ParallelShaftDrives Dimension Drawing For Cad

HUB CITY PARALLEL SHAFT DRIVES
PARALLEL SHAFTDRIVES
Introductory Information...................................................................... F-2
Pre-Selection Information.................................................................... F-3
Quick Selection Tables......................................................................... F-4, F5
Rating and Dimensions
Helical Ratio Multipliers.................................................................... F-6 to F-9
Model 22 - Single Reduction Speed Reducer........................... F-10, F-11
Model 230 - Single Reduction Speed Reducer......................... F-12, F-13
Model 85L - Single Reduction Speed Reducer......................... F-18, F-19
Model 95L - Single Reduction Speed Reducer......................... F-22, F-23
Model 95H - Single Reduction Speed Reducer........................ F-24, F-25
Model 52 - Double Reduction Speed Reducer......................... F-28, F-29
Model 83L & 83S - Double Reduction Speed Reducers........ F-30, F-31
F
Model 1 - Double Reduction Speed Reducer........................... F-34, F-35
Model HT100 - Shifting Transmission.......................................... F-50, F-51
SAE Standards......................................................................................... F-52, F-53
Factory Options....................................................................................... F-54
CALL: (605) 225-0360 FAX: (605) 225-0567 F-1

Parallel SHAFT Drives
Basic Specifications
Power ratings from 1/4 to 530 hp
Output Torque to 120,000 inch/lbs
Ratios from 1:1 through 70:1
Output Speeds 24 rpm to 2400 rpm
Standard Features
U
p to three input modes for integrating
with hydraulic or electric motors or for
externally coupled driving sources.
C
ast iron housing designed for superior
thermal conductivity provides rigid gear
and bearing support.
H
igh strength alloy case hardened gears
for greater wear life.
Alloy shafting for greater strength.
P
recision ball bearings or tapered roller
bearings for endurance and strength.
H
eavy duty industrial seals to keep
contaminants out.
Optional Features
Modified Standard and Custom Designs
O
ptional Output Bore Sizes for Shaft
Mount Versions Motorized Parallel
C
leanLine Washdown and BISSC Shaft Drives For More Shaft
Configurations
M
otors Produced by Marathon Electric Mounted Reducers
U
nique or Harsh Environment for High Efficiency, Reliability and
Adaptations Durability See PowerTorque
General or Definite Purpose Motors Shaft Mount
B
rake or Inverter Duty Motors, DC or Reducers Section G
Washdown Motors
& Poweratio 2000
M
otor/Gear Drive Package Incentives
Available, Consult Factory Compact Helical
Parallel Drives
Section J
F-2 CALL: (605) 225-0360 FAX: (605) 225-0567

Pre-Selection Information
General Design Features
Hub City parallel shaft speed reducers provide you with a Electric Motor Units Hub City speed reducers in this group
nearly unlimited degree of design flexibility in OEM are equipped with a NEMA C flange for
configurations, or for incorporation in existing systems. Up direct mounting to a flanged electric motor.
to three input modes provide for integration with hydraulic The electric motor shaft and reducer input
motors, electric motors, or for externally coupled driving pinion mate coaxially.
sources.
Units can be specified for torque to 122,361 lb.-in., horsepower

ratings to 530 H.P., and reduction ratios to 70:1, depending on
the model and AGMA class of operation required. The wide Backstops
range of ratios is facilitated by the availability of single and
double reduction designs. Optional backstops are offered at extra cost for applications
that require the prevention of reverse rotation. Backstops are
Hub City parallel-shaft speed reducers provide the advantages built-in to the high speed shaft module assembly. Backstops
of a sealed, integrated configuration compact and easily must be factory assembled. When ordering specify desired
planned into your systems with inherently accurate shaft direction of free rotation of the reducer output shaft as
alignment. A wide range of ratios and ratings offer a selection viewed facing the end of the shaft extension.
which can usually be utilized with the driven equipment. These
capabilities can also be extended where necessary by use of Backstops are not recommended for applications
external V-belts, chains, and other couplings. involving energy absorption and shock or torque loads in
excess of reducer ratings or on applications such as chair lifts,
All units are designed for long service under heavy-duty amusement rides, etc. where the safety of a person or property
conditions, and machined from high alloy gray iron or ductile is dependent on their function. On such applications, other
iron housing castings. The gear drives are equipped with ball, safety devices should be provided.
roller or tapered roller bearings, depending on position in the
gear train and on operating requirements. Units also include Backstops are designed to prevent rotation not more than
high strength high alloy case hardened gears, double lip seals, five times in an 8 hour period with a minimum of one minute
and high quality steel shafts and sleeves. in the over-running direction between each engagement. If
F
reversing operation is more frequent or over-running time is
Hub City provides adaptors for most units for both hydraulic less, the application should be referred to the factory.
and NEMA C Face electric motors, as well as all required
bushings, backstops, torque arms, and other accessories that NOTE:Lubricants with extreme pressure (EP) additives
may be required for most applications. Consult each individual should not be used in units with built-in backstop.
reducer dimension page for input styles available.
This catalog includes representative standard Hub City EFFICIENCY

shaft-mounted speed reducers; however, complete
engineering capabilities are available to you for development Helical or Spur Gearing and Ball or Tapered Roller Bearings
of modified or new designs. provide a drive with very high efficiency. The approximate
efficiency is 97.5% per gear stage.
Input Configuration Descriptions

How To Order
Shaft Input Units These speed reducers are designed for
external coupling through V-belts, chain drives, When ordering a Parallel Shaft Drive it is necessary to select
or other means. Overhung load data can be a model, gear ratio, input configuration and assembly style
provided on individual models. where applicable.
For shaft mounted units also specify output bore size.
Hydraulic Motor Units These speed reducers are provided Input configuration options:
with either a 2-bolt or 4-bolt mounting flange Shaft
for direct coupling to a hydraulic motor. Hydraulic (specify flange size and input bushing size)
The hydraulic motor shaft mates directly Electric(specify flange size and input bushing size)
with the reducer input pinion through a (see above for Input Configuration Descriptions)
spline or round key adaptor. A floating
adaptor accommodates any possible Not all input configurations are available on all models.
See individual model pages for input configurations available.
concentricity difference.
CALL: (605) 225-0360 FAX: (605) 225-0567 F-3

Quick Model Selection

Hub City Parallel Shaft Speed Reducers can be selected on the basis
of speed and torque or horsepower. Quick selection tables on the
SERVICE FACTORS
The ratings for gear drives in this manual are based on a service
following pages can be used with 1750 rpm input speed and uniform
factor of 1.00, for uniform load and uniform power source, up to
power source. Table 3 provides reducer selection by H.P. and output
10 hours of operation per day. For other operating conditions, the
speed. It also provides different AGMA load classifications designated
application horsepower or torque must be multiplied by the
for shaft mount reducers. Tables 4 and 5 provide selection by output
torque and output speed, for Class I service (1.00 S.F.). Conversion appropriate service factor, to determine the equivalent gear drive
factors for AGMA class II and III are provided below the tables. power rating. A gear drive should be selected with a rated capacity
For other input speeds, and specific rating data, refer to the unit rating equal to or greater than the equivalent rating.
tables for each model. AGMA Load Classification Numbers for Gearmotors and Shaft Mount
TABLE 1 SERVICE FACTORS Reducers are listed on pages A-5 and A-6. AGMA Load Classification
Driven Machine Numbers for Drives and Reducers are listed on pages A-7 and A-8.
Load Classification
Duration of Service Medium Heavy Table 1 designates recommended service factors for various
Prime Mover Per Day (1) Uniform Shock Shock conditions of load, power source, and duration of service.
Occasional 1/2 hr. * * 1.25 Table 2 designates load classification numbers for gearmotors and
Electric Intermittent 3 hrs. * 1.00 1.50
shaft mount reducers with uniform power source, and indicates the
Motor 3 - 10 hours 1.00 1.25 1.75
Over 10 hours 1.25 1.50 2.00 relationship between service factors and load classification numbers.
Electric Motor Occasional 1/2 hr. * 1.00 1.50 Refer to page A-2 for further information and cautions on the
With Frequent Intermittent 3 hrs. 1.00 1.25 1.75 selection of proper service factors.
Starts and 3 - 10 hours 1.25 1.50 2.00
Stops (2) Over 10 hours 1.50 1.75 2.25 Table 2 LOAD CLASSIFICATION NUMBERS
Multi-Cylinder Occasional 1/2 hr. * 1.00 1.50 Load class Up to 3 hrs. 3 to 10 hrs. Over 10 hrs.
Internal Intermittent 3 hrs. 1.00 1.25 1.75 (S.F.) Total Operation Total Operation Total Operation
Combustion 3 - 10 hours 1.25 1.50 2.00 Per Day Per Day Per Day
Engine Over 10 hours 1.50 1.75 2.25 I Moderate Uniform
Single Cylinder Occasional 1/2 hr. 1.00 1.25 1.75 (1.0) Shock Load Load
Internal Intermittent 3 hrs. 1.25 1.50 2.00 II Heavy Moderate Uniform
Combustion 3 - 10 hours 1.50 1.75 2.25 (1.4) Shock Load Shock Load Load
Engine Over 10 hours 1.75 2.00 2.50 III Heavy Moderate
Reversing Service Application Consult Factory (2.0) Shock Load Shock Load
*U
nspecified service factors should be 1.0 or as agreed upon by CLASS I CLASS II CLASS III
HP Output Output Output
user and manufacturer.
RPM Model RPM Model RPM Model
Explanatory Notes
1. Time specified for intermittent and occasional service refers to total operating 340-400 1,83,85L 331-400 89 380-400 3,95L
time per day. 20 321-339 2 260-330 3,95L 212-379 4
2. Term frequent starts and stops refers to more than 10 starts per hour. 219-320 89 147-259 4 100-211 5
174-218 3,95L 66-146 5 70.99 6
Table 3 Reducer Selection: H.P. / Output Speed 94-173 4 49-65 6 42-69 75
45-93 5 30-48 75
CLASS I CLASS II CLASS III CLASS I CLASS II CLASS III
34-44 6
HP Output Output Output HP Output Output Output
22-33 75
RPM Model RPM Model RPM Model RPM Model RPM Model RPM Model
1/4 6-400 52 8-400 52 13-400 52 208-400 52 320-400 52 139-400 1,83,85L 290-400 89 348-400 3,95L 278-400 4
1/3 10-400 52 13-400 52 20-400 52 5 61-207 1,83,85L 92-319 1,83,85L 128-138 2 25 236-289 3,95L 192-347 4 127-277 5
15-400 52 20-400 52 30-400 52 57-60 2 86-91 2 88-137 89 123-235 4 88-191 5 93-126 6
1/2 6-14 1,83,85L 8-19 1,83,85L 10-29 1,83,85L 52-56 89 60-85 89 69-87 3,95L 58-122 5 64-87 6 52-92 75
23-400 52 33-400 52 48-400 52 33-51 3,95L 48-84 3,95L 38-68 4 43-57 6 37-63 75
3/4 8-22 1,83,85L 12-32 1,83,85L 15-47 1,83,85L 20-32 4 29-47 4 21-37 5 26-42 75
11-14 89 11-19 5 15-28 5 16-30 6
372-400 89 235-400 4 344-400 4
31-400 52 43-400 52 64-400 52 12-14 6 10-15 75
1 12-30 1,83,85L 16-42 1,83,85L 22-63 1,83,85L 360-400 52 157-400 1,83,85L 223-400 1,83,85L 30 284-371 3,95L 111-234 5 164-343 5
7-1/2 158-283 4 79-110 6 120-163 6
7-11 89 11-15 89 15-21 89
102-359 1,83,85L 150-156 2 210-222 2
12-14 3,95L 96-101 2 98-149 89 146-209 89 72-157 5 46-78 75 66-119 75
48-400 52 71-400 52 104-400 52 64-95 89 78-97 3,95L 117-145 3,95L 53-71 6 59-65 8
1-1/2 17-47 1,83,85L 24-70 1,83,85L 32-103 1,83,85L 51-63 3,95L 44-77 4 64-116 4 32-52 75
12-16 89 22-23 2 22-31 89 31-50 4 22-43 5 31-63 5 360-400 3,95L 235-400 4 234-400 5
10-12 3,95L 16-21 89 15-21 3,95L 16-30 5 18-21 6 24-30 6
40 222-359 4 111-234 5 170-233 6
13-15 3,95L 10-14 4 12-15 6 11-17 75 14-23 75
67-400 52 103-400 52 155-400 52 147-400 1,83,85L 217-400 1,83,85L 320-400 1,83,85L 106-221 5 79-110 6 97-169 75
2 22-66 1,83,85L 33-102 1,83,85L 44-154 1,83,85L 10 138-146 2 210-216 2 300-319 2 75-105 6 46-78 75 59-96 8
15-21 89 30-32 2 42-43 2 92-137 89 143-209 89 208-299 89 43-74 75
7-14 4 22-29 89 30-42 89 72-91 3,95L 113-142 3,95L 164-207 3,95L 294-400 4 240-300 5 310-400 5
18-21 3,95L 22-29 3,95L 42-71 4 61-112 4 89-163 4 50 222-359 4 111-234 5 170-233 6
10-17 4 15-21 4 22-41 5 31-60 5 45-88 5 100-135 6 86-146 75 130-221 75
8-14 5 17-21 6 24-30 6 33-44 6
56-99 75 59-85 8 59-129 8
113-400 52 172-400 52 244-400 52 10-16 75 15-23 75 21-32 75
3 33-112 1,83,85L 50-171 1,83,85L 72-243 1,83,85L 239-400 1,83,85L 362-400 1,83,85L 342-400 89
231-400 5 350-400 5 370-400 6
23-32 89 34-49 89 68-71 2 15 224-238 2 340-361 2 271-341 3,95L 75 164-230 6 252-349 6 210-369 75
19-22 3.95L 28-33 3,95L 46-67 89 156-223 89 239-339 89 152-270 4 95-163 75 146-251 75 115-209 8
12-18 4 16-27 4 37-45 3,95L 121-155 3,95L 122-237 3,95L 68-151 5 306-400 6 270-300 75 339-400 8
6-17 5 8-15 5 23-36 4 66-120 4 101-121 4 50-67 6
125
182-305 75 115-269 8
12-22 5 33-65 5 48-100 5 30-49 75 382-400 6 343-400 75 339-400 8
25-32 6 37-47 6 150
225-381 75
16-24 75 21-36 75
NOTE: The AGMA Load classes provide for a 200 316-400 75 339-400 8
momentary or starting load of 2.0 times for Class I, 2.8 for class II and 4.0 for Class III 290 339-400 8
F-4 CALL: (605) 225-0360 FAX: (605) 225-0567

