Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 63 views

    Actuated Valves

    Uploaded by

    tjendra
    This document provides specifications and dimensions for pneumatic and electric actuated ball valves. It includes: - Details on the compact size, reliable performance, and standard configurations of the valve and actuator combinations. - Descriptions of the spring-return pneumatic actuators that require only 3.5-8.6 bar of air pressure and have manual overrides. - Specifications on materials, temperature ranges, power requirements, duty cycles, and torque outputs for the pneumatic and electric actuated models. - Charts with dimensions for the different valve and actuator sizes. - Information on optional limit switches for remotely monitoring valve position.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Actuated Valves

    Uploaded by

    tjendra
    63 views4 pages
    This document provides specifications and dimensions for pneumatic and electric actuated ball valves. It includes: - Details on the compact size, reliable performance, and standard configurations of the valve and actuator combinations. - Descriptions of the spring-return pneumatic actuators that require only 3.5-8.6 bar of air pressure and have manual overrides. - Specifications on materials, temperature ranges, power requirements, duty cycles, and torque outputs for the pneumatic and electric actuated models. - Charts with dimensions for the different valve and actuator sizes. - Information on optional limit switches for remotely monitoring valve position.

    Original Description:

    Actuated Valves

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications and dimensions for pneumatic and electric actuated ball valves. It includes: - Details on the compact size, reliable performance, and standard configurations of the valve and actuator combinations. - Descriptions of the spring-return pneumatic actuators that require only 3.5-8.6 bar of air pressure and have manual overrides. - Specifications on materials, temperature ranges, power requirements, duty cycles, and torque outputs for the pneumatic and electric actuated models. - Charts with dimensions for the different valve and actuator sizes. - Information on optional limit switches for remotely monitoring valve position.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    63 views4 pages

    Actuated Valves

    Uploaded by

    tjendra
    This document provides specifications and dimensions for pneumatic and electric actuated ball valves. It includes: - Details on the compact size, reliable performance, and standard configurations of the valve and actuator combinations. - Descriptions of the spring-return pneumatic actuators that require only 3.5-8.6 bar of air pressure and have manual overrides. - Specifications on materials, temperature ranges, power requirements, duty cycles, and torque outputs for the pneumatic and electric actuated models. - Charts with dimensions for the different valve and actuator sizes. - Information on optional limit switches for remotely monitoring valve position.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Pneumatic and Electric

    Actuated Ball Valves


    BVP80 Series

    U Compact Size and Lightweight


    Construction
    U Reliable, Long Lasting Performance
    U Standard In Line or Cross Mount
    Valve to Actuator Configurations
    U Spring-Return Design Accommodates
    Air Supply as Low as 3.5 bar (50 psi)
    U Stainless Steel External Trim and FKM
    O-Rings Standard
    U Direct Valve Stem Coupling to Actuator
    Shaft Minimizes Backlash
    U Manual Override Standard
    U Electric Actuators Feature Two 12 NPT
    Conduit Ports and Integral Thermal
    Overload Protection

    The pneumatic actuators on the BVP/BVPS80 and


    BVP/BVPS70 Series offer the latest technology for
    pneumatically actuating BV80 Series ball valves with
    NPT threads and BV70 Series with compression
    fittings. The BVP80 and BVP70 Series are a
    combination of the three key elements for long,
    reliable, trouble free lifea premium quality ball valve,
    a quality actuator designed to meet the torque
    requirements of the valve, and a mounting system
    which assures alignment and rigidity.
    The BV80 and BV70 ball valves low operating torque
    makes possible a compact actuator that is both
    economical to install and operate. Precise
    machining of all the valve components, including
    the seats, controls the sealing preload. This assures
    bubble-tight sealing, minimizes the operating torque
    and optimizes the valve life.
    The mounting system precisely couples the actuator
    drive shaft to the valve stem. Additionally, the valve
    stem nut is fixed within the actuator shaft. These
    features combined with a rigid mounting bracket,
    results in a pneumatically actuated ball valve which
    minimizes backlash, assures optimum stem seal life
    and eliminates any possibility of stem nut backing off
    while in service.

    BVP82-SS shown
    smaller than actual size.

    The BVPS80 and BVPS70 Series offers a springreturn model requiring only 3.5 bar (50 psi) supply air
    that can spring to open or close without loss of output
    torque from the air operated side. This is achieved by
    two opposing lightweight nylon resin or manufactured
    aluminum housed spring modules that are fully
    compressed by air operated diaphragm pistons.
    All BVPS80 and BVPS70 Series are designed to
    operate using an air supply of 3.5 to 8.6 bar (50 to
    125 psi). The air can be delivered by direct mounting
    pilot valves having NAMUR interfaces or from remote
    pilot valves connected via means of 18 NPT female
    threaded orifices in the actuator face plates.
    Caution: Care must be taken to assure that the
    output torque of the BVP80 Series actuator selected
    is adequate to turn the valve or device to be operated.
    A Limit Switch accessory is offered for the pneumatic
    actuators. The BVLS limit switch is easily mounted
    to any pneumatic actuator and provides a means
    to remotely display valve position or to interconnect
    the valve with related equipment such as pumps
    or other valves.
    The limit switch accessory utilizes two mechanical
    S.P.D.T. (Single-Pole, Double-Throw) micro switches
    that respond to actuators fully open or fully closed
    position by means of a cam fitted to the actuator top
    shaft. The switches are rated at 10 amp 250 Vac max.
    J-47a

    BVE83-SS shown
    smaller than
    actual size.

