
Covering plate for panel cutouts
Description
Plate without foil to cover cutouts
Type number
362 231 209 0
panel cutout
Operating temperature
Weight
Operation current
Protection
Illumination
The operating / indication module
can be connected to the CAN-Bus of Marex OS II remote control.
horizontal
vertical
vertical
horizontal
Colour key*
1/2/3/4
G/R/Y/Y
G/R/Y/Y
Y/Y/Y/Y
Y/Y/Y/Y
Key 1
Key 2
Key 3
Key 4
Type number
free [dimmer]
free [dimmer]
free
free
free [alarm/test]
free [alarm/test]
free
free
free [take-over]
free [take-over]
free
free
Technical drawing
Figure 1
Figure 2
Panel cutout
Figure 1
Figure 2
24 V DC:
12 V DC:
modular
- 20 C to + 70 C
4g (2...100Hz) IEC 60068-2-6, test Fc
2.4 kg
24 V DC 25 % / + 30 % or
12 V DC 20 % / + 30 %
3 A max.
6 A max.
IP 20 acc. to IEC 60529 (DIN VDE 0470)
10 A (T)
Protection
Fuse
The MPC
is the central processing unit of the remote control. It is also responsible for data in- and output.
Type numbers
For application
Reversing gear propulsion system
Type number
346 069 000 0
Spare parts
Device
Description
Fuse
fuse 10 A (T)
For repair and / or replacement the software version and adjusted parameters (parameter list) are needed.
Technical drawing
Type number
894 245 201 4
Connection
1, 2, 3 Vs+
4, 5, 6 Vs7, 8
9
AO1
10
11
12
13
AI1
14
15
16
K1
17
18
19
20
K2
21
K3
22
K4
23
24
K5
25
26
K6
27
28
AO2
29
30
AO3
31
32
AI2
33
34
E1
35
E2
36
E3
37
38
E4
39
E5
40
41
E6
42
X11, X12
X21, X22
S1
S2
Function
+
+
+
+
collector
NO
+
NC
+
NO
NO
+
NO
+
NO
+
NO
+
+
+
+
+
+
+
+
+
-
Description
power supply of MPC
power supply
proportional valve A
actuator
proportional valve B
potentiometer
ahead
astern
trolling on/off
trolling
engine start release (closed if gear setting neutral)
start release
speed synchronization on/off
synchronization
electronic speed setting
common AO2
electronic trolling
common AO3
rpm feedback
common AI2
ahead
astern
neutral
common E1-E3
emergency stop
special function
common E4, E5
special function
common E6
internal CAN bus
external CAN bus
terminating resistor
terminating resistor
24 V DC:
12 V DC:
with screw cable gland
cabinet
- 20 C to + 70 C
4g (2...100Hz) IEC 60068-2-6, test Fc
2.4 kg
24 V DC 25 % / + 30 % or
12 V DC 20 % / + 30 %
3 A max.
6 A max.
IP 54 acc. to IEC 60529 (DIN VDE 0470)
10 A (T)
Protection
Fuse
The MPC
is the central processing unit of the remote control. It is also responsible for data in- and output.
Type numbers
For application
Reversing gear propulsion system
Type number
346 069 002 0
Technical drawing
Type number
894 245 201 4
Connection
1, 2, 3 Vs+
4, 5, 6 Vs7, 8
9
AO1
10
11
12
13
AI1
14
15
16
K1
17
18
19
20
K2
21
K3
22
K4
23
24
K5
25
26
K6
27
28
AO2
29
30
AO3
31
32
AI2
33
34
E1
35
E2
36
E3
37
38
E4
39
E5
40
41
E6
42
X11, X12
X21, X22
S1
S2
Function
+
+
+
+
collector
NO
+
NC
+
NO
NO
+
NO
+
NO
+
NO
+
+
+
+
+
+
+
+
+
-
Description
power supply of MPC
power supply
proportional valve A
actuator
proportional valve B
potentiometer
ahead
astern
trolling on/off
trolling
engine start release (closed if gear setting neutral)
start release
speed synchronization on/off
synchronization
electronic speed setting
common AO2
electronic trolling
common AO3
rpm feedback
common AI2
ahead
astern
neutral
common E1-E3
emergency stop
special function
common E4, E5
special function
common E6
internal CAN bus
external CAN bus
terminator resistor
terminator resistor
24 V DC:
12 V DC:
with screw cable gland
plus
- 20 C to + 70 C
4g (2...100Hz) IEC 60068-2-6, test Fc
2.4 kg
24 V DC 25 % / + 30 % or
12 V DC 20 % / + 30 %
3 A max.
6 A max.
IP 54 acc. to IEC 60529 (DIN VDE 0470)
10 A (T)
Protection
Fuse
The MPC
is the central processing unit of the remote control. They is also responsable for data in- and output.