Quick Model Selection

Table 4 Output Torque Selection
Single Reduction Speed Reducers
Output Rotation Opposite Input Rotation
(Selections Based on 1750 Input For other Input Speeds see Rating Tables)
(Torque Given in Lb.-In. Max., for AGMA Class I Service*)
OUTPUT MODEL NUMBERS
SPEED Nominal
(RPM) Ratio RM1 RM2 RM3 22 230 240 280 85L 200 95L 95H 290
1750 1:1 NA NA NA 919 NA NA 3179 NA 5589 NA NA 14610
1150 1.5:1 NA NA NA 1100 NA NA NA NA 6917 NA NA 17250
875 2:1 347 424 1412 1237 NA NA NA 2800 7336 4962 10750 19590
690 2.53:1 NA NA NA 1237 NA NA NA NA NA NA NA NA
583 3:1 384 433 1357 NA 713 NA NA 3290 6602 5657 12100 21535
438 4:1 419 511 1621 NA 545 1214 NA 3534 6288 6100 12500 24000
350 5:1 428 529 1836 NA 437 1310 NA 3740 NA 6380 11400 23335
282 6.2:1 NA NA NA NA NA 1084 NA 3866 NA 6600 NA NA
250 7:1 NA 664 NA NA NA NA NA NA NA NA NA NA
240 7.3:1 NA NA NA NA NA 917 NA NA NA NA NA NA
233 7.5:1 419 NA 1538 NA NA NA NA NA NA NA NA NA
219 8:1 NA NA NA 851 NA NA NA NA NA NA NA NA
* For AGMA ClassII Service, divide torque ratings by 1.4; for Class III, by 2.0.
Table 5 Output Torque Selection

Double Reduction Speed Reducers
Output Rotation Same As Input Rotation
(Selections Based on 1750 Input For other Input Speeds see Rating Tables)
F
(Torque Given in Lb.-In. Max., for AGMA Class I Service*)
OUTPUT MODEL NUMBERS

SPEED Nominal
(RPM) Ratio 52 83L 1 2 89 3 4 5 6 75 8
350 5:1 NA NA NA 3871 NA 6452 8536 18968 24935 NA 53002
290 6:1 NA 3833 NA NA 5475 NA NA NA NA NA NA
218 8:1 NA 4025 NA NA 5829 NA 11314 NA NA NA NA
175 10:1 NA NA 4241 4395 6013 7336 NA 21649 28297 NA 66871
145 12:1 NA 4318 NA NA 6196 NA 12136 NA NA NA NA
117 15:1 NA NA 4485 4651 NA 7813 NA 22969 30000 76851 97235
110 16:1 1667 NA NA NA NA NA 12714 NA NA NA NA
88 20:1 1765 4790 4873 5093 NA NA 13395 24957 32597 NA NA
70 25:1 1882 NA 5161 5076 NA 8460 14265 24873 32487 80624 104607
58 30:1 NA NA NA NA NA 9191 14644 26800 34909 81506 107060
44 40:1 NA NA NA NA NA 9532 NA NA NA NA NA
35 50:1 NA NA 5559 5803 NA NA NA 28406 37101 NA NA
30 60:1 NA NA NA 5824 NA NA NA NA NA NA NA
24 70:1 NA NA NA 5859 NA NA NA NA NA NA NA
* For AGMA ClassII Service, divide torque ratings by 1.4; for Class III, by 2.0.
CALL: (605) 225-0360 FAX: (605) 225-0567 F-5

Models RM1, RM2, RM3 - Single Reduction

Features
n Three Cast Iron Models, Two Aluminum Models, One Stainless Steel
Model ( See Section O)
n Ratios available from 2:1 to 7.5:1
n Can be used as reducer or increaser.
n Provides additional reduction capability when mounted onto Helical

Gear Reducer or Worm Gear Reducer
n C-flange or solid input shaft.
n Helical gearing.
n Double lip seals.
n Base mounting available.
n Permanently lubricated at factory.
Model Nomenclature Example

A RM 1 Q 2.056 56C - 56C
Output Frame Size
Housing Material
lank : Cast Iron
B Input Frame Size
A : Aluminum
SS : Stainless Steel Exact Ratio
(See Section O)
CPA : Cleanline Platinum Input Option
Plus Aluminum Q : Quill style C-Face INGLE REDUCTION UNITS PROVIDE OPPOSITE DIRECTION
S
C : Coupling style C-Face OUTPUT ROTATION
(See Section O)
S : Shaft input
Ratio Multiplier Unit Size

1, 2, 3
RM1 RATINGS @1750 RPM INPUT (48, 56 Cast Iron or Aluminum Housing)
RATIO OUTPUT RPM INPUT HP OUTPUT TORQUE MAX LS OHL
2.056 851 4.69 347 222
2.929 598 3.64 384 265
4.000 438 2.91 419 300
5.111 342 2.33 428 300
7.462 235 1.56 419 300
RM2 RATINGS @1750 RPM INPUT (56, 140 Cast Iron or Aluminum Housing)
56C OUTPUT 140TC OUTPUT
RATIO OUTPUT RPM INPUT HP OUTPUT TORQUE MAX LS OHL MAX LS OHL
2.000 875 6.00 424 358 358
2.913 601 4.21 433 375 434
4.000 438 3.63 511 375 455
5.000 350 3.00 529 375 455
7.182 244 2.62 664 375 455
RM3 RATINGS @1750 RPM INPUT (180, 210, 250 Available in Cast Iron Housing Only)
RATIO OUTPUT RPM INPUT HP OUTPUT TORQUE MAX LS OHL
2.000 875 20.00 1412 900
2.964 590 12.98 1357 900
4.045 433 11.35 1621 900
5.167 339 10.07 1836 900
7.538 232 5.80 1544 900
F-6 CALL: (605) 225-0360 FAX: (605) 225-0567

models RM1 & RM2 - single reduction

DIMENSIONS SHOWN ARE FOR REFERENCE ONLY.
CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST.
cast iron housing
Model RM1
TP, (4) EQ. SP.
ON AJ BOLT CIRCLE
BD DIA. 4.33
OD DIA.
AK DIA. BORE DIA. 2.06
1.20
1.909 1.50
.625 DIA.
2.81 KWY .188 x .094

.38
2.50 2.47
NEMA 56C OUTPUT FACE
5.00 4.83
Input
Frame AJ AK BD OD TP Bore Input KWY.** weight (lbs.)
48C 3.75 3.00 3.88 4.36 .28 .500 1/8 x 1/16 19

RM1Q
56C 5.88 4.50 5.88 6.64 .41 .625 3/16 x 3/32 19
** keyway width by depth.
Model rm2
BD DIA.
RM2Q
TP, (4) EQ. SP.
ON AJ BOLT CIRCLE
RQ
N
RM2C
MC F
OD DIA. NEMA 56C/140TC
OUTPUT FACE
AK DIA. BORE
DIA. SEE "TXQ"
FACE
2.362 1.50
Single Reduction
RM2S
S DIA.
N 5.61
KWY .188 x .094 1.76
1.44
3.25 R. 2.82 H 1.31
MQ
.625 DIA.
Input-Output WEIGHT
Frame AJ AK BD TP Bore OD MQ N MC RQ IP KWY.* H S Dia. OP KWY.* (lbs)
56C-56C 5.88 4.50 5.88 .41 .625 6.64 5.25 .38 7.86 4.75 .188 x .094 2.06 .625 .188 x .094 22
RM2Q
56C-140TC 5.88 4.50 5.88 .41 .625 6.64 5.25 .38 7.86 4.75 .188 x .094 2.13 .875 .188 x .094 22
RM2C
140TC-56C 5.88 4.50 5.88 .41 .875 6.64 5.25 .38 7.86 4.75 .188 x .094 2.06 .625 .188 x .094 22
RM2S
140TC-140TC 5.88 4.50 5.88 .41 .875 6.64 5.25 .38 7.86 4.75 .188 x .094 2.13 .875 .188 x .094 22
*keyway width by depth
Note: All dimensions are for reference only. Contact factory for certified dimensions.
CALL: (605) 225-0360 FAX: (605) 225-0567 F-7

model RM3 - single reduction

cast iron housing
NEMA 180TC/210TC/250TC
BD DIA. AK DIA. OUTPUT FACE
TP, (4) EQ. SP. RQ
ON AJ BOLT CIRCLE BORE
DIA.
RM3Q 2.874 T
S DIA.
N1
4.25 R. 4.03 AH
MQ1
MC1
NC1
10.27
3.61
2.17
SEE "RM3Q" 1.91
FACE
.250 x .125
RM3C 1.250 DIA. RM3S
Input-Output WEIGHT
Frame** AJ AK BD TP Bore MQ1 N1 MC1 NC1 RQ IP KWY.* AH S Dia. OP KWY.* (lbs)
180TC-180TC 7.25 8.50 9.00 .53 1.125 7.76 .50 13.45 .50 7.25 .250 x .125 2.62 1.125 .250 x .125 x 1.80 45
RM3Q 210TC-180TC 7.25 8.50 9.00 .53 1.375 7.76 .50 13.45 .50 7.25 312 x .156 2.62 1.125 .250 x .125 x 1.80 45
250TC-180TC 7.25 8.50 9.00 .53 1.625 8.32 .50 14.01 .50 7.65 .375 x .188 2.62 1.125 .250 x .125 x 1.80 45
180TC-210TC 7.25 8.50 9.00 .53 1.125 7.76 .50 13.45 .50 7.25 .250 x .125 3.12 1.375 .312 x .156 x 2.63 45
RM3C 210TC-210TC 7.25 8.50 9.00 .53 1.375 7.76 .50 13.45 .50 7.25 .312 x .156 3.12 1.375 .312 x .156 x 2.63 45
250TC-210TC 7.25 8.50 9.00 .53 1.625 8.32 .50 14.01 .50 7.65 .375 x .188 3.12 1.375 .312 x .156 x 2.63 45
180TC-250TC 7.25 8.50 9.00 .53 1.125 7.76 .50 13.45 .50 7.25 .250 x .125 3.75 1.625 .375 x .188 x 3.00 45
RM3S 210TC-250TC 7.25 8.50 9.00 .53 1.375 7.76 .50 13.45 .50 7.25 .312 x .156 3.75 1.625 .375 x .188 x 3.00 45
250TC-250TC 7.25 8.50 9.00 .53 1.625 8.32 .50 14.01 .50 7.65 .375 x .188 3.75 1.625 .375 x .188 x 3.00 45
* keyway width by depth
**56C and 140TC available for input flange only. 180TC/210TC input flange shown.
Note: All dimensions are for reference only. Contact factory for certified dimensions.
MOUNTING BASE FOR RATIO MULTIPLIERS
CD
M
N
D H DIA.
(4) HOLES
0 B L V G X
J F
A
Part Weight
Output A B CD D F G H J X L M N O V X No. (lbs)
RM1 56C 7.50 6.13 1.909 4.250 5.25 2.63 .41 4.31 .25 .56 7.50 6.16 3.06 .25 .25 0279-00552 2
56C 7.50 6.13 2.362 4.250 5.25 2.63 .41 4.31 .25 .56 7.50 6.16 3.06 .25 .25
RM2 0279-00552 2
140TC 7.50 6.13 2.362 4.250 5.25 2.63 .41 4.31 .25 .56 7.50 6.16 3.12 .25 .25
180TC 9.50 7.38 2.874 5.000 7.00 3.50 .53 5.25 .25 .63 9.44 7.88 3.88 .25 .25
RM3 210TC 9.50 7.38 2.874 5.000 7.00 3.50 .53 5.25 .25 .63 9.44 7.88 4.38 .25 .25 0279-00553 3
250TC 9.50 7.38 2.874 5.000 7.00 3.50 .53 5.25 .25 .63 9.44 7.88 5.00 .25 .25
F-8 CALL: (605) 225-0360 FAX: (605) 225-0567

models ARM1Q & ARM2Q - single reduction

aluminum housing
Model ARM1Q
ARM1Q
AK DIA.
BD DIA.
B.C. AJ BF(4)HOLES
EQ. SPCD.
4.82 O
BF1(2) BORE DIA.
EQ. SPCD.
1.40
1.91
1.50
T DIA.
.38
OUTPUT KEYW
R3.25
2.73
5.55
Frame Input Input Output WEIGHT

