Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 89 views

    Beam Column Web Connections

    Uploaded by

    msiddiq1
    This document provides a summary of the forces and capacities calculated for the design of a flexible end plate connection according to BS5950-1990. It includes checks for the plate length, bolt tensions and shears, plate shears and bearings on bolts, bolt bearings on the plate and column, and weld capacity. The summary shows that all components meet or exceed the applied loads based on the given member properties and connection geometry. Detailed calculations are provided to support each check. Bolt forces are also listed for an ultimate load combination.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Beam Column Web Connections

    Uploaded by

    msiddiq1
    89 views9 pages
    This document provides a summary of the forces and capacities calculated for the design of a flexible end plate connection according to BS5950-1990. It includes checks for the plate length, bolt tensions and shears, plate shears and bearings on bolts, bolt bearings on the plate and column, and weld capacity. The summary shows that all components meet or exceed the applied loads based on the given member properties and connection geometry. Detailed calculations are provided to support each check. Bolt forces are also listed for an ultimate load combination.

    Original Description:

    Beam Column Web Connections

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a summary of the forces and capacities calculated for the design of a flexible end plate connection according to BS5950-1990. It includes checks for the plate length, bolt tensions and shears, plate shears and bearings on bolts, bolt bearings on the plate and column, and weld capacity. The summary shows that all components meet or exceed the applied loads based on the given member properties and connection geometry. Detailed calculations are provided to support each check. Bolt forces are also listed for an ultimate load combination.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    89 views9 pages

    Beam Column Web Connections

    Uploaded by

    msiddiq1
    This document provides a summary of the forces and capacities calculated for the design of a flexible end plate connection according to BS5950-1990. It includes checks for the plate length, bolt tensions and shears, plate shears and bearings on bolts, bolt bearings on the plate and column, and weld capacity. The summary shows that all components meet or exceed the applied loads based on the given member properties and connection geometry. Detailed calculations are provided to support each check. Bolt forces are also listed for an ultimate load combination.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    Job Number

    Software Consultants (Pty) Ltd


    Internet: http://www.prokon.com
    E-Mail : mail@prokon.com

    Sheet

    Job Title
    Client

    Calcs by

    Checked by

    Date

    S19

    Flexible End Plate Connection - Ver W2.4.00 - 25 Mar 2008


    Title : Default Connection
    Code of Practice : BS5950 - 1990
    Created : 20/09/2016 23:31:53
    Notes and Assumptions

    Bolts are referred to by column and row number. Columns are


    numbered from left to right, and rows from top to bottom.
    All bolt holes are assumed to be normal clearance holes.
    All bolts are assumed to have threads in their shear planes.

    2
    3

    Summary
    Check

    Member

    Summary of Forces and Capacities for Design to BS5950 - 1990


    Type

    Plate

    Length/Beam Depth

    N/A

    2b

    Bolts

    Tension

    N/A

    2a
    2c

    2d
    2e
    3a
    3a
    3b
    3c
    3c

    4a
    4b
    5

    Bolts
    Bolts
    Bolts
    Bolts

    Plate
    Plate
    Bolts

    Plate
    Plate
    Bolts

    Column
    Weld

    Shear

    Combined
    Slip

    Slip + Ten.

    Linear Shear 1
    Linear Shear 2
    Bearing

    Bearing 1
    Bearing 2
    Bearing
    Bearing

    Strength

    N/A

    LC

    Applied

    0.6
    8.8
    0
    0

    Capacity

    Units

    0.6 Ratio

    42.4 kN
    1 kN

    1 Ratio

    % of Cap.

    98.5

    O.K.

    O.K.

    20.6

    O.K.
    O.K.

    N/A

    N/A

    N/A kN

    N/A

    17.5

    204.1 kN

    8.6

    O.K.

    8.8

    124.2 kN

    O.K.

    N/A
    1
    1
    1
    1
    1
    1

    N/A

    17.5

    8.8
    8.8
    8.8
    8.8
    0.1

    N/A Ratio

    192.2 kN

    N/A

    9.1

    58.5 kN

    15

    89.4 kN

    9.8

    73.1 kN
    42.1 kN
    1 kN

    12

    20.8
    14.3

    N/A
    N/A

    O.K.
    O.K.
    O.K.
    O.K.
    O.K.
    O.K.

    Job Number
    Software Consultants (Pty) Ltd
    Internet: http://www.prokon.com
    E-Mail : mail@prokon.com

    Sheet

    Job Title
    Client

    Calcs by

    Checked by

    Input

    Bolt Shear Analysis

    Non-Linear

    Bolt Grade

    8.8

    BoltType

    Bearing

    Bolt Size (mm)

    12

    Member Ultimate Strength (MPa)

    450

    Member Yield Strength (MPa)

    300

    Weld Ultimate Strength (MPa)

    480

    Weld Size (mm)


    Member

    Column
    Beam

    Beam angle

    6
    Type

    I-sections (Parallel flange)


    I-sections (Parallel flange)

    Plate height (mm)

    10

    Plate offset from top of beam (mm)

    22

    Plate Connected to :

    Top Edge (mm)

    Side Edge (mm)

    Column Pitch (mm)


    Row Pitch (mm)

    0.0

    150

    Plate thickness (mm)

    Rows of Bolts

    203x133x30
    126

    Plate width (mm)

    Columns of Bolts

    Designation

    254x146x43

    Web
    Connection
    1
    2

    30
    40

    Not Applicable
    40

    Date

    Job Number
    Client

    Calcs by

    Checked by

    Date

    Shear

    Software Consultants (Pty) Ltd


    Internet: http://www.prokon.com
    E-Mail : mail@prokon.com

    Sheet

    Job Title

    Axial
    Loads

    35

    Axial (kN)
    10

    Service Loads

    Shear (kN)