    BVP71 shown
    smaller than actual size.

    The limit switch is totally enclosed and may be used


    in applications where a dust tight or weather tight
    enclosure is required as well as in those locations
    where general purpose enclosures will serve. The
    housing, like our pneumatic actuators, is made from
    6061-T6 aluminum and has a PTFE impregnated
    hard-anodized surfaces to enhance corrosion
    resistance.

    SPECIFICATIONs

    (BVP/BVPS80 and BVP/BVPS70 Series)


    Materials of Construction
    
    Body: Aluminum with PTFE impregnated hard anodized
    surfaces
    External Hardware: (pinion shaft, driver, end caps)
    300 Series Stainless Steel
    Spring Modules: Nylon resin or machined aluminum
    housing, 300 SS hardware
    External Trim: 300 Series Stainless Steel
    Temperature: -28.8 to 176.6C (-20 to 350F)
    Power: 3.4 to 8.6 bar (50 to 125 psi) air. Sufficient air
    delivery must be available at the actuator to ensure
    dependable operation. The following precautions should be
    observed: Air supply should be clean and free of moisture.
    When dirty or wet air is a problem; a filter/separator should
    be specified; these units are most effective when installed
    as closely as possible to the actuator. A filter, when used,
    should permit a minimum flow of 4 scfm at an upstream
    pressure of 4 bar (60 psi). Eliminate severe restrictions to air
    flow (certain solenoid valves and fittings). The most restricted
    passage must have an area no smaller than 0.012 in2, the
    area of 3 mm (18") diameter orifice. If more than a single
    actuator is to be supplied by an individual pilot, the minimum
    passage requirement applies per actuator.
    Port Connections: 18 NPT
    Tubing: For short runs up to 1.5 m (5'), 4 mm (532") I.D. is
    suitable, 6 mm (14") I.D. will serve up to 9 m (30'). For longer
    runs, use 10 mm (38") I.D. or larger.
    Interface: NAMUR
    Duty Cycle: 100%
    Cycle Time: (To open or close) approx 12 to 1 second*

    The BVE80 and BVE70 Series electric actuated ball


    valves are a compact mounting system that assures
    rigid and precise coupling of the actuator to the valve.
    The unique system features machined alignment
    brackets oriented with precision locator elements that
    serve to absorb the reaction torque independent of
    the mounting bolts. The end result is a system that
    eliminates the common problem of the mounting bolts
    loosening while in service. Additional features include
    thermal overload protection and manual override.

    SPECIFICATIONS

    (BVE80 and BVE70 Series)


    Materials of Construction
    Enclosure: FR50 Cover, PTFE coated cast aluminum base
    Shaft: 18-8 Stainless Steel
    External Trim: 300 Series Stainless Steel
    Temperature: 4.4 to 65.5C (40 to 150F)
    Motor: Reversing, brushless, capacitor-run
    with auto-reset thermal overload protection
    Gear Train: Permanently lubricated, maintenance free
    Power: 120 Vac 50/60 Hz single phase
    Ports: (2) 12 NPT conduit
    Cycle Time: 6 seconds
    Duty Cycle: Models smaller than 25 mm (1"):100%,
    models 32 mm (114") and larger: 75%
    Torque Output:
    150 inlbs: models smaller than 25 mm (1")
    300 inlbs: models 114" and larger

    * Dependent upon actuator model, air pressure and delivery

    J-48a

    BVP80/BVPS80 Dimensions

    Valve
    Size

    Approximate Dimensions, Inches

    Actuator
    Model

    B1

    J
    2.22

    1/4 & 3/8

    3.88

    1.00

    1/2

    4.06

    1.18

    2.61

    1.50

    2.94

    6.44

    2.00

    3.32

    7.59

    2.12

    3.70

    1.36 1.00 1.53

    3/4
    1

    Spring
    Return

    .31

    3.06 4.67

    Double
    Acting

    1-1/4
    -1/2

    1.87 1.55 2.25

    .50

    4.50

    4.38

    8.09 1.10

    5.18

    .32

    3.00

    4.75

    8.47

    2.62

    4.25

    3.00

    4.57

    8.31 2.81

    3.62

    .57

    BVPS81-SS shown
    smaller than actual size.
    5.28 11.23 3.50

    .82

    BVP70/BVPS70 Dimensions
    BVP71 shown smaller
    than actual size.