Style Combinations AJ AK BD BF BF1 O T Bore Keyway Keyway (lbs)

48CZ-56C 3.75 3.00 4.36 0.28 1/4-20 UNC 2.06 0.625 0.50 1/8 X 1/16 3/16 x 3/32 9.5
ARM1Q
56C-56C 5.88 4.50 6.64 0.41 3/8-16 UNC 2.06 0.625 0.63 3/16 X 3/32 3/16 x 3/32 9.5
Model ARM2
BD DIA.
ARM2Q
B.C. AJ BF(4) HOLES
EQ. SPCD. BD DIA. ARM2C
AK DIA. BORE DIA. 4.62
B.C. AJ BF(4) HOLES
8.13
BF1(2) O EQ. SPCD.
EQ. SPCD. AK DIA.
F
2.36 BF1(2) O
1.50
EQ. SPCD.
T DIA. 2.36
.38 1.50
R3.25 OUTPUT KEYWAY
T DIA.
.38
2.91
R3.25 INPUT OUTPUT KEYWAY
5.85 KEYWAY
ARM2S
5.77 O
1.76
1.41
2.36 1.50
INPUT KEYWAY
T DIA.
OUTPUT KEYWAY
R3.25
Frame Input Input Output WEIGHT

Style Combinations AJ AK BD BF BF1 O T Bore Keyway Keyway (lbs)
ARM2Q 140TC-56C 5.88 4.50 6.64 0.41 3/8-16 UNC 2.06 0.625 0.63 3/16 X 3/32 3/16 x 3/32 11.5
ARM2C
140TC-140TC 5.88 4.50 6.64 0.41 3/8-16 UNC 2.125 0.625 0.88 3/16 X 3/32 3/16 x 3/32 11.5
ARM2S
See Page F-8 for Foot Mounting Kits.
CALL: (605) 225-0360 FAX: (605) 225-0567 F-9

Model 22 - Single Reduction

Features
n Rugged cast iron housing designed for rigid gear and
bearing support.
n Alloy shafting for greater strength.
n Tapered roller bearings for endurance and strength.
n Choice of four (4) standard gear ratios.

n Heat treated alloy steel gearing for strength and long wear life.
n Heavy-duty industrial seals to keep lubricant in and dirt out.
n Shaft mount units available. (Style SO.)
n Foot mount kits available. Part Number 0229-00026.
n HUB CITY lubricant recommended. (Refer to Section R.)
SINGLE REDUCTION UNITS PROVIDE OPPOSITE DIRECTION

OUTPUT ROTATION
Rating Table
INPUT RATIOS
RPM 1:1 1.5:1 2:1 2.53:1
INPUT HORSEPOWER 26.3 21.2 17.7 14
1750 OUTPUT RPM. 1750 1250 875 692
OUTPUT TORQUE IN. LBS. 919 1111 1237 1237
INPUT HORSEPOWER 18.9 15 12.3 9.9
1150 OUTPUT RPM 1150 767 575 455
INPUT HORSEPOWER 15.3 12 10 7.9
850 OUTPUT RPM 850 567 425 336
INPUT HORSEPOWER 12.9 10.2 8.5 6.9
690 OUTPUT RPM 690 460 345 273
100 OUTPUT RPM 100 67 50 40
3-15/16
3-11/16 1-31/32
1-1/2 21/64 DIA. (4)
1/8
FOOTMOUNTINGKIT 1/2
MUSTBEORDEREDINADDITIONTODRIVE
IFREQUIRED.
PART NO. 0229-00026 3
F-10 CALL: (605) 225-0360 FAX: (605) 225-0567


5-3/8
2-11/16
5
8-1/2 1-5/8 R TYP.
AS CAST 20
4-1/4 2-1/2
2-1/2 R
2-1/2
1/4 X 1/8 KEYWAY 3-1/8

1-31/32 EFF. LGTH. 2-11/16
1.000
.998 1.250 8-3/8 3.000 C.D.
1.248
1-1/2 9-1/4
1/4 X 1/8 KEYWAY
1-31/32 EFF. LGTH.
3/8 NPT (4)
2-1/2
31/32
2-1/2 R 20
1-15/16 3-1/8 5/16 DIA. BOLT
6-1/4
3-1/2
1.000
1.002
STYLE SO
BORE DIMENSIONS
FOR LUBRICATION AND INSTALLATION
INSTRUCTIONS - REFER TO SECTION R
F
1/4 X 1/8 KEYWAY
1-7/8 DRYSHIPPING WEIGHT 24 LBS.

3-3/4
Single Reduction
Standard Styles Available INDICATES HIGH SPEED SHAFT. OTHER

STYLES AVAILABLE.
STYLE A STYLE C STYLE DO STYLE SO
CONSULT FACTORY FOR VERTICAL SHAFT LUBRICATION RECOMMENDATIONS

INPUT SHAFT CAN BE ROTATED IN EITHER DIRECTION
CALL: (605) 225-0360 FAX: (605) 225-0567 F-11


Features
bearing support.
n Heat treated alloy steel pinion and alloy cast iron gear
for strength and long life.
n Needle bearings on high speed shaft. Bronze bushings
on low speed shaft.
n Choice of three (3) gear ratios.
n HUB CITY lubricant recommended. (Refer to Section R)
INGLE REDUCTION UNITS PROVIDE OPPOSITE DIRECTION

S
OUTPUT ROTATION
Rating Table
INPUT RATIOS
RPM 3.11:1* 4.21:1* 5:1
INPUT HORSEPOWER 6.8 3.9 2.5
1750 OUTPUT RPM 583 438 350
OUTPUT TORQUE IN. LBS. 713 545 437
1150 OUTPUT RPM 383 288 230
850 OUTPUT RPM 283 213 170
690 OUTPUT RPM 230 173 138
INPUT HORSEPOWER .5 .4 .2
100 OUTPUT RPM 33 25 20
*MFG. TO ORDER CONSULT FACTORY FOR PRICE AND DELIVERY.
F-12 CALL: (605) 225-0360 FAX: (605) 225-0567

1-15/32 1-15/32
1-3/8
3/16 X 3/32 KEYWAY 1-3/8
1-7/32 EFF. LGTH. 1-15/16 31/32
31/32 31/32 1/4 NPT (2)
1-3/4 2-5/32
.750
.749 3.681
1/2 1.000 C.D.
2 .997 2-11/16 2 10
2-9/16
3/8 DRILL (2) 4 1/8
AT 90
3-1/4
1-1/4
3-13/16 5-5/16 2-23/32 2-23/32
4-1/8 1/4 DIA. BOLT
9-1/8
8-1/4
F
DRYSHIPPING WEIGHT 23 LBS.

Single Reduction
STYLES AVAILABLE.
STYLE A STYLE C STYLE DO

CALL: (605) 225-0360 FAX: (605) 225-0567 F-13


Features
bearing support.
n Choice of five (5) gear ratios.
n Heat treated alloy steel pinion and alloy cast iron gear for strength
and long wear life.
n HUB CITY lubricant recommended. (Refer Section R)

OUTPUT ROTATION
Rating Table
INPUT RATIOS
RPM 3.95:1* 5:1 6.2:1* 7.3:1* 8:1
INPUT HORSEPOWER 8.8 7.5 5 3.6 3.05
1750 OUTPUT RPM 443 350 282 240 219
OUTPUT TORQUE IN. LBS. 1214 1310 1084 917 851
INPUT HORSEPOWER 7 5.5 3.5 2.5 2.1
1150 OUTPUT RPM 291 230 185 158 144
INPUT HORSEPOWER 5.50 4.2 2.7 1.75 1.7
850 OUTPUT RPM 215 170 137 116 106
INPUT HORSEPOWER 4.5 3.3 2.2 1.7 1.3
690 OUTPUT RPM 175 138 111 95 86
INPUT HORSEPOWER .85 .7 .5 .35 .2
100 OUTPUT RPM 25 20 16 14 13
F-14 CALL: (605) 225-0360 FAX: (605) 225-0567


1-15/16 3-7/16 3-7/16 1-15/16
9-13/16
1-15/16 1-15/16
3-3/4
1-7/8
1/2 NPT (4)

3
.7505 4
.7495
13/16 5.451
1-15/16
C.D.
2 1.375 4-3/16
3/16 X 3/32 KEYWAY 1.372
1-7/32 EFF. LGTH. 13-7/16
2-3/4
3-13/16
5-13/16
13/32 DRILL (2)
AT 90
5/16 DIA. BOLT

1-1/4 1-9/16
3-13/16 3-13/16
2-1/2 5-13/16
11-5/8

INSTRUCTIONS - REFER TO SECTION R F
Single Reduction
Standard Styles Available
INDICATES HIGH SPEED SHAFT. OTHER

STYLE A STYLE C
STYLES AVAILABLE.

CALL: (605) 225-0360 FAX: (605) 225-0567 F-15


Features
bearing support.
n Helical gears for greater strength and lower noise level.

OUTPUT ROTATION
Rating Table
INPUT RATIO
RPM 1:1
INPUT HORSEPOWER 91
1750 OUTPUT RPM 1750
OUTPUT TORQUE IN. LBS. 3179
INPUT HORSEPOWER 67
1150 OUTPUT RPM 1150
INPUT HORSEPOWER 52
850 OUTPUT RPM 850
INPUT HORSEPOWER 44
690 OUTPUT RPM 690
INPUT HORSEPOWER 8
100 OUTPUT RPM 100
F-16 CALL: (605) 225-0360 FAX: (605) 225-0567


7-13/16
3-29/32
2-15/32 2-15/32
3-1/4
10-1/4
5-1/8 1-1/32 1-1/32
2-7/8 1-11/16
1-7/16
2-15/32
3-1/32*
1.250 * 3-29/32
1.248 2-3/4
2-7/8
1-1/4
5.750
1/4 X 1/8 KEYWAY * C.D.
13-9/16
2-13/32 EFF. LGTH.
1-1/4
2-7/8
* DIMENSIONS
TYPICAL ALL
SHAFT EXTENSIONS 2-3/4
2-15/32
5/16 DIA. BOLT 1-11/16
F
3-1/4
1/4 NPT (4)

Single Reduction

STYLES AVAILABLE.
STYLE A STYLE C STYLE DO

CALL: (605) 225-0360 FAX: (605) 225-0567 F-17

Model 85L Single Reduction

Features
bearing support.
n Alloy shafting and sleeves for greater strength.
n Ball bearings on all shafts.
n Choice of five (5) standard ratios.
n Shaft mount design for direct mounting on the drive shaft of
equipment to be driven.
n Unit may be operated as a speed increaser or speed reducer.

S
OUTPUT ROTATION
Rating Tables
SPEED REDUCER RATIOS
Input
RPM 2.04:1 3.12:1 4.00:1 5.00:1 6.09:1
Input Horsepower 38.5 29.6 24.8 21.0 17.8
1750 Output RPM 858 561 438 350 287
Output Torque In. Lbs. 2800 3291 3534 3740 3866
1150 Output RPM 564 369 288 230 189
850 Output RPM 417 272 213 170 140
690 Output RPM 338 221 173 138 113
100 Output RPM 49.0 32.0 25.0 20.0 16.4
SPEED INCREASER RATIOS

Input
RPM 1:2.04 1:3.12 1:4.00 1:5.00 1:6.09
Input Horsepower 49.4
1000 Output RPM 2043
Output Torque In. Lbs. 1524
Input Horsepower 42.7 44.7
850 Output RPM 1737 2650
Output Torque In. Lbs. 1551 1064
540 Output RPM 1103 1683 2160 2700 3289
300 Output RPM 613 935 1200 1500 1827
100 Output RPM 204 312 400 500 609
F-18 CALL: (605) 225-0360 FAX: (605) 225-0567


3-1/2
3/8 3-1/8 2-9/16
T KEYWAY 29/64 DIA. HOLE
1-3/4 EFF. LGTH.
S 7/8
2-1/2
7-7/32
1-5/8
3.960
C.D.
5/8 1/2 X 1/8
KEYWAY
10-27/32 SHAFT MOUNTED UNITS

REQUIRE TORQUE ARMS.
TORQUE ARM KITS ARE
1-5/8 AVAILABLE SEE PAGE F-53.
1.9375
1.9395
4-3/8
1/4 NPT (2) ADDITIONAL RATIOS,
2-7/16 OUTPUT BORES AND INPUT BORES
ARE AVAILABLE
1/8 NPT (2) CONSULT FACTORY.
17/32 5/16 DIA. BOLT
TYP. 4-3/8
4
8-3/4

DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. INSTRUCTIONS - REFER TO SECTION R
E CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST.
F
DRY SHIPPING WEIGHT 40 LBS.
G
M M M M
D
F P P P
SEE CHART FOR

SAE A-2
Single Reduction
1-3/8 SAE A-2CL2000 SAE B-4 NEMA 56C (QTY) J HOLES ON K B.C.
SAE A-2CL
NEMA 182TC FOR EACH FLANGE SIZE
SAE B-2
H
HIGH SPEED SHAFT DIMENSIONS
RATIO S DIA. T KEYWAY
2:1, 3:1, 4:1 & 5:1 1.000/.998 1/4 X 1/8
6:1 .875/.874 3/16 X 3/32
OPTIONAL LOW SPEED INPUT BUSHING SIZES

BORE SIZES AVAILABLE
D
1, 1-1/8, 1-3/16, 1-1/4, 1-3/8, 1-7/16 . 625 DIA. - 3/16 X 3/32 KW 1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
1-1/2, 1-5/8, 1-11/16, 1-3/4, 1-13/16, .875 DIA. - 3/16 X 3/32 KW 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE
1-7/8, 2, 1-3/8-6B Spl, 1-3/8-21T Spline
1.000 DIA. - 1/4 X 1/8 KW 1.250 DIA. - 5/16 X 1/8 KW 13T - 16/32 D.P. SPLINE 21T - 16/32 D.P. SPLINE
COUNTERBORE (QTY) J B.C. DIA.