Type numbers
For application
Reversing gear propulsion system
Type number
346 069 003 0
Accessories
Device
Cable for prop-vale and gear setting / feed back signal
Cable for rpm setting / feed back signal and trolling setting
6, 7
Length
2m
5m
10 m
15 m
2m
5m
10 m
15 m
Type number
894 620 279 2
894 620 271 2
894 620 270 2
894 620 272 2
892 620 229 2
892 620 221 2
892 620 220 2
892 620 222 2
323 698 000 0
323 698 100 0
Spare parts
Device
Description
Fuse
Fuse 10 A
Repair / replace
Only repair or complete changing of device possible*
* Software version and adjusted parameters (parameter list) are needed to repair or replace the MPC
Technical drawing
Type number
894 245 201 4
-
Connection
via cable
screw 1 or
connection 2
Plug 4
Plug 3
Plug 5
Plug 6
pin
1*
2*
3*
4*
5*
6*
7*
1
2
3
5
1
2
3
4
5
1
2
3
4
5
6
7
4
5
6
7
1
2
5
6
7
8
Function
+
NC
com
NO
NO
com
+
+
+
ref. 5V DC+
signal
com
+
+
-
power supply
Description
12V DC 20%
24V DC +30%
alarm
start release
trolling valve
trolling on
trolling on
actuator
feedback signal
ahead
astern
reversing gear
ahead
astern
+
neutral
speed setting
+
rpm feedback
+
Plug 7
+
trolling on
signal
+
trolling signal
+
X11, X12
internal CAN bus
X21, X22
external CAN bus
* internal terminal connection
4-20mA / PWM
20-13000Hz
trolling on
alarm feed back off actuator
4-20mA
CAN bus (control head, supplementary modules)
CAN bus (communication between MPCs)
EPU
If the power supply of MPC is not sufficient
Technical data
Operating temperature
Weight
Operating voltage
Operation current
Protection
- 20 C to + 70 C
1.2 kg
24 V DC + 30 % / - 25 %
2.5 A max.
IP 20 acc. to IEC 60 529 (DIN VDE 0470)
The EPU
will be needed if the internal power supply via MPC is not sufficient.
Type numbers
Device
EPU
Technical drawing
Terminal assignment
Type number
346 069 151 0
Type numbers
For application
Reversing gear propulsion system
Special
Master
Slave
Number of engines
1
1
Weight [kg]
0.5
0.4
Type number
362 232 000 0
362 232 010 0
Description
see CAN bus cable M12
Relays unit to switch the out-/ingoing signals from main (mpc-modular)
to emergency remote control
Adapter
to connect a second (third) slave module to the emergency system
Software version and adjusted parameters (parameter list) are needed to repair or replace the module
panel cutout
Type number
R417 000 511
R419 800 162
slave
Connection
Function
Description
Vs
power supply
power supply of emergency module
X1 1
+
2
3
n.c.
4
PE
shield clamp
DI1
ahead
X2 1
+
digital feedback signal of gear box 6-32V DC
2
DI2
astern
3
+
4
5
NO
DO1
alarm
alarm
6
GND
7
NC
rpm setting 0-20mA / 4-20mA / 0-10V / 7.5 92.5 % te
8
PWM rpm by PWM
AO1
9
rpm by 4-20mA
10
+
11
feedback rpm
rpm feedback 0-20mA / 4-20mA
12 AI1
+
13
14 n.c.
shield clamp
15 PE
16
feedback command active
17 DI3
+
for transfer of command between remote control and
emergency control
18
command active
19 DO2
NO
20
+
21
NC
ahead
22 DO3
+
reversing gear
23
NO
astern
24 DO4
+
25
NO
feedback shaft speed
feedback signal of shaft speed 0-10V / 0-20mA
26 AO2
+
27
free
0-20mA / 4-20mA
28 AI2
+
29
30 n.c.
