Coefficient of Coupling

REPORT ON CANDIDATES WORK IN THE
ADVANCED PROFICIENCY EXAMINATION

MAY/JUNE 2011
ELECTRICAL AND ELECTRONIC TECHNOLOGY
One question focused on the inductor and mutual inductance. For the most part, candidates displayed
knowledge of the inductor and were able to define the coefficient of coupling. Candidates experienced
difficulty calculating the energy stored and the coefficient of coupling for two coils. The maximum score
obtained was 19 from a possible 30 marks. About 29 per cent of those who attempted the question
scored in the 1120 mark range; 30 per cent scored in the 610 mark range, 36 per cent scored in the 1
5 mark range and 5 per cent either scored zero or did not attempt the question.
Mutual Inductance of Two Coils

In the previous tutorial we saw that an inductor generates an induced emf within itself as a result
of the changing magnetic field around its own turns, and when this emf is induced in the same
circuit in which the current is changing this effect is called Self-induction, ( L ). However, when
the emf is induced into an adjacent coil situated within the same magnetic field, the emf is said to
be induced magnetically, inductively or by Mutual induction, symbol ( M ). Then when two or
more coils are magnetically linked together by a common magnetic flux they are said to have the
property of Mutual Inductance.
Mutual Inductance is the basic operating principal of the transformer, motors, generators and
any other electrical component that interacts with another magnetic field. Then we can define
mutual induction as the current flowing in one coil that induces an voltage in an adjacent coil.
But mutual inductance can also be a bad thing as "stray" or "leakage" inductance from a coil can
interfere with the operation of another adjacent component by means of electromagnetic
induction, so some form of electrical screening to a ground potential may be required.
The amount of mutual inductance that links one coil to another depends very much on the
relative positioning of the two coils. If one coil is positioned next to the other coil so that their
physical distance apart is small, then nearly nearly all of the magnetic flux generated by the first
coil will interact with the coil turns of the second coil inducing a relatively large emf and
therefore producing a large mutual inductance value.
Likewise, if the two coils are farther apart from each other or at different angles, the amount of
induced magnetic flux from the first coil into the second will be weaker producing a much
smaller induced emf and therefore a much smaller mutual inductance value. So the effect of
mutual inductance is very much dependant upon the relative positions or spacing, ( S ) of the two
coils and this is demonstrated below.
Mutual Inductance between Coils
The mutual inductance that exists between the two coils can be greatly increased by positioning
them on a common soft iron core or by increasing the number of turns of either coil as would be
found in a transformer. If the two coils are tightly wound one on top of the other over a common
soft iron core unity coupling is said to exist between them as any losses due to the leakage of
flux will be extremely small. Then assuming a perfect flux linkage between the two coils the
mutual inductance that exists between them can be given as.
Where:
o is the permeability of free space (4..10-7)
r is the relative permeability of the soft iron core
N is in the number of coil turns
A is in the cross-sectional area in m2
l is the coils length in meters
Mutual Induction
Here the current flowing in coil one, L1 sets up a magnetic field around itself with some of these
magnetic field lines passing through coil two, L2 giving us mutual inductance. Coil one has a
current of I1 and N1 turns while, coil two has N2 turns. Therefore, the mutual inductance, M12 of
coil two that exists with respect to coil one depends on their position with respect to each other
and is given as:
Likewise, the flux linking coil one, L1 when a current flows around coil two, L2 is exactly the
same as the flux linking coil two when the same current flows around coil one above, then the
mutual inductance of coil one with respect of coil two is defined as M21. This mutual inductance
is true irrespective of the size, number of turns, relative position or orientation of the two coils.
Because of this, we can write the mutual inductance between the two coils as: M12 = M21 = M.
Hopefully we remember from our tutorials on Electromagnets that the self inductance of each
individual coil is given as:
and
Then by cross-multiplying the two equations above, the mutual inductance that exists between
the two coils can be expressed in terms of the self inductance of each coil.
giving us a final and more common expression for the mutual inductance between two coils as:
Mutual Inductance Between Coils
However, the above equation assumes zero flux leakage and 100% magnetic coupling between
the two coils, L 1 and L 2. In reality there will always be some loss due to leakage and position,
so the magnetic coupling between the two coils can never reach or exceed 100%, but can become
very close to this value in some special inductive coils. If some of the total magnetic flux links
with the two coils, this amount of flux linkage can be defined as a fraction of the total possible
flux linkage between the coils. This fractional value is called the coefficient of coupling and is
given the letter k.
Coupling Coefficient
Generally, the amount of inductive coupling that exists between the two coils is expressed as a
fractional number between 0 and 1 instead of a percentage (%) value, where 0 indicates zero or
no inductive coupling, and 1 indicating full or maximum inductive coupling. In other words, if
k = 1 the two coils are perfectly coupled, if k > 0.5 the two coils are said to be tightly coupled
and if k < 0.5 the two coils are said to be loosely coupled. Then the equation above which
assumes a perfect coupling can be modified to take into account this coefficient of coupling, k
and is given as:
Coupling Factor Between Coils
or
When the coefficient of coupling, k is equal to 1, (unity) such that all the lines of flux of one coil
cuts all of the turns of the other, the mutual inductance is equal to the geometric mean of the two
individual inductances of the coils. So when the two inductances are equal and L 1 is equal to L 2,
the mutual inductance that exists between the two coils can be defined as:
Example No1
Two inductors whose self-inductances are given as 75mH and 55mH respectively, are positioned
next to each other on a common magnetic core so that 75% of the lines of flux from the first coil
are cutting the second coil. Calculate the total mutual inductance that exists between them.
In the next tutorial about Inductors, we look at connecting together Inductors in Series and the
affect this combination has on the circuits mutual inductance, total inductance and their induced
voltages.

Coefficient of Coupling

Uploaded by

Copyright:

Available Formats

Coefficient of Coupling

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Coefficient of Coupling

Uploaded by

Copyright:

Available Formats

REPORT ON CANDIDATES WORK IN THE

ADVANCED PROFICIENCY EXAMINATION

Mutual Inductance of Two Coils

Mutual Inductance between Coils

Mutual Inductance Between Coils

Coupling Factor Between Coils

You might also like