FLANGE E G H
F HOLES K M P
A-2 1-7/16 3.251 / 3.253 5/16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16
A-2CL 1-7/16 3.251 / 3.253 3/16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16
A-2CL2000 1-13/16 3.251 / 3.253 13/32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2
B-2 1-7/16 4.001 / 4.003 7/16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
B-4 1-7/16 4.001 / 4.003 7/16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8
56C 1-5/8 4.502 / 4.504 5/16 5/8 (4) 13/32 DIA. 5-7/8 6-9/16 --
182TC 2-7/16 8.502 / 8.505 5/16 1-7/16 (4) 17/32 DIA. 7-1/4 9-1/8 --
CALL: (605) 225-0360 FAX: (605) 225-0567 F-19


Features
bearing support.
n Choice of five (5) standard gear ratios.
n Ductile iron feet provide rigid mounting base.
n Shaft mount units available. (Style SO.)
S
OUTPUT ROTATION
Rating Table
RATIOS
INPUT 1:1 1.5:1 2:1 3:1 4:1
RPM HELICAL HELICAL HELICAL HELICAL HELICAL
INPUT HORSEPOWER 160 132 105 63 45
1750 OUTPUT RPM 1750 1167 875 583 438
1150 OUTPUT RPM 1150 767 575 383 288
850 OUTPUT RPM 850 567 425 283 213
690 OUTPUT RPM 690 460 345 230 173
INPUT HORSEPOWER 13 10 8 4.8 3.5
100 OUTPUT RPM 100 67 50 33 25
F-20 CALL: (605) 225-0360 FAX: (605) 225-0567


6-7/8
1-3/32 1-3/32
5-3/8
3-3/16 3-3/16
2-11/16 25/32 25/32
5/16 DIA. BOLT
1/2 DIA. HOLE (4) 2-1/16

3-29/32
3-7/16
7-13/16 5-1/4
5.424
C.D.
1.500* 14-27/32
1.498 3-13/32
1-1/4
3-19/32
2-1/2* 4-1/4
* 3/8 X 3/16 KEYWAY 5-1/2
1-3/4 EFF. LGTH.
2-19/32* 1-15/32
1-7/16
3-19/32 3-19/32
2-7/8 * DIMENSIONS
1/2 NPT (3)
TYPICAL ALL 4-1/16
2-1/8 4-11/16
SHAFT EXTENSIONS
9-3/8 8-1/8
5-1/2
11
1.250 5-7/8
1.252
11-3/8
1/4 X 1/8 KEYWAY

SAE A-2, B-2/4, C-2 & C-4 MOTOR
FLANGES AVAILABLE ON HIGH SPEED
SHAFT AS MODIFIED STANDARD UNITS.
F
STYLE SO
BORE DIMENSIONS
2-1/4 OPTIONAL OUTPUT Bore:
4-1/2 1-1/2 with 3/8 X 3/16 Keyway
Single Reduction

STYLES AVAILABLE.

CALL: (605) 225-0360 FAX: (605) 225-0567 F-21


Features
bearing support.
n Ball bearings on high speed shaft. Tapered roller bearings on low
speed shaft.
n
Shaft mount design for direct mounting on the drive shaft of
OUTPUT ROTATION
Rating Tables
Input
RPM 2.19:1 3.10:1 4.19:1 4.86:1 5.83:1
1750 Output RPM 799 565 418 360 300
1150 Output RPM 525 371 274 237 197
850 Output RPM 388 274 203 175 146
690 Output RPM 315 223 165 142 118
100 Output RPM 45.7 32.3 23.8 20.6 17.1

Input
RPM 1:2.19 1:3.10 1:4.19 1:4.86 1:5.83
850 Output RPM 1863 2635
540 Output RPM 1183 1674 2263 2634 3150
300 Output RPM 658 930 1256 1457 1750
100 Output RPM 219 310 419 486 583
F-22 CALL: (605) 225-0360 FAX: (605) 225-0567


4-9/32 3/4 R
29/64 DIA. HOLE
1/2 3-15/32 4
5/16 X 5/32 KEYWAY

2-1/2 EFF. LGTH.
1-5/32
1.375
1.374
3-7/16
10-19/32
SHAFT MOUNTED UNITS
2-1/2 REQUIRE TORQUE ARMS.
5.961 TORQUE ARM KITS ARE
C.D. 7/8 AVAILABLE SEE PAGE F-53.
1/2 X 1/8
15-15/32 KEYWAY 3
2.1875
2.1905
ADDITIONAL RATIOS,
3 OUTPUT BORES AND INPUT
BORES ARE AVAILABLE
6-1/16
CONSULT FACTORY.
1/8 NPT (4)
1/2 5/16 DIA. BOLT

TYP. 1-1/32 6
3/8 NPT (4)
6-1/2
12
F
E SEE CHART FOR
(QTY) J HOLES ON K B.C. DIMENSIONS SHOWN ARE FOR REFERENCE ONLY.
G FOR EACH FLANGE SIZE CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST.
M M M M M
D
F P P P P
Single Reduction
SAE A-2
1-3/8 SAE A-2CL SAE A-2CL2000 SAE B-4 SAE C-4 NEMA 56C
SAE B-2 NEMA 182TC
H SAE C-2

BORE SIZES AVAILABLE D
1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, . 625 DIA. - 3/16 X 3/32 KW 1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
1-3/4, 1-7/8, 1-15/16, 2, 2-1/8, 2-1/4, .875 DIA. - 3/16 X 3/32 KW 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE
1-3/8-6B Spline, 1-3/8-21T Spline 1.000 DIA. - 1/4 X 1/8 KW 1.250 DIA. - 5/16 X 1/8 KW 13T - 16/32 D.P. SPLINE 21T - 16/32 D.P. SPLINE

FLANGE E F G H HOLES K M P
A-2 1-7/16 3.251 / 3.253 5/16 7/16 (2) 3/8 NC 4-3/16 6-7/8 5-1/4
A-2CL 1-7/16 3.251 / 3.253 3/16 7/16 (2) 1/2 NC 4-3/16 6-7/8 5-1/4
A-2CL2000 1-13/16 3.251 / 3.253 13/32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2
B-2 1-7/16 4.001 / 4.004 15/32 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
B-4 1-7/16 4.001 / 4.004 7/16 7/16 (4) 1/2 NC 5 6-1/16 6-1/16
C-2 1-7/8 5.001 / 5.004 17/32 7/8 (2) 5/8 NC 7-1/8 8-1/2 5-15/16
C-4 1-7/8 5.001 / 5.004 17/32 7/8 (4) 1/2 NC 6-3/8 6-1/16 6-1/16
56C 1-5/8 4.502 / 4.504 5/16 5/8 (4) 13/32 DIA. 5-7/8 6-9/16 --
182TC 2-7/16 8.502 / 8.505 5/16 1-7/16 (4) 17/32 DIA. 7-1/4 9-1/8 --
CALL: (605) 225-0360 FAX: (605) 225-0567 F-23

Model 95H - Single Reduction

Features
bearing support.
n Tapered roller bearings on all shafts.
OUTPUT ROTATION
Rating Tables
Input
RPM 2.07:1 3.05:1 3.94:1 4.93:1*
Input Horsepower 144.4 111.1 88.63 64.3
1750 Output RPM 846 575 444 355
Output Torque In. Lbs. 10756 12188 12590 11433
1150 Output RPM 555 378 291 233
850 Output RPM 410 279 215 172
690 Output RPM 333 226 175 140
100 Output RPM 48 33 25 20

Input
RPM 1:2.07 1:3.05 1:3.94 1:4.93*
850 Output RPM 1759 2588
540 Output RPM 1117 1644 2130 2664
300 Output RPM 620 913 1183 1479
100 Output RPM 207 304 394 493
F-24 CALL: (605) 225-0360 FAX: (605) 225-0567

Model 95H - Single Reduction
4-7/16 1-1/16
SAE B2 FLANGE SHOWN.
SEE BELOW FOR SIZES
AND DIMENSIONS FOR
AVAILABLE FLANGES.
3-3/8
2-1/2
5.960 7/8
5/16 DIA. BOLT
C.D. 1-3/8
3/8 X 3/16
15-3/16 KEYWAY 3
1.4375
1.4395 2-3/4
6
7-5/32
1
1/8 NPT (2)
3/4
3/8 NPT (2) TYP.
3/8 29/64 DIA. HOLE
1R 1-9/32 6
7-9/32
12
(5-3/4 SPLINED
F
SLEEVES)

E CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST.
G SHAFT MOUNTED UNITS

Single Reduction
M M TORQUE ARM KITS ARE
D
AVAILABLE SEE PAGE F-53.
SEE CHART FOR ADDITIONAL RATIOS,

F P P (QTY) J HOLES ON K B.C. OUTPUT BORES AND INPUT
FOR EACH FLANGE SIZE BORES ARE AVAILABLE
CONSULT FACTORY.
SAE B-2
1-3/8 SAE C-2 SAE C-4
H DRY SHIPPING WEIGHT 95 LBS.

1-3/8-6B Spline, 1-3/8-21T Spline 1.000 DIA. - 1/4 X 1/8 KW 1.250 DIA. - 5/16 X 1/8 KW 13T - 16/32 D.P. SPLINE 21T - 16/32 D.P. SPLINE
1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE

B-2 1-5/16 4.001 / 4.004 15/32 33/64 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
C-2 1-3/4 5.001 / 5.004 17/32 61/64 (2) 5/8 NC 7-1/8 8-1/2 5-15/16
C-4 1-3/4 5.001 / 5.004 17/32 61/64 (4) 1/2 NC 6-3/8 6-1/16 6-1/16
CALL: (605) 225-0360 FAX: (605) 225-0567 F-25


Features
bearing support.
n Choice of six (6) standard gear ratios.
n Case carburized alloy steel gearing for strength and long wear life.
u Heavy-duty industrial seals to keep lubricant in and dirt out.
n
Heat treated alloy steel shafting for greater strength and wear
resistance.

OUTPUT ROTATION
Rating Table
RATIOS
INPUT 1:1 1.5:1 2:1 3:1 4:1 5:1
RPM HELICAL HELICAL HELICAL HELICAL HELICAL HELICAL
INPUT HORSEPOWER 530.1 418.4 357.1 262.6 220.1 171.5
OUTPUT RPM 2400 1600 1200 800 600 480
2400 OUTPUT TORQUE IN. LBS. 13920 16481.1 18754.6 20688.5 23117 22523.3
(*) INPUT O.H.L. 740 746 982 1170 1212 1309
(*) OUTPUT O.H.L. 695 1022 1188 1625 1790 2259
INPUT HORSEPOWER 405.8 319.4 272 199.3 166.6 129.6
OUTPUT RPM 1750 1166.7 875 583.3 437.5 350
1750 OUTPUT TORQUE IN. LBS. 14613.6 17254.4 19590.6 21535.5 24000 23334.7
(*) INPUT O.H.L. 959 974 1185 1343 1392 1485
(*) OUTPUT O.H.L. 903 1255 1457 1944 2145 2593
OUTPUT RPM 1150 766.7 575 383.3 287.5 230
1150 OUTPUT TORQUE IN. LBS. 15495.4 18229.7 20637.9 22585.7 25086.4 24326.6
(*) INPUT O.H.L. 1308 1340 1510 1620.7 1680 1765
(*) OUTPUT O.H.L. 1237 1654 1890 2456 2715 3130
INPUT HORSEPOWER 217.1 169.8 143.9 104.7 87 67.4I
OUTPUT RPM 850 566.7 425 263.3 212.5 170
850 OUTPUT TORQUE IN. LBS. 16095.4 18888 21340.4 23283.4 25802.9 24976.9
(*) INPUT O.H.L. 1528 1582 1736 1851 1909 2004
(*) OUTPUT O.H.L. 1521 1980 2252 2834 3107 3493
INPUT HORSEPOWER 180.5 141 119.3 86.6 71.2 55.6
OUTPUT RPM 690 460 345 230 172.5 138
690 OUTPUT TORQUE IN. LBS. 16490.2 19318.8 21798.1 23734.9 26000 25394.5
(*) INPUT O.H.L. 1681 1751 1894 2012 2068 2170
(*) OUTPUT O.H.L. 1740 2232 2532 3126 3410 3773
OUTPUT RPM 300 200 150 100 75 60
300 OUTPUT TORQUE IN. LBS. 17892.4 20833.5 23394.9 25292.2 26000 26000
(*) INPUT O.H.L. 2432 2555 2664 2798 2850 2978
(*) OUTPUT O.H.L. 2818 3383 3751 4444 4857 5000
OUTPUT RPM 100 66.7 50 33.3 25 20
100 OUTPUT TORQUE IN. LBS. 19298.8 22124 24950.8 26000 26000 26000
(*) INPUT O.H.L. 3853 4007 4120 4273 4336 4476
(*) OUTPUT O.H.L. 4355 5000 5000 5000 5000 5000
WR2 Referred HIGHSPEED SHAFT 566.8 842.1 1112.2 1839.2 2027.7 2410.2
to: (LBS.IN2) LOWSPEED SHAFT 566.8 374.3 278 182.1 126.7 96.4
(*) OVERHUNG LOAD (LBS) AT CENTER OF SHAFT EXTENSIONS
F-26 CALL: (605) 225-0360 FAX: (605) 225-0567


19
5-3/16
8-1/2 1-9/16 TYP. TYP. 9-1/2
4-31/32
3-27/32
C 1.13 TYP.
HUB CITY
3.75 TYP.
5-1/8
A 26-7/16
B P&W KEYWAY 5/8 x 5/16 8-3/4 8.500 18-3/4

P&W KEYWAY TYP. C.D.
2.500
2.498
2-1/2
TYP.
4-7/8
6-1/2 TYP.
TYP.
4-13/16
4-31/32
(2) 5/8-11 NC
3 8-1/2 3 X 1 DEEP
1/2 NPT (8) TYP. 6-1/2 TYP.
TYP. (4) PLCS
6.01 1/2NC X 5/8 LG 3/4 NPT (6)
SETSCREWS
(4) FURNISHED
5/8 x 5/16 KEYWAY
2.500
F
2.502 HIGH SPEED SHAFT DIMENSIONS
RATIO A B C
1:1, 1.5:1, 2:1 & 3:1 2.500/2.498 5/8 X 5/16 4-13/16
4:1 & 5:1 1.750/1.748 3/8 X 3/16 4-1/4
STYLE SO
BORE DIMENSIONS FOR LUBRICATION AND INSTALLATION
Single Reduction
9-1/32

Standard Styles Available STYLES AVAILABLE.