    Axial (kN)

    Plan Section
    147.3

    10

    133.9

    40

    Ultimate Loads

    Shear (kN)

    259.6

    Load Case

    Job Number
    Client

    Calcs by

    Checked by

    Date

    30

    Elevation

    40

    30

    Beam Section

    40

    Software Consultants (Pty) Ltd


    Internet: http://www.prokon.com
    E-Mail : mail@prokon.com

    Sheet

    Job Title

    Job Number
    Software Consultants (Pty) Ltd
    Internet: http://www.prokon.com
    E-Mail : mail@prokon.com

    Sheet

    Job Title
    Client

    Calcs by

    Checked by

    Date

    Check 1 : Recommended Detailing Requirements


    Ratio =
    =

    Plate_Height
    Beam_Depth
    126
    206.8

    = 0.609

    OK

    Check 2a : Shear Capacity of the Column Bolts

    The worst load is encountered for Load Case : 1


    when Fsmax =8.75 kN

    The resistance of any bolt is :


    Ps =
    =

    6.3.2

    2 . ps. As
    1000

    2 375 88.216
    1000

    = 66.162 kN

    Column bolt shear is safe

    Check 2b : Tension Capacity of the Column Bolts

    There are no tensile forces on the Column bolts

    Check 2c : Combined Capacity of the Bolts

    There are no tensile forces on the Bolts

    Check 3a: Shear Capacity of the Plate

    The worst load is encountered for Load Case : 1


    with Fv = 17.5 kN
    The Linear Shear Capacity of the Plate is the lesser of :

    0.6 . py. Av
    Pv =
    1000
    =

    0.6 300 1134


    1000

    = 204.120 kN

    4.2.3

    Job Number
    Software Consultants (Pty) Ltd
    Internet: http://www.prokon.com
    E-Mail : mail@prokon.com

    Pv =
    =

    Sheet

    Job Title
    Client

    Calcs by

    Checked by

    Date

    0.5 . Us . Avnet
    1000

    0.5 450 854


    1000

    = 192.150 kN

    Plate Shear is safe

    Check 3b: Bearing on Bolts by the Plate

    The worst load is encountered for Load Case : 1


    with Fb = 8.75 kN
    The Bearing capacity on any bolt is :

    d . t . pbb
    Pbb =
    1000
    =

    6.3.3.2

    12 10 1035
    1000

    = 124.200 kN

    Bolt bearing on the Plate is safe

    Check 3c: Bearing Capacity of the Plate

    The worst load is encountered for Load Case : 1


    with Fb = 8.75 kN

    The Bearing Capacity of the Plate at any Bolt is the lesser of :

    d . t . pbs
    Pbs =
    1000
    =

    6.3.3.3

    12 10 487.5
    1000

    = 58.500 kN
    And

    The worst load is encountered for Load Case : 1


    with Fb = 8.75 kN

    6.3.3.3

    Job Number
    Software Consultants (Pty) Ltd
    Internet: http://www.prokon.com
    E-Mail : mail@prokon.com

    Sheet

    Job Title
    Client

    Calcs by

    Checked by

    Date

    1. . .
    e t pbs
    2
    Pbs =
    1000

    1
    30 10 487.5
    2
    =
    1000
    = 73.125 kN

    Plate bearing is safe

    Check 4a: Bearing on the Bolts by the Column web

    The worst load is encountered for Load Case : 1


    with Fb = 8.75 kN
    The Bearing capacity on any bolt is :

    d . t . pbb
    Pbb =
    1000
    =

    6.3.3.2

    12 7.2 1035
    1000

    = 89.424 kN

    Bolt bearing on column web is safe

    Check 4b: Bearing Capacity of the Column

    The worst load is encountered for Load Case : 1


    Bmax = 8.75 kN

    Since the edge distance is deemed to be more than two times the bolt
    diameter, only one check is necessary.
    The Bearing Capacity of the column web at any Bolt is :

    d . t . pbs
    Pbs =
    1000
    =

    6.3.3.3

    12 7.2 487.5
    1000

    = 42.120 kN

    Column web bearing is safe

    Check 5 : Capacity of the Weld

    The worst load is encountered for Load Case : 1


    Bmax = 0.144 kN/mm
    The Capacity of weld is the lesser of :

    6.6.5.5

    Job Number
    Software Consultants (Pty) Ltd
    Internet: http://www.prokon.com
    E-Mail : mail@prokon.com

    Pw =
    =

    Client

    Calcs by

    0.5 . Aw. Ue
    1000

    0.5 4.2 480


    1000

    = 1.008 kN/mm
    Pw =
    =

    0.54 . Aw. Us
    1000

    0.54 4.243 450


    1000

    = 1.031 kN/mm

    Weld is safe

    Sheet

    Job Title

    Checked by

    Date

    Job Number
    Software Consultants (Pty) Ltd
    Internet: http://www.prokon.com
    E-Mail : mail@prokon.com

    Sheet

    Job Title
    Client

    Calcs by

    Checked by

    Date

    Bolt Forces
    Flexible End Plate Connection
    Ver W2.4.00 - 25 Mar 2008
    Title : Default Connection
    Created : 20/09/2016 23:31:48

    The bolt forces listed here are the forces that the column is exerting
    on the applicable bolt. X-forces are positive to the right, Y-forces are
    positive upwards.
    COLUMN BOLT FORCES (kN) FOR LOAD COMBINATION : 1
    BOLT ULTIMATE APPLIED LOAD SERVICE APPLIED LOAD
    Row
    Tensile
    Shear
    Tensile
    Shear
    --------------------------------------------------1
    2

    -2.50
    -2.50

    -8.75 ---------- ----------8.75 ---------- ----------

    You might also like