Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 826 views

    Compex

    Uploaded by

    Hakan Kuruoğlu
    IEC 60079-1 should be referenced for installing electrical equipment in an explosive atmosphere. Equipment certified as Ex ia IIB+H2 T4 can be used with the widest range of gases. The certificate marking PTB13ATEX1234U indicates the item is a certified component with special installation conditions that applies to a specific serial number. The ATEX Directive identifies the types of personnel competent to carry out electrical installations in explosive atmospheres. Equipment with an IP6X rating but no ATEX category or temperature can only be installed in zone 21 and 22. An area where an explosive gas/air mixture is unlikely during normal operation would typically be classified as Zone 2.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Compex

    Uploaded by

    Hakan Kuruoğlu
    826 views2 pages
    IEC 60079-1 should be referenced for installing electrical equipment in an explosive atmosphere. Equipment certified as Ex ia IIB+H2 T4 can be used with the widest range of gases. The certificate marking PTB13ATEX1234U indicates the item is a certified component with special installation conditions that applies to a specific serial number. The ATEX Directive identifies the types of personnel competent to carry out electrical installations in explosive atmospheres. Equipment with an IP6X rating but no ATEX category or temperature can only be installed in zone 21 and 22. An area where an explosive gas/air mixture is unlikely during normal operation would typically be classified as Zone 2.

    Original Description:

    compex

    Original Title

    compex

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    IEC 60079-1 should be referenced for installing electrical equipment in an explosive atmosphere. Equipment certified as Ex ia IIB+H2 T4 can be used with the widest range of gases. The certificate marking PTB13ATEX1234U indicates the item is a certified component with special installation conditions that applies to a specific serial number. The ATEX Directive identifies the types of personnel competent to carry out electrical installations in explosive atmospheres. Equipment with an IP6X rating but no ATEX category or temperature can only be installed in zone 21 and 22. An area where an explosive gas/air mixture is unlikely during normal operation would typically be classified as Zone 2.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    826 views2 pages

    Compex

    Uploaded by

    Hakan Kuruoğlu
    IEC 60079-1 should be referenced for installing electrical equipment in an explosive atmosphere. Equipment certified as Ex ia IIB+H2 T4 can be used with the widest range of gases. The certificate marking PTB13ATEX1234U indicates the item is a certified component with special installation conditions that applies to a specific serial number. The ATEX Directive identifies the types of personnel competent to carry out electrical installations in explosive atmospheres. Equipment with an IP6X rating but no ATEX category or temperature can only be installed in zone 21 and 22. An area where an explosive gas/air mixture is unlikely during normal operation would typically be classified as Zone 2.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Assessment Test Questions for Compex/Atex

    If electrical equipment is to be installed in an explosive atmosphere. What standard should


    be referenced?
    IEC 60079-14
    IEC 60079-10-1
    IEC 60079-17
    IEC 60079-1

    Which item of apparatus can be used with the widest range of gases?
    Ex db IIC T4
    Ex ia IIB+H2 T4
    Ex IIA T3
    Ex tD IIIC

    An item has the following certificate marking: PTB13ATEX1234U


    The item is a component
    Special conditions for use apply
    This is a serial number
    The item is certified to CE

    Which European standard identifies the types of person who need to be competent to carry
    out electrical installations?
    IEC/EN60079-14
    IEC/EN60079-10
    The ATEX Directive

    IEC/EN60079-4

    Equipment has an IP rating of IP6X, but no ATEX category and no external surface
    temperature. Where can the equipment be installed?
    It cannot be used in an explosive atmosphere.
    In zone 21 and 22 only
    In zone 20 and 21 only
    In Zone 1

    If an explosive gas/air mixture is UNLIKELY to occur in normal operation, what will the area
    classification typically be?
    Zone 2
    Zone 1
    Zone 0
    Zone 22

    You might also like