Professional Documents
Culture Documents
Features/Benefits: Production Testing Solutions Three-Phase Test Separator
Features/Benefits: Production Testing Solutions Three-Phase Test Separator
TETRAs Three-Phase Test Separator is used to separate gas, oil and, water to a level that permits accurate measurement of each
produced phase. Gas is measured using a differential orifice meteran AGA standard methodology. Liquid measurements are
obtained from industry standard turbine flow meters. Optionally, devices such as gas turbines or vortex meters can be incorporated
for gas measurement. The test separator is manufactured to the latest ASME vessel pressure codes and power piping standards.
For operation in corrosive environments, units can be manufactured to meet NACE MR-01-75. Units are available in several sizes
and pressure ratings for operation in different flow rate capacities and line pressures. The test separator vessel is equipped with
dual pressure safety relief devices. Sufficient valves are available to bypass components or comingle outlet flows as needed. Units
can be can be supplied to DNV 2-7.1 structural standards when needed.
Features/Benefits
Applications
Technical Specifications
Working Pressure (Psi)
1,440
1,440
1,440
2,025
2,025
-20 / +130
-20 / +130
-20 / +130
-20 / +130
-20 / +130
Vessel Size
30 ID x 10SS
36 ID x 10SS
42ID x 12SS
36ID x 10SS
48ID x 12SS
Gas (MMSCF/D)
30
40
80
65
95
4500
5200
11,000
6,000
17,000
Gas Meter
Liquid Meters
2,3
2,3
Service Design
Stand / NACE
Stand / NACE
Stand / NACE
Stand / NACE
Applicable Codes
ASME B31.3
Stand / NACE
NACE MR01-75
Dimensions (W x L x H)
711x212x76
711x212x76
76x19x83
711x212x8
76x19x83
Weight (lbs)
15,000
20,000
36,000
30,000
52,000
UR
NS
MP
RIV
LOY
EES
R
ZE O
US
TO M
o
Et
ERS