Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    BS-655/MAR: Optical Smoke Detector

    Uploaded by

    ak
    This document provides information on an optical smoke detector manufactured by Olympia Electronics, a European company. It lists the detector's technical specifications, including an operating voltage of 18-30V DC, sensitivity of 0.120dB/m, and operating temperature range of -10 to 60°C. The detector has an alarm LED indicator and can connect to a fire alarm panel or external LED driver. Installation and operation instructions are provided, such as installing the plastic base on the ceiling and fastening the detector unit, checking operation by spraying smoke every 6 months, and connecting up to 30 detectors per zone.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    BS-655/MAR: Optical Smoke Detector

    Uploaded by

    ak
    24 views2 pages
    This document provides information on an optical smoke detector manufactured by Olympia Electronics, a European company. It lists the detector's technical specifications, including an operating voltage of 18-30V DC, sensitivity of 0.120dB/m, and operating temperature range of -10 to 60°C. The detector has an alarm LED indicator and can connect to a fire alarm panel or external LED driver. Installation and operation instructions are provided, such as installing the plastic base on the ceiling and fastening the detector unit, checking operation by spraying smoke every 6 months, and connecting up to 30 detectors per zone.

    Original Description:

    Detector

    Original Title

    Smoke Detector

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on an optical smoke detector manufactured by Olympia Electronics, a European company. It lists the detector's technical specifications, including an operating voltage of 18-30V DC, sensitivity of 0.120dB/m, and operating temperature range of -10 to 60°C. The detector has an alarm LED indicator and can connect to a fire alarm panel or external LED driver. Installation and operation instructions are provided, such as installing the plastic base on the ceiling and fastening the detector unit, checking operation by spraying smoke every 6 months, and connecting up to 30 detectors per zone.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    BS-655/MAR: Optical Smoke Detector

    Uploaded by

    ak
    This document provides information on an optical smoke detector manufactured by Olympia Electronics, a European company. It lists the detector's technical specifications, including an operating voltage of 18-30V DC, sensitivity of 0.120dB/m, and operating temperature range of -10 to 60°C. The detector has an alarm LED indicator and can connect to a fire alarm panel or external LED driver. Installation and operation instructions are provided, such as installing the plastic base on the ceiling and fastening the detector unit, checking operation by spraying smoke every 6 months, and connecting up to 30 detectors per zone.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    High Quality European based Manufacturers

    BS-655/MAR

    OPTICAL SMOKE DETECTOR


    TECHNICAL CHARACTERISTICS

    OPERATION VOLTAGE
    START UP POWER CONSUMPTION
    STAND BY POWER CONSUMPTION
    ALARM POWER CONSUMPTION
    SENSITIVITY
    INDICATORS
    OUTPUT
    DEGREES OF COVER PROTECTION
    PRODUCED IN ACCORDANCE WITH
    OPERATION TEMPERATURE RANGE
    RELATIVE HUMIDITY
    EXTERNAL DIMENSIONS
    TYPICAL WEIGHT
    GUARANTEE

    Thank you for purchasing this product of


    Olympia Electronics. A European manufacturer.
    GENERAL
    Before installing the detector, the user must read
    these instructions carefully and store this manual
    for future reference.
    The detectors BS-655/MAR are used on ships
    and were created to offer quick detection in case
    of fire.
    They have two parts, one plastic base which is
    installed on the ceiling and the main unit of the
    detector which is fastened to the base by a simple
    turning to the right. The detectors have an
    indication led which lights continuously in case of
    fire detection until there is a reset signal from the
    panel. The indication led also flashes every 4 sec
    to indicate good operation. These detectors can
    cooperate with conventional fire alarm panels.

    18-30V DC
    150A for 50 sec
    50A
    20-30mA
    0.120dB/m
    Alarm LED
    To panel / to external LED driver
    IP 44
    EN 54-7, IEC 60092-504, IEC 60533
    o
    -10 to 60 C
    Up to 95%
    103 (diam.) x 48 (height) mm
    160gr.
    2 years

    detectors must not exceed 15m. Also the


    detectors must be placed away from fluorescent
    tubes at least 50 cm.
    The cables cross section must be from 0.5 to
    1.5mm2.
    ATTENTION!!
    After the device is installed, care must be taken,
    so that the detector vents are not blocked by
    anything (i.e. dust, paint). Failing to do so will
    prevent the smoke particles to enter
    the
    detection chamber.
    After the installation, it is the sole
    responsibility of the user to maintain the
    detector for good operation.

    OPERATION CHECK
    The operation check can be done by spraying a
    small amount of smoke into the detectors
    chamber. You can use the special smoke device
    A-752 of our company, or a similar device.
    It is advised to conduct a good operation test
    every 6 months and every time the detector
    position is changed.
    It is essential to have good air circulation inside
    the detector. Therefore care must be taken so
    that the vents of the detector are not covered.
    NOTE
    The detectors must be placed in the ceiling on
    visible areas with no side obstacles and away
    from sides with no air circulation or strong air
    currents and vapors. Each detector covers
    almost 50 m2 and the distance between two
    Page 1 from 2

    921655003_23_001

    Installation procedure
    fasten

    -L

    +R

    +L

    IN-

    UT
    O

    OU

    Indication marks

    Mounting base

    Figure 2

    OU

    -R

    -R

    +L

    IN-

    -L

    Te r
    m
    res inal
    ist
    or

    +R

    +L

    IN-

    -L

    UT
    O

    +R

    OU

    Figure 1.

    UT
    O

    From zone
    of the panel

    -R

    unfasten

    Indication
    LED

    Connection
    with external
    LED

    Connection
    You can connect up to 30 detectors BS-655/MAR on each zone.
    If the power of the detectors is turned off, wait for 3-5 seconds before you turn the power on again.

    1. Detach the detector from its base by turning it anticlockwise until the side marks are aligned.
    2. Install the base with the included mounting parts (point 5).
    3. Connect the power cables (respect to polarity) according to the installation requirements (figure
    1,2).
    4. Place carefully the detector, so as to align the side marks and turn it clockwise all the way.
    Power the device and after 3-5 seconds will be ready to operate.
    CONNECTION
    1. IN-OUT -L : It is connected to the zone of the panel or to the (IN-OUT -L) contact of the
    previous detector.
    2. OUT +R : It is connected to the next detector (IN +L) or if it is the last one to the terminal resistor.
    3. OUT +R and -R : It is connected with the external LED.
    4. IN +L : It is connected to the zone of the panel or to the (OUT +R) contact of the previous
    detector.

    Page 2 from 2

    921655003_23_001

    You might also like