CALL: (605) 225-0360 FAX: (605) 225-0567 F-27

Model 52 - Double Reduction

Features
bearing support.
n Choice of three (3) standard gear ratios.
n
DOUBLE REDUCTION UNITS PROVIDE SAME DIRECTION OUTPUT

ROTATION
Rating Table
RATIOS
Input
RPM 15.69:1 19.67:1 25.56:1
Input Horsepower 3 2.5 2.1
1750 Output RPM 112 89 68
Output Torque In. Lbs. 1667 1765 1882
Input Horsepower 2.2 1.8 1.5

1150 Output RPM 73 58 45

850 Output RPM 54 43 33

690 Output RPM 44 35 27
Input Horsepower .22 .17 .13

100 Output RPM 6.4 5.1 3.9
F-28 CALL: (605) 225-0360 FAX: (605) 225-0567

3-27/32
9/32 3-9/16 1-3/4 21/64 DRILL 2-1/2

3/16 X 3/32 KEYWAY
1-1/4 EFF. LGTH.
11/16 TYP. 5/8 R 45 TYP.
.750
.748
1/4 NPT (8)
1-7/8
2.643 C.D.
1-15/16
2-1/2 TYP. TYP.
7
1/4 X 1/16 4-5/8

11-1/32 KEYWAY TYP.
1/2
3.072 C.D.
1.1875
1.1895
2-1/4
3-7/16 TYP.
2-7/16 TYP.
4-13/16 3/8
TYP.
F
3-3/8
DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. 6-3/4

E SEE CHART FOR SHAFT MOUNTED UNITS

(QTY) J HOLES ON K B.C. REQUIRE TORQUE ARMS.
FOR EACH FLANGE SIZE TORQUE ARM KITS ARE
G
M M M
D
ADDITIONAL RATIOS,
OUTPUT BORES AND INPUT
BORES ARE AVAILABLE
F P P CONSULT FACTORY.
Double Reduction
SAE B-2 SAE A-2 INSTRUCTIONS - REFER TO SECTION R
1-3/32 SAE A-2CL NEMA 56C
NEMA 143TC
H DRY SHIPPING WEIGHT 25 LBS.

1, 1-1/8, 1-1/4 .625 DIA. - 3/16 X 3/32 KW .875 DIA. - 3/16 X 3/32 KW 1 - 6B SPLINE

A-2 1-1/2 3.251 / 3.253 5/16 19/32 (2) 3/8 NC 4-3/16 4-1/2 4-1/2
A-2CL 1-3/4 3.251 / 3.253 3/16 19/32 (2) 1/2 NC 4-3/16 4-1/2 4-1/2
B-2 1-5/8 4.001 / 4.003 7/16 3/4 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
56C 2 4.502 / 4.504 3/16 1-7/32 (4) 13/32 DIA. 5-7/8 6-1/2 --
CALL: (605) 225-0360 FAX: (605) 225-0567 F-29

Models 83L & 83S - Double Reduction

Features
bearing support.

ROTATION
Rating Table
RATIOS
Input
RPM 6.09:1 8.14:1 12.47:1 19.37:1
1750 Output RPM 287 215 140 90

1150 Output RPM 189 141 92 59

850 Output RPM 140 104 68 44

690 Output RPM 113 85 55 36
Input Horsepower 1.50 1.13 .74 .48

100 Output RPM 16.4 12.3 8.0 5.2
F-30 CALL: (605) 225-0360 FAX: (605) 225-0567

Models 83L & 83S - Double Reduction
3/8 X 3/16 KEYWAY

4-7/16 2-1/4 EFF. LGTH.
1/4 X 1/8 KEYWAY 3-3/4 29/64 DRILL
11/32 3-25/32 2-11/16 2 EFF. LGTH.
3/4 R
1.000 3/4
.998 TYP.
2-9/32
1.500 3
1.498 MODEL 83SS
SHAFT OUTPUT
3.680 2-7/8 3-1/16 STYLES AVAILABLE
C.D.
9 5-9/32 STYLE DO
5/8 2-1/2 TYP.

14-3/8 3/8 X 1/8
KEYWAY 3.960
1.4375 C.D.
1.4395
2-7/16 TYP.
4-15/32 1/8 NPT (8)
7/8 1-13/16 Optional Output Bore: STYLE A

3/8 NPT (4) 5/16 DIA. BOLT 4-15/32
TYP. TYP. 1-1/4 with 1/4 X 1/8
5-7/8 FLANGE INPUT MODELS 8-15/16
HAVE (6) 1/8 NPT (INPUT Keyway
SIDE HOUSING DOES NOT
HAVE (2) ON OUTSIDE EDGE).
SHAFT MOUNTED UNITS

DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. TORQUE ARM KITS ARE
CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST. AVAILABLE SEE PAGE F-53.
E
ADDITIONAL RATIOS,
BORES ARE AVAILABLE
CONSULT FACTORY. STYLE C
F
G
M M M M
D
F P P P
SEE CHART FOR

SAE A-2
1-3/8 SAE A-2CL2000 SAE B-4 NEMA 56C (QTY) J HOLES ON K B.C.
SAE A-2CL
NEMA 182TC FOR EACH FLANGE SIZE
SAE B-2
Double Reduction
H
INPUT BUSHING SIZES
D
OPTIONAL LOW SPEED . 625 DIA. - 3/16 X 3/32 KW 1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
BORE SIZES AVAILABLE .875 DIA. - 3/16 X 3/32 KW 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE
1, 1-1/8, 1-3/16, 1-1/4, 1-3/8, 1-1/2 1.000 DIA. - 1/4 X 1/8 KW 1.250 DIA. - 5/16 X 1/8 KW 13T - 16/32 D.P. SPLINE 21T - 16/32 D.P. SPLINE

A-2 1-7/16 3.251 / 3.253 5/16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16
A-2CL 1-7/16 3.251 / 3.253 3/16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16
A-2CL2000 1-13/16 3.251 / 3.253 13/32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2
B-2 1-7/16 4.001 / 4.003 7/16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
B-4 1-7/16 4.001 / 4.003 7/16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8
56C 1-5/8 4.502 / 4.504 5/16 5/8 (4) 13/32 DIA. 5-7/8 6-9/16 --
182TC 2-7/16 8.502 / 8.505 5/16 1-7/16 (4) 17/32 DIA. 7-1/4 9-1/8 --
CALL: (605) 225-0360 FAX: (605) 225-0567 F-31


Features
bearing support.
n

ROTATION
Rating Table
RATIOS
Input
RPM 6.02:1 8.58:1 10.49:1 12.84:1
1750 Output RPM 291 204 167 136

1150 Output RPM 1911 134 110 90

850 Output RPM 141 99 81 66

690 Output RPM 115 80 66 54

100 Output RPM 16.6 11.7 9.5 7.8
F-32 CALL: (605) 225-0360 FAX: (605) 225-0567


5-3/8
5/16 X 5/32 KEYWAY 4-1/4
1/2 4-15/16 3-23/32 2-7/8 EFF. LGTH.
1 15/16 TYP.
TYP.
29/64 DIA. HOLE
1.375 5/8 R
3 1.373
3-1/4 TYP.
3.960
1/4 NPT (8) C.D.
1-15/16
TYP.
8-3/4
7/8
15-5/16
3/8 X 1/8 4-13/16
KEYWAY 3.960 TYP.
C.D.
1.4375
1.4395 3-3/8 TYP.
3-1/4 TYP.
4-3/8
FLANGE INPUT MODELS

HAVE (4) 1/4 NPT IN HOUSING
HALF OPPOSITE INPUT ONLY.
6-13/16 1
F
TYP.
4-3/8
8-3/4
E SHAFT MOUNTED UNITS
G REQUIRE TORQUE ARMS.
M M M
D TORQUE ARM KITS ARE
ADDITIONAL RATIOS,
SEE CHART FOR OUTPUT BORES AND INPUT
F P P (QTY) J HOLES ON K B.C. BORES ARE AVAILABLE
FOR EACH FLANGE SIZE CONSULT FACTORY.
SAE A-2 FOR LUBRICATION AND INSTALLATION

1-3/8 SAE A-2CL SAE B-4 NEMA 56C INSTRUCTIONS - REFER TO SECTION R
SAE B-2
SAE C-4 NEMA 182TC DRY SHIPPING WEIGHT 70 LBS.
H SAE C-2
Double Reduction
INPUT BUSHING SIZES
D
OPTIONAL LOW SPEED . 625 DIA. - 3/16 X 3/32 KW 1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
BORE SIZES AVAILABLE .875 DIA. - 3/16 X 3/32 KW 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE
1, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8 1.000 DIA. - 1/4 X 1/8 KW 1.250 DIA. - 5/16 X 1/8 KW 13T - 16/32 D.P. SPLINE 21T - 16/32 D.P. SPLINE

A-2 1-7/16 3.251 / 3.253 5/16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16
A-2CL 1-7/16 3.251 / 3.253 3/16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16
B-2 1-7/16 4.001 / 4.003 7/16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
B-4 1-7/16 4.001 / 4.003 7/16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8
C-2 1-7/8 5.001 / 5.003 17/32 31/32 (2) 5/8 NC 7-1/8 8-1/2 5-15/16
C-4 1-7/8 5.001 / 5.003 17/32 31/32 (4) 1/2 NC 6-3/8 6-1/16 6-1/16
56C 1-5/8 4.502 / 4.504 5/16 5/8 (4) 13/32 DIA. 5-7/8 6-9/16 --
182TC 2-7/16 8.501 / 8.504 5/16 1-7/16 (4) 17/32 DIA. 7-1/4 9-1/8 --
CALL: (605) 225-0360 FAX: (605) 225-0567 F-33


Features
bearing support.
n

ROTATION
Rating Table
RATIOS
Input
RPM 10.37:1 15.06:1 19.87:1 25.46:1 48.42:1
1750 Output RPM 169 116 88 69 36

1150 Output RPM 111 76 58 45 24

850 Output RPM 82 56 43 33 18

690 Output RPM 67 46 35 27 14
Input Horsepower .90 .62 .47 .37 .19

100 Output RPM 9.6 6.6 5.0 3.9 2.1
F-34 CALL: (605) 225-0360 FAX: (605) 225-0567


4-11/16
7/16 4-1/4 2-17/32 1-1/8 4-3/32
3/16 X 3/32 KEYWAY 29/64 DIA. HOLE
5/8 2 EFF. LGTH.
.750 3/4 R
.748
2-9/32
2.790 C.D.
7-5/8
5/8 1/2 X 1/8

13-17/32 KEYWAY 3.960 4-7/8
C.D.
1.9375
1.9395
1-1/16 3-11/32
1-1/16
4-1/2
5/16 DIA. BOLT
1-1/8 1/4 NPT (5) 3/4

5-3/4
4-17/32
9-1/16

F
SHAFT MOUNTED UNITS
SEE CHART FOR REQUIRE TORQUE ARMS.
(QTY) J HOLES ON K B.C. TORQUE ARM KITS ARE
E FOR EACH FLANGE SIZE AVAILABLE SEE PAGE F-53.
G M M M M
D
ADDITIONAL RATIOS,
F P P P BORES ARE AVAILABLE
CONSULT FACTORY.
1-15/32 SAE B-2 SAE A-2 SAE B-4

Double Reduction
H SAE A-2CL NEMA 56C


1-3/16, 1-1/4, 1-1/2, 2 .625 DIA. - 3/16 X 3/32 KW .875 DIA. - 3/16 X 3/32 KW 1.000 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE

A-2 1-3/4 3.251 / 3.253 5/16 15/32 (2) 3/8 NC 4-3/16 5-1/2 5-1/2
A-2CL 1-3/4 3.251 / 3.253 3/16 15/32 (2) 1/2 NC 4-3/16 5-1/2 5-1/2
B-2 1-7/8 4.001 / 4.003 7/16 19/32 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
B-4 1-7/8 4.001 / 4.003 7/16 19/32 (4) 1/2 NC 5 6-1/8 6-1/8
56C 2 4.502 / 4.504 3/16 23/32 (4) 13/32 DIA. 5-7/8 6-1/2 --
CALL: (605) 225-0360 FAX: (605) 225-0567 F-35


Features
bearing support.
n Choice of eight (8) standard gear ratios.

