Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    Performance Sheet Drill Pipe: Pipe Body: Tubular Assembly

    Uploaded by

    Johns
    The document provides technical specifications for a drill pipe including its dimensions, material properties, pressure ratings, and performance details. It specifies attributes like the outer diameter, wall thickness, tensile strength, internal pressure rating, and tool joint specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Performance Sheet Drill Pipe: Pipe Body: Tubular Assembly

    Uploaded by

    Johns
    25 views1 page
    The document provides technical specifications for a drill pipe including its dimensions, material properties, pressure ratings, and performance details. It specifies attributes like the outer diameter, wall thickness, tensile strength, internal pressure rating, and tool joint specifications.

    Original Description:

    WS36-11_DPPS

    Original Title

    WS36-11_DPPS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides technical specifications for a drill pipe including its dimensions, material properties, pressure ratings, and performance details. It specifies attributes like the outer diameter, wall thickness, tensile strength, internal pressure rating, and tool joint specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views1 page

    Performance Sheet Drill Pipe: Pipe Body: Tubular Assembly

    Uploaded by

    Johns
    The document provides technical specifications for a drill pipe including its dimensions, material properties, pressure ratings, and performance details. It specifies attributes like the outer diameter, wall thickness, tensile strength, internal pressure rating, and tool joint specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Size and Weight: 2.875'' 10.40 ppf 0.

    362'' wall EU
    Grade: V-150
    Drill Pipe Performance Sheet Range: 2
    Asset Number: WS36-11 Tool Joint: 3.500'' x 1.500'' CTM26

    Pipe Body: Tubular Assembly:


    Nominal Ultra Class Premium
    100% RBW 95% RBW 90% RBW 80% RBW Adjusted Weight (lbs/ft): 11.72 Fluid Displacement (gal/ft): 0.18
    Approximate Length (ft): 32.0 Fluid Displacement (bbls/ft): 0.0043
    OD (in): 2.875 2.839 2.803 2.730
    Wall Thickness (in): 0.362 0.344 0.326 0.290 Box TJ Length (in): 15 Fluid Capacity w/IPC (gal/ft): 0.17
    Nominal ID (in): 2.151 2.151 2.151 2.151 Pin TJ Length (in): 13 Fluid Capacity w/IPC (bbls/ft): 0.0041

    Tensile Strength (lbs): 428,688 404,321 380,262 333,070 Upset Type: EU Fluid Capacity w/o IPC (gal/ft): 0.17
    Torsional Strength (ft-lbs): 23,109 21,719 20,357 17,716 Max Upset OD (in): 3.188 Fluid Capacity w/o IPC (bbls/ft): 0.0041
    Drift Size (in): 1.375
    Burst Capacity (psi): 33,052 35,885 33,997 30,219
    Collapse Capacity (psi): 33,018 31,940 30,821 28,446

    18
    0

    Note: These are OEM values that may vary with actual values due to mill tolerances, IPC tolerances, OEM rounding, and other
    Notes: Body properties are calculated based on uniform OD and wall thickness. factors. Pipe is purchased at a guaranteed 95% RBW. IPC is applied to a nominal thickness of 0.009''. Pipe will have an ID of
    Burst capacity for Nominal (100% RBW) based on 87.5% RBW per API. 2.093'', which is smaller than pipe purchased at 87.5%.

    Connection: CTM26 Elevator Shoulder:


    TJ OD (in): 3.500
    TJ ID (in): 1.500
    MYS (ksi): 135 Maximum MUT (ft-lbs): 8,800 Smooth Edge Height (in): N/A
    Tension at Shoulder Separation @ Max MUT (lbs): Tensile Limited Smooth Edge OD (in): N/A
    Tension at Connection Yield @ Max MUT (lbs): 361,200 SE Elevator Shoulder Capacity (lbs): N/A

    Minimum MUT (ft-lbs): 8,400 Nominal TJ OD (in): 3.500


    Tension at Shoulder Separation @ Min MUT (lbs): Tensile Limited Nominal TJ OD Elevator Shoulder Capacity (lbs): 128,200
    Tension at Connection Yield @ Min MUT (lbs): 361,200
    MUT values are based on a friction factor of 1.0. A copper-based thread compound must be used to achieve the pressure rating Assumed Elevator Bore (in): 3.281
    for this connection.

    Internal Pressure Rating (psi): 25,000 Tool Joint Torsional Strength (ft-lbs): 14,700
    External Pressure Rating (psi): 10,000 Tool Joint Tensile Strength (lbs): 409,200
    CTM26 is a trademark of NOV Grant-Prideco. This asset must be handled with a lift nubbin after a certain footage. For more information, please consult Workstings Operations.

    The technical information containted herein, including the product performance sheet and other attached documents, has been extracted from information available from the manufacturer and is for reference only and not a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical
    information. Workstrings International cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various
    inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operation limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices,
    and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box IDs, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.

    www.workstringsinternational.com 24-Feb-16
    Download the Workstrings International Pipe Specification App on the App Store or Google Play

    You might also like