    Approximate Dimensions - Inches


    Actuator Model
    A
    B
    B1 C
    D
    E
    F
    G
    H
    I
    J
    K
    L
    M
    N
    1/4
    4.51
    1.00 3.72
    3/8
    4.51
    1.00 3.70
    1/2 Spring Return Double Acting 1.46 1.00 1.53 .31 3.06 4.67 4.61 .32 3.00 1.00 3.94 3.62 8.31 2.81 .57
    3/4
    4.91
    1.19 4.17
    1
    5.37
    1.50 4.92

    Tube
    Size

    BVP84-SS shown smaller


    than actual size.

    Dimensions - Inches

    Valve
    Size

    1/4 & 3/8


    1/2
    3/4
    1
    1-1/4
    1-1/2
    2

    1.00
    1.18
    1.50
    1.94
    2.12
    2.62
    3.00

    2.22
    2.61
    2.94
    3.32
    3.70
    4.25
    4.57

    1.15
    1.24
    1.40
    1.62
    1.76
    2.02
    2.21

    3.00
    3.00
    3.00
    3.00
    4.80
    4.80
    4.80

    6.74
    6.74
    6.74
    6.74
    7.24
    7.24
    7.24

    6.25
    6.25
    6.25
    6.25
    6.25
    6.25
    6.25

    4.75
    4.75
    4.75
    4.75
    4.75
    4.75
    4.75

    2.23
    2.23
    2.23
    2.23
    2.23
    2.23
    2.23

    2.78
    2.78
    2.78
    2.78
    2.78
    2.78
    2.78

    5.77
    5.77
    5.77
    5.77
    5.77
    5.77
    5.77

    10.35
    10.35
    10.35
    10.35
    10.85
    10.85
    10.85

    J-49a

    BVE80 Dimensions

    O
    9/16
    11/16
    7/8
    1-1/8
    1-1/2

    Limit Switch Dimensions

    BVE70 Dimensions

    Size
    1/4
    3/8
    1/2
    3/4
    1

    A
    1.00
    1.00
    1.18
    1.50
    1.94

    B
    3.72
    3.70
    3.94
    4.17
    4.92

    Approximate Dimensions - Inches


    C
    D
    E
    F
    G
    H
    1.15
    1.15
    1.24 3.00 6.74 6.25 4.75 2.23
    1.40
    1.62

    2.78

    To Order
    Pneumatic Double-Acting with
    Pneumatic Spring-Return with

    Integral Pilot 120 Vac

    Integral Pilot 120 Vac

    Electric 120 Vac

    Compression
    Compression

    Fitting
    Fitting
    Compression Fitting
    NPT Connection Connection
    NPT Connection Connection
    NPT Connection Connection
    Brass
    Model No. Model No.
    Model No.
    Model No.
    Model No. Model No.
    Size
    BVP81 BVP71 BVPS81 BVPS71 BVE81 BVE71

    BVP82 BVP72 BVPS82 BVPS72


    BVE82 BVE72

    BVP83 BVP73 BVPS83 BVPS73


    BVE83 BVE73

    BVP84 BVP74 BVPS84 BVPS74


    BVE84 BVE74

    BVP85 BVP75 BVPS85 BVPS75


    BVE85 BVE75
    1
    BVP86
    BVPS86

    BVE86
    1
    BVP87
    BVPS87

    BVE87
    1
    BVP88
    BVPS88

    BVE88
    2
    316 Stainless Steel
    Model No. Model No.
    Model No.
    Model No.
    Model No.
    Model No.
    Size
    BVP81-SS BVP71-SS BVPS81-SS
    BVPS71-SS
    BVE81-SS BVE71-SS

    BVP82-SS BVP72-SS BVPS82-SS


    BVPS72-SS
    BVE82-SS BVE72-SS

    BVP83-SS BVP73-SS BVPS83-SS


    BVPS73-SS
    BVE83-SS BVE73-SS

    BVP84-SS BVP74-SS BVPS84-SS


    BVPS74-SS
    BVE84-SS BVE74-SS

    BVP85-SS BVP75-SS BVPS85-SS


    BVPS75-SS
    BVE85-SS BVE75-SS
    1
    BVP86-SS
    BVPS86-SS
    BVE86-SS

    1
    BVP87-SS
    BVPS87-SS
    BVE87-SS

    1
    BVP88-SS
    BVPS88-SS
    BVE88-SS

    2

    Accessories
    Model No.
    BVLS1
    BVLS2

    Description
    Limit switch for to 1" pneumatic valves
    Limit switch for 1 to 2" pneumatic valves

    Comes complete with operators manual. BVP and BVPS pneumatic units include solenoid valve.
    Ordering Examples: BVP86-SS, 316SS 114 FNPT ball valve with pneumatic actuator.
    BVE85, Brass 1 FNPT ball valve with electric actuator.

    J-50a

    You might also like