ROTATION
Rating Table
RATIOS
Input
RPM 5.00:1 10.00:1 15.00:1 20.00:1 25.00:1 51.08:1 59.08:1 72.00:1
Input Horsepower 21.9 18.5 8.8 7.2 5.8 3.2 2.8 2.3
1750 Output RPM 350 175 117 88 70 34 30 24
Output Torque In. Lbs. 3871 4395 4651 5093 5076 5803 5825 5859
1150 Output RPM 230 115 77 58 46 23 19 16
850 Output RPM 170 85 57 43 34 17 14 12
Input Horsepower 10.2 6.0 4.3 3.2 2.6 1.3 1.1 .9

690 Output RPM 138 69 46 35 28 14 12 10
Input Horsepower 1.90 .97 .65 .49 .39 .19 .16 .13
100 Output RPM 20.0 10.0 6.7 5.0 4.0 2.0 1.7 1.4
F-36 CALL: (605) 225-0360 FAX: (605) 225-0567


5-11/32
7/16 4-29/32 3
1/4 X 1/8 KEYWAY
3/8 NPT (4) 2 EFF. LGTH. 7/8 TYP. 4
29/64 DIA. HOLE
3/4 R
1.000
.998
2-9/16
3.053 1-5/8 1-5/8

C.D.
9-9/16
5/8
15-1/16 1/2 X 3/16

KEYWAY 4.625 4-5/16
C.D. TYP.
2.1875
2.1905
4-13/16 1/8 NPT (4)
5/16 DIA. BOLT

7/8 2-5/8 2-5/8
TYP.
6-3/8 4-7/8
9-3/4

F
SHAFT MOUNTED UNITS
SEE CHART FOR REQUIRE TORQUE ARMS.
E FOR EACH FLANGE SIZE AVAILABLE SEE PAGE F-53.
G M M M M
D ADDITIONAL RATIOS,
BORES ARE AVAILABLE
F P P P CONSULT FACTORY.

1-3/8 SAE A-2
H SAE A-2CL SAE A-2CL2000 SAE B-4 NEMA 56C
SAE B-2 NEMA 182TC DRY SHIPPING WEIGHT 80 LBS.
INPUT BUSHING SIZES Double Reduction
D
OPTIONAL LOW SPEED
. 625 DIA. - 3/16 X 3/32 KW 1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
.875 DIA. - 3/16 X 3/32 KW 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE
1, 1-1/4, 1-1/2, 1-3/4, 1-15/16, 2 1.000 DIA. - 1/4 X 1/8 KW 1.250 DIA. - 5/16 X 1/8 KW 13T - 16/32 D.P. SPLINE 21T - 16/32 D.P. SPLINE

A-2 1-7/16 3.251 / 3.253 5/16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16
A-2CL 1-7/16 3.251 / 3.253 3/16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16
A-2CL2000 1-13/16 3.251 / 3.253 13/32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2
B-2 1-7/16 4.001 / 4.003 7/16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
B-4 1-7/16 4.001 / 4.003 7/16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8
56C 1-5/8 4.502 / 4.504 5/16 5/8 (4) 13/32 DIA. 5-7/8 6-9/16 --
182TC 2-7/16 8.502 / 8.505 5/16 1-7/16 (4) 17/32 DIA. 7-1/4 9-1/8 --
CALL: (605) 225-0360 FAX: (605) 225-0567 F-37


Features
bearing support.
n Choice of eight (8) standard gear ratios.
n
OUBLE REDUCTION UNITS PROVIDE SAME DIRECTION OUTPUT

D
ROTATION
Rating Table
RATIOS
Input
RPM 4.92:1 10.08:1 15.19:1 25.34:1 31.14:1 40.57:1 44.89:1 63.99:1
1750 Output RPM 356 174 115 69 56 43 39 27
1150 Output RPM 234 114 76 45 37 28 26 18
850 Output RPM 173 84 56 34 27 21 19 13
690 Output RPM 140 68 45 27 22 17 15 11
Input Horsepower 3.23 1.61 1.07 .64 .52 .40 .36 .25
100 Output RPM 20.3 9.9 6.6 3.9 3.2 2.5 2.2 1.6
F-38 CALL: (605) 225-0360 FAX: (605) 225-0567


5-7/8
1/2 5-3/8 3
3/8 NPT (8) 5/16 X 5/32 KEYWAY 4-1/2 29/64 DIA. HOLE
2 EFF. LGTH.
1R
1.375
3-1/32 1.373
3.901
C.D.
12-5/32
3/4
18-1/4 5/8 X 3/16 5.501 2-11/16

KEYWAY C.D.
2.4375
2.4405
1/8 NPT (4)

5-13/16
FLANGE INPUT MODELS

7/8 HAVE (4) 3/8 NPT 5/16 DIA. BOLT
TYP. IN HOUSING HALF OPPOSITE 1-1/32 TYP. 5-7/8
7-1/8 INPUT ONLY. 11-3/4
SEE CHART FOR INSTRUCTIONS - REFER TO SECTION R
(QTY) J HOLES ON K B.C.
E
F
FOR EACH FLANGE SIZE
G M M M M SHAFT MOUNTED UNITS
D
TORQUE ARM KITS ARE
F P P P
ADDITIONAL RATIOS,
SAE A-2
1-3/8 SAE A-2CL NEMA 56C BORES ARE AVAILABLE
SAE A-2CL2000 SAE B-4
SAE B-2 NEMA 143TC CONSULT FACTORY.
SAE C-4 NEMA 182TC
H SAE C-2

1-3/8, 1-3/4, 1-7/8, 1-15/16, 2-3/16, . 625 DIA. - 3/16 X 3/32 KW 1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
Double Reduction
2-1/4, 2-5/16, 2-3/8 .875 DIA. - 3/16 X 3/32 KW 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE

A-2 1-7/16 3.251 / 3.253 5/16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16
A-2CL 1-7/16 3.251 / 3.253 3/16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16
A-2CL2000 1-13/16 3.251 / 3.253 13/32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2
B-2 1-7/16 4.001 / 4.003 7/16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
B-4 1-7/16 4.001 / 4.003 7/16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8
C-2 1-7/8 5.001 / 5.003 17/32 7/8 (2) 5/8 NC 7-1/8 8-1/2 6-1/8
C-4 1-7/8 5.001 / 5.003 17/32 7/8 (4) 1/2 NC 6-3/8 6-1/16 6-1/16
56C 1-5/8 4.502 / 4.504 5/16 5/8 (4) 13/32 DIA. 5-7/8 6-9/16 --
143TC 1-5/8 4.502 / 4.504 5/16 5/8 (4) 13/32 DIA. 5-7/8 6-9/16 --
182TC 2-7/16 8.502 / 8.505 5/16 1-7/16 (4) 17/32 DIA. 7-1/4 9-1/8 --
CALL: (605) 225-0360 FAX: (605) 225-0567 F-39


Features
bearing support.
n Ball bearings on high speed shaft. Tapered roller bearings on
low speed shaft.
n Choice of seven (7) standard gear ratios.

ROTATION
Rating Table
RATIOS
Input
RPM 5.02:1 7.99:1 12.42:1 15.87:1 18.96:1 23.65:1 30.02:1
Input Horsepower 49.9 40.1 27.7 22.7 20.0 17.1 13.8
1750 Output RPM 350 219 141 110 92 74 58
Output Torque In. Lbs. 8536 11314 12136 12714 13395 14265 14644

1150 Output RPM 250 144 93 72 61 49 38

850 Output RPM 170 106 68 54 45 36 28

690 Output RPM 138 86 56 43 36 29 23
Input Horsepower 3.33 3.23 2.03 1.63 1.37 1.1 .86

100 Output RPM 20.0 12.5 8.0 6.3 5.3 4.2 3.3
F-40 CALL: (605) 225-0360 FAX: (605) 225-0567

5-1/4 29/64 DIA.

5-19/32 HOLE
1/2 4-25/32 3-31/32 1/4 X 1/8 KEYWAY 2-1/2
3-1/4 EFF. LGTH.
1-1/8 R
1.250 3/4
3 1.249
3.961 1/2
C.D.
3/4 10-19/32
18-15/16
3/4 X 3/16
5.961 KEYWAY
C.D.
2
TYP.
2.9375
2.9405
3-1/4
7/8 5/16 DIA. BOLT
1/8 NPT (4)

1 6
TYP.
3/8 NPT (6)
7-5/8 12
E
SEE CHART FOR
SHAFT MOUNTED UNITS
TORQUE ARM KITS ARE
F
G M M M
BORES ARE AVAILABLE
F P P CONSULT FACTORY.

SAE A-2 INSTRUCTIONS - REFER TO SECTION R
SAE A-2CL
1-3/8 SAE A-2CL2000 SAE B-4 NEMA 56C
SAE B-2 SAE C-4 NEMA 182TC
H SAE C-2 DRY SHIPPING WEIGHT 130 LBS.
INPUT BUSHING SIZES
Double Reduction
D
OPTIONAL LOW SPEED
. 625 DIA. - 3/16 X 3/32 KW 1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
.875 DIA. - 3/16 X 3/32 KW 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE
1-15/16, 2, 2-3/16, 2-7/16, 2-1/2, 3 1.000 DIA. - 1/4 X 1/8 KW 1.250 DIA. - 5/16 X 1/8 KW 13T - 16/32 D.P. SPLINE 21T - 16/32 D.P. SPLINE

A-2 1-1/4 3.251 / 3.253 5/16 51/64 (2) 3/8 NC 4-3/16 6-7/8 5-1/4
A-2CL 1-1/4 3.251 / 3.253 3/16 51/64 (2) 1/2 NC 4-3/16 6-7/8 5-1/4
A-2CL2000 1-1/4 3.251 / 3.253 5/16 51/64 (2) 1/2 NC 4-3/16 6-7/8 5-1/4
B-2 1-1/4 4.001 / 4.003 7/16 51/64 (2) 1/2 NC 5-3/4 6-7/8 5-1/4
B-4 1-1/4 4.001 / 4.003 7/16 51/64 (4) 1/2 NC 5 5-1/8 5-1/8
C-2 1-1/4 5.001 / 5.003 9/16 51/64 (2) 5/8 NC 7-1/8 8-1/2 6-1/8
C-4 1-1/4 5.001 / 5.003 9/16 51/64 (4) 1/2 NC 6-3/8 6-1/8 6-1/8
56C 2 4.502 / 4.504 5/16 1-35/64 (4) 13/32 DIA. 5-7/8 6-9/16 --
182TC 2-9/16 8.501 / 8.504 5/16 2-7/64 (4) 17/32 DIA. 7-1/4 9-1/8 --
CALL: (605) 225-0360 FAX: (605) 225-0567 F-41


Features
bearing support.