31 PE
shield clamp
32
CAN0
internal CAN bus to connect a slave module
CAN1
external CAN bus of master module to connect the master to the remote control
S1
S2
parameter setting of analog signal range
Actuator
for mechanical gear shifting, setting of engine speed or pitch adjustment of the propeller
Technical data
Design
actuator with internal electronic board
Operating mode
S5 40 % DIN EN 60034-1 (VDE 0530)
Operating temperature
- 25 C to + 60 C
Protection
IP 54 acc. to IEC 60 529 (DIN VDE 0470)
Weight
see table
Supply voltage
24 V DC - 25 % / + 30 %
Operating current
4 A max.
Nominal stroke
see table
Nominal lifting force
100 N
Nominal lifting speed
70 mm / s
The actuator
will be needed if gear shifting, speed or pitch setting is realized by mechanical levers.
Type numbers
Stroke [ mm ]
Weight [ kg ]
70 *
1.8
120 **
2.0
* standard for mechanical gear or speed setting
** for mechanical pitch setting where the propeller can be shifted to sailing position
Type number
323 698 100 0
323 698 110 0
Technical drawing
Stroke [ mm ]
70
120
A [ mm ]
80
130
B [ mm ]
180
230
C [ mm ]
100
150
D [ mm ]
63
60
Accessories
Device
Cable for signal (with two plugs to connect actuator to MPC-plus)
Cable for signal ( to connect actuator to MPC-modular and MPC-cabinet)
Cable for power supply
Length [m]
10
10
10
Type number
R417 000 523
894 620 203 2
894 620 250 2
Actuator
for mechanical gear shifting, setting of engine speed or pitch adjustment of the propeller
Technical data
Design
actuator, directly controlled by MPC or control unit
Operating mode
S5 40 % DIN EN 60034-1 (VDE 0530)
Operating temperature
- 25 C to + 60 C
Protection
IP 54 acc. to IEC 529 (DIN VDE 0470)
Weight
see table
Supply voltage
12 V DC over MPC or control unit
Operating current
4 A max.
Nominal stroke
see table
Nominal lifting force
100 N
Nominal lifting speed
70 mm / s
The actuator
will be needed if gear shifting, speed or pitch setting is realized by mechanical levers.
Type numbers
Stroke [ mm ]
Weight [ kg ]
70 *
1.8
120 **
2.0
* standard for mechanical gear or speed setting
** for mechanical pitch setting where the propeller can be shifted to sailing position
Type number
323 698 020 0
323 698 010 0
Technical drawing
Stroke [ mm ]
70
120
A [ mm ]
80
130
B [ mm ]
180
230
C [ mm ]
100
150
D [ mm ]
63
60
Accessories
Device
Length [m]
Control unit*
see separate page
* can control two actuators of these type via CAN bus. E.g. distance between actuator and MPC is > 600 mm
Type number
346 068 000 0
Qn
housing
seals
poppet valve
max. 8 bar*
0 ... 6 bar
0.02 bar
300 Nl/min.
- 20 C to + 60 C
condensate-free and non-lubricated
compressed air, filtered 50 m
3.0 kg
Al-diecasting
NBR
24 V DC 20%
5%
0.3 A max.
IP 65 to IEC 60 529 (DIN VDE 0470)
vertical
4 g / 2 ... 100 Hz
Supply voltage
Admissible ripple
Current consumption
Protected with plug
Assembly position
Vibration resistance
Application area
Electro-pneumatic pressure control valves convert an electrical signal (current, voltage, resistance)
proportionally into pneumatic pressure. They are used where electrical control is required to act
directly on a change of pressure or force.
Type numbers
Nominal input value**
4 20 mA
0 10 V DC
2 10 kOhm
Type numbers
346 056 550 0
Type number
546 007 681 2
894 045 012 2
346 056 001 2
Functional diagram
1) Mounting thread
2) Loosen plug screw to clean filter
Characteristic line
3) Plug 1
4) Plug 2
1) Supply voltage 2) Nominal input current (Ohmic load 100 Ohm; max. 50 mA: max. 12 V DC; to plug 1; pin 1)
3) actual output value (max. total resistance of downstream device 300 Ohm. The actual value is measured between plug 2, pin 3 and plug 1, pin 1. The actual
value is short-circuit-resistant for a limited time.)
4) The supply voltage must be protected by an external M 0.5 fuse. 5) Shielding must comply with local limiting conditions. In extreme cases the power
supply must also be shielded.
A) Plug 1 B) Plug 2
Fig. 1: Delivery status 4 - 20 mA Fig. 2: Alternative 0 - 20 mA
To ensure the EMV, plug 2 (B) has to be connected through a shielded cable.
