Pipe Pusher

de
a
M n
i
ny
a
rm
e
G
Prime Pipe Pusher

400 t - 1,000 t
Extra Power for Pipe Pullback
Pipe Pusher PPP 400 RP (PPP 1,000 RP)

Pull-/Push force of 400 t up to 1,000 t
Operating in both directions
Variable feeding length of 6 m up to 24 m
Suitable for any diameter ranging from 20 to 60
ation
oper
Tension chain can be upgraded (optional)

Hydraulic carriage motors can be upgraded (optional)
Low weight
Only minimum foundation work required
ation
oper
Versions of Prime Pipe Pusher

Conversion to Prime Pipe Pusher, Frame Version
PPP 400 RP-F (PPP 1,000 RP-F)
Pull- /Push force: 400 t up to 1,000 t
Clamping range: 20 up to 60
Weight: approx. 50 t
Conversion to Prime HDD- Rig, Frame Version

PD 400/120 RP-F
Pull- /Push force: 400 t
Torque: 120 kNm
Conversion to Prime HDD- Rig, Crawler Version

PD 400/120 RP-C
Pull-/ Push force: 400 t
Torque: 120 kNm
Conversion to Auger Drilling Machine

PPB 400/90 RP (PPB 1,000/90 RP)
Pull-/ Push force: 400 t - 1.000 t
Torque: 90 kNm
Technical data
The Prime Pipe Pusher mainly serves for additional push
perfect solution for application
Advantages:
Best possible enclosing angle
Even level of power transfer
(no damage to PE, PP, GFK coatings)
On customers request the Prime Pipe Pusher is also availDepending on customers requirements and job- site
alternatively on a slide or on steel frame. In combioffers the perfect solution for demanding job- sites
Light weight
Equal push and pull forces
Push force is transferred via a number of tensioning

pipe to be pulled in. The geometrical shape of the
at the entire circumference of the pipe and thus
Suitable for any diameter

The number of chains can be extended when
higher push or pull forces are needed (optional)
Only minimum abutment work required.
The casing is directly linked to the feeding system (cylinder,

thus allowing for a maximum
This system enables a unique light weight
1000 mm
Resultant forces of 500 t pull force
500 t
500 t
27.8 t
27.8 t
18,000 mm
System structure of Prime Pipe Pusher

PPP 500 RP
Pull-Push force: 500 t up to 1,000 t
Tensioning elements
Variable quantity possible
for 20 to 60
(508 mm - 1,524 mm)
High-power feed motor

extendable (optional)
Feed mast (light and very robust)

Variable in length 20 ft. to 80 ft.
8
or pull force with pipe pullback, but also offers the

combined with tunnel boring machines.
Advantages:
Best possible enclosing angle
Even level of contact pressure
(no damage to PE, PP, GFK coatings)
able with cylinder drive or Rack & Pinion (R & P) system.

conditions the Prime Pipe Pusher can be mounted
nation with the optional drive systems this product
working with the pipeline diameters of 20 to 60.
Suitable for any diameter

The number of chains can be extended to allow
for transmission of increased force (optional).
chains, which are installed into a chain housing, onto the

tensoning chain guarantees an even surface pressure
enables transfer of a push force of up to 100 t per chain.
Rotating base frame.
R&P) and has a capacity of four to ten tensioning chains,

push force of 400 t to 1,000 t.
construction with utmost stability.
Resultant forces of 500 t pull force
1900
feed rate
500 t
500
158
158
System structure of Prime Pipe Pusher

PPP 500 DZ
Pull-Push force: 500 t
Tensioning elements
Variable quantity possible
for 20 to 60
(508 mm - 1,524 mm)
Feed by 4 feeding cylinders
Stable, separable
base frame
9
10
11
Application examples
Application example 1
tio
lla
ta
ns
gi
si
Ca
Pilot drilling
e
Pip
Pipe pulling
12
ing
h
us
n
Tu
e
riv
el d
Pipe pulling
illing
r dr
e
g
u
A
13
Job-Sites
Job-Site Prime Pipe Pusher Rack & Pinion
PPP 400 RP (PPP 1.000 RP)
Pull-/ Push force: 400 t up to 1,000 t
Job-Site Prime Pipe Pusher Cylinder Version

PPP 400 Z4
Pull-/ Push force: 400 t
14
15
PRIME DRILLING GmbH

Ludwig-Erhard-Strae 4
D-57482 Wenden-Gerlingen
Tel. +49 (0) 2762 930 96-0
Fax +49 (0) 2762 930 96-50
e-mail: info@prime-drilling.de
www.prime-drilling.de
11/2014
PRIME DRILLING has been manufacturing high- quality Horizontal Directional Drilling rigs and components
on its 4,000 m2 production area and 800 m2 office area with nearly 70 employees since the year 2000.
16

Pipe Pusher

Uploaded by

Copyright:

Available Formats

Pipe Pusher

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pipe Pusher

Uploaded by

Copyright:

Available Formats

de

Prime Pipe Pusher

Extra Power for Pipe Pullback

Pipe Pusher PPP 400 RP (PPP 1,000 RP)

Tension chain can be upgraded (optional)

Versions of Prime Pipe Pusher

Conversion to Prime HDD- Rig, Frame Version

Conversion to Prime HDD- Rig, Crawler Version

Conversion to Auger Drilling Machine

Push force is transferred via a number of tensioning

Suitable for any diameter

The casing is directly linked to the feeding system (cylinder,

Resultant forces of 500 t pull force

System structure of Prime Pipe Pusher

High-power feed motor

Feed mast (light and very robust)

or pull force with pipe pullback, but also offers the

able with cylinder drive or Rack & Pinion (R & P) system.

Suitable for any diameter

chains, which are installed into a chain housing, onto the

Rotating base frame.

R&P) and has a capacity of four to ten tensioning chains,

Resultant forces of 500 t pull force

System structure of Prime Pipe Pusher

Feed by 4 feeding cylinders

Job-Site Prime Pipe Pusher Cylinder Version

PRIME DRILLING GmbH

You might also like