ROTATION
Rating Table
RATIOS
Input
RPM 5.04:1 10.36:1 15.22:1 19.99:1 25.81:1 29.89:1 49.62:1
1750 Output RPM 347 169 115 88 68 59 35

1150 Output RPM 228 111 76 58 45 38 23

850 Output RPM 169 82 56 43 33 28 17

690 Output RPM 137 67 45 35 27 23 14
Input Horsepower 9.26 4.59 3.13 2.38 1.84 1.59 .96

100 Output RPM 19.8 9.7 6.6 5.0 3.9 3.3 2.0
BORE TOLERANCE NOMINAL +.003
F-42 CALL: (605) 225-0360 FAX: (605) 225-0567

7-7/8
5/8 7-1/4 5 1-1/2 6-5/8
41/64 DIA. HOLE

4 1/2 X 1/4 P&W KEYWAY
1-1/4 R
3-7/8
2.187
2.186
5.501
C.D. 4
14-1/4
1/2 NPT (7)
24-5/8 7.501 7/8 X 1/4 8

13/16
C.D. KEYWAY
4-29/32
3.4375
3.4405
3-3/4
SHAFT MOUNTED UNITS
TYP. REQUIRE TORQUE ARMS.
TORQUE ARM KITS ARE
7-3/4 AVAILABLE See Page F-53.
ADDITIONAL RATIOS,
1-1/4 BORES ARE AVAILABLE
TYP. 1-1/2 CONSULT FACTORY.
9-3/16 8-1/16
16-1/8 FOR LUBRICATION AND
INSTALLATION INSTRUCTIONS -
REFER TO SECTION R
E DIMENSIONS SHOWN ARE FOR REFERENCE ONLY.
SEE CHART FOR
F
G FOR EACH FLANGE SIZE
M M M M M
D
F P P P P
SAE C-2 SAE B-2 SAE A-2

1-3/8 SAE B-4 SAE A-2CL SAE C-4 NEMA 182TC
SAE A-2CL2000 SAE D-4
H SAE A-4CL
INPUT BUSHING SIZES
OPTIONAL LOW SPEED
D
BORE SIZES AVAILABLE 1.000 DIA. - 1/4 X 1/8 KW 1.250 DIA. - 5/16 X 1/8 KW 13T - 16/32 D.P. SPLINE 21T - 16/32 D.P. SPLINE
Double Reduction
2-3/16, 2-1/4, 2-7/16, 2-1/2, 2-13/16, 1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
2-3/4, 2-15/16, 3, 3-1/4, 3-1/2 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE

A-2 1-3/8 3.251 / 3.253 5/16 53/64 (2) 3/8 NC 4-3/16 6-1/16 6-1/16
A-2CL 1-3/8 3.251 / 3.253 3/16 53/64 (2) 1/2 NC 4-3/16 6-1/16 6-1/16
A-2CL2000 1-3/8 3.251 / 3.253 5/16 53/64 (2) 1/2 NC 4-3/16 6-1/16 6-1/16
A-4CL 1-3/8 3.251 / 3.253 3/16 53/64 (4) 1/2 NC 4-3/16 6-1/16 6-1/16
B-2 1-3/8 4.001 / 4.003 7/16 53/64 (2) 1/2 NC 5-3/4 6-1/16 6-1/16
B-4 1-3/8 4.001 / 4.003 7/16 53/64 (4) 1/2 NC 5 6-1/16 6-1/16
C-2 1-1/2 5.001 / 5.003 9/16 31/32 (2) 5/8 NC 7-1/8 8-1/2 6-1/8
C-4 1-1/2 5.001 / 5.003 9/16 31/32 (4) 1/2 NC 6-3/8 6-1/16 6-1/16
D-4 1-1/2 6.001 / 6.003 9/16 31/32 (4) 3/4 NC 9 8 8
182TC 2-7/16 8.501 / 8.504 5/16 1-57/64 (4) 17/32 DIA. 7-1/4 9-1/8
CALL: (605) 225-0360 FAX: (605) 225-0567 F-43


Features
bearing support.
n Tapered roller bearings on all shafts.
n

ROTATION
Rating Table
RATIOS
Input
RPM 5.16:1 10.48:1 15.23:1 19.99:1 24.84:1 29.32:1 50.69:1
1750 Output RPM 339 167 115 88 70 60 35

1150 Output RPM 223 110 76 58 46 39 23

850 Output RPM 165 81 56 43 34 29 17

690 Output RPM 134 66 45 35 28 24 14

100 Output RPM 19.4 9.5 6.6 5.0 4.0 3.4 2.0
F-44 CALL: (605) 225-0360 FAX: (605) 225-0567


9-1/4
3/4 8 4-1/2 21/32 DIA. HOLE
1 4-15/32 1-1/2 6-1/8
1-1/2 R
TYP.
4
5/8 X 5/16
P&W KEYWAY
5
2.437
6.891 2.435
C.D.
20-27/32
1/2 NPT (5)
30-3/8 1
9.001
1 X 1/4
C.D. KEYWAY 6-3/4
TYP.
3.9375
3.9405
1-31/32
9-1/2
F
5/8 DIA. BOLT
11-1/4
1-1/2
9-3/8
18-3/4
DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. SHAFT MOUNTED UNITS

E SEE CHART FOR
CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST. REQUIRE TORQUE ARMS.
G FOR EACH FLANGE SIZE
AVAILABLE See Page F-53.
M M M
BORES ARE AVAILABLE

SAE B-2 INSTRUCTIONS - REFER TO SECTION R
1-7/32 SAE A-2 SAE D-2
SAE B-4
SAE A-2CL SAE D-4
Double Reduction
SAE C-2
H SAE C-4
INPUT BUSHING SIZES

OPTIONAL LOW SPEED
1.000 DIA. - 1/4 X 1/8 KW 13T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE
4
9T - 16/32 D.P. SPLINE 14T - 12/24 D.P. SPLINE 21T - 16/32 D.P. SPLINE

A-2 7/8 3.251 / 3.253 -- 5/8 (2) 3/8 NC 4-3/16 8-3/8 8-3/8
A-2CL 7/8 3.251 / 3.253 -- 5/8 (2) 1/2 NC 4-3/16 8-3/8 8-3/8
B-2 7/8 4.001 / 4.003 -- 5/8 (2) 1/2 NC 5-3/4 8-3/8 8-3/8
B-4 7/8 4.001 / 4.003 -- 5/8 (4) 1/2 NC 5 8-3/8 8-3/8
C-2 7/8 5.001 / 5.003 9/16 5/8 (2) 5/8 NC 7-1/8 8-3/8 8-3/8
C-4 7/8 5.001 / 5.003 9/16 5/8 (4) 1/2 NC 6-3/8 8-3/8 8-3/8
D2-4 7/8 6.001 / 6.003 9/16 5/8 (4) 25/32 DIA. 9 8-3/8 8-3/8
CALL: (605) 225-0360 FAX: (605) 225-0567 F-45


Features
n Rugged Ductile iron housing designed for rigid gear and
bearing support.
n Precision bearings on all shafts.
n Choice of nine (9) standard gear ratios.

ROTATION
Rating Table
RATIOS
Input
RPM 5.06:1 9.9:1 15.37:1 20:1 25.56:1 29.38:1 39.85:1 49.3:1 59.76:1
Input Horsepower 252.8 146.8 121.5 95.7 89.0 79.0 54.4 39.7 32.1
1750 Output RPM 346 177 114 88 68 60 44 35 29
Output Torque In. Lbs. 46019 52329 67301 68940 80624 81506 79727 70441 69056

1150 Output RPM 227 116 75 58 45 39 29 23 19
850 Output RPM 168 86 55 43 33 29 21 17 14
690 Output RPM 136 70 45 35 27 23 17 14 12
100 Output RPM 19.8 10.1 6.5 5.0 3.9 3.4 2.5 2.0 1.7
F-46 CALL: (605) 225-0360 FAX: (605) 225-0567


10-11/16
5 4-5/32
3/4 9-15/16 TYP. 6-1/8
41/64 DIA. HOLE
1-1/4
TYP. 5/8 X 5/16
P&W KEYWAY 1-1/2 R
4-3/8
2.437
5 2.436
6.890
C.D.
20-27/32
4 TYP.
30-3/8 1
9.000 1 X 1/4
C.D. KEYWAY
4.4375
4.4405
9-1/2
3/4 DIA. BOLTS
F
1/2 NPT (8) 4-3/32
TYP. 9-3/8
13-1/4
18-3/4
E SEE CHART FOR
(QTY) J HOLES ON K B.C. DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. SHAFT MOUNTED UNITS
G CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST. REQUIRE TORQUE ARMS.
TORQUE ARM KITS ARE
M M M AVAILABLE See Page F-53.
D
ADDITIONAL RATIOS,
F P P P BORES ARE AVAILABLE
CONSULT FACTORY.

1-3/8 SAE C-2 SAE B-4
Double Reduction
SAE A-2CL
SAE C-4
SAE B-2 DRY SHIPPING WEIGHT 550 LBS.
H
INPUT BUSHING SIZES
D
OPTIONAL LOW SPEED
BORE SIZES AVAILABLE 1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
3, 3-7/16, 3-15/16, 4, 4-3/16 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE

A-2 1 3.251 / 3.253 -- 5/8 (2) 3/8 NC 4-3/16 8 8
A-2CL 1 3.251 / 3.253 -- 5/8 (2) 1/2 NC 4-3/16 8 8
B-2 1 4.001 / 4.003 -- 5/8 (2) 1/2 NC 5-3/4 8 8
B-4 1 4.001 / 4.003 -- 5/8 (4) 1/2 NC 5 8 8
C-2 1 5.001 / 5.003 9/16 5/8 (2) 5/8 NC 7-1/8 10-5/8 8-1/2
C-4 1 5.001 / 5.003 9/16 5/8 (4) 1/2 NC 6-3/8 10-5/8 8-1/2
CALL: (605) 225-0360 FAX: (605) 225-0567 F-47


Features
n Rugged Ductile iron housing designed for rigid gear and
bearing support.
n Precision bearings on all shafts.

ROTATION
Rating Table
RATIOS
Input
RPM 5.16:1 10.46:1 15.21:1 24.90:1 29.82:1
1750 Output RPM 339 167 115 70 59

1150 Output RPM 223 110 76 46 39

850 Output RPM 165 81 56 34 29

690 Output RPM 134 66 45 28 23

100 Output RPM 19.4 9.6 6.6 4.0 3.3
F-48 CALL: (605) 225-0360 FAX: (605) 225-0567


11-3/4
3/4 11 5
6-1/8
41/64 DIA. HOLE
1-5/16 TYP. 1-1/2
1-1/2
5/8 X 5/16 KEYWAY
4 EFF. LGTH.
2.437
5 2.436
20-27/32
6.890 1/2 NPT (7)
C.D. 4-23/32
1-1/8
TYP.
1-9/32
30-21/32
9.000 1 1 X 1/4
C.D. KEYWAY
4.4375
4.4405
1-5/16
TYP.
9-3/4
3/4 DIA. BOLTS
13-5/8
1-1/2
18-3/4
9-3/8 F
E DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. SHAFT MOUNTED UNITS
SEE CHART FOR
(QTY) J HOLES ON K B.C. CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST. REQUIRE TORQUE ARMS.
G FOR EACH FLANGE SIZE TORQUE ARM KITS ARE
AVAILABLE See Page F-53.
M M M
D
ADDITIONAL RATIOS,
BORES ARE AVAILABLE

1-3/8 SAE C-2 SAE B-4
SAE A-2CL
Double Reduction
SAE C-4
H
SAE B-2 DRY SHIPPING WEIGHT 725 LBS.
INPUT BUSHING SIZES

D
OPTIONAL LOW SPEED
1.125 DIA. - 1/4 X 1/8 KW 1 - 6B SPLINE 14T - 12/24 D.P. SPLINE
3, 3-7/16, 3-15/16, 4, 4-3/16 1.250 DIA. - 1/4 X 1/8 KW 9T - 16/32 D.P. SPLINE 15T - 16/32 D.P. SPLINE

A-2 1 3.251 / 3.253 -- 15/16 (2) 3/8 NC 4-3/16 8 8
A-2CL 1 3.251 / 3.253 -- 15/16 (2) 1/2 NC 4-3/16 8 8
B-2 1 4.001 / 4.003 -- 15/16 (2) 1/2 NC 5-3/4 8 8
B-4 1 4.001 / 4.003 -- 15/16 (4) 1/2 NC 5 8 8
C-2 1 5.001 / 5.003 9/16 15/16 (2) 5/8 NC 7-1/8 10-5/8 8-1/2
C-4 1 5.001 / 5.003 9/16 15/16 (4) 1/2 NC 6-3/8 10-5/8 8-1/2
CALL: (605) 225-0360 FAX: (605) 225-0567 F-49

Model HT-100 Shifting Transmission

Features
n Input and output shafts in-line.
n Shifting mechanism allows selection of neutral and

two (2) ratios.
bearing support.
n Heavy-duty ball bearings on input and output shafts.
n Needle bearings on pilot and counter shaft.
n Choice of 1:1 and two (2) standard gear ratios.
n Available with hydraulic flange or shaft input.
n HT-100 manufactured to order only. Consult factory for price
and delivery.
Rating Table
RATIOS
INPUT 1:1 AND 2.20:1 1:1 AND 2.86:1
1750 OUTPUT RPM 1750 797 1750 612
1150 OUTPUT RPM 1150 524 1150 402
850 OUTPUT RPM 850 387 850 297
690 OUTPUT RPM 690 314 690 241
100 OUTPUT RPM 100 46 100 35
Overhung Load - Input 450 LBS.