Fig. 1: Voltage control 0 10 V DC
Fig. 2: Voltage control 2 - 10 V DC
To ensure the EMV, plug 2 (B) has to be connected through a shielded cable.
Fig. 1: Potentiometer activation 2 10 kOhm
3/2-way-solenoid valve
electromagnetically operated, monostable, ND7
Technical data
Type
Operating pressure range
Nominal flow with supply pressure of 7 bar
output pressure 6 bar and p 0.2 bar
Ambient temperature range
Admissible medium
Weight
Material
Qn
slide valve
see table
1100 Nl/min.
- 20 C to + 70 C
compressed air, lubricated or non- lubricated
0.85 kg
housing Zn-diecasting
seals
BUNA-N
24 V DC 20%
190 mA
IP 65 to IEC 60 529 (DIN VDE 0470)*
ED
100%
Supply voltage
Current consumption
Protected with plug
Duty cycle
Application area
Suitable for pneumatic components which have to be controlled by electronical signals. Eg. gear box,
shaft brake, start and stop of the engine. Valve is non-overlapping.
* Plugs to be ordered separately
Type numbers
Symbol
Function
NC
NO
Pilot control
internal
NC/NO
separate
-0.95 to 10 bar
pilot pressure 3 bar
Connection thread
M 14 x 1.5
Type number
372 352 222 0
372 354 222 0
372 353 222 0
Description
plug connector with LED and protection diode against induced electromotive force
Type number
894 101 610 2
Description
sealings and anker system of valve
coil for 24 V DC 20 %
Type number
372 352 000 2
542 070 702 2
Spare parts
Spare part
Spare part kit
Coil
Technical drawing
Accessories sub-D
Cable equipped with sub-D plugs
CAN bus cable with sub-D plug**
Length [m]
0.5
2
5
10
15
20
30
40
50
60
Type number
894 605 389 2
894 605 446 2
894 605 390 2
894 605 391 2
894 605 392 2
894 605 393 2
894 605 394 2
894 605 395 2
894 605 396 2
894 605 445 2
Length [m]
0.3
0.9
Type number
894 605 388 2
894 605 419 2
Description
male (with pins)
female (with socket)
Type number
346 067 361 2
346 067 362 2
Accessories M12
Cable equipped with M12 plugs
CAN bus cable with M12 plug*
Lentgh [m]
0.5
2
5
10
15
20
30
50
80
100
Type number
894 605 479 2
894 605 480 2
894 605 481 2
894 605 482 2
894 605 483 2
894 605 484 2
894 605 485 2
894 605 486 2
894 605 487 2
894 605 488 2
Description
male (with pins)
female (with socket)
Type number
894 105 426 4
894 105 427 4
Adapter
To combine devices with sub-D and M12 plugs
Adapter cable*
* Connection between CAN bus devices equipped with sub-D or M12 plugs
Device
Adapter
Type number
894 605 489 2
* Shielded distributor for e.g. emergency module with sub-D or M12 plugs
Device
Bus distributor for can bus
Type number
R419 800 162
* Terminal block for connection of shielded data cable to prefabricated cables of Marex OS II
Device
Adapter from 9-pin sub-D to terminal block
Description
male (with pins)
female (with socket)
Type number
894 305 894 2
894 305 895 2
Adapter
To combine devices with sub-D and M12 plugs
Terminal block M12*
* Terminal block for connection of shielded data cable to prefabricated cables of Marex OS II
Device
Adapter from M12 plug to terminal block
Description
male (with pins)
female (with socket)
Type number
R419 800 072
R419 800 073
Accessories push-pull-cable
For mechanical gear shifting, engine speed setting or pitch adjustment of the propeller
Push-pull-cable
Device
Push-pull-cable
Stroke* [mm]
70
120
Length [m]
2
3
2
3
Type number
323 699 415 2
323 699 416 2
895 420 012 2
895 420 013 2
Device
Mounting kit
Type number
323 699 006 2
Bosch Rexroth AG
Pneumatics
Marine Technique
Ulmer Str. 4
D-30880 Laatzen
P. O. Box 11 01 61
D-30856 Laatzen
Phone +49 - 5 11 - 21 36 - 2 51
Fax
+49 - 5 11 - 21 36 - 1 65
www.boschrexroth.com/marine
marinesales@boschrexroth.de