Output 550 LBS.
F-50 CALL: (605) 225-0360 FAX: (605) 225-0567

Model HT-100 Shifting Transmission

NEUTRAL 1:1 RATIO
2.20:1 RATIO @ 0 @ 11
OR
2.86:1 RATIO
@31.5 4-1/4
11/16
3/8 NPT (5) 1-9/16
5-3/8
3-1/16 R
5.000/5.002
PILOT SAE "C2-4" 4-3/4
DIAMETER FRAME EFF.
7/16 DEEP SPLINE
11-1/4 5-3/4
11/16 DIA. (2)
ON A 7.125 DIA. B.C.
5.687 1-5/8
TYP. (2) 1-3/8 6B
1-1/4 - 14 SPLINE PLCS. SPLINE
12/24 D.P., 30 P.A.
9-16 DIA. (4)

ON A 6.375 DIA. B.C. 2-1/4
15-1/4
3-3/4
4-3/8
2-3/16
8-3/8
F
1-15/16
1/2 NC (4)
4 7/8 DEEP
5-7/16

Alternate Input Design
15-7/16 CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST.
5/16 X 5/32 KEYWAY 5/16 X 5/32 KEYWAY

3 3 2-5/16 EFF. LGTH.
2-5/16 EFF. LGTH.
1.375
1.373
1.375
1.373

STYLES AVAILABLE. 6-11/32 5-1/8

CALL: (605) 225-0360 FAX: (605) 225-0567 F-51

SAE Standards
SAE J744 Hydraulic Power, Pumps
L
E KEY WIDTH C
LS
0.31
R DIA.
Y MAX. X 45 K BASIC (4) PLACES
K
BASIC S
2 BASIC
F 2
DT
P1
C
X MIN. A DIA. S BASIC
DSI TOLERANCES J BASIC

2 PLACE DIMENSIONS 0.030 J
3 PLACE DIMENSIONS 0.010 BASIC P2RAD.
0.06 MIN. 2
SLOTS INSTEAD OF HOLES OPTIONAL (4) PLACES
M DIA. S
DIMENSIONAL SYSTEM REFERENCE: (2) PLACES BASIC B DIA.
0.030 R MAX. ANSI Y 14.5 (1966) 2
0.25 MAX.
S BASIC
LT
W LLIS OPTI0NAL LONG
TORQUE AND HORSEPOWER SAE J498b. CLASS 1. LENGTH SHAFT
REQUIREMENTS NOTED ARE FLAT ROOT SIDE FIT. L
TYPICAL VALUES AND FOR SPLINE DIMENSIONS S 0.31
SHOULD BE CONSIDERED AS REFER TO SPLINE TABLES LL
A GUIDE ONLY. 0.31 LS 0.31
TAPER PER FOOT LA MIN.
1.500 0.002 A E KEY WIDTH E KEY WIDTH
DT Z F DSI
DS3
C
45
SECTION A-A LB
0.06 MIN.
DIMENSION Z IS U MIN. 0.06 MIN.
A NORMAL TO THE KEY
AND AT THE LARGE 0.030 R MAX.
LT L ST
END OF THE TAPER
L CT
TABLE 1 DIMENSIONS OF HYDRAULIC POWER PUMP AND MOTOR MOUNTING FLANGE AND SHAFTS
RELATED TO HORSEPOWER REQUIREMENTS
Shaft Dimensions
Mounting Shafta S1 =
Flange 25,000 psi Straight with Thread Tapered
and C E F C E
Shaft Torque hp at DS1 DT +0.005 LC LS LT +0.001 0.005 DS3 DT +0.005 LCT LST LT +0.001 Z
Size in.-lb. 1000 rpm =-.003 -0.000 -0.003 -0.000
3/8-24 5/16-32
0.500 0.500 0.064
A-A 260 4.25 UNF 0.094 1.125 0.750 0.562 0.125 0.664 UNF 0.078 0.984 0.688 0.500 0.125
0.499 0.499 0.054
2A 2A
1/2-20 1/2-20
0.625 0.625 0.084
A 517 8.25 UNF 0.125 1.344 0.938 0.719 0.1563 0.693 UNF 0.125 1.094 0.688 0.719 0.1563
0.624 0.624 0.074
2A 2A
5/8-18 5/8-18
0.875 0.875 0.131
B 1,852 29.3 UNF 0.156 1.875 1.312 0.906 0.250 0.982 UNF 0.156 1.688 1.125 0.906 0.250
0.874 0.874 0.121
2A 2A
3/4-16 3/4-16
1.000 1.001 0.131
B-B 2,987 47.5 UNF 0.156 2.062 1.500 1.062 0.250 1.106 UNF 0.156 1.938 1.375 1.062 0.250
0.998 0.999 0.121
2A 2A
1-12 1-12
1.250 1.251 0.162
C 5,677 90.0 UNF 0.156 2.625 1.875 1.219 0.3125 1.386 UNF 0.156 1.938 1.375 1.219 0.3125
1.248 1.249 0.152
2A 2A
1-1/8-12 1-1/8-12
1.500 1.501 0.194
C-C 10,777 171 UNF 0.156 2.875 2.125 1.375 0.375 1.664 UNF 0.156 2.438 1.875 1.375 0.375
1.498 1.499 0.184
2A 2A
1-1/4-12 1-1/4-12
1.750 1.751 0.225
D 15,057 239 UNF 0.156 3.500 2.625 1.562 0.4375 1.941 UNF 0.156 2.812 2.125 1.562 0.4375
1.748 1.749 0.215
2A 2A
1-1/4-12 1-1/4-12
1.750 1.751 0.225
E 15,057 238 UNF 0.156 3.500 2.625 1.562 0.4375 1.941 UNF 0.156 2.812 2.125 1.562 0.4375
1.748 1.749 0.215
2A 2A
1-1/4-12
2.001 0.256
F 24,245 285 UNF 0.156 3.562 2.875 1.562 0.500
1.999 0.246
2A
F-52 CALL: (605) 225-0360 FAX: (605) 225-0567

SAE Standards
SAE J744 Hydraulic Power, Pumps
Shaft Dimensions
Shafta S1= Pilot Dimensions
Mounting 25,000 psi 30 deg. Involute Spline Straight without Thread Common to 2 and 4 Bolt Flanges
Flange U E F A W X Y
and Torque hp at Spline min LA LS LB DS1 LS +0.001 LL 0.005 +0.000 +0.000 min max
Shaft Size in.-lb. 1000 rpm -0.000 -0.002 -0.020
9T
0.500
A-A 260 4.25 20/40 0.3760 0.20 0.750 0.06 0.750 0.125 0.554 2.000 0.250 0.00
0.499
DP
9T
0.625
A 517 8.25 16/32 0.4725 0.30 0.938 0.06 0.938 0.1563 2.00 0.693 3.250 0.250 0.00
0.624
DP
13T
0.875
B 1,852 29.3 16/32 0.7225 0.40 1.312 0.06 1.312 0.250 2.50 0.982 4.000 0.380 2.00 0.04
0.874
DP
15T
1.000
B-B 2,987 47.5 16/32 0.8475 0.50 1.500 0.06 1.500 0.250 2.75 1.106 4.000 0.380 2.00 0.04
0.998
DP
14T
1.250
C 5,677 90.0 12/24 1.0497 0.60 1.875 0.09 1.875 0.3125 3.00 1.386 5.000 0.500 2.50 0.04
1.248
DP
17T
1.500
C-C 10,777 171 12/24 1.2997 0.70 2.125 0.09 2.125 0.375 3.25 1.664 5.000 0.500 2.50 0.04
1.498
DP
13T
1.750
D 15,057 239 8/16 1.4530 0.80 2.625 0.12 2.626 0.4375 3.62 1.941 6.000 0.500 2.75 0.04
1.748
DP
13T
1.750
E 15,067 239 8/16 1.4530 0.80 2.625 0.12 2.625 0.4375 3.62 1.941 6.5000 0.625 2.75 0.09
1.748
DP
15T
F 24,245 285 8/16 1.7030 1.00 3.125 0.12 7.000 0.625 2.75 0.09
DP
F
Shafta S1= Flange Dimensions
Mounting 25,000 psi 2 Bolt Type 4 Bolt Type
Flange M R
and Torque hp at K +0.010 P1 B J S +0.010 P2
Shaft Size in.-lb. 1000 rpm -0.005 Radius -0.005
A-A 260 4.25 3.250 0.406 0.38 2.50 0.56
A 517 8.25 4.188 0.438 0.47 3.75 0.72
B 1.852 29.3 5.750 0.562 0.56 4.75 0.99 3.536 0.562 0.56
B-B 2.987 47.5 5.750 0.562 0.56 4.75 0.99 3.536 0.562 0.56
C 5.677 90.0 7.125 0.688 0.62 5.81 1.22 4.508 0.562 0.62
C-C 10.777 171 7.125 0.688 0.62 5.81 1.22 4.508 0.562 0.62
D 15,057 239 9.000 0.812 0.75 7.88 1.55 6.364 0.812 0.75
E 15.057 239 12.500 1.062 1.00 10.62 2.15 8.839 0.812 0.75
F 24.245 285 13.781 1.062 1.00 11.75 2.37 9.745 1.062 1.00
a
Torsional stress calculated at spline shaft undercut (U dimension, min) with no stress riser considered.
Torque and horsepower requirements noted are typical values and should be considered as a guide only.
Accessories DD
EE
TORQUE ARMS
Torque BB BB CC FF AA
AA DD EE GG HH
Arm Max. Min. Bolts Bolts GG HH
7/16
A 5/8 19-5/16 13-5/16 1-1/2 1-5/16 3/8 3 4
Dia. CC BOLTS
5/8 BB MIN.
B 15/16 35-1/8 23-1/8 2-3/8 1-3/4 5/8 4-1/2 6 BB MAX.
Dia. FF BOLTS
TORQUE ARMS APPLICATION CHART

Torque Mod. Mod. Mod. Mod. Mod. Mod. Mod. Mod. Mod. Mod. Mod. Mod. Mod.
Arm 1 2 3 4 5 6 75 8 52 83L 89 85L 95L
A X X X X X X X X X
B X X X X
CALL: (605) 225-0360 FAX: (605) 225-0567 F-53

Factory Options
The following factory options are available for gear drives in this catalog. Contact the factory for details on price,
availability, and specifications.
CleanLine
When application conditions demand premium washdown duty gear drives.
Features
FDA approved white acrylic paint
Corrosion resistant shaft treatment or stainless steel shafts
Stainless steel hardware and nameplate
Options
Motorized versions
BISSC Standards
Metric Versions
Features
Metric Motor flanges
Metric shaft dimensions
Metric mounting dimensions
Options
Motorized versions
Modified and Custom Designs
Backstops
Backstops are available for applications that require the prevention of reverse rotation. Backstops must be factory
assembled.
Modified and Custom Designs

If you have looked through this catalog and do not see exactly what you need, Hub City has the capability and engi-
neering expertise to design and produce a special drive. Capabilities range from flange and shaft modifications, to
custom housing dimensions. Consult the factory or your Hub City representative with your specifications.
F-54 CALL: (605) 225-0360 FAX: (605) 225-0567

ParallelShaftDrives Dimension Drawing For Cad

Uploaded by

Copyright:

Available Formats

ParallelShaftDrives Dimension Drawing For Cad

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ParallelShaftDrives Dimension Drawing For Cad

Uploaded by

Copyright:

Available Formats

HUB CITY PARALLEL SHAFT DRIVES

CALL: (605) 225-0360 FAX: (605) 225-0567 F-1

Parallel SHAFT Drives

Output Torque to 120,000 inch/lbs

Ratios from 1:1 through 70:1

Output Speeds 24 rpm to 2400 rpm

Alloy shafting for greater strength.

F-2 CALL: (605) 225-0360 FAX: (605) 225-0567

Units can be specified for torque to 122,361 lb.-in., horsepower

This catalog includes representative standard Hub City EFFICIENCY

Input Configuration Descriptions

For shaft mounted units also specify output bore size.

CALL: (605) 225-0360 FAX: (605) 225-0567 F-3

Quick Model Selection

F-4 CALL: (605) 225-0360 FAX: (605) 225-0567

Quick Model Selection

Table 5 Output Torque Selection

OUTPUT MODEL NUMBERS

CALL: (605) 225-0360 FAX: (605) 225-0567 F-5

Models RM1, RM2, RM3 - Single Reduction

n Can be used as reducer or increaser.

n Provides additional reduction capability when mounted onto Helical

n Double lip seals.

n Base mounting available.

n Permanently lubricated at factory.

Model Nomenclature Example

Ratio Multiplier Unit Size

F-6 CALL: (605) 225-0360 FAX: (605) 225-0567

models RM1 & RM2 - single reduction

AK DIA. BORE DIA. 2.06

2.81 KWY .188 x .094

48C 3.75 3.00 3.88 4.36 .28 .500 1/8 x 1/16 19

** keyway width by depth.

*keyway width by depth

CALL: (605) 225-0360 FAX: (605) 225-0567 F-7

model RM3 - single reduction

MOUNTING BASE FOR RATIO MULTIPLIERS

F-8 CALL: (605) 225-0360 FAX: (605) 225-0567

models ARM1Q & ARM2Q - single reduction

Frame Input Input Output WEIGHT

Frame Input Input Output WEIGHT

See Page F-8 for Foot Mounting Kits.

CALL: (605) 225-0360 FAX: (605) 225-0567 F-9

Model 22 - Single Reduction

n Choice of four (4) standard gear ratios.

SINGLE REDUCTION UNITS PROVIDE OPPOSITE DIRECTION

PART NO. 0229-00026 3

F-10 CALL: (605) 225-0360 FAX: (605) 225-0567

Model 22 - Single Reduction

1/4 X 1/8 KEYWAY 3-1/8

3/8 NPT (4)

1-7/8 DRYSHIPPING WEIGHT 24 LBS.

Standard Styles Available  INDICATES HIGH SPEED SHAFT. OTHER

STYLE A STYLE C STYLE DO STYLE SO

CONSULT FACTORY FOR VERTICAL SHAFT LUBRICATION RECOMMENDATIONS

CALL: (605) 225-0360 FAX: (605) 225-0567 F-11

Model 230 - Single Reduction

 INGLE REDUCTION UNITS PROVIDE OPPOSITE DIRECTION

F-12 CALL: (605) 225-0360 FAX: (605) 225-0567

n Provides additional reduction capability when mounted onto Helical

n Choice of four (4) standard gear ratios.

Standard Styles Available INDICATES HIGH SPEED SHAFT. OTHER

INGLE REDUCTION UNITS PROVIDE OPPOSITE DIRECTION

INDICATES HIGH SPEED SHAFT. OTHER

Standard Styles Available INDICATES HIGH SPEED SHAFT. OTHER

INGLE REDUCTION UNITS PROVIDE OPPOSITE DIRECTION

Standard Styles Available INDICATES HIGH SPEED SHAFT. OTHER